| Age | Commit message (Collapse) | Author |
|---|
|
Configure I2C high / low time in device tree to ensure I2C
CLK runs under I2C_SPEED_FAST (400 kHz).
Touchpad: 387.7kHz
Touchscreen: 389.4kHz
Audio: 387.6kHz
P-sensor: 372.5kHz
BaUG=b:178092096
BRANCH=dedede
TEST=Build and EE check after tuning I2C clock is under 400kHz
Change-Id: I4f6bdd3802cd94671325a89458cde981a2ffa929
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
google_chromeec_get_event returns an event number and 0 when there's no event.
This function is usually called in a loop until there are no more events, so
it makes sense to return 0 (i.e. no event) when there's an error.
BUG=b:184074997
TEST=Boot guybrush, no ec errors
Change-Id: I6c0186e4637af9ae24f45cce3638f0913227d6a7
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The GPIO_GSC_AP_INT itself is active low, but the payloads will
create the IRQ using its eint driver, which is active high.
BUG=b:188392736
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie39f3b9a5dbe15057ef3e96f6c99211949692003
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BUG=b:189985956
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Change-Id: I2b68f6342e7d46d90ea0e7aef9a01ecfd35f8fa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Any chip entry without a device node below them are silently dropped by
sconfig. Copy the same device node from the devicetree to prevent this.
Change-Id: I778f6b2d980e78142ae12ef941e7d9bd1f753057
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55540
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"corredsponding" --> "corresponding"
Change-Id: I0b0e5d461de29583c269896911167f8a44d84c2a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55555
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I7e37d32251fa3dcc64aec62dd2d814463c4a9999
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55580
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the default state of the MMIO UART devices in the chipset
devicetree is off, the mainboard devicetree entries that disable MMIO
UART devices are removed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I913a587802020ce4e182b48632cdde1104c2a6e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55545
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Defining the memory mapped base in fmap for example "FLASH@0xff800000
0x80000" for a 8M flash is optional in fmap files. This will also
reflect in the generated fmap_config.h. Fix the assembly cbfs walker
walkcbfs.S for fmap lacking a definition of the flash base.
Change-Id: I96b18f675e625abee503648ffdc6031978a4269a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Create the cappy variant of the waddledee reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:190515828
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_CAPPY
Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com>
Change-Id: Id5a3b0cb475ee77a9f62523d8322a5e4123ce3be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
devfn_disable() function is used to disable a device based on
given bus, device function number. This function checks if the
device is at enable state and disables the device.
Change-Id: Ia4a8bfec7fc95c729a5bb156f88e9aab3bf5dd41
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add camera support in devicetree.
BUG=b:190797339
BRANCH=None.
TEST=built pirika firmware and verified camera function is OK.
Change-Id: I66ded32105f3166e2faec3ea5dcfb93c29822366
Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55450
Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to meet timing requirement of WWAN reseting it in early GPIOs
and asserting Reset GPIO in ramstage
BUG=b:180166408
TEST=Build and boot Brya system and verify enumeration of L850 and FM350 devices
Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com>
Change-Id: Id6d69696b6c645eec3fa314a608c69214bafba82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54912
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pmc_set_power_failure_state() is usually called twice, once upon boot
(with `target_on == true`) and once from SMM when the system is shut
down (with `target_on == false`). Assuming settings didn't change
between these calls, there is only one case where we actually need
to write the register value: when updating the state for the
MAINBOARD_POWER_STATE_PREVIOUS feature.
This suits us well as we want to avoid unnecessary writes so we
don't clobber the value set upon boot from within SMM. Due to
inaccessible option backends, SMM might not know the current
option state.
The assumption above, that the option value didn't change, may not
be true if the user changed the option on purpose. In the future,
one would have to reboot the machine for option changes to take
effect. However, this doesn't seem to make a huge difference: One
already needed a controlled shutdown for the update to take effect
before. A reboot doesn't seem much more expensive.
Change-Id: I58dd74b8b073f4f07db090bf7fddb14b5df8239a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55539
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch create separate helper functions to fill-in required
FSP-M UPDs as per IP initialization categories.
This would help to increase the code readability and in future
meaningful addition of FSP-M UPDs is possible rather adding UPDs randomly.
TEST=FSP-M UPD dump shows no change without and with this code change.
Change-Id: I5f23292fd1bd44d0cd55fbefd490b090ccd48365
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55225
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix build failures in the case <vc/.../chromeos.h> is removed.
Change-Id: Ie45066f39cd6fb92cca697a6bd5bc8bb8c60b4e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This brings in three new commits that are mostly concerned about
fixing the build with gcc 11.
Change-Id: I35f9100e2bfb2a261b3a0a128697550caf5840d9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55498
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating the APOB takes a considerable amount of time. I decided to be
granular and split out the operations so we know when we read vs read +
erase + write.
BUG=b:179092979
TEST=Boot guybrush and dump timestamps
3:after RAM initialization 3,025,425 (44)
920:starting APOB read 3,025,430 (5)
921:starting APOB erase 3,025,478 (48)
922:starting APOB write 3,027,727 (2,249)
923:finished APOB 3,210,965 (183,238)
4:end of romstage 3,210,971 (6)
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I08e371873112e38f623f452af0eb946f5471c399
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Always clear vector 0 entry before optionally overwriting it
with the i8259 timer redirection.
Change-Id: Ia2e96f43e6494711f9fc4fd74229f5817b04b48d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55286
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I60ce17fd7640fab064a3d62d8d2b3703993c7b59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55309
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
APIC Serial Bus pins were removed with ICH5 already, so a choice
'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG
0x3 is also not documented since ICH5.
For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was
wrong and ignored as BOOT_CONFIG register emulation was never implemented.
For ICH4 and earlier, the choice to use FSB can be made based on the
installed CPU model but this is now just hardwired to match P4 CPUs of
aopen/dxplplusu.
For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined
and the only possible operation mode there is APIC Serial Bus, which
requires no configuration.
Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6deb2a4c632d39112dcce71f076742a1b62ee89b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This a mainly a preparation for adding the MMIO UART devices to the
chipset devicetree.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I533e4a909fdeb1614dbc5df015440b9df5d83233
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06102f4fcc3bf9de332c71a52c632241b95cde19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In acpi_soc_get_bert_region after the bert_errors_region call is was
checked if the region parameter is NULL after the call; since region is
a parameter of acpi_soc_get_bert_region, it's non-NULL. What we should
be checking here is if region points to a non-NULL pointer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reported-by: Coverity (CID:1457506)
Change-Id: I0523504d65725ab2d2df4db28a5dedd90697b917
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie97bd6ad076f0ce35fc997d954a003a1252184e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7edae2142120dec9e11ef823b561401b7e0bc208
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Even though the code is currently commented out, replace the magic
numbers with the existing defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0dbbadf71f2e5a4d23ee998e2aa0a8b67205845
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Factoring out those defines allows using them easily in the ACPI code
without having to use preprocessor macros.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9dfddb0d4f32a542fa652ff8c14e932c224f247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Replace the magic numbers with the existing defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d98ea8c5bb0e487c7eef0b0a1cdada9cb04df4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Factoring out those defines allows using them easily in the ACPI code
without having to use preprocessor macros.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I99cb03de8782a0eeeb505f567b982099b0e8a18d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:184978118
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I03554a151aa6a6d9e15d74c63cd02239b788808a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Lynx Point PCH ACPI reference code version 1.9.1 has two additional
magic steps, which were already present in Broadwell. Add them.
Change-Id: Ia8ca6dcfcfb4ed6b0d957d249b93640ef74670d7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The printed values are unsigned, and should be printed accordingly.
Change-Id: Ie5edce914c389c70460b1ed3390731e3568340dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The typedef needlessly hides the actual type of the variables.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I58a58cd402ec679960f460e80b37ff2afb8e3974
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This option is valid for Broadwell as well as Haswell.
Change-Id: I4f1e9663806bae279f6aca36f09a0c989c12e507
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Split up PCH Kconfig into a separate file. While we're at it, also sort
selected options alphabetically.
Tested with BUILD_TIMELESS=1, coreboot.rom for the Purism Librem 13 v1
remains identical when not adding the .config file in it.
Change-Id: Ic3ff982e7108bf2d25a22e56ac2fbb93070df164
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Lynxpont ---> LynxPoint
Change-Id: I5af67079ead389beeafd9172aa1b98980dacbd38
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The BMC EEPROM layout has been updated to contain system and mainboard
serial numbers. Use these values in SMBIOS Type 1 and Type 2 tables.
Change-Id: I55b51a856b4ad28fd56b02015b2e1d49cd629735
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55275
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These macros were used to generate ACPI P-state entries, but Broadwell
now uses Haswell CPU code. These macros are unused and can be removed.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: Ib2baca2964d9177e7ab6630d4ced22c5d332fb6e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Keep deduplicating code. Have Broadwell PCH ASL borrow some equivalent
Lynx Point ASL files, and drop the now-unused files from Broadwell PCH.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: If5a8712a846bbf7c42db92167763935dee74c26f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use hostbridge.asl from Haswell instead of Broadwell. Both files are
equivalent. Then, drop the now-unused hostbridge.asl from Broadwell.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I87d51727b75a9c59e2f5f3ba8d48c575ce93c78c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Include Haswell memmap.h from Broadwell iomap.h to deduplicate identical
definitions. This also prevents the definitions from falling out of sync
while the unification process is ongoing.
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical.
Change-Id: I850e5521effba3818f4e2a13b94281bf07857d50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move the inclusion of `pci_irqs.asl` into PCH scope in order to allow
deduplicating northbridge ACPI code.
Change-Id: I541913226b26662f3798ae9c25ab1ac33cf2ed45
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Taken from Haswell code. These resources also exist on Broadwell and
should be reported to the OS.
Change-Id: I45f2a6a9140d72c1cc2ee8b72621dc16c815b621
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
GDXCBAR and EDRAMBAR are accounted for when reporting resources to the
allocator, but they are not present in the DSDT. In addition, coreboot
does not enable either range, but MRC.bin sets up GDXCBAR and does not
disable it afterwards. Not reporting GDXCBAR in the DSDT can result in
resource conflicts, and not enabling EDRAMBAR can cause issues on CPUs
with eDRAM.
Enable both GDXCBAR and EDRAMBAR in coreboot code, and report these
ranges in the DSDT. This matches what Broadwell does. The value for
the `GDXC_BASE_ADDRESS` macro matches what MRC.bin programs as well.
Tested on Asrock B85M Pro4 with an i7-4770S (no eDRAM):
- Still boots
- EDRAMBAR is now enabled with base address of 0xfed80000
- GDXCBAR is still mapped with base address of 0xfed84000
Change-Id: I5538873b30e3d02053e4ba125528d32453ef6572
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add defines for the sizes of northbridge MMIO windows and use them where
applicable. The macro names have been taken from Broadwell.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I845cba8acbd478cd325d2e364138336d985f9c34
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Intel document 493770 (Haswell BIOS Writer's Guide) revision 1.8.0
recommends writing all ones to the IA32_MCi_CTL registers in order
to enable all MCA error reporting.
Change-Id: Ib5d2c759483026b5b4804c5a4b2b969d2269af22
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55463
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard information can be found in the included documentation.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ic811e24bd72da84e5ca8f5b09f2eb65872153b72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55111
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is only called locally.
Change-Id: Ie3eaf659a2868eee1d4688885495c413f94f42e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Add ddp (display controller) driver that supports overlay, read/write
DMA, etc. The output goes to display interface DP_INTF0 directly.
Add ddp gclast and output_clamp settings on mt8195 to support
multi-layer display.
BUG=b:189985956
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Change-Id: I9d5dd1025c4766218c2b1d86b9b1f97f2eab53d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55509
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1) FSP-S should not run XIP
2) Overriding the FSP-T location conflicts with the location set in
drivers/intel/fsp2_0
This fixes a regression caused by commit
0f068a600e (drivers/intel/fsp2_0: Fix the FSP-T position)
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/G6WRFITANOS2JEYG3GKB2ZNVCLUZ6W7P/
Change-Id: I381781c1de7c6dad32d66b295c927419dea7d8be
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
Reviewed-by: King Sumo <kingsumos@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Avoid using deprecated macros, where possible.
"GpioResetPwrGood" represents multiple valid updated values, depending
on the GPIO community and will be more difficult to update.
While Kabylake supports both sets of macros, it will cause build errors
on Coffeelake. In the GPD group, replace with "GpioDswReset."
Replace with "GpioResumeReset" in any GPP group.
Change-Id: Iab0bb09adad997bef3a2133c443471d4c634f423
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
One of the Memory32Fixed entries covers the TXT private and public
spaces, and another covers the TPM registers. Update the comments.
Change-Id: I261d74c113fabf1d152964efd8c91de85eba4179
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Move locking CPU MSRs during CPU init instead of using
CONFIG_PARALLEL_MP_AP_WORK functions.
The AES Lock enable bit caused CPU exception errors as this should not
run on HT siblings. The set_aesni_lock() function takes care of that.
Change-Id: I21598c3e9a153dce25a09b187ddf9cf6363039d3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55098
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable all display related UPDs if IGD is not enabled as FSP
don't need to perform display port initialization while IGD itself
is disabled else assign UPDs based on devicetree config.
TEST=Dump FSP-M display related UPDs with IGD enable and disable
to ensure patch integrity.
Change-Id: I0479904141dfc5e707679109aa18b7ef4264cf96
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions
combination with is_devfn_enabled().
2. Remove unused local variable of device structure type
(struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with
is_devfn_enabled() call.
TEST=Able to build and boot without any regression seen on ADL.
Change-Id: I92671992ec14fd2adca1635b0791ac8b456332e9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55292
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions
combination with is_devfn_enabled().
2. Remove unused local variable of device structure type (struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with is_devfn_enabled()
call.
TEST=Able to build and boot without any regression seen on EHL.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Iadf9145a11f27ff0e182f146b6fe5a01e6cf3ed8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions
combination with is_devfn_enabled().
2. Remove unused local variable of device structure type (struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with is_devfn_enabled()
call.
TEST=Able to build and boot without any regression seen on TGLRVP.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ic9d91b711bab83de1911e0b7ea876f2ad018c937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55330
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions
combination with is_devfn_enabled().
2. Remove unused local variable of device structure type (struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with is_devfn_enabled()
call.
TEST=Able to build and boot without any regression seen on dedede
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I4919a1ec02df50bc41fd66d5f3a352108a7aa04c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions
combination with is_devfn_enabled().
2. Remove unused local variable of device structure type (struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with is_devfn_enabled()
call.
TEST=Able to build and boot without any regression seen on CML.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ib5df5fd32e2e2742d349754a942bf81ca505dd39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions
combination with is_devfn_enabled().
2. Remove unused local variable of device structure type
(struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with
is_devfn_enabled() call.
TEST=Able to build and boot without any regression seen on Reef.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I900038dd4b2e2d89b1236bbd26bec5f34483b9f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Trigger mode LAPIC_INT_LEVELTRIG was only used with LAPIC_DM_INIT,
specifically for (obsolete) Init Level De-assert.
Level LAPIC_INT_ASSERT is required to be set for all other delivery
modes other than LAPIC_DM_INIT.
This reverts the two above changes that X2APIC mode support introduced
to the IPI for LAPIC_DM_SMI.
Change-Id: I7264f39143cc6edb7a9687d0bd763cb2703a8265
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Depending on how the "middle-end" (yes, the gcc developers are
serious about that) optimizer ends up mangling the code, there may
or may not be a complaint about x being used uninitialized when it's
clearly not used at all.
So instead, why keep x in the first place? memcpy(foo, NULL, 0) is
the same as memcpy(foo, some_uninitialized_variable, 0) in that it
does nothing.
Change-Id: Ib0a97c3e3fd1a2a6aff37da63376373c88ac595d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
gcc 11 insists.
Change-Id: Icec68ab7a3c0bce9b18e37c1b6f41603c97181e2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
gcc 11 complains about it otherwise.
Change-Id: Ic9b2124506f33c76902d3b44481f14182c1d74b9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This update adds a commit to fix building libgfxinit with gcc 11
Change-Id: I5c0e3823ab7219667f9430bce74e4f2fba0c0c3a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
CB:55356 removed static inline declarations from get_log_level(). This
commit puts them back. It also changes the method of accessing static
symbols in tests/console/routing-test to source file inclusion like
in CB:46458 to avoid changing tested source file.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Iaa5dcbccb327f819374967be51ef642b1fb25e7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55473
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the ThinkPad W541 based on Peter Lemenkov's initial W541
port. Compiled and tested with SeaBIOS and Tianocore booting into Arch
Linux 5.10.32-lts. The Haswell mrc.bin blob is required.
Tested working:
- SATA SSD
- SATA DVD drive
- M.2 SATA
- All USB ports
- SD card reader
- Speakers/headphone jack
- Keyboard/touchpad
- libgfxinit
- VGA
- mini DisplayPort (Thunderbolt untested)
- eDP laptop screen
- NVIDIA GPU in Linux
- Camera/Mic
- Smartcard reader
- Internal flashing when IFD is unlocked
- ThinkPad basic dock (VGA, USB, Ethernet)
- CMOS options
- WLAN
- Bluetooth
- Ethernet
- Using me_cleaner
- All DDR3 slots
Not working:
- Keyboard backlight
- First boot can take up to 20s (MRC.bin is slow)
Untested:
- Thunderbolt
- Internal flashing when IFD is locked
- Other ThinkPad docks (DisplayPort, DVI, Audio)
- ExpressCard slot
- Battery thresholds
- WWAN card
- Fingerprint reader
- USB Debug console
Signed-off-by: Justin Wu <amersel@runbox.me>
Change-Id: Ia43070f51bba3cf59ba9b7d9e29e4e778efbeb08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52659
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix compilation on x86_64 by using compatible types.
The MRC blob isn't supported yet as there's no x86_32 wrapper.
Tested on HP8200:
* Still boots on x86_32.
* Boots to payload in x86_64
Change-Id: Iab29a87d52ad3f6c480f21a3b8389a7f49cb5dd8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In x86_64 code every function call consumes 32byte of stack with
no stack local variables being used. That limits the function call depth
in SMM to 32 or less.
Double the stack size to prevent overwriting the stack canary as seen
on HP8200 and x86_64 enabled.
Change-Id: Iee202ba2ae609a474d0eb3b06f49690f33f4eda8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This fixes a hard to debug hang that could occur in any stage, but in
the end it follows simple rules and is easy to fix.
In long mode the 32bit displacement addressing used on 'mov' and 'lea'
instructions is sign-extended. Those instructions can be found using
readelf on the stage and searching for relocation type R_X86_64_32S.
The sign extension is no issue when either running in protected mode or
the code module and thus the address is below 2GiB. If the address is
greater than 2GiB, as usually the case for code in TSEG, the higher
address bits [64:32] are all set to 1 and the effective address is
pointing to memory not paged. Accessing this memory will cause a page
fault, which isn't handled either.
To prevent such problems
- disable R_AMD64_32S relocations in rmodtool
- add comment explaining why it's not allowed
- use the pseudo op movabs, which doesn't use 32bit displacement addressing
- Print a useful error message if such a reloc is present in the code
Fixes a crash in TSEG and when in long mode seen on Intel Sandybridge.
Change-Id: Ia5f5a9cde7c325f67b12e3a8e9a76283cc3870a3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Sort MSR definitions in ascending order to keep things organized.
Change-Id: Iadfd28014dc6f41dae7b52b1550c699c89fe8bdc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This is most likely an oversight. Given that the coreboot project as a
whole is licensed as GPLv2, add a GPL-2.0-only SPDX license identifier.
Change-Id: I1acaf901e1426bd6747f8a772a498a0005b457fa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
After ChromeOS NVS was moved to a separate allocation and the use
of multiple OperationRegions, maintaining the fixed offsets is not
necessary.
Use actual structure size for OperationRegions, but align the
allocations to 8 bytes or sizeof(uint64_t).
Change-Id: I9c73b7c44d234af42c571b23187b924ca2c3894a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allocate chromeos_acpi in CBMEM separately from GNVS.
Change-Id: Ide55964ed53ea1d5b3c1c4e3ebd67286b7d568e4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:179092979
TEST=boot guybrush and see romstage tag
14:finished loading romstage 2,683,151 (10,079)
1:start of romstage 2,683,159 (8)
970:<unknown> 2,683,386 (227)
15:starting LZMA decompress (ignore for x86) 2,683,391 (5)
16:finished LZMA decompress (ignore for x86) 2,717,867 (34,476)
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib8b3fe909140e05a89b74df526bf4f81799ad915
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55398
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's helpful to know if it's the start or end of a step.
BUG=b:179092979
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I550e2535615ff7e92c7c8a68c8b149f0a3476d1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: I18ee085cde0570ef278ea3869be30471ed04e3db
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: Icfde6b57ff5f6e49ff7804eff6e6a5819bb784bc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: Ib0858afa1b5dc9de9db87485d3e0bf6032416746
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: I19b5e1c4beebbc1ebd3d2e30bc22e8c890aaf78f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: I7d35c284b88b8828d31fff9ccafeb914542b0837
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
Add GPP_B2 to the early_gpio_table.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: If8c253236051f6d170fab444cfc166e5d2ed7bc2
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
Add GPP_B2 to the early_gpio_table.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: I49f7b1b69c3c3ab5593c7230d8f631a3b54c9c9d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
Add GPP_B2 to the early_gpio_table.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: I1214246bb1318869e9b6f57cb6a7e74bbe6574cc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
Add GPP_B2 to the early_gpio_table.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: Ifb6b5b14cec9e6f7c68aa9b01621fdb21c885552
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
Add GPP_B2 to the early_gpio_table.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: I07be950096aef42dbf4f067134e56c5849dfa02d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: Ia7db2d0a1fff98d1cfb8e7e979c0a81b9f3d0e9e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The system will hang when resuming from S3 if the SSD reset gpio is not
reset early enough.
Change GPP_A11 in baseboard to PLTRST to avoid an S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: Ia78d813cb6bc689b07e8d8ead1ade6e77f925ce1
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Part of the soc/amd/stoneyridge code already uses the FCH_IOAPIC_ID and
GNB_IOAPIC_ID defines. Use those defines in the remaining location to
make sure that the IOAPIC IDs are always consistent between the hardware
register, the MADT and the IVRS ACPI tables.
TEST=Timeless build of amd/gardenia results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I410a6560de66889b153c8a66b8dc5474ac114ba7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Now that device NVS is no longer used as such, stop using it to store
ACPI device settings consumed by the SSDT generator. Instead, provide
the get_acpi_device_state() function to allow saving ACPI device BARs
and activation state from other compilation units. Also, introduce an
enum and a struct to ease handling device state.
Tested on out-of-tree Compal LA-A992P, SerialIO SSDT does not change.
Change-Id: I9e70bf71e808651cb504399dcee489a4d1a70e67
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52521
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The same functionality can be provided through a runtime-generated SSDT.
The remaining parts of device NVS are removed in a follow-up.
Since the SSDTs are only loaded after the DSDT (if loaded at all), using
SSDT-provided objects outside method bodies is not possible: the objects
are not yet in OSPM's ACPI namespace, which causes in ACPI errors. Owing
to this, the operation regions used by the _PS0 and _PS3 methods need to
be moved into the SSDT, as they depend on the SSDT-provided BAR1 values.
Tested on out-of-tree Compal LA-A992P, generated SSDT disassembles with
no errors and contains expected values. Linux does not complain either.
Change-Id: I89fb658fbb10a8769ebea2e6535c45cd7c212d06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use the same code from Lynx Point on Broadwell, and adjust as needed.
Also add a config file to ensure the code gets build-tested.
Tested on out-of-tree Compal LA-A992P (Haswell ULT), UART 0 works.
Change-Id: I527024098738700d5fbaf3e27cf4db331a0322bd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In ACPI mode the device cannot be enumerated and thus the payload and
bootloader doesn't know about the active resources.
An ACPI aware OS can use the _CRS to determine the active MMIO window.
Mark the BAR0 as reserved if the device is in ACPI mode to make sure the
BAR is reserved in e820 tables.
Change-Id: I6079b1eb7b0c87c752515340aac8776244b30ca0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add support for Maple Ridge DDR5 SKU with boardid 0x16
TEST=Verified build for ADL-P Chrome RVP
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com>
Change-Id: I9f0e9072f5866b60fb8463bb90f61915c78568db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
BUG=b:188769922
Reported-by: Coverity (CID:1438963)
Change-Id: Ia520e33c9e4065236478665fb0ef047fa47c9b81
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54999
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Many more asus boards using Panther Point PCH other than Z77 can be
added as variants of this series.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I3e0b5734658912a69ccde94d530399059502c4c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Mainboard information can be found in the included documentation.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ic56ac0e5f93a6e818ef0666e41996718471b1cf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set register "generic.stop_delay_ms" to 150 to reduce power resume time.
BUG=b:185308246
TEST=tested on voema
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Idd90191ee7ecbbc544121dc0b93101bea64f0e5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54275
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
