| Age | Commit message (Collapse) | Author |
|---|
|
Do this to wipe error message and hexdump of SPD from console log.
Change-Id: I45ffcb1c80aecf43b79d93faedcd62c8f0023cb7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/11900
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Value of tRFCmin was incorrectly using 2 Gigabit chip data.
There was no observed instability or bug reports because of this.
Change-Id: Ifa03b883afa5a304dd20caf3d4d0383c6cfebdb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/11899
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3a42ba9494b5174920e36e3110b8d62d721fe742
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11886
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ia158b4c6c12fb6e22ea7fed9035574a3abedf98c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11885
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR,
we also remove the _MSR suffix, as they are, by definition, MSRs.
Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11761
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This chip is still being used and should not have been deleted. It's
a current intel chip, and doesn't even require an ME binary.
This reverts commit 959478a763c16688d43752adbae2c76e7764da45.
Change-Id: I78594871f87af6e882a245077b59727e15f8021a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11860
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The existing microcode update system used custom, manually generated microcode
blob files. This made updates very difficult. Update parser to use stock
microcode update files as provided by AMD.
Change-Id: I772b264ad167f2a5d629dab5d64d9b0ccab3a053
Signed-off-by: Audrey Pearson <apearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11829
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Updating to a new IASL introduces a lot of warnings that are
not serious issues but can be fixed with some reworks.
- Method local variables that are set but never used now warn,
when needing to read back a register the ordering is now changed
to set the value in Local0 first so the compiler does not complain.
- Methods that create an object must be serialized
- A ResourceTemplate declared inside a _CRS with a named variable
does not seem to be able to compile without a warning. To fix
this move the ResourceTemplate outside the _CRS method.
- The DPTF CPU code was still using the old legacy \_PR.CPUx
instead of the new \_PR.CPxx definitions.
BUG=chrome-os-partner:44622
BRANCH=none
TEST=build glados with iasl-20150717 and see no warnings
Original-Change-Id: I4a66c7eb6495aac4ae1aa42100c846725c1a04d2
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302168
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia3af802ca2faab4f1c59e73f2ce31a65c7e862e0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11812
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
In order to support verstage the cache-as-ram split
is taken advantage of such that verstage has the
cache-as-ram setup and rosmtage has the cache-as-ram
tear down path. The verstage proper just initializes
the console and attempts to run romstage which triggers
the vboot verification of the firmware. In order to
pass the current FSP to use during romstage a global
variable in cache-as-ram is populated before returning
to the assembly code which tears down cache-as-ram.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados with verstage support as well as
VBOOT_DYNAMIC_WORK_BUFFER with direct link in romstage.
Change-Id: I8de74a41387ac914b03c9da67fd80f8b91e9e7ca
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11824
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
To support x86 verstage one needs a working buffer for
vboot. That buffer resides in the cache-as-ram region
which persists across verstage and romstage. The current
assumption is that verstage brings cache-as-ram up
and romstage tears cache-as-ram down. The timestamp,
cbmem console, and the vboot work buffer are persistent
through in both romstage and verstage. The vboot
work buffer as well as the cbmem console are permanently
destroyed once cache-as-ram is torn down. The timestamp
region is migrated. When verstage is enabled the assumption
is that _start is the romstage entry point. It's currently
expected that the chipset provides the entry point to
romstage when verstage is employed. Also, the car_var_*()
APIs use direct access when in verstage since its expected
verstage does not tear down cache-as-ram. Lastly, supporting
files were added to verstage-y such that an x86 verstage
will build and link.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using separate verstage.
Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When a separate verstage is employed the verstage file
was just being added through the cbfs-files mechanism.
However, that doesn't allow one to specify other flags
that aren't supported that an architecture may require.
The x86 architecture is one of those entities in that
it needs its verstage to be XIP. To that end provide
a mechanism for adding verstage with options.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using his mechansim on x86.
Change-Id: Iaba053a55a4d84d8455026e7d6fa548744edaa28
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11819
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This partially reverts commit 33b535f1. After this commit, samsung/lumpy had its
internal USB EHCI controller broken, with no assigned IRQ.
PIRQA-PIRQH may be wired as edge-triggered interrupts, making them exclusive
for the GPIO to use. They cannot be used for PCI devices at the same time.
Change-Id: Ic90343401ac20ca8673baf927cd7703c3481aeab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/9993
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
If timestamps need to be enabled for t132-boards, build would break
because TIMESTAMP region does not exist. With this change, t132 boards
can enable "COLLECT_TIMESTAMPS" without any build error.
Change-Id: I283a5ec49b5af95bd524f590e352367b7cbfd83d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11893
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Changes to CR1 and CR2 were effectively overwriting the backlight
configuration from the devicetree with static values.
Instead read the maximum brightness value from BCLM (backlight
modulation frequency) and calculate the target level (Arg0 is the
target level as percentage).
Turned out that _BQC has to return a value from the list returned by
_BCL. So XBQC got a little heavier to search for the correct value.
Change-Id: I35419993c8250c95fc69ba4db30db9dba9e6f8ff
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11704
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
The two cases only differ in the register locations.
As the values in BRIG were all the same, consolidate them. They also
got normalized to percentages as the ACPI spec wants that (0x61 was 100%
before).
Change-Id: I9216a953bb89458ed102c39194ea370cbf463d5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11703
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Consolidate some common (and mostly broken) code. Will try to fix things
in separate commits.
Maybe, igd.asl taken from gm45 (the non-PCH case) could also be used for
i945 and sch. But this needs further investigation.
Change-Id: Id3663bf588458e1e71920b96a3149f96947921e9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11702
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The right files just need to be added to the verstage
build. Do that so a stand alone verstage builds and
links.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I2d0c98760494e2f4657ee35b6f155690939d2d18
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11827
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to build stand alone verstage the chromeos.c
file needs to be part of the verstage target.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Id2b05548e4e10cd12002286913f2228b84802e63
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11828
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The current method was only taking the cbfs path. Because
of this fsp.bin was never being utilized from the RW slots.
Using prog_locate() now provides both the cbfs and vboot
locate methods for free.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I2b3e088326d5a965ad90806a7950b9f401ed57de
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11831
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Leave the SPI controller enabled upon boot block exit.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Change-Id: I5b10d7cc8d5d350282206abe6a945bab66f97ada
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11825
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move base address into iomap.h. Use PCI symbols instead of SPI specific
symbols. Fix comments.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Change-Id: Id5d21603150b52fd1b71dd448105938bd6aff1a9
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11826
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to support x86 verstage proper the work buffer
needs to live in cache-as-ram. However, after cache-as-ram
is torn down one still needs the verification results to
know which slot was selected. Though the platforms with
a dedicated SRAM can just use the work buffer in SRAM, the
x86 cache-as-ram platforms need a place to stash the
results. For that situation cbmem is employed. This works
because when cbmem is initialized cache-as-ram is still
enabled. The VBOOT_DYNAMIC_WORK_BUFFER case assumes
verified boot doesn't start until after cbmem is up. That
doesn't change, but it's a goal to get rid of that option
entirely once all other x86 platforms are moved over to
pre-romstage vboot.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados with pre-romstage verification
as well as VBOOT_DYNAMIC_WORK_BUFFER case.
Change-Id: I7eacd0edb2b6ca52b59b74075d17c00b50676d4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11821
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On x86 the early stages are currently execute-in-place which
means they live in the memory-mapped spi flash. However, when
loading romstage from verstage the romstage is
execute-in-place so it's unnecessary to write over a read-only
media -- not to mention writing to read-only memory is wrong
to begin with.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Noted reduction of 20ms when
loading romstage.
Change-Id: I7cd399302a3925a05fbce82600b4c50ea66a0fcb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11823
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Bump up the romstage size to allow more breathing room.
Change-Id: I4df7031d286c13797dccdf2f49d023bbf462fbb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The conditions in cbmem console for supporting verstage
were implicitly utilizing CONFIG_BOOTBLOCK_CONSOLE to handle
the cbmem console enablement. Fix it so verstage is a first
class citizen for deciding actions pertaining to cbmem console.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using verstage. cbmem console
shows verstage output.
Change-Id: Iba79efd1c1d4056f1a105a5e10ffc95f3e69b597
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11820
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the purpose of isolating the work buffer logic
the surface area of the API was slimmed down. The
vb2_working_data structure is no longer exposed,
and the function signatures are updated accordingly.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If64184a79e9571ee8ef9822cfce1eda20fceee00
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11818
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For vboot1 there was an rmodule that was loaded and ran to
do the firmware verification. That's no longer used so remove
the last vestiges of VBOOT_STUB.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I6b41544874bef4d84d0f548640114285cad3474e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to introduce a verstage which performs vboot
verification the cache-as-ram environment needs to be
generalized and split into pieces that can be utilized
in romstage and/or verstage. Therefore, the romstage
pieces were removed from the cache-as-ram specific pieces
that are generic:
- Add fsp/car.h to house the declarations for functions in
the cache-as-ram environment
- Only have cache_as_ram_params which are isolated form the
cache-as-ram environment aside from FSP_INFO_HEADER.
- Hardware requirements for console initialization is done
in the cache-as-ram specific files.
- Provide after_raminit.S which can be included from a
romstage separated from cache-as-ram as well as one that
is tightly coupled to the cache-as-ram environment.
- Update the fallout from the API changes in
soc/intel/{braswell,common,skylake}.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302481
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11816
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The report_platform_info() and set_max_freq() are not being
used similarly on skylake and braswell. With the addition
of other SoCs I suspect a similar pattern will emerge. Instead
of having weak functions to ensure things link with the hardcoded
policy push these calls into their respective SoC homes.
For parity, both skylake and braswell were updated to be consistent
with the same calls prior to this patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Built braswell.
Original-Change-Id: I3371d09aff0629503254296955fef28d35754a38
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/303334
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2de33632ed127cac52d7075cbad95cd6387a1b46
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11815
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Eliminate unused parameters from the console initialization.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Original-Change-Id: Iacacea292d43615e9d2f8e5d3ec67e77f3f08906
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/301204
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: I3a0ea948ce106b07cb6aa872375ce588317dc437
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11814
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Latest FSPv83 made some change related to UPD/VPD
need this patch to align those
BUG=None
TEST=Build and Boot Cyan System
BRANCH=strago-7287.B
CQ-DEPEND=CL:*226897
Original-Change-Id: I6395f3a1f4eecaef14fc4720b00252f9e6143fa3
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291394
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303137
Original-Commit-Ready: John Zhao <john.zhao@intel.com>
Original-Tested-by: John Zhao <john.zhao@intel.com>
Change-Id: I9920eea84b802699454850bfde489668201ffeb6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11813
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On Skylake, mailbox interface is used to configure VRs, dropping direct msr
writing. With current fsp, svid/vr programming seems to be functional - no
errors are given in the svid transactions in boot, and hw engineer verified
the VRs on Kunimitsu. Additional tunnings might be needed later with power
testing.
24mhz calibration is no longer needed on Skylake due to bclk archtecture
change.
BRANCH=none
BUG=chrome-os-partner:45387
TEST=Built and boot on kunimitsu/glados, reboot, S3/resume verified.
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Change-Id: If99b5758fcdba8604139c761a07403d4a5d2eb4c
Original-Reviewed-on: https://chromium-review.googlesource.com/301470
Original-Commit-Ready: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I98acf78aac9c705614fb200f8c3313a89296fbf2
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11811
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
FSP is actually providing 64KiB to the bootloader.
Expand current footprint to match reality.
BUG=chrome-os-partner:44676
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Ibff243036eb4a6b9b9f331665a7e3efa1853bc91
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/300191
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Change-Id: Ibb876f49c3e5d8d1a3b8f6f74ed12a19663e4145
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11810
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Instead of just passing bits, tsc_low, tsc_high, and an
opaque pointer to chipset context those fields are bundled
into a cache_as_ram_params struct. Additionally, a new
struct fsp_car_context is created to hold the FSP
information. These could be combined as the existing
romstage code assumes what the chipset_context values are, but
I'm leaving the concept of "common" alone for the time being.
While working in that area the ABI between assembly and C code
has changed to just pass a single pointer to cache_as_ram_params
struct. Lastly, validate the bootloader cache-as-ram region
with the Kconfig options.
BUG=chrome-os-partner:44676
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Ib2a0e38477ef7c15cff1836836cfb55e5dc8a58e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/300190
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Change-Id: Ic5a0daa4e2fe5eda0c4d2a45d86baf14ff7b2c6c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11809
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It builds only on veyron_* which already select it, no need to ask user.
Change-Id: Ie508b9eade16e0f39073b23dc0da6b6d1e0a4c73
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10380
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
board_id() returns an integer which is platform-specific. 0 for one port
is different from 0 for another port. So there is no default board_id()
and hence enabling it on boards other than urara would cause build failure.
Not enabling it on urara or just setting id to "(none)" as is default results
in board_id() = 0 which means urara and an error message on console.
Change-Id: I94618f36a75e7505984bbec345a31fe0fa9cc867
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10379
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Fixes linking error. Specifies that we're in text mode.
Change-Id: I7ad258961039c19e1491e2b3832b003671d8a5c7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11848
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
E.g. on my MacbookAir to generate spd.bin to be used
with coreboot I do:
./inteltool -S spd.bin
Change-Id: If165475ed3e1f3262a8926ef619128d25b1e2896
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11847
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
MBa doesn't have a usable usbdebug port.
Change-Id: Ia8459daa5c9b9405c289954b28ecf1423b1f076c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11849
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Update to commit 832bc6f1 (Remove microcode stored in C-array format),
which is the latest commit in the BLOBs repository.
Building the Lenovo X60 currently fails as the microcode file cannot be
found.
CREATE build/mainboard/lenovo/x60/cbfs-file.wkWhPK.out (from src/mainboard/lenovo/x60/cmos.default)
make: *** No rule to make target '3rdparty/blobs/cpu/intel/model_69x/microcode.bin', needed by 'build/cpu_microcode_blob.bin'. Schluss.
Change-Id: I40ebceec299f46c19fd60861d872adcd91df3610
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11865
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Taken from cbfstool.
Change-Id: I4387900517dbfb1aa51ae6f679e26d0cf5b2acf8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11808
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Tested on T60 with intel graphics.
Change-Id: Id74d0a1315749052e7313135242e6b64862aa5e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5345
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I207fa981370d72c26e6fb1f07f3cd2d1f9d44d04
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11855
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Only one value would work with corresponding gma code currently (which one
depends on board). Going forward, it's possible to compute which number can
be used, so there is no need to keep this info around.
Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11862
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Based on the info by Felix Held.
Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11857
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iff1864982f2f3337c33e56976a0d4eb36f171e66
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11854
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I036c2c300b2aac38b2c30ab86623c9c46b3c5c98
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11850
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
MBA has eDP and not LVDS, so it's not supported by our native init.
Change-Id: I489b7a98163b648f0e8000202117593c6b1aaf31
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11842
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
MBA has a soldered RAM without SPD, so you need to use stored SPD.
Change-Id: I0205e6c65ccbfe7764c12c815e60801a3c3623a5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11841
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Just ran autoport on the data from MacBookAir4,2
Change-Id: Iba2a56a6846d81d29e6b090a9a31253ce240914d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11840
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I7695e797b4924d371efc6c7b5c972ea4fdb0ba2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11863
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Make sure edge write test results are sane.
Check rn.all to make sure rn.start and rn.end are valid.
Most likely the following test is going to fail on the same
rank anyway.
Change-Id: Ifa601406e6c74ceb8d70063be5ce1bf6bc512c18
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11247
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Don't disable PEG bits while turning on IGD.
Fixes PCI device enumeration of PEG devices.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
Sidenote: This should be taken from a CMOS option instead.
Change-Id: I2d6522504e4404f2d57f9c319351d08317aefdcb
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11058
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Activate PEG clock-gating only if all PEG devices are disabled.
Fixes system hang when trying to access PEG registers.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
Change-Id: I7d62fbb83c16741965639cea1a0e4978d4e3d6da
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11059
Tested-by: build bot (Jenkins)
|
|
Currently cbfstool would reject non-alpanumeric characters in
image names. Underscore is not alphanumeric and is used in some
default fmaps. This change allows image names to contain all
"printable" characters except spaces.
Change-Id: I6ba2b581d5623f5b028149ece0169892ea63fd04
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: http://review.coreboot.org/11807
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since we now have more freedom in the bootblock linking step it no
longer makes sense to use a monolithic bootblock.S. Code segments must
still be included as the order in bootblock.S determines code flow.
However, non-code flow related assembly stubs don't need to be directly
included in bootblock.S
Change-Id: I08e86e92d82bd2138194ed42652f268b0764aa54
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11792
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The code flow doesn't fall through to walkcbfs, as it does in the rest
of bootblock.S. Instead, walkcbfs is called (albeit via a jmp). The
linker cannot know this when walkcbfs.S is included directly.
When we use a CAR bootblock, we lose several hundred bytes because
walkcbfs is not garbage-collected, yet it isn't used. This problem
is solved by assembling walkcbfs.S separately, and linking it.
Change-Id: Ib3a976db09b9ff270b7677cb4f9db80b0b025e22
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11785
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As part of preparing for systems with non-memory-mapped media, we want
to be able to call into C code. This change allows us to link C code
directly into the bootblock. The steps of going from bootblock main()
to CAR setup to C code will be implemented in subsequent patches.
Note that a few files selected with bootblock-y will now be compiled
for the bootblock as well, but since we enabled garbage collection,
they will not be included in the final binary.
Change-Id: I5ca6dcaf176f5469c6a3bb925859399123493bc6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11783
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The only difference between the ifeq/else/endif guarded rules is the
linker flags specific to x86. Add those flags to LDFLAGS_bootblock,
and only use one rule for bootblock.debug.
Change-Id: I986a93e0418f05fb273512d7efe0573052493332
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11782
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The macro is defined in `util/cbmem/cbmem.c` too, so do the same here,
so that searching for that macro name shows all the usages.
Change-Id: I52e9fa414fbbe2012bc6d00312db528efba3e564
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11803
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Commit 47818b4d6017b89e398cfbc86e3c437e0f81cfdf
(fsp/cache_as_ram.inc and boards: Fix incorrect usage of POST_IO)
breaks the logic which decides whether FSP
could be found or not in cache_as_ram.inc.
Fix the error by inverting the logic of the test.
TEST=Bootet mc_tcu3 board
Change-Id: I993d3422ac406d204a53e4dc890210fb9a52469d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11806
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Now that cbfs is adding more metadata in the cbfs file
header one needs to access that metadata. Therefore,
add struct cbfsf which tracks the metadata and data
of the file separately. Note that stage and payload
metadata specific to itself is still contained within
the 'data' portion of a cbfs file. Update the cbfs
API to use struct cbfsf. Additionally, remove struct
cbfsd as there's nothing else associated with a cbfs
region aside from offset and size which tracked
by a region_device (thanks, CBFS_ALIGNMENT!).
BUG=None
BRANCH=None
TEST=Built and booted through end of ramstage on qemu armv7.
Built and booted glados using Chrome OS.
Change-Id: I05486c6cf6cfcafa5c64b36324833b2374f763c2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The x86 bootblock linking is a mess. The bootblock is treated in
a very special manner, and never received the update to link-time
garbage collection.
On newer x86 platforms, the boot media is no longer memory-mapped.
That means we need to do a lot more setup in the bootblock. ROMCC is
unsuitable for this task, and walkcbfs only works on memory-mapped
CBFS. We need to revise the x86 bootflow for this new case.
The approach this patch series takes is to perform CAR setup in the
bootblock, and load the following stage (either romstage or verstage)
from the boot media. This approach is not new, but has been done on
our ARM ports for years.
Since we will be adding .c files to the bootblock, it is prudent to
use link-time garbage collection. This is also consistent to how we
do things on other architectures. Unification FTW!
Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11781
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Up to now, the multi-CBFS code path merely looked up files in the "boot
ro" image (ie. the default), disregarding the specified fmap region to
use for CBFS.
The code still relies on the master header being around, which on the
upside allows it to skip an offset at the beginning of the region (eg.
for ARM bootblocks).
This will change later (both the reliance on the master header and the
presence of the bootblock like this).
Change-Id: Ib2fc03eac8add59fc90b4e601f6dfa488257b326
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
POST_IO is a user-visible config bool. fsp_1_0/cache_as_ram.inc made a
mess of it, by forcing a build-time error when CONFIG_POST_IO was not
being set. fsp 1.0 boards ended 'select'ing this in their Kconfig.
Refactor fsp/cache_as_ram.inc handling of POST codes, and remove the
"select POST_IO" from boards that have it. Instead of implementing an
ad-hoc changing post code display and a delay based on port 0xed, just
encode the FSP failure code in the POST code. Since FSP failure codes
are > 16, we can encode the failure code in the lower nibble, and theirfailing function in the upper nibble.
Change-Id: Iaa3e6533e8406b16ec0689abd704984d79293952
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8485
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
There is no other guard to prevent this from being picked up when
building for other architectures.
Change-Id: I2039a289a4dd9970d5dd0f90d43d5d5c2a6d0a0b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11795
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The binutils-2.25 has added some new line, making the hunk
move downward a little. The utility patch can fix the offset
with "fuzz" message. So, recreate the patch to avoid that
message.
Change-Id: Ie659a8faf923465f6d47f7c0c0bf903c5eb903ab
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11639
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Clang is the default compiler on BSD and OS X. With this
change, we don't have to install gcc any more. Clang can
act as host cc.
This is a known issue on GNU mail list. Please refer
the link below.
https://sourceware.org/bugzilla/show_bug.cgi?id=17473
Change-Id: I0f014b776e86e6d0cbebd560cb17f469f31e1dfb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11638
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Grep the output of wget, showing only the percentage.
Leave the final "100%" unerased.
Checking return code of wget is removed.
Change-Id: I4559e88d541738a594dce92e23589992f234cb9b
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The error-prone interface of cbfs_get_file_content() led to another
possible NULL dereferencing. So check for CBFS_DEFAULT_MEDIA here
like the other functions do.
Change-Id: Ib8732160d389e9ecceb44f28be0e7de9a1d66e04
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11796
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Building an image for the Lenovo X201 with native graphics
initialization selected fails due to the changes introduced by commit
a3b898aa (edid: Clean-up the edid struct).
Same as in 11738 / 11585 / 11491
Change-Id: I4233a4ce2f5423c7ebdad68e8059cd34ac61cfaa
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/11787
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Users of DRIVERS_UART_8250MEM_32 would have to also select
DRIVERS_UART_8250MEM to avoid missing Kconfig dependencies. Instead,
do what the OXPCIE driver dies and select the appropriate options.
Change-Id: I40d93df024fcb3a9ad6dc51d6a5966e7b1b6c07f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11786
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
mohonpeak is the reference board for Rangeley. I doubt anyone uses it
or cares about it. We jokingly refer to it as "Moron Peak". It's code
with no known users, so we shouldn't be hauling it around for the
eventuality that someone might use it in the future.
Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11790
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
We already have two other code paths for this silicon. Maintaining the
FSP path as well doesn't make much sense. There was only one board to
use this code, and it's a reference board that I doubt anyone still
owns or uses.
Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11789
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
This is a sad story. We have three different code paths for
sandybridge and ivybridge: proper native path, google MRC path, and,
everyone's favorite: Intel FSP path. For the purpose of this patch,
the FSP path lives in its own little world, and doesn't concern us.
Since MRC was first, when native files and variables were added, they
were suffixed with "_native" to separate them from the existing code.
This can cause confusion, as the suffix might make the native files
seem parasitical.
This has been bothering me for many months. MRC should be the
parasitical path, especially since we fully support native init, and
it works more reliably, on a wider range of hardware. There have been
a few board ports that never made it to coreboot.org because MRC would
hang.
gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so
the effort was abandoned at first. Once the native path became
available, the effort was restarted and the board is now supported.
In honor of the hackers and pioneers who made the native code
possible, rename things so that their effort is the first class
citizen.
Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11788
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
Change-Id: I2e10ccac3248717d90838ca721cc691de792b507
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11780
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
When adding an FSP blob relocate it to its final
destination. This allows FSP to not be hard coded in
the cbfs. In order for the include paths to work
correctly w/ the edk 2 headers we need to supply
a neutered ProcessorBind.h to match up with the
tool environment such that one can get the UEFI
Platform Initialization type definitions.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados and booted. Also added FSP with -b and manually
adjusted location in fsp cache-as-ram. Booted as well.
Change-Id: I830d93578fdf745a51195109cf18d94a83ee8cd3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11778
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Certain chipsets provide their own main symbol for verstage.
Therefore, it's necessary to know this so that those chipsets
can leverage the common verstage flow.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan using this option.
Change-Id: If80784aa47b27f0ad286babcf0f42ce198b929e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Though the tegra124 SoC makes their faster cpus come up
in verstage it can still use the common flow. Therefore,
use the common verstage API for performing thenecessary
steps to initialize the caches on the faster cores.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan.
Change-Id: I93023ec92a9de111db688742b057b5c64143f0b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11776
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The file was not referenced or used. Kill it.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=None
Change-Id: I30285d523ef3ca4dd3ce38b53aeb42862d929c90
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11775
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For shared compilation units between coreboot proper
and cbfstool that means one needs to provide printk
logging. Therefore, provide printk() at <console/console.h>
to mimic coreboot's environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool with code that includes and uses
<console/console.h>.
Change-Id: I8e54d403526a397e4fd117738a367a0a7bb71637
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There are compiler settings and interactions with other
header files that should be handled. First use __typeof__
instead of typeof because 'std' modes don't accept typeof.
The __typeof__ variant works equally well on clang. The
other change is to guard the helper macros so as not to
trigger redefinition errors.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool including commonlib/helpers.h
Change-Id: I58890477cb17df14a9fa8b7af752a7c70769cf36
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11773
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to support FSP 1.1 relocation within cbfstool
the relocation code needs to be moved into commonlib.
To that end, move it. The FSP 1.1 relocation code binds
to edk2 UEFI 2.4 types unconditionally which is separate
from the FSP's version binding.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Ib2627d02af99092875ff885f7cb048f70ea73856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11772
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that the commonlib/endian.h routines have landed utilize
those in the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If431d64fd2843bea864d971ca1ea06b07c0d6435
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11771
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Older gcc versions throws a warning when a struct or union is
declared without a valid name (anonymous). This patch enables the
feature for older gcc versions so that no warning will be issued.
Change-Id: Idc5481f4d5723c5090a6f7d7dbb0686a737e11fc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove dummy data from hwinfo.hex as it is not needed
anymore in the system.
Change-Id: I4f328a4ef61741039eb2c030e23fea33f539c2bb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11763
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Since microcode was moved to 3rdparty/blobs, we need to select
USE_BLOBS in Kconfig to get the submodule 3rdparty/blobs automaticaly.
Change-Id: I25e574fd90b830448cacccd16d01a5a2dbc8517d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11764
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
I missed these Makefile.inc changes. As verstage.c was removed
remove the references within the Makefile.incs.
Change-Id: I5d38c0a87d057622a3706bf3bde1142944c3b17c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11759
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
They allow optimizing a verification of a whole CBFS image by only
dealing with the headers (assuming you choose to trust the hash
algorithm(s)).
The format allows for multiple hashes for a single file, and cbfstool
can handle them, but right now it can't generate such headers.
Loosely based on Sol's work in http://review.coreboot.org/#/c/10147/,
but using the compatible file attribute format. vboot is now a hard
dependency of the build process, but we import it into the tree for
quite a while now.
Change-Id: I9f14f30537d676ce209ad612e7327c6f4810b313
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11767
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I1c5e3424cb56f1f10e75bb07db084c3500f3ba07
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11768
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We need to emit some hex strings.
Change-Id: I9e7e184282f6ad0470f2e269f5dc874e78f8b697
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11766
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since fsp_baytrail was refactored to use microcode.bin
in 3rdparty/blobs, we do not need MICROCODE_INCLUDE_PATH any more.
Change-Id: I4382b0c174877186bd37fbff21f3269136d15e10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11762
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Building an image for the Lenovo X200 with native graphics
initialization selected fails due to the changes introduced
by commit a3b898aa (edid: Clean-up the edid struct).
Change-Id: Ifd36571c9c00761b4a2a6deb3c9c4a52d9d13e25
Signed-off-by: Audrey Pearson <apearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11738
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Building coreboot with the SeaBIOS or FILO payload selected, their config and
revision are added to CBFS.
```
Creating out/bios.bin.elf
CBFS coreboot.rom
PAYLOAD payloads/external/SeaBIOS/seabios/out/bios.bin.elf (compression: LZMA)
CONFIG .config
REVISION build.h
CONFIG payloads/external/SeaBIOS/seabios/.config
REVISION payloads/external/SeaBIOS/seabios/out/version.c
CBFSPRINT coreboot.rom
```
Align the path of the payload config by removing one space.
Change-Id: Icbb139c28b9dcb8d31989a48fa4fbe4a9b088972
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11710
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
vboot_handoff_flag was duplicating the logic to grab the handoff info, that is
already made available with vboot_get_handoff_info.
This uses vboot_get_handoff_info in vboot_handoff_flag instead.
Change-Id: I28f1decce98f988f90c446a3a0dbe7409d714527
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11498
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Inspired by the Sage source code (itself from coreboot).
Change-Id: I4864923166efb200882d895c572d1ee060c71951
Signed-off-by: Maxime de Roucy <maxime.deroucy@gmail.com>
Reviewed-on: http://review.coreboot.org/11730
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iecefdd1e827e4eb8b4da573e4291850d6c47767f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11754
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The thermal sensor interface exposed in function 3 of the northbridge is
a more convenient and faster way to access the processor-internal
thermal sensor than using the SMBus/SB-TSI interface from the FCH, see
the Family14 BKDG: "Tctl is a processor temperature control value used
for processor thermal management. Tctl is accessible through SB-TSI and
D18F3xA4[CurTmp]. Tctl is a temperature on its own scale aligned to the
processors cooling requirements"
Also on at least some of these boards the existing thermal zone is
broken and always returns 40C (the default value if the SMBus read
failed) because the SMBus muxing register (SmBus0Sel) is not set up
correctly.
Case in point: The fallback "smbus read failed" temperature is 40 C and
the the logs taken from the board status repository for the Asrock
E350M1 board all show: "ACPI: Thermal Zone [TZ00] (40 C)"
e.g.
http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-5054-gf584218/2013-12-20T20:56:20Z/kernel_log.txt#l390
and
http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-7030-g6d7de4f/2014-10-16T15:34:19Z/kernel_console.txt#l404
and
http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-9989-gf2dfef0/2015-06-13T00:22:49Z/kernel_log.txt#l425
Example lm-sensors output with this patch on the pcengines APU1, on
Linux 4.1.0-rc8+ (wiht both CONFIG_ACPI_THERMAL and
CONFIG_SENSORS_K10TEMP enabled):
acpitz-virtual-0
Adapter: Virtual device
temp1: +54.0 C (crit = +100.0 C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +54.0 C (high = +70.0 C)
(crit = +100.0 C, hyst = +97.0 C)
Change-Id: Id9c5b783ba424246816677099ec6651814e59f21
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/10940
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add some missing devices to device tree and header.
Remove the obsolete devices.
Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11378
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
