summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-27intel/skylake: IRQ programming through UPDSubrata Banik
Implemented Device IRQ porgramming, PxRC to IRQ mapping, GPIO IRQ routing, SCI IRQ select through UPD BUG=NONE BRANCH=NONE CQ-DEPEND=CL:*232948 TEST= build and booted sklrvp,kunimitsu with this changes. Change-Id: Ic98074491fe5251a48ed55b6fb7ef31809c3abf3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 534bd65e5df8654d745c8efe491a332336c9cdc3 Original-Change-Id: I4ea6f3cdb15d371c6023bfd046f3475290f5aa26 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291403 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12146 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/kunimitsu: USB Phy settings and Skip UART2 init in FSPRizwan Qureshi
FSP 1.7.0 provides UPD to configure USB phy settings update the same for kunimitsu. FSP 1.7.0 also provides UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684,chrome-os-partner:41374,chrome-os-partner:42284 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:303661 Change-Id: Ie0a545c954f472cc822b63786d40399ec93d5166 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 90296e04942c70d972c225fc75dfab6de44d10ed Original-Change-Id: If79e81ef3323e782e96db307d89a01c14174b435 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304032 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12145 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/skylake: FSP 1.7.0 MemoryInit/SiliconInit params updateRizwan Qureshi
In FSP 1.7.0 SataMode and SataEnable have been moved from MemoryInit to SiliconInit. Also, GpioTablePtr has been removed. USB phy settings added to SiliconInit, Enable the configs for USB equalization settings in coreboot. Addition of serialIO UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684, chrome-os-partner:42284, chrome-os-partner:41374 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:*232947, CL:*232946, CL:*232948, CL:*232949 Change-Id: I2e8e6e32fc7074774ddcf1fb4c270bb56372b7df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 623c5a52f3afedaf2c0bfe7361cfd627d093cb73 Original-Change-Id: I8b3be2c49893c564fe2197aa32bde6323bf425e9 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303661 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12144 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/kunimitsu Fab3: Strengthening Rcomp target CTRL valuepchandri
This patch strengthens the Rcomp Target CTRL by 10% for 8GB memory part K4E6E304EE-EGCF as with the current values the MRC training is failing due to more load on CS# BRANCH=None BUG=chrome-os-partner:44647 TEST=BUilds and boots on Kunimitsu. Change-Id: I478002bbebabaac418356d4b5b4755bb56009268 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b208659e690d8cb5b8dcaf30eed53c01b9f77f6d Original-Change-Id: Ia0a0c1358649af77a3a0d301cb791f26f1e039bf Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304103 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Reviewed-on: http://review.coreboot.org/12143 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/skylake: Add support for Gfx PEIM (AKA GOP)robbie zhang
This patch implements the igd_opregion using the write_acpi_tables mechanism to support GOP usage. BRANCH=none BUG=chrome-os-partner:44559 TEST=W/o GOP_SUPPORT in config, Built and boot on kunimitsu/glados. W/ GOP_SUPPORT enabled, build and boot on kunimitsu/glados, but on glados Dev screen can not be seen (OS display is fine). CQ-DEPEND=CL:303539 Change-Id: I4cd63dfe0d3f456c5f084e38db976425143f79e7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4db57463a69c6114b1e2ed4035d378ee3a82783f Original-Change-Id: I6f3c29c1b608eeaad8f2bf79d17394d49f8e412c Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303387 Original-Commit-Ready: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12142 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27fsp/intel common: Add support for Gfx PEIM (AKA GOP)robbie zhang
This patch provides the lb_framebuffer() for coreboot table with fsp gop usage, add Igd Opregion register defines, and update the UPD naming following fsp. BRANCH=none BUG=chrome-os-partner:44559 TEST=Built and boot on kunimitsu/glados. Change-Id: I9cf9d991eb09d698e7a78323cd855c4c99b55eca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cd6834057cca60716bc0e24cfc2cd60fed02be7a Original-Change-Id: I64987e393c39a7cc1084edf59e7ca51b8c5ea743 Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303539 Original-Commit-Ready: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27coreboot: make lb_framebuffer a weak functionrobbie zhang
This is to support other gfx enable method such as Gfx Peim (AKA GOP) for Intel soc. BRANCH=none BUG=chrome-os-partner:44559 TEST=Built and boot on kunimitsu/glados. Change-Id: Ib8010ea6901ea906a8b4129807b94ace71ef1165 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ad26a99560009c487070cccf6ab132188b9e247d Original-Change-Id: Id132718a8bcec5446cc4c0d9d636d26e8a99bb15 Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303801 Original-Commit-Ready: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27cpu/amd/car: Add initial Suspend to RAM (S3) supportTimothy Pearson
Romstage handoff copied from cpu/intel/haswell/romstage.c Change-Id: I1e1a67fa3c2c13cebcf8f0af318055b9d97d0a59 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11953 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27libpayload: usb: Retry get_descriptor() on failureShawn Nematbakhsh
Certain Lexar USB disks may fail during the first calls to get_descriptor(..., DT_CFG, ...) for unknown reasons. Therefore, make several attempts before giving up. BUG=chromium:466758 TEST=Manual on Samus. Go to recovery mode, verify that Lexar LJDS70 USB stick is bootable. BRANCH=None Change-Id: I476ac22f9c4f844c60ebc6e53af8c144d70bb9d4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93a0570b343479dd22506ad4d7961f0ea4251f8c Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: Ie581c7c71c53816065c7f59202581888a79e445e Original-Reviewed-on: https://chromium-review.googlesource.com/302403 Original-Commit-Ready: Shawn N <shawnn@chromium.org> Original-Tested-by: Shawn N <shawnn@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12133 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27cpu: create an empty file when no microcode files are givenAlexander Couzens
Having an empty microcode file makes it more easy to debug in comparison to a not existing file in cbfs. There are some platforms (e.g. ep80579) which support microcode updates but not having any microcode updates yet in our tree. These platform hang the build because `cat` is called with no parameters. Change-Id: I2699bde0c62ae62ca888686f8b496e845c36d970 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/12109 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-27Makefile: Fix dependency tracking for linker scriptsJulius Werner
When the memlayout framework was initially developed in the Chromium OS tree, the accompanying build system changes unified handling for all file types (including .ld and .asl) in a single template. This had the advantage that compiler invocation options pertaining to the build system itself could be centralized in a single place. On upstreaming this was reverted for some reason, keeping the old special handling for ASL files and writing a custom template for LD. The duplicated compiler invocation code for the latter was missing the -MMD flag required for dependency tracking. It was also missing at least one $-sign which causes the $(<class>-ld-ccopts) variable to be evaluated at the time it's parsing the template generator (before the subdirectory pass). This should not cause any issues with current code, but all the ccopts variables were meant to be evaluated after the subdirectory pass (so things like archs and SoCs can manipulate them if needed), so this patch fixes both issues. BRANCH=None BUG=None TEST='make; touch src/soc/.../memlayout.ld; make' re-links all stages and includes the changed symbol addresses from the new address map. Change-Id: I4be458112908380268229b3220cfa0062add5c5d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e8a36f994ef6a819ded7bf6b39b1e0fce8e52279 Original-Change-Id: If2310b46b53d888975cb2113edce20a896be39ef Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/303054 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12139 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-27asus/f2a85-m: Activate IOMMU supportRudolf Marek
Activate the IOMMU support for the Asus F2A85-M. Add the device to `devicetree.cb`. $ lspci -s 0.2 […] 00:00.2 IOMMU: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit $ dmesg […] [ 0.000000] ACPI: IVRS 00000000bf144e10 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000bf144e80 0051F (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: SSDT 00000000bf1453a0 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000bf145a52 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A) […] Linux 3.10 reported several IO page faults, which could never be explained and which the vendor firmware did not. These errors couldn’t be reproduced with Linux 3.18 by Damien Zammit. Change-Id: I0aa530be17d31656e65db6113343f2ea7008b843 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3517 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27northbridge/amd/amdfam10: Limit maximum RAM clock to BKDG recommendationsTimothy Pearson
Change-Id: I45eb03a4b351e458e8448245896743bd6fa57637 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11943 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-26northbridge/amd/amdmct: Fix broken AMD K10 DDR3 memory initalizationTimothy Pearson
The native AMD DDR3 memory initialization code was riddled with numerous errors and was missing critical configuration code segments; this made it so that DDR3 memory did not function on most AMD boards. This patch corrects enough of the DDR3 initialization such that UDIMMs can be used on most channels of G34 Opteron boards. Further work is needed to fix the broken RDIMM code and remaining UDIMM issues. Change-Id: Iab690db769e820600693ad1170085623b177b94e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11941 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-26southbridge/amd/sr5650: Add AMD Family 15h CPU supportTimothy Pearson
Change-Id: I88203907270db1a268bd377151f15c24fca1efdc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25vgabios: fix compilation after x86emu changesStefan Reinauer
This utility links in coreboot code, and has been broken for a while again after removing some hacks from coreboot. I hadn't realized how bad it was broken last time, and since most of this stuff is still in a pretty bad shape, I decided to throw all of the changes together. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: If3e4399b1b0e947433b97caa29962ef66ea2993d Reviewed-on: http://review.coreboot.org/11736 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25AMD Family 0Fh: ensure CONFIG_CBB and CONFIG_CDB have sane valuesJonathan A. Kollasch
(this probably fixes relocate_sb_ht_chain() on tyan/s2885) Change-Id: I5a26f4280b00bfb259c600048f6a7391a6c1268f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10913 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-10-25cbfstool: have decompress functions provide ouput data sizeAaron Durbin
Currently cbfs stage files that are compressed do not have the decompressed size readily available. Therefore there's no good way to know actual size of data after it is decompressed. Optionally return the decompressed data size if requested. Change-Id: If371753d28d0ff512118d8bc06fdd48f4a0aeae7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12173 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25cbfstool: initialize offset field in buffer_init()Aaron Durbin
If one wants to use buffer_init() for initializing a struct buffer all the fields should be initialized. Change-Id: I791c90a406301d662fd333c5b65b2e35c934d0f7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12172 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25Add support for the Silicon Image "Ultra ATA-133 Host Controller"Denis 'GNUtoo' Carikli
This patch was tested with the following card: IDE interface: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller [1095:0680] (rev 02) Change-Id: I988b73684b54942d8ee6e44a9319dcc54086fca7 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/12171 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25intel/kunimitsu: Add chromeos to verstageLee Leahy
In order to build stand alone verstage the chromeos.c file needs to be part of the verstage target. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Change-Id: I9c547ae177dc95030c8c545a302a2349bf1c9cf8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07b6465f0b3e18d30647959b8e1db44d8647cf90 Original-Change-Id: I49bf7f1bd2edb32ffe9cc22f6fce1348434fd234 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/301243 Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12152 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2015-10-25rockchip/rk3288: Remove 1392MHz option for RK3288 APLLDavid Hendricks
It's no longer used. BUG=none BRANCH=none TEST=it compiles Change-Id: I3d9385e0e1f14977c1632f3a8dda771c684ce458 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5381b6434996da10706dd358928f98703ac0892c Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Ib0cfaf1bb173a7150f7ff504b9f58a62eb82e781 Original-Reviewed-on: https://chromium-review.googlesource.com/302634 Reviewed-on: http://review.coreboot.org/12138 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-10-25google/veyron_rialto: Throttle to 1416MHz @ 1200mV in bootblockDavid Hendricks
The 1392MHz value used to throttle the RK3288 earlier was somewhat arbitrary. This patch brings the throttling in sync with the operating points specified in the Linux device tree for RK3288. BUG=chrome-os-partner:42054 BRANCH=none TEST=Saw print statement in image.serial.bin indicating that APLL was set to the desired frequency. Change-Id: Ibe570267bbfe23f010ad5e1ea651356291b9c63c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a146f23b13cb0f6da93ada65648cf33ecfaaa7d6 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I6bcdb5fd6ffa3f9a22e79c519bdb7980492e2318 Original-Reviewed-on: https://chromium-review.googlesource.com/302633 Reviewed-on: http://review.coreboot.org/12137 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-10-25rockchip/rk3288: Add 1416MHz as an option for RK3288 APLLDavid Hendricks
BUG=chrome-os-partner:42054 BRANCH=none TEST=tested with subsequent patch Change-Id: I92d67ff4b706c16677661ead1edd5c190ccc6d95 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dced0fcbc35457d7326d590948ce5fe098a5e735 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I7b29c647380046ac41a290b19fdfba186bcb2127 Original-Reviewed-on: https://chromium-review.googlesource.com/302632 Reviewed-on: http://review.coreboot.org/12136 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-10-25google/veyron_rialto: Reduce voltage and frequency in recovery modeDavid Hendricks
This applies CL:300617 to Rialto to down throttle further in recovery mode. BUG=chrome-os-partner:42054 BRANCH=none TEST=Saw print statment in recovery mode with image.serial.bin, device only got mildly warm after several minutes (not hot). Change-Id: I08b6024d31c83c6bbd8c8d9d9a07adc9835e81fd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 74eb9143fbe13df5f386185eab9e5ba9df27cadf Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I9e57d826750cb523c115332fa13a6143bcff7449 Original-Reviewed-on: https://chromium-review.googlesource.com/302631 Reviewed-on: http://review.coreboot.org/12135 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-10-25rockchip/rk3288: Add 600MHz as an option for RK3288 APLLDavid Hendricks
BUG=chrome-os-partner:41201 BRANCH=firmware-veyron TEST=tested with subsequent patch on mickey Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I7081d92be128f522e1a33eee6f3de9dfbbf042ea Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a390c927ad8ed035520c8a813db808715dc5e527 Original-Change-Id: I3ce0f7b2772c8c652b7f461749d01cc7b669b6cf Original-Reviewed-on: https://chromium-review.googlesource.com/300616 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/12134 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-10-25yabel: explicitly cast values to match printk expectationsStefan Reinauer
Change-Id: Id2230ecd800b138b6ccbbac318e71c9edf076c75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12116 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25yabel: Use IS_ENABLED where appropriateStefan Reinauer
Change-Id: Ib078b21ddf0493ad6795c6ab79125b3917ff7049 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12115 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25yabel: Don't cast pointer to u32Stefan Reinauer
Change-Id: I45b3412263507d92f443743d2ee63c9a8ef94795 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12114 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25Separate bootsplash image menuconfig option from othersKonstantin Aladyshev
The possibility of adding a bootsplash image to ROM should be independent from VGA_ROM_RUN and VESA menuconfig options. For example, the stored image could be saved in CBFS not for coreboot but for later use in SeaBIOS. Change-Id: I3a0ed53489c40d4d44bd4ebc358ae6667e6c797f Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/12129 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25southbridge/amd/sb700: Add option for last power state after failureTimothy Pearson
Change-Id: Ieb27bd51dfd45dd15d24a576865d38180a07444e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12175 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-25cpu/amd/car: Use standard integer types in post_cache_as_ram.cTimothy Pearson
Change-Id: I02c1fba5c749d5adb33ec86777bde108e587caa6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12185 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25southbridge/amd/sb700: Set up uninitialized devices in early bootTimothy Pearson
LPC decodes were not enabled, leading to a failure of POST 80 cards and similar debugging devices. Enable the relevant LPC decodes to allow debugging. Additionally, the SMBUS controllers were not properly set up. Enable both the primary and auxiliary controllers. Finally, K10 and higher CPUs were hanging during boot due to a misconfigued IOAPIC. Properly configure the IOAPIC. Change-Id: I9ffb6542ce445ac971fb81f4f554e7f1313e6a98 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12177 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-25northbridge/amd/amdfam10: Enable advanced PCIe setup optionsTimothy Pearson
TEST: Booted ASUS KGPE-D16 and verified device functionality. Change-Id: Ic6f5b3ca86eb55dc04291be0db67d06c34c6a6dc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12188 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25device/pciexp_device: Tune PCIe bridges before scanning childrenTimothy Pearson
Change-Id: Ieccafe8864d622c651e6a524e9898505ded15e54 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12187 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25device/pci_device: Set bridge primary bus number before scanningTimothy Pearson
Certain devices, such as the Intel 82575GB, contain multiple nested PCIe bridges (for example the PES12N3A). Coreboot does not set the primary bus number of the lower bridges, causing upstream forwarding failure. This in turn causes coreboot to fail to find the lowest devices (in this case the NICs), and as a result the required resources are not allocated and the NICs do not function. Change-Id: I4fd3aa21a04dbe89ac6a5995e7707af914d432b1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12186 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25cpu/amd/car: remove PRINTK_IN_CAR #define that was hardcoded to 1Timothy Pearson
Change-Id: I5139ee222a0dca7f8e62612a39d30cad7976b505 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12184 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24cpu/amd: Add initial support for AMD Socket G34 processorsTimothy Pearson
Change-Id: Iccd034f32c26513edd52ca3a11a30f61c362682d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11940 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-24util: add ectool, superiotool, and viatool to what-jenkins-doesMartin Roth
Change-Id: Ib39ec8acee8de5678e06792323920d44a75e0ada Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12122 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24util: update junit.xml targetMartin Roth
- Display what's happening to the console as well as logging to the junit.xml file. - Log the clean in the junit.xml file so if it fails it doesn't just appear to not have run the test. - Run both clean and distclean (if distclean exists and runs clean, this still only runs clean once) so that if distclean doesn't exist the clean still happens. Don't stop the build if the clean step fails in case there's no distclean in the util makefile. - Run the util builds multithreaded. This saves a couple of seconds and helps find dependency issues that might not be seen if building single-threaded. Change-Id: If895295c83faba98661b7c925b65fd436e06b834 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12121 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24util: Update makefiles for junit testingMartin Roth
- Have clean remove junit.xml files. - Remove junit.xml target from cbmem makefile - this is in the top level Makefile.inc now. - add distclean targets to makefiles. - Make sure all makefiles have .PHONY set up. - rm commands need -f or they will fail if the file they're trying to remove doesn't exist, causing the build to fail. Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24southbridge/amd/sr5650: Fix hardcoded printk() function names in pcie.cTimothy Pearson
Change-Id: Idf1db091f1d1e40ce2f248bc25d662cf9608b27e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12179 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Fix boot hang on ASUS KGPE-D16Timothy Pearson
Change-Id: I1d7d6715663a13ab94fd6d71808e35f0f7384d00 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11938 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700/acpi: Add IDE / SATA ASL codeTimothy Pearson
Change-Id: I507c93556dd66c3590c8ca11c06cd5b2dd7884c5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12176 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24drivers/aspeed: Add native text mode VGA support for the AST2050Timothy Pearson
Change-Id: I37763a59d2546cd0c0e57b31fdb7aa77c2c50bee Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11937 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Fix boot failure on ASUS KGPE-D16Timothy Pearson
Change-Id: Ia13ba58118a826e830a4dc6e2378b76110fcabad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11939 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24mainboard/asrock/e350m1: Update CMOS layout to match SIO changesTimothy Pearson
Change-Id: I3f1f33b50f788b6d57f1a7986c4bdb912426e4f0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12125 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24lib/stack: Add stack overrun detectionTimothy Pearson
Change-Id: I9a59fcb7cf221ae590a047c520e7aff99e23ecf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11962 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-24mainboard: Update mainboards using the w83795 sensor deviceTimothy Pearson
Update mainboards using the w83795 sensor device with sane default values. Note that in some cases the defaults may vary from the defaults provided by the old driver, for example the default fan speeds and control modes have changed as I do not have any information on the correct sensor to fan mappings for these boards. Change-Id: Id2ad6222d7a0f29483b022fa097d7d098c6b4122 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12124 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24drivers/i2c/w83795: Add option to use auxiliary SMBUS controllerTimothy Pearson
Change-Id: I5a9b5eba992853b84b0cb6c3a1764edf42ac49b2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24drivers/i2c/w83795: Add full support for core functionsTimothy Pearson
Add full support for fan control, fan monitoring, and voltage monitoring. Fan speeds and functions are configurable via each mainboard's devicetree.cb file. NOTE: This patch effectively rewrites large portions of the original driver. You may need to re-verify correct operation on your hardware if you were using the old driver code. Change-Id: I3e246af0e398d65ee43ea708060885c67fd7d202 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11936 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sr5650: Add optional delay after link trainingTimothy Pearson
Certain devices (such as the LSI SAS 2008 controller) do not respond to PCI probes immediately after link training. If it is known that such a device is likely to be installed allow the mainboard to insert an appropriate delay. Change-Id: Ibcd9426628cacd6f88e6e3fcbc2b3eb7e3a92081 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11991 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-24device/smbus: Avoid infinite loop if SMBUS device has wrong parentTimothy Pearson
If an SMBUS device in devicetree.cb is placed under a parent device that does not have an SMBUS controller, coreboot will enter an infinite loop and hang without printing any failure messages. Modify the loop to exit under these conditions, allowing the failure message to be printed. Change-Id: I4c615f3c5b3908178b8223cb6620c393bbfb4e7f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12131 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins)
2015-10-24intelvbttool: Add MakefilePaul Menzel
Add minimal Makefile based on cbmem’s Makefile. The make target `junit.xml` is removed as this is handled differently since commit de9adebb (Add junit.xml code to top Makefile.inc instead of utils). Also the `junit.xml` is removed in the make target `clean`. Additionally, the make target `distclean` is added, as the current junit.xml code in the top `Makefile.inc` requires that. Change-Id: I164b1f7733505bca6248d0711d7ad71d635fa926 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11876 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-10-24amd/agesa/hudson: Add support for hiding the USB1.1-only OHCITobias Diedrich
The hudson chipset has 4 USB controllers, the fourth is USB1.1-only and (presumably) not used very often, add support for hiding it: 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) USB1 (3.0, XHCI) 00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB2 (2.0, OHCI+EHCI) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB3 (2.0, OHCI+EHCI) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB4 (1.1, OHCI only) Change-Id: I804e7852fd0a6f870dd118b429473cb06ebac9a4 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7355 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/acpi: Clean up SMBus references.Tobias Diedrich
Replace the AMD SMBus section with the equivalent SB800 smbus.asl include or remove already commented-out sections. Verified by running the cpp preprocessor over the DSDTs and diffing the results against this patch. The only change is in src/mainboard/siemens/sitemp_g1p1/dsdt.asl, where someone added RADD and SADD to the OpRegion, but those are unused, so removing them is fine. Change-Id: I074c8a1ed1c9a944d4988752bd0fc42c199c766c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10618 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-23google/auron: Remove additional SPD file entriesMarc Jones
Auron only has three GPIOs for RAMID, so there is no need for sixteen SPD file entries. Only include 8 SPD entries. Change-Id: Icf83719a2a5b9271b29f48cde5c66c4c8ccd07f4 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12073 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23Intel: Move MCRS ResourceTemplate outside of _CRS methodMartin Roth
On Broadwell, this reduces the number of 'remarks' in the IASL build from 222 to 3. Fixes these remarks: Object is not referenced (Name is within method [_CRS]) The ACPI compiler is trying to be helpful in letting us know that we're not using various fields in the MCRS ResourceTemplate when we define it inside of the _CRS method. Since we're not intending to use those objects in the method, it shouldn't be an issue, but the warning is annoying and can mask real issues. Moving the creation of the MCRS object to outside of the CRS method and referencing it from there solves this problem. This change was made for fsp_baytrail in commit 2eaa0d49 fsp_baytrail: Fix ACPI 'Object is not referenced' warnings Change-Id: I67a1faf963d1868f4133c7747a43a511cd28a44b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11268 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23roda/rk9: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: Ifb434db1b8eb01acf48f26366c5237ae49a8730a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23lenovo/t400: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: Ide50b34184b80c86b996f86dd589c3cf3bf75587 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23lenovo/x200: Consolidate `acpi/platform.asl`Paul Menzel
The ASL code is already present in `southbridge/intel/common/acpi/platform.asl` and `cpu/intel/common/acpi/cpu.asl`. So include these files instead of duplicating the code. Something similar was don in commit commit 24813c14 (i945: Consolidate acpi/platform.asl). Change-Id: I1e69cf0fd73e70ed6656b9ed6f55aba4c56a6edd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11882 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23cpu/intel: Move Power notification ASL code into `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/cpu/intel/model_6dx/acpi`, although the devices can also use different Intel CPU models like, for example, `intel/model_6ex` on the Lenovo T60. Therefore move the file to the directory `src/cpu/intel/common/acpi` so that other devices, like Intel GM45 based devices, can also include it. Change-Id: I90126b66a4d70468923622a8e3aebadeafcbf96f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23intel/fsp_baytrail: Fix logging of ISPEnable optionDavid Imhoff
Before this fix the value of PcdEnableSdio was printed as the MIPI/ISP configuration option. TEST=Built and booted on Minnowboard Max Change-Id: Ia9b02d520f4e615f90b45935456b9d97c5d00f11 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-10-23asrock/e350m1: disable unconnected GPP PCIe clocksFelix Held
connections checked by desoldering the FCH and looking at the PCB this lowers the power consumption by about 150-200mW measured on primary side based on change #5397 Change-Id: I986c4cc73a247994f2a47fdfd03f585069ca9385 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/11866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-23cbfstool: Make sure fileno is available on CygwinStefan Reinauer
This patch fixes compilation of cbfstool on Cygwin. As reported in http://review.coreboot.org/#/c/10027 cbfstool on Cygwin likes to be compiled with -D_GNU_SOURCE. That patch was abandoned because it would unwantedly turn on more GNU extensions. Instead of doing that, only enable the define on Cygwin, switch to -std=gnu99 instead of -std=c99 to make fileno and strdup actually available. A MINGW32 check that was forgotten in Makefile was copied over from Makefile.inc to keep the two files in sync. This patch has no impact on non-Windows builds. Change-Id: I068b181d67daf9c7280110e64aefb634aa20c69b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11667 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-10-23SB800-mainboards: use write8 to disable unused GPP CLKFelix Held
don't use non-volatile pointers for MMIO access Change-Id: I9f38012a806e43f2535265f1d25537c59b53904e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/12081 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23superio/nuvoton/nct5572d: Enable power state after power failure supportTimothy Pearson
Change-Id: Ia0313b9ecd64c9e6f99a140772ebb35abe0175fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11950 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-23northbridge/amd/amdmct: Fix Family 15h detectionTimothy Pearson
Change-Id: I3623f8945bd62b7050ec609934f96543552c792b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12018 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-23southbridge/amd/sr5650: Fix GPP3a link training in higher width modesTimothy Pearson
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11990 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23device/hypertransport: Add additional debug outputTimothy Pearson
Change-Id: I94b870f47581a4a2591d02eeb37627666e0f4297 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11945 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-23cpu/amd/model_10xxx: Clean up debugging statementsTimothy Pearson
Change-Id: I6dff74b3857e1fb384aefc87b44e7679bd4aab07 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11948 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23northbridge/amd/amdmct/mct_ddr3: Fix curly brace style violationsTimothy Pearson
Change-Id: Ic27d404a7ed76b58043037e8b66097db6d664501 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11942 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23include/smbios: Update SMBIOS memory structures to version 2.8Timothy Pearson
Change-Id: Icda915933c4ebf3a735d9e1d4e4dbb1138a06b39 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11955 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-23intel/cougar_canyon2: fix buildPatrick Georgi
The reintroduction of cougar_canyon2 crossed beams with the moving the GMA display brightness data in ACPI into individual mainboards. Make things build again by having the board use the same default values that it used to use automatically. They may be wrong, but no worse than what was there before. Change-Id: Id788034c38b42e1c35d9cd17e9bbb2ce49e3e91c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12132 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-23MAINTAINERS: Add script to test database and find maintainersStefan Reinauer
This utility should make it easier to complete and maintain the database of coreboot subsystem maintainers (MAINTAINERS file) This will need a bit of tender love and care to print information in an easily machine readable output for the build system, but its a first start to query the maintainers database. Build with: $ go build util/scripts/maintainers.go Find a maintainer for a set of files with: $ ./maintainers Makefile Makefile.inc Makefile is in subsystem BUILD SYSTEM Maintainers: [Patrick Georgi <patrick@georgi-clan.de>] Makefile.inc is in subsystem BUILD SYSTEM Maintainers: [Patrick Georgi <patrick@georgi-clan.de>] Check the maintainer database with: $ ./maintainers .gitignore has no subsystem defined in MAINTAINERS .gitmodules has no subsystem defined in MAINTAINERS .gitreview has no subsystem defined in MAINTAINERS 3rdparty/arm-trusted-firmware has no subsystem defined in MAINTAINERS 3rdparty/blobs has no subsystem defined in MAINTAINERS 3rdparty/vboot has no subsystem defined in MAINTAINERS COPYING has no subsystem defined in MAINTAINERS Documentation/AMD-S3.txt has no subsystem defined in MAINTAINERS Documentation/CorebootBuildingGuide.tex has no subsystem defined in MAINTAINERS Documentation/Doxyfile.coreboot has no subsystem defined in MAINTAINERS [..] Change-Id: I49c43911971152b0e4d626ccdeb33c088e362695 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23northbridge/amd/amdfam10: Fix typo in commentTimothy Pearson
Change-Id: I0a9b3a66231052622c862bae32b900f52f6efba9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11944 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-23cbfstool: Fix tolower() calls on CygwinStefan Reinauer
Cygwin complains: cbfstool.c: 1075:5 error: array subscript has type 'char' [-Werror=char-subscripts] so add an explicit cast. Change-Id: Ie89153518d6af2bacce3f48fc7952fee17a688dd Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11666 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-22allocator: Page align memory mapped PCI resourcesNico Huber
To help hypervisors to assign PCI devices individually to virtualization guests, page align dynamically allocated MMIO resources. Tested with kontron/ktqm77 which has dynamically configured onboard devices on the root bus and secondary buses. Booted Linux and checked the configuration with `lspci -v`. Got the configuration through Muen's tools which are very picky about overlapping and alignment. Booted a Muen based system that uses many onboard devices. GMA, xHCI and one NIC (on a secondary bus) were verified to function properly. Change-Id: I2b7115070e1ccad64565feff025289732c3b5e66 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12111 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-22cbfstool/Makefile: Also rm fmd_(parser|scanner).[ch] in cleanNico Huber
Change-Id: I783aa4b2319aaedd57ce9a67ca935392a611298f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12127 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22cbfstool/Makefile: Drop unused, irritating definition of `obj`Nico Huber
Change-Id: Id8dda8a973dcf991ac494c2d50258d1b51e43c6a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22gma ACPI: Make brightness levels a per board settingNico Huber
Those are actually board specific. Keep the old value as defaults, though. The defaults are included by all affected boards. Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-22model_fxx/powernow: add dual core Socket F TDPsJonathan A. Kollasch
Values based on correlation of brand strings, brand numbers and the TDP listings on AMD's web site (Wikipedia for Athlon 64 FX-7x TDPs). Change-Id: I7e6d12d0b6cc4fefc3f84076234c62c40e08304c Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10926 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-10-22Revert "Remove sandybridge and ivybridge FSP code path"Martin Roth
Please don't remove chipsets and mainboards without discussion and input from the owners. Someone was asking about cougar canyon 2 just a couple of weeks ago - there's obviously still interest. This reverts commit fb50124d22014742b6990a95df87a7a828e891b6. Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/12128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22MAINTAINERS: Fix format for file entries (F:)Stefan Reinauer
According to the documentation further up in the file: F: drivers/net/ all files in and below drivers/net F: drivers/net/* all files in drivers/net, but not below F: */net/* all files in "any top level directory"/net Add trailing slashes to directory names. Change-Id: I7bfd2eb2528a75fb6af79a990acb89f5e4251383 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12118 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-20libpayload: Add ptrdiff_t typedefPatrick Georgi
vboot2 in payloads (eg depthcharge) needs it. Change-Id: I4e79ae29cc282c8680f21686befd35c4ff461b3a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11922 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-20Enable MULTIPLE_CBFS_INSTANCES on x86, tooPatrick Georgi
It works there, we want it, disable that restriction. Change-Id: Idc023775f0750c980c989bff10486550e4ad1374 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/12094 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-20Revert "coreboot_table: don't add CMOS checksum twice."Nico Huber
This reverts commit e6606518243d9beda31693d40493b5f7a1a3e2e0. After some discussion on IRC we decided to revert it as libpayload can only read the copy that was removed (and other users like nvramtool can only read the other copy). So we need both copies at this time. Signed-off-by: Nico Huber <nico.h@gmx.de> Change-Id: I6cf6b2a1523d771bb52f3d5720b1b16ed4b348db Reviewed-on: http://review.coreboot.org/11696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-19cbfstool: Fix typo in error messagePatrick Georgi
Change-Id: Iaee7e2c74fe9f63d4d4878278bd445af393942f4 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11920 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-19vendorcode/google: Deal with MULTIPLE_CBFS_INSTANCESPatrick Georgi
We need to special-case filling out the vboot structures when we use CBFS instead of vboot's custom indexed format, otherwise (due to the way the CBFS header looks), it will try to write several million entries. Change-Id: Ie1289d4a19060bac48089ff70e5cfc04a2de373f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11914 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-10-18Makefile.inc: Put every tool in `TOOLLIST` on separate linePaul Menzel
This way, commit differences will be easier to read. Also sort the list lexicographically. Change-Id: I4ce3ac9018a3fddf5e30d7c1ac0c57090fac1d3d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12084 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-17armv7: Word-sized/half-word-sized memory operations for 32/16 bit read/writePaul Kocialkowski
Some registers only allow word-sized or half-word-sized operations and will cause a data fault when accessed with byte-sized operations. However, the compiler may or may not break such an operation into smaller (byte-sized) chunks. Thus, we need to reliably perform word-sized operations for 32 bit read/write and half-word-sized operations for 16 bit read/write. This is particularly the case on the rk3288 SRAM registers, where the watchdog tombstone is stored. Moving to GCC 5.2.0 introduced a change of strategy in the compiler, where a 32 bit read would be broken into byte-sized chunks, which caused a data fault when accessing the watchdog tombstone register. The definitions for byte-sized memory operations are also adapted to stay consistent with the rest. Change-Id: I1fb3fc139e0a813acf9d70f14386a9603c9f9ede Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11698 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-17cbfstool: Fix removing and adding file with same nameAaron Durbin
Currently, cbfstool regressed that removing a file from CBFS the space is marked as empty but the filename is still shown, preventing adding a file with the same name again. [1] ``` $ echo a > a $ echo b > b $ ./util/cbfstool/cbfstool test.rom create -m x86 -s 1024 Created CBFS (capacity = 920 bytes) $ ./util/cbfstool/cbfstool test.rom add -f a -n a -t raw $ ./util/cbfstool/cbfstool test.rom add -f b -n b -t raw $ cp test.rom test.rom.original $ ./util/cbfstool/cbfstool test.rom remove -n $ diff -up <(hexdump -C test.rom.original) <(hexdump -C test.rom) --- /dev/fd/63 2015-08-07 08:43:42.118430961 -0500 +++ /dev/fd/62 2015-08-07 08:43:42.114430961 -0500 @@ -1,4 +1,4 @@ -00000000 4c 41 52 43 48 49 56 45 00 00 00 02 00 00 00 50 |LARCHIVE.......P| +00000000 4c 41 52 43 48 49 56 45 00 00 00 02 ff ff ff ff |LARCHIVE........| 00000010 00 00 00 00 00 00 00 28 61 00 00 00 00 00 00 00 |.......(a.......| 00000020 00 00 00 00 00 00 00 00 61 0a ff ff ff ff ff ff |........a.......| 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| $ ./util/cbfstool/cbfstool test.rom add -f c -n c -t raw $ ./util/cbfstool/cbfstool test.rom print test.rom: 1 kB, bootblocksize 0, romsize 1024, offset 0x0 alignment: 64 bytes, architecture: x86 Name Offset Type Size c 0x0 raw 2 b 0x40 raw 2 (empty) 0x80 null 792 ``` So it is “deteled” as the type changed. But the name was not changed to match the *(empty)* heuristic. So also adapt the name when removing a file by writing a null byte to the beginning of the name, so that the heuristic works. (Though remove doesn't really clear contents.) ``` $ ./util/cbfstool/cbfstool test.rom remove -n c $ ./util/cbfstool/cbfstool test.rom print test.rom: 1 kB, bootblocksize 0, romsize 1024, offset 0x0 alignment: 64 bytes, architecture: x86 Name Offset Type Size (empty) 0x0 null 2 b 0x40 raw 2 (empty) 0x80 null 792 ``` [1] http://www.coreboot.org/pipermail/coreboot/2015-August/080201.html Change-Id: I033456ab10e3e1b402ac2374f3a887cefd3e5abf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11632 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-10-17cbfstool/cbfs_image.c: Just use one space before `=`Paul Menzel
Change-Id: Id31c889d1e83e7ddfb0f0f98b78601f37b71cfa2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11631 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17coreinfo: reboot when finishedMaxime de Roucy
Behave as nvramcui. Avoid a "General Protection Fault Exception" when launched by SeaBIOS on pcengines APU1. Change-Id: I00b1f859f76e693e8d49a38c1e02f4f49add85b7 Signed-off-by: Maxime de Roucy <maxime.deroucy@gmail.com> Reviewed-on: http://review.coreboot.org/11731 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17libpayload/Kconfig: Use official spelling for TinyCursesPaul Menzel
TinyCursess is officially spelled in CamelCase [1]. [1] https://github.com/tommyettinger/TinyCurses Change-Id: I7e0aa5af54140796a981c0f4c58950b25fdd67ba Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11727 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17libpayload/configs: Add default configuration with TinyCurses enabledPaul Menzel
Change-Id: Ib057e2b5f15b8d5bcdf45666f8761614317d25ee Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11726 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-17Add junit.xml code to top Makefile.inc instead of utilsMartin Roth
Instead of adding code to generate the junit.xml file for jenkins to each of the util makefiles, add it once to the top level Makefile.inc. Create a list of tools to run the test on. Add nvramtool and inteltool to the list of utilities tested. Note that the util builds depend on implicit rules, so MFLAGS and MAKEFLAGS have to be cleared to get the builds to work. Change-Id: Id7ee5ea41ce3bf4a40fb50942ae785bb838fa639 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11910 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>