summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-16[RFC] Address the leftover TODO in soc/intel/cannonlakeFurquan Shaikh
Change-Id: I4c989de4d2af3e810fb0e4803d0fa2396917d93e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50829 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/guybrush: Enable backlight in the OSMartin Roth
Add ACPI code to enable the backlight when we enter the OS. BUG=b:184198808 TEST=Backlight enabled in the OS Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I3e0a6c06120ac5abf0a0d82494e03d9cf80c1f8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52113 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/common: Correct Kconfig enable for ACPI GPIO functionsMartin Roth
The Kconfig value specified Intel instead of AMD. BUG=b:184198808 TEST=Backlight enabled in the OS Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I9fbdf821591ec886f383c1a5ac197f8f213c4cc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52384 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/zork: Configure HID over I2C related GPIO as level-triggeredVictor Ding
Both touchpads supported by zork use level-triggered wakeup signal. BRANCH=zork BUG=b:172846122,b:182911201 TEST=1. cros build-ap -b zork 2. both Synaptics and ELAN touchpads work fine on Vilboz 3. Wakeup source is correctly reported on Vilboz Signed-off-by: Victor Ding <victording@google.com> Change-Id: Icc2b5ad3bd434c9759a0fdfc121aa3c94f46630e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52367 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/zork: Configure IRQs as level triggered for ELAN touchpadVictor Ding
Based on the datasheet provided by ELAN, the /INT pin is "low active" and "indicates touchpad likes to send data to system(host) when low". The signal is level-triggered. BRANCH=zork BUG=b:172846122 TEST=cros build-ap -b zork Signed-off-by: Victor Ding <victording@google.com> Change-Id: I1f2182aaf483932304591ab14592f35214ea6efd Reviewed-on: https://review.coreboot.org/c/coreboot/+/52366 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2117_00Ronak Kanabar
The headers added are generated as per FSP v2117_00. Previous FSP version was v2081_02. Changes Include: - Adjust Reserved UPD Offset in FspmUpd.h and FspsUpd.h - Remove FivrFaults and FivrEfficiency Upds from FspmUpd.h - Few UPDs description update in FspmUpd.h and FspsUpd.h BUG=b:184129128 BRANCH=None TEST=Build and boot ADLRVP Change-Id: I068552084b1ef3e5c4fba7a46240d116c92c7b5b Cq-Depend: TBD Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-16mb/system76/lemp9: correct pad GPP_A11 (INTP_OUT)Michael Niewöhner
This pad is connected to INTP_OUT of the Type-C PD controller. Correct the comment. Also remove the unneeded pull-up. Checked with schematics. Change-Id: I16a769ac6a2d54da700ddb45bd9c7c84383a43dd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2021-04-16mb/clevo/cml-u/l140cu: correct pad GPP_A11 (INTP_OUT)Michael Niewöhner
This pad is connected to INTP_OUT of the Type-C PD controller. Correct the comment. Also remove the unneeded pull-up. Checked with schematics. Change-Id: I33a5f177affc3f13d091a85073499b7283f54ada Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-16soc/intel/xeon_sp: More PCU locksMarc Jones
Add the following locks as recommended by the Intel docs: DRAM_POWER_INFO_LOCK PCU_CR3_FLEX_RATIO_LOCK TURBO_ACTIVATION_RATIO_LOCK PCU_CR0_PMAX_LOCK Change-Id: I8d8211977e87109a91790a4070454fc561aa761b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2021-04-16soc/intel/xeon_sp: Call SMM finalizeMarc Jones
Call the SMM finalize SMI. Adds SMM_FEATURE_CONTROL setting to enable MCHK on code fetch outside SMRR and the register lock as recommended by the BWG. Change-Id: Ie3b58d35c7a62509e39e393514012d1055232d32 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51651 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Rocky Phagura Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/intel/common/block/fast_spi: Add flash PRR34 lockMarc Jones
Set the flash PRR3 and PRR4 lock to be set with SPI FLOCKDN. Change-Id: I288eea3e0e853e5067c5af23e22eab79330c0f20 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51779 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/dedede/var/galith: support Audio AMP I2C/Auto modeFrankChu
support audio AMP selection with fw_config. BUG=b:185082705 BRANCH=dedede TEST=build pass Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ieb169c69a6716082dd218d05479bca46bbc09a3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-16mb/google/dedede: Add AUDIO_AMP FW_CONFIG in devicetreeFrankChu
Add AUDIO_AMP ports bit field in devicetree. UNPROVISIONED 0 MAX98360 1 RT1015_I2C 2 RT1015P_AUTO 3 BUG=b:185082705 BRANCH=dedede TEST=build pass Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I54f1e44036857dc00df074c38fde0fa82e589320 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52317 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/portwell/m107/Kconfig: Reduce CBFS_SIZEFrans Hendriks
CBFS size equals flash size, leaving no space for descriptor and ME. Reduce CBFS_SIZE. BUG = N/A TEST = Build and boot Portwell M107 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: Ida5a248edf4f602c4a106ae29d706e732ef8454f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-16mb/facebook/fbg1701/Kconfig: Remove TPM_INIT_RAMSTAGEFrans Hendriks
TPM_INIT_RAMSTAGE needs to be enabled for measured boot only configuration. Remove TPM_INIT_RAMSTAGE disable. BUG = NA TEST = Boot possible combinations of VBOOT, measured boot and vendorcode security. Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: I91bde691d445d4210429c928e90e16653092f1cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/52051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-16mb/google/dedede/var/storo:Add P-sensor for storoZanxi Chen
Modify GPIO_D22/D23/E11 configuration for P-sensor BUG=b:185214363 BRANCH=dedede TEST=built storo firmware and verified P-sensor function Change-Id: Ia2df1a227b04688a6b98384cd3a4e63023c0c1d9 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-16soc/amd/cezanne: Update FADT to support S0i3Jason Glenesk
Set ACPI_FADT_LOW_PWR_IDLE_S0 flag in FADT. BUG=b:178728116 TEST=Dump FACP and confirm Flags bits match expected. Change-Id: I59ef762a18903135f9daa902ba8d1e40c451e96c Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52035 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/cezanne: Add modern standby option to chip configMathew King
BUG=b:178728116 Change-Id: I0d09bd4361f5f47360daf750efbc993010804902 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-16mb/system76/whl-u: Add Darter Pro 5 variantTim Crawford
The darp5 has several GPIO differences to the galp3-c, which are already accounted for in gpio.c. Change-Id: I951e86e53e9c47b9f3038927f44e505d37200c26 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/cezanne: Port ACPI p-state and c-state entries from picassoJason Glenesk
Add generate_cpu_entries to device operations. Add support to generate cpu p-state and c-state SSDT entries. BUG=b:184151560 TEST=Dump and verify SSDT entry for CPU p-states and c-states. Change-Id: I77d8078b94fb661dc045b4184955c8cbec373d12 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16tint: introduce the new tint build system with checksum verificationMike Banon
Three stages of the new tint build system: 1) generate_core.sh extracts the core part from buildgcc script, most importantly the checksum calculation/verification functions. 2) tintify_core.sh adds the tint-specific footer/header to the core, such as the properties of current version including its checksum. 3) tint.sh - generated and "tintified" core script - builds a tint. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ib71f5b861ecf91949a5af12812258e60873f0498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2021-04-16soc/amd/cezanne: Add uart controllers to chipset.cbIvy Jian
Add uart controller to chipset.cb and leave it off by default. Turn uart0 on for console for mainboards. BUG=none TEST=builds and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Iaeb7fea4b92bd89331c7ae7c1c000f8d9961fe9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16mb/google/brya: Configure TCSS OC pins for bryaMaulik V Vaghela
TCSS OC pins has not been correctly configured for brya. This patch fills the value from devicetree to correct the OC pins mapping BUG=b:184653645 BRANCH=None TEST=check if UPD value has been reflected correctly Change-Id: Ia21cdbf5768ad7516ea52bff7e247291a7d2ebd1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16soc/intel/alderlake: Allow devicetree to fill UPD related to TCSS OCMaulik V Vaghela
We need to change OC pin for type C USB3 ports and it depends on the board design. Allowing it to be filled by devicetree will make it easier to change the mapping based on the board design BUG=b:184653645 BRANCH=None TEST=compilation works fine and value of UPD is getting reflected. Change-Id: I61faa661c12dced27c6cdd7005a61ae8de8621e1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16mb/intel/adlrvp: Enable ALC711 over SNDW0Sridhar Siricilla
The patch enables ALC711 over SNDW0. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I43891b94728c8f2d644e14da11946fea3e4515aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/50022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-04-16mb/google/octopus: Add log for ssfc update codecEric Lai
Add log to show the codec has been disabled. BUG=b:185193926 TEST=cbmem -c | grep disabled, can find the codec name Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8ce7e435ce73beb2a5cbf5883905554227b1989b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-04-16soc/mediatek: Remove misleading memory logsYu-Ping Wu
When MRC cache region type is not found (for example, in recovery mode with !HAS_RECOVERY_MRC_CACHE), mrc_cache_stash_data() will return 0. Therefore, the platform code is not able to tell from the return value if the MRC cache data is actually written to flash or not. Since the MRC driver is already pretty verbose, ignore the return value and remove the misleading memory logs. BUG=none TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: I6b411664ca91b9be2d4518a09e9734d26db02d6e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52361 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/guybrush: Implement tis_plat_irq_statusRaul E Rangel
BUG=b:185397933 TEST=boot guybrush and no longer see tis_plat_irq_status warnings Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9b67cb59221d4e355df8e8a2205e03ead7dba51f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16soc/amd/cezanne: Select VBNV_CMOSRaul E Rangel
Needed so we can switch to normal mode. BUG=b:184126844 TEST=Boot guybrush in developer mode and switch to normal mode. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I26ad160a2372484e9753a727f2b454a31e3537a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16mb/google/{guybrush,mancomb}: Add VBOOT_VBNV_OFFSETRaul E Rangel
This is the same as zork. BUG=b:184126844 TEST=Boot guybrush in developer mode and switch to normal mode. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib11c255ab7e937de334ecd18dc030006f7724275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16mb/google/guybrush: Sort VBOOT_EARLY_EC_SYNCRaul E Rangel
BUG=none TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I658372d082a8276f15c7165fe4104de4613fe7d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-15soc/amd/common/block/gpio_banks: Use configure_scimap()Kyösti Mälkki
There is no need to stash the SCI trigger register configuration and apply it at the end. Remove this to make SCI and SMI programming more symmetrical and to use available configure_scimap function instead of implementing it again, but without the additional checks. Using this function also allows removing soc_route_sci. Change-Id: Ie23da79546858282910db65182a6315ade506279 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-15mb/google/guybrush,mancomb: include soc/gpio.h in baseboard/gpio.hFelix Held
This include provides the GPIO_x definitions. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I12a0d95f79658f3852132876e92c389b715f3001 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52358 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: move include to the files where it's usedFelix Held
platform_descriptors.h is unrelated to the contents of baseboard/gpio.h where it was included, so move the includes to the files where it is actually needed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94e59b5aac2df834d956106ac953eebfc5cf6921 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52357 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: include amdblocks/gpio_defs.h in baseboard/gpio.hFelix Held
amdblocks/gpio_defs.h provides the definitions of GEVENT_x. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I65d398667e6777de6f1fa4e027cf1c75a3e235c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52356 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/kahlee: use defines for GEVENT numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I353f0d241391dd1122c85866a74984b95ed54770 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52305 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v4133Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based on FSP version 4133. Previous version was 4043. BUG=b:185463045 BRANCH=none TEST=build and boot voxel Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I27d8f7783a944bdd21e3615799b1342ffb0edd22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-15Documentation: List the leadership meeting as one of our forumsPatrick Georgi
Change-Id: I00822cc631c5451862bd94683ff45289ecc75679 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Dabros <jsd@semihalf.com>
2021-04-15libpayload: Support herobrineT Michael Turney
BUG=b:182963902 TEST= validated on qualcomm sc7280 developement board Change-Id: Ic28f02cdf5c0e4c2458aee0ad7c74383c88d8874 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-04-15checkpatch_json: Mark robotic comments as roboticPatrick Georgi
Gerrit now knows to differentiate between "regular" comments and "robot" comments, with some later changes to the UI in the pipeline (e.g. to filter out robot messages) Change-Id: I3a545d1cf6c04b331964becd2b24eb38018394eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-04-15herobrine: sc7280: Provide initial mainboard supportT Michael Turney
BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Change-Id: I428cf1a461ee63215f5683abbfed90202d1b2a88 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-04-15sc7280: Provide initial SoC supportRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Change-Id: I1fc841b3113f2bf79b8376cd1ccdb671c53c2084 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-04-15mb/google/guybrush,mancomb: use EC_SCI_GPI in espi_sci_sources structFelix Held
The board's ec.h file defined EC_SCI_GPI as GEVENT_24, so use that definition in all places in the mainboard code instead of a mix of the board specific define and the SoC's GEVENT number define. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I46525ed24e9993acd3d850959dd63761a690d5df Reviewed-on: https://review.coreboot.org/c/coreboot/+/52309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-15cpu/intel/common: use lapicid apiWonkyu Kim
Use lapicid api to support both x2apic mode and apic mode BUG=None BRANCH=None TEST=boot to OS and check apic mode cat /proc/cpuinfo | grep "apicid" Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5ca5b09ae67941adcc07dfafdfe4ba78b0f81009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51725 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15src/*acpi: create acpi table for x2apic modeWonkyu Kim
Create acpi table for x2apic nmi, apic_ids BUG=None BRANCH=None TEST=boot to OS and check apic mode cat /proc/cpuinfo | grep "apicid" Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9399d30b686b55d86806f5db4110bf4a80fe459b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-15*x86: Support x2apic modeWonkyu Kim
Implement x2apic mode as existing code only supports apic mode. Use info from LAPIC_BASE_MSR (LAPIC_BASE_MSR_X2APIC_MODE) to check if apic mode or x2apic mode and implement x2apic mode according to x2apic specfication. Reference: https://software.intel.com/content/www/us/en/develop/download/intel-64-architecture-x2apic-specification.html BUG=None BRANCH=None TEST=boot to OS and check apic mode cat /proc/cpuinfo | grep "apicid" ex) can see apicid bigger than 255 apicid : 256 apicid : 260 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I0bb729b0521fb9dc38b7981014755daeaf9ca817 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51723 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15payloads/external/dc: Update depthcharge branch from master to mainMeera Ravindranath
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com> Change-Id: Ice0b908b23921cd9afbef52d2471f5ded277a136 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-15mb/google/brya: Add FPMCU power controlEric Lai
Enable CRFP power control in gpio table. RST needs to drive low before PWR enable. Since reset signal is asserted in bootblock, it results in FPMCU not working after a S3 resume. This is a known issue. BUG=b:181377402 BRANCH=None Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8a8fae80c3cc186e0a097ab2007abb656f382cbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/52185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15lib/rtc: Remove unnecessary year constraint in rtc_calc_weekdayJakub Czapiga
Algorithm used to calculate weekday is now based on Zeller's rule, so it does not need if statement constraining year to 1971 and later. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I25e2e6a1c9b2fb1ac2576e028b580db0ea474d37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-04-15Makefile: Add unit-tests help and targets listJakub Czapiga
Add unit-tests targets to help output. Add list-unit-tests target that lists all available unit-tests. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I464a76cbea1f4afbc3fc772960787952e61b95b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-04-15tests: Add lib/dimm_info_util-test test caseJakub Czapiga
Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I536566ba883bbeb558587a8d71e3d86152fb5e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-15Documentation/mb/ocp: Update Delta Lake documentationJonathan Zhang
Update OCP Delta Lake documentation following OSF (Open System Firmware) solution reaching DVT exit parity. This alternative host firmware solution uses FSP/coreboot/Linuxboot stack. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ifd6ab251cd7806cf8cd3f984ad88c091f85035cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/51824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-15mb/system76/oryp5: Enable TAS5825M smart ampTim Crawford
Allows using the internal speakers of the oryp5. Smart AMP data was collected using a logic analyzer connected to the IC during system start on proprietary firmware. This data is then used to generate a C file [1]. [1]: https://github.com/system76/smart-amp Change-Id: I148f18ff3e754d913bdf907121b103c6de02ffc3 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47962 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15drivers/i2c/tas5825m: Add driver for TI TAS5825MJeremy Soller
This adds a driver for the TI TAS5825M smart amplifier [1]. The driver expects the mainboard using it to define tas5825m_setup(), which uses the tas5825m_* functions to set configuration data. Each mainboard may have very different configuration data, depending on its audio hardware. Tested on System76 addw1, bonw14, oryp5, and oryp6. [1]: https://www.ti.com/product/TAS5825M Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Change-Id: I896e8f272f18e64bfc90f406e7d4163010800aaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/43614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/dedede/var/kracko: Add LTE modem supportTony Huang
Add LTE modem to devicetree Configure GPIO control for LTE modem BUG=b:178092096 TEST=Built image and verified with command modem status Change-Id: Id8f483e1132a08500fbe950711cc84197ce40b12 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-15mb/google/dedede/var/sasukette: Enable Wifi SAR for sasuketteTao Xia
BUG=b:185084331 BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ie982741cb7b328623cf27f41c31f819e8cdb7bc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-15mb/google/zork: fine tune stamp_boost parameter for dirinbozKevin Chiu
The new discovery from Google & AMD, the value currently used STAPM Time Constant of 1640 is reducing real PPT TSP from the target 4.8W to 4.68W. Furthermore, when using the "default" STAPM Time Constant of 1400, the actual real PPT TSP becomes 4.89W. Operating at this default settings therefore uses a higher real PPT TSP, which results in a significant performance improvement. BUG=b:175364713,b:184902568 BRANCH=zork TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I9cf4d51f42fe250340bcb642db07796c9a480c34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52312 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: fine tune stamp_boost parameter for gumbozKevin Chiu
The new discovery from Google & AMD, the value currently used STAPM Time Constant of 1640 is reducing real PPT TSP from the target 4.8W to 4.68W. Furthermore, when using the "default" STAPM Time Constant of 1400, the actual real PPT TSP becomes 4.89W. Operating at this default settings therefore uses a higher real PPT TSP, which results in a significant performance improvement. BUG=b:184902568 BRANCH=zork TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I102c1c5f8215a6c5f7a4451f5731167c32e27c90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52313 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14mb/google/dedede/var/boten: Add custom Wifi SAR for botenflexStanley Wu
Add wifi sar for botenflex. Due to fw-config cannot distinguish between boten and botenflex. Using sku_id to decide to load botenflex custom wifi sar. Detail reason for using sku_id in b:182433707. BUG=b:182433707 TEST=build and test on boten/botenflex Cq-Depend: chrome-internal:3686313 Change-Id: Id3f2529a7ad56ff306df98f77cda556656da52a5 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-14mb/google/volteer: Update collis device treeFrankChu
Update device tree override to match schematics. BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ib1698504cc0b377659fa60b4fae25227b5823753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-14mb/google/volteer: Add GPIO to collis supportFrankChu
Add support for gpio driver for collis BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ief225093bf93137384b64327a1c66576c9a5193a Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-14mb/system76/whl-u: Add System76 Galago Pro 3 Rev CTim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - NVMe port - SATA port - SD card slot - Left USB 3 Type-A port - Right USB 3 Type-A port - Right USB 3 Type-C port - Webcam - Ethernet - Integrated graphics using Intel GOP driver - mDP output - HDMI output - Internal microphone - Internal speakers - 3.5mm audio input - 3.5mm audio output - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not tested: - Thunderbolt functionality Change-Id: I5c992e603dbd57ae1b4ddc3a0f9bfc92d6acc813 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/amd/stoneyridge: use common pm_set_power_failure_state functionalityFelix Held
The functionality to restore the previous power state after power was lost that could previously be enabled by selecting MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's Kconfig instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I49c4a44ca2c4fa937a823c4eddf1618739c15114 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-14soc/amd/piasso/fch: use common pm_set_power_failure_state functionalityFelix Held
The functionality to restore the previous power state after power was lost that could previously be enabled by selecting MAINBOARD_POWER_RESTORE in the mainboard's Kconfig can now be achieved by selecting POWER_STATE_PREVIOUS_AFTER_FAILURE in the mainboard's Kconfig instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iab9578ebea89651dc2389bf6ca93ca3f3507eb47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-14soc/amd/common/block/pm: rework pm_set_power_failure_stateFelix Held
Picasso and Stoneyridge didn't do a read-modify-write operation on the lower nibble of PM_RTC_SHADOW_REG, but just wrote the upper nibble as all zeros. Since the upper nibble might be uninitialized before the lower nibble gets written, do what Picasso and Stoneyridge did here instead of what the reference code does. Also add a comment why and how this register behaves a bit weird. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0bda2349e3ae84cba50b187cc773fd8a5b17f4e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-14soc/amd/common/block/pm: remove POWER_STATE_DEFAULT_ON_AFTER_FAILUREFelix Held
Not selecting POWER_STATE_DEFAULT_ON_AFTER_FAILURE brings Cezanne that is currently the only SoC using this functionality in line with Picasso where the default is that the board remains in power off mode after power was lost and later restored. Boards can change this behavior by selecting POWER_STATE_OFF_AFTER_FAILURE, POWER_STATE_ON_AFTER_FAILURE or POWER_STATE_PREVIOUS_AFTER_FAILURE. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic96f40e3c9867cd821e58d752f58b763930f6d0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-14soc/amd/common/block/pm: select HAVE_POWER_STATE_PREVIOUS_AFTER_FAILUREFelix Held
Without this being selected, mainboards can't select MAINBOARD_POWER_STATE_PREVIOUS to use the power state restoration code path in pmlib.c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I753659fa753e03a66b6c6b2eb97e7ef20c71ca57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-14mb/google/brya: Enable CSE Lite SKUTim Wawrzynczak
The first CSE Lite SKU is available, therefore enable the Kconfig option to have the CSE reboot the system into its RW FW during a cold boot. BUG=b:183826781 TEST=50 cold reboot cycles Cq-Depend: chrome-internal:3758108 Change-Id: Ib3a1a9f8ac51bdab8858b2764d5bc0f6f07987cc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-14maintainers.go: Work around common mistake in MAINTAINERSMichael Niewöhner
Gerrit is able to add reviewers based on entries in the `MAINTAINERS` file. For inclusion and exclusion matches either paths or regular expressions can be used. The syntax is described in the header of the file. When matching a path, there are two sensible possibilities: - `path/to/file` matches a file. - `path/to/dir/` matches a folder including its contents recursively. - `path/to/dir/*` matches all files in that folder, without recursing into its subfolders. The trailing slash in the second example is essential. Without it, only the directory entry itself matches when, for example, the folder gets deleted, renamed or its permissions get modified. Reviewers in the list won't get added to changes of any files or directories below that path. However, from time to time entries get added without this trailing slash. Thus, implement a workaround in `maintainers.go` to check, if a path entry is actually a directory. In such case a trailing slash gets appended, so that the contents will match, too. Example: `path/to/dir` will become `path/to/dir/` Tests: 1. output before and after does not differ 2. manual test of resulting regex when running `maintainers.go` Change-Id: Ic712aacb0c5c50380fa9beeccf5161501f1cd8ea Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52276 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14maintainers.go: correct handling of globsMichael Niewöhner
maintainers.go does not handle globs as described in MAINTAINERS. Instead of only matching the files inside a directory, it also matches everything below. Also, a glob used in between (`e.g. path/to/*/dir`) could lead to matching many more paths unexpectedly. This is caused by the way paths using globs are converted to regegular expressions for use with gerrit: 1. The script converts all paths with trailing slash to a path with trailing glob. That means, a recursive match on a directory gets converted to match only the files in the directory (at least according to the documentation - if there wasn't 2). Example: `path/to/dir/` becomes `path/to/dir/*` 2. When converting the path to a regex, all globs get converted to prefix matching by replacing the glob by `.*`. Instead of only matching the files in the directory, everything below matches, which is a) not what the documentation states and b) the opposite of what 1. did first. Example: `path/to/dir/*` becomes `^path/to/dir/.*$` In sum, this leads to all sorts of issues. Examples: - `path/*/dir` becomes `^path/.*/dir$` - `path/to/dir/*` becomes `^path/to/dir/.*$` - `path/to/*.c` becomes `^path/to/.*\.c$` This change fixes that behaviour by: - dropping the wrong conversion from 1. above. - fixing glob matching by replacing `*` by `[^/]`. - handling paths with trailing `/` as prefix, as documented. The change was not split because these changes depend on each other and splitting would break recursive matching between the commits. Tests: 1. diffed output before and after is equal (!= the same) 2. manual testing of glob matching Change-Id: I4347a60874e4f07e41bdee43cc312547bea99008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-04-14mb/portwell/m107/Kconfig: Remove CACHE_MRC_SETTINGSFrans Hendriks
The CACHE_MRC_SETTINGS option is already selected in SoC Kconfig. BUG = N/A TEST = Build and boot Portwell M107 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Change-Id: I528c582419fb2044f5edfd7a070785489efdf7a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52154 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14lillipup: provide additional VBT for lillipup OLED skuKevin Chang
Lillipup add two sku for OLED panel. Additional VBT is necessary to modify PWM source from VESA eDP AUX interface BUG=b:183630802 TEST=emerge-volteer coreboot-private-files-baseboard-volteer check vbt_oled.bin is under build folder and check in CPU log. Cq-Depend: chrome-internal:3744227 Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I576297b8296def3c37a01ae0223fa332aa9f02b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52150 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14Rename do_printk() to printk()Nico Huber
The indirection seems unnecessary. The macros throw features like `-Wmisleading-indentation` off, though. Default build for QEMU/Q35 is unchanged. Change-Id: Ie4eab935a367b5ad6b38225c4973d41d9f70ef10 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-14console: Always add printf-format attribute to printk()Nico Huber
The attribute was missing in case the console is disabled. Change-Id: Iee23f6f4da61cd3637441705a8d3bbd2da7a33ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52231 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14intel: mma: Use new CBFS APIJulius Werner
This patch changes the Intel MMA driver to use the new CBFS API. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Icc11d0c2a9ec1bd7a1d6af362f849dac16375433 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-04-14intel: fsp2_0: Move last pieces to new CBFS APIJulius Werner
This patch ports the last remaining use of cbfs_boot_locate() in the Intel FSP drivers to the new CBFS API. As a consequence, there is no longer a reason for fsp_validate_component() to operate on rdevs, and the function is simplified to take a direct void pointer and size to a memory-mapping of the FSP blob instead. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If1f0239eefa4542e4d23f6e2e3ff19106f2e3c0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52281 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14vboot: ec_sync: Switch to new CBFS APIJulius Werner
This patch changes the vboot EC sync code to use the new CBFS API. As a consequence, we have to map the whole EC image file at once (because the new API doesn't support partial mapping). This should be fine on the only platform that uses this code (Google_Volteer/_Dedede family) because they are x86 devices that support direct mapping from flash, but the code was originally written to more carefully map the file in smaller steps to be theoretically able to support Arm devices. EC sync in romstage for devices without memory-mapped flash would be hard to combine with CBFS verification because there's not enough SRAM to ever hold the whole file in memory at once, but we can't validate the file hash until we have loaded the whole file and for performance (or TOCTOU-safety, if applicable) reasons we wouldn't want to load anything more than once. The "good" solution for this would be to introduce a CBFS streaming API can slowly feed chunks of the file into a callback but in the end still return a "hash valid/invalid" result to the caller. If use cases like this become pressing in the future, we may have to implement such an API. However, for now this code is the only part of coreboot with constraints like that, it was only ever used on platforms that do support memory-mapped flash, and due to the new EC-EFS2 model used on more recent Chrome OS devices we don't currently anticipate this to ever be needed again. Therefore this patch goes the easier way of just papering over the problem and punting the work of implementing a more generic solution until we actually have a real need for it. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I7e263272aef3463f3b2924887d96de9b2607f5e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52280 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/mediatek: Include sdram_info in ddr_base_infoYu-Ping Wu
Sync dramc_param.h with private repo mtk-dramk (CL:*3751861). BUG=none TEST=emerge-asurada coreboot TEST=Hayato boots with fast calibration BRANCH=asurada Change-Id: I79541f66ce68a75147c22b83a456e6268ca1485e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-04-14mb/google/cherry: Add MediaTek MT8195 reference boardYidi Lin
TEST=boot from SPI-NOR and UART works fine. Change-Id: I279b3d2da8a30b38686005212f6c019a9a646874 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-14soc/amd/picasso/fch: add missing amdblocks/gpio_banks.h headerFelix Held
The prototype of gpio_add_events() is provided by that header file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia384c9297ac1e24bf0b1bcce048012a247406f39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52274 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/amd/cezanne/fch: process ACPI PM/GPE and GPIO eventsFelix Held
BUG=b:184549804 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4ebbe9667d18a96b1a363d0353c612e214699d12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52273 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/amd/cezanne: save chipset state to CBMEMMartin Roth
Guybrush complains that this is missing during the boot, so add it to cezanne. I verified that the registers in gpio.c are correct. BUG=b:184549804 TEST=Build and boot Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3de3764c99fe89b962db88065575463b365ddaf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-14soc/amd/picasso/romstage: factor out chipset state saving functionalityFelix Held
Since Cezanne needs the exact same code, move it to the common directory and add a Kconfig option to add this functionality to the build. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I04c4295071a3df7afcb4dfd5435b11fb0bf6963f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-13mb/clevo/cml-u: drop LPC generic range for port 80Michael Niewöhner
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have to be set up as generic range. Drop the entry from clevo/cml-u, which has been forgotten in commit c5f1dc9. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I05844db4cfe96e6075bd6526ffc242973a2082c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-04-13tests/lib/bootmem-test: Add initialization of lb_mem fieldsJakub Czapiga
Add missing initialization of tag and size fields. Include initial size value in assertion in test_bootmem_write_mem_table(). Found-by: Coverity CID 1452250 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I27678a4eb01a0e6bedd0ba8c4b22a1b01afeaf12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-04-13lint: MAINTAINERS: check path matches to not only cover the directoryMichael Niewöhner
Gerrit is able to add reviewers based on entries in the `MAINTAINERS` file. For inclusion and exclusion matches either paths or regular expressions can be used. The syntax is described in the header of the file. When matching a path, there are two sensible possibilities: - `path/to/file` matches a file. - `path/to/dir/` matches a folder including its contents recursively. - `path/to/dir/*` matches all files in that folder, without recursing into its subfolders. The trailing slash in the second example is essential. Without it, only the directory entry itself matches when, for example, the folder gets deleted, renamed or its permissions get modified. Reviewers in the list won't get added to changes of any files or directories below that path. Thus, add a linter script to ensure a path match on a directory always ends with `/` or `/*` as shown above. Change-Id: I9873184c0df4a0b4455f803828e2719887e545db Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-04-13mb/hp/280_g2/romstage.c: Correct CaVrefConfig settingAngel Pons
With DDR4, CA Vref goes to channel 0, and CH1 Vref goes to channel 1. Change-Id: I64606824b4f82affb0fcfc78e68ba29859a1cc69 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-04-13dptf: Move platform-specific information to `struct dptf_platform_info`Tim Wawrzynczak
DPTF HIDs are different per-platform going forward, so refactor these into SoC-specific structures which the DPTF driver can query at runtime for platform-specific information. Change-Id: I6307f9d28f4274b851323ad69180ff4ae35053da Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-04-13soc/mediatek/mt8195: Add a stub implementation of the MT8195 SoCYidi Lin
TEST=boot from SPI-NOR and show console message at bootblock stage. Change-Id: Ia93430006096b7410393ab31fee4ea40598d0b34 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-12nb/intel/x4x: Refactor sync DLL programming (part 2)Nico Huber
Instead of counting consecutive matches (in `j`), check for a second match directly in the control flow. Also, add some dedicated variables: * `tap`: Keeps track of the tap value that resulted in a match and is eventually programmed into the hardware. * `tap2`: Is just temporarily used to search for another edge. Keeping `tap` sync'ed with the hardware has the benefit that we don't need to read the programmed value back for later fixups. Change-Id: I3ae541c39efdc695f5ca74bc757b2f009239ec93 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-12nb/intel/x4x: Refactor sync DLL programming (part 1)Nico Huber
Extract some common code patterns into functions. Change-Id: I5f8d40bb55d4b4f0639e0287881ae0ecde298590 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-12nb/intel/x4x: Sort code in program_dll()Nico Huber
Move the last block of the sync DLL programming up. It's independent of the switch/case statement that it's moved around. Change-Id: I71bc1ca1c629e4f2f4a13474c7e2c22d1a3b65d9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-12mb/google/mancomb: Temporary fix to set eSPI muxEric Lai
BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ief59bdea392ab3f141ccf7444c608aef99701d2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-04-12chromeec: make ssfc optional in fw_configKangheui Won
When EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG is enabled and SSFC is not set, all fw_config is invalidated. But for some platform this may not be necessary, we can treat missing SSFC as zero and use other 32 bits of firmware config. BUG=b:184809649 TEST=boot and check fw_config is not -1 even if ssfc is not set BRANCH=zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I21c7b0d449a694d28ad7b3f14b035e3a5830030a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-12mb/*: drop LPC generic range for port 80Michael Niewöhner
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have to be set up as generic range. Drop the entries from the devicetrees. Change-Id: I8a54d3c35a321a2d57bd846662f7339eff53e5a8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-12mb/amd/majolica/port_descriptor: use GPIO number defineFelix Held
TEST=Timeless build results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie39dc99bef4eb3776388d7406239bac6031bfaaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/52193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-12mb/google/mancomb: add DXIO and DDI descriptorsEric Lai
Sync from guybrush. BUG=b:182211161 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ica4e6511a5106a958567565b96d5888b8c829ff2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-12mb/amd/bilby: Use Picasso VBIOS as defaultRitul Guru
use PicassoGenericVbios.bin as default instead of raven VBIOS for Bilby. Change-Id: I99621173a33a1154f8bb4929d199288265bbe04d Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52209 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-11mb/google/dedede: Enable HECIAseda Aboagye
This commit enables HECI such that interface can be used from userspace on the dedede mainboards. BUG=b:184219504 TEST=Build and flash drawcia, verify that Intel Flash Programming Tool can communicate with the Converged Security Engine. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: I5b28c471d6554a5e14538073d48ef47da05936fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-04-11soc/amd/common/block/gpio: remove SoC type check in gpio_fill_wake_stateFelix Held
Verified that all accessed registers exist in all SoCs that use this code (Carrizo, Mullins, Stoneyridge, Picasso and Cezanne at the moment) and that the bit definitions match as well. Also at the time of writing this patch only Picasso calls gpio_fill_wake_state, so dropping the check won't change behavior. This also avoids having SoC specific code that doesn't get selected by Kconfig options in the common AMD SoC directory and also avoids having to add a check for SOC_AMD_CEZANNE to support this functionality on Cezanne in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If770780a67776daf81744db1b635ffd402653a47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52223 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 06:23:58 +0000