summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-23intel/fsp_baytrail: Fix logging of ISPEnable optionDavid Imhoff
Before this fix the value of PcdEnableSdio was printed as the MIPI/ISP configuration option. TEST=Built and booted on Minnowboard Max Change-Id: Ia9b02d520f4e615f90b45935456b9d97c5d00f11 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-10-23asrock/e350m1: disable unconnected GPP PCIe clocksFelix Held
connections checked by desoldering the FCH and looking at the PCB this lowers the power consumption by about 150-200mW measured on primary side based on change #5397 Change-Id: I986c4cc73a247994f2a47fdfd03f585069ca9385 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/11866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-23cbfstool: Make sure fileno is available on CygwinStefan Reinauer
This patch fixes compilation of cbfstool on Cygwin. As reported in http://review.coreboot.org/#/c/10027 cbfstool on Cygwin likes to be compiled with -D_GNU_SOURCE. That patch was abandoned because it would unwantedly turn on more GNU extensions. Instead of doing that, only enable the define on Cygwin, switch to -std=gnu99 instead of -std=c99 to make fileno and strdup actually available. A MINGW32 check that was forgotten in Makefile was copied over from Makefile.inc to keep the two files in sync. This patch has no impact on non-Windows builds. Change-Id: I068b181d67daf9c7280110e64aefb634aa20c69b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11667 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-10-23SB800-mainboards: use write8 to disable unused GPP CLKFelix Held
don't use non-volatile pointers for MMIO access Change-Id: I9f38012a806e43f2535265f1d25537c59b53904e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/12081 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23superio/nuvoton/nct5572d: Enable power state after power failure supportTimothy Pearson
Change-Id: Ia0313b9ecd64c9e6f99a140772ebb35abe0175fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11950 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23northbridge/amd/amdmct: Fix Family 15h detectionTimothy Pearson
Change-Id: I3623f8945bd62b7050ec609934f96543552c792b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12018 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-23southbridge/amd/sr5650: Fix GPP3a link training in higher width modesTimothy Pearson
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11990 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23device/hypertransport: Add additional debug outputTimothy Pearson
Change-Id: I94b870f47581a4a2591d02eeb37627666e0f4297 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11945 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-23cpu/amd/model_10xxx: Clean up debugging statementsTimothy Pearson
Change-Id: I6dff74b3857e1fb384aefc87b44e7679bd4aab07 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11948 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23northbridge/amd/amdmct/mct_ddr3: Fix curly brace style violationsTimothy Pearson
Change-Id: Ic27d404a7ed76b58043037e8b66097db6d664501 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11942 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23include/smbios: Update SMBIOS memory structures to version 2.8Timothy Pearson
Change-Id: Icda915933c4ebf3a735d9e1d4e4dbb1138a06b39 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11955 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-23intel/cougar_canyon2: fix buildPatrick Georgi
The reintroduction of cougar_canyon2 crossed beams with the moving the GMA display brightness data in ACPI into individual mainboards. Make things build again by having the board use the same default values that it used to use automatically. They may be wrong, but no worse than what was there before. Change-Id: Id788034c38b42e1c35d9cd17e9bbb2ce49e3e91c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12132 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-23MAINTAINERS: Add script to test database and find maintainersStefan Reinauer
This utility should make it easier to complete and maintain the database of coreboot subsystem maintainers (MAINTAINERS file) This will need a bit of tender love and care to print information in an easily machine readable output for the build system, but its a first start to query the maintainers database. Build with: $ go build util/scripts/maintainers.go Find a maintainer for a set of files with: $ ./maintainers Makefile Makefile.inc Makefile is in subsystem BUILD SYSTEM Maintainers: [Patrick Georgi <patrick@georgi-clan.de>] Makefile.inc is in subsystem BUILD SYSTEM Maintainers: [Patrick Georgi <patrick@georgi-clan.de>] Check the maintainer database with: $ ./maintainers .gitignore has no subsystem defined in MAINTAINERS .gitmodules has no subsystem defined in MAINTAINERS .gitreview has no subsystem defined in MAINTAINERS 3rdparty/arm-trusted-firmware has no subsystem defined in MAINTAINERS 3rdparty/blobs has no subsystem defined in MAINTAINERS 3rdparty/vboot has no subsystem defined in MAINTAINERS COPYING has no subsystem defined in MAINTAINERS Documentation/AMD-S3.txt has no subsystem defined in MAINTAINERS Documentation/CorebootBuildingGuide.tex has no subsystem defined in MAINTAINERS Documentation/Doxyfile.coreboot has no subsystem defined in MAINTAINERS [..] Change-Id: I49c43911971152b0e4d626ccdeb33c088e362695 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23northbridge/amd/amdfam10: Fix typo in commentTimothy Pearson
Change-Id: I0a9b3a66231052622c862bae32b900f52f6efba9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11944 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23cbfstool: Fix tolower() calls on CygwinStefan Reinauer
Cygwin complains: cbfstool.c: 1075:5 error: array subscript has type 'char' [-Werror=char-subscripts] so add an explicit cast. Change-Id: Ie89153518d6af2bacce3f48fc7952fee17a688dd Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11666 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-22allocator: Page align memory mapped PCI resourcesNico Huber
To help hypervisors to assign PCI devices individually to virtualization guests, page align dynamically allocated MMIO resources. Tested with kontron/ktqm77 which has dynamically configured onboard devices on the root bus and secondary buses. Booted Linux and checked the configuration with `lspci -v`. Got the configuration through Muen's tools which are very picky about overlapping and alignment. Booted a Muen based system that uses many onboard devices. GMA, xHCI and one NIC (on a secondary bus) were verified to function properly. Change-Id: I2b7115070e1ccad64565feff025289732c3b5e66 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12111 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-22cbfstool/Makefile: Also rm fmd_(parser|scanner).[ch] in cleanNico Huber
Change-Id: I783aa4b2319aaedd57ce9a67ca935392a611298f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12127 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22cbfstool/Makefile: Drop unused, irritating definition of `obj`Nico Huber
Change-Id: Id8dda8a973dcf991ac494c2d50258d1b51e43c6a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22gma ACPI: Make brightness levels a per board settingNico Huber
Those are actually board specific. Keep the old value as defaults, though. The defaults are included by all affected boards. Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-22model_fxx/powernow: add dual core Socket F TDPsJonathan A. Kollasch
Values based on correlation of brand strings, brand numbers and the TDP listings on AMD's web site (Wikipedia for Athlon 64 FX-7x TDPs). Change-Id: I7e6d12d0b6cc4fefc3f84076234c62c40e08304c Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10926 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-10-22Revert "Remove sandybridge and ivybridge FSP code path"Martin Roth
Please don't remove chipsets and mainboards without discussion and input from the owners. Someone was asking about cougar canyon 2 just a couple of weeks ago - there's obviously still interest. This reverts commit fb50124d22014742b6990a95df87a7a828e891b6. Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/12128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22MAINTAINERS: Fix format for file entries (F:)Stefan Reinauer
According to the documentation further up in the file: F: drivers/net/ all files in and below drivers/net F: drivers/net/* all files in drivers/net, but not below F: */net/* all files in "any top level directory"/net Add trailing slashes to directory names. Change-Id: I7bfd2eb2528a75fb6af79a990acb89f5e4251383 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12118 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-20libpayload: Add ptrdiff_t typedefPatrick Georgi
vboot2 in payloads (eg depthcharge) needs it. Change-Id: I4e79ae29cc282c8680f21686befd35c4ff461b3a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11922 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-20Enable MULTIPLE_CBFS_INSTANCES on x86, tooPatrick Georgi
It works there, we want it, disable that restriction. Change-Id: Idc023775f0750c980c989bff10486550e4ad1374 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/12094 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-20Revert "coreboot_table: don't add CMOS checksum twice."Nico Huber
This reverts commit e6606518243d9beda31693d40493b5f7a1a3e2e0. After some discussion on IRC we decided to revert it as libpayload can only read the copy that was removed (and other users like nvramtool can only read the other copy). So we need both copies at this time. Signed-off-by: Nico Huber <nico.h@gmx.de> Change-Id: I6cf6b2a1523d771bb52f3d5720b1b16ed4b348db Reviewed-on: http://review.coreboot.org/11696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-19cbfstool: Fix typo in error messagePatrick Georgi
Change-Id: Iaee7e2c74fe9f63d4d4878278bd445af393942f4 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11920 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-19vendorcode/google: Deal with MULTIPLE_CBFS_INSTANCESPatrick Georgi
We need to special-case filling out the vboot structures when we use CBFS instead of vboot's custom indexed format, otherwise (due to the way the CBFS header looks), it will try to write several million entries. Change-Id: Ie1289d4a19060bac48089ff70e5cfc04a2de373f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11914 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-18Makefile.inc: Put every tool in `TOOLLIST` on separate linePaul Menzel
This way, commit differences will be easier to read. Also sort the list lexicographically. Change-Id: I4ce3ac9018a3fddf5e30d7c1ac0c57090fac1d3d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12084 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-17armv7: Word-sized/half-word-sized memory operations for 32/16 bit read/writePaul Kocialkowski
Some registers only allow word-sized or half-word-sized operations and will cause a data fault when accessed with byte-sized operations. However, the compiler may or may not break such an operation into smaller (byte-sized) chunks. Thus, we need to reliably perform word-sized operations for 32 bit read/write and half-word-sized operations for 16 bit read/write. This is particularly the case on the rk3288 SRAM registers, where the watchdog tombstone is stored. Moving to GCC 5.2.0 introduced a change of strategy in the compiler, where a 32 bit read would be broken into byte-sized chunks, which caused a data fault when accessing the watchdog tombstone register. The definitions for byte-sized memory operations are also adapted to stay consistent with the rest. Change-Id: I1fb3fc139e0a813acf9d70f14386a9603c9f9ede Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11698 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-17cbfstool: Fix removing and adding file with same nameAaron Durbin
Currently, cbfstool regressed that removing a file from CBFS the space is marked as empty but the filename is still shown, preventing adding a file with the same name again. [1] ``` $ echo a > a $ echo b > b $ ./util/cbfstool/cbfstool test.rom create -m x86 -s 1024 Created CBFS (capacity = 920 bytes) $ ./util/cbfstool/cbfstool test.rom add -f a -n a -t raw $ ./util/cbfstool/cbfstool test.rom add -f b -n b -t raw $ cp test.rom test.rom.original $ ./util/cbfstool/cbfstool test.rom remove -n $ diff -up <(hexdump -C test.rom.original) <(hexdump -C test.rom) --- /dev/fd/63 2015-08-07 08:43:42.118430961 -0500 +++ /dev/fd/62 2015-08-07 08:43:42.114430961 -0500 @@ -1,4 +1,4 @@ -00000000 4c 41 52 43 48 49 56 45 00 00 00 02 00 00 00 50 |LARCHIVE.......P| +00000000 4c 41 52 43 48 49 56 45 00 00 00 02 ff ff ff ff |LARCHIVE........| 00000010 00 00 00 00 00 00 00 28 61 00 00 00 00 00 00 00 |.......(a.......| 00000020 00 00 00 00 00 00 00 00 61 0a ff ff ff ff ff ff |........a.......| 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| $ ./util/cbfstool/cbfstool test.rom add -f c -n c -t raw $ ./util/cbfstool/cbfstool test.rom print test.rom: 1 kB, bootblocksize 0, romsize 1024, offset 0x0 alignment: 64 bytes, architecture: x86 Name Offset Type Size c 0x0 raw 2 b 0x40 raw 2 (empty) 0x80 null 792 ``` So it is “deteled” as the type changed. But the name was not changed to match the *(empty)* heuristic. So also adapt the name when removing a file by writing a null byte to the beginning of the name, so that the heuristic works. (Though remove doesn't really clear contents.) ``` $ ./util/cbfstool/cbfstool test.rom remove -n c $ ./util/cbfstool/cbfstool test.rom print test.rom: 1 kB, bootblocksize 0, romsize 1024, offset 0x0 alignment: 64 bytes, architecture: x86 Name Offset Type Size (empty) 0x0 null 2 b 0x40 raw 2 (empty) 0x80 null 792 ``` [1] http://www.coreboot.org/pipermail/coreboot/2015-August/080201.html Change-Id: I033456ab10e3e1b402ac2374f3a887cefd3e5abf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11632 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-17cbfstool/cbfs_image.c: Just use one space before `=`Paul Menzel
Change-Id: Id31c889d1e83e7ddfb0f0f98b78601f37b71cfa2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11631 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17coreinfo: reboot when finishedMaxime de Roucy
Behave as nvramcui. Avoid a "General Protection Fault Exception" when launched by SeaBIOS on pcengines APU1. Change-Id: I00b1f859f76e693e8d49a38c1e02f4f49add85b7 Signed-off-by: Maxime de Roucy <maxime.deroucy@gmail.com> Reviewed-on: http://review.coreboot.org/11731 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17libpayload/Kconfig: Use official spelling for TinyCursesPaul Menzel
TinyCursess is officially spelled in CamelCase [1]. [1] https://github.com/tommyettinger/TinyCurses Change-Id: I7e0aa5af54140796a981c0f4c58950b25fdd67ba Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11727 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17libpayload/configs: Add default configuration with TinyCurses enabledPaul Menzel
Change-Id: Ib057e2b5f15b8d5bcdf45666f8761614317d25ee Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11726 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17Add junit.xml code to top Makefile.inc instead of utilsMartin Roth
Instead of adding code to generate the junit.xml file for jenkins to each of the util makefiles, add it once to the top level Makefile.inc. Create a list of tools to run the test on. Add nvramtool and inteltool to the list of utilities tested. Note that the util builds depend on implicit rules, so MFLAGS and MAKEFLAGS have to be cleared to get the builds to work. Change-Id: Id7ee5ea41ce3bf4a40fb50942ae785bb838fa639 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11910 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17kontron/ktqm77: Tag all four USB3 ports switchable and SS capableNico Huber
With the introduction of these options in commit b26156e (bd82x6x/xhci: Set mask of ports switchable between USB2 and USB3.) the default regressed to disable these capabilities. Maybe other boards regressed too. I didn't check. Change-Id: I220896e656d00145618e61d55b74904517c7d855 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11287 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17enable lint-stable build on jenkinsMartin Roth
This will run the lint-stable scripts on jenkins to block a commit with obvious and known errors. It runs in under a second on my system, so shouldn't contribute to any real delay on jenkins. Change-Id: I6ff3468ec29dc4ccd0c115f2c26e26b291c507df Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11892 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-17lint: Fix shellcheck warnings, add commentsMartin Roth
When the script was pulled out of the makefile, it was left as it was written in the makefile to show the continuity with the original. This patch cleans up issues identified by shellcheck and adds comments. Change-Id: I5e6573a4fdfbb397e15db38e2e3dfadeb3430573 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11931 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17lint: Add junit.xml output for jenkinsMartin Roth
To add lint to jenkins testing, we need junit.xml output. This adds an optional --junit command line parameter to enable output to an xml file in the lint directory. Change-Id: I5588190cb050b9dbe99458cb18a71a147769f50e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11891 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17lint: Move the lint script out of Makefile.incMartin Roth
In preparation for adding junit xml to the lint tests, move the script out of Makefile.inc and into its own file. Add a copyright, usage, and error checking that was not needed inside the Makefile. Change-Id: I32bebc6a5f1f6fa652812c8a014d84006e2e6c8a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11890 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-16auron: Remove duplicate pei_data assignmentShawn Nematbakhsh
Merge artifact -- don't check spd_index twice. BUG=None TEST=Build only BRANCH=Auron Original-Change-Id: I0cc372fec415646854aa931949ed0f57b473cb01 Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234421 Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> (cherry picked from commit 850125141b52886c845161434a1320676e59534d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0070e3f26ebddba716905ebb934bcec4715c4b05 Reviewed-on: http://review.coreboot.org/11912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-16intel/southbridge/bd82x6x: Add option to set SPI VSCC registersNico Huber
These are needed for the hardware-sequencing function of the PCH SPI interface. Values are specific to the flash chip used on a board. Change-Id: Id06766b4bac2686406bc09b8afa02f311f40dee7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11798 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-10-16auron: fix can not recognize 4G memoryTim Chen
Part of the following patch was lost in the merge from chromium. This patch fixes up the spd_index for the copy from the SPD file. In spd.c "spd_index *= SPD_LEN" will change the original spd_index from gpio and let the following if(spd_index>3) to misjudge and disable channel 1 incorrectly. So we calculate the index for spd file memcpy when calling memcpy(). BUG=chrome-os-partner:32879 TEST=Can get total memory 4G on yuna 4G SKU BRANCH=Auron Original-Change-Id: Iebc49e20e4ca15ef6db8c4defe43cc22382a28bf Original-Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234420 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Original-Commit-Queue: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> (cherry picked from commit 3b1fce58b7b4b15e947b40fd011174d4e8e294bc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I03f9d63623e083c99d349d938fd802d828858f70 Reviewed-on: http://review.coreboot.org/11911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Georg Wicherski <gw@oxff.net> Tested-by: build bot (Jenkins)
2015-10-16southbridge/amd/sr5650: Remove unnecessary register configurationTimothy Pearson
Do not hardcode the CPU downstream non-posted request limit; the value of this register is CPU family specific and is set appropriately in the corresponding CPU driver code. Change-Id: I432b942f114243cba23c9a8d916cf6d07bc4740b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11935 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-16arch/x86/smbios: Add Crucial DIMM manufacturer IDTimothy Pearson
Change-Id: I975142351c0c033f9dc44670dcf819d296896921 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11934 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-10-16arch/x86/boot/smbios: Add SPD IDs for Kingston and CorsairTimothy Pearson
Change-Id: I6a32b69d3b75d7d086dc7f8ea1e195473399f406 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11933 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-10-16util/cbmem: Fix failure with certain cbmem base alignmentsTimothy Pearson
Change-Id: Icd28af388c49ad36d7a8e414b3c82e18e1f8f523 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11932 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-16bootblock: Link timestamp.c only with EARLY_CBMEM_INITPaul Menzel
Commit dbeedbef (arch/x86/bootblock: Link in object files selected with bootblock-y) breaks building of x86 boards with `CONFIG_EARLY_CBMEM_INIT` *not* selected but CBMEM time stamp collection enabled. Aaron Durbin explained as below [1] and provided this patch to fix it. > That change actually processes bootblock-objs where before it never did > such a thing. I'm sure this isn’t the only issue lurking. bootblock on > x86 implied romcc and thus all the bootblock-y += rules that other > architectures use worked, but now all the implied assumptions are no > longer true on x86. > > timestamp stuff on x86 !CONFIG_EARLY_CBMEM_INIT is the issue you're > seeing. In order to compile timestamp.c for bootblock under these > conditions will mean there needs to be some more Makefile guarding. [1] http://review.coreboot.org/11864 Change-Id: I3441b9fcdbbc8bbe82b9f2075e60668a846ecf09 Fix-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-10-16cpu/amd/model_10xxx: Install AMD-provided microcode files in CBFSTimothy Pearson
Change-Id: I208b012c6b612a94b3bbc8235d5a005028be8bcc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11832 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-15cpu/x86/mtrr: Add MTRR index and total MTRRs to error messagePaul Menzel
Change-Id: I626a11c17c9d05c174c507d50684e498c8604cbc Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11905 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-15soc/intel/broadwell: fix USBDEBUG copy-pastaGeorg Wicherski
The broadwell soc code was upstreamed based off an old coreboot branch and apparently never tested with USBDEBUG. This changeset fixes USBDEBUG on the not yet upstreamed Auron-Paine board, as verified with a FT232H setup. The fix is simply removing outdated code that since branching off had been deduplicated in upstream coreboot, anyway. Change-Id: I53c924aa2a5357ed8313d0c9eaa2f9f9e132345e Signed-off-by: Georg Wicherski <gwicherski@gmail.com> Reviewed-on: http://review.coreboot.org/11874 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-15Update 'what-jenkins-does' makefile target for junit filenameMartin Roth
Instead of renaming the junit filename, send abuild the desired name on the command line. Change-Id: I779bc180343bd549908750d7128bedbab7f36266 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11879 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-15abuild: add a command line parameter for junit filenameMartin Roth
The 'what-jenkins-does' makefile target was renaming the junit filename after abuild finished. Instead, just add a command line parameter to send it to a different filename. Change-Id: I66f7d80d621573d77a5154f36f2db49d7b2e948a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11878 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-15pcengines/apu1: Fill serial number in SMBIOSKyösti Mälkki
Serial number is derived from the MAC address of first NIC. Change-Id: I91e5555b462cca87d48fb56c83aedd1eb02eba62 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/11901 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-10-15pcengines/apu1: Fix CRCs in SPD fileKyösti Mälkki
Do this to wipe error message and hexdump of SPD from console log. Change-Id: I45ffcb1c80aecf43b79d93faedcd62c8f0023cb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/11900 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-15pcengines/apu1: Fix SPD for 4GB modelKyösti Mälkki
Value of tRFCmin was incorrectly using 2 Gigabit chip data. There was no observed instability or bug reports because of this. Change-Id: Ifa03b883afa5a304dd20caf3d4d0383c6cfebdb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/11899 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-15ec/google: Move label to BOL to satisfy lint-testsPatrick Georgi
Change-Id: I3a42ba9494b5174920e36e3110b8d62d721fe742 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11886 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-15nvidia/tegra210: Drop FSF addressPatrick Georgi
Change-Id: Ia158b4c6c12fb6e22ea7fed9035574a3abedf98c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11885 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR, we also remove the _MSR suffix, as they are, by definition, MSRs. Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-14Revert "Remove FSP Rangeley SOC and mohonpeak board support"Martin Roth
This chip is still being used and should not have been deleted. It's a current intel chip, and doesn't even require an ME binary. This reverts commit 959478a763c16688d43752adbae2c76e7764da45. Change-Id: I78594871f87af6e882a245077b59727e15f8021a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11860 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-14cpu/amd/microcode: Update parser to use stock microcode blobsAudrey Pearson
The existing microcode update system used custom, manually generated microcode blob files. This made updates very difficult. Update parser to use stock microcode update files as provided by AMD. Change-Id: I772b264ad167f2a5d629dab5d64d9b0ccab3a053 Signed-off-by: Audrey Pearson <apearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11829 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-10-14skylake: ACPI: Fix compiler warnings with iasl-20150717Duncan Laurie
Updating to a new IASL introduces a lot of warnings that are not serious issues but can be fixed with some reworks. - Method local variables that are set but never used now warn, when needing to read back a register the ordering is now changed to set the value in Local0 first so the compiler does not complain. - Methods that create an object must be serialized - A ResourceTemplate declared inside a _CRS with a named variable does not seem to be able to compile without a warning. To fix this move the ResourceTemplate outside the _CRS method. - The DPTF CPU code was still using the old legacy \_PR.CPUx instead of the new \_PR.CPxx definitions. BUG=chrome-os-partner:44622 BRANCH=none TEST=build glados with iasl-20150717 and see no warnings Original-Change-Id: I4a66c7eb6495aac4ae1aa42100c846725c1a04d2 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302168 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia3af802ca2faab4f1c59e73f2ce31a65c7e862e0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11812 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-10-14fsp1_1: add verstage supportAaron Durbin
In order to support verstage the cache-as-ram split is taken advantage of such that verstage has the cache-as-ram setup and rosmtage has the cache-as-ram tear down path. The verstage proper just initializes the console and attempts to run romstage which triggers the vboot verification of the firmware. In order to pass the current FSP to use during romstage a global variable in cache-as-ram is populated before returning to the assembly code which tears down cache-as-ram. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados with verstage support as well as VBOOT_DYNAMIC_WORK_BUFFER with direct link in romstage. Change-Id: I8de74a41387ac914b03c9da67fd80f8b91e9e7ca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11824 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-14x86: add standalone verstage supportAaron Durbin
To support x86 verstage one needs a working buffer for vboot. That buffer resides in the cache-as-ram region which persists across verstage and romstage. The current assumption is that verstage brings cache-as-ram up and romstage tears cache-as-ram down. The timestamp, cbmem console, and the vboot work buffer are persistent through in both romstage and verstage. The vboot work buffer as well as the cbmem console are permanently destroyed once cache-as-ram is torn down. The timestamp region is migrated. When verstage is enabled the assumption is that _start is the romstage entry point. It's currently expected that the chipset provides the entry point to romstage when verstage is employed. Also, the car_var_*() APIs use direct access when in verstage since its expected verstage does not tear down cache-as-ram. Lastly, supporting files were added to verstage-y such that an x86 verstage will build and link. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados using separate verstage. Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11822 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-14vboot: allow more flexibility when adding verstageAaron Durbin
When a separate verstage is employed the verstage file was just being added through the cbfs-files mechanism. However, that doesn't allow one to specify other flags that aren't supported that an architecture may require. The x86 architecture is one of those entities in that it needs its verstage to be XIP. To that end provide a mechanism for adding verstage with options. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados using his mechansim on x86. Change-Id: Iaba053a55a4d84d8455026e7d6fa548744edaa28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11819 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-14sandy/ivy: Fix PIRQs on ChromebooksKyösti Mälkki
This partially reverts commit 33b535f1. After this commit, samsung/lumpy had its internal USB EHCI controller broken, with no assigned IRQ. PIRQA-PIRQH may be wired as edge-triggered interrupts, making them exclusive for the GPIO to use. They cannot be used for PCI devices at the same time. Change-Id: Ic90343401ac20ca8673baf927cd7703c3481aeab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/9993 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-10-13t132: Add TIMESTAMP region to memlayout.ldFurquan Shaikh
If timestamps need to be enabled for t132-boards, build would break because TIMESTAMP region does not exist. With this change, t132 boards can enable "COLLECT_TIMESTAMPS" without any build error. Change-Id: I283a5ec49b5af95bd524f590e352367b7cbfd83d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/11893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-12gma ACPI: Do not overwrite backlight configurationNico Huber
Changes to CR1 and CR2 were effectively overwriting the backlight configuration from the devicetree with static values. Instead read the maximum brightness value from BCLM (backlight modulation frequency) and calculate the target level (Arg0 is the target level as percentage). Turned out that _BQC has to return a value from the list returned by _BCL. So XBQC got a little heavier to search for the correct value. Change-Id: I35419993c8250c95fc69ba4db30db9dba9e6f8ff Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11704 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-12gma ACPI: Consolidate non-PCH and PCH brightness levelsNico Huber
The two cases only differ in the register locations. As the values in BRIG were all the same, consolidate them. They also got normalized to percentages as the ACPI spec wants that (0x61 was 100% before). Change-Id: I9216a953bb89458ed102c39194ea370cbf463d5e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11703 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-12gma: Consolidate Intel IGD ACPI code some moreNico Huber
Consolidate some common (and mostly broken) code. Will try to fix things in separate commits. Maybe, igd.asl taken from gm45 (the non-PCH case) could also be used for i945 and sch. But this needs further investigation. Change-Id: Id3663bf588458e1e71920b96a3149f96947921e9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11702 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2015-10-11skylake: add support for verstageAaron Durbin
The right files just need to be added to the verstage build. Do that so a stand alone verstage builds and links. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: I2d0c98760494e2f4657ee35b6f155690939d2d18 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11827 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11glados: add chromeos.c to verstageAaron Durbin
In order to build stand alone verstage the chromeos.c file needs to be part of the verstage target. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: Id2b05548e4e10cd12002286913f2228b84802e63 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11828 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-11soc/intel/common: use prog_locate() for finding fsp.binAaron Durbin
The current method was only taking the cbfs path. Because of this fsp.bin was never being utilized from the RW slots. Using prog_locate() now provides both the cbfs and vboot locate methods for free. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: I2b3e088326d5a965ad90806a7950b9f401ed57de Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11831 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-11skylake: Leave SPI controller enabledLee Leahy
Leave the SPI controller enabled upon boot block exit. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Change-Id: I5b10d7cc8d5d350282206abe6a945bab66f97ada Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: http://review.coreboot.org/11825 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11skylake: SPI code cleanupLee Leahy
Move base address into iomap.h. Use PCI symbols instead of SPI specific symbols. Fix comments. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Change-Id: Id5d21603150b52fd1b71dd448105938bd6aff1a9 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: http://review.coreboot.org/11826 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11vboot: prepare for x86 verstageAaron Durbin
In order to support x86 verstage proper the work buffer needs to live in cache-as-ram. However, after cache-as-ram is torn down one still needs the verification results to know which slot was selected. Though the platforms with a dedicated SRAM can just use the work buffer in SRAM, the x86 cache-as-ram platforms need a place to stash the results. For that situation cbmem is employed. This works because when cbmem is initialized cache-as-ram is still enabled. The VBOOT_DYNAMIC_WORK_BUFFER case assumes verified boot doesn't start until after cbmem is up. That doesn't change, but it's a goal to get rid of that option entirely once all other x86 platforms are moved over to pre-romstage vboot. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados with pre-romstage verification as well as VBOOT_DYNAMIC_WORK_BUFFER case. Change-Id: I7eacd0edb2b6ca52b59b74075d17c00b50676d4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11821 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11cbfs: don't load x86 programs over the top of read-only mediaAaron Durbin
On x86 the early stages are currently execute-in-place which means they live in the memory-mapped spi flash. However, when loading romstage from verstage the romstage is execute-in-place so it's unnecessary to write over a read-only media -- not to mention writing to read-only memory is wrong to begin with. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Noted reduction of 20ms when loading romstage. Change-Id: I7cd399302a3925a05fbce82600b4c50ea66a0fcb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11823 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11tegra132: increase romstage size for vbootAaron Durbin
Bump up the romstage size to allow more breathing room. Change-Id: I4df7031d286c13797dccdf2f49d023bbf462fbb8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11830 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11cbmem console: make verstage first class citizenAaron Durbin
The conditions in cbmem console for supporting verstage were implicitly utilizing CONFIG_BOOTBLOCK_CONSOLE to handle the cbmem console enablement. Fix it so verstage is a first class citizen for deciding actions pertaining to cbmem console. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados using verstage. cbmem console shows verstage output. Change-Id: Iba79efd1c1d4056f1a105a5e10ffc95f3e69b597 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11820 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11vboot: restructure vboot work buffer handlingAaron Durbin
For the purpose of isolating the work buffer logic the surface area of the API was slimmed down. The vb2_working_data structure is no longer exposed, and the function signatures are updated accordingly. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: If64184a79e9571ee8ef9822cfce1eda20fceee00 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11818 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11vboot: remove remnants of VBOOT_STUBAaron Durbin
For vboot1 there was an rmodule that was loaded and ran to do the firmware verification. That's no longer used so remove the last vestiges of VBOOT_STUB. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built glados. Change-Id: I6b41544874bef4d84d0f548640114285cad3474e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11817 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11intel fsp1_1: prepare for romstage vboot verification splitAaron Durbin
In order to introduce a verstage which performs vboot verification the cache-as-ram environment needs to be generalized and split into pieces that can be utilized in romstage and/or verstage. Therefore, the romstage pieces were removed from the cache-as-ram specific pieces that are generic: - Add fsp/car.h to house the declarations for functions in the cache-as-ram environment - Only have cache_as_ram_params which are isolated form the cache-as-ram environment aside from FSP_INFO_HEADER. - Hardware requirements for console initialization is done in the cache-as-ram specific files. - Provide after_raminit.S which can be included from a romstage separated from cache-as-ram as well as one that is tightly coupled to the cache-as-ram environment. - Update the fallout from the API changes in soc/intel/{braswell,common,skylake}. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302481 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11816 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11soc/intel/common: remove chipset specific callsAaron Durbin
The report_platform_info() and set_max_freq() are not being used similarly on skylake and braswell. With the addition of other SoCs I suspect a similar pattern will emerge. Instead of having weak functions to ensure things link with the hardcoded policy push these calls into their respective SoC homes. For parity, both skylake and braswell were updated to be consistent with the same calls prior to this patch. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Built braswell. Original-Change-Id: I3371d09aff0629503254296955fef28d35754a38 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/303334 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2de33632ed127cac52d7075cbad95cd6387a1b46 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11815 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11intel SOC common: Remove unused parametersLee Leahy
Eliminate unused parameters from the console initialization. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Original-Change-Id: Iacacea292d43615e9d2f8e5d3ec67e77f3f08906 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/301204 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: I3a0ea948ce106b07cb6aa872375ce588317dc437 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11814 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11Braswell: Modify CB to accomodate new FSPv83Subrata Banik
Latest FSPv83 made some change related to UPD/VPD need this patch to align those BUG=None TEST=Build and Boot Cyan System BRANCH=strago-7287.B CQ-DEPEND=CL:*226897 Original-Change-Id: I6395f3a1f4eecaef14fc4720b00252f9e6143fa3 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291394 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303137 Original-Commit-Ready: John Zhao <john.zhao@intel.com> Original-Tested-by: John Zhao <john.zhao@intel.com> Change-Id: I9920eea84b802699454850bfde489668201ffeb6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11813 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11Skylake: remove the out-dated VR config and un-needed 24mhz calibrationrobbie zhang
On Skylake, mailbox interface is used to configure VRs, dropping direct msr writing. With current fsp, svid/vr programming seems to be functional - no errors are given in the svid transactions in boot, and hw engineer verified the VRs on Kunimitsu. Additional tunnings might be needed later with power testing. 24mhz calibration is no longer needed on Skylake due to bclk archtecture change. BRANCH=none BUG=chrome-os-partner:45387 TEST=Built and boot on kunimitsu/glados, reboot, S3/resume verified. Signed-off-by: robbie zhang <robbie.zhang@intel.com> Original-Change-Id: If99b5758fcdba8604139c761a07403d4a5d2eb4c Original-Reviewed-on: https://chromium-review.googlesource.com/301470 Original-Commit-Ready: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I98acf78aac9c705614fb200f8c3313a89296fbf2 Signed-off-by: robbie zhang <robbie.zhang@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11811 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-11skylake: ajdust cache-as-ram region to 64KiBAaron Durbin
FSP is actually providing 64KiB to the bootloader. Expand current footprint to match reality. BUG=chrome-os-partner:44676 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Ibff243036eb4a6b9b9f331665a7e3efa1853bc91 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/300191 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Change-Id: Ibb876f49c3e5d8d1a3b8f6f74ed12a19663e4145 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11810 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-11intel: update common and FSP cache-as-ram parametersAaron Durbin
Instead of just passing bits, tsc_low, tsc_high, and an opaque pointer to chipset context those fields are bundled into a cache_as_ram_params struct. Additionally, a new struct fsp_car_context is created to hold the FSP information. These could be combined as the existing romstage code assumes what the chipset_context values are, but I'm leaving the concept of "common" alone for the time being. While working in that area the ABI between assembly and C code has changed to just pass a single pointer to cache_as_ram_params struct. Lastly, validate the bootloader cache-as-ram region with the Kconfig options. BUG=chrome-os-partner:44676 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Ib2a0e38477ef7c15cff1836836cfb55e5dc8a58e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/300190 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Change-Id: Ic5a0daa4e2fe5eda0c4d2a45d86baf14ff7b2c6c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11809 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11Kconfig: Hide RAM_CODE_SUPPORT.Vladimir Serbinenko
It builds only on veyron_* which already select it, no need to ask user. Change-Id: Ie508b9eade16e0f39073b23dc0da6b6d1e0a4c73 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10380 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-10-11Kconfig: Hide BOARD_ID_MANUAL.Vladimir Serbinenko
board_id() returns an integer which is platform-specific. 0 for one port is different from 0 for another port. So there is no default board_id() and hence enabling it on boards other than urara would cause build failure. Not enabling it on urara or just setting id to "(none)" as is default results in board_id() = 0 which means urara and an error message on console. Change-Id: I94618f36a75e7505984bbec345a31fe0fa9cc867 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10379 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-10-11realmode/x86: Export vbe_mode_info_valid also in text mode.Vladimir Serbinenko
Fixes linking error. Specifies that we're in text mode. Change-Id: I7ad258961039c19e1491e2b3832b003671d8a5c7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11848 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-10-11inteltool: Add function to generate SPD dump.Vladimir Serbinenko
E.g. on my MacbookAir to generate spd.bin to be used with coreboot I do: ./inteltool -S spd.bin Change-Id: If165475ed3e1f3262a8926ef619128d25b1e2896 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11847 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-10-11mba4,2: Remove USBDEBUG_HCD_INDEX.Vladimir Serbinenko
MBa doesn't have a usable usbdebug port. Change-Id: Ia8459daa5c9b9405c289954b28ecf1423b1f076c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11849 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-10-113rdparty/blobs: Update hash to latest commit in BLOBs repositoryPaul Menzel
Update to commit 832bc6f1 (Remove microcode stored in C-array format), which is the latest commit in the BLOBs repository. Building the Lenovo X60 currently fails as the microcode file cannot be found. CREATE build/mainboard/lenovo/x60/cbfs-file.wkWhPK.out (from src/mainboard/lenovo/x60/cmos.default) make: *** No rule to make target '3rdparty/blobs/cpu/intel/model_69x/microcode.bin', needed by 'build/cpu_microcode_blob.bin'. Schluss. Change-Id: I40ebceec299f46c19fd60861d872adcd91df3610 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-11libpayload: Add data structures for hashes in file attributesPatrick Georgi
Taken from cbfstool. Change-Id: I4387900517dbfb1aa51ae6f679e26d0cf5b2acf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-11lenovo/t60: Enable native intel gfx init.Vladimir Serbinenko
Tested on T60 with intel graphics. Change-Id: Id74d0a1315749052e7313135242e6b64862aa5e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5345 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11autoport: Fix ectool arguments.Vladimir Serbinenko
Change-Id: I207fa981370d72c26e6fb1f07f3cd2d1f9d44d04 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11855 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Kill lvds_num_lanesVladimir Serbinenko
Only one value would work with corresponding gma code currently (which one depends on board). Going forward, it's possible to compute which number can be used, so there is no need to keep this info around. Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11862 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Derive lvds_dual_channel from EDID timings.Vladimir Serbinenko
Based on the info by Felix Held. Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11857 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11macbookair4_2: fix FIXME's left by autoport.Vladimir Serbinenko
Change-Id: Iff1864982f2f3337c33e56976a0d4eb36f171e66 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11854 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 19:59:49 +0000