summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-25Intel GM45, 945, SNB: Move `multiply_to_tsc()` to `tsc.h`Ronald G. Minnich
multiply_to_tsc was being copied everywhere, which is bad practice. Put it in the tsc.h include file where it belongs. Delete the copies of it. Per secunet, no copyright notice is needed. This might be a good time to get a copyright notice into tsc.h anyway. Change-Id: Ied0013ad4b1a9e5e2b330614bb867fd806f9a407 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3242 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-24cpu/amd/agesa/Kconfig: Select LAPIC_MONOTONIC_TIMERPaul Menzel
Thanks to Aaron Durbin coreboot provides monotonic timers. Select the LAPIC monotonic timer for the AMD AGESA CPUs. The following is an excerpt from serial log of the ASRock E350M1. $ grep usec seriallog-20130502_100902.log 01.016: Root Device init 1578 usecs 01.029: CPU_CLUSTER: 0 init 112415 usecs 01.029: PCI: 00:00.0 init 3240 usecs 01.088: PCI: 00:01.0 init 104572 usecs 01.088: PCI: 00:01.1 init 1663 usecs 01.088: PCI: 00:11.0 init 1662 usecs 01.088: PCI: 00:14.0 init 1662 usecs 01.088: PCI: 00:14.3 init 8665 usecs 01.088: PCI: 00:14.4 init 1665 usecs 01.088: PCI: 00:18.0 init 1662 usecs 01.088: PCI: 00:18.1 init 1663 usecs 01.088: PCI: 00:18.2 init 1663 usecs 01.088: PCI: 00:18.3 init 1663 usecs 01.088: PCI: 00:18.4 init 1663 usecs 01.088: PCI: 00:18.5 init 1665 usecs 01.088: PCI: 00:18.6 init 1664 usecs 01.088: PCI: 00:18.7 init 1663 usecs 01.088: PNP: 002e.2 init 1576 usecs 01.088: PNP: 002e.5 init 1577 usecs 01.088: PNP: 002e.a init 1590 usecs 01.088: PNP: 002e.b init 30144 usecs 01.088: PCI: 03:00.0 init 1663 usecs So the graphics device needs around 100 ms for being initialized. The full serial log is in the Gerrit comments. Change-Id: Ia7b3012e51fcf94b0f22290cdef2b4424295ad6d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3172 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-05-24cpu/intel/haswell/Kconfig: Intend help text with two spacesPaul Menzel
Commit »haswell: 24MHz monotonic time implementation« (c46cc6f1) [1] added the Kconfig variable `MONOTONIC_TIMER_MSR` with a help text, but only used one space instead of the suggested two spaces for indentation. So add one space. »Lines under a "config" definition are indented with one tab, while help text is indented an additional two spaces.« [2] [1] http://review.coreboot.org/3153 [2] https://www.kernel.org/doc/Documentation/CodingStyle (Chapter 10: Kconfig configuration files) Change-Id: I39cf356bfd54c66a2f1b837c6667dcc915e41f29 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3262 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-23include/timer.h: Fix typo in in*iti*alize in commentPaul Menzel
Correct a typo in a comment introduced in commit »coreboot: introduce monotonic timer API« (a421791d) [1]. [1] http://review.coreboot.org/3152 Change-Id: Ia0abc5304547d419478db1ae37b5525406fa19cc Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3261 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-23Intel Sandy Bridge: udelay.c: Change comparison from <= to <Paul Menzel
Currently code in `udelay.c` differs between the Intel northbridges GM45, 945 on the one hand and Sandy Bridge on the other hand. The reason for this is that a wrong comparison > was used. The following commit commit 784ffb3db694dd2c964d9a4e1c6657a835b2d141 Author: Sven Schnelle <svens@stackframe.org> Date: Tue Jan 10 12:16:38 2012 +0100 i945: fix tsc udelay() Reviewed-on: http://review.coreboot.org/530 fixed the sign from > to <, whereas Stefan Reinauer changed it from > to <= before adding the Sandy Bridge port in the following commit. commit 00636b0daefc3c499990744226a0e1a316d71731 Author: Stefan Reinauer <stefan.reinauer@coreboot.org> Date: Wed Apr 4 00:08:51 2012 +0200 Add support for Intel Sandybridge CPU (northbridge part) Reviewed-on: http://review.coreboot.org/854 As there are no technical reasons for this difference, unify this between the chipsets. See the discussion of the other patch set in Gerrit [1]. [1] http://review.coreboot.org/#/c/3220/1/src/northbridge/intel/i5000/udelay.c Change-Id: I64f2aa1db114ad2e9f34181c5f3034f6a8414a11 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3259 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-05-23Kconfig: Remove duplicate entry for `USE_OPTION_TABLE`Paul Menzel
The following commit commit eb50c7d922e91f0247b3705eccb2d2eec638c277 Author: Edwin Beasant <edwin_beasant@virtensys.com> Date: Tue Jul 6 21:05:04 2010 +0000 Re-integrate "USE_OPTION_TABLE" code. added a duplicate entry `config USE_OPTION_TABLE`. Remove it again. Change-Id: I3ff64c360bad531439e74fa1b25a06c4a447a33f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3165 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-22intel/gm45: Add more debug output to read/write trainingNico Huber
Add debug output for the timing values of the edges found during read and write training. Now, output for one DIMM of DDR3-1066 in a roda/rk9 looks like: [...] Lower bound for byte lane 0 on channel 0: 0.0 Upper bound for byte lane 0 on channel 0: 8.4 Final timings for byte lane 0 on channel 0: 4.2 Lower bound for byte lane 1 on channel 0: 0.0 Upper bound for byte lane 1 on channel 0: 10.2 Final timings for byte lane 1 on channel 0: 5.1 Lower bound for byte lane 2 on channel 0: 0.0 Upper bound for byte lane 2 on channel 0: 7.5 Final timings for byte lane 2 on channel 0: 3.6 Lower bound for byte lane 3 on channel 0: 0.0 Upper bound for byte lane 3 on channel 0: 11.4 Final timings for byte lane 3 on channel 0: 5.6 Lower bound for byte lane 4 on channel 0: 0.0 Upper bound for byte lane 4 on channel 0: 9.4 Final timings for byte lane 4 on channel 0: 4.6 Lower bound for byte lane 5 on channel 0: 0.0 Upper bound for byte lane 5 on channel 0: 11.2 Final timings for byte lane 5 on channel 0: 5.5 Lower bound for byte lane 6 on channel 0: 0.0 Upper bound for byte lane 6 on channel 0: 8.4 Final timings for byte lane 6 on channel 0: 4.2 Lower bound for byte lane 7 on channel 0: 0.0 Upper bound for byte lane 7 on channel 0: 10.4 Final timings for byte lane 7 on channel 0: 5.2 Lower bound for group 0 on channel 0: 1.7.5 Upper bound for group 0 on channel 0: 2.2.2 Final timings for group 0 on channel 0: 1.10.7 Lower bound for group 1 on channel 0: 1.6.1 Upper bound for group 1 on channel 0: 2.0.2 Final timings for group 1 on channel 0: 1.9.1 Lower bound for group 2 on channel 0: 2.0.7 Upper bound for group 2 on channel 0: 2.8.1 Final timings for group 2 on channel 0: 2.4.4 Lower bound for group 3 on channel 0: 2.4.7 Upper bound for group 3 on channel 0: 3.0.0 Final timings for group 3 on channel 0: 2.8.3 [...] Final timings are always the average of the two bounds. The last dots separate eights (not decimals) and the middles are elenvenths or twelfths depending on the clock speed (twelfths in this case). Change-Id: Idb7c84b514716c7265b94890c39b7225de7800dc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3257 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Handle overflows during DDR3 write trainingNico Huber
We halted the machine on any overflow during the write training. However, overflows during the search for a good to bad edge are non-fatal, and should be ignored. Change-Id: I45ccbabc214e208974039246d806b0d2ca2fdc03 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3256 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Refactor DDR3 write trainingNico Huber
Split some code in individual functions. It's the refactoring part of a bigger change, following... Change-Id: Id19be4588ad8984935040d9bcba4d7c5f2e1114f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3255 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Handle overflows during DDR3 read trainingNico Huber
We halted the machine on any overflow during the read training. However, overflows during the search for a good to bad edge are non-fatal, and should be ignored. Change-Id: I77085840ade25bce955480689c84603334113d1f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3254 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Refactor DDR3 read trainingNico Huber
Split some code in individual functions. It's the refactoring part of a bigger change, following... Change-Id: Ied551a011eaf22f6f8f6db0044de3634134f0b37 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3253 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-22intel/gm45: Fix interpretation of VT-d disable bitNico Huber
When configuring the GTT size for the integrated graphics, the state of VT-d was read wrong. Bit 48 of CAPID0 (D0F0) is set when VT-d is _disabled_. In the log of a VT-d enabled roda/rk9 we have now: [...] VT-d enabled [...] IGD decoded, subtracting 32M UMA and 4M GTT [...] Without this patch, only 2M GTT were reported. Change-Id: I87582c18f4769c2a05be86936d865c0d1fb35966 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3252 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-21intel/i5000: Remove unused copy of udelay.cNico Huber
It's a copy from i945 and looks like not beeing included in a build at all. If you should ever want to use that file for the Intel 5000, please copy it from another chipset like the Intel 945 as it is going to be improved. Change-Id: I5c113bb0b2fed7b93feb3dcb1b5d962e1442963a Reported-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3219 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-20AMD AGESA Hudson: Include `stdint.h` and `io.h` to fix buildPaul Menzel
Apparently the files `smbus.{h,c}`, where never used and therefore build beforehand. Needing one function in them for the ASUS F2A85-M the build fails as some headers are missing. Including the headers `stdint.h` and `io.h` fixes the following errors. […] CC southbridge/amd/agesa/hudson/smbus.romstage.o In file included from src/southbridge/amd/agesa/hudson/smbus.c:23:0: src/southbridge/amd/agesa/hudson/smbus.h:67:24: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:67:43: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:67:55: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:25: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:44: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:56: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:68:69: error: unknown type name 'u8' src/southbridge/amd/agesa/hudson/smbus.h:69:24: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:69:43: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:70:24: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:70:43: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:70:55: error: unknown type name 'u8' src/southbridge/amd/agesa/hudson/smbus.h:71:20: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:35: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:49: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:59: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:71:69: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:20: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:35: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:49: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:72:59: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:20: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:32: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:44: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.h:73:54: error: unknown type name 'u32' src/southbridge/amd/agesa/hudson/smbus.c: In function 'smbus_delay': src/southbridge/amd/agesa/hudson/smbus.c:27:2: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration] src/southbridge/amd/agesa/hudson/smbus.c:27:2: error: implicit declaration of function 'inb' [-Werror=implicit-function-declaration] […] Probably all the (AMD(?)) `smbus.{h,c}` suffer from this and should be fixed. Even better, as these function do not differ between most boards, the file should be moved out from the specific southbridge directories. [1] http://qa.coreboot.org/job/coreboot-gerrit/6168/testReport/junit/(root)/board/i386_asus_f2a85_m/ Change-Id: I285101fa06a365da44fa27b688c536e614d57f50 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3202 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-05-20ASUS F2A85-M: romstage.c: Set RAM voltage for non 1.5 Volt casePaul Menzel
Currently the code in the if statement if (!byte) do_smbus_write_byte(0xb20, 0x15, 0x3, byte); only gets executed if `byte == 0x0`, that means only in the default case where RAM voltage is 1.5 Volts. But the RAM voltage should be changed when configured for the non-default case. So negate the predicate to alter the RAM voltage for the non-default cases. To prevent the build error OBJCOPY cbfs/fallback/coreboot_ram.elf coreboot-builds/asus_f2a85-m/generated/crt0.romstage.o: In function `cache_as_ram_main': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/mainboard/asus/f2a85-m/romstage.c:106: undefined reference to `do_smbus_write_byte' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 add `southbridge/amd/agesa/hudson/smbus.c` providing the function `do_smbus_write_byte` to ROM stage in `Makefile.inc`. That can actually be used after the needed header files are included in a previous commit. Change-Id: I89542479c4cf6d412614bcf4586ea98e097328d6 Reported-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3200 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-20Make: Use unaltered object list for dependency inclusionNico Huber
It looks like the inclusion of dependency files was broken for all ramstage objects since the list of those gets processed through the ramstage-postprocess macro. Fix that by taking the unaltered list for dependency files. The output of `make printall` (look for DEPENDENCIES=) shows which dependency files will be included. See also: commit 79f9010e80a04f2e0fb0cca5759e3215dff79aff Author: Patrick Georgi <patrick@georgi-clan.de> Date: Sun Nov 25 14:31:08 2012 +0100 build system: Add hook to postprocess classes (object lists) and: commit f33e395213f0516a9256f33ede4c6bba3babb0e9 Author: Patrick Georgi <patrick@georgi-clan.de> Date: Sun Nov 25 17:10:47 2012 +0100 build system: Split linking into multiple steps Change-Id: If93b1773c5d53240f98382aab11bf7f5a4649ee8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-17AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferBruce Griffith
The following commit commit 05f3b117dd44776ed17bc57318f260766039b7e8 Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Tue May 14 09:28:26 2013 +0200 AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for buffer Reviewed-on: http://review.coreboot.org/3246 changed one calculation for the size of the array PortList[] to reflect only four elements, but neglected three additional calculations of the size of the same table. Correct that by setting the size for four array elements in all four calculations. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: Ib66b7b2b388d847888663e9eb6d1c8c9d50b9939 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3250 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-16AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferPaul Menzel
The following commit commit d0790694b0a66353e5531715648ddaa1a6d577cb Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:37 2012 +0800 Inagua: Inagua GNB ddi lanes and pcie lanes config update Reviewed-on: http://review.coreboot.org/544 assigns lanes 4 and 5 to PCI device number 4, but does not adapt the rest of the code. After the commit above, the array `PortList []` only has four elements, but the buffer size `AllocHeapParams.RequestedBufferSize` is set to a size as it still has five elements. Correct that by setting the size for four array elements. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: I3ff07f308ffd417d2bf73117eda9da2a1a05f199 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3246 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-16haswell: enable cache-as-ram migrationAaron Durbin
The haswell code allows for vboot ramstage verification. However, that code path relies on accessing global cache-as-ram variables after cache-as-ram is torn down. In order to avoid that situation enable cache-as-ram migration. cbmemc_reinit() no longer needs to be called from romstage because it is invoked automatically by the cache-as-ram migration infrastructure. Change-Id: I08998dca579c167699030e1e24ea0af8802c0758 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3236 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16cbmem console: use cache-as-ram API and cleanupAaron Durbin
Allow for automatic cache-as-ram migration for the cbmem console. The code was refactored in the thought of making it easier to read. The #ifdefs still exist, but they are no longer sprinkled throughout the code. The cbmem_console_p variable now exists globally in both romstage and ramstage. However, the cbmem_console_p is referenced using the cache-as-ram API. When cbmem is initialized the console is automatically copied over by calling cbmemc_reinit() through a callback. Change-Id: I9f4a64e33c58b8b7318db27942e37c13804e6f2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16chromeos: use cache-as-ram migration API for vbnvAaron Durbin
It's possible that the vbnv global variables may be accessed in romstage after cache-as-ram is torn down. Therefore use the cache-as-ram migration API. Wrappers were written to wrap the API to keep the existing code as close as possible. Change-Id: Ia1d8932f98e00def0a44444a1ead0018a59d3d98 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16pc80/tpm: allow for cache-as-ram migrationAaron Durbin
As the TPM driver can be accessed in romstage after cache-as-ram is torn down use the cache-as-ram migration API to dynamically determine the global variable address. Change-Id: I149d7c130bc3677ed52282095670c07a76c34439 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3233 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16x86: add cache-as-ram migration optionAaron Durbin
There are some boards that do a significant amount of work after cache-as-ram is torn down but before ramstage is loaded. For example, using vboot to verify the ramstage is one such operation. However, there are pieces of code that are executed that reference global variables that are linked in the cache-as-ram region. If those variables are referenced after cache-as-ram is torn down then the values observed will most likely be incorrect. Therefore provide a Kconfig option to select cache-as-ram migration to memory using cbmem. This option is named CAR_MIGRATION. When enabled, the address of cache-as-ram variables may be obtained dynamically. Additionally, when cache-as-ram migration occurs the cache-as-ram data region for global variables is copied into cbmem. There are also automatic callbacks for other modules to perform their own migration, if necessary. Change-Id: I2e77219647c2bd2b1aa845b262be3b2543f1fcb7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3232 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-15libpayload: Fix the logic for hardware-less serial consolesDave Frodin
This fixes the configuration where serial console output is being sent to non-existant hardware to be captured with I/O trapping. In this configuration where there isn't serial hardware present we still want to init the consoles. We just never want to read non-existant hardware. Change-Id: Ic51dc574b9c0df3f6ed071086b0fb2119afedc44 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3249 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14EXYNOS5250/SNOW: fix the build script. Add a script to get the bl1.Ronald G. Minnich
build-snow got broken when the snow makefile improved. So fix it. While we're at it, create a script like the update-microcode scripts that gets the bl1. I thought about making this a common script but the various names and paths always evolve, leaving me thinking it's not worth it. This script is just a piece of the snow build script. Change-Id: I65c0f8697a978c62fe12533c4f0152d14dbaefda Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3238 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-14AMD Fam15tn boards: BiosCallOuts.c: Declare codec arrays as `static`Paul Menzel
These arrays are declared as `static` for AMD SB800 based boards, so do the same for this generation. Rudolf Marek just changed `const CODEC_TBL_LIST` to `static const` in [1]. Adapt all Fam15tn based boards (AMD Parmer, AMD Thatcher, ASUS F2A85-M) to keep the differences between them small. [1] http://review.coreboot.org/#/c/3170/3/src/mainboard/asus/f2a85-m/BiosCallOuts.c Change-Id: I353b38bd8bc77ba500a4b7fe9250e9aa3071c530 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3198 Tested-by: build bot (Jenkins)
2013-05-14AMD Fam15tn boards: Document lane ID mapping from BKDGRudolf Marek
To make it easier to fill in the values, place the table from the BIOS and Kernel Developer’s Guide (BKDG) [1] as a comment. [1] http://www.coreboot.org/Datasheets#AMD_Fam15 Change-Id: I218f76e9fa2dc88d47af51ea6c062e315afb0000 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3221 Tested-by: build bot (Jenkins)
2013-05-14x86: add thread supportAaron Durbin
Thread support is added for the x86 architecture. Both the local apic and the tsc udelay() functions have a call to thread_yield_microseconds() so as to provide an opportunity to run pending threads. Change-Id: Ie39b9eb565eb189676c06645bdf2a8720fe0636a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3207 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14coreboot: add thread cooperative multitaskingAaron Durbin
The cooperative multitasking support allows the boot state machine to be ran cooperatively with other threads of work. The main thread still continues to run the boot state machine (src/lib/hardwaremain.c). All callbacks from the state machine are still ran synchronously from within the main thread's context. Without any other code added the only change to the boot sequence when cooperative multitasking is enabled is the queueing of an idlle thread. The idle thread is responsible for ensuring progress is made by calling timer callbacks. The main thread can yield to any other threads in the system. That means that anyone that spins up a thread must ensure no shared resources are used from 2 or more execution contexts. The support is originally intentioned to allow for long work itesm with busy loops to occur in parallel during a boot. Note that the intention on when to yield a thread will be on calls to udelay(). Change-Id: Ia4d67a38665b12ce2643474843a93babd8a40c77 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14AMD Brazos/Trinity boards: PlatformGnbPcie.c: Reserve correct amount of memoryPaul Menzel
In `PlatformGnbPcie.c` AGESA functions are used to reserve memory space to save the PCIe configuration to. This is the With the following definitions in `AGESA.h` $ more src/vendorcode/amd/agesa/f14/AGESA.h […] /// PCIe port descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info } PCIe_PORT_DESCRIPTOR; /// DDI descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info } PCIe_DDI_DESCRIPTOR; /// PCIe Complex descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in topology */ IN UINT32 SocketId; ///< Socket Id IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN VOID *Reserved; ///< Reserved for future use } PCIe_COMPLEX_DESCRIPTOR; […] memory has to be reserved for the `PCIe_COMPLEX_DESCRIPTOR` and, as two struct members are pointers to arrays with elements of type `PCIe_PORT_DESCRIPTOR` and `PCIe_DDI_DESCRIPTOR`, space for these times the number of array elements have to be reserved: a + b * 5 + c * 2. sizeof(PCIe_COMPLEX_DESCRIPTOR) + sizeof(PCIe_PORT_DESCRIPTOR) * 5 + sizeof(PCIe_DDI_DESCRIPTOR) * 2; But for whatever reason parentheses were put in there making this calculation incorrect and reserving too much memory. (a + b * 5 + c) * 2 So, remove the parentheses to reserve the exact amount of memory needed. The ASRock E350M1 still boots with these changes. No changes were observed as expected. Rudolf Marek made this change as part of his patch »ASUS F2A85-M: Correct and clean up PCIe config« [1]. Factor this hunk out as it affects all AMD Brazos and Trinity based boards. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I32e8c8a3dfc5e87eb119eb17719d612e57e0817a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3239 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-12Revert "PC Engines ALIX.1C: Add CMOS defaults."Peter Stuge
Revert commit f90071faeee3358748d0c8d31e46721b53241e28 [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h GEN build.h SCONFIG mainboard/pcengines/alix1c/devicetree.cb CC arch/x86/lib/cbfs_and_run.romstage.o CC arch/x86/lib/memcpy.romstage.o CC arch/x86/lib/memset.romstage.o CC arch/x86/lib/rom_media.romstage.o CC arch/x86/lib/romstage_console.romstage.o CC console/die.romstage.o CC console/post.romstage.o CC console/vtxprintf.romstage.o CC device/device_romstage.romstage.o CC lib/cbfs.romstage.o CC lib/compute_ip_checksum.romstage.o CC lib/gcc.romstage.o CC lib/lzma.romstage.o CC lib/memchr.romstage.o CC lib/memcmp.romstage.o CC lib/memmove.romstage.o CC lib/ramtest.romstage.o CC lib/uart8250.romstage.o CC southbridge/amd/cs5536/smbus.romstage.o ROMCC generated/bootblock.inc GEN generated/bootblock.ld make: *** No rule to make target `nvramtool', needed by `coreboot-builds/pcengines_alix1c/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/#/c/3229/ [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_pcengines_alix1c/ Change-Id: I4764d90c39ccdb4dc7e7a9aef7525c306614e1a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-12Revert "Asus M4A785T-M: Add CMOS defaults."Peter Stuge
Revert commit b8b3e8bff32ee7dddcacec11e015f6683783eb2f [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h SCONFIG mainboard/asus/m4a785t-m/devicetree.cb make: *** No rule to make target `nvramtool', needed by `coreboot-builds/asus_m4a785t-m/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/3224 [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_asus_m4a785t_m/ Change-Id: I8bf33b62b56627f0eea9440ff5e5136e4122ef01 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3244 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-11Remove the wtm1 mainboardDuncan Laurie
This was an early bring-up reference board for ULT but it is no longer being worked on and was never complete enough to be useful and I no longer have a board so it is already stale and untested. All ULT bring-up work has moved to the wtm2 mainboard instead. Change-Id: If64d61bf7a3fc8c9e16096ffc28fa4128aa99477 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3231 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-11PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Iba2701d4611cd2c2e5a2d76d41ffc23ed65574e8 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-11Make early x86 POST codes written to IO port optionalMartin Roth
This continues the work done in patch 6b908d08ab http://review.coreboot.org/#/c/1685/ and makes the early x86 post codes follow the same options. Change-Id: Idf0c17b27b3516e79a9a53048bc203245f7c18ff Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-11haswell: Fix VGA option rom INT15 handlerDuncan Laurie
The format of this function changed but was not updated in all mainboards. This fixes BaskingRidge and WTM2. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Ia717ae14f99cee6d83ccdb1e26b9d7defe1638c4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3230 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10romcc: support attribute((packed))Stefan Reinauer
right now this is just a fake option to get rid of ifdefs in coreboot's code. Change-Id: I59233f3c1d266b4e716a5921e9db298c7f96751d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3225 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-10Get rid of MAXIMUM_CONSOLE_LOGLEVEL; compile all messages into the coreboot ↵Ronald G. Minnich
binary This option has never had much if any use. It solved a problem over 10 years ago that resulted from an argument over the value or lack thereof of including all the debug strings in a coreboot image. The answer is in: it's a good idea to maintain the capability to print all messages, for many reasons. This option is also misleading people, as in a recent discussion, to believe that log messges are controlled at build time in a way they are not. For the record, from this day forward, we can print messages at all log levels and the default log level is set at boot time, as directed by DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and if you are having trouble override it in CMOS and get more messages. Besides, a quick glance shows it's always set to max (9 in this case) in the very few cases (1) in which it is set. Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3188 Tested-by: build bot (Jenkins)
2013-05-10Get rid of a number of __GNUC__ checksStefan Reinauer
In the process of streamlining coreboot code and getting rid of unneeded ifdefs, drop a number of unneeded checks for the GNU C compiler. This also cleans up x86emu/types.h significantly by dropping all the duplicate types in there. Change-Id: I0bf289e149ed02e5170751c101adc335b849a410 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3226 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-10Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ifa09c7a468e3e0713b426763266ae633e67d8397 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10AMD Thatcher: remove unused macros in PlatformGnbPcieComplex.hSiyuan Wang
The macros GNB_GPP_PORTx_PORT_PRESENT, GNB_GPP_PORTx_SPEED_MODE, GNB_GPP_PORTx_LINK_ASPM and GNB_GPP_PORTx_CHANNEL_TYPE are not used. Change-Id: I5c7b7d45880367dba452ebcd4f01fbd0c15aac22 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3087 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-10northbridge/intel/i5000/udelay.c: Remove unused header `console.h`Paul Menzel
Nothing from the header `console.h` is needed in `udelay.c`, so do not include it. This header was included since commit »Add Intel i5000 Memory Controller Hub« (17670866) [1]. [1] http://review.coreboot.org/491 Change-Id: Ie136a1b862b55c9471f9293ed616ce27a1d01a50 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3218 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08x86: use asmlinkage macro for smm_handler_tAaron Durbin
The smm_handler_t type was added before the introduction of the asmlinkage macro. Now that asmlinkage is available use it. Change-Id: I85ec72cf958bf4b77513a85faf6d300c781af603 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3215 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-05-08cbfs_core.c: make cfbs searches even less verboseDave Frodin
The cbfs core code would print out the name of the file it is searching for and when it is found would print out the name again. This contributes to a lot of unnecessary messages in a functioning payload’s output. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: Ib238ff174bedba8eaaad8d1d452721fcac339b1a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3208 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08src/cpu/amd/agesa/Kconfig: Use tabs instead of spaces for alignmentPaul Menzel
Some entries still used spaces while others used tabulators[1]. Convert spaces to tabs to uniformly use tabs. ---------------------- 8< -------------- 8< ----------------------------- For all of the Kconfig* configuration files throughout the source tree, the indentation is somewhat different. Lines under a "config" definition are indented with one tab, while help text is indented an additional two spaces. [2] ---------------------- 8< -------------- 8< ----------------------------- [1] http://en.wikipedia.org/wiki/File:HollerithMachine.CHM.jpg [2] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/CodingStyle?id=HEAD Change-Id: Iee80ad4a90e95b925afbb0c6adc563fa3a6503cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3173 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-07x86: harden tsc udelay() functionAaron Durbin
Since the TSC udelay() function can be used in SMM that means the TSC can count up to whatever value. The current loop was not handling TSC rollover properly. In most cases this should not matter as the TSC typically starts ticking at value 0, and it would take a very long time to roll it over. However, it is my understanding that this behavior is not guaranteed. Theoretically the TSC could start or be be written to with a large value that would cause the rollover. Change-Id: I2f11a5bc4f27d5543e74f8224811fa91e4a55484 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3171 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-07Intel 82801Gx: LPC: Unify I/O APIC setupPaul Menzel
Remove local copies of reading and writing I/O APIC registers by using already available functions. This change is similar to commit db4f875a412e6c41f48a86a79b72465f6cd81635 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Jan 31 17:24:12 2012 +0200 IOAPIC: Divide setup_ioapic() in two parts. Reviewed-on: http://review.coreboot.org/300 and commit e614353194c712a40aa8444a530b2062876eabe3 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Feb 26 17:24:41 2013 +0200 Unify setting 82801a/b/c/d IOAPIC ID Reviewed-on: http://review.coreboot.org/2532 and uses `io_apic_read()` and `io_apic_write()` too. As commented by Aaron Durbin, a separate `i82801gx_enable_acpi()` is not needed: “The existing code path *in this file* is about enabling the io apic.” [1]. [1] http://review.coreboot.org/#/c/3182/4/src/southbridge/intel/lynxpoint/lpc.c Change-Id: I104a2d9c2898da14d26f8f2992d5a065ad640356 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3181 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-07x86 I/O APIC: Dump I/O APIC regs in `ioapic.c`Paul Menzel
Some southbridges have code in their `lpc.c` files to dump the I/O APIC registers. printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; printk(BIOS_SPEW, " 0x%08x\n", reg32); } Add similar code to `src/arch/x86/lib/ioapic.c` so all boards using the function `set_ioapic_id()` get the debug feature and the other boards can be more easily adapted in follow-up patches. Change-Id: Ic59c4c2213ed97bdf3798b3dc6e7cecc30e135d8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3184 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-05-07x86 I/O APIC: Make functions `io_apic_{read,write}()` publicPaul Menzel
Some LPC initialiation can save some lines of code when being able to use the functions `io_apic_read()` and `io_apic_write()`. As these two functions are now public, remove them from the generic driver as otherwise we get a build errors like the following. […] Building roda/rk9; i386: ok, using i386-elf-gcc Using payload /srv/jenkins/payloads/seabios/bios.bin.elf Creating config file... (blobs, ccache) ok; Compiling image on 4 cpus in parallel .. FAILED after 12s! Log excerpt: coreboot-builds/roda_rk9/arch/x86/lib/ramstage.o: In function `io_apic_write': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/arch/x86/lib/ioapic.c:32: multiple definition of `io_apic_write' coreboot-builds/roda_rk9/drivers/generic/ioapic/ramstage.o:/srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/drivers/generic/ioapic/ioapic.c:22: first defined here collect2: error: ld returned 1 exit status make: *** [coreboot-builds/roda_rk9/generated/coreboot_ram.o] Error 1 make: *** Waiting for unfinished jobs.... […] Change-Id: Id600007573ff011576967339cc66e6c883a2ed5a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3180 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-07boot state: remove drain timers optionAaron Durbin
Internally there were states that had an attribute to indicate that the timers needed to be drained. Now that there is a way to block state transitions rely on this ability instead of draining timers. The timers will drain themselves when a state is blocked. Change-Id: I59be9a71b2fd5a17310854d2f91c2a8957aafc28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3205 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-07boot state: add ability to block state transitionsAaron Durbin
In order to properly sequence the boot state machine it's important that outside code can block the transition from one state to the next. When timers are not involved there's no reason for any of the existing code to block a state transition. However, if there is a timer callback that needs to complete by a certain point in the boot sequence it is necessary to place a block for the given state. To that end, 4 new functions are added to provide the API for blocking a state. 1. boot_state_block(boot_state_t state, boot_state_sequence_t seq); 2. boot_state_unblock(boot_state_t state, boot_state_sequence_t seq); 3. boot_state_current_block(void); 4. boot_state_current_unblock(void); Change-Id: Ieb37050ff652fd85a6b1e0e2f81a1a2807bab8e0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3204 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-07haswell: use asmlinkage for assembly-called funcsAaron Durbin
When the haswell MP/SMM code was developed it was using a coreboot repository that did not contain the asmlinkage macro. Now that the asmlinkage macro exists use it. BUG=None BRANCH=None TEST=Built and booted. Change-Id: I662f1b16d1777263b96a427334fff8f98a407755 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3203 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-07exynos5: select HAVE_MONOTONIC_TIMERDavid Hendricks
We have the monotonic timer implemented on exynos now, and this also enables helpful bootstage prints with timing info. Change-Id: I3baa4c9d70d4b4d059abd5e05eddcabd5258dbfd Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3210 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-07x86: add TSC_CONSTANT_RATE optionAaron Durbin
Some boards use the local apic for udelay(), but they also provide their own implementation of udelay() for SMM. The reason for using the local apic for udelay() in ramstage is to not have to pay the penalty of calibrating the TSC frequency. Therefore provide a TSC_CONSTANT_RATE option to indicate that TSC calibration is not needed. Instead rely on the presence of a tsc_freq_mhz() function provided by the cpu/board. Additionally, assume that if TSC_CONSTANT_RATE is selected the udelay() function in SMM will be the tsc. Change-Id: I1629c2fbe3431772b4e80495160584fb6f599e9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3168 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-07haswell: use tsc for udelay()Aaron Durbin
Instead of using the local apic timer for udelay() use the tsc. That way SMM, romstage, and ramstage all use the same delay functionality. Change-Id: I024de5af01eb5de09318e13d0428ee98c132f594 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3169 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-07asrock/e350m1: reduce default stack sizeStefan Reinauer
The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes Removing the Kconfig variable STACK_SIZE to use the default results in the following numbers of stack usage. $ grep stack coreboot_with_patch.log CPU1: stack_base 00287000, stack_end 00287ff8 CPU1: stack: 00287000 - 00288000, lowest used address 00287da8, stack used: 600 bytes CPU0: stack: 00288000 - 00289000, lowest used address 0028875c, stack used: 2212 bytes [1] http://review.coreboot.org/#/c/3154/ (comment May 2 10:21 AM) Change-Id: Ibdb2102c86094fce3787e3b5a162ca8423de205c Signed-off-by: Stefan Reinauer <reinauer@google.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3209 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-06libpayload: make searching for a file less verboseAaron Durbin
The cbfs core code would print out all unmatched file names when searching for a file. This contributes to a lot of unnecessary messages in the boot log. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: I34c747e0d3406351318abf70994dbc0bb3fa6c01 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3164 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2013-05-06exynos5250/snow: deprecate time.hDavid Hendricks
This re-introduces 2fde966 (http://review.coreboot.org/#/c/3177/) which was reverted due to unsatisfied dependencies. time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Change-Id: I8e60105629d9da68ed622e89209b3ef6c8e2445b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-05timer.h: add mono_time_diff_microseconds()David Hendricks
The current way to get a simple mono_time difference is: 1. Declare a rela_time struct 2. Assign it the value of mono_time_diff(t1, t2) 3. Get microseconds from it using rela_time_in_microseconds(). This patch adds a simpler method. Now one only needs to call mono_time_diff_microseconds(t1, t2) to obtain the same value which is produced from the above three steps. Change-Id: Ibfc9cd211e48e8e60a0a7703bff09cee3250e88b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3190 Tested-by: build bot (Jenkins)
2013-05-05exynos5/5250: Update timer call sites to use monotonic timer APIDavid Hendricks
This goes thru various call sites where we used timer_us() and updates them to use the new monotonic timer API. udelay() changed substantially and now gracefully handles wraparound. Change-Id: Ie2cc86a4125cf0de12837fd7d337a11aed25715c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3176 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-05-04Lenovo ThinkPad X60: Clean up `romstage.c`Paul Menzel
1. Move comment for console init to correct place. 2. Start output with capital letter and add full stop at the end. 3. Add missing »)« at the end of description of GPIO 10. 4. Use tabulators instead of spaces. 5. Indent the code automatically using GNU indent [1] with the `-sc` switch adding stars in front of comment blocks as the good indent manual documents. $ indent -linux -sc src/mainboard/lenovo/x60/romstage.c Leave the numbers left aligned as it is more beneficial to be able to run indent without adapting the result afterward. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I2fa018ec28ff19d23d68754b565c13a7d7a57355 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3185 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-04Revert "exynos5250/snow: deprecate time.h"David Hendricks
This reverts commit 2fde9668b47e74d1bfad2f1688a4481e6b966d04 Somehow this got merged before its dependencies. 3190 must be merged first, followed by 3176. However 3190 will fail while this patch is in. So the situation can't correct itself. Reverting this until the other two go in. Change-Id: I176f37c12711849c96f1889eacad38c00a8142c4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3195 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-04Asus F2A85-M Enable the SD controller for F2A85-MRudolf Marek
If the SD controller is "off" hudson.c won't disable that because, there is no code for this yet. The PCI device is still visible and PCI BAR will be allocated by Linux. Unfortunately it may happen that the particular address is used by non-standard BAR for SPI controller. Change-Id: Ied7c581727541e2c81b0b1c2b70fd32de0014730 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3167 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-04AMD F15: Fix warning in Proc/CPU/FeatureMartin Roth
Fix Warning: cpuFeatureLeveling.c:265, GNU Compiler 4 (gcc), Priority: Normal cast to pointer from integer of different size [-Wint-to-pointer-cast] with an intermediate cast to (intptr_t) Change-Id: I3bfd2ea1e797632316675338789dabef8f73ba64 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-04AMD F15: Fix warnings in Proc/CommonMartin Roth
This fixes 3 warnings in the Proc/Common directory: AmdS3Save.c:250, GNU Compiler 4 (gcc), Priority: Normal AmdS3LateRestore.c:123, GNU Compiler 4 (gcc), Priority: Normal cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixed with a second cast to (intptr_t) AmdInitReset.c:153, GNU Compiler 4 (gcc), Priority: Normal statement with no effect [-Wunused-value] Fixed by commenting the line out as it is in the other families code. Change-Id: Ib35ec466671712af01568b7c2a18ee138fe883c0 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3125 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-04nvramtool: Use CMOS_SIZE for cmos sizePatrick Georgi
We write CMOS data to 128 byte files, which is a problem when using them later-on (eg. as part of a coreboot image) where nvramtool assumes them to be 256 byte, and so data corruption occurs. Change-Id: Ibc919c95f6d522866b21fd313ceb023e73d09fb9 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3186 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-03exynos5250/snow: deprecate time.hDavid Hendricks
time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I14ebf75649d101491252c9aafea12f73ccf446b5 Reviewed-on: http://review.coreboot.org/3177 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03crossgcc: update to gcc 4.7.3Idwer Vollering
Update crossgcc to use gcc 4.7.3 The resulting coreboot.rom is not runtime tested (any volunteers?). Drop the texinfo patch, rename the armv7a patch. Some Linux distributions have moved on to gcc 4.8, under certain circumstances this version can't (cross-)compile gcc 4.7.2 Bug report: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=56927 Change-Id: Id8ce5f86c34e1a0900d44dc6ae4e81cb9548ecc2 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/3112 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03cpu/amd/agesa/family15tn/Kconfig: Remove unneeded `UDELAY_LAPIC`Paul Menzel
Commit commit 825c78b5da98c7155ff6be3322cdaae0e5a060e8 Author: David Hubbard <david.c.hubbard+coreboot@gmail.com> Date: Thu May 2 18:06:03 2013 -0600 mainboard/{asus/f2a85-m,amd/thatcher}: move UDELAY_LAPIC Reviewed-on: http://review.coreboot.org/3178 adds `UDELAY_LAPIC` to `cpu/amd/agesa/family15tn/Kconfig`. This is not needed, because since commit commit e135ac5a7ea69b6edcb89345019212f5de412b1e Author: Patrick Georgi <patrick.georgi@secunet.com> Date: Tue Nov 20 11:53:47 2012 +0100 Remove AMD special case for LAPIC based udelay() Reviewed-on: http://review.coreboot.org/1618 `select UDELAY_LAPIC` is present in `src/cpu/amd/agesa/Kconfig` which applies also to AMD Family 15tn. Therefore remove `select UDELAY_LAPIC` again from `cpu/amd/agesa/family15tn/Kconfig`. Change-Id: I98b783a97c4a1e45ecb29b776cb3d3877bad9c0f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3179 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-05-03exynos5250: monotonic timer implementation (using MCT)David Hendricks
This implements the new monotonic timer API using the global multi-core timer (MCT). Change-Id: Id56249ff5d3e0f85808f5754954c83c0bc75f1c1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3175 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-05-03AMD SATA: Correct »them implement« to »then implement« in commentsPaul Menzel
The following command was used to correct all occurences of this typo. $ git grep -l "them implem" | xargs sed -i 's/them implem/then implem/' Change-Id: Iebd4635867d67861aaf4d4d64ca8a67e87833f38 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3145 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-03Intel Lynx Point: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
Commit »haswell: Add initial support for Haswell platforms« (76c3700f) [1] used `1 << 25` to set the I/O APIC ID of 2. Instead using `2 << 24`, which is the same value, makes it clear, that the I/O APIC ID is 2. Commit »Intel Panther Point PCH: Use 2 << 24 to clarify that APIC ID is 2« (8c937c7e) [2] is used as a template. [1] http://review.coreboot.org/2616 [2] http://review.coreboot.org/3100 Change-Id: I28f9e90856157b4fdd9a1e781472cc4f51d25ece Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3123 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-03Kconfig: Capitalize CBMEM in description of `EARLY_CBMEM_INIT`Paul Menzel
Capitalizing CBMEM seems to be the official spelling as can be seen in the descriptions around the `EARLY_CBMEM_INIT` Kconfig option. Change-Id: I046a678c3b04ef7e681de46aa137cedc405d546f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3143 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-03cbfs: make searching for a file less verboseAaron Durbin
The cbfs core code would print out all unmatched file names when searching for a file. This contributes to a lot of unnecessary messages in the boot log. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: I1e46a4b21d80e5d2f9b511a163def7f5d4e0fb99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3131 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2013-05-03mainboard/{asus/f2a85-m,amd/thatcher}: move UDELAY_LAPICDavid Hubbard
Stefan Reinauer suggested 'select UDELAY_LAPIC' did not belong in f2a85-m/Kconfig. It got there via copy-paste from thatcher/Kconfig so this commit removes the 'select UDELAY_LAPIC' from both and puts it in cpu/amd/agesa/family15tn/Kconfig Since f2a85-m is the only Thatcher board coreboot supports right now, this should not break any other boards. Change-Id: I811b579c31f8d259a237d3a6724ad3b17f3a6c3e Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Reviewed-on: http://review.coreboot.org/3178 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-05-01armv7: invalidate TLB entries as they are added/modifiedDavid Hendricks
The old approach was to invalidate the entire TLB every time we set up a table entry. This worked because we didn't turn the MMU on until after we had set everything up. This patch uses the TLBIMVAA wrapper to invalidate each entry as it's added/modified. Change-Id: I27654a543a2015574d910e15d48b3d3845fdb6d1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3166 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01AMD Hudson A55E: Remove GEC firmware blob kconfig promptBruce Griffith
The "gigabit ethernet controller" (GEC) block was added to AMD Hudson A55E to integrate ethernet capabilities into an AMD southbridge. The GEC is designed to work with B50610 and B50610M gigabit PHY chips from Broadcom. These parts may not be generally available in small quantities for embedded development. The GEC block requires an opaque firmware blob to function. The GEC blob is controlled by AMD and Broadcom and is not available from coreboot.org. This change removes GEC support from AMD Parmer and AMD Thatcher mainboards since these boards do not have the Broadcom PHY. AMD has requested that the GEC be hidden for Hudson FCH since the PHY parts are not generally available. This Kconfig option can make it appear that this is a viable and supported way to add Ethernet to an embedded board. It is possible to use the Hudson GEC block with other PHYs, but this requires development of a custom GEC blob and a custom Ethernet driver. A custom GEC blob has been developed for a Micrel PHY, but there is no accompanying driver. Change-Id: I7a7bf4d41e453390ecf987c9c45ef2434fc1f1a3 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3127 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-01device tree: track init timesAaron Durbin
With the introduction of a monotonic timer it is possible to track the individual times of each device's init() call. Add this ability behind a HAVE_MONOTONIC_TIMER option. Example log messages: Root Device init 5 usecs CPU_CLUSTER: 0 init 66004 usecs PCI: 00:00.0 init 1020 usecs PCI: 00:02.0 init 456941 usecs PCI: 00:13.0 init 3 usecs PCI: 00:14.0 init 3 usecs PCI: 00:15.0 init 92 usecs PCI: 00:15.1 init 37 usecs PCI: 00:15.2 init 36 usecs PCI: 00:15.3 init 35 usecs PCI: 00:15.4 init 35 usecs PCI: 00:15.5 init 36 usecs PCI: 00:15.6 init 35 usecs PCI: 00:16.0 init 3666 usecs PCI: 00:17.0 init 63 usecs PCI: 00:1b.0 init 3 usecs PCI: 00:1c.0 init 89 usecs PCI: 00:1c.1 init 15 usecs PCI: 00:1c.2 init 15 usecs PCI: 00:1c.3 init 15 usecs PCI: 00:1c.4 init 15 usecs PCI: 00:1c.5 init 16 usecs PCI: 00:1d.0 init 4 usecs PCI: 00:1f.0 init 495 usecs PCI: 00:1f.2 init 29 usecs PCI: 00:1f.3 init 4 usecs PCI: 00:1f.6 init 4 usecs Change-Id: Ibe499848432c7ab20166ab10d6dfb07db03eab01 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3162 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01ARMV7: add a function to disable MMU entriesRonald G. Minnich
It is useful to be able to lock out certain address ranges, NULL being the most important example. void mmu_disable_range(unsigned long start_mb, unsigned long size_mb) will allow us to lock out selected virtual addresses on MiB boundaries. As in other ARM mmu functions, the addresses and quantities are in units of MiB. Change-Id: If516ce955ee2d12c5a409f25acbb5a4b424f699b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3160 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-01Google/Snow: Revise bootblock initialization.Hung-Te Lin
It's fine to always start timer even in suspend/resume mode, so we can move the timer_start() back to the very beginning of boot procedure. That provides more precise boot time information. With that timer change, the wake up state test procedure can be simplified. Verified by building and booting firmware image on Google/Snow successfully, and then suspend-resume without problem (suspend_stress_test). Change-Id: I0d739650dbff4eb3a75acbbf1e4356f2569b487d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3151 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01armv7: add wrapper for tlbimvaaDavid Hendricks
This adds an inline wrapper for the TLBIMVAA instruction (invalidate unified TLB by MVA, all address space identifiers). Change-Id: Ibcd289ecedaba8586ade26e36c177ff1fcaf91d3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3161 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01Google/Snow: Remove duplicated SPI1 initialization in bootblock.Hung-Te Lin
The firmware media source (SPI1) is already initialized by Exynos iROM. There is no need to do it again. Verified by building and booting Google/Snow successfully. Change-Id: I89390506aa825397c0d7e52ad7503f1cb808f7db Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01boot state: run timers on state entryAaron Durbin
When TIMER_QUEUE is configured on call the timer callbacks on entry into a state but before its entry callbacks. In addition provide a barrier to the following states so that timers are drained before proceeding. This allows for blocking state traversal for key components of boot. BS_OS_RESUME BS_WRITE_TABLES BS_PAYLOAD_LOAD BS_PAYLOAD_BOOT Future functionality consists of evaluating the timer callbacks within the device tree. One example is dev_initialize() as that seems state seems to take 90% of the boot time. The timer callbacks could then be ran in a more granular manner. Change-Id: Idb549ea17c5ec38eb57b4f6f366a1c2183f4a6dd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3159 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01coreboot: add timer queue implementationAaron Durbin
A timer queue provides the mechanism for calling functions in the future by way of a callback. It utilizes the MONOTONIC_TIMER to track time through the boot. The implementation is a min-heap for keeping track of the next-to-expire callback. Change-Id: Ia56bab8444cd6177b051752342f53b53d5f6afc1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01boot state: track times for each stateAaron Durbin
When the MONOTONIC_TIMER is available track the entry, run, and exit times for each state. It should be noted that the times for states that vector to OS or a payload do not have their times reported. Change-Id: I6af23fe011609e0b1e019f35ee40f1fbebd59c9d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3156 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01tsc: provide monotonic timerAaron Durbin
Implement the timer_monotonic_get() using the TSC. Change-Id: I5118da6fb9bccc75d2ce012317612e0ab20a2cac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3155 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01lapic: monotonic time implementationAaron Durbin
Implement the timer_monotonic_get() functionality based off of the local apic timer. Change-Id: I1aa1ff64d15a3056d6abd1372be13da682c5ee2e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3154 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01haswell: 24MHz monotonic time implementationAaron Durbin
Haswell ULT devices have a 24MHz package-level counter. Use this counter to provide a timer_monotonic_get() implementation. Change-Id: Ic79843fcbfbbb6462ee5ebd12b39502307750dbb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3153 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01coreboot: introduce monotonic timer APIAaron Durbin
The notion of a monotonic timer is introduced. Along with it are helper functions and other types for comparing times. This is just the framework where it is the responsibility of the chipset/board to provide the implementation of timer_monotonic_get(). The reason structs are used instead of native types is to allow for future changes to the data structure without chaning all the call sites. Change-Id: Ie56b9ab9dedb0da69dea86ef87ca744004eb1ae3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3152 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01boot state: rebalance payload load vs actual bootAaron Durbin
The notion of loading a payload in the current boot state machine isn't actually loading the payload. The reason is that cbfs is just walked to find the payload. The actual loading and booting were occuring in selfboot(). Change this balance so that loading occurs in one function and actual booting happens in another. This allows for ample opportunity to delay work until just before booting. Change-Id: Ic91ed6050fc5d8bb90c8c33a44eea3b1ec84e32d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01x86: use boot state callbacks to disable rom cacheAaron Durbin
On x86 systems there is a concept of cachings the ROM. However, the typical policy is that the boot cpu is the only one with it enabled. In order to ensure the MTRRs are the same across cores the rom cache needs to be disabled prior to OS resume or boot handoff. Therefore, utilize the boot state callbacks to schedule the disabling of the ROM cache at the ramstage exit points. Change-Id: I4da5886d9f1cf4c6af2f09bb909f0d0f0faa4e62 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3138 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01boot: remove cbmem_post_handling()Aaron Durbin
The cbmem_post_handling() function was implemented by 2 chipsets in order to save memory configuration in flash. Convert both of these chipsets to use the boot state machine callbacks to perform the saving of the memory configuration. Change-Id: I697e5c946281b85a71d8533437802d7913135af3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3137 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01cbmem: use boot state machineAaron Durbin
There were previously 2 functions, init_cbmem_pre_device() and init_cbmem_post_device(), where the 2 cbmem implementations implemented one or the other. These 2 functions are no longer needed to be called in the boot flow once the boot state callbacks are utilized. Change-Id: Ida71f1187bdcc640ae600705ddb3517e1410a80d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3136 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01coverage: use boot state callbacksAaron Durbin
Utilize the static boot state callback scheduling to initialize and tear down the coverage infrastructure at the appropriate points. The coverage initialization is performed at BS_PRE_DEVICE which is the earliest point a callback can be called. The tear down occurs at the 2 exit points of ramstage: OS resume and payload boot. Change-Id: Ie5ee51268e1f473f98fa517710a266e38dc01b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3135 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 18:06:46 +0000