summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-21soc/intel/common: Check CSE Lite RW statusSridahr Siricilla
The patch moves CSE Lite RW status check out of CSE RW update logic as the RW sanity check has to be done irrespective of CSE RW update logic is enabled or not. If coreboot detects CSE Lite RW status is not good, the coreboot triggers recovery. TEST=Verified boot on Brya Signed-off-by: Sridahr Siricilla <sridhar.siricilla@intel.com> Change-Id: I582b6cf24f8894c80ab461ca21f7c6e8caa738bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/55619 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21soc/amd/cezanne/fsp_m_params: set HD Audio enable UPD from devicetreeFelix Held
Pass the info if the non-graphics HD audio controller device is enabled or disabled in the board's devicetree via a UPD to the FSP so that it knows if it should enable or disable the corresponding device. TEST=When adding "device ref hda on end" to the devicetree of amd/majolica the non-graphics HD Audio controller shows up in lspci and when that line isn't added the PCIe device doesn't show up. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9f5e164d308906bfc788e5c2674c13c7b2ebf471 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-21vc/amd/fsp/cezanne/FspmUpd: add hda_enable UPDFelix Held
This UPD to enable/disable the non-graphics HD audio controller was added in FSP build version 1.0.3.1, so sync the header file in coreboot with this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I15eee45dc5d12a420eb688eaa5879c92b6d1b2c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-21soc/amd/cezanne/fsp_m_params: set SATA enable UPD from devicetree infoFelix Held
Currently the FSP only has one switch to disable both AHCI controllers. If at least one of the two AHCI controller devices is enabled in the board's devicetree, set the SATA enable UPD to 1 and otherwise set it to 0. Setting the UPD value to 0 when both AHCI controllers are disabled saves around 60ms in boot time. BUG=b:191385289 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I84e7c8bf2ab08c8254271ddfefd2e4e7d8c2e87b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55669 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21soc/intel/apollolake: Use devfn_disable() functionSubrata Banik
Use devfn_disable() for disabling a PCI device rather than using `dev->enabled = 0`. Also, use is_devfn_enabled() to get the device current state prior updating the FSP-S UPD for XDCI. TEST=FSP-S disabled XDCI when `xdci_can_enable` returns 0 and XDCI is disabled at PCI enumeration `PCI: 00:15.1: enabled 0`. Change-Id: I449beae59d2f578c027d8110c03fa79f516c3fe9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21soc/intel/common: Add InSMM.STS supportAngel Pons
Tested on HP 280 G2, SMMSTORE v1 and v2 still work. Other tests: - If one does not set BIOS_CONTROL bit WPD, SMMSTORE breaks. - If one does not write the magic MSR `or 1`, SMMSTORE breaks. Change-Id: Ia90c0e3f8ccf895bfb6d46ffe26750393dab95fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-21security/intel: Add option to enable SMM flash access onlyAngel Pons
On platforms where the boot media can be updated externally, e.g. using a BMC, add the possibility to enable writes in SMM only. This allows to protect the BIOS region even without the use of vboot, but keeps SMMSTORE working for use in payloads. Note that this breaks flashconsole, since the flash becomes read-only. Tested on Asrock B85M Pro4 and HP 280 G2, SMM BIOS write protection works as expected, and SMMSTORE can still be used. Change-Id: I157db885b5f1d0f74009ede6fb2342b20d9429fa Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-21ec/google/wilco: Fix comment about enclosure typeKyösti Mälkki
SYSTEM_TYPE_CONVERTIBLE is not valid SMBIOS enclosure type, but selecting it implies SMBIOS_ENCLOSURE_CONVERTIBLE. Change-Id: Ib658af7b80586428b22f08a738964637e1fbd17a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21security/intel/cbnt: Add loggingArthur Heymans
This decodes and logs the CBnT status and error registers. Change-Id: I8b57132bedbd944b9861ab0e2e0d14723cb61635 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54093 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21security/intel/txt: Split off microcode error types string printingArthur Heymans
The purpose is to reuse the types string in CBnT error printing. Change-Id: I435de402fef6d4702c9c7250c8bd31243a04a46e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54092 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21security/intel/txt: Always build logging.cArthur Heymans
Always building makes sure this code gets buildtested. Calling this code already was guarded by "if CONFIG(INTEL_TXT_LOGGING)". Also build this in all stages as future code will use this in bootblock. Change-Id: I654adf16b47513e3279335c8a8ad48b9371d438e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54295 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21mb/google/dedede/var/storo: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:180875582 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ica2f2856000c8dcbf4d23b7b4a3c479dc7d4862b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-06-21vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2207_01Ronak Kanabar
The headers added are generated as per FSP v2207_01. Previous FSP version was v2162_00. Changes Include: - Add IbeccProtectedRangeEnable, IbeccProtectedRangeBase and IbeccProtectedRangeMask in FspmUpd.h - Add UsbTcPortEn in FspsUpd.h - Adjust Reserved UPD Offset in FspmUpd.h - Few UPDs description update in FspmUpd.h and FspsUpd.h BUG=b:189731004 BRANCH=None TEST=Build and boot brya Change-Id: Ice44dfbd41e8eca4f171b76e7a3dcdf133a516fd Cq-Depend: chrome-internal:3876956, chrome-internal:3909162, chrome-internal:3909163 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55094 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21mb/google/guybrush: Add devfn macros for devices on GPP bridgeKarthikeyan Ramasubramanian
Add devfn macros for some peripheral devices that are attached to PCIE GPP Bridge. BUG=None TEST=Build and boot to OS in Guybrush. Change-Id: I7c5433dff2329f13c282908e2b848405819347ff Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-21soc/intel/alderlake: Add GFx Device ID 0x46b3Meera Ravindranath
List of changes: 1. Add new GFx ID 0x46B3 into device/pci_ids.h 2. Update new GFx ID into common graphics.c 3. Add new GFx ID description into report_platform.c TEST=Build and boot brya Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I4343c7343875eb40c2955f6f4dd98d6446852dc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-06-21security/intel/cbnt/Makefile.inc: Fix building cbnt-provArthur Heymans
This makes it possible to build cbnt-prov with Jenkins. Change-Id: I658723a4e10bff45176d7c1ea7a410edbb182dc6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21soc/intel/elkhartlake: Expose In-Band ECC config to mainboardWerner Zeh
Elkhart Lake provides a feature called "In-Band ECC" which uses a piece of system DRAM to store the ECC information in. There are a few parameters in FSP-M to set this feature up as needed. This patch adds code to expose these parameters to the devicetree so that they can be configured on mainboard level as needed. Change-Id: I7a4953d7b35277de01daff04211450e3d1bd8103 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55668 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21drivers/intel/mipi_camera: Change type for gpio_num to uint16_tVarshit B Pandya
gpio_num is used to indicate the GPIO which is taken from gpio_soc_defs.h file. Support for dynamic generation of ASL file for Camera was added for JSL when there were less than 256 GPIOs. ADL now has more GPIOs and therefore uint8_t is not enough any more Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I0a5fdb612c8cf689d356af8591b9ad101360c25d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55538 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21mb/google/dedede/var/blipper: Configure Acoustic noise mitigation UPDsZanxi Chen
Enable Acoustic noise mitigation for blipper and set slew rate to 1/8 which is calibrated value for the board. BUG=b:187760191 BRANCH=dedede TEST=build firmware to UPD and Acoustic noise test Change-Id: I187702c23712416eaaaaf1e210dcfc6b2c560041 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-21mb/purism/librem_mini/hda_verb.c: Fix subsystem, jack detectMatt DeVillier
- set subsystem/subvendor ID to Realtek default, as the one dumped from the vendor UEFI firmware provides no advantages - Add a codec reset before setting the subvendor ID using the Azalia macro for consistency with all other Realtek HDA codecs - disable jack detect for the external mic on the 3.5mm jack, since it's not currently working, so that the external microphone can be manually selected Change-Id: Ib0f99e5088973a721c0a295899012c9aea5009cf Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/purism/librem_14/hda_verb.c: Fix subsystem, verb count, jack detectMatt DeVillier
- set subsystem/subvendor ID to Realtek default, as the one dumped from the vendor UEFI firmware provides no advantages - fix the number of verb entries, which excluded the 4 following the pin configs - issue the reset *before* setting the subvendor, and use the Azalia macro - disable jack detect for the 3.5mm jack, both line out and mic, since it's not currently working, so that the outputs can be manually selected Change-Id: Icd961c3c5aec23cf61d6a9ad65c603c6dc04697a Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/purism/librem_mini: Enable acoustic noise mitigationMatt DeVillier
Enable FastPkgCRampDisable for all domains, set SlowSlewRate to fast/16 for all domains. This aligns the settings with the Librem 14. Test: boot Librem Mini v2, observe high frequency acoustic noise reduced. Change-Id: I10bc2a3e6b631b8c0b430e204f376aa9a81ac683 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21ec/purism/librem/ec.asl: Disable notification for touchpad enable/disableMatt DeVillier
Somehow, enabling the notification to the OS driver breaks the functionality it was meant to enable. Until this can be resolved, disable the driver notification, so that the key functions as intended. Test: build/boot librem_bdw and librem_skl boards, verify trackpad enable toggle via Fn+F1 works properly. Change-Id: Ic7bdb3154a87c4202b5ee1fd333281ef78db1104 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55657 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21mb/purism/librem_14: set SA slew rate to fast/16Matt DeVillier
Decrease SA slew rate to match other domains and reduce high-frequency noise slightly. Change-Id: I02cd93481f6bfba6249cb338a0e2f47d471a438e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21mb/guybrush: Probe FW_CONFIG for FP_PRESENTRob Barnes
Only enable fingerprint device when FP=FP_PRESENT in FW_CONFIG. BUG=b:186685292 TEST=Boot guybrush, no "EC failed to respond in time" error Change-Id: Ifaea9e23e6cdfdae024464ff36c1520b8ad05e50 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-21security/tpm/tspi/crtm.c: Fix early initArthur Heymans
If the early crtm is not initialised there is nothing to write to PCR in the early tpm init. Change-Id: I9fa05f04588321163afc817de29c03bd426fc1f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-06-21include/pci_def.h: Add some PCI Power Management CSR bitsTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I84c8470764a4e6e09220044966111ffe72078099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55674 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21soc/intel/common/block/cse: Move enum csme_failure_reasonTim Wawrzynczak
CSE error codes may be applicable to move than just CSE Lite SKU errors, therefore move this enum to the intelblocks/cse.h file so that it can be used in other CSE-related code. While copying, remove `LITE_SKU` from a few of the enum values that are not necessarily CSE Lite SKU-specific. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0351587c67ce12f781c536998ca18a6a804d080a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55672 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21southbridge/amd: Create ACPI MCFG MMCONFIGAngel Pons
These southbridges are paired with MMCONF-enabled northbridges. Change-Id: I0416de6425bb57471856731ad12ce8194ac98be2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-20util/ifdtool: Use ICH Strap Length (ISL) to identify APL chipsetSubrata Banik
Use offset FLMAP1 bit 24:31, called ISL (ICH Strap Lenth) to uniquely identify the chipsets without any additional logic. +---------+-----------+ | Chipset | PSL Value | +---------+-----------+ | APL | 0x13 | +---------+-----------+ BUG=b:153888802 TEST=Able to dump FD contains correctly without specifying platform quirks on APL (IFDv1) Platform. > ifdtool -d coreboot.rom PCH Revision: Apollo Lake: N3xxx, J3xxx Change-Id: I02bcc6b1ca61c4ee59582f1b310ed0fba0ef1d9a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-20util/ifdtool: Use -p platform name to detect IFDv2 platform and chipsetSubrata Banik
ifdtool uses `chipset` information to determine how certain straps are decoded. This has been used for IFDv1 platforms as well as IFDv2 platforms (CHIPSET_500_600_SERIES_TIGER_ALDER_POINT). IFDv2 platforms are all expected to pass in `-p` argument to identify the platform. This platform information can be used to identify the appropriate chipset information. For IFDv1 since `-p` argument is not provided, ifdtool needs to use certain fields in the descriptor (e.g. strap length) for unique identification of IFDv1 chipset. This change updates `check_ifd_version()` function to: 1. Determine if IFD version is v1 or v2 based on `-p` argument. If `-p` is not provided, it assumes that the platform is using IFDv1. 2. Based on IFD version, it calls either `ifd2_platform_to_chipset()` or `ifd1_guess_chipset()` to determine chipset information. This fixes the issue reported with CB:44815, where ifdtool is unable to identify Alder Lake chipsets. BUG=b:153888802 TEST=Able to dump FD contains correctly with platform quirks on Brya Platform. > ifdtool -d coreboot.rom -p adl PCH Revision: 500 series Tiger Point/ 600 series Alder Point Change-Id: I25f69ce775454409974056d8326c02e29038ec8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54305 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-19mb/google/dedede: Configure CBI EEPROM WPAseda Aboagye
On dedede boards without Cr50, the CrOS Board Info (CBI) EEPROM write protect signal is decoupled from the hardware write protect signal. Instead, we'd like for it to mirror the software write protect status. This commit simply checks the software write protect status of the SPI flash and sets the CBI EEPROM write protect if it's enabled. To prevent changing the WP signal at run-time, the GPIO configuration is also locked down after the level has been set. If HW WP is deasserted, the CBI EEPROM WP will be deasserted as well. BUG=b:191189275,b:184592299 BRANCH=None TEST=Build and flash lalala, disable SW WP by running `flashrom -p host --wp-disable` from a root shell and verify that the GPIO is asserted after a reboot. Export the gpio via sysfs and verify that attempting to change the value of the GPIO is futile. Enable SW WP via `flashrom -p host --wp-enable` and reboot the DUT. Again, export the GPIO via sysfs and verify that attempts to change the GPIO value are futile. localhost ~ # iotools mem_read32 0xfd6e08d0 0x44000200 localhost ~ # cd /sys/class/gpio/ localhost /sys/class/gpio # echo 217 > export localhost /sys/class/gpio # cd gpio217/ localhost /sys/class/gpio/gpio217 # echo out > direction localhost /sys/class/gpio/gpio217 # cat value 0 localhost /sys/class/gpio/gpio217 # echo 1 > value localhost /sys/class/gpio/gpio217 # cat value 1 localhost /sys/class/gpio/gpio217 # iotools mem_read32 0xfd6e08d0 0x44000200 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Ic103037921ec7d2f96f86178675c11a3a1357d1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-19soc/intel/common/block/smm: Add `mainboard_smi_finalize`Aseda Aboagye
This commit adds a method called `mainboard_smi_finalize` which provides a mechanism for a mainboard to execute some code as part of the finalize method in the SMM stage before SoC does its finalization. BUG=b:191189275 BRANCH=None TEST=Implement `mainboard_smi_finalize` on lalala and verify that the code executes in SMM. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: If1ee63431e3c2a5831a4656c3a361229acff3f42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-19soc/intel/jasperlake: Add offsets for pad lockingAseda Aboagye
This commit simply adds the offset for the PADCFGLOCK register for the Intel Jasper Lake platform. This enables pads to be locked. BUG=b:191189275 BRANCH=None TEST=Enable pad locking on lalala by calling `gpio_lock_pad` and verify that the pad configuration is locked and cannot be manipulated from the OS. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Iccfe536b4a881f081f22bcc258a375caad3ffcb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55648 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-19soc/intel/common/block/gpio: Add `gpio_lock_pad()`Aseda Aboagye
This commit adds a method for locking a GPIO pad configuration and its TX state. When the configuration is locked, the following registers become Read-Only and software writes to these registers have no effect. Pad Configuration registers GPI_NMI_EN GPI_SMI_EN GPI_GPE_EN Note that this is only effective if the pad is owned by the host (set in the PAD_OWN register). Intel platforms that wish to leverage this function need to define the PADCFGLOCK offset for their platform. BUG=b:191189275 BRANCH=None TEST=With some other code, call gpio_lock_pad() against a pad and verify that the pad configuration is locked and the state of the pad cannot be changed from the OS. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Id3c0da2f6942099c0289ca1e33a33c176f49d380 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-18soc/intel/alderlake: Add TBT PCIe root ports enablementBernardo Perez Priego
Ports are enabled according to devicetree. BUG=none TEST=Boot device, TBT should be functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I57e8eb13484014c17d24ad564643f0d03d11bc58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-18soc/intel/common: Fix bugs for GPIO_LOCK_UNLOCKAseda Aboagye
Per the Intel External Design Specification (doc #618876), the opcode for GPIO_LOCK_UNLOCK is 0x13. This commit fixes a bug where the opcode was defined as 13 decimal instead of hexadecimal. Additionally, it fixes another issue where the `pcr_execute_sideband_msg()` function doesn't actually write the data when this opcode is selected. BUG=b:191189275 BRANCH=None TEST=With additional code that uses this opcode, verify that the lock functionality works by locking a pad in firmware and attempting to modify the configuration of the pad from the OS. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Ie14fff595474cdfd647c2b36f1eeb5e018f67375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55556 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18nvs: Add Chrome OS NVS (CNVS) information to coreboot tablesFurquan Shaikh
CB:51638 separated Chrome OS NVS from global NVS by allocating it separately in CBMEM. CNVS is used in depthcharge to fill firmware information at boot time. Thus, location of CNVS needs to be shared in coreboot tables for depthcharge to use. This change adds a new coreboot table tag `CB_TAG_ACPI_CNVS`/`CB_TAG_ACPI_CNVS`(0x41) which provides the location of CNVS in CBMEM to payload (depthcharge). Additionally, CB:51639 refactored device nvs(DNVS) and moved it to the end of GNVS instead of the fixed offset 0x1000. DNVS is used on older Intel platforms like baytrail, braswell and broadwell and depthcharge fills this at boot time as well. Since DNVS is no longer used on any new platforms, this information is not passed in coreboot tables. Instead depthcharge is being updated to use statically defined offsets for DNVS. BUG=b:191324611, b:191324611 TEST=Verified that `crossystem fwid` which reads fwid information from CNVS is reported correctly on brya. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3815d5ecb5f0b534ead61836c2d275083e397ff0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55665 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18arch/x86/include/arch/smp/mpspec: improve mp_bustype enum definitionFelix Held
Since the raw values of the enum elements are used, explicitly assign the value 0 to the first element to make it clearer that the absolute values matter here. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I69f58cca7130ce5f0ebe4743754e4e31f55db289 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-18soc/amd/picasso,stoneyridge/acpi: use defines for MADT parametersFelix Held
Using existing defines instead of magic values improves readability of the code. Also add comments to the MADT IRQ overrides to make it clearer what those actually do. TEST=Timeless build results in identical binary for amd/gardenia (Stoneyridge), amd/mandolin (Picasso) and amd/majolica (Cezanne) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I224ffbe8eb65bcdd5fc70c0ff8b15d55b3f6be01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55613 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/mediatek/mt8195: add mt6691 driverhenryc.chen
Add mt6691 buck control for DRAM to run fast calibration test. It is needed to get and set voltage during testing. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Change-Id: I4fb9f7245d44383a6a3a0cf8d00f7f503cbdeb06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55575 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18mb/google/cherry: enable display supportJitao Shi
To enable display, we have to: 1. Configure panel power and backlight 2. Configure eDP driver BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: Ida6c157a6a3bd904d3fa3dd2001385ced34f7711 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55574 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/mediatek/mt8195: add eDP supportJitao Shi
BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I37326ad053295aa4944c8291e4e7a7d69c8f3f63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55573 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/intel/common/block: fix storage size of HEST log addressRocky Phagura
This patch fixes the storage size to reflect the proper bits instead of bytes. It was a bug in the initial HEST patch (https://review.coreboot.org/c/coreboot/+/52090), and commit ID d4db36e672644ac7f528d12c5ce3539725456085 . Also fixed the comments to properly reflect the range being used. Change-Id: I9e968bb09f1c9cd805ff1d0849551b9c2ce2e2b6 Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55393 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18mb/intel/ehlcrb: Change default romsize and remove chromeos.fmdLean Sheng Tan
Change the default rom size to 32MB and remove chromeos.fmd because Chrome OS is not supported on EHL for now. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I49d9404eb901087037b5423a4a503c5271e14138 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55554 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/intel/jasperlake: Make use of FSP_ARRAY_LOAD macroLean Sheng Tan
Add FSP_ARRAY_LOAD macro for checking and loading array type configs into array type UPDs to increase readability. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ia20cabcaf9724882c68633eb9b510230e993768c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-18soc/intel/elkhartlake: Make use of FSP_ARRAY_LOAD macroLean Sheng Tan
Use FSP_ARRAY_LOAD macro for checking and loading array type configs into array type UPDs to increase readability. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I2562977e55f8909038697f7e19b82ec6b5e47fae Reviewed-on: https://review.coreboot.org/c/coreboot/+/55553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-18intel/fsp2_0: Add FSP_ARRAY_LOAD macroLean Sheng Tan
Add FSP_ARRAY_LOAD macro for checking and loading array type configs into array type UPDs to increase readability. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I307340a2bfc0a54f2ab7241af2f24dfbf8bb111d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55559 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18mb/google/bry: remove GSC option as it's not usedYH Lin
BUG=None BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I932178dc395a4a96682a2e2076131feb3342aa52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55597 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18drivers/intel/gma/opregion.c: Re-add lost log messageAngel Pons
Commit 926949d64c1d8ef49dcc6774dd8535a2cb1fd423 (drivers/intel/gma: Restructure IGD opregion init code) accidentally dropped this print statement. As it can be useful for debugging purposes, add it back. Change-Id: Iebd9e02bccc77538c0eed1e549294408586322f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55567 Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/intel/car/cache_as_ram.S: Fix typo in commentArthur Heymans
Change-Id: Ia91dbda44f60388324cf58dbccdbd2172dbff21d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55561 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18util/ifdtool: Add Elkhart Lake platform support under IFDv2Lean Sheng Tan
Add EHL under same family tree as TGL & JSL, also fix a spacing inconsistency line. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ice09861c104c4e339fc83631c75089fa069b3931 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55357 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18includes: Move *abs() declarations into `stdlib.h`Nico Huber
Change-Id: Id4df2d3210735bee737353d293450e59cf93bd9a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18includes: Remove dangling doxygen @}Nico Huber
Change-Id: I05e02f9689c1a6dafb3943657a3db975c2aeacbe Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55592 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18includes: Define `CHAR_BIT` in `limits.h`Nico Huber
Change-Id: Ib1d80d0c7457f90596ef5cd9d5ad0c4a33c8d473 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55591 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18includes: Provide `wchar.h` with `wchar_t` and `wint_t`Nico Huber
Change-Id: Iacb0e4eaf3f0b6bf843f3bfda5bdfde0f7a98808 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55590 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18includes: Add include guards to `stddef.h`Nico Huber
Change-Id: Ifae4f07abd75da9784967c2020eed2c3fe64afa0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55589 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18drivers/intel/mipi_camera: Remove unnecessary __packed attributeSugnan Prabhu S
This patch removes unnecessary __packed attribute from the structure defined in chip.h BUG=None TEST=Tested WFC camera on Brya Change-Id: I1174606cd22cd353f01d865d0c25bb6f8f8de055 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55566 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18google/trogdor: change board ID detect to tristate solution.Sheng-Liang Pan
change binary board ID to tri-state mode. BUG=b:190250108 BRANCH=None TEST=emerge-trogdor coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I79d1212abc227341be126969ef32e76a635cbdaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/55563 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/intel/adlrvp_m: Remove DP_HPD 1 & 2 definition from devicetreeBernardo Perez Priego
Due to latest corresponding UPD filling implementation, this is not required. This patch fixed the brokenness caused by Commit hash b10afbd2e2a8326fb21dc726a6c2bd53b06eb010. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I49e434f7bbafcb148e82202697e87c3e4268d7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-17mb/google/guybrush: Add helpers for cbi fw_config settingsMartin Roth
Turn on CBI and add helper functions for determining the board configuration from the firmware config settings in CBI. BUG=b:187316460 TEST=Built Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I212e7f413b4d8a7d15122cde90100a0ec28e88a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54639 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17soc/amd/stoneyridge: factor out AOAC offset definesFelix Held
Factoring out those defines brings the Stoneyridge SoC code a bit more in line with the Cezanne and Picasso SoC code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifba7f13cc926ac28376233aa0bf317164ca9bbd6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55588 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/google/brya/brya0: Update GPIO tables based on new board revTim Wawrzynczak
This change also restores GPIOs to their proper settings for prior board revs. BUG=b:189362981 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I89d7ba94dfbd5e4a000cdde7a0c65f38b53b722d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55325 Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/intel/adlrvp_m: Configure DP_HPD as PAD_NC and disable DdiPortHpdBernardo Perez Priego
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1), this causes redundancy with legacy HPD interruption. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=None TEST=Boot to kernel and verified no kernel HPD pins assertion message. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I80ef40a1aca19cd6ad56219175d2fd40890a393d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sanrio Alvares <sanrio.alvares@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-06-17mb/google/dedede/var/kracko: Configure I2C high and low timesTony Huang
Configure I2C high / low time in device tree to ensure I2C CLK runs under I2C_SPEED_FAST (400 kHz). Touchpad: 387.7kHz Touchscreen: 389.4kHz Audio: 387.6kHz P-sensor: 372.5kHz BaUG=b:178092096 BRANCH=dedede TEST=Build and EE check after tuning I2C clock is under 400kHz Change-Id: I4f6bdd3802cd94671325a89458cde981a2ffa929 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-17ec/google: Fix bad return valueRob Barnes
google_chromeec_get_event returns an event number and 0 when there's no event. This function is usually called in a loop until there are no more events, so it makes sense to return 0 (i.e. no event) when there's an error. BUG=b:184074997 TEST=Boot guybrush, no ec errors Change-Id: I6c0186e4637af9ae24f45cce3638f0913227d6a7 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-17mb/google/cherry: fix GPIO polarity for TPM interruptRex-BC Chen
The GPIO_GSC_AP_INT itself is active low, but the payloads will create the IRQ using its eint driver, which is active high. BUG=b:188392736 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie39f3b9a5dbe15057ef3e96f6c99211949692003 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-17mb/google/cherry: Add display configurationRex-BC Chen
BUG=b:189985956 Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Change-Id: I2b68f6342e7d46d90ea0e7aef9a01ecfd35f8fa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-17mb/lenovo/x230: Fix overridetrees not overridingAngel Pons
Any chip entry without a device node below them are silently dropped by sconfig. Copy the same device node from the devicetree to prevent this. Change-Id: I778f6b2d980e78142ae12ef941e7d9bd1f753057 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55540 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17soc/intel/{alderlake,tigerlake}: Fix typo in pmc.hWerner Zeh
"corredsponding" --> "corresponding" Change-Id: I0b0e5d461de29583c269896911167f8a44d84c2a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55555 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17nb/intel/ironlake: Factor out common uncore ASLAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I7e37d32251fa3dcc64aec62dd2d814463c4a9999 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55580 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17soc/amd/picasso: introduce and use devicetree aliases for UART0-3Felix Held
Since the default state of the MMIO UART devices in the chipset devicetree is off, the mainboard devicetree entries that disable MMIO UART devices are removed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I913a587802020ce4e182b48632cdde1104c2a6e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55545 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17arch/x86/walkcbfs.S: Fix the cbfs base addr for some fmapArthur Heymans
Defining the memory mapped base in fmap for example "FLASH@0xff800000 0x80000" for a 8M flash is optional in fmap files. This will also reflect in the generated fmap_config.h. Fix the assembly cbfs walker walkcbfs.S for fmap lacking a definition of the flash base. Change-Id: I96b18f675e625abee503648ffdc6031978a4269a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-06-17mb/google/dedede: Create cappy variantZhi Li
Create the cappy variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:190515828 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_CAPPY Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: Id5a3b0cb475ee77a9f62523d8322a5e4123ce3be Reviewed-on: https://review.coreboot.org/c/coreboot/+/55451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-17device: Add helper function devfn_disable()Subrata Banik
devfn_disable() function is used to disable a device based on given bus, device function number. This function checks if the device is at enable state and disables the device. Change-Id: Ia4a8bfec7fc95c729a5bb156f88e9aab3bf5dd41 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-17mb/google/dedede/var/pirika: Add camera supportAlex1 Kao
Add camera support in devicetree. BUG=b:190797339 BRANCH=None. TEST=built pirika firmware and verified camera function is OK. Change-Id: I66ded32105f3166e2faec3ea5dcfb93c29822366 Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55450 Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/google/brya: Configure WWAN GPIO earlyVarshit Pandya
In order to meet timing requirement of WWAN reseting it in early GPIOs and asserting Reset GPIO in ramstage BUG=b:180166408 TEST=Build and boot Brya system and verify enumeration of L850 and FM350 devices Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: Id6d69696b6c645eec3fa314a608c69214bafba82 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54912 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17soc/intel/common/pmc: Avoid unnecessary writes of AFTERG3_ENNico Huber
pmc_set_power_failure_state() is usually called twice, once upon boot (with `target_on == true`) and once from SMM when the system is shut down (with `target_on == false`). Assuming settings didn't change between these calls, there is only one case where we actually need to write the register value: when updating the state for the MAINBOARD_POWER_STATE_PREVIOUS feature. This suits us well as we want to avoid unnecessary writes so we don't clobber the value set upon boot from within SMM. Due to inaccessible option backends, SMM might not know the current option state. The assumption above, that the option value didn't change, may not be true if the user changed the option on purpose. In the future, one would have to reboot the machine for option changes to take effect. However, this doesn't seem to make a huge difference: One already needed a controlled shutdown for the update to take effect before. A reboot doesn't seem much more expensive. Change-Id: I58dd74b8b073f4f07db090bf7fddb14b5df8239a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55539 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17soc/intel/alderlake/romstage: Refactor soc_memory_init_params functionSubrata Banik
This patch create separate helper functions to fill-in required FSP-M UPDs as per IP initialization categories. This would help to increase the code readability and in future meaningful addition of FSP-M UPDs is possible rather adding UPDs randomly. TEST=FSP-M UPD dump shows no change without and with this code change. Change-Id: I5f23292fd1bd44d0cd55fbefd490b090ccd48365 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55225 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/*: Fix some indirect includesKyösti Mälkki
Fix build failures in the case <vc/.../chromeos.h> is removed. Change-Id: Ie45066f39cd6fb92cca697a6bd5bc8bb8c60b4e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-173rdparty/libgfxinit: Update to latest ToTPatrick Georgi
This brings in three new commits that are mostly concerned about fixing the build with gcc 11. Change-Id: I35f9100e2bfb2a261b3a0a128697550caf5840d9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55498 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16timestamp,amd/common/apob_cache: Add timestamps for APOBRaul E Rangel
Updating the APOB takes a considerable amount of time. I decided to be granular and split out the operations so we know when we read vs read + erase + write. BUG=b:179092979 TEST=Boot guybrush and dump timestamps 3:after RAM initialization 3,025,425 (44) 920:starting APOB read 3,025,430 (5) 921:starting APOB erase 3,025,478 (48) 922:starting APOB write 3,027,727 (2,249) 923:finished APOB 3,210,965 (183,238) 4:end of romstage 3,210,971 (6) Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I08e371873112e38f623f452af0eb946f5471c399 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-16arch/x86/ioapic: Clear vector table firstKyösti Mälkki
Always clear vector 0 entry before optionally overwriting it with the i8259 timer redirection. Change-Id: Ia2e96f43e6494711f9fc4fd74229f5817b04b48d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55286 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16sb/intel/i82870: Use ioapic utility functionsKyösti Mälkki
Change-Id: I60ce17fd7640fab064a3d62d8d2b3703993c7b59 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55309 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16arch/x86/ioapic: Drop irq_on_fsb as a configurable itemKyösti Mälkki
APIC Serial Bus pins were removed with ICH5 already, so a choice 'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG 0x3 is also not documented since ICH5. For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was wrong and ignored as BOOT_CONFIG register emulation was never implemented. For ICH4 and earlier, the choice to use FSB can be made based on the installed CPU model but this is now just hardwired to match P4 CPUs of aopen/dxplplusu. For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined and the only possible operation mode there is APIC Serial Bus, which requires no configuration. Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16soc/amd/picasso/Kconfig: fix CONSOLE_UART_BASE_ADDRESS for SoC UART2Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6deb2a4c632d39112dcce71f076742a1b62ee89b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-16mb/google/zork: enable UART0 in devicetreeFelix Held
This a mainly a preparation for adding the MMIO UART devices to the chipset devicetree. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I533e4a909fdeb1614dbc5df015440b9df5d83233 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/picasso: introduce and use devicetree aliases for I2C2&I2C3Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I06102f4fcc3bf9de332c71a52c632241b95cde19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-16soc/amd/common/block/acpi/bert: fix NULL checkFelix Held
In acpi_soc_get_bert_region after the bert_errors_region call is was checked if the region parameter is NULL after the call; since region is a parameter of acpi_soc_get_bert_region, it's non-NULL. What we should be checking here is if region points to a non-NULL pointer. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Coverity (CID:1457506) Change-Id: I0523504d65725ab2d2df4db28a5dedd90697b917 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-16soc/amd/cezanne/include/soc/iomap: add eMMC MMIO base addressesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie97bd6ad076f0ce35fc997d954a003a1252184e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-16soc/amd/cezanne,picasso/include/soc/iomap: reflow I2C_DEVICE_COUNTFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7edae2142120dec9e11ef823b561401b7e0bc208 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-16soc/amd/cezanne/acpi/mmio: use AOAC offset definesFelix Held
Even though the code is currently commented out, replace the magic numbers with the existing defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id0dbbadf71f2e5a4d23ee998e2aa0a8b67205845 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-16soc/amd/cezanne: factor out AOAC offset definesFelix Held
Factoring out those defines allows using them easily in the ACPI code without having to use preprocessor macros. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib9dfddb0d4f32a542fa652ff8c14e932c224f247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/picasso/acpi/sb_fch: use AOAC offset definesFelix Held
Replace the magic numbers with the existing defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2d98ea8c5bb0e487c7eef0b0a1cdada9cb04df4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/picasso: factor out AOAC offset definesFelix Held
Factoring out those defines allows using them easily in the ACPI code without having to use preprocessor macros. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I99cb03de8782a0eeeb505f567b982099b0e8a18d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/cezanne,picasso: add AOAC offset define for the eMMC controllerFelix Held
BUG=b:184978118 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I03554a151aa6a6d9e15d74c63cd02239b788808a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16sb/intel/lynxpoint: Update xHCI _PS0 and _PS3 methodsAngel Pons
Lynx Point PCH ACPI reference code version 1.9.1 has two additional magic steps, which were already present in Broadwell. Add them. Change-Id: Ia8ca6dcfcfb4ed6b0d957d249b93640ef74670d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16MRC platforms: Fix MRC version printk format specifiersAngel Pons
The printed values are unsigned, and should be printed accordingly. Change-Id: Ie5edce914c389c70460b1ed3390731e3568340dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16soc/intel/broadwell: Drop `config_t` typedefAngel Pons
The typedef needlessly hides the actual type of the variables. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I58a58cd402ec679960f460e80b37ff2afb8e3974 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16cpu/intel/haswell: Select `HAVE_DISPLAY_MTRRS`Angel Pons
This option is valid for Broadwell as well as Haswell. Change-Id: I4f1e9663806bae279f6aca36f09a0c989c12e507 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 21:03:45 +0000