| Age | Commit message (Collapse) | Author |
|---|
|
Tested on T60 with intel graphics.
Change-Id: Id74d0a1315749052e7313135242e6b64862aa5e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5345
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I207fa981370d72c26e6fb1f07f3cd2d1f9d44d04
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11855
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Only one value would work with corresponding gma code currently (which one
depends on board). Going forward, it's possible to compute which number can
be used, so there is no need to keep this info around.
Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11862
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Based on the info by Felix Held.
Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11857
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iff1864982f2f3337c33e56976a0d4eb36f171e66
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11854
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I036c2c300b2aac38b2c30ab86623c9c46b3c5c98
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11850
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
MBA has eDP and not LVDS, so it's not supported by our native init.
Change-Id: I489b7a98163b648f0e8000202117593c6b1aaf31
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11842
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
MBA has a soldered RAM without SPD, so you need to use stored SPD.
Change-Id: I0205e6c65ccbfe7764c12c815e60801a3c3623a5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11841
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Just ran autoport on the data from MacBookAir4,2
Change-Id: Iba2a56a6846d81d29e6b090a9a31253ce240914d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11840
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I7695e797b4924d371efc6c7b5c972ea4fdb0ba2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/11863
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Make sure edge write test results are sane.
Check rn.all to make sure rn.start and rn.end are valid.
Most likely the following test is going to fail on the same
rank anyway.
Change-Id: Ifa601406e6c74ceb8d70063be5ce1bf6bc512c18
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11247
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Don't disable PEG bits while turning on IGD.
Fixes PCI device enumeration of PEG devices.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
Sidenote: This should be taken from a CMOS option instead.
Change-Id: I2d6522504e4404f2d57f9c319351d08317aefdcb
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11058
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Activate PEG clock-gating only if all PEG devices are disabled.
Fixes system hang when trying to access PEG registers.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
Change-Id: I7d62fbb83c16741965639cea1a0e4978d4e3d6da
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11059
Tested-by: build bot (Jenkins)
|
|
Currently cbfstool would reject non-alpanumeric characters in
image names. Underscore is not alphanumeric and is used in some
default fmaps. This change allows image names to contain all
"printable" characters except spaces.
Change-Id: I6ba2b581d5623f5b028149ece0169892ea63fd04
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: http://review.coreboot.org/11807
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since we now have more freedom in the bootblock linking step it no
longer makes sense to use a monolithic bootblock.S. Code segments must
still be included as the order in bootblock.S determines code flow.
However, non-code flow related assembly stubs don't need to be directly
included in bootblock.S
Change-Id: I08e86e92d82bd2138194ed42652f268b0764aa54
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11792
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The code flow doesn't fall through to walkcbfs, as it does in the rest
of bootblock.S. Instead, walkcbfs is called (albeit via a jmp). The
linker cannot know this when walkcbfs.S is included directly.
When we use a CAR bootblock, we lose several hundred bytes because
walkcbfs is not garbage-collected, yet it isn't used. This problem
is solved by assembling walkcbfs.S separately, and linking it.
Change-Id: Ib3a976db09b9ff270b7677cb4f9db80b0b025e22
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11785
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As part of preparing for systems with non-memory-mapped media, we want
to be able to call into C code. This change allows us to link C code
directly into the bootblock. The steps of going from bootblock main()
to CAR setup to C code will be implemented in subsequent patches.
Note that a few files selected with bootblock-y will now be compiled
for the bootblock as well, but since we enabled garbage collection,
they will not be included in the final binary.
Change-Id: I5ca6dcaf176f5469c6a3bb925859399123493bc6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11783
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The only difference between the ifeq/else/endif guarded rules is the
linker flags specific to x86. Add those flags to LDFLAGS_bootblock,
and only use one rule for bootblock.debug.
Change-Id: I986a93e0418f05fb273512d7efe0573052493332
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11782
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The macro is defined in `util/cbmem/cbmem.c` too, so do the same here,
so that searching for that macro name shows all the usages.
Change-Id: I52e9fa414fbbe2012bc6d00312db528efba3e564
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11803
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Commit 47818b4d6017b89e398cfbc86e3c437e0f81cfdf
(fsp/cache_as_ram.inc and boards: Fix incorrect usage of POST_IO)
breaks the logic which decides whether FSP
could be found or not in cache_as_ram.inc.
Fix the error by inverting the logic of the test.
TEST=Bootet mc_tcu3 board
Change-Id: I993d3422ac406d204a53e4dc890210fb9a52469d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11806
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Now that cbfs is adding more metadata in the cbfs file
header one needs to access that metadata. Therefore,
add struct cbfsf which tracks the metadata and data
of the file separately. Note that stage and payload
metadata specific to itself is still contained within
the 'data' portion of a cbfs file. Update the cbfs
API to use struct cbfsf. Additionally, remove struct
cbfsd as there's nothing else associated with a cbfs
region aside from offset and size which tracked
by a region_device (thanks, CBFS_ALIGNMENT!).
BUG=None
BRANCH=None
TEST=Built and booted through end of ramstage on qemu armv7.
Built and booted glados using Chrome OS.
Change-Id: I05486c6cf6cfcafa5c64b36324833b2374f763c2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The x86 bootblock linking is a mess. The bootblock is treated in
a very special manner, and never received the update to link-time
garbage collection.
On newer x86 platforms, the boot media is no longer memory-mapped.
That means we need to do a lot more setup in the bootblock. ROMCC is
unsuitable for this task, and walkcbfs only works on memory-mapped
CBFS. We need to revise the x86 bootflow for this new case.
The approach this patch series takes is to perform CAR setup in the
bootblock, and load the following stage (either romstage or verstage)
from the boot media. This approach is not new, but has been done on
our ARM ports for years.
Since we will be adding .c files to the bootblock, it is prudent to
use link-time garbage collection. This is also consistent to how we
do things on other architectures. Unification FTW!
Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11781
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Up to now, the multi-CBFS code path merely looked up files in the "boot
ro" image (ie. the default), disregarding the specified fmap region to
use for CBFS.
The code still relies on the master header being around, which on the
upside allows it to skip an offset at the beginning of the region (eg.
for ARM bootblocks).
This will change later (both the reliance on the master header and the
presence of the bootblock like this).
Change-Id: Ib2fc03eac8add59fc90b4e601f6dfa488257b326
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
POST_IO is a user-visible config bool. fsp_1_0/cache_as_ram.inc made a
mess of it, by forcing a build-time error when CONFIG_POST_IO was not
being set. fsp 1.0 boards ended 'select'ing this in their Kconfig.
Refactor fsp/cache_as_ram.inc handling of POST codes, and remove the
"select POST_IO" from boards that have it. Instead of implementing an
ad-hoc changing post code display and a delay based on port 0xed, just
encode the FSP failure code in the POST code. Since FSP failure codes
are > 16, we can encode the failure code in the lower nibble, and theirfailing function in the upper nibble.
Change-Id: Iaa3e6533e8406b16ec0689abd704984d79293952
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8485
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
There is no other guard to prevent this from being picked up when
building for other architectures.
Change-Id: I2039a289a4dd9970d5dd0f90d43d5d5c2a6d0a0b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11795
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The binutils-2.25 has added some new line, making the hunk
move downward a little. The utility patch can fix the offset
with "fuzz" message. So, recreate the patch to avoid that
message.
Change-Id: Ie659a8faf923465f6d47f7c0c0bf903c5eb903ab
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11639
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Clang is the default compiler on BSD and OS X. With this
change, we don't have to install gcc any more. Clang can
act as host cc.
This is a known issue on GNU mail list. Please refer
the link below.
https://sourceware.org/bugzilla/show_bug.cgi?id=17473
Change-Id: I0f014b776e86e6d0cbebd560cb17f469f31e1dfb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11638
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Grep the output of wget, showing only the percentage.
Leave the final "100%" unerased.
Checking return code of wget is removed.
Change-Id: I4559e88d541738a594dce92e23589992f234cb9b
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The error-prone interface of cbfs_get_file_content() led to another
possible NULL dereferencing. So check for CBFS_DEFAULT_MEDIA here
like the other functions do.
Change-Id: Ib8732160d389e9ecceb44f28be0e7de9a1d66e04
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11796
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Building an image for the Lenovo X201 with native graphics
initialization selected fails due to the changes introduced by commit
a3b898aa (edid: Clean-up the edid struct).
Same as in 11738 / 11585 / 11491
Change-Id: I4233a4ce2f5423c7ebdad68e8059cd34ac61cfaa
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/11787
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Users of DRIVERS_UART_8250MEM_32 would have to also select
DRIVERS_UART_8250MEM to avoid missing Kconfig dependencies. Instead,
do what the OXPCIE driver dies and select the appropriate options.
Change-Id: I40d93df024fcb3a9ad6dc51d6a5966e7b1b6c07f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11786
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
mohonpeak is the reference board for Rangeley. I doubt anyone uses it
or cares about it. We jokingly refer to it as "Moron Peak". It's code
with no known users, so we shouldn't be hauling it around for the
eventuality that someone might use it in the future.
Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11790
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
We already have two other code paths for this silicon. Maintaining the
FSP path as well doesn't make much sense. There was only one board to
use this code, and it's a reference board that I doubt anyone still
owns or uses.
Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11789
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
This is a sad story. We have three different code paths for
sandybridge and ivybridge: proper native path, google MRC path, and,
everyone's favorite: Intel FSP path. For the purpose of this patch,
the FSP path lives in its own little world, and doesn't concern us.
Since MRC was first, when native files and variables were added, they
were suffixed with "_native" to separate them from the existing code.
This can cause confusion, as the suffix might make the native files
seem parasitical.
This has been bothering me for many months. MRC should be the
parasitical path, especially since we fully support native init, and
it works more reliably, on a wider range of hardware. There have been
a few board ports that never made it to coreboot.org because MRC would
hang.
gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so
the effort was abandoned at first. Once the native path became
available, the effort was restarted and the board is now supported.
In honor of the hackers and pioneers who made the native code
possible, rename things so that their effort is the first class
citizen.
Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11788
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
Change-Id: I2e10ccac3248717d90838ca721cc691de792b507
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11780
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
When adding an FSP blob relocate it to its final
destination. This allows FSP to not be hard coded in
the cbfs. In order for the include paths to work
correctly w/ the edk 2 headers we need to supply
a neutered ProcessorBind.h to match up with the
tool environment such that one can get the UEFI
Platform Initialization type definitions.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados and booted. Also added FSP with -b and manually
adjusted location in fsp cache-as-ram. Booted as well.
Change-Id: I830d93578fdf745a51195109cf18d94a83ee8cd3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11778
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Certain chipsets provide their own main symbol for verstage.
Therefore, it's necessary to know this so that those chipsets
can leverage the common verstage flow.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan using this option.
Change-Id: If80784aa47b27f0ad286babcf0f42ce198b929e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11777
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Though the tegra124 SoC makes their faster cpus come up
in verstage it can still use the common flow. Therefore,
use the common verstage API for performing thenecessary
steps to initialize the caches on the faster cores.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built nyan.
Change-Id: I93023ec92a9de111db688742b057b5c64143f0b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11776
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The file was not referenced or used. Kill it.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=None
Change-Id: I30285d523ef3ca4dd3ce38b53aeb42862d929c90
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11775
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For shared compilation units between coreboot proper
and cbfstool that means one needs to provide printk
logging. Therefore, provide printk() at <console/console.h>
to mimic coreboot's environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool with code that includes and uses
<console/console.h>.
Change-Id: I8e54d403526a397e4fd117738a367a0a7bb71637
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There are compiler settings and interactions with other
header files that should be handled. First use __typeof__
instead of typeof because 'std' modes don't accept typeof.
The __typeof__ variant works equally well on clang. The
other change is to guard the helper macros so as not to
trigger redefinition errors.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built cbfstool including commonlib/helpers.h
Change-Id: I58890477cb17df14a9fa8b7af752a7c70769cf36
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11773
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to support FSP 1.1 relocation within cbfstool
the relocation code needs to be moved into commonlib.
To that end, move it. The FSP 1.1 relocation code binds
to edk2 UEFI 2.4 types unconditionally which is separate
from the FSP's version binding.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Ib2627d02af99092875ff885f7cb048f70ea73856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11772
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that the commonlib/endian.h routines have landed utilize
those in the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: If431d64fd2843bea864d971ca1ea06b07c0d6435
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11771
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Older gcc versions throws a warning when a struct or union is
declared without a valid name (anonymous). This patch enables the
feature for older gcc versions so that no warning will be issued.
Change-Id: Idc5481f4d5723c5090a6f7d7dbb0686a737e11fc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove dummy data from hwinfo.hex as it is not needed
anymore in the system.
Change-Id: I4f328a4ef61741039eb2c030e23fea33f539c2bb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11763
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Since microcode was moved to 3rdparty/blobs, we need to select
USE_BLOBS in Kconfig to get the submodule 3rdparty/blobs automaticaly.
Change-Id: I25e574fd90b830448cacccd16d01a5a2dbc8517d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11764
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
I missed these Makefile.inc changes. As verstage.c was removed
remove the references within the Makefile.incs.
Change-Id: I5d38c0a87d057622a3706bf3bde1142944c3b17c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11759
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
They allow optimizing a verification of a whole CBFS image by only
dealing with the headers (assuming you choose to trust the hash
algorithm(s)).
The format allows for multiple hashes for a single file, and cbfstool
can handle them, but right now it can't generate such headers.
Loosely based on Sol's work in http://review.coreboot.org/#/c/10147/,
but using the compatible file attribute format. vboot is now a hard
dependency of the build process, but we import it into the tree for
quite a while now.
Change-Id: I9f14f30537d676ce209ad612e7327c6f4810b313
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11767
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I1c5e3424cb56f1f10e75bb07db084c3500f3ba07
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11768
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We need to emit some hex strings.
Change-Id: I9e7e184282f6ad0470f2e269f5dc874e78f8b697
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11766
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since fsp_baytrail was refactored to use microcode.bin
in 3rdparty/blobs, we do not need MICROCODE_INCLUDE_PATH any more.
Change-Id: I4382b0c174877186bd37fbff21f3269136d15e10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11762
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Building an image for the Lenovo X200 with native graphics
initialization selected fails due to the changes introduced
by commit a3b898aa (edid: Clean-up the edid struct).
Change-Id: Ifd36571c9c00761b4a2a6deb3c9c4a52d9d13e25
Signed-off-by: Audrey Pearson <apearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11738
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Building coreboot with the SeaBIOS or FILO payload selected, their config and
revision are added to CBFS.
```
Creating out/bios.bin.elf
CBFS coreboot.rom
PAYLOAD payloads/external/SeaBIOS/seabios/out/bios.bin.elf (compression: LZMA)
CONFIG .config
REVISION build.h
CONFIG payloads/external/SeaBIOS/seabios/.config
REVISION payloads/external/SeaBIOS/seabios/out/version.c
CBFSPRINT coreboot.rom
```
Align the path of the payload config by removing one space.
Change-Id: Icbb139c28b9dcb8d31989a48fa4fbe4a9b088972
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11710
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
vboot_handoff_flag was duplicating the logic to grab the handoff info, that is
already made available with vboot_get_handoff_info.
This uses vboot_get_handoff_info in vboot_handoff_flag instead.
Change-Id: I28f1decce98f988f90c446a3a0dbe7409d714527
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11498
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Inspired by the Sage source code (itself from coreboot).
Change-Id: I4864923166efb200882d895c572d1ee060c71951
Signed-off-by: Maxime de Roucy <maxime.deroucy@gmail.com>
Reviewed-on: http://review.coreboot.org/11730
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iecefdd1e827e4eb8b4da573e4291850d6c47767f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11754
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The thermal sensor interface exposed in function 3 of the northbridge is
a more convenient and faster way to access the processor-internal
thermal sensor than using the SMBus/SB-TSI interface from the FCH, see
the Family14 BKDG: "Tctl is a processor temperature control value used
for processor thermal management. Tctl is accessible through SB-TSI and
D18F3xA4[CurTmp]. Tctl is a temperature on its own scale aligned to the
processors cooling requirements"
Also on at least some of these boards the existing thermal zone is
broken and always returns 40C (the default value if the SMBus read
failed) because the SMBus muxing register (SmBus0Sel) is not set up
correctly.
Case in point: The fallback "smbus read failed" temperature is 40 C and
the the logs taken from the board status repository for the Asrock
E350M1 board all show: "ACPI: Thermal Zone [TZ00] (40 C)"
e.g.
http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-5054-gf584218/2013-12-20T20:56:20Z/kernel_log.txt#l390
and
http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-7030-g6d7de4f/2014-10-16T15:34:19Z/kernel_console.txt#l404
and
http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-9989-gf2dfef0/2015-06-13T00:22:49Z/kernel_log.txt#l425
Example lm-sensors output with this patch on the pcengines APU1, on
Linux 4.1.0-rc8+ (wiht both CONFIG_ACPI_THERMAL and
CONFIG_SENSORS_K10TEMP enabled):
acpitz-virtual-0
Adapter: Virtual device
temp1: +54.0 C (crit = +100.0 C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +54.0 C (high = +70.0 C)
(crit = +100.0 C, hyst = +97.0 C)
Change-Id: Id9c5b783ba424246816677099ec6651814e59f21
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: http://review.coreboot.org/10940
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add some missing devices to device tree and header.
Remove the obsolete devices.
Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11378
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
To catch dependency errors in symbol.c (such as the ones
fixed by I51b4ee326f082c6a656a813ee5772e9c34f5c343) we need
to check for global kconfig warnings before saving config
files.
This patch will produce errors for wrong dependencies and
add catching of errors to conf, nconf and mconf. Sorry,
gconf users, you will have to wait.
Change-Id: Idf7ee406ce3869941af319219aea16fab826df84
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11291
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The vboot verification in a stage proper is unified
replacing duplicate code in the tegra SoC code. The
original verstage.c file is renamed to reflect its
real purpose. The support for a single verstage flow
is added to the vboot2 directory proper.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I14593e1fc69a1654fa27b512eb4b612395b94ce5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Using a copiler to compile something that's already a binary is pretty
stupid. Now that Stefan converted most microcode in blobs to a plain
binary, use the binary version.
Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11607
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id2063fb29226dcb55fe84f680b7b9cb10313ef2b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11753
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
In order to do a verification of romstage on x86 one needs to
run verstage which verifies romstage (and the memory init code).
However, x86 doesn't have SRAM like every other modern SoC so
managing the cache-as-ram region is especially critical.
First move all of the "shared" objects to the beginning of
the .car.data section. This change then ensures that each stage
using car.ld to link has the same consistent view of the addresses
of these fixed-sized objects in cache-as-ram. The CAR_GLOBALs can
be unique per stage. However, these variables are expected to have
a value of zero at the start of each stage. In order to allow a
stage to provide those semantics outside of the initial cache-as-arm
setup routine add _car_global_start and _car_global_end symbols.
Those symbols can be used to clear the CAR_GLOBALs for that stage.
Note that the timestamp region can't be moved out similarly to the
pre-ram cbmem console because the object storage of the timestamp
cache is used *after* cache-as-ram is torn down to indicate if the
cache should be used or not. Therefore, that timestamp needs to
migrated to ram. A logic change in src/lib/timestamp.c could
alleviate this requirement, but that task wasn't tackled in this
patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I15e9f6b0c632ee5a2369da0709535d6cb0d94f61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to support verstage on x86 one needs to link verstage
like romstage since it needs all the cache-as-ram goodies. Therefore,
provide a macro that one can invoke that provides the necessary
recipes for linking that particular stage in such an environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I12f4872df09fff6715829de68fc374e230350c2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11739
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This moves a few vboot-prefixed functions that were defined in chromeos.c to
vboot_common.c, since those are only relevant to vboot and depend on the vboot
handoff data. This allows more separation between CONFIG_CHROMEOS and what
CONFIG_CHROMEOS selects, so that each separate option (such as
CONFIG_VBOOT_VERIFY_FIRMWARE) can be enabled separately.
Thus, the actual definitions of these functions will only be declared when
CONFIG_VBOOT_VERIFY_FIRMWARE is set, so the check before calling
vboot_skip_display_init in bootmode was also adapted.
Change-Id: I52f8a408645566dac0a2100e819c8ed5d3d88ea5
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11497
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Avoid specifying the size of the microcode in microcode_size.h.
Instead, the size will be determined during build time and
microcode_size.h will be generated. This way, the size does
not need to be adjusted by hand.
Change-Id: I868f02b0cc03af12464a6a87c59761c200eb2502
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11709
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Use the common ME and descriptor code.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados
Change-Id: I7196f587b92fd26129b30e2cd73f4caf5f4ebef8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11735
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of selecting the Kconfig option and adding the subdir
entry within each chipset auto include the common/firmware
directory as it's guarded by HAVE_INTEL_FIRMWARE.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados.
Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11734
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I2071586e1f3b4464464928c11475f9283084dbcd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11693
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The output of command below,
# i386-elf-nm build/cbfs/fallback/romstage_null.offenders | \
grep -q "" ; echo $?
has different result on MacOS, OS X Mavericks, which outputs 0.
On linux, it outputs 1.
I assume it is misleading to search an empty string in a empty
string. Change it to testing if the string is empty.
Change-Id: Ie4b8fe1fb26df092e2985937251a49feadc61eb0
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11600
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
1. The build folders are capitalized.
2. Add folders for build LLVM and IASL.
Change-Id: I6c752f08aa545d8878fddd373e5acbfade317ad5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11602
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Up to now, if both fmap and a master header existed, the master header
was used. Now, use the master header only if no fmap is found.
Change-Id: Iafbf2c9dc325597e23a9780b495549b5d912e9ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11629
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On x86, the bootblock can (and will) become part of the regular file
system, so there's no distinct fixed-size region for the bootblock
there.
Change-Id: Ie139215b73e01027bc0586701361e9a0afa9150e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This fixes building with CONFIG_COVERAGE=y
Change-Id: I5128ae0ef0d4f71e3ede7bcb3ee7ed7e265d1bb7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11729
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There appears to be an issue that is causing this particular bit of
ACPI code to be incorrectly interpreted by the kernel and the IASL
disassembler.
Ensuring the PCRB() method is defined in the DSDT before any uses of
it appears to fix the problem, but that relies on specific ordering
of the ASL files included by pch.asl and may break again in the future
if the includes were re-ordered. (they are alphabetic now)
So in this case to work around the issue unroll the function call so
the admittedly messy calculation is reduced to a constant when compiled.
Note this issue was observed with both iasl-20130117 and
iasl-20150717.
ACPICA bug: https://bugs.acpica.org/show_bug.cgi?id=1201
BUG=chrome-os-partner:45760
BRANCH=none
TEST=verify disassembled AML is correct
Change-Id: I7b6a3b792f79755db0ea7b9f2ef6ee7f5000e018
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ecacc340d6e1068ea649f0859657bb3208695730
Original-Change-Id: I232523f5b6ce290da6e7d99405a53b9437b10e0d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302167
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11721
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:41280
BRANCH=none
TEST=Audio jack insert/eject detection and headset buttons work
on glados with the nau8825 driver in chromeos-3.18 and the
staging kernel skl2.
Change-Id: I813a985b4a39249a2cdbe45117acbdb7710bfa29
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a5b3dafd407fea2376dff5c3dcde50dff4704fb
Original-Change-Id: Ic24a0c444761d0f3a35c268078e70d9aacca4c80
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293610
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11720
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the CTDP support code that is in ACPI. It has been ported
from haswell and while the MCHBAR register interface does seem to
still exist the calculations for determining PL2 is no longer
straightforward.
Additionally nothing is using this interface and the expectation
is that DPTF will be used for throttling with PL[1234] and having
ACPI interfere with the configuration would not be good.
BUG=chrome-os-partner:44622
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I81e356ddf564a5253458b82bc3327bfb573ab16d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 884ee9a764bad0b3b4bcaeb5a3f46c5f090a116c
Original-Change-Id: I284ab52a305cee25c88df5228b01ff1e9544efe3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302166
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the typo of _DDR to be _DDN.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build kunimitsu with iasl-20150717
Change-Id: I1e7c20d450ea897bfd24506d10a5f466b03610e4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f136581b653bfb63aac24065c8837307e3fc5432
Original-Change-Id: I3358e6d3d05bcfc291199e8ef12ff92c66f5b74f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302165
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11718
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the typo of _DDR to be _DDN.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I8d61a6653c3109890d04e54f0d694703b9c9f2bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d4a2b2583bdbf9afd7b306359338d4c49bbb44ad
Original-Change-Id: I7b7905a217d34a8a78b8280c898f1074ecbe3cf6
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302164
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11717
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Recent version of iasl are flagging more things as warnings.
Remove unused Local0 uses and make _CRS method serialized to
fix these warnings.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I1d4535205426dd9a6346f53ff159221cf5cd899a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8b43f8f24bb7cb33ad0411c24616da66663c2e3e
Original-Change-Id: I71eafd91d30d5f50e6211368f0bbc517c8085892
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302163
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since the TPM _CRS method creates named objects it needs
to be serialized to prevent a warning in recent iasl.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I59a52552ab24b7d9c9928331aa8c8d19f54fd1b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a5c474c94980661573a99eb94d5f661f2d0114b
Original-Change-Id: Ie9d164ea8781304dd0bf1833d182d7c601b8e18d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302162
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11715
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change allows files added to cbfs-files-y to specify compression
algorithm.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I29ba0c6f8290b500072a0b17460ee590d6bb6efa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4284160bdbbc54ed1da8b5477b02ee315061206b
Original-Change-Id: Idf81e1cc0a1030449da632f6d89cdc87c624f9f3
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302132
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11714
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=none
BRANCH=tot
TEST=built for Samus with debugging enabled
Change-Id: I0b555d018f8c2eb1b51519a6227298c8d5d58a42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5908e4b8ffc66e6ecc7cae78cf10055fbd727c81
Original-Change-Id: Ifd049111fee540789dabb1d7653568b80405b77d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302131
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11713
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to wake from S0ix the kernel needs to know that the
keyboard interrupt is wake capable. Using IRQNoFlags does not
allow the wake capability to be reported.
For normal S3 this does not matter as the EC is the one handling
the keyboard wake event. For S0ix the EC does not need to be
involved in this particular wake event.
BUG=chrome-os-partner:43079
BRANCH=none
TEST=echo freeze > /sys/power/state and wake from keyboard
Change-Id: I7175d2ea98f8a671765897de295df7b933151fc4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 645f1cd96c35f42aa7c40ff473b15feb619b0373
Original-Change-Id: Ia89c30c51be9db7b814b81261463d938885325fd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/301441
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11712
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
$(src) is not defined when building directly from the cbfs directory (that is,
when building cbfs as standalone, running make in the cbfs directory), so we
need to define the path to the commonlib include path relative to $(top).
Change-Id: I72e80b030d4a156ec653ded5ab1457b16f612526
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11706
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
While the romstage code flow is not consistent across all
mainboards/chipsets there is only one way of running ramstage
from romstage -- run_ramstage(). Move the
timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. TS_END_ROMSTAGE still present in
timestamp table.
Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This removes the dependency on chromeos and vboot for the sw write protect state
function: vboot_get_sw_write_protect, renamed to get_sw_write_protect_state to
both reflect this change and become consistent with the definition of
get_write_protect_state that is already in use.
Change-Id: I47ce31530a03f6749e0f370e5d868466318b3bb6
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When building for ChromeOS, it is expected that Coreboot will only occupy the
first MiB of the SPI flash, according to the veyron fmap description.
Otherwise, it makes sense to use the full ROM size.
Change-Id: I168386a5011222866654a496d8d054faff7a9406
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11117
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Unlike the other stages, the payload requires virtual memory to be set up
and also a privelege level change.
Change-Id: Ibbe2a55f7719d917f121a53a17c6d90e6b2ab3d1
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/11699
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Currently coreboot expects the loader to clear the bss section
for all stages. i.e. stages don't clear their own bss. On ARM
SoCs the BootROM would be responsible for this. To do that
one needs to include the bss section data (all zeros) in the
bootblock.bin file. This was previously being attempted by
keeping the .bss info in the .data section because objcopy
happened zero out non-file allocated data section data.
Instead go back to linking bootblock with the bss section
but mark the bss section as loadable allocatable data. That
way it will be included in the binary properly when objcopy
-O binary is emplyed. Also do the same for the data section
in the case of no non-zero object values are in the data
section.
Without this change the trick of including .bss in .data
was not working when there wasn't a non-zero value object
in the data section.
BUG=None
BRANCH=None
TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains
the cleared bss.
Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This commit adds read/write functions for both big and
little endian interpretations. Additionally there are
variants that allow an offset to be provided into the
source buffer.
BUG=None
TEST=Wrote test harness for functions. Also booted ARM QEMU
through end of payload.
Change-Id: If44c4d489f0dab86a73b73580c039e364c7e517d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11677
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
endian.h lives in under sys on the BSDs. Replace htole32() with
swab32(htonl(..)) as a proxy for little endian operations.
Change-Id: I84a88f6882b6c8f14fb089e4b629e916386afe4d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11695
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
|
|
Since fmap doesn't come with a checksum, we resort to a number of
heuristics to determine if a given location hosts an fmap (instead of
another data structure that happens to store the fmap magic string at
the right location).
The version test is particularly effective against strings containing
the magic (which either terminate with 0, or have some other ASCII data,
but rarely a '\001' byte inside the string).
Change-Id: Ic66eb0015c7ffdfe25e0054b7838445b8ba098e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11690
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The command adds a new cbfs file, fills in the CBFS meta data in cbfs
master header format, then points the master header pointer (which
resides at the last 4 bytes of the CBFS region) to the data area of the
new file.
This can leak some space in CBFS if an old-style CBFS with native master
header gets the treatment, because a new header is created and pointed
at. flashmap based images have no such header, and the attempt to create
a second file with the (hardcoded) name will fail.
Change-Id: I5bc7fbcb5962b35a95261f30f0c93008e760680d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11628
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is more in line with how fmd/fmap specify ranges.
Change-Id: Iecf8250e84d6eb267711ded446909b21147f1a9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Let's move x86 style bootblocks (and later the others) and the master header
into the CBFS structure. Prepare for this by adding file types.
Change-Id: I1b4149c7f3b8564ee358a2c18ba91e6a7a6797da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11627
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
cbfs_file_find_attr(file, tag) finds the first attribute of file with
the given tag.
Change-Id: I78ee3b996b4b086605244c5d7d57ef7e3fc1db47
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11678
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
