summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-25gizmosphere/gizmo: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I26e2450babfde1580e0e794c519344112d4019ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25pcengines/apu1: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I10b3e53a5e39764e3b199561d07391779804407c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/beltino: fix LED polarity for mccloud variantMatt DeVillier
The LED polarity was set incorrectly, fix using values derived from original Chromium sources: branch firmware-mccloud-5827.B, ToT src/mainboard/google/mccloud/smihandler.c src/mainboard/google/mccloud/romstage.c TEST: boot google/mccloud, observe power LED on normally, blinking in S3/S4, and off in S5. Change-Id: Ia1f63eebbccb48fcf8543188db390b23045d843e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/cyan: Increase RO coreboot size on flashMatt DeVillier
Commit 05627831826cab096789bd19f004b33a4cd70c0e applied this change to other Google boards, but cyan was left out. Bring cyan in line with other Google boards. Change-Id: Id86bea538a7b82367ea6ddbd3fe3efb1b1c0078d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-25google/cyan: Remove support for pre-EVT boardMatt DeVillier
Cleaning up code to remove support for pre-EVT rev of cyan board. Analogous to what was done for intel/strago in commit 103f00d. Change-Id: I29b32da8064e0743cc9c5df02ce7d3441459ee8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Use GpioInt for Keyboard IRQJagadish Krishnamoorthy
Cherry-pick from Chromium commit a162348. Remove the hard coded IRQ number for the keyboard interrupt. IRQ number can change based upon the gpio bank index ordering. Hence pass the gpio bank and index number so that kernel calculates the IRQ number. Original-Change-Id: Icfe5c3995007164bf617575b541758c18ee63a1d Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81ff19e3060c533ee76023c7651f741294e9db30 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable L1 sub stateT.H. Lin
Adapted from Chromium commit dc59188. Disable L1 sub state to prevent WiFi randomly disappear condition. Original-Change-Id: I8975bb4bbbc2fc89b91b06ae02716367890c672d Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Rajat Jain <rajatja@chromium.org> Original-Reviewed-by: Vincent Wang <vwang@chromium.org> Oriignal-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Change-Id: I51a1bcca6431e6bc28baf9b09433cec13db925c3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/braswell: Put SERIRQ in quiet modeHannah Williams
Cherry-pick from Chromium commit 1568761. Original-Change-Id: If459c3cab8fb7ca13d8bff3173a94855ec2e2810 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Kevin K Wong <kevin.k.wong@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Aseda Aboagye <aaboagye@chromium.org> Change-Id: Ibb2e6d316adcfcc0d56d242501aac9c4c0bbdf62 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/braswell: Populate NVS SCC BAR1Hannah Williams
Cherry-pick from Chromium commit f92d7be. This BAR is used in _PS0 and _PS3 methods and is used by kernel driver to put SD controller in D3 Original-Change-Id: Iae4722cb222f61e96948265f57d6b522065853d9 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Aseda Aboagye <aaboagye@chromium.org> Change-Id: I59973226d57fe1dc3da21b2cec1c7b9a713829ab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory 2-channel 4G (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 7f0cdf0. Cyan board add 4G DDR3L 2nd source memory (Micro/Samsung) Original-Change-Id: I12f82082d8227e61a97ce0a001d7d2b1f6613e06 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ieca7201346414d7a962f9619dbe846c67c0f02d6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 3b578ef. Cyan board use new 2nd source memory (Micro/Samsung) Original-Change-Id: I6f4e8438faede7ac742776a622c265922e498898 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ie2febe4de57c00c269def15d57f2b5a6f0f378aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Fix Touchscreen InterruptJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1138727. Elan touchscreen driver expects the first gpio resource in asl to be the reset line. The driver considers the gpio based irq line as reset gpio resource and changes the direction to output. This will cause irq registration to fail. Solution is to pass Interrupt resource for touchscreen irq instead of GpioInt. Original-Change-Id: Ia72d4ad80117f3c0014098113c9027416026e65e Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1c4b029851e321feeedf713186976fbec42dd82e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Enable CA MirrorShobhit Srivastava
Cherry-pick from Chromium commit e49deb1. Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is board specific. Original-Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Original-Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Ibd0c811d41cb592634f7785edb83ad2f423546c5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1940eb6. The unused lines leads to spurious interrupts on few of the systems. Original-Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Tested-by: Bernie Thompson <bhthompson@chromium.org> Change-Id: I6f4f7cec8ef11e781c66b6efff4188259469e41c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Clean-up the devicetreeRavi Sarawadi
Cherry-pick from Chromium 2b51633. Disable unused PCI devices. Update PCI DeviceID. Original-Change-Id: I34fa6e25f9178de959aad30cc979d787cf76b8ad Original-Signed-off-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7a06a1d44ce933000cbfe2eb71823ee66cb46a34 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Support reading Memory strap GPIOs to select SPDSubrata Banik
Cherry-pick from Chromium commit 8f63720. SoC GPIO to read Memory strap not getting configured correctly causing incorrect RAMID read during ROMSTAGE TEST=Build and boot the platform with differnt Memory type and read RAMID correctly inside spd.c RAMID = 0 => 4GB Samsung Memory RAMID = 1 => 4GB Hynix Memory RAMID = 2 => 2GB Samsung Memory RAMID = 3 => 2GB Hynix Memory Original-Change-Id: Ide9d4b5f73565cddd74cedf7afe4b7d168dde74c Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: If2ba9ec5be111b9c30360ffde41a2c644a69ecae Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-25soc/intel/braswell: select GENERIC_GPIO_LIBMatt DeVillier
Needed for to-be-added Google Braswell boards which make use of common GPIO library function to determine installed RAM type. Change-Id: Ie9b0c6513f10b252bf0a5014bd038d24879421be Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25mainboard/intel/cannonlake_rvp: SMBus, SAGV and Skip FSP MPInit in devicetreePratik Prajapati
Set SMBus, SAGV and Skip FSP MPInit configuration from devicetree.cb Change-Id: Ic810b003bf7fb13447d5d5dcd49cfcc31785b440 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/cannonlake: Init UPD params based on configPratik Prajapati
Initialize UPD params based upon config Change-Id: Ib2ee58f8432a957ef389b40f717533e4cfe774b9 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21175 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25soc/intel/skylake: Remove TCO lock down programmingSubrata Banik
FSP is doing TCO lock inside Post PCI bus enumeration NotifyPhase(). Hence remove TCO Lock down programming from coreboot. TEST= Ensure TCO_LOCK offset 8 bit 12 is set. Change-Id: Iec9e3075df01862f8558b303a458126c68202bff Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/common: Add function to DLOCK PR registersBarnali Sarkar
Add a function in FAST_SPI library to discrete lock the PR registers 0 to 4. BUG=none BRANCH=none TEST=Build and boot poppy Change-Id: I46e1948315ea9489932efdf7d60d6d78ab3948a6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/21063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Move PMC lock down config after resource allocationSubrata Banik
This patch to ensures that coreboot is performing PMC registers lockdown after PCI enumeration is done. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence PMC register lock down has been moved right after pci resource allocation is done, so that PMC registers can be lock down before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure PMC MMIO register 0xC4 bit 31 is set. Change-Id: Ibd86a38fa78752ce007da63a9ccdd991ca21ab92 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Remove ABASE lock down programmingSubrata Banik
FSP is doing PMC ABASE lock inside Post PCI bus enumeration NotifyPhase(). Hence remove ABASE Lock down programming from coreboot. TEST= Ensure GEN_PMCON_B offset 0xA4 bit 17, 18 is set. Change-Id: I800e654c7d8dc55cc0e8299501c1f85c57882e9d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Move LPC lock down config after resource allocationSubrata Banik
This patch to ensures that coreboot is performing LPC registers lockdown after PCI enumeration is done. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence lpc register lock down has been moved right after pci resource allocation is done, so that lpc registers can be lock down before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure LPC register 0xDC bit 1 and 7 is set. Change-Id: I705a3a3c6ddc72ae7895419442d67b82f541edee Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/common: Move update_mrc_cache after BS_DEV_ENUMERATESubrata Banik
This patch ensures that MRC cache data is already written into SPI chip before SPI protected regions are getting locked during BS_DEV_RESOURCES-BS_ON_EXIT. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence storing mrc cache data into SPI has been moved right after pci enumeration is done, so that SPI registers can be lock down before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure MRC training data is stored into SPI chip and power_ Resume autotest is passing. Change-Id: I8ee26b5cc70433438cf4e45e707b8a54f89cf9b0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25mainboard/google/coral: Add USB2 phy setting override for SantaTim Chen
In order to pass type C USB2 eye diagram for sku Santa, USB2 port#1 PHY register needs to be overridden. port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I07c0b7b0f08263a348befb7d6fd8d01028314470 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25amd/XX/hudson: Remove #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)Kyösti Mälkki
Remove the unnecessary #if from around the #include "fchec.h". Turn #if statements into if(). Change-Id: Ia0582b3ce24c55dd439dfadb727507240accd9d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25amd/pi/hudson: Fix FCH ECMartin Roth
Move the fchec.h files, which do not seem mainboard specific, out of the mainboard directories into the southbridge/soc directories. Change-Id: Idd271c6ab618aa4badf81c702212e7de35317021 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25soc/amd/stoneyridge: Move IMC ASL sourceKyösti Mälkki
This is not specific to a board but the binary IMC firmware used on the platform. Also remove unused IMSP and IMWK methods. Change-Id: I80026bca55f5ba236c080bcd882fc374559942e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-25soc/amd/stoneyridge: Move oem_fan_control()Kyösti Mälkki
While at it, replace LibAmdMemFill() with memset(). Change-Id: I770cab446add8f305f02e365e7c9763df88cd958 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21192 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25amd/pi/hudson: Move oem_fan_control()Martin Roth
It was not intentional to change oem_fan_control() to non-static with commit 23e5ba9 binarypi mainboards: Clean up IS_ENABLED fan control Every platform except bettong had its own static version of oem_fan_control, so remove the definition of oem_fan_control from imc.h, and move it out of imc.c into bettong's BiosCallOuts.c. Change-Id: Ie95ac1fd3a57259bb35796903aa8753ef0e70d70 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21189 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25asrock/imb-a180: Remove commented oem_fan_control()Kyösti Mälkki
Change-Id: Ibfbb2ff2d9776fe91a8a09561d9c32eb49a56db6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-24amd/pi/hudson: Clean up makefile.incMarc Jones
Sort makefile.inc into rom, ram, ver, smm stages and alphabetize. Change-Id: Ic8c6ca2b57527fcc96c135cc801a098201bf0465 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24mainboard/intel/cannonlake_rvp: set Max CPUs and Mainboard FamilyPratik Prajapati
Set MAX_CPUS and MAINBOARD_FAMILY for cannonlake RVP. Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ic6ef7e4f247ac2d227bab3b53512c659c5e72da7 Reviewed-on: https://review.coreboot.org/21152 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-24soc/intel/cannonlake: Add cpu.c and MP init supportPratik Prajapati
Add initial MP init support. This boots up all CPUs. Change-Id: Ia33691c17c663d704abf65320d4bf1262239524d Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21081 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-24binarypi mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert from #if to if() for all fan control setup code. Where necessary, make functions non-static to match the prototypes in imc.h. Change-Id: If88af42d00227285931829441909a982fc292b2b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24AGESA mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert all #if to if() for fan control setup. Change-Id: I04a9fbbf6f64f45e1a0b544267bfe840ce7fa1d9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24amd/pi/hudson: Convert 48Mhz en to read/write32Marshall Dawson
Change-Id: I91e09757e5eea1eaf9b76921ad032ad2b79c14c5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24amd/bettong: Fix IS_ENABLED for xHCIMarshall Dawson
Convert from #if to if(). Change-Id: Icf6db485735cb8bbadb3e742a079d0bafaacd79c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24mainboard/via*: Drop AMD car.h fileMarc Jones
Don't include src/include/cpu/amd/car.h in Via motherboards. Change-Id: I9d2b3cfb619cf831c7a677992ca03d5f42e5ffd1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24AGESA: Sync f15tn and f15rl northbridge codeKyösti Mälkki
Change-Id: Ia55c82f2245335a5d02e4d6567f606596c8439c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-08-24gizmosphere/gizmo2: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ief40319f5ff83c408e5a2b7f13572feabfab03a4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24biostar/am1ml: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I11ce2a558fe12f8f163dbe3dc52952a273b813ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/abm: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ie2f1eb5a101b9c392a7bd5cb2338dd6a6fdcfe52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/pavilion_m6_1035dx: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Iffc176522e943c003e2625d8e15341b281a261eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/thatcher: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I7194eb910cccc454c5f20c23629ff2a45b1a9079 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/parmer: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I3730bf87030b7e20991e1de00d2024e4b02f4c19 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24bap/ode_e20XX: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia747b3bc149a672a6de2ecf0308141172321a493 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/olivehill: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I646a8f4cfc1df8648a72e58814c36ea66b48e9d7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24asrock/imb-a180: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I5e6e4cabe2b93c41da19412ec3ae2dfaa114bcc0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24msi/ms7721: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I39a0b4acbe44dca8be63201502be739d954c8a33 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24asus/f2a85-m: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I5a6373ac03d942cd16905c9e8360f7179b8eea61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/torpedo: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Iac0998a56b4e297c512fcba98d3dbb4253c9b526 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24mb/google/coral: Copy devicetree.cb from baseboardTim Chen
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I5db730c1974a96547fe7fda63689b7c5bfaefc66 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/intel/skylake: Usable dram top calculation based on HW registersSubrata Banik
This patch ensures that entire system memory calculation is done based on host bridge registers. BRANCH=none BUG=b:63974384 TEST=Build and boot eve and poppy successfully with below configurations 1. Booting to OS with no UPD change 2. Enable ProbelessTrace UPD and boot to OS. 3. Enable PRMRR with size 1MB and boot to OS. 4. Enable PRMRR with size 32MB and boot to OS. 5. Enable PRMRR with size 2MB and unable to boot to OS due to unsupported PRMRR size. Change-Id: I9966cc4f2caa70b9880056193d5a5631493c3f3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23Update depthcharge stable to upstream masterMartin Roth
Updating from commit id 5a086f5c - Tue Jul 11 23:57:30 2017: (ps8751: enable software sync.) to commit id a843f262 - Wed Aug 16 23:37:52 2017: (kahlee: select emmc boot first if available) This brings in 20 new commits. This matches with the updated vboot submodule. Change-Id: If030bc3e75dd470838590540880213bd841154b8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23Update vboot submodule to upstream masterMartin Roth
Updating from commit id 8b714252 - 2017-07-18 02:36:16 (crossystem: Remove defunct sw_wpsw_bootfield) to commit id 8c4b8285 - 2017-08-14 20:37:45 -0700 (detachables: Skip "Enable Developer Mode" in DEV mode) This brings in 6 new commits. Change-Id: I7769035453796a162c6313cd0c87661ef1e64f89 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-23soc/intel/common: Early system agent library access in postcar stageSubrata Banik
BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: Ie5558cdb7acacc34451e1cf63a3e4239e7901c67 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/intel/common: Add functions into common system agent librarySubrata Banik
This patch to add helper functions for memory layout design based on PCI Host Bridge/DRAM registers. BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: I95250ef493c9844b8c46528f1f7de8a42cba88a2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23src/mainboard/intel/cannonlake: Add gpio support for cannonlakezhaojohn
Add gpio pins configuration for cannonlake rvp u/y boards. Change-Id: Ia077a070979401fe7bd23bda110d2b66a038d9fc Signed-off-by: john zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/intel/apollolake: Allow overriding dev tree settings by boardKane Chen
This change provides interface to override dev tree settings per board due to many projects share same devicetree.cb. BUG=b:64880573 TEST=Verify that dev tree settings can be overridden in mainboard on coral Change-Id: I349b1678d9e66022b586b6c7f344b831ed631c74 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/21142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23mb/lenovo/t430s: Enable libgfxinitBill XIE
Tested on T430s with an external screen connected to every one of the DP ports (miniDP on mainboard, two DP ports on dock), the GRUB payload can display on both the external screen and the internal LVDS screen. This is a copy-paste of I8f270d55 "mb/lenovo/x230: Enable libgfxinit". Change-Id: Ifb1471ecb18927c30c61c64011cbb0e20a465558 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-23sb/via/k8t890: Define ACPI sleep statesKyösti Mälkki
Change-Id: I9afd5eaab5f8e897dea037f32e1666ad31b0f8df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23soc/amd/stoneyridge ACPI: Sync sleepstates.asl definitionsKyösti Mälkki
Sync file with southbridge/amd/common/sleepstates.asl. SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Change-Id: I674953f1a5add74e16ddd84c252e8d21501ffefd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23sb/amd/amd8111: Define ACPI sleep statesKyösti Mälkki
Note that against the specs, these definitions repeat the sleep type also in the reserved fields 3 and 4. For consistency, don't fix it here now. Entry for \_S3 is now masked off if HAVE_ACPI_RESUME=n. Change-Id: Icdc4c81d07fe7a99d5b0f8fa23e9443f58a40ab9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Note that all boards incorrectly had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. Change-Id: Ia948becff079383cbf861468da9e8a3ebbf213cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AGESA binaryPI: Consolidate and fix sleep statesKyösti Mälkki
SSFG was meant to be used as a mask to enable sleep states _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. State _S3 is now set conditionally if HAVE_ACPI_RESUME=y. For pi/hudson this had been fixed already preprocessor. Note that all boards had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. States _S1 and _S2 still appear enabled in ASL/AML but may not actually work. TEST: 'cat /sys/power/state' and notice choice 'mem' was removed from the list of available sleep states. Change-Id: I27d616871c1771f0c87d8fba23d4ce1569607765 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22AMD K8 fam10-15: Tidy up CAR stack switchKyösti Mälkki
Return to empty stack before making the switch. Change-Id: I6d6f633933fac5bc08d9542c371715f737fb42cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
Change-Id: I5e7890aafbc8c80716ee49690e306482a482a863 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20573 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-22AMD K8 fam10-15: Tidy up CAR disableKyösti Mälkki
Avoid conflicting disable_cache_as_ram() declaration and tidy up include for inlined function. Change-Id: Iba77c711f5eb023566b7d8ba148583948661bc99 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-22vendorcode/intel/fsp/fsp2_0/denverton_ns: Add FSP header files for ↵Mariusz Szafranski
Denverton_NS SoC This change adds the FSP header files for FSP version 2.0 (15D50) for the Intel Denverton_NS SoC. Change-Id: I9672610df09089c549e74072345781bea0b4d06f Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/20805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Brenton Dong <brenton.m.dong@intel.com>
2017-08-22soc/intel/cannonlake: Define soc_intel_cannonlake_configPratik Prajapati
- Populate soc_intel_cannonlake_config - Add usb.h and vr_config.h for CannonLake Change-Id: I2a6e737594da1e766b157a38942e19a4f7fb9dfa Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22ec/google: Detect keyboard backlight at runtimePatrick Georgi
This enables adding the backlight driver to boards that may or may not come with a keyboard backlight function. It's the responsibility of the EC to report if that feature exists, but that's not a big extra burden given that it already keeps track of everything else related to the backlight. BUG=b:64705535 BRANCH=none CQ-DEPEND=CL:620595 TEST=configured KBLE manually and noticed the presence/absence of /sys/devices/platform/GOOG0002:00/ on a Chrome OS Linux kernel, corresponding to the value reported by the EC. Change-Id: Idc36bfaa6e69581ba19b52d37af6956f63cfdb8f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22soc/intel/skylake: Lock sideband access in coreboot and not in FSPBarnali Sarkar
The Sideband Acces locking code is skipped from FSP by setting an FSP-S UPD called PchSbAccessUnlock. This locking is being done in coreboot during finalize.c. This is done because coreboot was failing to disable HECI1 device using Sideband interface during finalize.c if FSP already locks the Sideband access mechanism before that. So, as a solution, coreboot passes an UPD to skip the locking in FSP, and in finalize.c, after disabling HECI, it removes the Sideband access. BUG=b:63877089 BRANCH=none TEST=Build and boot poppy to check lspci not showing Intel ME controller in the PCI device list. Change-Id: I8dba4c97480200507969b0f2873337f97bd2ff6a Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-22google/kahlee: Enable ALS connected to ECAkshu Agrawal
Kahlee has an ambient light sensor connected to the EC. TEST=Can see the device in /sys/bus/iio BUG=b:62030268 Change-Id: Id1138a0fc5270489a734bdf8b1f4ac02d358c0df Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/21146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22mainboard/intel/cannonlake_rvp: remove redundant devicetree.cbPratik Prajapati
devicetree.cb of cannonlake-u and y variant gets picked up from src/mainboard/intel/cannonlake_rvp/variants/cnl_[u/y] Change-Id: I83f636c93407a6fe17114582506397c46d1b4e20 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-22mainboard/intel/cannonlake-y: populate PCI devicesPratik Prajapati
Define and populate PCI devices in devicetree for CNL-Y RVP Change-Id: I311437798274dd48b0898f0832bf03d86fd9d3a6 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-08-22mainboard/intel/cannonlake-u: populate PCI devicesPratik Prajapati
Define and populate PCI devices in devicetree for CNL-U RVP Change-Id: Id04f5efe77a04c180b5dd392da777195bd9fb7a3 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-08-22mainboard/google/coral: Overwrite family code for coral models.Harry Pan
This patch assigns the code of coral family, such that, the 'mosys platform family' returns 'Google_Coral'. BUG=b:64467244, b:64501879 BRANCH=none TEST=Examine 'mosys platform family' w/ new firmware. Change-Id: I1d8f8ca2166a1d80855608cf5b64b0cc7bf3dc93 Signed-off-by: Harry Pan <harry.pan@intel.com> Reviewed-on: https://review.coreboot.org/21136 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-22util/msrtool: Exit program after displaying the help messageMaciej Suminski
In case there is no mode selected, sys and cpu variables are not initialized, causing a segfault on exit (goto done). Change-Id: I4a183c267e306598627c1612f4633f1e19019f3c Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21026 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-08-22util/inteltool: Remove duplicated error message, switch to snprintfMaciej Suminski
Passing a string containing output from strerror() to perror() causes double error message display. It is also causing segfaults when the error message is longer than temp_string capacity. To fix the problems, sterror() call has been removed so the error message is printed only once. This could be enough to avoid segfaults, but it is a good practice to limit output size with snprintf(). Change-Id: I5ccc37e404f278cafae0a451c5acaa27d7907cce Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-21soc/intel/cannonlake: Enable common PMC code for CNLLijian Zhao
This update changes Cannonlake to use the new common PMC code. This will help to reduce code duplication and streamline code bring up. Change-Id: Ia69fee8985e1c39b0e4b104c51439bca1a5493ac Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Fix SGX init sequencePratik Prajapati
Configure core PRMRR first on all the cores and then follow the SGX init sequence. Second microcode load would run the MCHECK. To pass MCHECK, PRMRR on all cores needs to be configured first. Hence, PRMRR configuration would be called from soc_core_init while MP init for each core and then from soc_init_cpus, BSP would call sgx_configure for each core (including for itself). This code flow satisfies the MCHECK passing pre-conditions; and apparently this patch fixes the behavior of calling configure_sgx() “again” for BSP. (So removed the TODO comment also). Change-Id: I88f330eb9757cdc3dbfc7609729c6ceb7d58a0e1 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21007 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21intel/common/block/sgx: Refactor SGX common codePratik Prajapati
To correct the SGX init sequence; PRMRR on all cores first needs to be set, then follow the SGX init sequence. This patch would refactor the common SGX code (and add needed checks in the init sequence) so that SOC specific code can call SGX init in correct order. Change-Id: Ic2fb00edbf6e98de17c12145c6f38eacd99399ad Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21intel/common/mp_init: Refactor MP Init code to get rid of microcode paramPratik Prajapati
Remove passing microcode patch pointer as param while calling - soc_core_init() - soc_init_cpus() Also change callbacks in apollolake/geminilake and skylake/kabylake common code to reflect the same function signature. Change-Id: Ib03bb4a3063d243d97b132e0dc288ef3868a5a7b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21010 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21superio/winbond/w83627*: Remove deprecated codeKeith Hui
Early serial for W83627[HF|EHG] superios are handled by superio/winbond/common/early_serial.c. Remove code thus deprecated. Build tested on select affected mainboards. Change-Id: Idad6e0281f7a272e184feff686ce1407825429c7 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21Boards w/ Winbond superios: Use common config entry codeKeith Hui
Six mainboards with Winbond superios directly configure them in romstage.c. All use the common Winbond romstage code. Change them to use the common config entry code to allow for code refactoring such as [1]. Build tested. [1] https://review.coreboot.org/20988 Change-Id: Icecd52ec622b9da86edb07c52893f4db001e5562 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21mainboard/asrock: add ASRock B75 Pro3-MIru Cai
Tested: - i5-3550 and DIMM configurations: 2+0+2+2, 0+2+2+2, 2+2+2+2, 4+2+4+2 - debug output from serial port, EHCI debug port not found - Arch Linux (Linux 4.11.5) loaded from SeaBIOS, GRUB2, and Linux payload - all PCI and PCI Express slots Issues: - sometimes the machine fails to boot, with serial debug output it can be seen it stucks after SMM initialization, and more likely to fail to boot when serial cable is attached - no S3 resume (not tested in vendor firmware) Change-Id: I94fbfcee06921538b32aa3c23efa642e7e405ef6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21libpayload: add time()Nicola Corna
Change-Id: I97e393537ccc71ea454bb0d6cdbbb7ed32485f1e Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21ec/lenovo/h8: Add panic methodPatrick Rudolph
Add two additional LED IDs. Add Kconfig menu entries to allow selecting the action to execute on death. Overwrite weak die_notify method to notify user on death. Flash all LEDs and play beep code 10 depending on Kconfig options. Successfully tested on: Tested on Lenovo T500. Tested on Lenovo X200. Tested on Lenovo T430, but only LEDs are flashing. Change-Id: Id34d399f154952a48c1f4ccb0c41a238b2d7ccb8 Signed-off-by: Patrick Rudolph <siro@das-labor.org Reviewed-on: https://review.coreboot.org/19695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-21google/snappy: Add Raydium touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64821783 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8852e38f01f82b80c2c9718b93baf5894dbd745b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-21google/snappy: Add MELFAS touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize MELFAS touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64779224 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: If2bc910d641e0cf2b120ed883c5788542959f568 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21intel/common/sgx: Use intel_mp_current_microcode() to get microcode pointerPratik Prajapati
Get microcode patch pointer from intel_mp_current_microcode() api of mp_init and change sgx_configure function signature to drop microcode_patch param. Change-Id: I9196c30ec7ea52d7184a96b33835def197e2c799 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21009 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21soc/intel/cannonlake: Add support for all UART port indexSubrata Banik
Select LPSS UART Base address based on LPSS UART port index. Change-Id: I31b239e7e6b7e9ac8ea2fcfbcbd8cb148ef9e586 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Add support for all UART port indexSubrata Banik
Select LPSS UART Base address based on LPSS UART port index. Change-Id: I306d3d299f8d6a890ae519c74008f9d0d9dd1a76 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/cannonlake: Add Kconfig option to select UART indexSubrata Banik
Cannonlake SOC has two possible ways to make serial console functional. 1. Legacy IO based access using Port 0x3F8. 2. LPSS UART PCI based access. This patch to provide option to select index for LPSS UART port: 0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2 PCI based LPSS UART2 is by default enabled for Chrome Design. Change-Id: I7afa5ab2c5eb06e6df8eeb1cb1cd0de00d2b2a28 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Add Kconfig option to select UART indexSubrata Banik
Skylake/Kabylake SOC has two possible ways to make serial console functional. 1. Legacy IO based access using Port 0x3F8. 2. LPSS UART PCI based access. This patch to provide option to select index for LPSS UART port: 0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2 PCI based LPSS UART2 is by default enabled for Chrome Design. Change-Id: I9647820fe59b5d1a1001a611b9ae3580946da0ae Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/apollolake: remove duplicate gpio GPE definesAaron Durbin
Remove the duplicate MISCCFG_GPE0_DW* macros that are already present in the common gpio code. Change-Id: Iad75e5f7e276b37b5861f0c9a3bb0bb2824a638c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21intel/common/cpu: Add function to get microcode patch pointerPratik Prajapati
Add mp_current_microcode() function to get the microcode patch pointer. Use this function to avoid reading the microcode patch from the boot media. init_cpus() would initialize microcode_patch global variable to point to microcode patch in boot media and this function can be used to access the pointer. Change-Id: Ia71395f4e5b2b4fcd4e4660b66e8beb99eda65b8 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 20:19:40 +0000