summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-24buildgcc: Do not try to install GCC if build failedNico Huber
We didn't bail out if configuring or building of GCC failed but run `make install` and later steps instead. This resulted in very confusing logs that concealed the actual error. Change-Id: Ia064e0bfd96f0cbad391da3bb19e4dc304d988ff Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26496 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24soc/intel/baytrail: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8b2cfe3e2090fb8eed755e40d337c6049d8dd96e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24nb/intel/fsp_sandybridge: Fix lost const qualifier on 'device_t'Elyes HAOUAS
Missing '*const' in Change #26195 added into function northbridge_get_tseg_base(void). Change-Id: Ideb9a9cb98d34f2ed1034b8ee20b3b06aa5ff1e2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26455 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24sb/intel/i82801ix: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iefef4e72f1012c8a6edbb9e5c94bdc162bed93d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/intel/i82801jx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I37be7672c88b28180d7d4b46928ebed8472ec020 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/intel/fsp_i89xx: Get rid of device_tElyes HAOUAS
Use of device_t is discouraged unless necessary. Change-Id: I89f9fe94c1e3e5c2b183572d7f603d016d0f0e1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24Remove leftover Intel CPU supportKyösti Mälkki
Change-Id: I6ac67137d5f5c63dbc4fc54eacb3e326ccf423d4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24mb/hp: Add new port compaq_8200_elite_sffPatrick Rudolph
Add new port based on autoport. The board uses a NPCD378 SuperIO, that is full of custom hardware. The 8MiB flash SOIC-8 can be accessed after cutting of a part of the DIMM slot holder. The flash IC has no diode, powering a part of the board while flashing externaly, including the Standby-LED. The following have been tested and is working: * Native raminit with up to four DIMMs * Libgfxinit on DisplayPort * USB * EHCI debug * Serial on RS232 * Ethernet * PCIe on x4 * PCIe on x16 * SATA * Booting GNU Linux 4.14 using SeaBIOS 1.11.1 as payload * Flashing internaly * PS/2 is working Untested: * PCI slot * LPT port * VBIOS * S3 resume Not working: * PSU fan managment (runs at 100%) * Half of SuperIO functionality is unknown TODO: * Reverse engineer remaining SuperIO registers * Reverse engineer SMM Fixes on follow-up commits: * Added PSU fan control * Reverse engineered some of Super IO's HWM registers * Added SMBIOS tables for IPMI Change-Id: I4ee8da6349222fda8b6c30a7210ffdd65c183439 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/25385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24AMD geode/lx: Remove generic_sdram.c includeKyösti Mälkki
The file under lib/ will be removed with K8 and Geode LX is the only other platform using it. Change-Id: Id49d72358ecfc4aae4980e3ae787952073e5c838 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24AMD: Remove some leftover includesKyösti Mälkki
Change-Id: I740d945693b4f16495488fb76ad6d1ee531185ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24mb/gigabyte/ga-h61m-s2pv: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux with latest kernel. This code is based on the output of autoport as well as existing ga-b75m-d3h and ga-b75m-d3v mainboards. Working: - Serial port I/O - S3 suspend/resume (broken with SeaBIOS 1.11.1) - USB ports and headers - Gigabit Ethernet - Integrated graphics (libgfxinit) - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit (4+4GB, 4+2GB, 2+2GB, DDR3-1333) - Native graphics init with libgfxinit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. - NVRAM settings. Only `gfx_uma_size` and `debug_level` have been tested with values different from the default. Untested: - VGA BIOS for integrated graphics init - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. - PS/2 ports - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - SATA devices with Tianocore (payload issue) - PCIe to PCI bridge. It seems to be poorly supported on Linux, it lacks a public datasheet and vendor BIOS behaves in the same way: The bridge and the devices behind it appear, but drivers fail to find devices attached to the bridge. Change-Id: I598a0b75093a0f1aef2ac615035d66786a8c22cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/25912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-24Remove leftover AMD CIMX RD890 northbridge supportKyösti Mälkki
Change-Id: I3f2cea79a11a52e94f479b25f22eb3726af38fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover AMD CIMX RD890 vendorcodeKyösti Mälkki
Change-Id: Ic7d80b25c0815f3816ae40646d024e0d9fe61f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover VIA vt82c686Kyösti Mälkki
Change-Id: Id215fb22c3cf1890fd001e2f7a9a7bd0105c1747 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover Intel i82801b supportKyösti Mälkki
Change-Id: If85d73745ec858155c501aa637fd27a62a41dd68 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover Intel i82801a supportKyösti Mälkki
Change-Id: Ibcecd34d552cd1a4d945c74996d47223a39dc5c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24nb/amd/amdfam10: Get rid of device_tKyösti Mälkki
Change-Id: Iac6be374842063cc383af20c73900e3699a72653 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/amb/rs780: Get rid of device_tKyösti Mälkki
By mistake this was forgotten from previous commit touching the same directory. Change-Id: I23e3e579ccbcb8a251cdde11215ec171b78b7159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26494 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/packardbell/ms2290: Get rid of device_tKyösti Mälkki
Change-Id: I42b19d660b681cca8fea7d2f52b43c8daceb5e35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24mb/emulation/qemu-q35: Get rid of device_tKyösti Mälkki
Change-Id: I74461e75abce6cdd0c7a16b3a6589de3486a1a3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24nb/intel/x4x: Adapt post JEDEC for DDR3Arthur Heymans
Change-Id: I708f98dc2f36af73bb5933d186b4984649e149a1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x/raminit: Add DDR3 enhanced mode and power settingsArthur Heymans
Change-Id: I9d34154d3ac1dd1e5400d692d4dcce70d95662c8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x/raminit: Add DDR3 specific dra/drb settingsArthur Heymans
When programming the final dram attribute and dram boundary settings, on DDR3 dram one also needs to enable ZQCAL in the CxREFRCTRL (DRAM Refresh Control) register as documented in "Intel ® 4 Series Chipset Family" documentation. Change-Id: I11a79f6800dbfe19c2bd33c0d6caca14b034e384 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-24nb/intel/x4x: Implement write levelingArthur Heymans
DDR3 adapted a fly-by topology which allows for better signal integrity but at the same time requires additional calibration. This is done by settings the targeted rank in write leveling mode while disabling output buffer on the other ranks. After that the DQS signal gets sampled over DQ until a transition from high to low is found. Change-Id: I695969868b4534f87dd1f37244fdfac891a417f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x: Add DDR3 JEDEC initArthur Heymans
Add DDR3 JEDEC init (Power up and Initialization by setting emrs regs) This also modifies the send_jedec_cmd function as DDR3 dimms can have ranks mirrored which needs to be accounted for. The ddr3_emrs1_config array is placed externally since it is also needed for write leveling. Change-Id: I510b8669aaa48ba99fb4dcf1ece716aef26741bb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24device: Always build device_simple.c for less code duplicationNico Huber
Change-Id: Iec0a11d67d7641996f26b3a01352be762006ebb6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24src: Add space after 'while'Elyes HAOUAS
Change-Id: I44cdb6578f9560cf4b8b52a4958b95b65e0cd57a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-24mb/intel/glkrvp: Remove unused DPTF_CPU_ACTIVE_ACx definesSumeet Pawnikar
GeminiLake platform is fan-less design. We do not need these DPTF_CPU_ACTIVE_ACx defines. Removing these for GeminiLake RVP board as these are not being used. Change-Id: I810809bf58198a028e6cfcdbd68887f5f154a0ad Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/26469 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/google/reef: Remove unused DPTF_CPU_ACTIVE_ACx definesSumeet Pawnikar
ApolloLake based reef platform is fan-less design. We do not need these DPTF_CPU_ACTIVE_ACx defines. Removing these from all reef variants as those are not being used. Change-Id: Id3cb7f7826a5e02cf447c70ab5cdc9b5d86982ca Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/26468 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24src: Remove space after `defined`Elyes HAOUAS
Change-Id: If450a68e98261ffba4afadbce47c156c7e89e7e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26460 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24nb/intel/sandybridge: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If36a879fbe7a93a214d74dbfa6fb3ee2d09a044a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24chromeec: Add support for controlling USB port powerEmil Lundmark
This maps a bit field to the EC (EC_ACPI_MEM_USB_PORT_POWER) that can be used to control the power state of up to 8 individual USB ports. Some Chromeboxes have their GPIO pins for controlling USB port power wired to the EC, so they cannot be accessed directly by coreboot. Change-Id: I6a362c2b868b296031a4170c15e7c0dedbb870b8 Signed-off-by: Emil Lundmark <lndmrk@chromium.org> Reviewed-on: https://review.coreboot.org/26471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-24mb/intel/glkrvp: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I791a69aeca9b44daabc9a3e5fb9ac92e6b22f3e5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-24mb/nvidia/l1_2pvv: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ife8ca30322d83c6d9276e79c057f12a901d6e8f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26312 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/google/poppy: Enable SAR config on NamiAmanda Huang
This change enables SAR config on Nami with CHROMEOS option. BUG=b:75077304 BRANCH=master Change-Id: I8217333db2db6c0fd5e1c144dedd3692b1e1e6a3 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/kahlee/dsdt.asl: Add method _SWSRichard Spiegel
_SWS is the recommended method of wake source retrieval. Now that PM1I and GPEI are available at NVS, add the method _SWS to kahlee/grunt ACPI code. BUG=b:76020953 TEST=Build grunt Change-Id: I5930438af40e6f9177462582cafb65401d9c60f4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-23stoneyridge: Store wake parameters in NVSRichard Spiegel
ACPI _SWS needs information on PM1 and ACPI events (though events can be read directly). Unfortunately PM1 is cleared in normal path and in resume path. Save PM1 and ACPI events in NVS to be accessed by ACPI _SWS. BUG=b:75996437 TEST=Build and boot grunt recording serial. Run suspend stress test, after 3 resumes closed file and examined for the message indicating what was being saved to NVS. Two different path, normal boot (first boot) and resume path had different PM1. Change-Id: If3b191854afb27779b47c3d8d9f5671a255f51b5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26208 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-233rdparty/libgfxinit: Update submodule pointerNico Huber
Update to current master. Beside a minor workaround for GCC 8 compatibility, this includes only refactorings and preparations for G4x support. Change-Id: I6b2aa6bd9d41b852dacd8e1dfe89d92c8a548121 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26420 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-233rdparty/chromeec: Update to latest masterPatrick Georgi
Includes the necessary changes to build with gcc 8.1 Change-Id: Ie8c3dede4d702ab7838162dbff09f94df34b7c91 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/26453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-23soc/amd/common/block/pci: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I82089475eb43d58303d1091f35aee06f1f04b4a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-23soc/amd/stoneyridge/: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I84fbc90b2a81fe5476d659716f0d6e4f0d7e1de2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-23sb/amd/rs780: Get rid of device_tKyösti Mälkki
Change-Id: Ica3b6f2d0b270930df77d528e70bd15972da8757 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-23sb/amd/sr5650: Get rid of device_tKyösti Mälkki
Change-Id: If03864d5e32dfc4a2e5e11a96a4df62699ca4392 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-23mb/siemens/sitemp_g1p1: Get rid of device_tKyösti Mälkki
Change-Id: I2362c46c0b525fa67833e52f210265da1926142c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-05-23mb/emulation/qemu-i440fx: Get rid of device_tKyösti Mälkki
Change-Id: I11c35d22d9a9cba3cdb6af0ec1d2c01de8c20b6e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-23nb/amd/pi: Get rid of device_tKyösti Mälkki
Change-Id: I9b1c597f5c6995f19e9697e8aa698fa672a220b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26473 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-23util/intelmetool: Add Makefile target for OLDARC definitionMatthias Gazzari
This allows one to compile intelmetool with support for older ME versions by setting the OLDARC preprocessor definition. For example, compiling with OLDARC enabled avoids the "ME: GET FW VERSION message failed:" error on the Lenovo X201i (ME version 6.0). Change-Id: I5eb0da7663e795f790e2723bb334447380724b56 Signed-off-by: Matthias Gazzari <mail@qtux.eu> Reviewed-on: https://review.coreboot.org/26450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-23nb/amd/agesa: Get rid of device_tKyösti Mälkki
Change-Id: I5bd1c1cd71bd9541c1a95d444cd8d5ff40687dde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26436 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-23mb/google/poppy/variants/nocturne: enable MKBPNick Vaccaro
BUG=b:79617938 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", flash nocturne, boot to kernel, run evtest and verify that cros-ec-buttons is present and functional. Change-Id: Id710782e1f4e18eaac2a90c7c0f91af5223dbce3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: enable I2C #5 busNick Vaccaro
Enable I2C #5 for rear camera and SAR. BUG=b:79784124 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage' and verify i2c bus #5 is detected. Change-Id: Ic5b754fb97231aeab0278d71f8ced9343c30feda Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: deassert audio amp resetNick Vaccaro
Drive SPKR_RST_L (GPP_A19) high at boot to take audio amps out of reset. BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", boot to kernel, and verify sound works via "aplay /dev/random" Change-Id: Ia49931f2dc7802edc8a46114b081e4a96eeee604 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: add touchscreen register infoNick Vaccaro
- add ACPI register information for touchscreen WCOM digitizer BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify touchscreen on Nocturne board works. Change-Id: I9790a930e8ed2748d568ce58c931ce34b3e22007 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23sb/intel/i82801dx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I36f064b67f14556e38b41b7f64c3e27d8d935367 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-23sb/intel/i82870: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I751b72733de2e3bf3aebd1bc85dc83ec1c406faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-22soc/intel/apollolake: Bypass FSP's CpuMemorytest, PCIe pwr seq & SPI InitSrinidhi N Kaushik
CpuMemoryTest in FSP tests 0 to 1M of the RAM after MRC init. With PAGING_IN_CACHE_AS_RAM enabled for GLK, there was no page table entry for this range which caused a page fault. Since this test is anyway not exhaustive, we will skip the memory test in FSP. There is an option to do PCIe power sequence from within FSP if provided with the GPIOs used for PERST to FSP. Since we do this from coreboot, will skip the PCIe power sequence done by FSP. FSP does not know what the clock requirements are for the device on SPI bus, hence it should not modify what coreboot has set up. Hence skipping SPI clock programming in FSP. CQ-DEPEND=CL:*627827 BUG=b:78599939, b:78599576, b:76058338 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I4fa7a73fbb4676bb7af2416c8a33bf10ef41dd53 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/26284 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22vendorcode/intel: Update GLK FSP Header files w.r.t FSP v2.0.3Srinidhi N Kaushik
Update FSP header files to match FSP Reference Code Release v2.0.3 for Gemimilake CQ-DEPEND=CL:*627827 Change-Id: I17438f18fc3a1ea7ad9bd69a06adb1330d917257 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/26285 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22Documentation: Update doxygen config filesMartin Roth
- Update the config files to 1.8.13 - Unify the coreboot and coreboot_simple configs. The only difference now is that coreboot uses the graphviz library to generate call graphs and other things, while coreboot_simple does not. This means that the doxygen_simple target builds in just over a minute, while the doxygen build target takes roughly an hour. - Both targets now only document coreboot proper. While at times it might be useful to see links to code from src/vendorcode, 3rdparty, or util, these directories also really clutter up the doxygen output. To make it easier to see the coreboot code, all of these directories are excluded. Change-Id: Iefc667ee2f65859f151f5a97b7b9d182e8ed31f7 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/26390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22util/testing: Convert tegra124 and tegra210 builds to junitMartin Roth
Because the tegra124 & tegra201 lp0 builds weren't junit tests, the builds weren't actually picked up by jenkins, so any failures were not previously reported. Change-Id: Ie443ca713912d01ccf6921ce49f846d7297163ef Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/26422 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22soc/nvidia/tegra(124|210): Add distclean targetsMartin Roth
Add distclean targets so these can be called by the junit.xml test target needed for jenkins testing. Change-Id: I5991b43503da1778a6d74a57fbc0daf862e570d7 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/26433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-22src/device: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. The function prototype for "struct device *add_cpu_device" is already correct and doesn't need to be fixed. Change-Id: I7bd8b93922f113bdaf7ba460acf6a7d62c4df013 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26067 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22sb/intel/i82801gx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iccddf3140fd94c2e5a246fe2839573f5dd387147 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22sb/intel/fsp_rangeley: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If92825f5bdb1399f61b7eba3ae81caa9c264a554 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22sb/intel/fsp_bd82x6x: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I499414c067b06fa94b53832894e804118f7c3e80 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22device/device_util.c: Remove space after sizeofElyes HAOUAS
Change-Id: Ic8b77c78739badbea398053944484a55f715d03d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22sb/ti/pci{1x2x,i7420,xx12}: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I37c6db65be4477dabb6064c3cc7ea1c63e467d19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22sb/broadcom/bcm5785: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ia39347f9d07bb0055ea4686a8b319f323f68062e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22sb/broadcom/bcm5780: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ia46b909c78086d9417cabc1cd65e16d264a8df8e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22util/intelmetool: Fix missing commaMatthias Gazzari
Change-Id: I4cb70c2aa466ac71dc8fcd25a7c1824696f32909 Signed-off-by: Matthias Gazzari <mail@qtux.eu> Reviewed-on: https://review.coreboot.org/26449 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22mb/google/octopus: Re-size flash WP_RO segmentSrinidhi N Kaushik
Update the size in WP_RO segment of the flash to accommodate latest FSP builds with debug. CQ-DEPEND=CL:*627827 Change-Id: Ic0eb9254421e99c8d204d8dbb86e6c6c2ec8719c Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/26186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22stonyridge: Add TP_Perf_STRUCT structRaul E Rangel
The TP_Perf_STRUCT was missing from pi/00670F00. So I copied the file from src/vendorcode/amd/pi/00630F01/Include/IdsPerf.h and removed everything that we don't need. I did have to change MAX_PERFORMANCE_UNIT_NUM so it matches the size used by pi/00670F00. This struct is used to extract the timestamps from AGESA. BUG=b:64549506 TEST=built on grunt Change-Id: I06ec82348e3d10f2430c1192a925a49389ae4414 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26235 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22amd/stoneyridge: Increase SMM reserved memoryMarshall Dawson
Add 64KB to the reserved memory used for stage_cache. This corrects an error observed when using a debug build of the AGESA blob. Messages on initial boot AGESA: Saving stage to cache Error: Can't add stage_cache 57a9e101 to imd and during resume AGESA: Loading stage from cache Error: Can't find stage_cache 57a9e101 in imd TEST=boot/suspend/resume Grunt with debug and release builds BUG=b:79154155 Change-Id: I3f27059fcef37e335d0301142ba4dedb3809e369 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/26386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-223rdparty/libhwbase: Update submodule pointerNico Huber
Pull a minor update for GCC 8 compatibility. Change-Id: I0a4af47d56f3ca0b8ed82533e84c44041661ca35 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26306 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22mainboard/google/kahlee: Update RW_LEGACY size in fmapMartin Roth
Add the unused space to the RW_LEGACY area. BUG=b:79433466 TEST=None Change-Id: I897d1dcf75466fe9bdb814c8a9db0fecb5c42af6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22google/kahlee: Swap UNIFIED_MRC_CACHE and RW_SECTION_A in fwmapDaniel Kurtz
The firmware_Mosys FAFT test does not allow RW_SECTION_A, RW_SECTION_B or RW_SHARED to be 0-sized, nor located at offset 0x00000000. Swap UNIFIED_MRC_CACHE and RW_SECTION_A to pass this test. BUG=b:79865447 TEST=test_that -b grunt ${IP} firmware_Mosys Change-Id: If60919fd998ac786d58a5a258d7b5ded727db64b Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22util/lint: Make the non-ascii character check stableMartin Roth
Change-Id: I967f67a19a96cac8b7e0e98356e87d7d0610d4b2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-22src: Remove non-ascii charactersMartin Roth
Change-Id: Iedb78e24a286a51830c85724af0179995ed553be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-22rk3399: Enable bootblock compressionJulius Werner
This patch enables the new bootblock compression feature on RK3399, which requires moving MMU initialization into the decompressor stage and linking the decompressor (rather than the bootblock) into the entry point jumped to by the masked ROM. RK3399's masked ROM seems to be using a bitbang SPI driver to load us (very long pauses between clocking in each byte), with an effective data rate of about 1Mbit. Bootblock loading time (as measured on a SPI analyzer) is reduced by almost 100ms (about a third), while the decompression time is trivial (under 1ms). Change-Id: I48967ca5bb51cc4481d69dbacb4ca3c6b96cccea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22Introduce bootblock self-decompressionJulius Werner
Masked ROMs are the silent killers of boot speed on devices without memory-mapped SPI flash. They often contain awfully slow SPI drivers (presumably bit-banged) that take hundreds of milliseconds to load our bootblock, and every extra kilobyte of bootblock size has a hugely disproportionate impact on boot speed. The coreboot timestamps can never show that component, but it impacts our users all the same. This patch tries to alleviate that issue a bit by allowing us to compress the bootblock with LZ4, which can cut its size down to nearly half. Of course, masked ROMs usually don't come with decompression algorithms built in, so we need to introduce a little decompression stub that can decompress the rest of the bootblock. This is done by creating a new "decompressor" stage which runs before the bootblock, but includes the compressed bootblock code in its data section. It needs to be as small as possible to get a real benefit from this approach, which means no device drivers, no console output, no exception handling, etc. Besides the decompression algorithm itself we only include the timer driver so that we can measure the boot speed impact of decompression. On ARM and ARM64 systems, we also need to give SoC code a chance to initialize the MMU, since running decompression without MMU is prohibitively slow on these architectures. This feature is implemented for ARM and ARM64 architectures for now, although most of it is architecture-independent and it should be relatively simple to port to other platforms where a masked ROM loads the bootblock into SRAM. It is also supposed to be a clean starting point from which later optimizations can hopefully cut down the decompression stub size (currently ~4K on RK3399) a bit more. NOTE: Bootblock compression is not for everyone. Possible side effects include trying to run LZ4 on CPUs that come out of reset extremely underclocked or enabling this too early in SoC bring-up and getting frustrated trying to find issues in an undebuggable environment. Ask your SoC vendor if bootblock compression is right for you. Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22Makefile.inc: Export CCACHE_EXTRAFILES and add __BUILD_DIR__ definitionJulius Werner
This patch adds the CCACHE_EXTRAFILES variable to the list of exported environment variables, which can be useful as a target-specific variable to make ccache aware of extra dependencies that it cannot figure out on its own. It also adds a CPPFLAGS parameter to define the __BUILD_DIR__ constant for the preprocessor so that the current output build directory can be referenced in C code if necessary. Change-Id: I4fdd08842972cfed8ef5e5a61ebf859c0571bcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22bootblock: Allow more timestamps in bootblock_main_with_timestamp()Julius Werner
This patch adds more parameters to bootblock_main_with_timestamp() to give callers the opportunity to add additional timestamps that were recorded in the platform-specific initialization phase. Change-Id: Idf3a0fcf5aee88a33747afc69e055b95bd38750c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22Makefile.inc: Add separate bootblock.raw.elf with allocatable BSSJulius Werner
This patch moves the objcopy invocation that changes the bootblock's section flags to make sure .data and .bss are preserved in the binary image from the generation of bootblock.raw.bin into a separate bootblock.raw.elf file. Some SoCs (like SDM845) like to have an ELF rather than a raw binary as input to their masked ROM wrapper generation script. Also move those objcopy flags out into a variable because I'll need them again in a later patch. Change-Id: I9557b184df7f753a442c7e0ceb58e81c5e19f2c5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26338 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22cbfs-compression-tool: Add raw compression supportJulius Werner
This patch adds a new "rawcompress" command to cbfs-compression-tool, that works exactly the same as "compress" except that it doesn't add the custom 8-byte header to the file. This can be useful if you need to compress something into a format that coreboot's decompression routines can work with, but it's not supposed to go into CBFS. Change-Id: I18a97a35bb0b0f71f3226f97114936dc81d379eb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22Revert "program_loading: make types a mask, make unknown type a non-zero"Julius Werner
This reverts commit f3d99b6a657fe2bc3cff71956ab4f68fd1f287fe. Reason for revert: We're now doing this through CBFS types instead, so this shouldn't be needed anymore. Change-Id: I9e0d5446365f8ecc045615e4ba1a1313080c9479 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26448 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-21Revert "acpi: device: Walk up the tree to find identifier"Duncan Laurie
This reverts commit 8ccf59a94778fb54cc08368fb58a42b64d9489f6. This wasn't meant to be submitted yet and seems to be causing issues, just as Patrick warned me.. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I8c4b57ba92ef4e0535e4975485188114a1084f09 Reviewed-on: https://review.coreboot.org/26452 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-21nb/amd/amdk8: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If540a8b0afb93c1ba8e901c4771228a43c1e6a14 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/sis/sis966: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I6002949fa90a46a2dd0e3519acbf2606bb679322 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21nvidia/mcp55: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I48ab6d77be0201ac7b49b26e0366b6e3a1e5ac52 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/via/vt8237r: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ic4137bc4008d08e0e0d002e52c353fc29355ccb1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/via/k8t890: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I2ff065c863a9d2b480f7432c6280ef59917c8863 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26396 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-21sb/amd/cs5536: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I995981fbaaf8c22889920a81faae631b3fd3b2ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/amd8151: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Id8a5043015806d8a433a948fc1889ee867ca3aeb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/amd8132: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ia4be6e9b81fe4627d84c9ed7589a3e6ef2bcede2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/amd8131: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iac87af2f1a1e331fee70b89548a0d6bbc5839ea0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/amd8111: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I143617bb1a4ab1812ec50155861ae2f75060851b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21nb/via/cx700: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iaca908cc9ba5d11468a97d2f43911db925b93f1e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/sb800: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ie48b42cf2999df075e23dc8ba185934b4e600157 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/sb700: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I53acc7dd4ddf2787fc1e59d604cadc4f3b4cb49c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/sb600: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I587b32e33af72a37be8299b9db2ce26ba825a689 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21sb/amd/rs690: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I818f808e1cd8b156158251724352f8be6041030c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-21google/kahlee: Reduce UMA memory to 32MBMarshall Dawson
Lower the amount of UMA memory to 32MB at AMD's request. TEST=none BUG=b:79906569 Change-Id: Ib1365dc38850b4b92c944ff95534573addbe4362 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/26383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>