| Age | Commit message (Collapse) | Author |
|---|
|
Types from stdint.h are used in that header file without stdint.h being
included.
Change-Id: I71449dd26162dc8420c206285896ac9a8e4e04d4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The two defines are identical, so deduplicate this.
Timeless build for lenovo/x230 results in identical binary.
Change-Id: I32e0eee88d72eb6f8dc71b0324d62f46079120a9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus
variants are so close to that that they only have 0.5KB left. This is
blocking development of new core features, so let's disable the
bootblock console to gain a couple of KB back (like we already did on
RK3288).
There are probably other opporunities for code size reduction here (e.g.
it seems that almost half(!) of that whole bootblock size is taken up by
devicetree.cb structures), but I'm not familiar enough with the platform
to dig into them.
Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie1d0a2ed9aa5c0645fa8400ec9af17be592d3dea
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
All variants of ga-b75m-d3h lack ACPI definitions for legacy PCI
slots, which causes IRQ issue if it gets legacy PCI card installed.
The missing definitions (mainly Interrupt Routing Table) are added to
fix that.
NOTE: The added definitions are actually for ga-b75-d3v, but since
they form superset of definitions needed by ga-b75m-d3{h,v}, they can
be applied to all three existing variants with suitable preprocessor
instructions.
Change-Id: Id79c759a5fadb38c2873edc07293cbb14401ac9a
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:148252157
BRANCH=none
TEST=Put a puff in s0ix, send a WoL magic packet.
Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add new mailbox command support. Set CPU ID and cores to EC.
EC will according to different CPU to set different power table.
BUG=b:148126144
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I135d2421d2106934be996a1780786f6bb0bf6b34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support
in coreboot is developed by System76 and provided as the default
firmware option. Testing is done on a pre-production model expected to
be identical from a firmware perspective to the production model.
Working:
- Payload
- Tianocore
- CPU
- Intel i7-10510U
- Intel i5-10210U
- EC
- ITE IT5570E running https://github.com/system76/ec
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend/resume
- Touchpad
- GPU
- Intel UHD Graphics 620
- GOP driver is recommended, VBT is provided
- eDP 14-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD
- Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM
- Networking
- M.2 PCIe/CNVi WiFi/Bluetooth
- Sound
- Realtek ALC293D
- Internal speaker
- Internal microphone
- Combined headphone/microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe/SATA SSD-1
- M.2 PCIe/SATA SSD-2
- RTS5227S MicroSD card reader
- USB
- 1280x720 CCD camera
- USB 3.1 Gen 2 Type-C (left)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
Not working:
- TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0
are not currently supported by the intel fast_spi driver.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add MIPI camera ACPI
Update GPIO pin mux for camera
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board and check camera
Simple test method to check camera: capture image by below commands from
OS console
>media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]"
>media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]"
>media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]"
>media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]"
>media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]"
>media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]"
>media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]"
>media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]"
>yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10
$(media-ctl -e "Intel IPU6 CSI2 BE capture")
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4189e96f68f0e64e0860405e00eeab84564b86be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37863
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The use of ENABLE_APIC_EXT_ID removed with commit: de56a66e
Change-Id: I24c07c9a4813ceba48082ca2c564266435e58a18
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38575
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Under some circumstances grep detects the input of a spd hex file
as binary resulting in an spd source not beeing added to the
resulting spd.bin. This appears to be especially the case with
heavily commented files.
This commit forces grep to read the input as text file.
Example SPD that would else be detected as binary (regardless
of stripped zero blocks).
```hex
\# TotalBytes: 512 ; BytesUsed: 384
23
\# SPD Revision 1.1
11
\# DDR Ramtype: LPDDR4X
11
\# Config Rest
0E 16 21 95 08 00 00 00 00 0A 22 00 00 49 00 04
0F 92 54 05 00 84 00 90 A8 90 C0 08 60 04 00 00
[...]
\# CRC Is: 0x1EB4 Calculated: 0x1EB4 Match!
1E B4
\# ModuleSpecificParameter
[...]
\# HybridMemoryParameter
[...]
\# ExtendedFunctionParameter
[...]
\# ManufactoringInformation
\## Module Manufactoring ID
00 00
\## Module Manufactoring Location and Date
00 00 00
\## Module Manufactoring Serial
00 00 00 00
\## Module Manufactoring Part Number: "K4UBE3D4AA-MGCL"
4B 34 55 42 45 33 44 34 41 41 2D 4D 47 43 4C 00
00 00 00 00
\## Module Manufactoring Revision Code
00
\## Module Manufactor: "Samsung" (0xCE80)
CE 80
\## Module Stepping
00
\## Module Manufactoring Data
[..]
\## Module Reserved
00 00
\# EndUserProgrammable
[...]
```
Thanks to Patrick Georgi for checking that this grep option
is widely available.
Change-Id: I7e5bad069531630b36dc3702c8c4bd94ba0946c1
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38426
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Perform EC initialization in bootblock and ramstages. Add associated ACPI
configuration.
BUG=b:144768001
TEST=Build Test.
Change-Id: Ib31ae190818c8870bdd46ea6c3d9ca70dc0485cc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable building for Chrome OS and add associated ACPI configuration.
BUG=b:144768001
TEST=Build Test
Change-Id: Ibb94849a903e4d4364d817de8988a430cd717e4c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add stub implementation of smihandler.
BUG=b:144768001
TEST=Build test.
Change-Id: I7ab25888812bfb4578915e342b14355ccd15f5cc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable ACPI configuration and add DSDT ACPI table.
BUG=b:144768001
TEST=Build Test
Change-Id: I0aa889cd52bff3e1e9ff7b7b93ec1000045bcfd2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add stubbed out GPIO configuration and perform GPIO initialization
during bootblock and ramstage.
BUG=b:144768001
TEST=Build Test
Change-Id: I1397b6a433e5046650f64f7eb9a84c51eb0c7441
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38278
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the specification the register offset must be 0x71 instead
of 0x70.
Change-Id: Icf69ffc701a42a31a4545ce53c13e2c2554863e1
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Drop DRAMT write as it's only rewriting the power on default.
PMCR write is required. Update comment on its purpose and move to
end of sdram_enable().
Change-Id: I62e8b2531f0f297ffb7db440db89ffa65771b7d5
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I27b2fcf6fea18e03dddb015eb017acc5db1db540
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Build broke with CONFIG_DEBUG_RAM_SETUP enabled after commit 3f882faf
(intel/i440bx,i82371: Remove wrapper spd_read_byte()).
This is the fix.
Change-Id: Ib83885fc50c8fab61ced5ff18f22aa4655c5aaab
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The bits cleared by this have to do with dGPU power, which this
board lacks.
TESTED: x201 still boots.
Change-Id: I441743f76afc7bbbee930a1c8116035e85d94e52
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36911
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates SA DRAM registers bit definitions as per
SKL datasheet vol 2, doc 332688.
TEST=Build and boot EVE and Soraka to OS.
Change-Id: Ia32723444c044572fbcecce151d89e739e570b3b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=Build and boot EVE and Soraka to OS.
Change-Id: Ic765dc2a7a522872ee991e47e3608f60a0e6411a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38513
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per PC client TPM specification, the TPM description contains the
base address of the TIS interface 0xfed40000 and the size of
the MMIO area is 20KB (0x5000). Hence ACPI used to reserve those fixed
system memory from getting used by OS.
Platform with TPM_CR50 doesn't require fixed SoC mapped memory hence
additional reservation might not required.
TEST=Build and boot EVE and Soraka to OS.
Change-Id: Id02a2659ce42f705180370000df89d4f6b64afce
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38512
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add IPU ACPI object for Camera ACPI.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8c1ca9c053f0c8ef8d7c027c317c7af74d5f0f8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage
device and NVMe Optane memory. Storage device uses rp9 and optane memory
uses rp11. This patch enables rp11. Please note that these two share clk pins.
This is also dependent on pciecontroller3 config to be set as 2x2 instead of
1x4 in fit configuration in IFWI.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board from Optane and check 2 NVMe devices
from lspci
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ic81244bebac78102af7ba6308ab64b18c886f839
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board from NVMe
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I14997e0a7d03bf1a97d115cbf0a7ad2603ef9953
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38285
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP header files for Tiger Lake platform version 2457.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I47574844a8b5fd888e8e75ed2f60f6df465b33ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This patch adds ASL methods like GRXS, GTXS, STXS and CTXS
which are used to get, set and clear gpio values. We use
ASL 2.0 syntax here for gpio.asl.
BUG=b:144680462
BRANCH=none
TEST=Build and boot tigerlake rvp board
Change-Id: I17e75ff2a7cb67e94669059a1ed9d73a720ebcb1
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38442
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIOs are divided into different communities. Each community
consists of one or more GPIO groups. We need to configure the
groups in coreboot so that they are mapped properly.
GPIO comuinities in coreboot should match with the kernel gpio
communities also. Kernel reads the ASL file from coreboot. This
patch adds the proper community mapping in ASL code to match with
kernel code. In gpio_soc_defs.c file we are indexing the groups
correctly. In gpio.h file we define all the gpio devices as kernel
populates sysfs with separate gpio device for each community. This
patch is created based on Intel Tiger Lake Processor PCH Datasheet
with Document number:575857 and Chapter number:27.
BUG=b:144680462
BRANCH=none
TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl
verify INTC34C5:0<1-3> listing all the pins for each community.
e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list
all the community 0 pins.
Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Having a working board reset is certainly better when you're running
vboot (because otherwise you'll hang when transitioning into recovery
mode), but I don't think it should be strictly required, since it's
still somewhat usable without. This is particularly important for
certain test platforms that don't have a good way to reset but might
still be useful for vboot testing/prototyping.
Change-Id: Ia765f54b6e2e176e2d54478fb1e0839d8cab9849
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38417
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build and boot EVE and Soraka to OS.
Change-Id: Ic7840ce264393b4a955f17b16f5e0f556e34a776
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38511
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SoC handles PCI IRQs programming inside PCH related ASL.
TEST=Build and boot EVE and Soraka to OS.
Change-Id: If95101193fa1b528dc64f57c0fc12f13f16d82b4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove fixed IccMax values for U22 CPU.
IccMax will be selected by CPU SKU.
BUG=b:148110226
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to device and checked IccMax[1].
Change-Id: Ifcd31ad5b608ce599d4294a6522fdda022f8a177
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
BUG=N/A
TEST=build
Change-Id: Ifb45bc1f7f4d3744124d6797fb4c791fd5f227ca
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Add Provides ACPI_GPIO_IRQ_LEVEL_[LOW|HIGH]_WAKE versions to allow board to define a gpio irq as wake capable.
Change-Id: I42f5084c5f0f5da0a4b39df77707b2f158bcc03d
Signed-off-by: Alex Levin <levinale@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable both SATA ports for TGLRVP.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board with SATA memory
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I9f35682982a6c06522e58b0bbd7162ff02c37f32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38505
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure SATA FSP UPD according to mainboard design.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board with SATA memory
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I9350d71d76cd3d449fd959b5398d5ac653bc459e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38504
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3f58cc15897bff87dd699ab1fb1c42545119f0b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch updates system agent related registers bit definitions
as per EDS.
For example:
As per CNL/ICL EDS MCHBAR register base is between bit 16-38
but coreboot programming was not aligned with EDS previously.
CNL EDS doc number: 566216
Also provide provision to program 64bit values as per SA EDS definitions
TEST=Dump MCHBAR in coreboot and ASL shows same 32 bit value.
Change-Id: I37340408fe89c94ce81953c751c8d7e22bc81a42
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
1. Add a TEMP_SENSOR3
2. Update DFPS (fan performance state) table with values received
from thermal team
3. Update PL1 override to 15W
4. Update PL2 override to 51W
BRANCH=hatch
BUG=b:147792204
TEST=build and verify by thermal team
Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 2843aa62:
2019-12-12 Julius Werner 2lib: Move firmware body size reporting to
separate function
to commit id f5367d59:
2020-01-20 Joel Kitching vboot: translate recovery reason info from
vboot 2->1
This brings in 27 new commits.
Change-Id: I7d33337881fa2d36d6e562b0a390b56227cfad55
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
Enable SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT for tigerlake.
BUG=b:142961277, b:145494156
BRANCH=none
TEST=none
Change-Id: I1f785f410982f7d7598942f9b12196851e77c240
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37629
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL allows MKBP events from the EC to wake the system from suspend
states.
BUG=b:144122000
BRANCH=firmware-hatch-12672.B
TEST=Verify that MKBP events generated from EC will wake the system
from S0ix.
Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Values as per "IT8772E Preliminary Specification V0.4 (For F Version)".
Some values are unclear on this document, but is the only one I have.
Change-Id: I6d74984f453c47d6ec71963a7dcab961a22a5964
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The firmware configuration (fw_config) field is store in the CBI EEPROM
and it should be used to make firmware customization instead of
sku/variant id.
BUG=b:145519081
TEST=builds
Change-Id: I790998a29e724ecdff8876cca072267537b7cea6
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Copy ec_commands.h directly from Chromium OS EC repo at sha e57217a250.
This is needed for the FW_CONFIG CBI field definition.
Change-Id: Id010721033ebe32ac9c9482d666cf790442a26ee
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add initial fsp upd settings for TGL, both romstage and ramstage upd's to
support basic build and boot of TGL RVP.
- Add Silicon upd settings which includes
* Serial IO/UART settings
* Graphics settings
* USB2/USB3 settings
- Add Romstage upd settings which includes
* Pcie Root port settings
* IGD initialization
* Hyper Threading settings
* SMBus controller settings
* Debug probe settings
BUG=none
BRANCH=none
TEST=Build and boot Tigerlake rvp board
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I16df66451fd3a681df1222d283d97dd6bdaff0e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37960
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIOs are divided into different communities. Each community
consists of one or more GPIO groups. We need to configure the
groups from coreboot so that they are mapped properly.
GPIO communities should be properly configured in GPIO_CFG and
MISCCFG registers. GPP_* defines in gpio_soc_defs.h are configured
in GPIO_CFG register while the PMC_GPP_* in pmc.h are used to
configure the MISCCFG registers.
BUG=b:144680462
BRANCH=none
TEST=Build and boot tigerlake rvp board. Verified that after
setting the gpe from devicetree the GPP_EN register for
that community gets updated setting that specific bit.
From the iotools i checked that GPE_EN register for that
community is updated with that specific bit set to 1.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I585100375feee39b5a9105bdf6d9f5ca3a5bb2fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Add Elkhartlake CPU, SA and PCH IDs.
EHL PCH is code named as MCC.
Also add a MCH ID (JSL_EHL) which is shared by both JSL and EHL SKUs.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I03f15832143bcc3095a3936c65fbc30a95e7f0f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38489
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update interrupt header and interrupt mapping per Intel Silcon reference code.
Need to match pci_irqs.asl with FSP setting which followed by PCH BIOS spec.
Reference
PCH BIOS spec#613495
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ClientOneSiliconPkg
/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/PeiItssPolicyLibVer2.c
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iffc4efad4d0aa55fc0de88d7fe32c0356dbc3c60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38258
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Align the fbg1701 sleepstates implementation with monolith.
BUG=N/A
TEST=build
Change-Id: I3a715781bf51da41d6954463ad38ed94b0dfd217
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The monolith board doesn't support the S3 and S4 states because of the
watchdog and failover mechanisms.
Remove S3 and S4 from the available sleepstates.
BUG=N/A
TEST=build
Change-Id: I01f67d8bb3f9e45caef748caca91eeb6859d7393
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Some boards don't support S3 or S4. The S4 state can't be removed from
the available sleep states.
Add a config item that allows removal of the S4 state from the list of
available sleep states. The S4 state can be removed by selecting the
item on board level.
For the AMD chipsets the SSFG mask is updated to remove the S4 state.
BUG=N/A
TEST=build
Change-Id: Id802c4cc40308ddf39e99e7f226d55e0e020f0c9
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38431
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to VRTT report, add ac/dc loadline configuations in puff device
tree.
BUG=b:147206535
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to puff and checked the log.
All ac/dc loadline configs were set correctly.
Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Jinlon will use EC to control fan, so remove DPTF fan control.
BUG=b:141259174
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ONBOARD_VGA_IS_PRIMARY is selected if board selects
DRIVERS_LENOVO_HYBRID_GRAPHICS.
See commit 35abe73e with Change-Id:
I6594fbb957c9a8135fe670d38b5755adf29d2dff ("mb/lenovo/t430: Fix Dual
Graphics").
Change-Id: I39687e5cd34979fd4318978f5aa46ac6cdf721e8
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6c7bbb89af88cce1a53c21a4b4d8bc1c284e1cb2
Signed-off-by: Ivan Vatlin <jenrus@tuta.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use information provided by AGESA to fill the SMBIOS memory tables.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I45bb2fc36cf0c01670e9fc8559d3a6183ea271f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Following the example of change CB:37737 (ee8f969).
Switching was done by moving a SIO configuration and
the clocks setup from 'romstage.c' to 'bootblock.c'.
Tested-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Change-Id: I2e710ac61843c09a055523c7971e4c05bae56a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fix devicetree to advertise the correct USB names and types
in the generated ASL.
BUG=b:146437991
BRANCH=none
TEST=booted and inspected the reported generated ASL.
Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add SMMSTORE support for saving EFI NVRAM variables in
conjuction with Tianocore payload.
Test: none, as this duplicates tested functionality in
amd/stoneyridge.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Id05b33edf949611c3f9eac94e7b63a4266c6c4d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ibb37c2d99c1a95b1d37bec784c98e636da4836d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38470
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Build tested on Ubuntu 18 LTS, FreeBSD.
Change-Id: Ida2c1f36aba7469d69dbb12ee6afce4a181bd6b7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3d0ab7dacb5facb7dd14dd471cd0fb9f06bf0e37
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing rule created a potential race condition between creating
the directory and putting files in there, so use our existing
infrastructure for directory creation instead.
Change-Id: If52a9f558c7d9ce85f71ba53232594699c9d357a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37798
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the ACPI code needs to be extended, as smihandler.c already
supported it. The _Q50 Method is just _Q18 with changed name.
On Linux, pressing the undock button does nothing, so the only safe
way to undock is to press Fn+F9. With this patch, when the undock
button is pressed, the green LED lights up, and undocking is safe.
Change-Id: Iaaecad031bb1f39dd1a778d0c8eaea6bce9e0f57
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38446
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Nuvoton NCT5104D GPIO IO VLDN and define an IO base address
unused by any peripheral for GPIO use.
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I034c5d0169b8d97eac97a20c92c22816fd674f79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Now, Super I/O GPIOs can also be controlled directly through
access to I/O registers. VLDN 108 and specific I/O port from a range
<100h; ff8h> may be enabled in mainboard devicetree.
Change-Id: I4ce99bb44e6f5db684170f4190bdc38a944849f6
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35849
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The mainboard ASL code contained a power button definition. This is not
required as the system uses the standard ACPI power button.
Remove the PWRB device from ASL.
BUG=N/A
TEST=tested using fwts on a facebook monolith.
Found-by: fwts 19.12.00
Change-Id: I25a842539ee2e8febc8a1ae88843a71ccb4ee68e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38133
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The mainboard ASL code contained a power button definition. This is not
required as the system uses the standard ACPI power button.
Remove the PWRB device from ASL.
BUG=N/A
TEST=build
Found-by: fwts 19.12.00
Change-Id: I4fac1411fd99475551bc970818759649f80b3f0e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38134
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iee75faaef713dd6ec6b6e2d536df09a41010eebf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add SMMSTORE support for saving EFI NVRAM variables in
conjunction with Tianocore payload.
Test: build/boot several google/kahlee variants, test
manipulation and persistence of Tianocore bootorder variables.
Change-Id: Ida604a44d1fa5288e96dbe05de1f847e597cc95d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When regions are resized they are always aligned to the top of the
region. For the BIOS region this is correct. The other regions however
should be aligned to the bottom of the region.
Update the region handling to only align BIOS region to top of region.
BUG=N/A
TEST=verified image resize
Change-Id: Ied0e763b5335f5f124fc00de38e5db1a4d0f6785
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
NOTE: The ME interface was disabled on folio_9470m and revolve_810_g1.
It is assumed that they were ported while the ME was in an abnormal
state (usually due to me_cleaner usage), and that it should be enabled.
In any case, the MEI device is hidden if the ME fails to boot already.
Change-Id: Ibf32a034653946f49f72a2c19c41a4033964ef83
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update Makefile.inc so as to add the SPD data when needed. Tested
building other variants, no spd.bin gets added because they don't select
GENERIC_SPD_BIN.
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I0cda3f839baa227ce6a4b8f0510934125e5afb59
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I65696c5739469b33253c22c1d5a65cc31ef3a421
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since this board does not have integrated graphics, do not install the
INT15 handler if it is not selected in Kconfig.
NOTE: Since cmos options are not very flexible, this board ends up with
a spurious gfx_uma_size option. Other than that, everything is the same.
Tested with BUILD_TIMELESS=1, binary does not change when ignoring the
cmos options.
Change-Id: I2ebcfd5160773bf98a3d23e797a89e290063d112
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I6dbecb0b4d38ed4af8966f5391fce1f2c9c5d182
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I17b6ac9ac2433b760e125a1ce708d3b422b632b5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: Idc4d0a3d7384ad4e5a3eb3d7ecefaa2f35093ac0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Get ready to squash all the HP Sandy Bridge and Ivy Bridge laptops
together, so as to factor out lots of repeated code.
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I0b68e524b57e3705e91e3cd98be5571b3554bd67
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change stapm percentage to 80 and time to 2000 seconds make
DUT meets Lenovo spec and pass CTS respectively.
BUG=b:147333429
TEST=build firmware and install it to DUT and run CTS relevant
test, check temperature whether meets spec.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6a2f059fbd5c89f897cfb46d1f7a82b0923edb17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38443
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These predate hyperthreading so they are not SMP capable unless installed
in a SMP board. Turning SMP off shaves 128 compressed bytes from
ramstage.
Change-Id: I114bdc83ed40ccd9d3996aabf77422236d9d12fa
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds CML-S 2 and 4-Core MCH IDs and fix wrong ID for
10-Core ID.
Change-Id: I30f6c8a5234b7754d984b598bf7bae103ec9712e
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
- Disable Windows driver DPST function
- Set POST resolution to 1800x1200
- Set POST brightness to 225 (0-255 scale)
Test: Boot Windows on EVE, verify display backlight control
functional and no lock ups from switching in/out of tablet mode.
Change-Id: Ida64a44df2449f1ff0dc5c8d0ec7b40a183566a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Base on SATA SI report to fine tune the strength for port 1.
BRANCH=none
BUG=b:147351936
TEST=build and test SATA port works fine.
Change-Id: Ib82b7e5df32b4ce794682781f33c44dfeb6e68bf
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add config to chip.h for tuning SATA gen3 strength.
BUG=b:147351936
BRANCH=none
TEST=build successful in puff
Change-Id: I4dcd23834fa3c01c1d88697a7bb8cf361709b62e
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38432
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IMD provides support for small and large allocations. Region IMD Small memory is 1 KB
with 32 Bytes alignment, this region holds smaller entries without having to reserve a
whole 4 KB page. Remaining space is assigned to IMD Large to hold various regions with
4 KB alignment.
The UCSI kernel (kernel version 4.19) driver maps the UCSI_ACPI memory as not cached.
Cache mapping is set on page boundaries and all IMD Small is within the same page.
If another driver maps the memory as write-back before the UCSI driver is loaded then
the UCSI driver will fail to map the memory as not cached.
Placing UCSI_ACPI in IMD Large region will prevent this mapping issue since it will
now be located within its own page. This patch will force UCSI_ACPI region to be
located in IMD Large region.
BUG=b:144826008
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Id00e76dca240279773a95c8054831e05df390664
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add and update ACPI files for Tiger Lake SoC
Use ASL2.0 code syntax for new acpi(camera_clock_ctl.asl)
Reference
PCH EDS#576591 vol1 rev1.2
PCH EDS#575857 vol2 rev1.0
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ib82156830273c2937f5f02713ed7dd27da41c857
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37781
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates pci dev definition according to TGL EDS.
Add GSPI3 case in chip.c according to updated pci dev definitions.
Reference
TGL Process EDS#575681 rev1.0
TGL PCH EDS#576591 rev1.2
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4717ac3cc877b13978b18ada504740512f10c709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38341
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the VBOOT_ALWAYS_ALLOW_UDC option to actually enable the xDCI
controller.
BUG=N/A
TEST=build
Change-Id: Ib51f2c82e69db83cebceb71ba5f1305764e0feca
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
When a VBOOT enabled system is used without ChromeOS it may be valid to
allow the UDC independent of the vboot state.
Provide the option to always allow UDC when CHROMEOS is not selected.
BUG=N/A
TEST=build
Change-Id: I6142c4a74ca6930457b16f62f32e1199b8baaff8
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update Tigerlake RVP UP3 devicetree to reflect devices used by
tglrvp_up3.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Idd0d9efe0ab4e050d2160f7662e4dc40a002672f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37929
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix typos and replace spaces with tab in macro definitions.
TEST=Build and Boot hatch board
Change-Id: I43b2df7defc97aaeb7c8c9dfbe08ce78ba81f39b
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38384
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Below changes are done in the patch:
1. Remove unnecessary lining, and replace spaces with tabs
2. Add description for macros
3. Correct comment mentioned for wrapper #ifndef
TEST=Build and Boot hatch board
Change-Id: I630446234321e7998ab42f8506a58b16e9ce4eb0
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update chip files to include :
- Update chip.c based on TGL FSP
- Update chip.h based on TGL FSP
- Update Kconfig : Define CONFIG_MAX_PCIE_CLOCKS for chip.h update
- Update pmc_utils.c and JSL devicetree for build failure
Reference
PCH EDS#576591 vol1 rev1.2
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ie1518a7ffa69079fe82232afe229d9e1ffe29067
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37783
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake SoC doesn't have GPIO defined for GPP_G. so compilation is
failing due to this.
We will update correct gpio for sd card detect once we have Jasper Lake
soc gpio patch.
partner bug for tracking: https://ticket.coreboot.org/issues/251
BUG=None
BRANCH=NONE
TEST='jslrvp' mainboard builds successfully
Change-Id: I097b2f3a4fef1a487495a4aa9d2bcf88aa64f017
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The new documentation describes typical ways that mainboards will
set up their GPIOs, as well as the distinction between "early"
and "normal" GPIOs. It also describes the typical properties
that GPIO configuration will cover.
Change-Id: I279eec4ed2bb0248a2bdb363fb73b40b8272267f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Code in SMM segment using cmos_post_code will give compiler error since
cmos_post_code function is not getting compiled during SMM stage.
Also as per patch discussion, CMOS uses a split IO transaction and it's not
really safe to call cmos_post_code from SMM context. Thus we'll hide the
call for SMM context.
Change-Id: Iffdcccaad48e7ad96e068d07046630fbe4297e65
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
