| Age | Commit message (Collapse) | Author |
|---|
|
On upcoming boards an optional pull up is applied on GPIO_10
to indicate if the board should have security features locked
down for a shipping system. Provide a weak pull down so that
all boards will indicate a logic 0 until the stronger pull up
resistor is stuffed.
BUG=chrome-os-partner:59951
BRANCH=reef
Change-Id: I6f514a69bccd05ca02480f3c30d0ad503a955b1e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17803
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
In the factory it's helpful for knowing when a system being
built is meant for release with all the security features
locked down. Provide support for exporting this type of pin
in the acpi tables.
BUG=chrome-os-partner:59951
BRANCH=reef
Change-Id: Iec70249f19fc36e5c9c3a05b1395f84a3bcda9d0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17802
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Set aclk_emmc and clk_emmc to 148.5MHz under hs400es mode, which could
improve stability like kernel.
CQ-DEPEND=CL:386527
BUG=chrome-os-partner:54377
BRANCH=none
TEST=build and boot on kevin
Change-Id: Iaa76d3ec1ab999eb317a9ab6c7e3525594b15b57
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e6eb1f56371aea51f2584a97bf817189d61090b2
Original-Change-Id: If4754d22e83a0f9a029fedca12f26ff5ae8d44e1
Original-Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/386865
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17790
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has a zeroed out SHARED_DATA
region if it exists.
Change-Id: Ib1e6fd62bcf987872890c6d155287dcedb0b1f40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8a88bf744f44d034f8606a556014e2bee37eda1
Original-Change-Id: I0b59f1f0e2f8645000f83cb3ca7f49e4da726341
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417821
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17789
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Chrome OS images have three firmware ID regions, to store version
information for the read-only and the two read-write areas. Fill them
with a suitable default and allow configuring a different scheme.
There's already an override in google/foster and google/rotor to match
the naming scheme used so far (in depthcharge).
BUG=chromium:595715
BRANCH=none
TEST=/build/$board/firmware/coreboot.rom has the expected values in the
regions.
Change-Id: I5fade5971135fa0347d6e13ec72909db83818959
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2e3be81faa8d21f92325294530714a4b18a1b3e
Original-Change-Id: I2fa2d51eacd832db6864fb67b6481b4d27889f52
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417320
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17788
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
So far, cbfstool write, when used with the -u/-d options (to "fill
upwards/downwards") left the parts of the region alone for which there
was no new data to write.
When adding -i [0..255], these parts are overwritten with the given
value.
BUG=chromium:595715
BRANCH=none
TEST=cbfstool write -u -i 0 ... does the right thing (fill the unused
space with zeroes)
Change-Id: I1b1c0eeed2862bc9fe5f66caae93b08fe21f465c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: baf378c5f2afdae9946600ef6ff07408a3668fe0
Original-Change-Id: I3752f731f8e6592b1a390ab565aa56e6b7de6765
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/417319
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/17787
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8313ba1d93922297e5061701dad47d07617d1dcd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17804
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't implement arch or driver -specific code under lib/,
Change-Id: If75980ec5efc622582e2b5e124ad0e7ee3fa39a3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17793
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We never specified what value add-int should write by default.
Change-Id: I240be4842fc374690c4a718fc4d8f0a03d63003c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Separate mma code for fsp1.1 and fsp2.0
and restructuring the code
- common code is placed in mma.c and mma.h
- mma_fsp<ver>.h and fsp<ver>/mma_core.c contains
fsp version specific code.
- whole MMA feature is guarded by CONFIG_MMA flag.
Change-Id: I12c9a1122ea7a52f050b852738fb95d03ce44800
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/17496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The compilation would fail if CFG_MEMORY_LRDIMM_CAPABLE == FALSE
and BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE.
Change-Id: I1be37e368bc4ed07e59d0f0bb967bed11143a65b
Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io>
Reviewed-on: https://review.coreboot.org/17354
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is a follow-on patch to commit 10141c30 -
(nb/intel/gm45: Use LAPIC udelay instead of custom version)
which removed the custom udelay from everywhere except SMM.
This patch removes it from SMM as well, and gets rid of the
gm45/delay.c file.
Change-Id: I7970bb5205f4aa10b38172ab5b9f8bcd6766c4e7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17330
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Iacf2e1c0b8003a3588ccbf79e17500ed12f39503
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17786
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Show an error if a symbol does not have a defined type.
This caused a problem of an undefined symbol in check_defaults, so
we just skip those symbols there as we can't verify the default pattern
without knowing the type.
Change-Id: I28711a77962e16f6fc89789400363edd0fdd0931
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since we've removed them from the tree, add a check to keep them out.
Change-Id: I2995da765fee8796a297963d54a1c34f56376efe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Overriding symbols within a .config is pretty common when doing
automated builds with various different options. The warning
text makes it sound like this is an issue, so change it to say
'notice' instead. We could get rid of it completely, but it's
not a bad thing to know that we have two copies of the same symbol
in the .config.
BUG=chrome-os-partner:54059
TEST=copy a disabled kconfig option to the end and set it to y.
See notice text instead of warning.
Change-Id: I9f575b2275233f638e42676263348c807e6515bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Commands for working with docker images:
build-coreboot-sdk - Build coreboot-sdk container
upload-coreboot-sdk - Upload coreboot-sdk to hub.docker.com
build-coreboot-jenkins-node - Build coreboot-jenkins-node container
upload-coreboot-jenkins-node - Upload coreboot-jenkins-node to hub.docker.com
clean_coreboot_containers - remove all docker coreboot containers
clean_coreboot_images - remove all docker coreboot images
Commands for using docker images
docker_build_coreboot <BUILD_CMD=target> - Build coreboot under coreboot-sdk
docker_abuild <ABUILD_ARGS='-a -B'> - Run abuild under coreboot-sdk
Change-Id: I3a75b0615747d32f593948f53eab076f303271bf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16388
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch sets PL2 override value to 15W in RAPL registers
and sets DPTF PL2 Max to 15W
BUG=none
BRANCH=reef
TEST=emerge-pyro coreboot
Change-Id: Ibadf0fa442f556d018c249b1cf88e29c4d57c97f
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/17779
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Update the junit.xml target to make it less util specific
- Add builds of coreboot internal payloads: nvramcui and coreinfo
Change-Id: I97fda909065659ab7fa4c8ee00d936d97b255bf7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17014
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Show an error if a directory is added after the command line options
to catch scripts using the old parameters.
- If an invalid parameter is specified, show the parameter.
Change-Id: Ie8948361f1c51e89a99bdb13df8c554747cd521d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17741
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
cbroot was previously specified by just adding it to the end of the
command line with no explicit identifier. This change allows it to
go anywhere in the command line and adds the -R or --root identifier.
This makes the command line more consistent. Most of the time, this
argument isn't even needed, as the automatic detection finds cbroot.
Change-Id: I1d6fd8f51765d0d8b29be8af1e8105e06dd44cc8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Indent with spaces for consistency
- Change lbroot to cbroot
- Remove incomplete list of options from usage line
- Capitalize first word of all option text
- Alphabetize options other than version and help
- Move version and help options to the end
Change-Id: Id5bd4db8d7e3705cbbb93895a46a3608cd1b09e2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17724
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This cleans up the shellcheck warnings in abuild.
Warning count:
1 Unexpected ==.
1 Use "${var:?}" to ensure this never expands to / .
1 VARIABLE appears unused. Verify it or export it.
1 Use "$@" (with quotes) to prevent whitespace problems.
2 Consider using { cmd1; cmd2; } >> file instead of individual redirects.
2 Expressions don't expand in single quotes, use double quotes for that.
3 Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
4 $/${} is unnecessary on arithmetic variables.
5 Check exit code directly with 'if mycmd;', not indirectly with $?.
5 Use cd ... || exit in case cd fails.
11 Declare and assign separately to avoid masking return values.
13 Use $(..) instead of legacy `..`.
20 Don't use variables in the printf format string.
104 Double quote to prevent globbing.
Change-Id: I9c77e122435ba87ce3a4aee76b5022f7265f9ef2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
soc_binding.h includes FSP headers which define NULL macro. Because of
this, including stddef.h after soc_binding.h results in NULL being
re-defined. Thus, include stddef.h in soc_binding.h to avoid having
users include stddef.h along with soc_binding.h.
Change-Id: I600083c5d8f672518beaa1119f14f67728a433aa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17773
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of hardcoding pci_mmio_size in the raminit code,
this makes it a parameter in the devicetree.
A safe minimum of 768M is also defined since using anything
less causes problems (if 4G of ram is used).
Change-Id: If004c861464162d5dbbc61836a3a205d1619dfd5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16856
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Except fo nehalem, K8, f10 and f15 (non-AGESA) romstage ramstack
is placed in CBMEM and ramstage loader takes care of tiny backup.
Change-Id: I8477944f48ed2493d0a5e436a4088eb9fc3d59c5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17358
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I48a20e34f11adc7c61d0ce6b3c005dbd712fbcac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/10360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't use scratchpad registers when we have romstage_handoff
to pass S3 resume flag. Also fixes console log from reporting
early in ramstage "Normal boot" while on S3 resume path.
Change-Id: I2f1f05ef4fc640face3d9dc92d12cfe4ba852566
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17676
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I2085fc3a17d32cfbdab9ec0b7afbc01031e75b47
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17785
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't use scratchpad registers when we have romstage_handoff
to pass S3 resume flag. Scratchpad register was read too
late in ramstage so acpi_is_wakeup_s3() did not evaluate
correctly.
This fixes low memory corruption at 0x1000-0x102c and the lack
of coreboot tables (util/cbmem not working) after S3 resume.
This also fixes console log from reporting early in ramstage
"Normal boot" while on "S3 resume" path.
Change-Id: I2922a15a90d2f8272c3482579bdd96f8f33e9705
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17675
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't use scratchpad registers when we have romstage_handoff
to pass S3 resume flag. Also fixes console log from reporting
early in ramstage "Normal boot" while on S3 resume path.
Change-Id: I4e2eabc59ff87b7ed40cfc9885bbe0256fe4a695
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17674
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapt implementation from skylake to prepare for removal of
HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE.
With this change, CBMEM region is set early-on as WRBACK
with MTRRs and romstage ram stack is moved to CBMEM.
Change-Id: Idee5072fd499aa3815b0d78f54308c273e756fd1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15791
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Force modest 4 MiB alignment to help with MTRR assignment.
Change-Id: I49a7d1288bc079da1b8bd52150ddcfcfe2e51179
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17780
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The value for _size was not evaluated correctly if ramstage
is relocated, make the calculation runtime.
While touching it, move symbol declarations to header file.
Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Model 6ex are Core Solo and Core Duo CPUs (yonah) that never existed
with a LGA775 socket.
This reduces the size of the microcode from 180k to 168k.
Change-Id: Ic5b3d0e7c8009dab2dca477010c328274a818fed
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17120
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch adds an API to find file by name from
any specific region of fmap.
Change-Id: Iabe785a6434937be6a57c7009882a0d68f6c8ad4
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/17664
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make sure relocation code reaches DRAM before issuing any
SMIs. Snooping and cache coherency may have undefined
behaviour as CPUs do not have uniform MTRR layout yet.
Change-Id: I47a7d684e05ff8c1c2f1f6a5bf8c0bbc561d9eac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17712
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Create postcar_frame object without placing stack in CBMEM.
This way same cache_as_ram.inc code can be used unmodified.
Change-Id: Ic5ed404ce268ee881e9893dd434534231aa2bc88
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17700
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapt implementation from skylake.
Change-Id: Ica3134a2261d3e84c714264cf75557322f9ef5db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17673
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fill in the NHLT ACPI OEM header fields to differentiate
different audio solutions on a per board basis. This handles
boards that share a firmware that are differentiated by
the SKU id and boards that have their own firmware. For the
latter, the Oem Table ID uses the VARIANT_DIR to differentiate.
"reef" is always used for Oem ID which is treated as more of
family in this case.
iasl -d shows the following on reef:
[00Ah 0010 6] Oem ID : "reef"
[010h 0016 8] Oem Table ID : "reef"
[018h 0024 4] Oem Revision : 00000008
BUG=chrome-os-partner:60494
BRANCH=reef
Change-Id: I5daa6f0306bc05e812a8737ce61ee37177a36b76
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17772
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There are 2 gpios on reef-like boards that can be composed
into a SKU. Add support for identifying the SKU value using
the base 3 gpio logic. Also export the SKU information to the
SMBIOS type 1 table.
BUG=chrome-os-partner:59887,chrome-os-partner:60494
BRANCH=reef
Change-Id: I8bb94207b0b7833d758054a817b655e248f1b239
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17771
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update abuild to allow for building saved miniconfig files.
If one or more config files exist for a platform under
coreboot/configs, they will be built instead of the automatically
generated default config.
The config filename needs to start with "config.$VENDOR_$BOARD" to be
picked up by the abuild script.
- Update to version 0.10.0
- Add -d parameter to specify the saved config file directory
- Break 2nd half of create_config function into update_config
to set the payload for saved config files.
- Unset new payload Kconfig options that could be set in a saved
config file.
- Update a bunch of MAINBOARD variable names to BUILD_NAME since
the build name isn't necessarily the same as the mainboard name.
- Split build_target into two functions - build_target and
build_config because one mainboard can now build multiple
configurations.
- Update remove target and call it directly from build_target()
instead of from build_targets()
Change-Id: I1a276d3e507b178f7dcd9dc125fa9c59f1ab47bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17590
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For some reason the \n in the defconfig save error was not escaped.
Change-Id: I6a76b258f461a194fe17aae2b4fa04326b46d8d6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17742
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Change-Id: Ifc5ec645dd27663c1b1fde9ff16d48534606a554
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17600
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Test some config options that don't typically get tested.
Change-Id: Ie05c99411c8ce6462a6f5502b086ee2b72a4324b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17591
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
There is ongoing work to link SPI bus and devices in to the devicetree
so this can be generated, but for now put in the raw ASL code to
describe this controller so it can be used by the factory.
BUG=chrome-os-partner:55538
TEST=successfully load fpc1020 kernel module on eve board
Change-Id: I6641664e60fcf2c0bad4b3506c77513b26d7be2e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17776
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Previously privilege drop was happening "too early" and that caused some
PMC IPC programming (performed in FSP) to fail because sideband was
already locked out. This change set moves privilege drop to later stage,
after last FSP notify call.
BRANCH=reef
BUG=chrome-os-partner:60657
TEST=iotools rdmsr X 0x121, make sure they can't be read.
Also dmesg|grep -i IPC to make sure there are no errors related
Change-Id: Ia3a774aee5fbf92805a5c69093bfbd3d7682c3a7
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17769
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are circumstances where the APs need to run a piece of
code later in the boot flow. The current MP init just parks
the APs after MP init is completed so there's not an opportunity
to target running a piece of code on all the APs at a later time.
Therefore, provide an option, PARALLEL_MP_AP_WORK, that allows
the APs to perform callbacks.
BUG=chrome-os-partner:60657
BRANCH=reef
Change-Id: I849ecfdd6641dd9424943e246317cd1996ef1ba6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17745
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
The bootstate machine allows one to schedule work at the
boundaries of each state. However, there are no priorities by
design. As such if there are things that need to be performed
that are interdependent between callbacks there's no way to
do that aside from explicitly putting the call in one of the
callbacks.
This situation arises around BS_OS_RESUME, BS_PAYLOAD_LOAD,
and BS_PAYLOAD_BOOT as those are the states where coreboot is
about to exit. As such, provide an architecture specific hook
at these key places so that one is guaranteed any work done
in arch_bootstate_coreboot_exit() is after all callbacks in
the state machine.
BUG=chrome-os-partner:60657
BRANCH=reef
Change-Id: Icb4afb341ab15af0670501b9d21799e564fb32c6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17767
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This patch sets PL2 override value to 15W in RAPL registers.
BUG=chrome-os-partner:60535
TEST=Built, booted on reef and verified PL2 value.
Change-Id: I4ff6a5e7b8686d97134846ee80cdac10916d58ef
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/17730
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch sets the package power limit (PL2) value
in RAPL register.
BUG=chrome-os-partner:60535
TEST=Built, booted on reef and verified PL2 value.
Change-Id: I83fe854cf3e9fc92ab87f84b86e64ebb6085065f
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/17699
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The MRC cache uses an incoherent mechanism for updating the
cache contents in that it assumes memory mapped boot device
access for checking against latest data for update. However,
it uses another driver for updating the underlying storage
area.
In order to aid in moving the MRC cache over to using
region_devices for updates provide an implementation of
a region_device which performs reads and writes to different
region_devices so that different drivers can be used
transparently.
BUG=chrome-os-partner:56151
Change-Id: I30e858245c30cbccd6313aff5ebecd3fd98d7302
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17716
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The MRC cache wants to be able to access the SPI flash boot device.
Allow an easy way to provide that so that there isn't duplicate
spi_flash objects representing the same device.
BUG=chrome-os-partner:56151
Change-Id: Iba92e8bb8a6060cdd327b10f5f8ec23ac61101e7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The region file library is added to provide the underpinnings for
other libraries that support appending updates when the data changes.
The most recent written data is deemed the latest data associated
with that "file". A good example is the MRC cache which in a follow-up
patch utilizes this library.
BUG=chrome-os-partner:56151
Change-Id: Ic3caf1edbb6f11dbbe27181a87b7b19d1224fffa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17713
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
compute_ip_checksum() doesn't manipulate the data it is passed.
Therefore, mark it as const.
BUG=chrome-os-partner:56151
Change-Id: I54cff9695a886bacd6314aa441d96aaa7a991101
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17714
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Simplify set_power_led() by consolidating switch and setting values
as needed inline based on LED state. Remove unnecesary function
param, includes for Tidus.
Change-Id: I28e6fac5f8d7e2ff419002db714ce88697895faf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17744
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This driver applies to 10ec:8168
Previously, this driver resetted the nic and set a hardcoded
MAC address. Now the driver reads a default MAC address
from CBFS in the form of a string:
echo -n "xx:xx:xx:xx:xx:xx" > macaddress
and store the macaddress file in CBFS with the same name.
TESTED on GA-G41M-ES2L and GA-945GCM-S2L:
MAC address was detected
Change-Id: If1af91120fa3efca3f1406334a83ed1e59fbdaf9
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/17672
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ie8ca342a32323be4c26c236a5209052ec724317f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17353
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This makes CHIPSEC happy. We don't enable PAVP, but it shouldn't hurt
to lock it nevertheless.
Change-Id: I9428f0b6e8868832eb79f7aea24cbc7961c2aa8f
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Reviewed-on: https://review.coreboot.org/17352
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
CHIPSEC found that the TCO_Lock was not set.
This is used to prevent changing the TCO_EN bit.
Change-Id: I42364dbef2511e656662566cf94591e76c6847ed
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Reviewed-on: https://review.coreboot.org/17351
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The EM4/EM5 registers in the mini-HD audio device must be set based
on the GPU cdclk value in order for HDMI audio to function properly.
Add variables to save the correct values when initializing the GPU,
and accessor functions to retrieve them in order to set the registers
when initializing the mini-HD audio device.
Change-Id: Icce7d5981f0b2ccb09d3861b28b843a260c8aeba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17718
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Simplify set_power_led() by consolidating switch and setting values
as needed inline based on LED state.
Fix non-off LED polarity for Tricky using correct value from Chromium source
TEST: power on Tricky, observe LED lit / solid
Change-Id: I8bc7c4ae3f83d3f37b76fd5c90a4faed7057ebee
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17719
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Prototype changed here:
e258b9a intel sandy/ivy: Improve DIMM replacement detection
Change-Id: Id79238db2e497b9163f3bd1b1d5d4bc11fe4da9e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17711
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add helper function to find a device by path type
in the device tree.
Change-Id: I8846f63bd2488788ea3c7ab5154e7cf431a252bc
Credits-to: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Dhaval V Sharma <dhaval.v.sharma@intel.com>
Reviewed-on: https://review.coreboot.org/17731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
1. Define controller for fast SPI.
2. Separate out functions that are specific to SPI and flash controller
in different files.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully for reef.
Change-Id: If07db9d27bbf4f4eb6024175cb7753c6cf4fb793
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17562
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
1. Add new structure spi_ctrlr_buses that allows platform to define a
mapping from SPI controller to buses managed by the controller.
2. Provide weak implementations of spi_init and spi_setup_slave that
will be used by platforms using the new interface.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia6f47941b786299f4d823895898ffb1b36e02f73
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17561
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Skylake uses a special SPI Flash controller and does not require
spi_claim_bus and spi_release_bus functionality. This was a leftover
call from earlier cleanup, so remove it.
Change-Id: Iea260813cf72b94b7e7c661dbe494a74351dc357
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17729
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BootLoaderTolumSize FSP-M UPD is already initialized with cbmem_overhead_size()
inside driver/fsp2_0/memory_init.c, hence remove the duplicate assignment.
Change-Id: I0b1d9769cd2a863bf0547ce5f44928cacc5a63b6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17721
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the new time stamps *finalize chips* to track, when the method
`dev_finalize_chips()` is called, so that the real time of
`write_tables()` is known.
Change-Id: I65ca0ec4c07c2eaa14982989cb206d23d8a2293f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17725
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This will be used by new Roda boards. Four UARTs and PS/2 keyboard and
mouse are exposed to ACPI. Since our boards only use the environment
controller part, most of the usual pnp interfaces are untested.
Change-Id: Ifeb0327ad115759411716f82585ace5ce55b8464
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17287
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
ITE super-i/o chips need a fourth byte and have a special register
to exit config mode.
Change-Id: Ic40873649d567b87d3a937f2bf068649e67715de
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17286
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I8cbfe49516e685c1b3e150b23f9fcac513f1f3dc
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17285
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ibf0bd772bfdb3bbf6482a0ec9ff90a5c0a8945d2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17765
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Device is of type CPU_CLUSTER, while pci_dev_set_resources()
expects PCI_DOMAIN.
Change-Id: Ib1add47d71071abb6e9c28e3a85dd0b671741b71
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17697
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Resource is actually stored even before read_resources, but
that's where we currently log this resource.
For Intel, use PCI config register offset as the resource
index, while AMD side uses MSR address.
Change-Id: I6eeef1883c5d1ee5bbcebd1731c0e356af3fd781
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17696
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17695
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Also remove separate MMCONF_SUPPORT_DEFAULT flag.
Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17694
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Doing PCI config operations via MMIO window by default is a
requirement, if supported by the platform. This means chipset
or CPU code must enable MMCONF operations early in bootblock
already, or before platform-specific romstage entry.
Platforms are allowed to have NO_MMCONF_SUPPORT only in the
case it is actually not implemented in the silicon.
Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17693
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Drastically reduced RW_MRC_CACHE size to hold one update. Now
that this area isn't changing after every S5 entry there's no
need make it so large.
- ELOG area reduced by 4KiB for subsequent area alignment. In practice
this doesn't matter because the elog library only uses 4KiB bytes.
16KiB->12KiB is a nop.
- Moved RW_NVRAM for subsequent alignment.
- Most importantly, RW_SECTION_(A|B) are aligned to 64KiB boundaries
and sized to 64KiB multiples. This ensures updates don't need a
read-modify-write that could force a system into recovery if
an inopportune power event occurred.
BUG=chrome-os-partner:60492
BRANCH=reef
Change-Id: I2a2e2797897c934db1a3f9627c6c13a9b2aad540
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17727
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It turned out that newer GNAT versions can build our current (5.3.0)
GNAT without bootstrapping. So adapt the version enforcement.
Change-Id: Ie7189e8bcadeee56cf5c2172e8c0ae7cd534685a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
With some newer versions of GCC (experienced with GCC 6.2.1 on Arch-
Linux) the first stage of a boostrapping fails due to a mismatching
function prototype. Also add a missing `static` to the signature.
Change-Id: Ia927036ccd725550f1191890515578bc80c74f80
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update the memory ramid.
Move to one CA training pattern.
BUG=chrome-os-partner:59454
BRANCH=firmware-gru-8785.B
TEST=Build firmware passed
Change-Id: Ic05cbc1700a13e372f63d5202459add0e984f9d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1030a78af3d489d13508f17a79df1e65bd5afa3b
Original-Change-Id: Ibe8acb5b698cec1adcdddbb13d35a5e20a5b8c0d
Original-Reviewed-on: https://chromium-review.googlesource.com/414664
Original-Commit-Ready: Shasha Zhao <Sarah_Zhao@asus.com>
Original-Tested-by: Shasha Zhao <Sarah_Zhao@asus.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Change-Id: I0ae46e496cd18492a2b6c7167081798c2f2479b1
Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/411645
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17679
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add bob in coreboot and update as necessary.
1. Add bob HWID
2. Add supported memory source
BUG=chrome-os-partner:59454
BRANCH=firmware-gru-8785.B
TEST=Build firmware passed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: Iad03a293bdbbb89450f0fea0822e34a4be7064bf
Original-Commit-Id: bff788c71a43403bff2c23b38e69cc27fb869559
Original-Change-Id: I0dcf47eb911337b176f73759a2c70a9dbf4dc68b
Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/411083
Original-Reviewed-by: Philip Chen <philipchen@chromium.org>
Original-(cherry picked from commit c5925dfcf59ac755a26182744b2bde59e41a37cf)
Original-Reviewed-on: https://chromium-review.googlesource.com/413744
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17678
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We may support different sdram sizes on one board in future, so
we need to calculate sdram sizes from sdram drvier.
BRANCH=None
BUG=None
TEST=boot kevin
Change-Id: I43e8f164ecdb768c051464b4dbc7d890df8055d0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c4d8b3cb647b2f9cebc416c298817c16d49330e
Original-Change-Id: I95d5ef34de9d79ebca3600dc7a4b9e14449606ff
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/411600
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17629
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Gru only uses USB 2.0 in firmware to avoid all the madness associated
with Type-C port orientation and USB 3.0 tuning. We do this by isolating
the SuperSpeed lines in the Type-C PHY so it looks like they aren't
connected to the device.
Unfortunately, some devices seem to already get "locked" into SuperSpeed
mode as soon as they detect Rx terminations once, and can never snap out
again on their own. Since the terminations are already connected during
power-on reset we cannot disable them fast enough to prevent this, and
the only solution we found to date is to power-cycle the whole USB port.
Now, Gru's USB port power is controlled by the EC, and unfortunately we
have no direct host command to control it. We do however have a command
to force a certain USB PD "role", and forcing our host into "sink" mode
makes it stop sourcing power to the port. So for lack of a saner
solution we'll use this to work around our problem.
BRANCH=gru
BUG=chrome-os-partner:59346
TEST=Booted Kevin in recovery mode, confirmed that my "problem stick"
gets detected immediately (whereas previously I had to unplug/replug
it). Booted Kevin to OS in both developer and normal mode and confirmed
that USB still seems to work.
Change-Id: Ib3cceba9baa170b13f01bd5c01bd413be5b441ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd695eda33299e50362f1096c46f2f5260c49036
Original-Change-Id: I2db3d6d3710d18a8b8030e94eb1ac2e931f22638
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/413031
Reviewed-on: https://review.coreboot.org/17628
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Normally firmware should have no business messing with the USB PD role
(source/sink/whatever) in the EC. But, as so often happens, ugly issues
crop up that require weird work-arounds, and before you know it you need
to do this for some reason that only makes sense in context. I do now,
so add this function to send the necessary host command in the simplest
possible fashion.
BRANCH=gru
BUG=chrome-os-partner:59346
TEST=Used it in a follow-up patch.
Change-Id: I07d40feafd6a8387a633d6384efb205baf578d76
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8b71767caccff9b77d458182ce8066f7abf6321c
Original-Change-Id: Ie8d0be98f6b703f4db062fe2f728cd2588347202
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/413030
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://review.coreboot.org/17627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id404bdab1f2361f1e7d20f7ee72111971863dddf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17736
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17735
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ifeef04b68760522ce7f230a51f5df354e6da6607
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17734
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Resource allocator and 64-bit PCI BARs will need it and
PCI use is not really restricted to x86.
Change-Id: Ie97f0f73380118f43ec6271aed5617d62a4f5532
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17733
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iefbc17dcfcf312338d94b2c2945c7fac3b23bff6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17732
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
MMCONF operations are already the default so these
would never be used.
Change-Id: I671f3d2847742e400bc4ecfccc088e3b79d43070
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7fa65197b8165b9b0b74937f9ba455c48308da37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17530
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17690
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access
being non-atomic and/or need to access 4kiB of PCI config space.
All these platforms now have MMCONF_SUPPORT_DEFAULT.
I liked the style of code in pci_mmio_cfg.h more, and used those to
replace the ones in io.h.
Change-Id: Ib5e6a451866c95d1edb9060c7f94070830b90e92
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17689
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The code originates from times before __SIMPLE_DEVICE__ was
introduced. To keep behaviour unchanged, use explicit PCI
IO operations here.
Change-Id: I44851633115f9aee4c308fd3711571a4b14c5f2f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17720
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access
being non-atomic and/or need to access 4kiB of PCI config space.
All these platforms now have MMCONF_SUPPORT_DEFAULT.
Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17545
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access
being non-atomic and/or need to access 4kiB of PCI config space.
All these platforms now have MMCONF_SUPPORT_DEFAULT.
Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17529
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I9147eca0b536b6267d58f6e8baa37b6950b35160
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/17710
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
