| Age | Commit message (Expand) | Author |
|---|
| 2008-02-25 | This patch adds automatic fan control for the CPU fan on the m57sli | Ronald Hoogenboom |
| 2008-02-25 | This trivial patch removes an unused local variable, thus getting rid of | Ronald Hoogenboom |
| 2008-02-21 | The proprietary VGA rom is only 36K on Tyan s2882, not 48K. | Ward Vandewege |
| 2008-02-21 | Add support for the Via CN700 with a C7 CPU and DDR2 RAM. Only a single DIMM is | Corey Osgood |
| 2008-02-20 | Route device IRQ through PCI bridge instead in mptable. | Yinghai Lu |
| 2008-02-20 | Initial support for MSI MS-7135 (K8N Neo3) mainboard. | Jonathan A. Kollasch |
| 2008-02-20 | flashrom: Add board_enable for Artec Group DBE61 and DBE62 | Mart Raudsepp |
| 2008-02-19 | I'm attaching the patch which should fix both problems. Fix the | Rudolf Marek |
| 2008-02-18 | Should be part of changeset 3106. | Rudolf Marek |
| 2008-02-18 | Attached patch fixes two typos in the sio_setup routine (comment + wrong exitLDN | Rudolf Marek |
| 2008-02-18 | This patch introduces virtual LDNs changes for W83627EHF driver. Not only LDN... | Rudolf Marek |
| 2008-02-18 | Use virtual LDNs. It enables the GPIOs correctly (it preserves the GPIO5/2 fr... | Rudolf Marek |
| 2008-02-18 | Some SIO/PNP devices are abusing register 0x30 for multiple LDN enables, like | Rudolf Marek |
| 2008-02-15 | Importing mkelfimage from | Stefan Reinauer |
| 2008-02-14 | With this small change it is possible to build flashrom again when | Clark Rawlins |
| 2008-02-11 | flashrom: further cleanups to enable_flash_cs5536 | Mart Raudsepp |
| 2008-02-09 | add $(CROSS_COMPILE) to ar calls. | Marc Jones |
| 2008-02-09 | Flashrom: Add board enable for VIA EPIA SP. | Luc Verhaegen |
| 2008-02-08 | Improve error handling and make RCONF_DEFAULT_MSR address be a constant. | Mart Raudsepp |
| 2008-02-08 | This implements support for devices using AMD Geode companion chip | Mart Raudsepp |
| 2008-02-07 | Change payload location in 'normal' - this was missed in r3992 and thus break... | Ward Vandewege |
| 2008-02-07 | This is a trivial patch. I missed one of the ROM names when I converted them... | Myles Watson |
| 2008-02-07 | Make the check for -fno-stack-protector fail silently, if it fails. | Ward Vandewege |
| 2008-02-07 | Change references to qemu in Coreboot-v2 calls to qemu-x86. | Myles Watson |
| 2008-02-06 | This patch changes the Config.lb files and adds Config-lab.lb files for | Myles Watson |
| 2008-02-06 | Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like | Carl-Daniel Hailfinger |
| 2008-02-05 | This patch changes all rom names that aren't coreboot.rom in Config.lb files. | Myles Watson |
| 2008-02-05 | Factor out print_conf() from Geode LX mainboard directories. The | Carl-Daniel Hailfinger |
| 2008-02-01 | This patch fixes the decoding of the IO address range 0x0820->0x0827 into the | Florentin Demetrescu |
| 2008-02-01 | This patch reverses an erroneous change that sneaked in during r2972, and broke | Ward Vandewege |
| 2008-01-28 | v2: Fix Serengeti-Cheetah flags too | Jordan Crouse |
| 2008-01-28 | [V2]: Add CFLAGS to targets to suck in any passed in flags | Jordan Crouse |
| 2008-01-28 | Fix mptable util so the output will compile | Jon Dufresne |
| 2008-01-27 | Add support for the Abit BE6-II V2.0 board. | Uwe Hermann |
| 2008-01-27 | Make the vendor name optional in the -m flashrom parameter when there's only | Peter Stuge |
| 2008-01-27 | Add a new record type "console" for lbtable, and insert one record | Patrick Georgi |
| 2008-01-27 | Forgot to add Spansion S25FL016A to README, trivial. | Peter Stuge |
| 2008-01-26 | This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLA... | Ronald G. Minnich |
| 2008-01-26 | Correctly disable the ROM area Write Protect bit in the Geode LX. | Marc Jones |
| 2008-01-25 | bsh/ksh-clone and make(1)-syntax don't go well together | Patrick Georgi |
| 2008-01-25 | This patch adds a new record type for lbtable to provide information | Patrick Georgi |
| 2008-01-25 | Various small fixes and updates for lxbios (trivial). | Uwe Hermann |
| 2008-01-25 | Add ids and chip entry for Spansion S25FL016A to flashrom, tested, | Peter Stuge |
| 2008-01-22 | Use "--build-id=none" as linker flags if build-id is supported. | Marc Karasek |
| 2008-01-22 | Here is just a little and simple patch to get the MX25L3205D working. | Harald Gutmann |
| 2008-01-22 | Flashrom did not use the read function for verifying, it used direct memory | Carl-Daniel Hailfinger |
| 2008-01-22 | Make sure we delay writing the next byte long enough in SPI byte | Carl-Daniel Hailfinger |
| 2008-01-21 | Omitting the wait for SPI ready when there is no data to be read, e.g. | Ronald Hoogenboom |
| 2008-01-21 | This patch adds version information to flashrom. Because 'v' and 'V' | Bernhard Walle |
| 2008-01-20 | last try i hope. Building with a payload changes the result of the rom | Stefan Reinauer |
| 2008-01-20 | give it 2k more space for abuild. let's look into this anyways, but get rid of | Stefan Reinauer |
| 2008-01-19 | Add Bingxun Shi <bingxunshi@gmail.com> to the list of contributors (trivial). | Uwe Hermann |
| 2008-01-19 | Small superiotool fix to detect more Winbond W83627EHF chips. The | Uwe Hermann |
| 2008-01-19 | This patch is for winbond w83627DHG superio support in superiotool. | Bingxun Shi |
| 2008-01-19 | Support SPI flash chips bigger than 512 kByte sitting behind IT8716F | Ronald Hoogenboom |
| 2008-01-18 | Document the --list-supported option. Various small fixes (trivial). | Uwe Hermann |
| 2008-01-18 | Minor documentation improvements/fixes in the README and manpage (trivial). | Uwe Hermann |
| 2008-01-18 | rename linuxbios_* files in utils repository. | Stefan Reinauer |
| 2008-01-18 | rename linuxbios_* files, too. | Stefan Reinauer |
| 2008-01-18 | util/ renames | Stefan Reinauer |
| 2008-01-18 | rename linuxbios -> coreboot | Stefan Reinauer |
| 2008-01-18 | for some reasons the externals did not get committed. | Stefan Reinauer |
| 2008-01-18 | Rename almost all occurences of LinuxBIOS to coreboot. | Stefan Reinauer |
| 2008-01-18 | Please bear with me - another rename checkin. This qualifies as trivial, no | Stefan Reinauer |
| 2008-01-16 | rename linuxbios to coreboot | Stefan Reinauer |
| 2008-01-15 | Add new --list-supported switch for printing the list of Super I/Os | Robinson P. Tryon |
| 2008-01-12 | Fix the documentation of GPIO setup, tell W83627EHF to use external | Rudolf Marek |
| 2008-01-12 | Via C3 datasheets don't make any mention of microcode updates, and the | Corey Osgood |
| 2008-01-11 | Fix these to use a more standard relative path for payload. | Ronald G. Minnich |
| 2008-01-11 | Add the ability to extend CFLAGS as needed for several new distros | Ronald G. Minnich |
| 2008-01-11 | This patch removes '\n' from the help output since this looks a bit strange. | Bernhard Walle |
| 2008-01-10 | Add a workaround for a bug in some binutils version which strictly | Carl-Daniel Hailfinger |
| 2008-01-10 | This patch introduces 4k CAR size granularity for the AMD x86 CAR code. | Carl-Daniel Hailfinger |
| 2008-01-10 | Enable MX25L8005 support in flashrom. The #defines were already there. | Harald Gutmann |
| 2008-01-09 | Use macros to improve readability of the device-to-pin IRQ assignments | Carl-Daniel Hailfinger |
| 2008-01-08 | Fix compilation of Tyan S2735 which was broken by accident in r3038. | Carl-Daniel Hailfinger |
| 2008-01-08 | Remove some DOS line endings accidentially introduced in r3014. | Carl-Daniel Hailfinger |
| 2008-01-08 | This patch is an attempt at introducing 4k CAR size granularity for the | Carl-Daniel Hailfinger |
| 2008-01-08 | Ubuntu's gcc doesn't write "install:" in german locales. | Patrick Georgi |
| 2008-01-07 | Add support for the SST25VF040B 4 Mbit SPI flash chip. | Carl-Daniel Hailfinger |
| 2008-01-07 | Improve readability and remove redundancy by wrapping | Torsten Duwe |
| 2008-01-06 | Since a VGA console and the need to run any option ROMs are | Torsten Duwe |
| 2008-01-04 | Add board enable for the gigabyte ga_2761gxdk board | Ronald G. Minnich |
| 2008-01-04 | Print at least the vendor for SPI flash chips if the exact chip ID is | Carl-Daniel Hailfinger |
| 2007-12-31 | Unfortunately, EN29F002T, EN29F002AT, EN29F002ANT, EN29F002NT all have | Carl-Daniel Hailfinger |
| 2007-12-31 | Add continuation ID support to jedec.c | Carl-Daniel Hailfinger |
| 2007-12-31 | This fixes a few vendor IDs to conform with JEDEC publication 106W | Carl-Daniel Hailfinger |
| 2007-12-30 | The following mainboards had a file named microcode_updates.c in their | Carl-Daniel Hailfinger |
| 2007-12-29 | All SPI chips mentioned in flashchips.c had their sector size listed as | Carl-Daniel Hailfinger |
| 2007-12-29 | Print the chip status register for all SPI chips on probe if verbose | Carl-Daniel Hailfinger |
| 2007-12-29 | Add 25VF016B support to flashrom. Untested, but verified against the | Carl-Daniel Hailfinger |
| 2007-12-28 | Add Intel 3100 integrated northbridge/southbridge/superio PCI IDs. | Ed Swierk |
| 2007-12-21 | Add an interrupt entry for the onboard firewire controller, | Torsten Duwe |
| 2007-12-21 | Change default payload to /tmp/filo.elf (trivial). | Uwe Hermann |
| 2007-12-19 | More abuild fixes, this should be the last (trivial) | Corey Osgood |
| 2007-12-19 | Fix for newer iasl versions (trivial) | Corey Osgood |
| 2007-12-19 | trivial fix for abuild. | Stefan Reinauer |
| 2007-12-19 | Small fix to make the abuild happy, add ROM_SIZE to target/*/Config.lb, | Corey Osgood |
| 2007-12-19 | Changed the stop_this_cpu() to just hlt. | Marc Jones |
| 2007-12-19 | Initial AMD Serengeti_Cheetah_FAM10 platform for Barcelona support. | Marc Jones |
