summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-07google/kukui: Support sound in boot processJiaxin Yu
Configure and enable GPIO for speaker amp max98357a. BUG=b:117254418 TEST=Build pass and verified on kukui p1 board BRANCH=None Change-Id: I97655702dff402245326d2eff71fae0e336df9f5 Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-07intel/fsp1_1: Drop remnants of `pei_data`Nico Huber
`pei_data` was a struct with blob parameters from pre-FSP times. Somehow, it sneaked into upstream FSP1.1 support (probably because early board ports were written for a different blob). When added upstream, its usage was already perverted. It was declared at SoC level but mostly used to pass mainboard data from mainboard code to itself and FSP data from FSP code to itself. Now that no board/ SoC code uses it anymore, we can finally drop it. Change-Id: Ib0bc402703188539cf2254bdc395cca9dd32d863 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07mb/purism/librem_skl: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were never consumed anywhere again. So just merge the used code into `romstage.c` where it's effectively used. Change-Id: I499b3cfcdd5400ea132749555d433a2d8a9471a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07mb/google/glados: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were later only consumed by the mainboard code again. Avoid jumping through this hoop and fill FSP UPDs directly. Change-Id: I040f4a55b4f4bad3f6072920e5e2eceded4cb9bb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07mb/google/cyan: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were later only consumed by the mainboard code again. Avoid jumping through this hoop and fill FSP UPDs directly. The provided solution locates the SPD data in CBFS again to fill SMBIOS tables. This is not perfect. OTOH, this code isn't mainboard specific and doesn't belong here anyway. Change-Id: Ib6103d5b9550846fe17c926631a013ff80b9598f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07soc/intel/bsw: Move memory init values into `romstage.h`Nico Huber
`chip.h` is usually used as devicetree interface. Change-Id: Ied30927d68927b86758a84ccf3f5fbd8cce632f1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32592 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07mb/intel/saddlebrook: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were later only consumed by the mainboard code again. Avoid jumping through this hoop and fill FSP UPDs directly. Change-Id: I399dd89f85ccea43fdf90bd895e71324f4b409cc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07mb/intel/kunimitsu: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were later only consumed by the mainboard code again. Avoid jumping through this hoop and fill FSP UPDs directly. Change-Id: Ibc013ccea9f83ef29f22fe2da4c0d12096308636 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07intel/fsp1_1: Move MRC cache pointers into `romstage_params`Nico Huber
These are part of a common concept and not SoC specific. Change-Id: I9cb218d7825bd06a138f7f5d9e2b68e86077a3ec Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-05-07Revert "Makefile.inc: Enable -Wtype-limits"Patrick Georgi
This reverts commit c4ab50cdde4bfd01ec7509012b105c88bcf4c953. Reason for revert: vboot recently was changed so that -Wtype-limits fails, and that was just brought upstream. Since vboot internals are more likely to be used elsewhere while -Wtype-limits is less critical, revert this until vboot is resolved, then bring -Wtype-limits back again. Change-Id: I9cce10462b9e57189513fa49e11fd27ebe35ba51 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32670 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07intel/fsp1_1: Drop `boot_mode` from `pei_data`Nico Huber
It was only used locally. Change-Id: Iaaad760e8ceca62655f5448c30846cf11959e8e1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-05-07intel/fsp1_1: Drop unused, weak raminit()Nico Huber
Change-Id: I5d155df1d589fc8d7462f46e87275bd6efae0a7f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-05-07mb/lenovo/x60: Use system_reset()Elyes HAOUAS
Change-Id: I4515d8d14629741f3bf49e9459d7d57c18d321ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-07{gm45,pineview,sandybridge,x4x}: Use {full,system}_reset() functionElyes HAOUAS
Use already defined system_reset() and full_reset() functions. Change-Id: Ic29fab70cf7f23d49c3eeeb97c984c523f973972 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-07mb/apple/macbookair4_2: Correct internal video port selectionEvgeny Zinoviev
The MacBook Air 4,2 uses eDP, according to the schematics. Change-Id: Ifc98eab343fd89b8512e92e01fddf34ef8447d5f Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32606 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07Update vboot submodule to upstream masterJoel Kitching
Updating from commit id 304aa429: 2019-03-12 10:38:56 -0700 - (futility: updater: Unit test for preserving sections using FMAP flags) to commit id e7edff66: 2019-05-03 07:02:32 -0700 - (vboot: implement DISPLAY_INIT context and SD flag) This brings in 45 new commits. Change-Id: I7493e43bddc553f9724de46130ccb4cb44e18573 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-06mb/google/sarien: Turn off camera power when s0ixEric Lai
Turn off camera power when s0ix for power saving. BUG=b:129177593 TEST= measure camera power comsumption is 0mV under s0ix Change-Id: I5a9b7ec1e95cc9931d8d5f2dc1254805c9d0ffed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-06mb/google/sarien: Fine tune SD card D3 cold timingEric Lai
A13 and A15 need to set low before H12 reset. Change the program sequence for fit HW requirement. BUG=b:131876963 TEST=boot up and check SD card functional Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I2f1752070f24833aaaab75dea8493caf2ed7f157 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-06vboot: remove use of GoogleBinaryBlockHeaderJoel Kitching
Remove use of deprecated GoogleBinaryBlockHeader struct, and replace with vb2_gbb_header. BUG=b:124141368, chromium:954774 TEST=make clean && make test-abuild BRANCH=none Change-Id: Iee3bd877cb1791a689efdeabda324f43f7d0c6f2 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-06src: Remove unused include <halt.h>Elyes HAOUAS
Change-Id: I2f142cc80692e60eb0f81f57339a247f6ef4a524 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-06inteltool: Add Sunrise Point-LP Skylake PCH IDsFelix Singer
Sunrise Point-LP is used on Skylake and KabyLake platforms, but the PCH IDs differ. This commit adds the PCH IDs for Skylake mobile platforms and renames the Kabylake macros to distinguish them. Used Intel documents: - 332995-001EN (I/O datasheet vol. 1) - 332996-002EN (I/O datasheet vol. 2) Change-Id: Id46224fcc44b06c91cbcd6c74a55c95e1de65ec6 Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06Documentation: Add MSI MS-7707Bluemax
Change-Id: Iba38bda9becba9fcffb51afc4756023659f092ef Signed-off-by: Max Blau <tripleshiftone@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06arch/x86: Remove unused filePatrick Rudolph
The file is no longer used by any code. Remove it. Change-Id: I73f06cac11201dc37218d352ab995cf4f012c36a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-06drivers/intel/fsp2_0: Fix fsp post-init validationMatthew Garrett
Part of this checks whether tolum_base and cbmem_top are the same - however, cbmem_top hasn't been initialised at the point where this call occurs. Change the ordering to fix that. Signed-off-by: Matthew Garrett <mjg59@google.com> Change-Id: Ib89e0513bdc35c3751a9d4c2a2789a2836046789 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-06soc/intel/apollolake: Reset GPI IS & IE registers at ramstageKarthikeyan Ramasubramanian
Reset GPI Interrupt status and enable registers from ramstage instead of bootblock so that it applies to devices in field. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ib11b580ceb23bd1fe789f549b667a8ced2d859a1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32534 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/intel/cannonlake/acpi: Add board level s0ix call backEric Lai
Add board level s0ix call back. Since some driver doesn't care _ON/_OFF method. Add a control method for s0ix usage. BUG=b:129177593 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I404f388b19355ae89b36d1fb07f9fb4f97eb3b2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/32539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-06soc/apollolake: Add ramstage hookFelix Singer
A hook for romstage is already existing but not for ramstage. It's very useful for debugging as it allows to run code for testing purposes by the mainboard. Also, it allows to run configuration code or configure FSP options, which don't have a devicetree option. Change-Id: I9edc543943c5cbc696fc6c615cb77ef68294c980 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06soc/amd/stoneyridge: Correct bugs in lpc.cMarshall Dawson
Remove the bridge enable step of accessing D14F0x64. This method for enabling the bridge appears to be last present in the SB700 device. Beginning in the SB800 (and all FCH, SoC devices), the enable is in PMxEC[0]. Since the bridge is enabled in bootblock to allow port 80h, there is no need to maintain it in ramstage. Correct the device used for misc. configuration of the LPC bridge. The #defined value removed is 14.0 but the settings are in 14.3. TEST=Boot Grunt, check console and dmesg for errors and warnings BUG=b:131862871 Change-Id: I078be974dc3c78c94cb7c0832518f21bac029ff2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-05-06soc/amd/stoneyridge: Move acpi_fill_mcfg to northbridgeMarshall Dawson
Relocate the function to the more appropriate file. Change-Id: I92a3e8d0461ae228f6c01567db159e2458de5f6b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-06Makefile.inc: Enable -Wtype-limitsJulius Werner
This patch enables -Wtype-limits for the whole repository, which disallows checking for a condition that must be always true or always false based on type width (e.g. checking whether an unsigned variable is negative or whether a 32-bit integer is larger than 4G). This helps avoid easy to make and hard to find (because they often only affect error paths) mistakes like size_t size = fmap_read_area(...); if (size < 0) die("If only the compiler could've told me to use ssize_t instead"); Change-Id: I19edabfd092d09dad720e3fc47b44838163bfe25 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32536 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06Fix code that would trip -Wtype-limitsJulius Werner
This patch fixes up all code that would throw a -Wtype-limits warning. This sometimes involves eliminating unnecessary checks, adding a few odd but harmless casts or just pragma'ing out the warning for a whole file -- I tried to find the path of least resistance. I think the overall benefit of the warning outweighs the occasional weirdness. Change-Id: Iacd37eb1fad388d9db7267ceccb03e6dcf1ad0d2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32537 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06spd_bin: Do not depend CONFIG_DIMM_MAX on CONFIG_GENERIC_SPD_BINJulius Werner
I can't claim that I really understand what this code does, but it looks like there are platforms that use code from lib/spd_bin.c without enabling CONFIG_GENERIC_SPD_BIN. Some functions in that file contain references to CONFIG_DIMM_MAX, so that option probably shouldn't depend on CONFIG_GENERIC_SPD_BIN. Change-Id: I041c52b6bd255e9a9920e5a101165ba5fc5fa6f3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32548 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06purism/librem_skl: remove 13v3 target, clean up KconfigMatt DeVillier
Remove the Librem 13v3 as a separate board; instead build a single firmware image for the 13 v2/v3 boards. Clean up Kconfig options: - remove entries for 13v3 board - fold entries into a single line where possible - remove redundant MAINBOARD_VERSION option (will default to 1.0) - remove unused microcode length/location (only needed for FSP CAR) Test: build/boot Librem 13 v2/v3 boards with same image Change-Id: Ic09b8ec5c576f4c4c48ef30ee3f60a4c2c286cd3 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-06mb/google: Remove unused 'include <smbios.h>'Elyes HAOUAS
Change-Id: Ib96c317391745fa5afea785e3c7441124b3fc252 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-06sb/amd/rs780: Use 32 bit variable to avoid truncationJacob Garber
The {read,write}_index functions expect a 32 bit value, as do the bitwise operations. Found-by: Coverity Scan #1229584 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Idc2bc46c899d5a4e8b089644dca076a88d97dd7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/32528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-06soc/intel/braswell/Makefile.inc: Remove commented-out lineFrans Hendriks
cpu_microcode_bins is commented out. Remove this line. BUG=NA TEST=Portwell PQ7-M107 Change-Id: Ic398d232bea84a765fce940ef876916a873e561f Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32510 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/skylake: Add missing PCH IDsMarius Genheimer
Added IDs for: - H170 - Z170 - Q170 - Q150 - B150 Used documents: - 332690-005EN Tested on Gigabyte GA-Z170N-WIFI Change-Id: If20a2b764afa02785a97948893dbc5b5f60aff60 Signed-off-by: Marius Genheimer <mail@f0wl.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32517 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06sb/intel/bd82x6x: Use common/rcba.hPatrick Rudolph
Make use of: * southbridge/intel/common/rcba.h * southbridge/intel/common/pmbase.c * defines in pch.h Get rid of dependency to DEFAULT_RCBA. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: I879fce6a5bb80499e1986e618a1422a7aaa3a0c0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32066 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06google/kukui: Raise the CPU frequencyTristan Shieh
Run CPU at the highest freqency (1989MHz) to speed up the boot time. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I703ffcb99367f87e6792a72485f5634e0505e5ac Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32466 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06mediatek/mt8183: Wait 200us for voltages to settleTristan Shieh
When we increase voltages, it takes 200us for voltages to stablize. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I5f32035693b6084dbe763411c612ae5d1f7c9e48 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-06mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.Tim Wawrzynczak
Updated GPP_A8 to be a GPI and SCI source, to support both wake and notifications. BUG=b:128941098 BRANCH=none TEST=Compiles, simulated pen eject with PCH_INT_L signal. Both evtest and waking from s0ix confirm this works. The output of /proc/interrupts confirms the correct interrupt is triggered. Change-Id: I080fb3cbfb3e2f55209ca31824b00ca820d70f78 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-06soc/intel/cannonlake: Add GPIO dual-route support.Tim Wawrzynczak
Select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT in Kconfig BUG=none BRANCH=none TEST=compiles Change-Id: If5f59ea50c13bd1f279637e281468e6d0312dbab Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32486 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/intel/common: Add new PAD_CFG macro.Tim Wawrzynczak
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be configured as GPI, GPIO Driver mode, and SCI interrupt. Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by PAD_CFG_GPI_IRQ_WAKE). BUG=none BRANCH=none TEST=Compiles Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06drivers/intel/fsp1_1/cache_as_ram.inc: Reduce max line length to 80Frans Hendriks
Cosmetic change to reduce line length to 80 max. BUG=NA TEST=Build Portwell PQ7-M107 Change-Id: Ib537592c0a6a3fffc85622e6b74ad5ec8041e7dc Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06soc/amd/common: Introduce module_dispatch()Kyösti Mälkki
This change removes all the separate entrypoint dispatch functions as they all share the same pattern. Furthermore, none of the function definitions under vendorcode binaryPI/AGESA.c file have proper declarations, the ones compiler picks up from AGESA.h are for the internal implementations and with sanely organized headerfiles would not be exposed outside the build of AGESA at all. Change-Id: I0b72badc007565740c93b58743cfd048e8b42775 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31485 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06mainboard/intel/strago/acpi: Serialize _CRS methodFrans Hendriks
IASL reports warning 'Control Method should be made Serialized'. Change _CRS method to Serialized. BUG=N/A TEST=Build Intel Strago Change-Id: I63a7e1caab19360a9a5831458311d5a83fdf52d1 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06mb/siemens/mc_apl2: Limit SD-Card speed to DDR50Werner Zeh
Due to PCB limitations the SD-Card interface is not able to operate with the highest frequency reliably. The OS driver will switch to the highest mode if a SD-Card is attached which supports this high frequency mode. In order to work around this PCB limitation disable the high frequency modes in the controller capabilities (SDR104 and HS400 mode) and leave SDR50 and DDR50 enabled. Change-Id: Ia5fed5fb70b027de34170b49620927614a00fb7a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-05mb/msi/ms7707: Remove MAINBOARD_PCI_SUBSYSTEM_{DEVICE_ID,VENDOR_ID}Elyes HAOUAS
References to MAINBOARD_PCI_SUBSYSTEM_{DEVICE_ID,VENDOR_ID} were removed. Change-Id: I70ef22aac165a19663749f76449907482b761316 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-04src/Kconfig: remove duplicate entry for drivers/fsp1_0/KconfigMatt DeVillier
The entry for drivers/intel/fsp1_0/Kconfig was added under the chipset menu before addtional FSP versions were added, and the drivers/*/*/Kconfig entry added to support them. This results in the fsp1_0 Kconfig items being duplicated in the Chipset and Generic Drivers menus. Remove the chipset entry since it's no longer needed. Test: select FSP 1.0 mainboard (e.g. intel/minnowmax) in menuconfig, observe FSP 1.0 Kconfig entries listed only under Generic Drivers menu. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: If1e78fb9259b1a46d308db829881eb3b3d17cf40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32565 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-03{soc, southbridge} : Correct typo in commentFrans Hendriks
BUG=N/A TEST=N/A Change-Id: I1b207e0b77bac8860ba7501378297c1f3604141c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32453 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-03mainboard/google/cyan/acpi: Serialize _CRS methodFrans Hendriks
IASL reports warning 'Control Method should be made Serialized'. Change _CRS method to Serialized. BUG=N/A TEST=Build Google Banon and Google Cyan Change-Id: Iffa097a2100cfa91efa3b617311500b83f839bce Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-03sdm845: Add QCLib to RomStage to perform IP initT Michael Turney
CB acts as I/O handler for QCLib (e.g. DDR training data) This interface allows bi-directional data flow between CB and QCLib Tested and working interfaces: DDR Training data QCLib serial console output DDR Information (base & size) limits cfg data TEST=build & run Change-Id: I073186674a1a593547d1ee1d15c7cd4fd8ad5bc1 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-03sdm845: Combine BB with QC-Sec for ROM bootT Michael Turney
TEST=build & run Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-03drivers/fsp 1.1: clean up Kconfig optionsMatt DeVillier
Now that support has been added for using the public FSP repo for Braswell platform, clean up Kconfig options and set sane defaults when using it. The following changes have been made: - add option to use the 3rdparty/fsp repo for Braswell platform - reorder FSP 1.1 Kconfig entries for improved flow/readability - set the default path for the FSP binary based on use of FSP repo and platform - set the CBFS location for the FSP binary based on platform Change-Id: Ie2f732bf0ac4d4551908caa56360b8bb2869b4c7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-03soc/intel/braswell: add default option to use public FSPMatt DeVillier
The current Braswell FSP 1.1 header in vendorcode/intel, for which there is no publicly available FSP binary, contains silicon init UPDs which are not found in the publicly available header/binary in the FSP Github repo. This prevents new boards from being added which use the public Braswell FSP header/binary. To resolve this, move the UPDs not found in the public header from the soc's chip.c to ramstage.c for the boards which use them. Add a Kconfig option to use the current non-public FSP header and select it for boards which need it (google/cyan variants); set the public FSP option as the default. Use the Kconfig option to set FSP_HEADER_PATH to ensure the correct header is used. Test: build google/cyan and intel/strago using non-public and public FSP header/binaries respectively. Change-Id: I43cf18b98c844175a87b61fdbe4b0b24484e5702 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-03Makefile.inc: Update fsp submodule for all FSP platformsMatt DeVillier
Rather than selectively update the fsp submodule based on FSP version or platform selection, update it when building for any FSP-enabled platform, so all have latest version available. Change-Id: If07d55828a1863623e04a4ecdd1514c3cb6d9c11 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-03mb/google/arcada: Add settings for noise mitgationNathan_chen
Enable acoustic noise mitgation for arcada platform, the slow slew rates for Ia and Gt are fast time dived by 8. BUG=b:131144464 TEST=waveform test and hardware validation result pass. Signed-off-by: nathan chen <nathan_chen@wistron.corp-partner.google.com> Change-Id: I395b2fc527705ab207325cfd7147e6af5f300fce Reviewed-on: https://review.coreboot.org/c/coreboot/+/32521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-03mb/google/poppy/variant/atlas: enable USB acpiGaggery Tsai
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. BUG=b:122540489 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage $cat sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dat & retrieve ssdt.dat from DUT & $iasl -d ./ssdt.dat & check the HS03 node is with "reset-gpio" under _DSD object Change-Id: I411ef707782655361bd1b8ac2b914b8ae64defeb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Caveh Jalali <caveh@google.com>
2019-05-03nb/intel/haswell: correct a typo in KconfigJoel Kitching
Change-Id: I115e065ce11946b85571e7233203be68c1789d70 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-02sdm845: Add USB support on cheza platformChandana Kishori Chiluveru
This patch adds code to initialize two USB DWC3.0 controllers and its associated QUSB V2 10nm PHYs to the SDM845 SOC, and uses them to initialize USB3.0 on the cheza mainboard. Synopsis controller initialization and configuration sequences taken from USB 3.0 HPG chapter 2.2 and refer PHY HPG chapter 10.2 for QUSB phy programming. Includes Super speed mode support. TEST=USB keypad and mass-storage device enumeration tested with this patch Change-Id: I475a7757239acb8ef22a4d61afd59b304a7f0acc Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02qualcomm: Add QCLib interface support to common/T Michael Turney
Change-Id: I38d086c379a3c2f54d1603a2fed5b33860f7f4d7 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02sdm845: Select VBOOT_MIGRATE_WORKING_DATA, now requiredT Michael Turney
Change-Id: Idebbbd89de05d949e6f953aa49d8662d64383d1a Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02mainboard/intel/icelake_rvp: Add support to read board ID from ECSubrata Banik
This patch selects EC_ACPI kconfig to identify Intel Ice Lake RVP board by querying EC. Change-Id: I0082e04ef1b21d533e40d232209ee630f748aec6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-05-02soc/intel/icelake: Correct the GPE DWx mapping for GPIO groupsSubrata Banik
This implementation corrects the GPE DWx mapping for GPIO groups. The assignments is done in GPIO MISCFG register for all GPIO communities. And configures the which GPIO communities get register as Tier1. Change-Id: I9c306d46e5194944def26c24cdb95f5ebada42b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-05-02soc/intel/icelake: Select FSP_M_XIPSubrata Banik
This patch ports CB:32275 changes from CNL to ICL. Ice Lake require that FSP-M component should be XIP. This change selects FSP_M_XIP so that the right arguments are passed into cbfstool when adding this component. Change-Id: Icc5550f1f94957fa1b28c8bba6fc0efee98e233e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32507 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/icelake: Move power_state functions to pmutil.cSubrata Banik
This patch ports CB:31787 and CB:31908 changes from CNL to ICL. This change moves soc_fill_power_state and soc_prev_sleep_state to pmutil.c. It allows the functions to be used across romstage and smm. Also fix GEN_PMCON bit checks as below: ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A and so this change updates the check for these bits to use GEN_PMCON_A instead of GEN_PMCON_B. Change-Id: Ib7ab95b7bbcc97a076d27a11db2105f7b976b521 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32506 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/{broadwell, skylake}: Remove unused pch_log_state() declarationSubrata Banik
This patch removes unused pch_log_state() function declaration from pch.h because elog.c has static implementation of pch_log_state(). Change-Id: Ib0f3831dc3b60af2ee432a76866e401a51b96fb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32505 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/icelake: Add chipset event loggingSubrata Banik
This patch ports CB:30718 and CB:31908 changes from CNL to ICL. Add logging of chipset events on boot into the flash event log. This was tested on a google/dragonegg board to ensure that events like "System Reset" are added to the log as expected. Also fix GEN_PMCON bit checks as below: ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A and so this change updates the check for these bits to use GEN_PMCON_A instead of GEN_PMCON_B. Change-Id: I25ec32e81f8801f8d5e69c6095ffed73d75dded6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-05-02soc/intel/icelake: Clear PMCON status bitsSubrata Banik
This patch ports CB:31902 changes from CNL to ICL. The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. Change-Id: Ia07aa17b4491216a277c36edfe6ed2aa489287c6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32503 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02x86emu: add console.h header to fix compilationMartin Kepplinger
Commit 351e3e5 ("src: Use include <console/console.h> when appropriate") has broken the build here, see below, so we include console.h here again. In file included from src/device/oprom/x86emu/x86emui.h:65, from src/device/oprom/x86emu/debug.c:40: src/device/oprom/x86emu/debug.c: In function 'x86emu_dump_regs': src/device/oprom/x86emu/debug.h:46:22: error: implicit declaration of function 'printk'; did you mean 'printf'? [-Werror=implicit-function-declaration] #define printf(x...) printk(BIOS_DEBUG, x) ^~~~~~ src/device/oprom/x86emu/debug.c:366:5: note: in expansion of macro 'printf' printf("\tAX=%04x ", M.x86.R_AX ); ^~~~~~ Fixes: 351e3e5 ("src: Use include <console/console.h> when appropriate") Change-Id: I75d0b7c08bfa6dcb07778bbb762223b62cfc3da7 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-05-01mb/google/sarien: Disable S5 wake on LAN by defaultEric Lai
Chromebook doesn't require support wake on LAN in S5. Disable it by default for power saving. BUG=b:131571666 TEST= check LAN indicator is off under S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia90c9d2f3ea9b3580e9a7bbfb47c917dd51e3c03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-01google/cyan,intel/strago: increase default CBFS sizeMatt DeVillier
a 1M CBFS size is inadequate when adding the FSP binary to image due to default FSP location in CBFS, so bump to 2M to ensure autobuilds succeed. Change-Id: I0683bea43cc71fad32bc42bfbd72f3913256d53c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-01arch/x86/acpi: Update VT-d DMA remapping structure flags settingJohn Zhao
DMA remapping structure flags settings are Bit 0: INTR_REMAP, Bit 1: X2APIC_OPT_OUT, Bit 2: DMA_CTRL_PLATFORM_OPT_IN_FLAG, Bits 3-7: Reserved (0). BUG=b:130351429 TEST=Image built and kernel booted to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Iaf4764a9062756cadc335d1932b0da8628797f5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32516 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-01soc/intel/common: Set RX_DISABLE for pads configured as NCFurquan Shaikh
For GPIO pads that are configured as no-connect (PAD_NC), setting it as GPI (with Rx enabled) leads to GPE0_STS being set incorrectly. Though this is not an issue in practice (GPE0_EN is not set, so no events triggered), it can confuse users when debugging GPE related issues. This change configures PAD_NC to have Rx disabled along with Tx to ensure that it does not end up setting GPE0_STS bits for unwanted GPIO pads. P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that configuration as is. BUG=b:129235068 TEST=Verified that GPE0_STS bits are not set for pads that are marked as PAD_NC. Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2019-05-01mainboard: Add MSI MS-7707Max Blau
* MSI MS-7707 V1.1 (Medion OEM Akoya P4385D MSN10014555) * SandyBridge Intel P67 (BD82x6x) * Winbond 25Q32BV (4MB) * Fintek F71808A * Intel 82579V Gigabit * NEC uPD720200 USB 3.0 Host Controller * IME 7.0.4.1197 Working: * PCIe gfx adapter * PS/2 Keyboard * USB3.0 * Ethernet * S0/S3/S5 * HWM Change-Id: I999149bb95d553ed217b2288cc34bce4fe88abb3 Signed-off-by: Max Blau <tripleshiftone@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-01superio/fintek/f71808a: Add more optional ramstage registersMax Blau
Add more registers and make them optional, so they keep untouched/ their default if omitted. Change-Id: I5d8008176d2972976b387c558658b8e70b50af8e Signed-off-by: Max Blau <tripleshiftone@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-04-30rockchip: rk3399: increase memory for fit payload.Marty E. Plummer
Increase ramstage to 2M, required to actually embed the 7.2mb uImage into the coreboot.rom, increase the postram cbfs cache in order for the fit image to be loadable (without this increase the fit payload is found but not loaded) Change-Id: Iee0ed9f7958588ceda54bb32253c84cac68abea2 Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-30vboot: refactor OPROM codeJoel Kitching
The name OPROM is somewhat inaccurate, since other steps to bring up display and graphics are needed depending on mainboard/SoC. This patch cleans up OPROM code nomenclature, and works towards the goal of deprecating vboot1: * Rename CONFIG_VBOOT_OPROM_MATTERS to CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig description * Remove function vboot_handoff_skip_display_init * Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY * Add |flags| field to vboot_working_data struct * Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild TEST=build and flash eve device; attempt loading dev/rec modes BRANCH=none Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-30mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INTNaveen Manohar
Patch corrects IRQ and GPIO configuration for RT5682 codec's Jack INT. Switching IOAPIC to GpioInt because ACPI Interrupt() doesn't support jack triggering on both edges. BUG=b:130180492 TEST=build and boot on a CML EVT board. Use evtest & verify headset jack detection functions as expected. Change-Id: Ia9bf8d554b54554f9ac1e78fd44a508964c8a14d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Suggested-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32474 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-30Documentation: Add FITPatrick Rudolph
Describe the Firmware Interface Table and reference useful documentation. Change-Id: I00abc1fd13be7b48d56ba8cb65d2542ed07f9017 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-04-29sb/intel/bd82x6x: Use system_reset()Elyes HAOUAS
Use already defined system_reset() function. Change-Id: I6e5aff96e06830931acf700593d3e1689857efdc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-29ich7/i945: Use system_reset()Elyes HAOUAS
Use already defined system_reset() function. Change-Id: Ieff4271c4a09d564d5f3415d8bc2c3843c8460f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-29src/mb: Use system_reset()Elyes HAOUAS
Use already defined system_reset() function. Change-Id: I68ff4cffa2bfab6a15299795c3e1837fc9b85806 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-29nb/intel/pineview: Use system_reset()Elyes HAOUAS
Use already defined system_reset() function. Change-Id: I32c731de0c30940d15fd01fec6f10b3b33c04370 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-29nb/intel/nehalem: Use system_reset() and full_reset()Elyes HAOUAS
Use already defined system_reset() and full_reset() functions. Change-Id: Ib7e399b5186aa704d0388c4a4b18480f2e3799f3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-29nb/intel/haswell: Use system_reset()Elyes HAOUAS
Use already defined system_reset() function. Change-Id: I436f62c4402736fb74c59d8b359d0b3963f0e659 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-29nb/x4x: Use system_reset() and full_reset()Elyes HAOUAS
Use already defined system_reset() and full_reset() functions. Change-Id: I0a05f3ac5c5340a509024de2b444960f498c3e99 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-29rockchip/rk3399: Select VBOOT_MIGRATE_WORKING_DATAJulius Werner
Trusted Firmware places some components in SRAM on RK3399 and therefore restricts accesses to SRAM to the secure world. This makes the vboot working data inaccessible to normal world payloads, so we need to migrate it into CBMEM. Change-Id: Ic7c95790f2f118ccbdd897550f13b5f987bdd831 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-04-29mediatek: Add function to raise the CPU frequencyTristan Shieh
Implement mt_pll_raise_ca53_freq() in MT8183 to raise the CPU frequency. Move the function declaration to common header. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: Ide8d767486d68177fa2bfbcc5b559879eca1bcda Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29mediatek/mt8183: Set CPU frequency to 1417MHzTristan Shieh
With the default CPU voltage (0.8v), CPU frequency should be 1417Mhz at most. We have to raise CPU frequency to 1989MHz after increasing CPU voltage to 1.05v in romstage. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I4c3e0fa27ccda8e0efe422b6ab503a1efb1697e9 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29vboot: specify NEED_VB20_INTERNALS when neededJoel Kitching
NEED_VB20_INTERNALS should always be specified when peeking into vboot internal data structures. BUG=b:124141368, chromium:956474 TEST=make clean && make test-abuild BRANCH=none Change-Id: I5a47a28350fd5a68efeff0d06ca150c1ae145412 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29mb/google/sarien: Update GBB flagsDuncan Laurie
Disable the GBB flag forcing manual recovery now that we can read the manual recovery from H1. Enable the GBB flag to skip EC software sync, since images built from coreboot.org do not include the EC binaries by default. Change-Id: I0e1d6304e3e29eda68c7b807cf0774275c37d710 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29Revert "soc/intel/common/block: add VMX support"Nico Huber
This reverts commit 9aae51ad1141a47d5c2f7133b02f5f0ab6168860. Proper code in cpu/intel/common/ shall be used instead. Change-Id: I4a5d558b03497d106083eece10c5b34e0e7cbb2d Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29683 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29arcada: add internal pull to ISH UART RXJett Rink
We do not want the RX signal to be floating on the board as that could cause the ISH to remain in a higher power state (because there is logic to keep the ISH in an higher power state when there is an active UART). Add an internal 20K pull up on the RX line. In normal configuration this will burn an additional 544uW. BRANCH=R75 BUG=b:131241969 TEST=verify that ISH console still works with rework Change-Id: Ifc9621bcafe4c86edfa9cd6d58b307254d3a81ca Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-29soc/skl: set IGD resources only if device is enabledMaxim Polyakov
If the Intel IGD device pci 02.0 is disabled or undefined in the device tree, then internal graphics pre-allocated memory and GFX-VT MMIO memory for virtualization won`t be allocated in the SoC address space. Thus, patch resolves the FSP-S hang problem on Skylake/ Kaby Lake processors when the IGD device is disabled. This should provide to run FSP 2.0-based coreboot on these CPUs families without integrated graphics card. The following boards were used for testing: - Asrock H110M-DVS board (desktop i5-6600) & NVIDIA GTX 1060 as external GPU. Virtualization and GFX 3D acceleration with nouveau driver still works well (tested on VirtualBox 5.1.38 with Ubuntu 18.04.1 as guest and host OS) - Intel KBL-R U RVP board (mobile i5-8350u) without GFX. Payload: tianocore edk2-stable201811-216-g51be9d0. Change-Id: Id7a0cba582d83e3fe7e8d20342ee219cdd369a53 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32467 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mediatek/mt8183: Init audio related clockJiaxin Yu
Enable audio clock, intbus clock, infra clock and mtkaif 26m clock.Needed by audio playback in firmware. BUG=b:117254418 BRANCH=none TEST=Build pass and verified on kukui p1 board Change-Id: I88060d9796cc23ad7f524943f36869e1ec85073d Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-29mb/google/sarien: Add psys_pmax setting to 136WGaggery Tsai
This patch adds the setting of psys_pmax to 136W. According to the design, Rpsys is 11.8Kohm. Here is the equation to come out the Psys_pmax value: Psys_pmax * 1.493uA/W * 11.8Kohm / 2 = 1.2V Hence, Psys_pmax is 136W. BUG=b:124792558 BRANCH=None TEST=emerge-sarien coreboot chromeos-bootimage & Ensure the value is passed to FSP by enabling FSP log & Boot into the OS Change-Id: Id3f6be5f0c2346a7763195a992c0ae45faede056 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-04-29soc/intel/apollolake/bootblock: Clear the GPI IS & IE registersKarthikeyan Ramasubramanian
Clear the GPI Interrupt Status & Enable registers to prevent any interrupt storms due to GPI. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ia3b9d3bf08472219348e20b53bae470c589039fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel/common: Add support to clear GPI IS & IE registersKarthikeyan Ramasubramanian
Add support to reset the GPI Interrupt Status & Enable registers so that the system does not experience any interrupt storm from a GPI when it comes out of one of the sleep states. BUG=b:130593883 BRANCH=None TEST=Ensure that the Interrupt status & enable registers are reset during the boot up. Ensure that the system boots fine to ChromeOS. Change-Id: I99f36d88cbab8bb75f12ab1a4d06437f837841cb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel: Add GPI interrupt config register offset infoKarthikeyan Ramasubramanian
Add the offset information for GPI interrupt status and enable register in the pad_community structure. Populate the concerned information for individual SoCs. This offset information is required to clear the interrupt configuration during the bootup. BUG=b:130593883 BRANCH=None TEST=Ensure that the interrupt configuration are cleared during bootup. Ensured that the system boots to ChromeOS. Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 07:14:22 +0000