| Age | Commit message (Collapse) | Author |
|---|
|
Check if the installed Golang version is >= 1.9.
Change-Id: I9fd74fa8dc5e906e8b54ff5afaf69609fe957960
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29445
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some variants of nami will have a fingerprint MCU.
BUG=b:118503113
BRANCH=Nami
TEST=None (build and boot, but no hw yet)
Change-Id: I446dc09cdf7f84a801723cb403d2de80e0997c65
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
TEST=Make the printk reachable, check with
`strings build/cbfs/fallback/romstage.elf | grep lowest`
that this patch changes "MHzas" to "MHz as".
Change-Id: I42033d2f184e424818edf844cf6cf84ea07d7ed5
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/29346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Marvell is the chip company, Marvel makes comic books.
Change-Id: I437ac0d4fc706fbb62a0a74ca74a197dba4499fb
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/29347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. Change the pointers
or add parenthesis to force a proper order that will not cause compile
errors if compiled with a different compiler, and more importantly, don't
have unsuspected side effects.
BUG=b:118484178
TEST=Build and boot grunt.
Change-Id: Ibfeb83893f09cb897d459856aff2a4ab2a74e6e5
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
WWAN start-up control requires RESET# assert after FULL_CARD_POWER_OFF#
set to high more than 10 ms, so force RESET#(GPP_D21) to low at
bootblock stage to match the sequence.
BUG=N/A
TEST=Boot up Sarien/Arcada board, check WWAN get detected as USB
devices through lsusb.
Change-Id: I36eb841a2e8f2b36771d20577314a7451fbee133
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I42a33ffb66ffa2f938f85484ffc3a0d3788816b3
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/28837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
soc_rtc_init() is executed in ramstage
The soc_rtc_init() needs to be executeed before FSP is called. Move the RTC
init from ramstage to romstage.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: Ic19c768bf9d9aef7505fb9327e4eedf7212b0057
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/29397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
PCH ISH enabled/disabled in FSP memory init UPD, it will be match the
setting in ISH device on/off in devicetree.cb.
BUG=N/A
TEST=Build and pass on whiskey lake rvp platform.
Change-Id: I6889634bf65e7ce5cc3e3393c57c86d622f1ac68
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
This change removes the function defintions from variant
so that the weak definition in baseboard can be used.
Refer to CL:813944.
BUG=none
BRANCH=master
TEST=Build and boot on DUT
Change-Id: I561414fcc94e3c812bb88730df9b94e332c61781
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update GPP_D9 to fix audio jack can't detect issue.
BUG=b:118393646
BRANCH=master
TEST=Verify audio jack can auto detect.
Change-Id: I87d24ed294c1ddc59bbd6ba9194c76d1f66413f3
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This Phase #2 follows the CL done on Phase #1 (Change-Id: I0236e0960cd)
Change-Id: Ia296e1f9073b45c9137d17fbef29ce4fdfabcb7c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29369
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IORR MTRR definitions renamed to avoid collision
between <cpu/amd/mtrr.h> and <AGESA.h>.
Change-Id: I3eeb0c69bbb76039039dc90683670cafcb00ed36
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29352
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use GPIO_134 as the EC sync interrupt and provide this value
to the embedded controller to be exported to the OS.
BRANCH=none
BUG=crbug:896347, b:118443377
CQ-DEPEND=CL:1298699
TEST=verify sensor events coming in on a reworked board
with companion EC and kernel patches
Change-Id: I41333cabe97bc8b0d59e19d84366f2ea2a59e026
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-on: https://review.coreboot.org/29278
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Several FSP silicon init UPD have been moved to memory init stage, modify
the coreboot accordingly. The UPDs below are affected:
SkipMpInit
VtdBaseAddress
VtdDisable
X2ApicOptOut
BUG=N/A
TEST=Build pass with FSP revision 7.0.47.50.
Change-Id: Ic0416dcd9ea1fe063cdd0c2f27257cd4cb4ba7e8
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29260
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SBI is runtime service for OS. For an introduction, please refer to
https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.md
Change-Id: Ib6c1f21d2f085f02208305dc4e3a0f970d400c27
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/28096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Each stage performs some basic initialization (stack, HLS etc) and then
call smp_pause to enter the single-threaded state. The main work of each
stage is executed in a single-threaded state, and the multi-threaded
state is restored by call smp_resume while booting the next stage.
Change-Id: I8d508c3d0f65a022010e74f8edad7ad2cfdc7dee
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/29024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
See https://doc.coreboot.org/arch/riscv/ we know that we need to execute
smp_pause at the start of each stage and smp_resume at the end of each
stage.
Change-Id: I6f8159637bfb15f54f0abeb335de2ba6e9cf82fb
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/29023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
Add option for Nanya NT6CL256T32CM-H1 part.
Add comments to indicate total memory size for convenience.
BUG=b:118624505
BRANCH=master
TEST=none
Change-Id: I82200e7b3d0a13295cb38f53ab576697ff8d302b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/29341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic08b191ee4dbcc56eb482601aa268394545936ba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29292
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib3aafcc586b1631a75f214cfd19706108ad8ca93
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29285
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0668b73cd3a5bf5220af55c29785220b77eb5259
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29103
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After a {break,return}, "else" is generally not needed.
Change-Id: I6145424ef8ffe6854c18c1d885f579d37853a70c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29267
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After a {break,return}, "else" is generally not needed.
Change-Id: Id55af179f63316f7218e93978628cbe05e94e0aa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Using a conditional statement to return 0 or 1 depending on a logic
value is unnecessarily complex.
Change-Id: I449ce2b71b72374de5ec4986f9cc9f91a67856ee
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29265
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the Linuxboot build directory to .gitignore.
Change-Id: Ic11311e2de544a334043a55eda42643d9df3374d
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I2d9e06f06a39dc76a3c1351d7976505d7bd92d10
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There are some small mistakes in these recently-added mainboards:
- board_info.txt: Lists board socket incorrectly.
- cmos.default: Loglevel was decreased some time ago.
- devicetree.cb: Spelling mistake.
- Kconfig: Mainboard name does not have a hyphen.
Change-Id: I08d9b06e79683acd3994b84647bce401ed6741e2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/29446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Get board id from AUXIN4 and RAM code from AUXIN3.
BUG=b:80501386
BRANCH=none
TEST=AUXIN4 is 0.074v and AUXIN3 is 0.212v on P0.
AUXIN4 is 0.212v and AUXIN3 is 0.212v on P1.
Change-Id: I50533e851d2fae66ae8c5e4e1aa36708d9058e94
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/29062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We plan to get board id and RAM code from AUXADC on Kukui. Add AUXADC
driver to support it.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I121a6a0240f9c517c0cbc07e0c18b09167849ff1
Signed-off-by: Po Xu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/29061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The Sarien mainboard uses the newly added Wilco EC.
- enable CONFIG_EC_GOOGLE_WILCO
- add the device and host command ranges to the devicetree
- have the mainboard SMI handlers call the EC handlers
- add EC and SuperIO devices to the ACPI DSDT
- call the early init hook for serial setup
Change-Id: Idfc4a4af52a613de910ec313d657167918aa2619
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a variant of the Sarien board called Arcada. This is currently
very similar to Sarien with differences in PCIe, USB, and GPIO usage.
Change-Id: I432d2ba99558e960d4e775c809cc8bf6aa1a56bf
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29410
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sarien is a new board using Intel Whiskey Lake SOC. It also uses
the newly added Wilco EC, enabled in a separate commit.
Sarien is not a true reference board, it is just one variant of
a very similar design. For that reason it is not considered the
baseboard but rather a standalone variant.
Change-Id: I2e38f617694ed2c2ef746ff8083f2bfd58cbc775
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a way for the mainboard to provide a wake pin that the EC
will use to wake the system. This defines a _PRW object.
Change-Id: I94954104bbb8226683c37abc8c0465fe3c62a693
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29408
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable GPIO functionality in verstage so platforms can read a
PCH GPIO in verstage to determine recovery mode.
Change-Id: Icd4344c4d66dbe21fda9dc27e61a836c1dd9be07
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29407
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Download the linux kernel tarball with curl.
Curl is already a dependency for coreboot.
Change-Id: I2e0bee3286593bd8e93b4d645242898eb9a14015
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Enable 8250 uart drivers on default defconfig.
- makes it easier to debug. (qemu -nographic)
- Kernel size increases only by 20kB.
Change-Id: I8309ecf7afd74b3c4021effedcac47350b442173
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The default ARCH defconfig should not override a custom defconfig.
Change-Id: I9de24497ef6296029c66a94124bc11a0bb4d0107
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Since the `PCI_DEVICE_ID_HSW_*` constants are no longer used, remove
them.
Change-Id: I84f1f069faa6a4165cf289f2e6c40889a49cad1d
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable the radium touchscreen support
BUG=b:117960394
BRANCH=master
TEST=
1. emerge-nami coreboot chromeos-bootimage
2. boot up on ekko DUT to check touchscreen device by evtest
/dev/input/event3: Raydium Touchscreen
Change-Id: I16167d5d3ce6eac9d64832b52bb1945999a63a90
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29365
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5f2d9548b8e2c7b1d154b7bad126ec7b1052231a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Modify flash layout to match ICL-IFWI layout for early SoC PO support
Flash Reg 0: Descriptor [0x0 - 0xFFF]
Flash Reg 1: BIOS [0x400000 - 0xFFFFFF]
Flash Reg 2: IFWI (consist of ME primary & secondary partition and PMC FW)
[0x81000 - 0x3FFFFF]
Flash Reg 8: EC (applicable for Intel RVP with internal EC support)
[0x1000 - 0x80FFF]
Change-Id: I462a384739b5972d9a59569ffdcadba7cdef6a81
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29316
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The function `acpi_fill_madt()` is identical among all the Lynx Point
boards and sb/intel/bd82x6x, so share a common function between them.
Earlier Intel platforms have similar implementations of this function.
The common implementation might only need minor alterations to support
them.
Tested on an ASRock H81M-HDS and Google Peppy (variant of Slippy). No
issues arose from this patch.
Change-Id: Ife9e3917febf43d8a92cac66b502e2dee8527556
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file
that does not already include <stdint.h>, compilation errors result.
Adding the necessary <stdint.h> inclusions fixes compilation for an
ASRock H81M-HDS.
Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The platform.asl file is copied from sb/intel/bd82x6x, and also matches
the contents deleted from each mainboard's platform.asl.
Tested on an ASRock H81M-HDS and a Google Peppy board (variant of
Slippy). No issues arose from this patch.
Change-Id: I539e401ce9af83070f69147526ca3b1c122f042c
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On an ASRock H81M-HDS neither libgfxinit, nor Linux, is able to
initialise the display when lanes are not configured to be shared
between DDI A and DDI E.
Intel's reference manual [1] states that the decision to share lanes
between DDI A and DDI E is "based on board configuration". Hence, add a
new field to the devicetree that boards can set. All existing Haswell
boards have this unset, thus taking a value of 0, so there is no change
to existing behaviour.
[1]: Intel Open Source Graphics Programmer's Reference Manual (PRM)
Volume 2c: Command Reference: Registers (Haswell)
https://01.org/linuxgraphics/documentation/hardware-specification-prms/2013-intel-core-processor-family
Change-Id: I6f7832293215d2b53e31b0a5c985e6098eb72f1b
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29385
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On my system (Pentium G3258, ASRock H81M-HDS), changing the the slow
ramp rate during `initialize_vr_config()` results in the following
exception, causing the system to hang.
CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000
edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90
So, only change this setting for Haswell ULT CPUs, as suggested by the
BIOS Writer's guide.
Change-Id: I79b10139295741d298ac6c77c4f7272ac151ad90
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29384
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the Haswell-specific monotonic timer is used on an ASRock H81M-HDS
with a Pentium G3258, the following exception is generated, causing the
system to hang.
CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000
edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90
The exception occurs when trying to read `MSR_COUNTER_24_MHz`, located
at 0x637. This MSR only exists on Haswell-ULT CPUs.
So, allow boards to use the TSC monotonic timer instead. They can do
this by placing `select TSC_MONOTONIC_TIMER` in the mainboard Kconfig.
Change-Id: I31d0e801b8cc85330dcb70c3fc03670f2e677e8f
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The super I/O setup needs to be done after the LPC is enabled. For
Lynx Point, configuring the super I/O in `mainboard_romstage_entry()`
is too early to get a serial console output. To remedy this, add a
function `mainboard_config_superio()` that will be called at the
appropriate time, and can be overridden by mainboard code.
Change-Id: Iaf4188a17533c636e7b0c7efa220bc6a25876dda
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch is based on a8a9f34e9b7b ("sb/intel/i82801{g,j}x:
Automatically generate ACPI PIRQ tables")
Tested on an ASRock H81M-HDS. The generated _PRT object looks correct,
and the system doesn't show any issue when running. The following
assignments occur:
ACPI_PIRQ_GEN: PCI: 00:02.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:03.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:14.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:16.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1a.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1b.0: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1c.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1c.1: pin=1 pirq=1
ACPI_PIRQ_GEN: PCI: 00:1c.2: pin=2 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1c.3: pin=3 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1d.0: pin=0 pirq=7
ACPI_PIRQ_GEN: PCI: 00:1f.2: pin=1 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1f.3: pin=2 pirq=2
Also tested on a Google Peppy board. The following assignments occur:
ACPI_PIRQ_GEN: PCI: 00:02.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:03.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:14.0: pin=0 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1b.0: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1c.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1d.0: pin=0 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1f.2: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1f.3: pin=1 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1f.6: pin=2 pirq=1
A diff of the _PRT object for the Google Peppy board is below. The code
used in the diff has been modified for clarity, but the semantics remain
the same. To summarise the diff:
* The disabled PCIe root ports are no longer included.
* The LPC controller is no longer included, as it has no interrupt pin.
The pins for the remaining LPC devices are each one less. Perhaps the
original _PRT object was incorrect?
* The SDIO device is no longer included, as it is disabled.
* The Serial IO devices are no longer included, but that is due to a
separate issue I am having with this system (the devices don't show up
under Linux regardless of this patch). In short: their omission is not
a fault of this patch.
--- pre/_PRT
+++ post/_PRT
@@ -1,301 +1,157 @@
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
If (PICM)
{
- Return (Package (0x12)
+ Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
Zero,
Zero,
0x10
},
Package (0x04)
{
0x0003FFFF,
Zero,
Zero,
0x10
},
Package (0x04)
{
0x0014FFFF,
Zero,
Zero,
0x12
},
Package (0x04)
{
0x001BFFFF,
Zero,
Zero,
0x16
},
Package (0x04)
{
0x001CFFFF,
Zero,
Zero,
0x10
},
- Package (0x04)
- {
- 0x001CFFFF,
- One,
- Zero,
- 0x11
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x02,
- Zero,
- 0x12
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x03,
- Zero,
- 0x13
- },
-
Package (0x04)
{
0x001DFFFF,
Zero,
Zero,
0x13
},
Package (0x04)
{
0x001FFFFF,
Zero,
Zero,
0x16
},
Package (0x04)
{
0x001FFFFF,
One,
Zero,
0x12
},
Package (0x04)
{
0x001FFFFF,
0x02,
Zero,
0x11
- },
-
- Package (0x04)
- {
- 0x001FFFFF,
- 0x03,
- Zero,
- 0x10
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- Zero,
- Zero,
- 0x14
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- One,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x02,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x03,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0017FFFF,
- Zero,
- Zero,
- 0x17
}
})
}
Else
{
- Return (Package (0x12)
+ Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
Zero,
^LPCB.LNKA,
Zero
},
Package (0x04)
{
0x0003FFFF,
Zero,
^LPCB.LNKA,
Zero
},
Package (0x04)
{
0x0014FFFF,
Zero,
^LPCB.LNKC,
Zero
},
Package (0x04)
{
0x001BFFFF,
Zero,
^LPCB.LNKG,
Zero
},
Package (0x04)
{
0x001CFFFF,
Zero,
^LPCB.LNKA,
Zero
},
- Package (0x04)
- {
- 0x001CFFFF,
- One,
- ^LPCB.LNKB,
- Zero
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x02,
- ^LPCB.LNKC,
- Zero
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x03,
- ^LPCB.LNKD,
- Zero
- },
-
Package (0x04)
{
0x001DFFFF,
Zero,
^LPCB.LNKD,
Zero
},
Package (0x04)
{
0x001FFFFF,
Zero,
^LPCB.LNKG,
Zero
},
Package (0x04)
{
0x001FFFFF,
One,
^LPCB.LNKC,
Zero
},
Package (0x04)
{
0x001FFFFF,
0x02,
^LPCB.LNKB,
Zero
- },
-
- Package (0x04)
- {
- 0x001FFFFF,
- 0x03,
- ^LPCB.LNKA,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- Zero,
- ^LPCB.LNKE,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- One,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x02,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x03,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0017FFFF,
- Zero,
- ^LPCB.LNKH,
- Zero
}
})
}
}
Change-Id: Id3f067cbf7c7d649fbbf774648d8ff928cb752a4
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested on a Pentium G3258.
Change-Id: Ibf020c034c00b3bf3a7b0cda8bd3a7d40c4c13bd
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: I3679d1ab0ae08726bff04c5985d6d93437b2fb81
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: Ie162cb7a27e313ffe612659e8444657a3772d3c9
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Romstage is where DRAM comes online. Therefore, allow
raw CAR_GLOBAL object access in all cache-as-ram stages
that are not romstage. In practice, this should be a nop.
However, the explicit check for romstage is clearer.
Change-Id: I31454c05029140a946ef663b8fa1b2fa6a788154
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/29401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For platforms utilizing CONFIG_NO_CAR_GLOBAL_MIGRATION there's
no need to automatically migrate globals. Because of this it's
possible to automatically allow for uninitialized global variables
which reside in the .bss section without needing to decorate those
objects with CAR_GLOBAL.
Change-Id: Icae806fecd936ed2ebf0c13d30ffa07c77a95150
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/29359
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: Idc222392a0973f9ea62b943d18dd762b48c76d17
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI IDs were taken from the Intel Lynx Point datasheet [1].
[1] Intel® 8 Series/C220 Series Chipset Family Platform Controller Hub
(PCH) Datasheet, revision 003, document number 328904.
Change-Id: Ie4a264e9325d185334c3d7f7d2ed3c394ac33059
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change the variant name from kalista to karma.
According to the CL:1298319, the baseboard name is kalista
and the board name is karma.
BUG=none
BRANCH=master
TEST=emerge-kalista coreboot chromeos-bootimage
Change-Id: Idea295cc14249721a6dc0fc4e2ef6470d43e16eb
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29314
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia669b25683c138d96be00db90d01cf406db4c2eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29404
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In commit 41baf0c3ff (soc/amd/stoneyridge: Remove dev_find_slot where
possible), the register being read was changed accidentally from
HT_DEV (Device 18h, Func 0) to NB_DEV (Device 18h, Func 5)
This doesn't return the correct value, and causes Grunt to reboot.
BUG=b:118721473
TEST=Boot grunt
Change-Id: I7b73358a074dd27639aafead7c8b39f0fad5685f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The function domain_read_resources() didn't have any code to actually
reserve any resources - it was just creating an empty resource entry.
I looked at fixing it to actually reserve the space, but the values in
the registers at the point when this runs aren't the final values that
we want to reserve anyway, they're temp values with a range much larger
than we want to reserve.
I next looked at moving the amd_initcpuio() function earlier so that we
could get the correct values for the registers, but even that doesn't
give us what we really want.
Ultimately removing this whole function seems to be the right thing.
BUG=None
TEST=Verify that the only resource that changes is the empty resource:
PCI: 00:18.0 resource base 0 size 0 align 0 gran 0 limit 0 flags 1 index 1080
Change-Id: I83bd3ea8db141416632c12fc883386070363f2f1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
The speakers start up muted, and the EC must be told by the BIOS
to unmute it. This helps prevent popping noises on boot/resume.
Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI devices for the basic SuperIO functionality provided by the EC
for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART.
The specific defines to enable these devices should be declared by the
mainboard before including this ASL, the same as the Chrome EC behavior.
Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add methods to handle ACPI EC events at runtime. Currently only
some common events are handled like lid switch and battery info,
and the event status is printed for debug on other events.
Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the expected objects (_BST, _BIF, _BIX) for reading battery
information and status from the embedded controller, and the
expected objects for reporting AC power status.
The battery was tested by booting with a battery attached and checking
that it is present in /sys/class/power_supply/BAT0 and that the values
are consistent and within expected ranges.
The AC device was tested by checking the AC status in sysfs when AC
is inserted or removed while the system is running.
Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the base ACPI support for the Wilco embedded controller, using
ASL 2.0 syntax throughout.
This includes the EC device and its resources, as well as the layout
for the EC RAM and the functions needed to read and write to the EC RAM.
The EC RAM address space is typically read/write, and so the ACPI EC
device expects that a defined Field can be read and/or written. With
this EC the read and write address spaces are different. For example,
a read from address zero will return data that is unrelated to what a
write to address zero expects.
This makes using a typical OperationRegion to describe the EC RAM
address space somewhat impracticle, since field definitions would
overlap. Instead, methods are provided for reading and writing to an
EC RAM offset, and the EC RAM layout is defined as a Package that
describes offset+mask for read or write fields within the EC RAM.
Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a function for use in bootblock stage that performs early init
of the EC, in particular setting it up for UART passthrough so a
legacy serial port can be used by the host.
This needs to be called by the mainboard that intends to use it
in bootblock in order for the UART to be available in later stages.
Some of the PNP style programming may look odd, but it is following
the EC specification which is not entirely standard. This code has
been tested on a board with this EC and it is functional.
Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Send a command to the EC on the way into S3 suspend state telling
it to save the PS/2 data, and on resume send it a command for
restoring the PS/2 data that was previously saved.
Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29120
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC handlers for specific SMM actions:
- on entry to sleep state tell the EC to save state and to prepare for
the host to enter sleep
- on ACPI enable/disable send command to the EC
- add a function to print SMI reasons when eSPI SMI is received
These need to be called by the mainboard handlers which will be done
when a board is added that uses this EC.
Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29119
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC expects to receive updates about the BIOS boot progress. This is
used for the EC logging to track system boot completeness. If the EC is
not informed about BIOS progress it will turn the system off 30 seconds
after the boot starts.
Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29118
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a chip_operations structure for Wilco EC and hook it into the device
tree so it can be initialized at boot.
Reserve the device resources specified in Kconfig, which will also
create the device IO windows if they have not been created in bootblock.
If the IO windows already exist (becauase they were specified in the
mainboard devicetree.cb) then this will find the existing entry instead.
During device init stage prepare the keyboard for use, which is required
for it to be functional in firmware and OS with this EC. Also send a
command to the EC telling it to pass the power button through to the
host for processing.
Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC mailbox commands that are related to the power and state of the
system. These commands include:
- read the power status registers from the EC
- read & clear the power status registers
- helper function to read the current lid state
- tell the EC why the host is about to power off
- tell the EC that the host is about to enter a sleep state
Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add basic supported mailbox commands for this embedded contrlller,
and define some command functions to retrieve and print information
about the EC.
Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29115
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add helper functions that make it more convenient to send and receive
the most common types of commands to the Wilco embedded controller.
Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29114
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Google "Wilco" Embedded Controller is a new embedded controller that
will be used in some future devices. The mailbox interface is simliar
to the existing Chromium EC protocol version 3, but not close enough
that it was convenient to re-use the full Chrome EC driver.
This commit adds the basic mailbox interface for ramstage which will be
used by future commits to send varous mailbox commands during the boot
process. The IO base addresses for the mailbox interface are defined in
Kconfig so they can be changed by the mainboard if needed.
Change-Id: I8520dadfa982c9d14357cf2aa644e255cef425c2
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Confirm with RK, H9CCNNNBKTMLBR-NTD uses this sdram config.
sdram-lpddr3-hynix-4GB.inc
BUG=b:117967129
BRANCH=master
TEST=None
Change-Id: I98afc33fd2cb61343be0dcdc007add75bee9c2af
Signed-off-by: Loop_Wu <Loop_Wu@asus.com>
Reviewed-on: https://review.coreboot.org/29366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Move soft_reset() to `southbridge/amd/common/` it's only used for
amdfam10 now.
Drop hard_reset() for good.
Change-Id: Ifdc5791160653c5578007f6c1b96015efe2b3e1e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new function which can hash a given region device and extend a PCR
in the TPM with the result. The needed SHA algorithms are included from
3rdparty/vboot and thus not duplicated in the coreboot tree.
For now VB2_LIB is not usable in postcar stage. Follow-up commits will
add the ability to use the lib in postcar as well. Once this feature is
ready, the library will be included in postcar stage to make this
function available in every stage.
Change-Id: I126cc3500fd039d63743db78002a04d201ab18aa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/29234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
When used more widely across the tree, we don't want to have
to worry if all its users are on the same architecture
(eg. aarch32 vs aarch64), so just build their own library for
each stage.
Change-Id: Ib6807ff73c2713f3b23f43055325b2c40ff1a17d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
GLK FSP 2.0.6.0 has properly determined MR1 value during InitializeJedec.
Revert the w/a code "odt_config |= nWR_24" in coreboot.
BUG=b:118422998
CQ-DEPEND=CL:*703187
TEST=Verified booting to kernel.
Change-Id: I6dd3c14b2048259a5518e1f72ff1061b9c5c7dfe
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
According to syndra thermal table, PL2 need to check cpu id.
Set up syndra PL2 value.
1. KBL_U PL2 is 25w.
2. KBL_R PL2 is 29w.
Refer to b:116836990#comment10.
BUG=b:116836990
TEST=The thermal team verify OK
Change-Id: I766a886121a089683565608252b4c176c70e88a3
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
BUG=b:112110028
BRANCH=none
TEST=boot into recovery
in ec console:
kblog on
(type on keyboard)
kblog
make sure buffer is not empty
Change-Id: I6525c2a46eef835dc64682466364a5b8fbb35226
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: Ic9022a98878a2fcc85868a64aa9c2ca3eb2e2c4e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29177
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7e8de35dcdad52bb311b34bfa9b272d17ed3186b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29243
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of forcing the IOMMU to be enabled, change it to only be enabled
if the device is enabled in devicetree.
BUG=b:118612241
TEST=Verify that IOMMU is disabled.
Change-Id: I6cfd6c81f47de23c54a49ec7cf87b219215ced5e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
Unfortunately Stoney has an issue where enabling the IOMMU causes
a 10%-50% decrease in the integrated graphics performance. It is
also disabled by default on other stoney platforms.
BUG=b:118612241
TEST=Verify that IOMMU is disabled.
Change-Id: Ia396c7227cb21461ec8afbdf746721d4fb28083d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29342
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The procedure dev_find_slot has 3 main uses. To find configuration
(devicetree), to verify if a particular device is enabled at build \
time, and to get the address for PCI access while in bootblock/romstage.
The third use can be hidden by using macros defined in pci_devs.h,
making it very clear what PCI device is being accessed. replace the
temporary pointers to device used with PCI access with SOC_XXX_DEV where
XXX is the device being accessed, and remove the setting of the temporary
pointers.
BUG=b:117917136
TEST=Build grunt.
Change-Id: Ic38ea04bfcc1ccaa12937b19e9442a26d869ef11
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This mainboard is based on mc_apl1. In a first step, it concerns a copy
of mc_apl1 directory with minimum changes. Special adaptations for
mc_apl3 mainboard will follow in separate commits.
Change-Id: I963ec63bccf71296c3fdabfcf9f3009c2febc791
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/29353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Extend the SPI interface to enable write-protection.
Tested on Cavium EVB CN81xx using W25Q128.
Change-Id: Ie3765b013855538eca37bc7800d3f9d5d09b8402
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: Ia97ddcd5471f8e5db50f57b67a766f08a08180b1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/29349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add dot/period to the end of sentences
2. Remove blank line at the end of the file
3. Break lines after 75 characters
4. Use RISC-V spelling
5. Add comma for clarity
Change-Id: Icbe803dfbe92ca7850204a1a9f7175befe9c8bcf
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/28654
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Just disable the timer interrupt and notify supervisor.
To receive another timer interrupt just set timecmp and
enable machine mode timer interrupt again.
TEST=Run linux on sifive unleashed
Change-Id: I5d693f872bd492c9d0017b514882a4cebd5ccadd
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/29340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Pointer to opcode increases by unit uint16_t not byte.
Change-Id: I2986ca5402ad86d80e0eb955478bfbdc5d50e1f5
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/29339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Return correct memory location for cbmem instead of incorrectly returning memory size.
Change-Id: If7f490a46edebb04c2280bf317d1adacef08f30d
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/29197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xiang Wang <wxjstz@126.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Now that bounce buffers are gone, and we can elide the selfload checking
code at build time, it is safe to add selfboot to the romstage.
Make it so.
This required a few other tweaks to rules.h and selfboot.c
to make it buildon ARM.
Change-Id: Ib6540921ad7cd7d58bfeab881d3978325b303cc2
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/29338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A stack overrun has been observed on AMD64 CPUs during the SMM module
relocation process. Change the assumed required size from equaling the
save structure's size to a Kconfig symbol.
A value of 0x400 doubles the size used by AMD64 systems and maintains
the size used by EM64T.
BUG=b:118420852
TEST=S3 on Grunt and verify 0x2f000-0x30000 uncorrupted
Change-Id: Ib1d590ee4afb06ca649afd6ad253cdfd969ae777
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/29277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Variants of Nami need to accommodate single channel DDR. Will use
GPP_D10 on nami for identification. GPP_D10 will return 1 when device
is using single channel DDR and 0 when using dual channel DDR.
BUG=b:117194353
BRANCH=None
TEST=dmidecode | grep Channel and make sure that the correct number of
channels gets returned.
Change-Id: If86ab2c5404c4e818ce496ea935227ab5e51730a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
port is allocated in ACPI, without checking for value.
Don't use port value when zero.
BUG=N/A
TEST=Portwell PQ-M107
Change-Id: Ia44281b82d003b29bffbf985b774ddd661b65c4e
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/29331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
