summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-05drivers/pc80/tpm: Fix missing tis_close() functionPhilipp Deppenwiese
tis_close() must be called after tis_open() otherwise the locked locality isn't released and the sessions hangs. Tested=PC Engines APU2 Change-Id: I1a06f6a29015708e4bc1de6e6678827c28b84e98 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/19535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-05soc/intel/apollolake: Use XDCI common codeSubrata Banik
This patch performs apollolake specific XDCI controller initialization. Change-Id: I4649bffe1bb90d7df6a72b5334793bf8f0fdbaeb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/common/block: Add Intel XDCI code supportSubrata Banik
XDCI MMIO offsets definitions are not alike between various SoCs hence provided "soc_xdci_init" function to implement SoC specific initialization. Change-Id: I9cbc686a00c26b92be2847b6bd6c2e5aa5a690f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/apollolake: Use intel/common/xhci driverSubrata Banik
Change-Id: Iccb6b6c8c002701d17444fcf62ec11315e5aeed9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05common/block/xhci: Get XHCI PCI ID from device/pci_ids.hSubrata Banik
Change-Id: I33d92a173055ea18b8675c720f01dd5bc77befa3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05common/block/cse: Use CSE PCH ID from device/pci_ids.hSubrata Banik
Change-Id: Ic92d17b2819c39997bbffff8293c937f3f73776b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05cr50: check if the new image needs to be enabled and act on itVadim Bendebury
The AP sends the Cr50 a request to enable the new firmware image. If the new Cr50 image was found and enabled, the AP expects the Cr50 to reset the device in 1 second. While waiting for the Cr50 to reset, the AP logs a newly defined event and optionally shuts down the system. By default the x86 systems power off as shutting those systems down is not board specific. BRANCH=gru,reef BUG=b:35580805 TEST=built a reef image, observed that in case cr50 image is updated, after the next reboot the AP stops booting before loading depthcharge, reports upcoming reset and waits for it. Once the system is booted after that, the new event can be found in the log: localhost ~ # mosys eventlog list ... 7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode 8 | 2017-03-23 18:42:13 | Unknown | 0xac 9 | 2017-03-23 18:42:21 | System boot | 46 ... Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-05pci_device: add PCI device IDs for Intel platformsRizwan Qureshi
Add host of PCI device Ids for IPs in Intel platforms. Change-Id: I0eee9409df3e6dc326b60bc82c2b715c70e7debd Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05ec/google/chromeec: provide reboot functionAaron Durbin
Provide a common function to issue reboot commands to the EC. Expose that function for external use and use it internal to the module. BUG=b:35580805 Change-Id: I1458bd7119b0df626a043ff3806c15ffb5446c9a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19573 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2017-05-05nb/intel/sandybridge/early_init: Use register namePatrick Rudolph
Use names instead of magic values. No functional change. Change-Id: I3774595ff0fd21e42dc407ca8a0cf3fd7788a66f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-05sb/intel/bd82x6x/bootblock: Use register namePatrick Rudolph
Use defines instead of magic values. No functional change. Change-Id: Idc90f254d7713f96a6e8b0389e34d860f461d9d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-05sb/intel/bd82x6x/finalize: Use register namePatrick Rudolph
Use register name instead of hex values. No functional change. Change-Id: I08fc8435f29ab87a0534946b0e0c43231919785d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-05nb/intel/sandybridge/romstage: Use register namePatrick Rudolph
Use register name instead of hex value. No functional change. Change-Id: Iacfe609f6454e6d58c9733f425377464238ce4a9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-05mb/google/poppy: Add eMMC as thermal sensorSumeet Pawnikar
This patch adds the eMMC as one of the thermal sensor under DPTF. Also, updates few comments for better interpretation and mapping. BUG=None BRANCH=None TEST=Built for poppy. Change-Id: I6d05bb7a2f857dc5bc98227c8327b2ff1bd5b913 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/19524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
This reverts commit 39b633b26d6d4cf185fbbdd5a256d0665409bd5b. Commit was accidentally pushed too early and broke the tree. I'll repush the original. Change-Id: Iaca6d43cc8fc0959565d5d151a330c0c7ba38309 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
TEST=Boot from scarlet, and mipi panel work Change-Id: Id5f81867ea50f72cc0bc13074627134e0dc198ba Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
Update the DPTF parameters based on thermal test result. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU passive point:83, critial point:99 TSR0 passive point:60, critial point:70 TSR1 passive point:50, critial point:90 TSR2 passive point:77, critial point:90 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 4W, max to 12W, and step size to 0.2W 3. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 5secs Change CPU Effect on Temp Sensor 0 sample rate to 60secs The TRT of TCHG is TSR1, but real sensor is TSR2. sample rate to 30secs Change Charger Effect on Temp Sensor 2 sample rate to 30secs Change CPU Effect on Temp Sensor 2 sample rate to 120secs BUG=None TEST=build and boot on electro dut Change-Id: I0ea0bab7fa6b0ad75d9ddacbd7cd882f91e4b0db Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05blobtool/ifd-x200.set: Fix flashmap0 NRArthur Heymans
NR indicates the last non empty region, which in this case is GbE (region3). Needed for flashrom ifd layout support. Change-Id: I3f4dcb0d41718dd176982679f8e045681fd3f486 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05soc/intel/skylake: Enable SATA portsShelley Chen
The current implementation is incorrect and is actually disabling the ports. Fixes that. BUG=b:37486021, b:35775024 BRANCH=None TEST=reboot and ensure that we can boot from SATA SSD. Change-Id: I8525f6f5ddfdf61c564febd86b1ba2e01c22d9e5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19553 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05google/fizz: Enable devices under pci 1c.0Shelley Chen
Turn on device 1c.0 in order to enable devices under it. BUG=b:37486021, b:35775024 BRANCH=None TEST=Boot from NVMe Change-Id: Ide66823283c58d2bea0c9886f762f0581741affe Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05intelmetool: handle failures to mmap MEI memoryPaul Wise
Fixes crashes when there is an error mapping memory. Error mapping physical memory 0x0000004275159040 [0x4000] ERRNO=1 Segmentation fault (core dumped) Change-Id: I5becc0c2870dd97297c4e8d1b101b95b31792ca7 Signed-off-by: Paul Wise <pabs3@bonedaddy.net> Reviewed-on: https://review.coreboot.org/19562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05intelmetool: free sb pci_dev struct allocated by pci_get_dev()Paul Wise
This fixes a memory leak in the activate_me() function. Change-Id: I011b2f96122d8f88aed121352afe3f0d41edef60 Signed-off-by: Paul Wise <pabs3@bonedaddy.net> Reviewed-on: https://review.coreboot.org/19561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05intelmetool: Print strerror() results for mmap errorsPaul Wise
These are more human readable for folks not familiar with errno values. Change-Id: I21352a00b583163472ccd3302a83adf1f8396c61 Signed-off-by: Paul Wise <pabs3@bonedaddy.net> Reviewed-on: https://review.coreboot.org/19560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-05-05mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASKFurquan Shaikh
This is required to ensure that SCI is generated whenever a host event is set for MODE_CHANGE. Thus, when wake from MODE_CHANGE event occurs, eSPI SCI is generated which results in kernel handler reading host event from the EC and thus causes the wake pin to be de-asserted. BUG=b:37223093 TEST=Verified that wake from mode change event works fine in suspend mode and there is no interrupt storm for GPE SCI after resume. Change-Id: I1dd158ea0e302d5be9bcaa531cd1851082ba59fd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jenny Tc <jenny.tc@intel.com>
2017-05-05mainboard/siemens/mc_apl1: remove unnecessary headerAaron Durbin
soc/i2c.h does not need to be included in this compilation unit. Change-Id: Ife11642d2e69af7235c93fc54bba38853b046169 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-05fsp_broadwell_de: Switch CPU to high frequency modeWerner Zeh
According to Yang York the FSP is responsible for switching the CPU into high frequency mode (HFM). For an unknown reason this is not done for the BSP on my platform though the APs are switched properly. This code switches the CPU into HFM which makes sure that all cores are in high frequency mode before payload is started. It should not harm the operation even if FSP was successful in switching to HFM. Change-Id: I91baf538511747d1692a8b6b359df5c3a8d56848 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04soc/intel/skylake: Remove unused skylake_i2c_config structureFurquan Shaikh
Remove struct skylake_i2c_config from chip.h since it is not used anymore. Change-Id: Icde4b7af5b9c31020099c1a6372a6867827f61ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-04mb/gigabyte/ga-b75m-d3h: add libgfxinit supportpersmule
Currently native video init works on port HDMI1 (wired to the on-board DVI-D socket) , HDMI3 (the on-board HDMI port), and the VGA port, both text mode and fb mode. Every ports works on GNU/Linux. Tested against an IVB cpu (i7-3770T). Change-Id: If00a7247df0c32b3d1f489fb92d86baaa8fdf8ba Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-04nb/intel/x4x/raminit: Change reset type on incomplete raminit resetArthur Heymans
The checkreset() function checks if raminit previously succeeded (pmcon2 bit7 == 0). If this is not the case it will issue a hot reset (writing 0x6 to 0xcf9). On the next attempt to boot the system BOOT_PATH_RESET path will be taken. This boot path can only successfully initialize memory if the system was reset from a state where raminit succeeded, which is not the case here. This can be fixed by issuing a cold reset instead of a hot reset. Change-Id: Idbcf034c3777a64cc3fb92dc603d10470a6c8cb6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-04mb/lenovo/x200: Make button on dock to undock workArthur Heymans
Fetched from vendor DSDT. Change-Id: Ib74408802e977d9caabcb815c9cbd06bd8dbe395 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kevin Keijzer <kevin@librepractice.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-04mb/google/eve: Remove code to set keyboard backlight at bootDuncan Laurie
Remove the code that was enabling the keyboard backlight at boot since this is not desired behavior for this device. BUG=b:35581264 TEST=build and boot on Eve and ensure keyboard backlight does not turn on when booting but can still be enabled in the OS. Change-Id: I7229cf962597c0de74dc005f7afb9408f7a66f42 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04mb/google/eve: Set SUSWARN# pin to native functionDuncan Laurie
Set GPP_A13/SUSWARN# pin mode to native function 1. This pin is tied to SUSACK# in the schematic and and is intented to be used in Deep Sx so it should not be configured for GPIO mode. BUG=b:35581264 TEST=build and boot on Eve platform, test that Deep S3 and Deep S5 are still functional. (this change should have no visible effect) Change-Id: Ie2dc24d095872ab93a5bfcbe5307c3b7a8e4dbcc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04intel/skylake: nhlt: Add 48Khz 2ch 16bit config for max98927Duncan Laurie
This changelist adds the 48Khz 2ch 16bit NHLT configuration for the Maxim 98927 speaker amplifier codec. BUG=b:35585307 TEST=manual testing to ensure speaker output is functional on Eve board Change-Id: Ieda988b557ecefdace5f81b474a952af56e69315 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19548 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-03Documentation/Intel: Add vboot documentationLee Leahy
Add documentation which describes how to build and sign a coreboot image which enables vboot. TEST=None Change-Id: Ie17b8443772f596de0c9d8afe6f4ec3ac4d4fef8 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
Board Scarlet doesn't use usbphy1. BUG=b:37685249 TEST=boot Scarlet, check the firmware log, and confirm no errors about USB1 Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03util/autoport: Add the PCI ID of the iGPU for the Intel i7 3770KOmar Pakker
This adds one of the Xeon labeled PCI IDs used in Sandy-/Ivy Bridge generation processors. This ID is used by the non-Xeon i7 3770K. Change-Id: Iad7745136efeb10ff745001413f4ccb6488b5ec0 Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/19516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-03drivers/{aspeed,xgi_z9s}/Kconfig: Don't override NATIVE_VGA_USE_EDIDArthur Heymans
device is run before drivers to generate .config and the first default takes precedence so this override achieves nothing. Change-Id: Ib8d333a53a0dadcc94e47ca5460b23d49cf7eb52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03nb/intel/gm45: Set display backlight according to EDID stringArthur Heymans
Add some known good values for some thinkpads displays. Known good means that at this pwm frequency the display is evenly lit on all duty cycles, the display makes minimal to no noise at lower duty cycles and the display does not flicker. This values differs from vendor (which uses an obviously wrong display clock (190MHz instead of 320MHz) resulting in frequency more than 60% off the intended value. TESTED on Thinkpad X200 with edid ascii string in list and removed from list to see if notice message is shown. Change-Id: Id7bc0d453fac31e806852206ba2c895720b2c843 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03lib/edid: Save the display ASCII stringArthur Heymans
Change-Id: Ic31af53dcb9947e2264c809ee8f80ea4f89f347d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03nb/intel/gm45/gma.c: Decode EDID before NGI pathArthur Heymans
This allows to use EDID data outside of NGI path without needing to fetch it twice. Change-Id: I6a540b1d036a9f38b44fd004309601630861f6e7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03lib/edid.c: Differentiate between absent and non-conformant EDIDArthur Heymans
Change-Id: Id90aa210ff72092c4ab638a7bafb82bd11889bdc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03lib/edid.c: Allow use of when not NGIArthur Heymans
Change-Id: I8709e3e61686979137b08d24efad903700d18e0b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03mainboard/google/poppy: Add support for cr50 I2C TPMFurquan Shaikh
1. Add support for using cr50 I2C TPM on poppy. This will not be enabled until the next build. 2. Also, configure GPIOs for SPI and I2C TPM only if the corresponding Kconfig options are set. BUG=b:36265511 TEST=Verified on a reworked board that I2C TPM communication works fine. Change-Id: I3b293b8d410a6973a6dfea393c17d0be425b6a28 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03mainboard/google/poppy: Update GPIO table for next buildFurquan Shaikh
Update GPIO table to match the schematics for next build. Change-Id: I949a14bfaa7972f2257a0b11ee81dcb0771e2f7f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-02cbmem: Add new command line flag to dump console for one boot onlyJulius Werner
Even though the persistent CBMEM console is obviously awesome, there may be cases where we only want to look at console output from the last boot. It's easy to tell where one boot ends and another begins from the banner message that coreboot prints at the start of every stage, but in order to make it easier to find that point (especially for external tools), let's put that functionality straight into the cbmem utility with a new command line flag. Use the POSIX/libc regular expression API to find the banner string for maximum compatilibity, even though it's kinda icky. Change-Id: Ic17383507a884d84de9a2a880380cb15b25708a1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19497 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-02soc/intel/apollolake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: Ifd72734dadda541fe4c828e4f1716e532ec69c27 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19080 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02soc/intel/skylake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: I4fc90504d322db70ed4ea644b1593cc0605b5fe8 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19055 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02soc/intel/skylake: Set xtal bypass on low power idleNaresh G Solanki
When using Wake On Voice &/or DCI, it requires xtal to be active during low power idle. With xtal being active in S0ix state power impact is 1-2 mW. Hence set xtal bypass bit in CIR31C for low power idle entry. TEST= Build with s0ix enable for Poppy. Boot to OS & verify that bit 22 of CIR31C register is set. s0ix works. Change-Id: Ide2d01536f652cd1b0ac32eede89ec410c5101cf Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19442 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02amd/pi/hudson: Add config option for ACPI baseMarc Jones
Add a configuration option to assign the binaryPI base address for the ACPI registers. The binaryPI's assignment is determine at build time and no run-time configuration is allowed. Change-Id: Ida17022abfa6faceb0653c2cb87aacce4facef09 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19485 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-02amd/pi/00670F00: Reserve A0000-FFFFFMarshall Dawson
Claim memory-mapped regions in the legacy area. Claim an MMIO resource for the A000 and B000 segments, and reserved resource for C000 through F000 segments. These changes allow code and information to be retained in the event unused regions get wiped. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit d612d4fe69881609d42053496409c452e1014947) Change-Id: I9c47c919bbfd0edccf752e052f32d1e47c1a1324 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19156 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-05-01cbgfx: Add portrait screen supportNickey Yang
cbgfx currently does not support portrait screen which height >width. so add it. Change-Id: I66fee6d73654e736a2db4a3d191f030c52a23e0d Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19474 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-01arch/x86: Share storage data structures between early stagesLee Leahy
Define a common area in CAR so that the storage data structures can be shared between stages. TEST=Build and run on Reef Change-Id: I20a01b850a31df9887a428bf07ca476c8410d33e Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19300 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-01soc/intel/common/block: Add Intel common FAST_SPI codeBarnali Sarkar
Create Intel Common FAST_SPI Controller code. This code contains the code for SPI initialization which has the following programming - * Get BIOS Rom Region Size * Enable SPIBAR * Disable the BIOS write protect so write commands are allowed * Enable SPI Prefetching and Caching. * SPI Controller register offsets in the common header fast_spi.h * Implement FAST_SPI read, write, erase APIs. Change-Id: I046e3b30c8efb172851dd17f49565c9ec4cb38cb Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01nb/intel/sandybridge/gma: Set up OpRegion in nb codePatrick Rudolph
Set up IGD OpRegion in northbridge and fill in GNVS' aslb. At this point GNVS already has been set up by SSDT injection. Required for future VBT patches that will: * Use ACPI memory instead of CBMEM * Use common implementation to locate VBT * Fill in platform specific values Change-Id: I97c3402ac055991350732e55b0dda042b426c080 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-01nb/intel/nehalem/gma: Set up OpRegion in nb codePatrick Rudolph
Set up IGD OpRegion in northbridge and fill in GNVS' aslb. At this point GNVS already has been set up by SSDT injection. Required for future VBT patches that will: * Use ACPI memory instead of CBMEM * Use common implementation to locate VBT * Fill in platform specific values Change-Id: I76b31fe5fd19b50b82f57748558fb04408e0fd23 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19309 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-01nb/intel/fsp_sandybridge/gma: Set up OpRegion in nb codePatrick Rudolph
Set up IGD OpRegion in northbridge and fill in GNVS' aslb. At this point GNVS already has been set up by SSDT injection. Required for future VBT patches that will: * Use ACPI memory instead of CBMEM * Use common implementation to locate VBT * Fill in platform specific values Change-Id: Ie5d93117ee8bd8d15085aedbfa7358dfcf5f0045 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19307 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-01mb/*/mainboard.c: Get rid of SPI AFC registerPatrick Rudolph
The AFC—Additional Flash Control Register is set by southbridge code. Remove redundant calls and get rid of it in autoport. Change-Id: I627082e09dd055e3b3c4dd8e0b90965a9fcb4342 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19493 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01mainboard: add support for lenovo x1 carbon gen 1Alexander Couzens
Based on Thinkpad x230 and schematics. Verified by autoport. USB debug port is the left front usb port Thanks to Holger Levsen for the device. Change-Id: I97c8e01a3ce0577d7dc9e8df7d33db3b155fe3d6 Tested-on: lenovo x1 carbon gen 1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16994 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01acpi: fix FADT header version for ChromeOS devicesMatt DeVillier
Haswell, Broadwell, Baytrail, and Braswell ChromeOS devices' FADT version were incorrectly set to 3, rather than the correct ACPI_FADT_REV_ACPI_3_0. The incorrect value resulted in these devices reporting compliance to ACPI 2.0, rather than ACPI 3.0. This mirrors similar recent changes to SKL and APL SoCs. Test: boot any affected device and check ACPI version reported vai FADT header using OS-appropriate tools. Change-Id: I689d2f848f4b8e5750742ea07f31162ee36ff64d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19498 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-01pci_device: Write vendor ID to subsystem vendor IDRizwan Qureshi
Write vendor/device id to subsystem vendor/device id if they are not provided. Change-Id: I5027331a6adf9109767415ba22dfcb17b35ef54b Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19467 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-01Documentation: Add technote/design doc for mitigating ReBAR issuePatrick Georgi
Change-Id: Icba9d7910dfd46f32a2c46b6fd064a9cc8e3beac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19242 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-05-01intel/kblrvp: Enable audio in RVP7 and RVP3Naresh G Solanki
Enable audio: * Add verb table for ALC286 & ALC298 * Enable virtual channel 1 for DmiVc1 & HdaVc1. TEST= Build for kblrvp3 as well as kblrvp7. Boot to OS & verified working of audio on both the boards. Change-Id: Id27e3cf585b93ed4131d7bf3d3b53d3f5404b18e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18875 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01soc/intel/skylake: Add ID for Fizz i7Shelley Chen
Bug=b:35775024 BRANCH=None TEST=boot up successfully to kernel on Fizz i7 sku Change-Id: Iccf9fbef1333f3fea78091b679c2676411559987 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19486 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01purism/librem13: Enable support for M.2 NVMeYouness Alaoui
Enable/Disable the PCIe ports to match factory BIOS. The port #6 is used for PCIe on the M.2 connector which allows for NVMe SSDs to function. Change-Id: I8058cbad3da651144545d588c0ae78c5f5e598ac Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19446 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01util/inteltool: Add support for Wildcat Point-LP PremiumYouness Alaoui
The Wildcat Point-LP Premium is handled the same as the Wildcat Point-LP, but it wasn't supported by inteltool. Change-Id: I694514e1963f074582a3f5f81d63c20e7fa49189 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19445 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01util/inteltool: Break long lines in supported_chips_listYouness Alaoui
Lint prevents my next commit which adds a new line to the table so it's better to break all the > 80 character lines so it will be consistent with the new line I'm about to add. Change-Id: Ic7ad0cb90e861cd830db1186225d4f839250792a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19444 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-29libpayload/gdb: fix unused variable warningPatrick Georgi
input_underrun is defined but not used. A reasonably new compiler, enabled warnings and warnings-as-error make the build break for no good reason. Change-Id: Ibeb7ba53aad5738938093ab7b34695c9c99c9afe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19482 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-04-29vboot: Separate board name and version number in FWID with a dotJulius Werner
It's standard practice in vboot that the FWID consists of <board_name>.<version_number> (e.g. Google_Kevin.8785.57.0). In fact, some tools rely on this and cut the string at the first dot to separate the two. The current Kconfig default in coreboot instead leads to ugly, parser-breaking FWIDs like Google_Kevin4.5-1234-5678abcd. This patch fixes that. Change-Id: I65cd5285c69e2e485d55a41a65d735f6a2291c16 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19487 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-29rowan: Fix default test HWID.Patrick Berny
Correct the default GBB_HWID to "ROWAN TEST 9387" BRANCH=chromeos-2016.05 BUG=b:35774871 TEST=emerge-rowan coreboot chromeos-bootimage, strings /build/rowan/firmware/image.bin | grep "ROWAN TEST" and look for 9387 in output Change-Id: I7851010305caf056958c8a6a328b0506bf2208cd Signed-off-by: Patrick Berny <pberny@chromium.org> Reviewed-on: https://review.coreboot.org/19488 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
BUG=b:37712455 Change-Id: I3209aaef774712edab5e9f656ee84bfb6917b1c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19472 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-28mainboard/google/poppy: Add SPDs for memory config 1 and 2Furquan Shaikh
BUG=b:37712790 Change-Id: I7764b4ec55b0beea82eeb6c379ef38ceeb1fb04e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28mainboard/google/poppy: Enable separate MRC cache for recovery modeFurquan Shaikh
Enable separate MRC cache for recovery mode. This requires change in flash layout to accomodate another region for RECOVERY_MRC_CACHE. BUG=b:37682566 TEST=Verified following scenarios: 1. Boot into recovery does not destroy normal mode MRC cache. 2. Once recovery MRC cache is populated, all future boots in recovery mode re-use data from the cache. 3. Forcing recovery mode to retrain memory causes normal mode to retrain memory as well. Change-Id: I4c748a316436001c5a33754084ab4a74243e21df Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19457 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28commonlib: Add ID for STORAGE_DATALee Leahy
TEST=Build and run on Reef Change-Id: I2f04a01e5e266422e3ef0d90541dc9d39471260c Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19301 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28sb/nvidia/mcp55: Link early_ctrl.cArthur Heymans
Change-Id: I3a55c2e8077fdb10768df287f38efcd5e2e64bdf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19365 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28nb/amd/amdk8: Link reset_test.cArthur Heymans
This needs some extra headers in amdk8/raminit.c that were otherwise provided by that file. Change-Id: I80450e5eb32eb502b3d777c56790db90491fc995 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19360 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28vboot: Select CONFIG_{TPM,TPM2} only if MOCK_SECDATA is not selectedFurquan Shaikh
1. Select CONFIG_{TPM,TPM2} only when MOCK_SECDATA is not selected. 2. Provide tlcl_lib_init for mock TPM case. BUG=b:37682566 TEST=Verified that when mock TPM is used, CONFIG_TPM is not set anymore in coreboot config. Change-Id: If3bdd1528e153b164e9d62ee9cbcc4c3666b8b66 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19456 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-28soc/intel/skylake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Ibe65a92f1604277bec229c67f4375b6636c0972d Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19244 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/apollolake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Id265505cfc106668aea25ad93e114fe20736b700 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19236 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/common/block: Add Intel common ITSS code supportBarnali Sarkar
Create Intel Common ITSS code. This code currently only contains the code for Interrupt initialization required in Bootblock phase. More code will get added up in the subsequent phases. Change-Id: I133294188eb5d1312caeafcb621fb650a7fab371 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19125 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/apollolake: fix system reset eventlogAaron Durbin
The SRS bit which is supposed to indicate reset button press is non-functional. If it did work the system reset event it was associated with is overly specific. Therefore, use the warm reset status bit. BUG=b:37687843 Change-Id: I34dd09c03d2bca72da9a5cdf23121e0d0e621fa6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19484 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/apollolake: work around full retrain constraints on warm resetAaron Durbin
It's come to attention that apollolake doesn't support a full retrain on warm reset. Therefore force a cold reset when a full retrain is requested in the non-S5 path. BUG=b:37687843 Change-Id: If9a3de1fa8760e7bb2f06eef93a0deb9dbd3f047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19483 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/apollolake: Update default LPDDR4 CA ODT configRavi Sarawadi
Update default ODT config to have correct CA ODT settings as the current defaults are incorrect for all the current apollolake designs. All the current designs pull both A and B channels' LPDDR4 modules' ODT pins to 1.1V. Therefore, the correct impedance setting needs to be applied. In order for the settings to take effect one needs to clear the memory training cache in deployed systems. Trigger this by bumping the memory setting version for the SoC. If needed in the future support for allowing the override of this setting from the mainboard should be straight forward. It's just not necessary at this time. BUG=b:37687843 TEST=BAT test, warm, reboot, S3 cycle test Change-Id: I9a2f7636b46492a9d08472a0752cdf1f86a72e15 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19397 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-28drivers/intel/fsp2_0: add option to incorporate platform memory versionAaron Durbin
On Chrome OS systems a memory setting change is needed to be deployed without updating the FSP blob proper. Under such conditions one needs to trigger retrain of the memory. For ease of use provide an option, FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS, which incorproates the SoC and mainboard memory setting version number into the FSP version passed to the platform. The lower 8 bits of the FSP version are the build number which in practice is normally 0. Use those 8 bits to include the SoC and mainboard memory settings version. When FSP, SoC, or mainboard memory setting number is bumped a retrain will be triggered. BUG=b:37687843 Change-Id: I6a269dcf654be7a409045cedeea3f82eb641f1d6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19452 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: I756513f02ac13e159d5b8b1ac2346fa42cf3c219 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cf18ed7b8fdf11594f812e5c48a2bd0fde5cb820 Original-Change-Id: I50c053ab7a6f6c14daee4fb2ab1cdcaeee2d67da Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/452286 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19434 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-28rockchip: gpio: add gpio_input_irq & gpio_irq_statusJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: I5de902ab26fe768b641f69d85a5294baf6d916e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 223257d486b026c06a1f3a7a830b829efb9932dc Original-Change-Id: I055ad5f59285cee3110d1e7cb1a53a60144712e4 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/452285 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19433 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-28google/oak: Configure SD card detect pin with a pull-upJulius Werner
SD card detect pins should normally have a pull-up. It seems that for micro-SD cards this doesn't really matter all that much, but for the full-size slots we have on some Oak-derivatives (like Hana) it does. BRANCH=oak BUG=b:35854317 TEST=Booted Hana, confirmed that card detect no longer seemed stuck-on. Booted Elm and confirmed that SD card behavior didn't change. Change-Id: I9b20e0f6fe310e724d191e36ca0a81ab4fe5f593 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c2781eeef50f52c6f02ee9344274ddf4dcb0a946 Original-Change-Id: I428ac92efb07f94265673b04e0e0dd452649b9fd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/452861 Original-Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/19432 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-28crossgcc: disable libsanitizer for the bootstrapped compilerPatrick Georgi
Ironically enough, libsanitizer is notorious for creating "uninitialized variable" warnings with different compiler versions than the one it's shipping with. Since we don't need it for building the real compiler, just skip it. Fixes building our compilers using the gnat-gpl 2014 compilers. Change-Id: I2130dfdf3eaf07d77cd70777419fc0ae4642b843 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19478 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-28fsp_broadwell_de: Add SMM codeWerner Zeh
Add basic SMM support for Broadwell-DE SoC. The code is mainly based on the SMM implementation of Broadwell with a few differences: - EMRR is now called PRMRR and the UNCORE part of it is not available - SMM_FEATURE_CONTROL is no longer a MSR but is now located in PCI space - currently only SERIRQ-SMI has a handler Change-Id: I461a14d411aedefdb0cb54ae43b91103a80a4f6a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19145 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28intel/skylake: Switch FADT to ACPI version 3.0Werner Zeh
On Apollo Lake it was discovered that our current FADT implementation is valid for ACPI version 3.0 but misses fields for ACPI version 5.0. We run into booting issues with Windows 10 using version 5 in the FADT header. In commit 2b8552f49bc3a7d0290f96a84b573669de396011 (intel/apollolake: Switch FADT to ACPI version 3.0) we go back to version 3 for Apollo Lake. Skylake is now the last platform that uses version 5 in FADT header. Change-Id: I2d0367fae5321dee4ccac417b7f99466f8973577 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28intel/apollolake: Switch FADT to ACPI version 3.0Werner Zeh
The current implementation of the FADT structure is only ACPI 3.0 compliant. Setting the version to ACPI 5.0 results in a corrupt FADT. Linux seems to be able to deal with it but Windows 10 hangs in a really early stage without any notification to the user. If ACPI 5.0 is mandatory, the FADT structure needs to be adjusted to match the specification. Therefore the members sleep_ctl and sleep_stat needs to be added to FADT structure. Change-Id: I51c7a7a84d10283f5c2a8a2c57257d53bbdee7ed Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19146 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28build system: when cleaning the tree, remove ..config.tmp*Patrick Georgi
kconfig uses mktemp so ..config.tmp isn't enough. Change-Id: If910a40269783bbf7392b44cda7e9750bc33f14d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19459 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-27amdfwtool: Move normal firmware 2 after fanless firmware2sMarc Jones
Move the images around in the image stitching. This addresses an issue found with PSP firmware loading on the Google Kahlee mainboard. Note firmware1 must come before firmware2 in the image or the PSP will not allow APU to execute. Change-Id: I85963fa93d6efd707cedfbc04b92d302ad5de3b1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19170 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-27mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c deviceWei-Ning Huang
The new touchpad firmware uses i2c-hid instead of custom reporting protocol. The touchpad also exposed another slave address (0x1e) for kernel to communicate with the touchpad EC. Change-Id: Iecaf14f7b8aed836120569e9ade9c3115bc00264 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19461 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-27cpu/amd/pi: Change wrapper to use config optionMarshall Dawson
Add a check for vboot when locating the binaryPI image. There is currently an ordering problem using cbmem to locate the image when vboot is present. Vboot inserts its locator into the search process so that memory can be checked before flash is queried. For the earliest calls using the wrapper, DRAM has not been set up and cbmem not initialized in romstage. This change prevents an endless loop when vboot searches cbmem. This change has another side effect. When vboot is in effect, the change forces the RO binaryPI to be used even when on either of the RW paths. There is currently no ability to relocate the XIP image for use in a RW region. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 6efe9217c38cf93fd9b38e52cf3ec90fee3d0474) Change-Id: I0c14bd729f8a67bca37cbdbd3a5e266c99c86d54 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18438 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-27x86/acpi: Use initialized VBIOS in VFCT tableMarshall Dawson
AMD VBIOS option ROMs often modify themselves during initialization. Check for the presence of a VBIOS at 0xc0000 before populating the VFCT table. If a matching ROM is found, use it for the source of the copy. Tested on Gardenia (Stoney) variant by observing amdgpu driver's dmesg output. Change-Id: I5be7e1562bde51800c5b0e704c79812d85bcf362 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19383 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-27crossgcc: fix DESTDIR buildsPatrick Georgi
We need to rewrite libtool's files (foo.la) a couple of times so it knows where to look (while still whining that $DESTDIR$TARGET != $TARGET. well, duh.) Change-Id: I54cafd47c76d855222ba905b5eb4533a23bdfd34 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19463 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-27google/poppy: Enable PD MCU deviceShamile Khan
In order for PD charge events to properly notify the OS when a charger is attached we need to enable the PD MCU device and event source from the EC. Without this change the charging still happens, but the OS does not notice and update the charge state icon in the Chrome OS UI. BUG=b:35586577 BRANCH=none TEST=On a poppy board that has the VBUS rework applied, plug in a charger to either port and see charge status updated to indicate charging in the power_supply_info tool and the Chrome OS UI. Change-Id: I59dcfc1cb5d11841f56cac7f4ffe461c2f9ec52a Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/19441 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-04-27amd/pi/hudson: Add VBNV cmos reset optionMarc Jones
If the mainboard supports VBNV, call init_vbnv_cmos() instead of the normal init_cmos(). The VBNV version does some VBNV pre and post setup around the normal init_cmos(). Change-Id: I34b02409019b945cd68c830e006e99338643f29c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19399 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-27i82801gx: Enable PCI-to-PCI bridgeKyösti Mälkki
Once the PCI command register is written the bridge forwards future IO and memory regions, as programmed in the respective base and limit registers, to the secondary PCI bus. Since the LPC function claims the resources for IOAPIC, ROM and low IO (0x0-0xfff) in its read_resources() call, the PCI-to-PCI configuration will not overlap those regions and does not hide the resources mentioned in the original comment. The bridge was disable in the following commit [1] commit a8e1168064b34b46494b58480411a11bc98340f6 Author: Stefan Reinauer <stepan@coresystems.de> Date: Wed Mar 11 14:54:18 2009 +0000 This patch contains some significant updates to the i82801gx component and will be required for a series of later patches. Roughly it contains: but unfortunately it was not noted which system this caused problems with. [1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=a8e1168064b34b46494b58480411a11bc98340f6 Change-Id: I75128d83a344f4a0e09a3ea623c7f92a016ebfb9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/2706 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 16:59:08 +0000