| Age | Commit message (Collapse) | Author |
|---|
|
In order to reduce duplication of code use the common MP
initialization flow.
Change-Id: I2a7c628cfae7cf6af6e89fa8fc274f59127ff7c7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14592
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
|
|
1. PCI command reg write should be 16-bit.
2. HPTC reg write should be 8-bit. Also, use macros instead of
hard-coded values. Currently, the macros are defined in romstage.c,
but if more P2SB macros are added, it would be good to move them to a
separate header file.
Change-Id: Iad1eb6a95467a41ecf454092808d357425c4c2fc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14613
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
This fixes UPDATE_IMAGE builds, assuming that the fmap configuration in
the tree didn't change, at least as far as the CBFS regions are
concerned.
Another option would be to synthesize the fmap related files from the
existing image, but that comes with other issues (eg. what about
updating images old enough that there is no fmap?) and is more complex,
so keep it simple, stupid for now.
Change-Id: I036dab9f81f524f7d70bc0029b1ef835e6180a53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14601
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I99e5d7f3b46c90ca863ddf6c186b5447d0c8e6f2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14607
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I16c04452d2d6c3205aea29fe8aa8fad8fc485a46
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14600
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In If0d4d61ed8ef48ec20082b327f358fd1987e3fb9 the code
was changed from one to two lines in the body of an if()
statement, without adding braces.
Change-Id: Ibbbdf240157adae95151fb2ce0135948caa60108
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14621
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Add time delay support to the scripts.
TEST=Build and run on Galileo Gen2
Change-Id: I2c87977e2a2547e00769e59e1ee81fbbb5dff33f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14555
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Migrate the temperature sensor support from QuarkFspPkg into coreboot.
TEST=Build and run on Galileo Gen2
Change-Id: I6dc68c735375c9d1777693264674521f67397556
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14565
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add register access support using register scripts.
Initialize the USB PHY using register scripts.
TEST=Build and run on Galileo Gen2
Change-Id: I34a8e78eab3c7314ca34343eccc8aeef0622798a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14496
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Idae5ee5f1f48d904b704abe618165c0bec839979
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14048
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I57f935b94ab0db2e9ff9434fb496d470bb4ec987
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14463
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Update gdb to 7.11 and expat to 2.1.1
riscv64-elf is still broken.
Change-Id: Id7605f4274fcb15f9c3e366f5c492328f70f7956
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14461
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
New tools:
* mpfr 3.1.4
* binutils 2.26
* gcc 5.3.0
* llvm/clang 3.8.0
Patch changes:
* binutils-2.25_fix-aarch64.patch: fixed in 2.26
* binutils-2.25_host-clang.patch: the positions of header file
includes have been adjusted
* binutils-2.25_no-bfd-doc.patch: update to 2.26
* binutils-2.25_riscv.patch: update from riscv-gnu-toolchain
* gcc-5.2.0_elf_biarch.patch: update to 5.3.0
* gcc-5.2.0_gnat.patch: update to 5.3.0
* gcc-5.2.0_libgcc.patch: update to 5.3.0
* gcc-5.2.0_nds32.patch: update to 5.3.0
* gcc-5.2.0_riscv.patch: update from riscv-gnu-toolchain
* cfe-3.7.1.src_frontend.patch: update to 3.8.0
In the latest code of riscv-gnu-toolchain project, the patch for
{binutils,gcc}/config.sub has been removed, and the target is renamed
as riscv32 and riscv64. The `riscv' to `riscv64' change in xcompile is
in another commit.
Test results:
All GCC and LLVM/clang toolchain build successfully.
x86,arm: qemu boots
power8: firmware fails to boot
aarch64,mips: not tested
riscv: firmware fails to build with new binutils
clang: firmware fails to boot
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I42ce89c29263d768d161c28199994f17d0389633
Reviewed-on: https://review.coreboot.org/14227
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- fill_power_state makes a copy of the current snapshot of power
management
registers in CAR variable "power_state" for use in ramstage
- migrate_power_state adds CAR variable "power_state" to
CBMEM (CBMEM_ID_POWER_STATE)
- s3_resume state is updated in romstage_handoff block
Change-Id: I842b85c5e562893b58cd3b3f6432695fbd4430bf
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/14550
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
That was a workaround for the MRC cache API, which has since been
reworked. The workaround is no longer needed.
Change-Id: I1c1883f3ea37245615248459cd993ed774bf92de
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14574
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The MRC cache API has absolutely no reason to modify the data it is
asked to stash. Reflect that by taking all "data" parameters as
const void *.
Change-Id: I7a14ffd7d5726aa9aa5db81df82c06e7f87b9d9f
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14250
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
The PLL will never lock if the requested frequency is already set.
As the fallback may request the same frequency again exit early
to prevent a hang.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
Change-Id: I625b2956346d8c50cca84def6190c076bf99dbec
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14174
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add the following fallbacks:
* Try decreasing clock frequency.
In case of DDR1600 the next possible value of DDR1333 is being used.
* Try decreasing clock frequency.
In case of DDR1333 the next possible value of DDR1066 is being used.
* Disable failing channel.
The system may be able to boot with a single channel enabled.
The fallbacks are untested.
Change-Id: I3be7034ad25312b3ebf47a54f335a3893f8d7cc1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14173
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The LVDS port is configured to accept data from pipe A, but the panel
fitter and VGA were attached to pipe B.
Changes to VGACNTRL:
- select pipe A instead of pipe B.
- disable VGA centering to fix jitter.
TEST=Build and run on Thinkpad X200 in both text and framebuffer modes.
Change-Id: I2356f264580d8b021952c217de3477291d866f98
Signed-off-by: Nick High <nhigh@openmailbox.org>
Reviewed-on: https://review.coreboot.org/14524
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Add the ability to enable the display of the script:
* Added REG_SCRIPT_COMMAND_DISPLAY to enable and disable display output
* Added context values to manage display support
* display_state - Updated by the command to enable or disable display
* display_features - May be updated by step routine to control what
the step displays for register and value
* display_prefix - Prefix to display before register data
* Added REG_SCRIPT_DISPLAY_ON and REG_SCRIPT_DISPLAY_OFF macros to
control the display from the register script
* Added REG_SCRIPT_DISPLAY_REGISTER and REG_SCRIPT_DISPLAY_VALUE as
two features of the common display. With these features enabled
the following is output:
* Write: <optional prefix> register <-- value
* Read: <optional prefix> register --> value
TEST=Build and run on Galileo Gen2
Change-Id: If0d4d61ed8ef48ec20082b327f358fd1987e3fb9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14553
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove debug output and parted messages.
Change-Id: I6416a88b5fdb4c92741439e9edb5f753f885cbe3
Signed-off-by: Joseph Pillow <joseph.a.pillow@gmail.com>
Reviewed-on: https://review.coreboot.org/14460
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order to reduce duplication of code use the common MP and SMM
initialization flow.
Change-Id: I709ea938b720f26b351a1f950593efe077edb997
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14581
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
|
|
In order to reduce duplication of code use the common MP and SMM
initialization flow.
Change-Id: I5c5d678d7adb4c489752cca80b20f785ec8749d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14580
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
In order to reduce code duplication provide a common flow
through callback functions that performs the multiprocessor
and optionally SMM initialization. The existing MP flight
records are utilized but a common flow is provided such
that the chipset/cpu only needs to provide a mp_ops
structure which has callbacks to gather info and provide
hooks at certain points in the sequence.
All current users of the MP code can be switched over to
this flow since there haven't been any flight records that
are overly complicated and long. After the conversion
has taken place most of the surface area of the MP
API can be hidden away within the compilation unit proper.
Change-Id: I6f70969631012982126f0d0d76e5fac6880c24f0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14557
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Unconditionally provide the backup default SMM area API. There's no
reason to guard the symbols behind anything since linker garbage
collection is implemented. A board or chipset is free to use the
code or not without needing to select an option.
Change-Id: I14cf1318136a17f48ba5ae119507918190e25387
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14561
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix an issue where a broadwell machine without the ME
installed could result in an invalid status code being
reported. For certain values, this would result in the
intel_me_status function never returning. Fix has been
tested on a samus board w and w/o the ME blob installed.
Change-Id: I96667d3b89393f161e4d4efe0544efac98367e6c
Signed-off-by: Evan Lojewski <meklort@gmail.com>
Reviewed-on: https://review.coreboot.org/14409
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
The SMM module loader code was guarded by CONFIG_SMM_TSEG,
however that's not necessary. It's up to the chipset to take
advantage of the SMM module loading. It'll get optimized out
if the code isn't used anyway so just expose the declarations.
Change-Id: I6ba1b91d0c84febd4f1a92737b3d7303ab61b343
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14560
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Always set HOSTCFLAGS to the flags GMP was built with, defaulting to
"-Os" if it isn't built yet. Previously, if GMP was already built or
not even in the list of packages to be built, this was silently skipped
and other packages were built with empty HOSTCFLAGS.
Change-Id: I29b2ea75283410a6cea60dc1c92b87573aebfb34
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Commit 785a31d67e8f34065a2483080e4fd7032c3a8aad
(Makefile.inc: Move payload code to payloads/) breaks the usage of
Linux kernel as payload. The reason for it is that cbfs-files-y is
evaluated before payloads/external/Makefile.inc is sourced and as a
consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for
payload options. That leads to missing command line and initrd for
the kernel which in turn leads to kernel panic when it boots.
To avoid it, move the code which adds payload to cbfs completely to
payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is
set right before the payload itself is added to cbfs-files-y.
I have tested this patch with a Linux kernel as well as with SeaBIOS as
payload on mc_tcu3 and it works. If someone sees impact to other
payloads just let me know.
Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The xz archives are slightly smaller than the bz2 archives for gmp
and mpfr, so use them instead to speed up the download.
Change-Id: I3729455cdbc46e5a0cff119ecca97b0e00c3d402
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14462
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Both packages are not using the target architecture. Drop it,
and remove them from package_uses_targetarch
Change-Id: I58efde4cb7cc39e7e3c31527eb7682e318928100
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14464
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the EDK-II Quark file IntelQNCConfig.h. This adds the definitions
for the temperature sensor.
TEST=Build and run on Galileo Gen2
Change-Id: I70896e6187b878ea572535432912f1d4db895a99
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14497
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable the I2C and GPIO controllers
TEST=Build and run on Galileo Gen2
Change-Id: I97bbbb7c5e72edbed14702a4129d9cfa977e1911
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14558
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update the file to match the QuarkFsp code.
TEST=Build and run on Galileo Gen2
Change-Id: I090578d32165d34863548aec0e4a38fe915683c6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14452
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In the case where one of the FW_MAIN regions is empty, the last file
(empty) will also appear to be first and have a zero offset, making head
complain.
This is a very borderline use case, since the FW_MAIN_ regions should
have been filled previously, but an extra check doesn't hurt.
Change-Id: I15491c5b4a5e7d1f9fb369cc5fa4e3875e2dad3b
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14472
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
error: pointer targets of 'strcmp' differ in signedness
expected 'const char *' but argument is of type
'u8 * {aka unsigned char *}'
Change-Id: Id5cbb6fc2efd7c57abc59b08416047e10461436f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of using CBFS_SIZE from Kconfig, use values generated from fmap.
While at it, make sure that the cached region size is a power of two.
fmap_config is also added to cpu_incs-y, but that doesn't hurt (except
for some miniscule increase in compile time) because it's #if-guarded.
The upside is that dependencies are tracked properly.
Change-Id: I03a919e1381ca3d0e972780b2c7d76c590aaa994
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14573
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It used to use CONFIG_CBFS_SIZE. The plan is that CBFS_SIZE only informs
default*.fmd generation, while everything else derives its information
from there.
Also document the existing assumption that boot media should access the
COREBOOT region (and not any other potentially existing fmap region
containing a CBFS).
Change-Id: I08254e4510f71edf99c2c8b56ac8f92008727c4a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14572
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
By exporting base and offset of CBFS-formatted fmap regions, the code
can use these when it's not prudent to do a runtime lookup.
Change-Id: I20523b5cea68880af4cb1fcea4b37bb8ac2a23db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14571
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There's an in-tree fmap.h, and the file generated by fmaptool is likely
used in tandem with it. To avoid problems, rename the generated file
(which so far isn't used).
Change-Id: I95dfde513a7f78677cf18ecd7ce8745e40af316b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It's unused.
Change-Id: I50af2b50d2c5a7a24afe9099c5c01d17ce54a6c9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14569
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It's unused.
Change-Id: I853702e40dcab9f193b2a3de7deeec80ab1d25f0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14568
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It isn't used anymore.
Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14567
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I8a29ca1b07df68b50ab54276c9d9b32a81308e02
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14562
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Just because an 'as' with a certain prefix is available does not guarantee
that a 'gcc' with the same prefix is available as well.
Without a check detect_compiler_runtime() would try to execute an
unavailable binary and print something like this:
.../xcompile: line 218: arm-linux-gnueabi-gcc: command not found
Change-Id: Icbadfeb2860152f7cf7696a9122521d0d881f3aa
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14563
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Gitweb isn't online anymore, so fix a few broken links.
Change-Id: I7fdfcb60f83a718c9a5b6c7f7ef4df9206451d95
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14559
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove the UPD parameters to match QuarkFsp code.
TEST=Build and run on Galileo Gen2
Change-Id: Ie4639d1f087cc2bc4387aa691eb66b640fe8faf9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The BSP and AP callback declarations both had an optional argument
that could be passed. In practice that functionality was never used
so drop it.
Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14556
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The skylake-based Chromebooks use a separate verstage which runs
just after bootblock and prior to romstage. However, that
config is not enabled for coreboot.org so when
C_ENVIRONMENT_BOOTBLOCK changes were done it wasn't observed
that the Chromebook config failed because 2 _start symbols
were present. Remedy this failure by using the common
car_stage_entry symbol for taking over control flow.
Change-Id: I3f29b90ba8e3786b2106a34e49e6d1f9831dcc7c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14549
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
The skylake-based Chromebooks use a separate verstage which runs
just after bootblock and prior to romstage. The normal path for
romstage would be to reload the gdt, however in the previously
described scenario has verstage performing that work. Therefore,
provide that path under those conditions. The only difference
from the C_ENVIRONMENT_BOOTBLOCK scenario is that the stack
should not be reloaded since there's no way to know the top
of the stack.
Change-Id: Ic39ab52a856233d3042ac02a15ae4816ddfe07c7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14548
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
The path that just clears CAR_GLOBAL variables and jumps
to the stage entry point needs another condition for
separate verstage just after bootblock. However, the
current conditional is a negative conditional so
swap the logic around to make it easier to extend.
Change-Id: Iab6682498054715a6eaa0476390da6355238b9bc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14547
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Utilize the architecture dependent coreboot table size value
from <arch/cbconfig.h>
Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14455
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Stefan and others have discussed their interest in only
including options in Kconfig that are directly associated
with building a coreboot image. There are variables that
are architecture dependent that are utilized in the
coreboot infrastructure. To meet that goal, introduce
<arch/cbconfig.h> header file which defines variables
for the coreboot infrastructure that are architecture
dependent but utilized in common infrastructure.
Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14454
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The ECC check bits of all ECC DIMMS were inadvertently initialized
twice in the same routine, significantly delaying startup. Part
of this was related to an obsolete MCA workaround that has been
fixed through multiple commits, therefore the workaround is no
longer needed.
Only initialize the ECC check bits once.
Change-Id: I90ac1147d9b006794d29b866a9cb5b7ead8f01e7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14503
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
C_ENVIRONMENT_BOOTBLOCK on x86 is like romstage and uses cache-as-ram
separately. It does not use any data/bss sections.
Change-Id: I8957f467f01e754fa2d95783466a01daa6c4e51a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14533
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Change-Id: Ic0866a5183c64070ef35b21ba00586bc65dfcde8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14538
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id584cbf02c9d3ecb89fcf2a3190f0a73816954a8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14526
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If4d57c7898c0de20035533dccd4554f45a71d5d1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14525
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Idb948acd1a508379f600fbd2fd40fb26b7571d7c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14545
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
During receiver enable cycle training on Family 15h the entire range
of possible delays is searched, even though the single passing window
is often found nearly immediately. Skip the remainder of the delay
range after the passing window has been located.
Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14544
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
During DQS receiver enable cycle training on Family 15h platforms the
read data timing registers were inadvertently set to zero on every
lane training attempt.
Ensure that the read data timing registers are correctly set after
each lane is trained in receiver enable cycle training. This allows
more than one RDIMM to function on a given DCT channel.
Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9
Tested-On: ASUS KGPE-D16
Tested-With: 1x Opteron 6262HE
Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1)
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14543
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I1f5b024606093dc81de3f3d69b7a43e20141b709
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14542
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The existing Family 15h receiver enable training code stored
temporary delay values in the wrong variables, leading to
the requisite averaging of delays across nibbles not being
applied. This in turn made x4 DIMMs less stable than they
should have been.
Store temporary nibble delay values in a dedicated array.
Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14541
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the platform_bus_table routine and replace it with a link time
table. This allows the handlers to be spread across multiple modules
without any one module knowing about all of the handlers.
Establish number ranges for both the SOC and mainboard.
TEST=Build and run on Galileo Gen2
Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14554
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add xor support which enables toggling of a bit:
* REG_SCRIPT_COMMAND_RXW enum value
* REG_*_RXW* macros to support using REG_SCRIPT_COMMAND_RXW
* REG_*_XOR* macros to support using REG_SCRIPT_COMMAND_RXW
* reg_script_rxw routine to perform and/xor operation
* case in reg_script_run_step to call reg_script_rxw
TEST=Build and run on Galileo Gen2
Change-Id: I50a492c7c2643df5dc2d2fa7113e3722c1e480c7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14495
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14315
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The pad for CS2 of the Fast SPI interface needs to be configured for
automatic MMIO translation when a SPI TPM is utilized. Instead of
unconditionally configuring that pad under LPC_TPM provide a explicit
Kconfig for a mainboard to select.
Change-Id: Ia94b90e12d71a4b849359188a853f7e036cc583b
Signed-off-by: Aaron Durbin <adurbin@chormium.org>
Reviewed-on: https://review.coreboot.org/14531
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
|
|
Fix regression introduced by:
Ib48fe8380446846df17d37b22968f7d4fd6b9b13
Don't run channel_test on S3 resume as it overrides memory
that might be in use.
Fixes MCE events reported by the GNU/Linux kernel that
low memory has been modified.
Reset on failed s3 resume.
Change-Id: Ibadea286619c7906225f86a93aaa0b4caf26cabe
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14439
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add new mainboard for MC BDX1 board which is based on Intel Camelback
Mountain. This mainboard is an industry type board and has several
Ethernet interfaces among with two USB3.0 connectors. It uses 24V DC
power supply and has its own form factor which does not match any
standard.
This commit adds the new mainboard and prepares the Kconfig
environment so that this board can be selected and generated.
Although the generated image can boot into Linux and DOS,
not all functions are implemented yet.
Forthcoming commits will add more functionality.
Change-Id: I29011cfd3b0d13bcf163223f657e02f69978e39a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14516
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
|
|
DIMM training can sporadically fail due to external influences or various
errata. In these cases, restarting to retry training is a more appropriate
response than halting the system and requiring manual intervention.
Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14529
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ifdf40986c2407d8c5b0097654b42e056f4498d39
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: If0f835e69862a78433e7c1a34efa4706cc27b214
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14517
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To include gfx.c in ramstage, there is a Kconfig option
(FSP_BAYTRAIL_GFX_INIT) which can be activated on demand.
Unfortunately, the "$"-character is missing so that this switch is
never active.
Change-Id: I0c3c562b3caca53ac6510c2c5dc30e7f606f5ad0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14532
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Switch all types to uint8_t and the like instead of u8.
Change-Id: Ia12c4ee9e21e2d3166c2f895c819357fa2ed9a94
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14515
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use hwilib in vendorcode/siemens/hwilib to get fields from hwinfo
instead of having mainboard specific hwinfo code.
This patch does not change the functional behavior in any way.
Change-Id: Idb226a82a08b1b753f654c5cde106236e72f33c3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14506
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a library which unifies access to Siemens specific hardware information
data. This library is meant to be used with Siemens platforms and can be
selected in Kconfig. The needed source of information has to be present
in cbfs.
This lib can be used in romstage and ramstage.
Change-Id: I2c6e003b0c123b4cf6a84906c2b133b8c38c8b1a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14505
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add chromeos required GNVS feature. The GNVS table stays in both CBMEM
and ACPI DSDT tables.
Change-Id: I4db0eb18d2de62917a94704318a7896c04e4777f
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14471
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add GPIO controller in ACPI device description.
GPIO controller driver is probed in kernel and all
the pins in the banks are showing respective values.
Change-Id: I0512cfec872113b15fd204ec3b95efeac87f694a
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14478
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable caching of BIOS region with variable MTRR. This is most
useful if enabled early such as in bootblock.
Change-Id: I39f33ca43f06fce26d1d48e706c97f097e3c10f1
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This adds early LPC setup in bootblock (for Chrome EC) as well as
late (ramstage) IO decode/sirq enable.
Change-Id: Ic270e66dbf07240229d4783f80e2ec02007c36c2
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14469
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use postcar infrastructure to enable caching of area where ramstage
runs.
Change-Id: I3f2f6e82f3b9060c7350ddff754cd3dbcf457671
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14095
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move _CRS scope from MCHC device only to whole pci root bus. Otherwise
ACPI will not able to assign resource to devices other than MCHC.
Change-Id: Iaa294c63e03a4fc6644f1be5d69ab3de077e6cc3
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14477
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enabled LPC channel between host and EC.
Superio.asl will enable proper probing of onboard keyboard.
Change-Id: I57014fc90b345661853280ae3402f86e56af5fb9
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/14468
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
One of devices connected to FAST SPI bus is TPM. SoC uses dedicated
line for chip select for TPM function. If TPM is used, that line needs
to be configured to a specific native funciton.
Change-Id: Ib5bf4c759adf9656f7b34540d4fc924945d27a97
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14467
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
coreboot writes RDSP at 0xf0000. Since depthcharge wipes usable
memory regions before starting, kernel can't find RDSP.
Change-Id: I584bd5d24248cf38f46342615cf3b0252a821b2a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14466
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Without ACPI PCI IRQ definitions kernel is left only with informaiton
available in PCI config space, which is not sufficient.
Change-Id: I3854781049851b5aa5b2dbf3257ece2fee76c3e2
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Memtest86+ was pulling origin/master which will change over time. This
adds a commit-id as a stable version to allow it to be reproducible.
The other secondary payloads, coreinfo and nvramcui, do not need this
because they are part of the coreboot repo and not fetched from an
external source.
Change-Id: I20c516010f76cf03342bd8883d0ee7ac5f8bc7e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14520
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This series of patches attempts to update all of the external payload
makefiles to be as similar as possible.
- Add .git to the git repo URL to show that it's a git repo.
- Use the common checkout, fetch, and clone ($(project dir)) targets
- Add TAG-y and NAME-y variables - just with origin/master for now.
Stable will be added shortly.
- Make sure all phony targets are in .PHONY
Change-Id: If83c100841d5f91a9fab7ac44ba20ec2271c0594
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14152
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Test results under 16 days old display with an incorrect background color
due to the leading zero not being preset in the associated HTML color code.
Add the leading zero where needed to generate a valid HTML color code.
Change-Id: I0dfe29ec1afc409a4908073922ac31a4091f0f1f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14514
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- Get the absolute pathname for LIBPAYLOAD_PATH
- Update distclean:
--correctly remove .config and .config.old - *.config doesn't match
.config
-- remove obsolete files from cleanup
Change-Id: I6aa51b4ac2b392f786aeb12647be5073e6d02df5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14485
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I89dca25d93a4c94cc51f313397e49ba763948450
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14484
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: If845729bc34df646a5628ac2a35acc737fd4701d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14483
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The existing memory test routine was insufficient to detect certain types
of bus instability related to multiple incompatible RDIMMs on one channel.
Add a PRNG second stage test to the memory test routine. This second stage
test reliably detects faults in memory setup for RDIMM configurations that
also fail under the proprietary BIOS.
Change-Id: I44721447ce4c2b728d4a8f328ad1a3eb8f324d3d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14502
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The wrong DIMM number was used in the initial non-target MRS
setup routines. This had no functional impact other than to
print the wrong DIMM number in the DDR3 verbose debug output.
Change-Id: I480118ed00e1786a06e641a56f0fb19cd87f92eb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14501
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The existing RDIMM RC control word send routines were a hodgepodge
of various AGESA chunks with different ways of handling the same
task. Unify the control word chip select setup, use precise timing
routines on Family 15h, fix a couple of incorrect masks, and add
additional debugging statements.
It is believed that this patch is cosmetic and does not significantly
alter existing functionality.
Change-Id: Ie4ec7b6a7be7fce09e89f9eec146cc98b15b6160
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14500
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Decode each cbfs_payload_segment into native byte order during
segments iteration.
Note :
List ordering has been changed, segments are now always inserted
at the end.
cbfs_serialized.h PAYLOAD_SEGMENT definitions have been changed
to their standard order (big-endian).
Change-Id: Icb3c6a7da2d253685a3bc157bc7f5a51183c9652
Signed-off-by: George Trudeau <george.trudeau@usherbrooke.ca>
Reviewed-on: https://review.coreboot.org/14294
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When more than one DIMM is installed on a DCT, only the first DIMM
delay values are scaled to the new memory clock frequency after a
memory clock change during write leveling.
Store the previous memory clock of each DIMM during write leveling
to ensure that every DIMM has its delay values rescaled.
Change-Id: I56e816d3d3256925598219d92783246f5f4ab567
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14479
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A major issue with the board-status Wiki page is that it shows all
test results equally regardless of age. As a test result ages it
becomes more likely that the board no longer works peroperly under
coreboot due to code churn.
Visually indicate board-test status "at a glance" by smoothly fading
the background color of the test result from green to yellow as the
test result ages. This patch sets the full yellow transition to 255
days after test for programming convenience, however the number of
days required to fully "stale" a test result could be modified
relatively easily.
Change-Id: I5a076a6cc17d53fda8e4681e38074fc1f46c0e12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14457
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add 'nvramcui' target to make it easier to build and test.
Put both nvramcui & coreinfo targets into .PHONY because they
both exist as directories.
Change-Id: I9cf76785e69f3c8e47fe92f1b1648fd0f7a63c3e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14481
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is in response to issue #28: board-status should reject duplicate
uploads.
Change-Id: Iff99be154b35e8c0f9f05f9470d1c2dcff8510b8
Signed-off-by: Huimin Zhang <thehobn@gmail.com>
Reviewed-on: https://review.coreboot.org/14187
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
