Age | Commit message (Collapse) | Author |
|
This ports the changes to the way the fch_pic_routing and
fch_apic_routing arrays get populated from Mandolin to Guybrush, Skyrim
and Zork. This is a preparation to move the init_tables implementation
to the common AMD SoC code in a later patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie550238dfa0d4c7cebe849966d40fa0b1984a0f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This ports the changes to the way the fch_pic_routing and
fch_apic_routing arrays get populated from Mandolin to Bilby, Birman,
Chausie and Majolica. This is a preparation to move the init_tables
implementation to the common AMD SoC code in a later patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia957056b60dafbc52a9809a4563a348ad7443376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Make sure that the intr_index is valid to avoid out-of-bounds writes to
the fch_pic_routing and fch_apic_routing arrays.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45ab115f3814b212243c4f6cf706daf77b6ff3b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Introduce mb_get_fch_irq_mapping to access the FCH IRQ routing mapping
information and use it in init_tables to get the mapping instead of
directly accessing the array's contents. This is a preparation to move
the init_tables implementation to the common AMD SoC code in a later
patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c39ea9de5ebbf70d2c5a87bfdfe270796548c5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Use the same fch_irq_map name in all mainboards using the Picasso,
Cezanne, Mendocino and Morgana instead of using a mainboard-specific
name.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I035cffb9c6c8afd6bd115831e8eed4a395e2a7fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
string.h defines the memset function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I286557d6ad83990bc101eaa930bde04345859c0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
string.h defines the memset function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I242a0382e7020681b6c3a25f75a2a91cbccbe815
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Enable GPP clk req disabling for disabled PCIe devices. If a clk req
line is enabled for a PCIe device that is not actually present and
enabled then the L1SS could get confused and cause issues with
suspending the SoC.
BUG=b:250009974
TEST=Ran on skyrim proto device, verified that clk reqs are set
appropriately
Change-Id: I6c840f2fa3f9358f58c0386134d23511ff880248
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently the GPP clk req configuration code assumes that the size of
the config array is `GPP_CLK_OUTPUT_COUNT`. This commit changes that
code to use the `ARRAY_SIZE` macro instead.
BRANCH=guybrush
BUG=b:250009974
TEST=Ran on nipperkin device, verified that clk req settings are
correct.
Change-Id: I3ff555843c6f5aa38acd8300e0dc2da4e33fb4b7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Factor out the `gpp_dxio_update_clk_req_config` function as it will be
useful for other AMD SoCs.
BUG=b:250009974
TEST=Ran on nipperkin device, verified clk req settings match enabled
devices
Change-Id: I9a4c72d8e980993c76a1b128f17b65b0db972a03
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of using magic constants for the fch_pic_routing and
fch_apic_routing array sizes, define FCH_IRQ_ROUTING_ENTRIES in the
common code headers and use this definition. This also allows to drop
the static assert for the array sizes. In the Stoneyridge mainboard code
the equivalent arrays are named mainboard_picr_data and
mainboard_intr_data; also use FCH_IRQ_ROUTING_ENTRIES as fixed array
size there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d7ee46bd013ce413189398a144e46ceac0c2a10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68818
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the fch_irq_routing struct once in a common header file instead
of in every mainboard's code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I11d9000b6ed7529e4afd7f6e8a7332c390da6dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68817
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable RO verification by GSC and CBFS verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 verstage and PSP verstage.
Change-Id: Idd22a521a913705af0d2aca17acd1aa069a77f29
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
CBFS verification on boards where VBOOT starts before bootblock eg. PSP
verstage has been accommodated by keeping metadata hash outside the
bootblock. Hence the dependency can be removed.
BUG=b:227809919
TEST=Build and boot to OS in skyrim with CBFS verification enabled using
both x86 verstage and PSP verstage.
Change-Id: I0a3254728a51a8ee7d7782afcea15ea06d93da7d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66947
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Crypto engine prefers the buffer from SRAM. CBFS verification may pass
the mapped address of a CBFS file from SPI flash. This causes PSP crypto
engine to return invalid address. Hence if the buffer is from SRAM, pass
it directly to crypto engine. Else copy into a temporary buffer before
passing it to crypto engine.
BUG=b:b:227809919
TEST=Build and boot to OS in skyrim with CBFS verification enabled using
both x86 verstage and PSP verstage.
Change-Id: Ie9bc9e786f302e7938969c8093d5405b5a85b711
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia40678019b2a54deb246dbfbf33ec37a8c3839e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Idd78271f2158bdc29ce9ac8d81f46ad8cbe84c5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I01c6651079333686cb0eb68e89e56d7907868124
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie760711916c49d275ca49d94b9597fd24b5e7628
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ieba5a5291209e50dc8b3816efb25bb5b2515fa6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id2db229dec2ed44333faaa8c53f3a2f9d66d52e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add region/range of SPI ROM to be verified by Google Security Chip
(GSC).
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: If8a766d9a7ef26f94e3ab002a9384ba9d444dd1f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Do not compress PSP BIOS image when CBFS verification is enabled.
Otherwise when a file is added to CBFS, cbfstool is not able to find the
metadata hash anchor magic in the compressed PSP BIOS image.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled for
both x86 and PSP verstage.
Change-Id: Iaed888b81d14ede77132ff48abcfbeb138c01ce4
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With CBFS verification enabled, CBFS file header + file name + metadata
consumes more than 64 bytes. Hence reserve additional space aligned to
the next 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: I2b7346e2150835443425179048415f3b27d89d89
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66944
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change ensures that amdfw.rom binary containing metadata hash
anchor is added before any file is added to CBFS. This will allow to
verify all the CBFS files that are not excluded from verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 and PSP verstages.
Change-Id: Id4d1a2d8b145cbbbf2da27aa73b296c9c8a65209
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Metadata Hash is usually present inside the first segment of BIOS. On
board where vboot starts in bootblock, it is present in bootblock. On
boards where vboot starts before bootblock, it is present in file
containing verstage. Update cbfstool to check for metadata hash in file
containing verstage besides bootblock.
Add a new CBFS file type for the concerned file and exclude it from CBFS
verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 and PSP verstages.
Change-Id: Ib4dfba6a9cdbda0ef367b812f671c90e5f90caf8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66942
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To enable RO CBFS verification in AMD platforms with PSP verstage,
metadata hash for RO CBFS is kept as part of verstage. This means any
updates to RO CBFS, before WP is enabled, requires updating the
metadata hash in the verstage. Hence keep the metadata hash outside the
signed range of PSP verstage. This means the metadata hash gets loaded
as part of loading PSP verstage while still being excluded from the
verification of PSP verstage.
This change keeps the metadata hash outside the PSP footer data. This
will help to keep it outside the signed range of PSP verstage & aligned
to 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled with
both x86 and PSP verstage.
Change-Id: I308223be8fbca1c0bec8c2e1c86ed65d9f91b966
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68135
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On boards where vboot starts before bootblock, build metadata_hash in
verstage. This will allow to enable CBFS verification for such
platforms.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 verstage and PSP verstage.
Change-Id: I4269069b66ed66c7b1a47fdef2fd0a8054b2e6a1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68134
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add build rules to build amdfwread tool. Also mark this as a dependency
either while building tools or amdfw.rom.
BUG=None
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3fee4e4c77f62bb2840270b3eaaa58b894780d75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66939
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to walk through PSP L1, PSP L2, BIOS L1, BIOS L2 directories
and list the entries present in them. Accommodate both recovery A/B
layout and normal layout. This is required to identify the location and
size of each entries in the finally built amdfw.rom. This in turn can be
used to perform any platform specific verification on the relevant
components.
BUG=None
TEST=Build and list the contents of AMDFW binary.
/usr/bin/amdfwread --ro-list /build/skyrim/firmware/image-skyrim.bin
Table: FW Offset Size
PSPL1: Dir 0x00d97000
+-->PSPL1: 0x48 0x00d98000 0x00001000
+-->PSPL2: Dir 0x00c30000
+-->PSPL2: 0x00 0x00c31000 0x00000440
+-->PSPL2: 0x01 0x00c31500 0x00007580
+-->PSPL2: 0x02 0x00c38b00 0x00019470
+-->PSPL2: 0x08 0x00c52000 0x0001f560
+-->PSPL2: 0x09 0x00c71600 0x00000440
+-->PSPL2: 0x0b 0x430000041(Soft-fuse)
+-->PSPL2: 0x0c 0x00c71b00 0x00023100
+-->PSPL2: 0x12 0x00c94c00 0x00015890
+-->PSPL2: 0x13 0x00caa500 0x000021c0
+-->PSPL2: 0x20 0x00cac700 0x00000640
+-->PSPL2: 0x21 0x00cace00 0x00000030
+-->PSPL2: 0x22 0x00cad000 0x00001000
+-->PSPL2: 0x24 0x00cae000 0x00003b60
+-->PSPL2: 0x28 0x00cb1c00 0x00022890
+-->PSPL2: 0x2d 0x00cd4500 0x00003100
+-->PSPL2: 0x30 0x00cd7600 0x0006b550
+-->PSPL2: 0x3a 0x00d42c00 0x000006d0
+-->PSPL2: 0x3c 0x00d43300 0x000018c0
+-->PSPL2: 0x44 0x00d44c00 0x00006610
+-->PSPL2: 0x45 0x00d4b300 0x00001c70
+-->PSPL2: 0x50 0x00d4d000 0x00001a00
+-->PSPL2: 0x51 0x00d4ea00 0x00001020
+-->PSPL2: 0x52 0x00d4fb00 0x00010180
+-->PSPL2: 0x55 0x00d5fd00 0x00000600
+-->PSPL2: 0x5a 0x00d60300 0x00000570
+-->PSPL2: 0x5c 0x00d60900 0x00000b20
+-->PSPL2: 0x71 0x00d61500 0x00024710
+-->PSPL2: 0x73 0x00d85d00 0x00010640
+-->PSPL2: 0x8d 0x00d96400 0x00000030
+-->PSPL2: 0x49 0x00d99000 0x00001000
+-->BIOSL2: Dir 0x00d99000
+-->BIOSL2: 0x60 0x00d9a000 0x00009924
+-->BIOSL2: 0x68 0x00da4000 0x00009924
+-->BIOSL2: 0x61 0x2001000(DRAM-Address)
+-->BIOSL2: 0x62 0x00dada00 0x00010000
+-->BIOSL2: 0x63 0x00000000 0x0001e000
+-->BIOSL2: 0x64 0x00db4200 0x00006310
+-->BIOSL2: 0x65 0x00dba600 0x000004e0
+-->BIOSL2: 0x64 0x00dbab00 0x00006180
+-->BIOSL2: 0x65 0x00dc0d00 0x00000250
+-->BIOSL2: 0x6b 0x201f000(DRAM-Address)
+-->PSPL1: 0x4a 0x00d98000 0x00001000
Change-Id: Ia1b8f1a2b9bc7dc6925a305cdff1442aaff182cd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66761
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Upcoming AMD SoCs use recovery A/B layout. Update amdfwread tool to
handle it.
Also add a generic read_header function to read different header types.
BUG=None
TEST=Run amdfwread tool against both Skyrim and Guybrush BIOS images to
dump the Softfuse entry.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I6576eaebc611ab338885aed2ee087bf85da3ca15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Optional arguments that involve printing information from the firmware
image is mapped to bit fields with bit 31 set. But instead of just
setting bit 31, bits 27 - 31 are set. Fix AMDFW_OPT* bit mask.
BUG=None
TEST=Build and use amdfwread to read the Soft-fuse bits from Guybrush
BIOS image. Observed no changes before and after the changes.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0d88669bace45f3332c5e56527516b2f38295a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66573
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* AMD_ADDR_PHYSICAL refers to physical address in the memory map
* AMD_ADDR_REL_BIOS is relative to the start of the BIOS image
* AMD_ADDR_REL_TAB is relative to the start of concerned PSP or BIOS
tables
Update the relative_offset implementation accordingly. Though
AMD_ADDR_REL_SLOT is defined it is not used. Removing that to simplify
the relative_offset implementation so that it can be used for both PSP
and BIOS firmware tables. Hence update the relative_offset function
signature as well.
BUG=None
TEST=Build and use amdfwread to read the Soft-fuse bits from Guybrush
BIOS image. Observed no changes before and after the changes.
Change-Id: I74603dd08eda87393c14b746c4435eaf2bb34126
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ic1d407eab8ec4569e02729afb5c71f39ce174401
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68815
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only edk2 used this to fill in a different struct but even there the
entries go unused, so removing this struct element from coreboot has
no side effects.
Change-Id: Iadd2678c4e01d30471eac43017392d256adda341
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as kano is using a converged firmware image.
BUG=b:253337338
BRANCH=firmware-brya-14505.B
TEST=Cherry-pick Cq-Depends, then "FW_NAME=kano emerge-brya
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
disable hardware write protect and software write protect,
flash and boot kano in end-of-manufacturing mode to kernel.
Cq-Depend: chrome-internal:5046060, chromium:3967356
Change-Id: I75da3af530e0eafdc684f19ea0f6674f6dc10f01
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The Atlas board has currently the problem that suspending the System
causes the System to freeze. Therefore disable S3, until the cause is
figured out and fixed.
Change-Id: I5b28787df9b01683fcd4a1de8267840a80bb4fe6
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68591
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves DRIVERS_INTEL_USB4_RETIMER config from Meteor Lake
SoC to Rex mainboard to maintain the symmetry with previous
generation ChromeOS devices (Brya and Volteer).
BUG=none
TEST=Able to build and boot to Google/Rex with USB4 functionality
remaining intact.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I38360f6f1f2fcb4b0315de93c68f00d77e63003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Pre-sandy bridge hardware is likely affected by the sinkhole
vulnerability. Intel sandy bridge and newer has hardware mitigations
against this attack according to
https://github.com/xoreaxeaxeax/sinkhole.
Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds the initial framework for the Glinda SoC, based on what's been
done for Morgana already.
I believe that there's more that can be made common, but that work will
continue as both platforms are developed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I43d0fdb711c441dc410a14f6bb04b808abefe920
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add system agent ID for RPL QDF# Q271
TEST=Tested by ODM and "MCH: device id a71b (rev 01) is Unknown" msg is
gone
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Change-Id: I6fd51d9915aa59d012c73abc2477531643655e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update devicetree based on the schematic_20221014.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ia03962b0e01394ddcd4971cbe0172ef5bd913e15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68482
Reviewed-by: Chao Gui <chaogui@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Move the Raydium touchscreen to the baseboard devicetree. Since only the
liara variant uses a level IRQ as I2C devices are supposed to, all other
board variants still override this to use an edge IRQ which were added
as a workaround to make the touchscreen work on the other devices. Right
now it's unclear to me if that edge IRQ workaround was only needed
temporarily and can now be removed, so I'll keep it as it was for now.
If this turns out to be no longer needed on the other variants, the
overrides can be dropped in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic621c1a5856e9e280a25b0668010a1ee5bbb61e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68770
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add a post-code call that SoCs can hook to output or save in any way
that is specific to that SoC.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0369e4362840d7506d301105d8e1e2fd865919f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0e06ac5f92109757143897f3d331aeea0cefe4b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I0081fcf3c842d8772a7045f8dc5754a2e6c039b8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change-Id: I9c75e900d05d16de830c750f074df84bb17f64dc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
PS2K device needs to be under PCI0, not LPCB, for Windows to
recognize it. Same change was made to ChromeEC previously.
Test: Boot Win11 on Drallion, verify built-in keyboard functional.
Change-Id: I12019592dfa1d869ba57c1ff6c25ac6bdeb7a300
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68463
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
When CONFIG_DEBUG_SMI is enabled SMM handler performs console hardware
initialization that may interfere with OS. Here we store the state
before console initialization and restore state before SMM exit.
Tested=On not public yet system, after exiting smm, uart console can
still work well.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifa5042c24f0e3217a75971d9e6067b1d1f56a484
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Interrupt Identification Register (IIR) is a I/O read-access register.
Add definition of FIFO enabled for this register so that we can check
whether FIFO is enabled or not.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I12e8566822693004418cf83cae466dc3e2d612c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68566
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Shimlayer recipe requires OBJCOPY, so declare it at the top of
the Makefile so this recipe works as intended.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2e04dfe18df6252261836dcdf98f7e8de65287b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
After some measurements it turned out that Elkhart Lake uses a higher
CSR clock internally from which the MDIO clock is derived. In order to
stay compliant with the specification, the MDIO clock needs to be lower
than 2.5 MHz. Therefore, the divider needs to be 102 and not 62.
This patch changes the define to match the new divider value and uses
this new define at the appropriate place.
Test=Measure the MDIO clock rate on mc_ehl2 which results in 2 MHz.
Change-Id: Idf498c3547530dfa395f54488ef244e787062e34
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The highly real time driven application executed on mc_ehl1 has shown
that the L1 prefetcher on Elkhart Lake is too aggressive which in the
end leads to an increased number of cache misses. Disabling the L1
prefetcher boosts up the performance (in some cases by more than 10 %)
in this specific use case.
Change-Id: Id09a7f8f812707cd05bd5e3b530e5c3ad8067b16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68668
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Depending on the real workload that is executed on the system the L1
prefetcher might be too aggressive and will populate the L1 cache ahead
with data that is not really needed. In the end, this will result in a
higher cache miss rate thus slowing down the real application.
This patch provides a devicetree option to disable the L1 prefetcher if
needed. This can be requested on mainboard level if needed.
Change-Id: I3fc8fb79c42c298a20928ae4912ee23916463038
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68667
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For MT8188, the SPDX identifiers are all GPL-2.0-only OR MIT, so
replace "GPL-2.0-only" with "GPL-2.0-only OR MIT".
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5ef6c488b7ef937f6e298670ea75d306b9fe7491
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68759
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add eDP panel power-on sequences and initialize the display in the
ramstage.
eDP panel in MT8188 EVB: "IVO R140NWF5 RH".
Panel spec name: R140NWF5 RH Product Specification
Firmware display eDP panel logs:
configure_display: Starting display initialization
SINK DPCD version: 0x11
SINK SUPPORT SSC!
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 26 cf 7d 05 00 00 00 00 00 1e
version: 01 04
basic params: 95 1f 11 78 0a
chroma info: 76 90 94 55 54 90 27 21 50 54
established: 00 00 00
standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: 38 36 80 a0 70 38 20 40 18 30 3c 00 35 ae 10 00 00 19
descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 3: 00 00 00 fe 00 49 6e 66 6f 56 69 73 69 6f 6e 0a 20 20
descriptor 4: 00 00 00 fe 00 52 31 34 30 4e 57 46 35 20 52 48 20 0a
extensions: 00
checksum: fb
Manufacturer: IVO Model 57d Serial Number 0
Made week 0 of 2020
EDID version: 1.4
BUG=b:244208960
TEST=see firmware display using eDP panel in MT8188 EVB.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I67e0699c976c6f85e69d40d77154420c983b715e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68490
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are
required.
- For audio, it requires powering on adsp_ao_pwr_con,
adsp_infra_pwr_con and audio_pwr_con.
- Add new power domain data `ext_buck_iso_bits` for buck isolation
control.
BUG=b:244208960
TEST=access display registers successfully.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8188 supports eDP as internal display interface.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6441a36557b097e041bc081b907eb60b56c9fbe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add DDP (display data path) driver that supports overlay, read/write
DMA, etc. The output goes to display interface DP_INTF0 directly.
Add ddp gclast and output_clamp settings to MT8188 to support
multi-layer display.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Change-Id: Icc0a878c609818fedd298c141bb39469fd2f6388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68487
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPM register at offset 0x0 is often named as poweron_config_set in
previous MediaTek SoCs. To use common driver, we rename it from
poweron_config_en to poweron_config_set.
BUG=none
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct
member `input_mode` is added to `struct mtk_dpintf` for
differentiation. We also move SoC-specific data `dpintf_data` to soc
folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
DP drivers can be shared for both MT8195 and MT8188, so move them to
common folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I51ab987420e592ac2f841c2d7761c0adcc43124e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Always detecting the presence of the ELAN touchpad doesn't affect the
functionality, but allows dropping the override for all variants that
have multiple touchpad options.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id5d14eedd5d95dd0990ae56775daed9284c03717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This helps with deduplicating the identical parts of the variants'
devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie050c4624327b904e8cb0959b40421339e43f825
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6f5c10618edb87d2dc12c14187c4620d8675a443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Updating from commit id c45d2febb:
2022-10-12 15:56:24 +0200 - (Merge "fix(ufs): retry commands on unit attention" into integration)
to commit id 61fe7826d:
2022-10-18 16:20:05 +0200 - (Merge "feat(fvp): build delegated attestation in BL31" into integration)
This brings in 10 new commits:
61fe7826d Merge "feat(fvp): build delegated attestation in BL31" into integration
cf17f7c45 Merge "chore(rpi3): remove redundant code" into integration
70360382b Merge "docs(maintainers): add NPU driver owners" into integration
60c439435 docs(maintainers): add NPU driver owners
e504ce5fa Merge "fix(versal_net): Enable a78 errata workarounds" into integration
bcc6e4a02 fix(versal_net): Enable a78 errata workarounds
0271eddb0 feat(fvp): build delegated attestation in BL31
6047ab122 Merge "fix(versal): enable a72 erratum 859971 and 1319367" into integration
769446a68 fix(versal): enable a72 erratum 859971 and 1319367
2594759d2 chore(rpi3): remove redundant code
Change-Id: Ic32c0889961f529e1762b208ef118a94369c34e6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enable SSE2 (and SSE) when compiling for x86_64. Compilers often assume
SSE2 is present and enabled when targeting x86_64.
This fixes:
- lzma decompression code is compiled with the -Ofast flag
- 'everything' when compiling with clang.
This mostly affects qemu targets, which did not have this flag selected
yet.
TESTED on qemu.
Change-Id: I3cdc584c97016e15513df663a54a7bdb549a73e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44869
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
For some nissa variants, there are build configurations that need to use
different blobs, but otherwise are identical. Currently, they use the
same choice of board config and configure blob paths appropriately. This
avoids duplication within the Kconfig file, but the resulting firmware
images can be difficult to distinguish, since they report the same
FRID.
Add a prompt string for MAINBOARD_PART_NUMBER so it can be overridden
and round-tripped through make oldconfig, allowing customisation of the
reported FRID and other MAINBOARD_PART_NUMBER-derived values with
minimal overhead.
BUG=b:253966060
BRANCH=None
TEST=CL:3960290 MAINBOARD_PART_NUMBER configs apply successfully
Signed-off-by: Sam McNally <sammc@chromium.org>
Change-Id: I3497d7fa1c04c8fa2592025c771d9dbc65632e6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Parallel Port has LDN 1 and Serial Pot has LDN 2. Fix typo made in the
patch adding register definitions for NCT6687D Super I/O chip.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If850d2a0a03bd41e3d855f347fd182831bcfcdca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This is the enum value to initialize the Smart Trace Buffer's
Spill-to-DRAM feature. More information on how this is used is
available in the STB Linux kernel driver.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iab2e5fb121902959ddd0e7c8cca930a327b69291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Fix "bad revision" error when we run "update_submodules" with no option.
This adds "origin/trunk" branch name for "util/goswid".
Change-Id: Ie84d40fa00c6d0032b93917ad96e60120388eab5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
We've seen failures because the binaries were not being built into the
image. In particular, the APCB is modified by the coreboot build
process, so if the APCB isn't built correctly to support the correct
number of SPDs, the build can fail.
The mendocino FSP binaries are not yet pushed, so the build is currently
pointing at the cezanne binaries. The mendocino FSP will be pushed when
the mendocino chips are released for sale.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I31d11c5327416f4339930373c447531ae9f79d28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Update the MCA bank names for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If0082bd5362bdead3f9dc693d1e338e8cda224f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Pentium CPU will use 150W adaptor, this change revises PsysPL2 to 150W
based on fw_config.
BUG=b:253542746
TEST=Check CPU PsysPL2=150W in AP log with Pentium CPU.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I63b2a9d79454b20b60ba1317a8eebb3c10eff9d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
SaGv is enabled for all brya variants, so it should be harmless
to enable it for brask variants to save some power.
BUG=254374912
TEST=Build and boot to Chrome OS
Signed-off-by: Derek Huang <derekhuang@google.com>
Change-Id: Ib5d1e39b3f901606e2f1449e4ed40d53696562ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The touchscreen IRQ has been configured as LEVEL_LOW in skyrim projects.
Therefore, update the gpio.c to be consistent with the configuration.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Iccfe5b01f10899c43151762e4730a05990afa602
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id6363c92f8155007e05c682694d7413fd4630b6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Working with resources in KB is tedious and the base_k / size_k variable
naming was simply wrong in one case.
Change-Id: Ic5df054e714d06c9003752ed49dc704554e7b904
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68406
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TOLUD stands for top of lower usable dram. Memory between cbmem_top and
TOLUD, even if stolen for another device/purpose can still be marked WB
cacheable. This will result in a cleaner MTRR setup.
Change-Id: Ic3d6f589c60e44a3dce9122d206397cac968647f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68405
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add a config for FIVR in devicetree for both, mc_ehl1 and mc_ehl2
variants in order to provide the real delay value for the VCC supply
rail. This delay is needed to enable proper switching between different
VCC levels based on current system state.
Change-Id: Ibccb8ea1b42ccd2ff0a37cbd9651528a2a55ebd6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
the "x86 PIC code ebx" workaround done previously
by commit 689e31d18b0f ("Make cpuid functions usable
when compiled with PIC") does not work for x86_64
(the upper dword of rbx is set to 0)
the GCC bug that needed the workaround was fixed
in version 5 (see GCC bug 54232)
Change-Id: Iff1dd72c7423a3b385a000457bcd065cf7ed6b95
Signed-off-by: Matei Dibu <matdibu@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66345
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Apollo Lake seems to start with PCIe root ports unusable/uninitialized
before FspMemoryInit() is called and FSP-M properly initializes these
root ports.
However, we need the root ports accessible before FspMemoryInit() in
certain cases, such as emitting POST codes through a PCIe device.
For the initialization to happen properly, certain register writes
specified in Apollo Lake IAFW BIOS spec, vol. 2 (#559811), chapter
3.3.1 have to be done.
BUG=none
TEST=Boot on siemens/mc_apl2 with NC_FPGA_POST_CODE enabled and check
that the POST codes are emitted before FspMemoryInit().
Change-Id: If782bfdd5f499dd47c085a0a16b4b15832bc040e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68223
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the VCCST ICCMax Control for the ADL-N display flicker issue.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I10709ee8653563b397e8408e8e24ef8e656b02e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68252
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I692b86bba28853186185846f63dad1dcbfce1eea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia87fbbeb9ecb57ee2f4879404cbae5403de9bfc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add HBM3 according to SMBIOS 3.6.0:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
Change-Id: Id8473e8c4b5006b53b5ff9de7825d15595f2a616
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65356
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4fb845bb4145d47aea39d7e5493d854d00e289aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We still had a lingering reference to the old sabrina codename in the
vendorcode directory. Searching through the code now, the only places
the sabrina codename is seen is in the release notes, as is proper.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41762880b45a85ce7cd4210b8ce623076d874c06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Make GPIO_I2C_MASK macro more accurate by using the GPIO_I2Cx_SCL
definitions instead of BIT(x).
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I13fc376552068a64768fe1cf9f1c09cca1768aed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
On nissa, the pre-x86 time is not part of the 1s firmware boot time
target. Including the pre-x86 timestamps causes confusion since the boot
time appears to be greater than 1s, so disable the Kconfig on nissa.
We're not doing any analysis or optimisation of the pre-x86 time on
nissa anyway, this work will start from MTL onwards. Also, the Kconfig
is already disabled on the brya firmware branch, so this will result in
the same behaviour as brya.
Before:
Total Time: 1,205,840
After:
Total Time: 995,300
BUG=b:239769532
TEST=Boot nivviks, check "1st timestamp" is the first timestamp.
Change-Id: I885071c9e0ff9c8fac9444b382567d38a19c3c15
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68553
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I406f21c0c05e6af357e45e718422be94c6fd5408
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Not all kahlee variants use the RT5682 audio codec, so split the
baseboard audio ACPI into two parts and only include the asl for
the codec(s) actually needed for a given variant.
TEST=build/boot aleena, liara variants and verify no ACPI present
for RT5682 codec (which is not present on the boards).
Change-Id: Icb7df4f8e51495ad3cb40113cd00810fd27dcd00
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update generated FSP headers for Alder Lake N from v3301.00 to v3343.04.
Changes include:
- FspsUpd.h: 1. Add PchFivrVccstIccMaxControl UPD
BUG=b:254374913
BRANCH=None
TEST=Build using "emerge-nissa intel-adlnfsp" and boot Nissa.
Change-Id: I20b13d3dff2951e6ec3aa754c8954989a3b4e176
Signed-off-by: Shaik Shahina <shahina.shaik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68424
Reviewed-by: Reka Norman <rekanorman@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9755 support for frostflow
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I1db598c68687ed17fd9baa3567ab8fdd3e4fb6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Use the BIT() macro for single-bit constants.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I490f0093d55813260fcdb7303a94accfa90e75e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I726df4ff97688f4c48961e6e61672cef6c3b7aff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59ab9c2eaa65d974d418123e87e9afe65b1168cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Built from a mixture of autoport output, other variants, schematics and
expert guesswork. I don't have this board, but the code has been tested
by someone else and boots successfully (first try) with TianoCore. It's
reasonable to assume most things work, as this board is very similar to
the already-supported variants.
Change-Id: I3d8df483e5573f77782b7d18b1410b391bfe387d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61541
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|