summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-11soc/intel/uart: Drop SoC callback `soc_uart_console_to_device`Furquan Shaikh
This change renames `struct uart_gpio_pad_config` to `struct uart_controller_config` and adds a new parameter devfn (which expects devfn for the UART controller corresponding to the index in PCI_DEVFN() format). This gets rid of the SoC callback to get `struct device` pointer to the UART controller device. Change-Id: Id0712a0038f2cc1a61b8b5a58fa155f14e7949a5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49212 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cnl: Allow setting PCIe subsystem IDs after FSP-SJeremy Soller
Prevent the FSP from writing its default SVID SDID values of 8086:7270 for internal devices as this locks most of the registers. Allows the subsystemid values set in devicetree to be used. A description of this SSID table override behavior, along with example code, is provided in the TigerLake FSP Integration Guide, section 15.178 ("SI_CONFIG Struct Reference"). The xHCI and HDA devices have RW/L registers rather than RW/O registers. They can be written to multiple times but cannot be modified after being locked, which happens during FspSiliconInit. Because coreboot populates subsystem IDs after SiliconInit, these devices specifically must be written beforehand or will otherwise be locked with their default values of 0:0. Tested by checking lspci output on System76 galp3-c (WHL), oryp5 (CFL), and oryp6 (CML). References: - TigerLake FSP Integration Guide - Intel Document Number 337868-002 Change-Id: Ieaa45ef7fa8e0da4a25b9174ded1ea0c5d9c4b4e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49104 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/volteer: Set FORCE_PWR low at boot timeJohn Zhao
While FORCE_PWR is set high, it prevents retimer from entering low power state. S0ix failure occurs while USB4 Gatkex is connected on Port-0. This change sets FORCE_PWR(GPP_H10) low. This FORCE_PWR GPIO will be toggled by kernel through DSM method while updating retimer firmware. BUG=b:174166586 Cq-Depend: chromium:2594438 TEST=Verifed s0ix cycles with USB4 Gatkex connected on Port-0. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ie4b442e1078379c522a94bfdc00cd99e6f9b8170 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11soc/amd/picasso: Separate GPIO define into gpio_defs.hEric Lai
Separate GPIO define into gpio_defs.h, then we can use it in asl include. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If2a779eae228f621e77610889205853de2fb179a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-11vc/intel/FSP2_0/CPX-SP: update to FSP ww01 releaseJonathan Zhang
With Intel CPX-SP FSP ww01 release, CidBitMap field is added to DimmDevice struct in hob_memmap.h. The copyright statements were updated to accomodate year 2021. gpio_fsp.h is not needed any more as coreboot takes over GPIO configuration. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I3242c8b50401757a28de8a9e9c71fb95bc0515dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/49246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-11vendorcode/intel/fsp: Update Tiger Lake v3444 FSP HeadersSrinidhi N Kaushik
Update v 3444 FSP headers for Tiger Lake platform to include the below 2 UPDs to control TC cold support usb connect or not. FSPS: Usb3ComplModeEnable DisableTccoldOnUsbConnected BUG=b:173054070 TEST=Build and boot on delbin. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I68b32730293fc83b5088074f71fa215220574748 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11mb/emulation/qemu: Copy page tables to DRAM in assemblyPatrick Rudolph
To work around various bugs running KVM enabled, copy page tables to DRAM in assembly before jumping to x86_64 mode. Tested on QEMU using KVM, no more stange bugs happen: Tested on host - CPU Intel(R) Core(TM) i7-7700HQ - Linux 5.9 - qemu 4.2.1 Used to crash on emulating MMX instructions and failed to translate some addresses using the virtual MMU when running in long mode. Tested on host - CPU AMD EPYC 7401P 24-Core Processor - Linux 5.4 - qemu 4.2.1 Used to crash on jumping to long mode. Change-Id: Ic0bdd2bef7197edd2e7488a8efdeba7eb4ab0dd4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-11mb/google/dedede/var/magolor: Remove the unused touch controllerRen Kuo
Remove unused touch controller - Goodix BUG=None BRANCH=dedede TEST=build firmware Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I2a01666bc1e353e21ddf961a0eb721a0cb4013db Reviewed-on: https://review.coreboot.org/c/coreboot/+/49221 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cannonlake: Enable wake from USB in S4Patrick Rudolph
The xHCI controller supports waking the system from S1-S4. Thus specify that the deepest sleep state is S4 in _PRW. Tested on Prodrive/hermes. The board now wakes from S4 as well by pressing a key on the USB keyboard. Change-Id: I0bb266e70ee6b4eb8922671b7d0078db0d29a1da Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49224 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10nb/intel/gm45: Guard macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: I023bb116fa2bdcaa7cfdce2445513da3959e827d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45435 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10nb/intel/gm45: Guard `CxDRBy_BOUND_SHIFT` macro parametersAngel Pons
Wrap `r` in parentheses to avoid unexpected behavior with compound expressions. This prevents `CxDRBy_BOUND_MB(r+1, base)` from triggering undefined behavior when `r = 2`, as the shift would be greater than 32. Change-Id: I14235b2708ab502d842da677451c14203a469b45 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49261 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10device: Add new Kconfig VGA_ROM_RUN_DEFAULT for mainboard userSubrata Banik
Platform can now select VGA_ROM_RUN_DEFAULT Kconfig to perform graphics initialization for PCI-E based discrete card through VGA OpRom (SoC or Mainboard user can't select VGA_ROM_RUN directly because it's part of choice option). (Note: Some payloads, like SeaBIOS, are also able to run Option ROMs, so coreboot does not need to enable VGA_ROM_RUN Kconfig) For payload like depthcharge, create VGA_ROM_RUN_DEFAULT Kconfig for mainboard to select design with DGPU where OpROM is embedded inside the DGPU card. Allow auto selection of VGA_ROM_RUN_DEFAULT from VGA_BIOS Kconfig. Also NO_GFX_INIT Kconfig to avoid running VGA_ROM_RUN by default in case SeaBIOS is used. TEST=Able to get Pre-OS splash screen with AMD Radeon RX 5700 PCI-E DGPU when mainboard user selects VGA_ROM_RUN_DEFAULT. Change-Id: Iecb2fcdb105af449bc20ad727759cdef17d5e376 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49016 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/intel/adlrvp: Update GPIOs as per latest schematicsSubrata Banik
1. GPP_D8, GPP_H23 => Remove unused GPIOs 2. GPP_E18 .. GPP_E22 => Program the correct Native Functions for GPIO Change-Id: Iedb1f8fbf5f96a9617b72ba1a6419e3fd4e331b4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49260 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/intel/adlrvp: Fix FW download failed for PEG 060, 010Subrata Banik
Enable PCIE RP1 to fix DEKEL FW download failed for x4 controller (PEG 0:6:0). Enable PCIE RP3 to fix HSPHY FW download failed for x8 controller (PEG 0:1:0) BUG=b:176940923 TEST=No FSP error seen while loading DEKEL, HSPHY FW. Change-Id: I3cd8cba02a96185803a0c0d442f3d6aa495d2642 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-10soc/intel/alderlake: Refactor SoC code to maintain CPU and PCH PCIE RPsSubrata Banik
List of changes: 1. Create new Kconfig MAX_CPU_ROOT_PORTS and MAX_PCH_ROOT_PORTS as per EDS. 2. Add new chip variable to enable/disable CPU PCIE RPs from mainboards. 3. Rename PcieRpEnable to PchPcieRpEnable. 4. Enable CPU RPs as below in mainboard devicetree.cb RP1: PEG60 : 0:6:0 : CPU SSD1 RP2: PEG10 : 0:1:0 : x8 CPU Slot RP3: PEG62 : 0:6:2 : CPU SSD2 Change-Id: I92123450bd7cfb2e70aae8de03053672a7772451 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49136 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/broadwell: Use `mp_cpu_bus_init`Angel Pons
This is needed to allow switching to Haswell CPU code in the future. Change-Id: Ic642f32f9c4a269a66ac470b7a7217f20ff8bfba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46886 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10superiotool/nuvoton: Set NCT6791D GPIO inputs to NANANico Huber
There were several default values given for GPIO data and status registers. As all GPIO are configured as inputs by default, we can't predict the values of these registers, hence set their default values to NANA. Change-Id: I0507dd75e0f2a5c7e4d2e9cdbe1f860b544deac3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Clay Daniels <clay.daniels.jr@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-10cpu/intel/haswell/haswell.h: Align with BroadwellAngel Pons
Sort MSR definitions, move MCHBAR registers to northbridge and relocate C-state latency macros into the header. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3b02f1b1eff522c037e6fc8bb0d831423913da29 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46914 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10cpu/intel/haswell: Align cosmetics with BroadwellAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3eb522a48edf9e8fc7664141253ae4e2072d71fa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46913 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10cpu/intel/haswell: Do not determine CPU type at runtimeAngel Pons
It is already known at compile-time. Change-Id: I20303cd1f79b71268a9d734c85a1291afe9177e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46912 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel/bd82x6x: Use `PCH_LPC_DEV` macroAngel Pons
Change-Id: I681bb126546b5a7bda3f1bac05c345d2cf60b178 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-10util/autoport: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Change-Id: Ia8d7083ca2f21abbb5f184c1b55dcf1bf047a7be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-10mb/google/cyan: Move board_id() to mainboard_fill_gnvs()Kyösti Mälkki
Only a google/cyan variant evalutes BDID in ASL. Change-Id: I3d839333333b4762ae5350734c85471a3c12838a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Add missing include in nvs.hKyösti Mälkki
Change-Id: Ic779a668ebaa4f0c9bdef95fd6de8f0179e8a534 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49004 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Rename to soc_fill_gnvs()Kyösti Mälkki
Replace acpi_create_gnvs() under soc/ to reflect their changed funcionality. Change-Id: I7bdbe0d6f795252e713e9785ada2b6320e6604b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48717 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Replace acpi_init_gnvs()Kyösti Mälkki
Rename these to soc_fill_gnvs() and move the callsite away from mb/. Change-Id: I760c36f65c6122103f2be98fc11ee13832c2772e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48716 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel: Use acpi_inject_nvsa()Kyösti Mälkki
Change-Id: I5f1762c4a25631af9d29a2cb038620d9e9698f8b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48715 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel: Factor out soc_fill_gnvs()Kyösti Mälkki
Name the common part of GNVS initialisation as soc_fill_gnvs(). It is also moved before the call to acpi_create_gnvs(), which followup will rename to mainbord_fill_gnvs() to reflect that implementation is under mb/. Change-Id: Ic4cf1548b65a86212d6e45d460fcd23bb8036365 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48706 Reviewed-by: Lance Zhao Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Replace uses of CBMEM_ID_ACPI_GNVSKyösti Mälkki
Change-Id: I45a2d9cb7f07609a1ff03fd70f17c3f2d4f013b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48705 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/braswell: Refactor acpi_init_gnvs()Kyösti Mälkki
Move GNVS details to different function, called from acpi_create_gnvs(). Change-Id: Ief02c078fe37753c0d29418394a351105a1aacc8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48704 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Move EC_RW detectionKyösti Mälkki
These boards without ChromeEC do not set ACTIVE_EC_RW flag as part of the gnvs_assign_chromeos() function. Create abstraction to avoid <vendorcode/chromeos/x> include. Change-Id: Ic6029e1807fcfe7dd2c766ce8221e347b6b096f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48777 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant ChromeOS setup for GNVSKyösti Mälkki
Already done in common gnvs_get_or_create() implementation once gnvs_chromeos_ptr() is defined for platforms. Change-Id: I90fa2bc28ae76da734b3f88be057435aed9fe374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant CONSOLE_CBMEM setup in GNVSKyösti Mälkki
Already done from common gnvs_get_or_create() implementation after gnvs_cbmc_ptr() is defined. Change-Id: I77c292cd9590d7fc54d8b21ea62717a2d77e5ba4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48702 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant CBMEM_ID_ACPI_GNVS allocationsKyösti Mälkki
Allocation now happens prior to device enumeration. The step cbmem_add() is a no-op here, if reached for some boards. The memset() here is also redundant and becomes harmful with followup works, as it would wipe out the CBMEM console and ChromeOS related fields without them being set again. Change-Id: I9b2625af15cae90b9c1eb601e606d0430336609f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48701 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-09mb/google/parrot: Replace while-loop with do-whileFelix Singer
Fixes linter error complaining about trailing semicolon. Change-Id: I3f74f25cb2e3edcdd509abd86d80098241c05741 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/google/parrot: Let else statement follow closing braceFelix Singer
Fixes a linter error. Change-Id: I1302e32b0d52e37d9cb4503128edc7d1df1c3bd8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/google/parrot: Get rid of hard-coded function names in printksFelix Singer
Instead of hard-coding function names in strings, use the __func__ constant for better maintainability. Change-Id: I151560cd5a135e00f494eda3f9d3b592ee9d984a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-09mb/google/parrot: Fix spacing issuesFelix Singer
Add a space after each comma to fix linter issues. Change-Id: I5533c4fc7aa0e986da4350ec56b84903b3111a07 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/hp/pavilion_m6_1035dx: Replace leading spaces with tabsFelix Singer
Replace leading spaces with tabs so that linter doesn't complain. Also, remove an unneeded empty line. Change-Id: I5809c1ca13782393cb4c4051a7061186c1c144e4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-09mb/hp/pavilion_m6_1035dx: Replace (foo*) with (foo *)Felix Singer
Change-Id: Iff38caf5f4a4d25f4bafdd821c51de24f54e3ce5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/hp/pavilion_m6_1035dx: Put opening braces in previous lineFelix Singer
Put opening braces in previous line to fix linter errors. Change-Id: I7bd49393056f80ce4f6078c646db46c2a67f2381 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49234 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-09mb/hp/pavilion_m6_1035dx: Remove trailing semicolon from macroFelix Singer
Macros should not use a trailing semicolon. Change-Id: Ibbcd589c7afa72e9e468e5f4b557bb2c665bbec0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-09mb/hp/pavilion_m6_1035dx: Fix spacing issues in mptable.cFelix Singer
Align the bytes of picr_data[] and intr_data[] with 8 bytes per line and add spaces after commas so that the linter doesn't complain. Also, remove spaces before the postfix '++' operator. Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I90bec7fdfabca6f8afd1508c673241e0742e2ee9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49191 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-09vc/intel/fsp1_1/skylake: Remove unused header fileFelix Singer
Change-Id: I329a1484cbd16296a2aa047876c2506c74d4452d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-09mb/asrock/h110m: Drop VR configuration from devicetreeFelix Singer
Drop VR configuration since it matches the platform defaults. Change-Id: I92007f4ff9d093c9573bb1ee13e64eb2f38af4f4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-09mb/asrock/h110m: Remove zeroed options from devicetreeFelix Singer
Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: Ic39b4c70ccb9ec21780c937322d63820064abbd1 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49185 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/volteer: Configure Delbin USB2 ports for Type CJohn Zhao
Two USB2 ports 4 and 9 are assigned to type C connectors on Delbin board. This update configures these USB2 ports for Type C which will allow USB2 port reset message upstream from PCH to CPU to recover a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Booted to kernel on Delbin board and verified usb2 port reset message enable bits through pch xhci_mmio_base + R_XHCI_MEM_U2PRM_U2PRDE where the offset register R_XHCI_MEM_U2PRM_U2PRDE has value 0x92f4. Validated various USB3 devices enumeration. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Idb3ce949e1ecf3adc7615e0af79a38a0cc9be18f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49202 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08util/amdfwtool,post: add missing distclean targetFelix Held
Without this target some spurious errors occurred when running make distclean at the top level of coreboot. Change-Id: I3d3061b386fc5b4a043cfc7ff8fd3c0da33c0e83 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49227 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/amd/picasso: add missing GNB I/O APIC initializationFelix Held
Change-Id: Iddb0c20e769e6921ba5d0dd4a84ab9e494d522e1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48269 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08amd_blobs: Advance pointer for picasso FSP 0x25Marshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I2aa5f353432cd8f79005153a06ac35c1e654f6f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08mb/google/octopus: add audio codec into SSFC support for BobbaMarco Chen
BUG=b:174118027 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Marco Chen <marcochen@google.com> Change-Id: Id37c4c5716ade0851cfcb24e12b390841e633ac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-08mb/google/asurada: Support audioTzung-Bi Shih
- Turns audio-related things power on. - Selects I2S pin-muxing. - Exposes GPIO "speaker enable" for switching on and off. BUG=b:176856418 Signed-off-by: Tzung-Bi Shih <tzungbi@chromium.org> Change-Id: If595657bbddad85bc9a154b3648bae1190cb00b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-08mb/google/dedede/var/sasuke: Add internal USB camera supportSeunghwan Kim
This change adds internal USB camera into devicetree for sasuke BUG=None TEST=Built and checked camera device existence with lsusb Change-Id: I51b9bb174205d984f1d060afd603f1d087095645 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49162 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/dedede/var/sasuke: Enable ELAN touchpadSeunghwan Kim
This change adds ELAN touchpad into devicetree for sasuke. BUG=None TEST=Built and verified touchpad function Change-Id: If9c25f23ee1c0e88382fff036f77a6753775b81e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede/var/sasuke: Enable audio featureSeunghwan Kim
This change adds DA7219 audio codec and MAX98360A amplifier for sasuke. BUG=None TEST= Built and heared speaker sound on OS Change-Id: Ib48eb74fbfe171d46d0d23859057ba169b56bde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede/var/sasuke: Configure GPIO NC padsSeunghwan Kim
Configure GPIO NC pads for sasuke. BUG=b:172104731 TEST="FW_NAME=sasuke emerge-dedede coreboot" Change-Id: I3bf8f97708536010da82402ea3d49e387e732d61 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/asrock/h110m: Drop DEVICETREE from KconfigFelix Singer
Drop DEVICETREE from Kconfig since it matches the default value. Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: Idbcd49cca6494ae2da0f364c24638d7ca11911da Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-01-08mb/clevo/cml-u: Drop VGA_BIOS_FILE from KconfigFelix Singer
It doesn't make sense to configure that filename in Kconfig, since the filename can be changed by the user. So remove it. Change-Id: I3eed05637da29096bc1d134505d7335db5db1439 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49138 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08tests: Add lib/fmap-test test caseJakub Czapiga
Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I885ea05d509d3b1330de7a18531f310d290c6965 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-08ec/google/chromeec: add SSFC CBI supportMarco Chen
An API is added to get SSFC value from cros EC. BUG=b:174118027 BRANCH=octopus TEST=check SSFC value from EC is correct compared to value in CBI Change-Id: Ifd521514bbc2e90c789f3760b72e8326e614e2b1 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-08soc/intel/common/uart: Restrict scope of uart_common_init to uart.cFurquan Shaikh
uart_common_init is not used outside of soc/intel/common/block/uart.c. This change restricts the scope to this file and drops the declaration from uart.h Change-Id: I499a53506f9b2e91ecc7334bf9b023d342e802fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49211 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel/common: Pass in pci_devfn_t into lpss_set_power_stateFurquan Shaikh
This change updates the parameter passed into `lpss_set_power_state()` from struct device * to pci_devfn_t. This allows the users in the early stages to use pci_devfn_t instead of having to walk the device tree to get a pointer to the relevant device structure. It is important for optimizing out unnecessary components of the device tree from the early stages. Change-Id: Ic9e32794da65348fe2a0a2791db47ab83b64cb0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49210 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel: Drop `dev` parameter from soc_get_gen_io_dec_range()Furquan Shaikh
This change drops the parameter `struct device *dev` from the function `soc_get_gen_io_dec_range()`. This function uses the parameter dev to get a pointer to config structure for extracting the decode ranges configured by mainboard in device tree. However, there is no separate chip driver for the LPC device which means that the SoC code can use `config_of_soc()` to get to SoC chip config instead of using the LPC device. This change is being done in preparation to clean up the device tree/chip config access in early stages that allows for optimizing the inclusion of device tree elements in the early stages. Change-Id: I3ea53ddc771f592dd0ea5e5e809be2d2eff7f16d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08cpu/x86/smm: Use append instead of assign for smm-c-depsFurquan Shaikh
This change uses append operation (+=) instead of assignment (:=) for smm-c-deps to ensure that any earlier assignment is not overwritten. Change-Id: Ic1d62b414cfe3f61ee2b80b026b7338faa186904 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08soc/intel/tigerlake: Enable USB2 port reset message on Type-C portsJohn Zhao
USB3 is in CPU and USB2 in PCH on Tigerlake. Cross die messaging is implemented between CPU and PCH through the IOSF SB bridge. a PCH xHCI USB2 port reset event issued by the xHCI driver shall trigger a message upstream to CPU to wake it from the low power state which allows a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Built and booted to kernel on Voxel board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I672f30a117980bc10bd71e9b77c5fa76286b9f5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49052 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08util/testing: remove genprof targetFelix Held
commit 8c99c27df10f6c5a120e41ffb0948e357f5a2d20 removed util/genprof, so it needs to be dropped here as well to avoid spurious breakages of the build. Change-Id: I420b5c43e2d97373a8e665f457463a06e16ecfb9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49226 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08ec/google/chromeec: Check AP reset cause for watchdog resetYu-Ping Wu
Different from mt8183, mt8192 doesn't need to trigger EC reboot on HW initiated watchdog reset. Therefore, ec_reset_flags cannot be used to determine AP watchdog reset. Instead we check the cause of the last AP reset. BUG=b:174443398 TEST=emerge-asurada coreboot TEST=crash.WatchdogCrash passed on asurada BRANCH=none Cq-Depend: chromium:2607150 Change-Id: I761ecdd8811e5612b39e96c73442cc796361d0f0 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49113 Reviewed-by: Nicolas Boichat <drinkcat@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08ec/google/chromeec: Update ec_commands.hYu-Ping Wu
This change copies ec_commands.h directly from the Chromium OS EC repo at SHA afffc28f2, with the exception of changing the copyright header to SPDX format. Change-Id: Ie02e0295312050e803a7d701ec4eed1dadfa6c9a Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-08cpu/intel/model_206ax: Always return a package from _CSTAngel Pons
The _CST method is supposed to return a package. If a mainboard used zero for all ACPI C-states, the generated _CST would return nothing, which is invalid. Instead, return a package with no C-state entries. This change is a no-op, since all mainboards have at least one valid ACPI C-state. This is what `acpigen_write_CST_package()` does, too. Change-Id: I1f531e168683ed108a8d6d03dee6f5415fd15587 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49092 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08sb/intel/bd82x6x: Remove space in function definitionAngel Pons
Just a small change to follow the code style. Change-Id: Ie838b82e12627478ea721f426efc4d557feb6ae3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49166 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/volteer: Update copano device treehao_chou
Update device tree override to match schematics. BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I1fb006d750bb2d670885ec8ccc627436c5078072 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-08mb/google/volteer: Add GPIO to copano supporthao_chou
Add support for gpio driver for copano BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I1e0f730c9865ed77c7071245b071315a9c6ea4c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48951 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/volteer: Copano: Update SPD tablehao_chou
Add memory table to "mem_list_variant.txt", and command to generate files: go run ./util/spd_tools/lp4x/gen_part_id.go src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/copano/memory/ src/mainboard/google/volteer/variants/copano/memory/mem_list_variant.txt DRAM Part Name ID to assign MT53D512M64D4NW-046 WT:F 0 (0000) H9HCNNNCRMBLPR-NEE 0 (0000) MT53D1G64D4NW-046 WT:A 1 (0001) H9HCNNNFBMBLPR-NEE 2 (0010) BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I2ace17e8fff12d3f5de15a35f609265d8b6ed6b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48948 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/zork: Unmap FCH IO-APIC PCI interruptsRaul E Rangel
Now that the _PRT generates a GNB IO-APIC routing table we no longer need to route the PCI interrupts through the FCH IO-APIC. This change unmaps the IRQs since they are no longer used. BUG=b:170595019 TEST=Boot with `pci=nomsi amd_iommu=off` and verify /proc/interrupts Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3467934bfcac14311505bec49a12652490554e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08soc/amd/picasso: Generate GNB IO-APIC PCI routing tableRaul E Rangel
This adds support for generating a PCI routing table that routes to the GNB IO-APIC. This means we no longer need to route to the FCH IO-APIC for PCI interrupts. BUG=b:170595019 TEST=Boot ezkinil to OS with `pci=nomsi amd_iommu=off` and verify all peripherals are working CPU0 CPU1 0: 112 0 IO-APIC 2-edge timer 1: 0 99 IO-APIC 1-edge i8042 4: 0 2523 IO-APIC 4-edge ttyS0 5: 34632 0 IO-APIC 5-fasteoi mmc1 7: 5646 0 IO-APIC 7-fasteoi pinctrl_amd 8: 0 0 IO-APIC 8-edge rtc0 9: 0 33 IO-APIC 9-fasteoi acpi 10: 88258 0 IO-APIC 10-edge AMD0010:00 11: 0 32485 IO-APIC 11-edge AMD0010:01 24: 3301 0 amd_gpio 3 cr50_i2c 25: 0 235214 IO-APIC 28-fasteoi amdgpu 26: 67408 0 IO-APIC 31-fasteoi xhci-hcd:usb1 27: 0 488876 IO-APIC 8-fasteoi mmc0 28: 1265 0 amd_gpio 9 PNP0C50:00 29: 656 0 amd_gpio 12 ELAN9004:00 30: 413 0 amd_gpio 31 chromeos-ec 31: 14153 0 IO-APIC 4-fasteoi ath10k_pci 32: 2 0 sysfstrig0 cros-ec-accel_consumer3 33: 2 0 sysfstrig0 cros-ec-accel_consumer0 34: 6 0 amd_gpio 62 rt5682 35: 0 38937 IO-APIC 29-fasteoi snd_hda_intel:card0, ACP3x_I2S_IRQ Cq-Depend: chrome-internal:3452710 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3211ab351a332fafb7b5f9ef486bb6646d9a214c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08pineview boards: Drop MAINBOARD_HAS_NATIVE_VGA_INITAngel Pons
Already selected from northbridge Kconfig. Change-Id: I5a30769b4186041a15fd1264bb0d6efa32cb6eb4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49182 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08arch/x86/Makefile.inc: Clean up generated assembly stubsArthur Heymans
At the moment neither verstage nor romstage has a generated assembly stub. This was used when CAR was set up in romstage which is not the case anymore. Change-Id: Ia4a952f269cc2b3edf1290c80b7a63619c8c6c95 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08payloads/external: Update cbfs-ints with CONFIG_UPDATE_IMAGEArthur Heymans
Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08*/Makefile.inc: Add some INTERMEDIATE targets to .PHONYArthur Heymans
Change-Id: I125e40204f3a9602ee5810d341ef40f9f50d045b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48897 Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08util/crossgcc/.gitignore: Add cmakeArthur Heymans
Change-Id: I5ce346515f4468699396e214acfaa3b62f6d891d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08ec/system76/ec: Remove unused EC RAM fieldsJeremy Soller
These fields were originally added for compatibility with the proprietary ITE EC firmware, but the System76 EC firmware does not use them. Take the opportunity to document most of the fields as well. Change-Id: I5581437c67ec67705ce16ba20254183a0261fd83 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08cbfstool: Use flock() when accessing CBFS filesJulius Werner
Trying to do multiple operations on the same CBFS image at the same time likely leads to data corruption. For this reason, add BSD advisory file locking (flock()) to cbfstool (and ifittool which is using the same file I/O library), so that only one process will operate on the same file at the same time and the others will wait in line. This should help resolve parallel build issues with the INTERMEDIATE target on certain platforms. Unfortunately, some platforms use the INTERMEDIATE target to do a direct dd into the CBFS image. This should generally be discouraged and future platforms should aim to clearly deliminate regions that need to be written directly by platform scripts with custom FMAP sections, so that they can be written with `cbfstool write`. For the time being, update the legacy platforms that do this with explicit calls to the `flock` utility. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I022468f6957415ae68a7a7e70428ae6f82d23b06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-08mb/google/dedede: Enable "FastPkgCRampDisable" upd for noise mitigationMaulik V Vaghela
As part of acoustic noise mitigation calibration, we need to enable FastPkgCRampDisable upd along with slew rate = 1. This values has been derived based on noise calibration done. Please refer document 575216 for procedure. BUG=None BRANCH=dedede TEST=correct value has been programmed and slew rate measurement is correct on scope. Change-Id: Ie42c8ab647ff42fa043b6f717a9834f9b9c551f6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-08soc/intel/jasperlake: Update acoustic noise related parametersMaulik V Vaghela
We need to fill Acoustic noise mitigation related UPDs only in case when acoustic noise mitigation is enabled. This will also clarify the user that they need to enable Acoustic noise mitigation while using this config in mainboard. We're only filling UPD for domain VR index 0 since there is only one VR domain for JSL (VCCIN VR). Reference: JSL EDS (Document# 613601) (Chapter 3.4) BUG=None BRANCH=dedede TEST=UPD values are getting filled correctly when Acoustic noise mitigation is enabled. Change-Id: I0cf4ccfced13b0d32b3d20713eace63e66945332 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-08soc/intel/jasperlake: Enable USB2 PHY SUS PG for s0ix qualificationKrishna Prasad Bhat
USBSUSPGQDIS is a disqualifier bit which will allow platform to enter s0ix even if USB2 PHY SUS is not power gated. Disabling this bit will ensure that USB2 PHY SUS is power gated before entering s0ix. BUG=b:175767084 BRANCH=dedede TEST=s0ix works on drawcia and USB wake from s0ix works fine. Change-Id: I20bad3f79141799c88a16272ea822b9e3dede504 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-07ACPI: Remove ACPI_NO_SMI_GNVSKyösti Mälkki
This was used as a guard to not raise SMI with APM_CNT_GNVS_UPDATE. The handler has been removed now completely. Change-Id: I7726367fd16630aa4b4b25b24b05f740645066db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-07soc/amd/picasso: Add GRXS and GTXS methodEric Lai
Add GRXS and GTXS into gpiolib. We can align with Intel ACPI method for the better usage. This benefits acpi.c to be more clear, too. BUG=b:176270381 BRANCH=zork TEST=Confirm the Goodix touchscreen functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I1aa6a8f44f20577e679336889c849dd67cb99f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/48944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-07soc/amd/picasso: Add STXS and CTXS methodEric Lai
Add STXS and CTXS into gpiolib. We can align with Intel ACPI method for the better usage. This benefits acpi.c to be more clear, too. BUG=b:176270381 BRANCH=zork TEST=Confirm the Goodix touchscreen functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If4fcd68496a712fdccf44b91a6192ef58a0a9733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48943 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/zork: Decrease stamp_boost parameter for dirinbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I44f086af6b5dd552efd2bd1ef4db0d69b652826d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-07security/intel/txt: Don't run SCHECK on CBnTArthur Heymans
This functionality only exists on legacy TXT. Change-Id: I4206ba65fafbe3d4dda626a8807e415ce6d64633 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07mb/google/dedede: Add support for charger throttlingSumeet Pawnikar
Add charger current throttling support for dedede baseboard BUG=None BRANCH=None TEST=Built and tested on boten system Change-Id: I79edba579249111294a982590660196f05be7eaf Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07arch/x86: Move prologue to .init sectionKyösti Mälkki
For arch/x86 the realmode part has to be located within the same 64 KiB as the reset vector. Some older intel platforms also require 4 KiB alignment for _start16bit. To enforce the above, and to separate required parts of .text without matching *(.text.*) rules in linker scripts, tag the pre-C environment assembly code with section .init directive. Description of .init section for ELF: This section holds executable instructions that contribute to the process initialization code. When a program starts to run, the system arranges to execute the code in this section before calling the main program entry point (called main for C programs). Change-Id: If32518b1c19d08935727330314904b52a246af3c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47599 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07cpu/intel/haswell: Rename `HASWELL_BCLK` to `CPU_BCLK`Angel Pons
This is just to ease merging with Broadwell. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I9239489fe48f04714e6626b57ef07ca8b3013024 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46910 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/asrock/h110m: Remove MAINBOARD_POWER_ON_AFTER_POWER_FAILMartin Roth
The MAINBOARD_POWER_ON_AFTER_POWER_FAIL symbol was removed in Commit 9faae2b939. The default is currently to keep power off after a power failure. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ib2ef450f5c64f663b9aa88f8870250e92898e308 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47671 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07soc/intel/icelake: Remove unused ENABLE_DISPLAY_OVER_EXT_PCIE_GFXSubrata Banik
Mainboard user can select VGA_ROM_RUN_DEFAULT Kconfig hence no need to have another ENABLE_DISPLAY_OVER_EXT_PCIE_GFX Kconfig to load/execute VGA OpRom. Change-Id: Id87f82d9c3657afad9db94b1ec0917121edfe2bb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/volteer/var/elemi: Tune i2c frequencyWisley Chen
Tuning i2c frequency for elemi I2C0: 396.6 KHz I2C1: 395.9 KHz I2C5: 397.1 KHz BUG=b:176794161 BRANCH=volteer TEST=emerge-voleteer coreboot, and measure i2c clock. Change-Id: I23b04a9b5ff8873d9de12e762e8e2786ef474ac0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-07mb/google/dedede/var/metaknight: update Goodix touch screen sequenceTim Chen
Update Goodix touch screen reset delay time to 180ms. BUG=b:176213670 TEST=Build and boot Metaknight to OS. Change-Id: I5801a36fb7c03b23046df16b1eaf4c548241bba5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/zork: Modify variant to Shuboz supportKane Chen
1. Add ELAN touchscreen/touchpad to overridetree.cb 2. Follow Dalboz setting to add variant.c BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ic3193ca7957251841e75a7e5c7a16fc5047919fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48001 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/intel/jasperlake_rvp: Fix building with CONFIG_CHROMEOS unsetMatt DeVillier
Make EC_GOOGLE_CHROMEEC_SWITCHES depend on VBOOT, rather than force selecting it. Change-Id: If96b2a935d2f7388a24be7d8e65c7dfc2c89a0fc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 23:27:20 +0000