| Age | Commit message (Collapse) | Author |
|---|
|
i2c/alps driver implementation is an exact copy of the i2c/hid driver
with only the addition of ALPS0001_HID. This can be supported by the
i2c/hid driver using the hid field in devicetree which is what glkrvp
mainboard does. So, this change removes the i2c/alps driver which is
anyways unused.
Change-Id: I60761c384f3d800532b2b346272da7be28b77acd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change fixes the issue reported by Coverity CID 1393576 to ensure
that config is checked for NULL before it is actually used.
Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Enrico Granata <egranata@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Tested with GRUB 2.02 as a payload, booting Arch Linux as
well as Debian. This code is based on the output of autoport
as well as other mainboards supported in coreboot already.
Working:
- Serial port I/O
- S3 suspend/resume. Untested with SeaBIOS since it failed
to resume on a similar board. It is likely to be due to
low memory corruption, but I have not worked on it.
- USB ports and headers
- USB3 ports attached to the ASM1042 controller. SeaBIOS can
boot from them, and it is likely GRUB can detect devices on
those ports as well. The chip has a small SPI flash nearby,
which seems to hold an Option ROM.
- Gigabit Ethernet
- Integrated graphics (libgfxinit)
- VGA BIOS for integrated graphics init
- PCIe x16 graphics
- PCIe x1
- SATA controller
- Hardware Monitor
- Fan Control (fancontrol on linux works well)
- Native raminit
- flashrom, using the internal programmer. Tested with coreboot,
as well as with the vendor firmware.
- NVRAM settings. Only debug_level has been tested.
Untested:
- DVI port. It can detect a "fake" display, that is, an
EEPROM connected to the DVI port. Thus, gma-mainboard.ads
has been setup accordingly.
- PS/2 port.
- Audio: Only rear output (green) has been tested.
- EHCI debug.
- Parallel port header.
- Non-Linux OSes
- ACPI thermal zone and fan control (probably not working)
Not working:
- Booting from devices attached to the ASM1061 controller.
Devices on ports work fine once Linux has loaded.
- Any SATA devices with Tianocore (payload issue)
Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/26419
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Regarding "Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family",
Document Number: 307502-005, page 91, if Channel B is empty,
all of the C1DRBs are programmed with the same value as C0DRB3.
Mobile 945 express chipset datasheet doesn't mention this specific case.
Change-Id: Ic26103aac7f920e5696b445e125d33405df4f43b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27204
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table
BUG=b:110498646
BRANCH=none
TEST=none
Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27184
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This configures a GPIO pin for enabling/disabling bluetooth on the
next version of the atlas board. The default is for bluetooth to be
enabled at this point.
BUG=b:110614620,b:110613353
BRANCH=none
TEST=none
Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27185
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures serial debug is not enabled by default on Cannonlake
platform.
Change-Id: Id925c8c73971a027e45ea3c61e878f134bc9feff
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/27205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem.
BUG=b:109941652
TEST=The thermal team verify OK
Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Move GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC under each variant config and
select it for bip and fleex only.
Functional change in this CL is that EC SW sync will be enabled for
phaser.
BUG=b:110523400
Change-Id: If6f37c6b2ee71130b9ed5b10ce92fb23fa1c39fc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Bootblock has grown beyond 32K, grow to 40K
Change-Id: Iedc52151e223ebf4ff5b35a419b5378a6f1c661b
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/26760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add CONFIG_LP_CHROMEOS to configuration file
Change-Id: I528dee96cf5052b99b8f7573010d98fd80680688
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/26711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in
CBFS, but only changed the loader in soc/intel/common, forgetting
the separate one used by FSP 1.1.
As the soc/intel/common loader has now been rolled into the one in
drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one.
Also, remove 2 now-unused header files.
Test: build/boot google/chell, observe display initialized prior
to OS load, no FSP warning in cbmem console due to invalid VBT signature.
Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-on: https://review.coreboot.org/27172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This adds a new driver for the SX9310 proximity detector device.
The purpose of this is to enable the device's calibration information
to be stored in firmware, and then transferred over to the kernel
via ACPI.
This device has more than 10 individual configuration parameters,
so they would not fit in the generic driver's properties table.
Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-on: https://review.coreboot.org/27173
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some older CPUs have a fixed size of 2048 bytes for microcode total size.
Change-Id: Ia50c087af41b0df14b607ce3c3b4eabc602e8738
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27090
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alternative buffer communication support for PTT is no longer
needed for CNL onwards and coreboot does not need to reserve additional
4KiB memory for PTT support.
Change-Id: I11993cef77fd5e879eedabc1ed344f91f8257c90
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/27176
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SoC users from IOTG team is looking forward for a solution to skip
coreboot AP initialization flow and make use of FSPS-UPD to
perform AP reset.
TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs
out of reset.
Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Adds missing PCI IDs to allow tool to dump the
C220 PCH (8 series) southbridge.
Intel Document 328904 is the datasheet for this PCH.
Change-Id: I07a8f2e9cb0ee8677c8fe2c51881147ed81c1a35
Signed-off-by: Quan Tran <qeed.quan@gmail.com>
Reviewed-on: https://review.coreboot.org/27168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The packge uuid-devel doesn't provide the required files,
but libuuid-devel does.
Change-Id: I61d537e4f1fca0d7172c129a75e13aa58452763f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use SPI_BASE_ADDRESS instead of PRERAM_SPI_BASE_ADDRESS like
big core in order make common code implementation straightforward.
Change-Id: Ibcb013fc95de29234253e89c9ca100cc468d44f6
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/27097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Select all Kconfig belongs into Intel SoC Family basecode/stage files
and include required headers from include/intelbasecode/ files.
BUG=None
BRANCH=none
TEST=Code is compiling with cannonlake configurations and also booting
on cannonlake RVP.
Change-Id: Iac99b4346e8bf6e260b00be9fefede5ad7b3e778
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/25734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I61fb3b01ff15ba2da2ee938addfa630c282c9870
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I2fe8d8388cb96e42af4f9be251a41cceeb2e4710
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27042
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No Change in BUILD_TIMELESS.
Change-Id: I634526269d45ebdc6c31cdc28d9ec846b397211d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In the end it does not look like RCBA register offsets are fully
compatible over southbridges.
This reverts commit d2d2aef6a3222af909183fb96dc7bc908fac3cd4.
Is squashed with revert of "sb/intel/common: Fix conflicting OIC
register definition" 8aaa00401b68e5c5b6c07b0984e3e7c3027e3c2f.
Change-Id: Icbf4db8590e60573c8c11385835e0231cf8d63e6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ibe54096f275a05bda745ae2cc76c0109281c0c4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
PM registers used for generating SWS values are being stored in a static
variable within southbridge.c. In order to have it available for any source
involved in building the platform, move the storage to cbmem, using id
CBMEM_ID_POWER_STATE. Also add a variable that informs from which state
the system is waking from, extracted from register ACPI_PM1_CNT_BLK. This
variable will later be useful in detecting failed S3 resume.
BUG=b:80119811
TEST=Add code to print SWS parameters and state it's waking from. Build
and boot grunt, suspend and resume, check output for valid values. Remove
the print code.
Change-Id: Ib27a743b7e7f8c94918caf7ba5efd473f4054986
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27109
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Is unused in the tree.
Change-Id: I8a5308b6c7773d791d47832e620558394f1d727e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22132
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Upstreaming Chromium commit 0bc6c43:
Lili: Update Memory IDs
TEST=Build and boot up on lili board
Original-Change-Id: I6da1e97820b1bf2e751102384eed07236143fe2b
Original-Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/956782
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: Icf6588582da3b4a7861bced539d51a914b011dc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27135
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`freetype-config` is gone and was obsolete for a long time.
Change-Id: Id3058e55b1630f43225d3cd1ad91801c4085874f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/26822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Adds the CMOS option for Dual Graphics, as is present in more Lenovo models
already. Enabling this option ensures that the NVIDIA GPU is powered.
More PCI devices can be observed when activating this setting. It was verified
on a W520, also by loading a VGA option ROM and achieving a working Dual
Graphics system.
The CMOS default has been kept to 'Integrated Only', as the usage of Dual
Graphics requires an option ROM and drains the battery more quickly.
Change-Id: I41ccabd4554ca019684edd6f8b1c23679212c59f
Signed-off-by: Nico Rikken <nico@nicorikken.eu>
Reviewed-on: https://review.coreboot.org/26114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table
- add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF
BUG=b:110277021
BRANCH=none
TEST=none
Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When played Left Only Audio and Right Only Audio, we observed that Audio
got swapped. Left Data played on Right Speaker and Viceversa.
This patch fixes the above issue.
BUG=b:73635449
TEST=Play Left only & Right only Audio and cross check Audio.
Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/27167
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
C1E is disabled by the kernel driver intel_idle at boot. This does not
address the S3 resume case, so we lose state and C1E is enabled after S3
resume.
Disable C1E for SKL and KBL. This gives a coherent state before
and after S3 resume.
TEST='iotools rdmsr cpu 0x1fc'. Returns the same value after boot and S3
resume with bit [1] set to zero (0x20005d).
Change-Id: I1343f343bfac9b787f13c15b812c0a201dcccb38
Signed-off-by: Cole Nelson <colex.nelson@intel.com>
Reviewed-on: https://review.coreboot.org/27125
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The entire StdHeader field is really supposed to
be forked from a template for each entry into the
AGESA API. Current code assumes only Callout would
be relevant, which is not quite the case.
Change-Id: I0cc66d01d62fa8dc6bb7c9f9fab6fa4753827554
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Set register speed_shift_enable=0 in devicetree to disable
p-states in coreboot as a temporary workaround for an SoC hang.
BUG=b:79666828
BRANCH=none
TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage",
flash spi image onto nocturne, boot to kernel and verify device
stays alive and responsive for several minutes without locking up.
Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
DRAM_DMA section is used for the special SPI NOR controller on legacy
SOC. Remove it since no driver need it currently and we don't have the
special SPI NOR controller on mt8183.
BUG=b:80501386
BRANCH=none
TEST=Boots fine on Kukui
Change-Id: I6ba0757adbf4f1f8d2688e5ab1a36007e4e0d0fd
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Using common watchdog timer (WDT) code for reset. Set up watchdog timer
in mtk_wdt_init() to get reset status and disable auto-reboot. Link
common do_hard_reset() to support hard reset.
BUG=b:80501386
BRANCH=none
TEST=both mtk_wdt_init() and do_hard_reset() work on Kukui.
Change-Id: I4be3a133dbb8a64604133cefb0c5f02d01afd0d4
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27026
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move watchdog timer (WDT) code which can be reused into a common
directory under soc/mediatek.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: Icbeb04f775c3c0fdc18dd198df8591f5c4b6ddce
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27025
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor watchdog timer (WDT) code which will be reused among similar
SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: I745c2f204924d9eee1941c0f3e9b6ba45cfb1958
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27024
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a temporary hack to test camera presence before we have full
camera support implemented. Basically, we can now probe the camera
over i2c to verify that it's connected and the camera LED turns on.
BUG=b:80106316
BRANCH=none
TEST=camera LED comes on and camera can be probed over i2c.
Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27128
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds the necessary config to enable touchscreen sensor in linux.
BUG=b:110286344,b:110286345
BRANCH=none
TEST=verified touch functionality using eval board
Change-Id: I21efafda3f2ae1dcea19e44f8d66f6dfaac1bb12
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We plan to use i2c-hid compatible trackpads on atlas, so this switches
the trackpad config to i2c-hid.
BUG=b:80662079
BRANCH=none
TEST=used trackpad to verify motion tracking
Change-Id: I2702e61a6aa96250c0c09ea4bd15d0c671eedadc
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27126
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change defines SAR sensor device into devicetree.cb.
Since only LTE sku has SAR sensor, we will use GPP_B20 as a device_present_gpio.
BUG=None
BRANCH=poppy
TEST=Verified SAR sensor device is loaded by driver in Chrome OS
Change-Id: Ib4969e4b82d18b1b1a599de8226c2d7d4bda7915
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/27149
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nautilus 2nd SKU has a leakage voltage at GPP_D0 in S5 state. We need to set this to LOW when entering S5 for clear the leakage.
BUG=None
BRANCH=poppy
TEST=Verified the leakage is gone after update coreboot
Change-Id: I054e707b2bc2e63d6f99cd2fd8a57be20615f111
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/27148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For supporting new SKU, we need to override GPIO table and device configuration.
The board ID of 2nd SKU of nautilus is started from 9, so we would determine SKU with it.
BUG=b:80052672
BRANCH=poppy
TEST=emerge-nautilus coreboot
Change-Id: I7242f23f47010664cc29ea86a126e63c9dd62ccd
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/27147
Reviewed-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a file for uncore ASL code that is common among
Broadwell-DE mainboards but is currently copy + pasted in each of
their dsdt.asl files.
This is only for clean-up purposes. It is unclear if the code itself is
really necessary, but until we can do further investigation and testing
it will be left in.
Change-Id: I188e5e46dfa7c2ed3991fb97f2c1b5e062e2212d
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/27155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Collected timestamps indicate LZMA decompression of ramstage
is 4x slower when ROM is marked WP-cacheable, in contrast to
having ROM as US. A simple copy WP->WB with uncompressed
ramstage also appeared to be twice as slow as UC->WB copy.
It should be noted that if POSTCAR_STAGE was removed from build,
un-lzma takes 130 seconds instead of 45 milliseconds.
Change-Id: I2cf995395ef2d303ad0bc044dbfa160990a705d0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ic6e2a350a976a3fcb421d47a0bf5600df994edc2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change fixes the following issues with EC_IN_RW signal:
1. EC_IN_RW is an input signal to the SoC. Configure it accordingly in
GPIO table for baseboard and bip.
2. GPIO_EC_IN_RW is passed in coreboot tables so that payload can
re-sample the GPIO at runtime.
BUG=b:110084012
TEST=Verified that EC_IN_RW signal is read correctly in depthcharge.
Change-Id: I1c5f5b4b914ced98e89a571dc398df5ba1fe8460
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This change adds Synaptics device to phaser project.
BUG=b:110236590
TEST=emerge-octopus coreboot chromeos-bootimage
reflash the coreboot to DUT,make sure the Synaptics Touchpad can work.
Change-Id: Icc1e8c35a9de54ed04187fcf219a72a592d3bd81
Signed-off-by: Xingyu <wuxy@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27159
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Add LinuxBoot support
* Add u-root mode
* Download kernel and u-root from upstream sources.
* Add customization options
* Clean kernel only if directory exists
Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/23071
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Add support for parsing and booting FIT payloads.
* Build fit loader code from depthcharge.
* Fix coding style.
* Add Kconfig option to add compiletime support for FIT.
* Add support for initrd.
* Add default compat strings
* Apply optional devicetree fixups using dt_apply_fixups
Starting at this point the CBFS payload/ can be either SELF or FIT.
Tested on Cavium SoC: Parses and loads a Linux kernel 4.16.3.
Tested on Cavium SoC: Parses and loads a Linux kernel 4.15.0.
Tested on Cavium SoC: Parses and loads a Linux kernel 4.1.52.
Change-Id: I0f27b92a5e074966f893399eb401eb97d784850d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
* Add documentation for CN81XX SoC
* Add documentation for CN81XX EVB SFF mainboard
* Add documentation for BDK
* Add documentation for BOOTROM and BOOTBLOCK behaviour
* Alphabetically sort vendors
Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Import from https://chromium.googlesource.com/chromiumos/platform/depthcharge
Coding style and coreboot integration will be done in a separate commit.
Change-Id: Iee56db328d7eeffb0eaf829841243b0b9195c199
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Set the payload argument in selfload, as other (non self) payloads, are
going to set a different argument.
Change-Id: I994f604fc4501e0e3b00165819f796b1b8275d8c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25861
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to schematic, we need to correct USB OC pin configuration.
- OC0 for Type-C Port 1
- OC1 for Type-C Port 0
- OC2 for Type-A Port
- OC3 to NC
BUG=NONE
BRANCH=poppy
TEST=emerge-nautilus coreboot
Change-Id: Ic71baef646926cc6aadcc5dda7cb14f00e8d3687
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/27099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds ACPI properties for SYTS7817 device.
BUG=b:110013532
Change-Id: Ifdec4efce169c066f212a393df21089d43d8e4d6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This creates a fleex variant for octopus. Nothing is set in the variant
files here; everything is picked up from baseboard.
BUG=b:110085182
TEST=None
Change-Id: Ia8b8bb757f67bea997b7f43489c38cac62f7682d
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/27105
Reviewed-by: Jett Rink <jettrink@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The endian conversion function be32toh() is defined in
src/include/endian.h, however this file is not used for cbfstool
compilation. Currently the one provided by the host is used and if the
host does not provide this endian.h file, the build will fail.
However, we do have endian conversion functions in commonlib/endian.h
which is available for cbfstool compilation.
Switch from be32toh() to read_be32() in order to avoid relying on a
host provided include file.
We use functions from commonlib/endian.h already in cbfstool.
Change-Id: I106274cf9c69e1849f848920d96a61188f895b36
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/27116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Boot tested on asus/p2b-ls and p2b-ds.
Change-Id: I0154f1d120bef3b45286fb4314f0de419cd8341e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/26821
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I96f42d5dc10d36855bdca64d1406a254250ee5b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26820
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I323426e0d9ddee1be72d15702fee4f92c7b348cc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This moves CAR stack under variable MTRRs and removes
old CAR code that used complex fixed MTRRs and placed
stack in low memory.
Change-Id: I75ec842ae3b6771cc3f7ff652adbe386c03b9a5f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/26586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These CAR init files are no longer used.
The _ht variant will be used as basis for P3 CAR
using with variable MTRRs so we only move file.
Change-Id: Iace8762c11e2f282df1850f7be170c841d4881f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27084
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DEVEN defines are wrong, but weren't used at all.
Fix them as they are needed by the hybrid_graphics_driver and
use the defines instead of magic values.
Tested on Lenovo T410: The IGD turns on with the correct value.
Change-Id: Idf9fc0115de5c72f7d5d88cbb09ae1d2fee0afd0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Fix coding style.
Change-Id: Id13c0ee284293c0c06d46c75c850bc7e81cfc1f6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The dram controller cannot fully initialize the dram on warm
reset (receive enable calibration consistently fails) therefore
requiring cached timings.
This option is mostly useful when rebooting after having flashed a new
rom which overwrites the mrc cache region.
Change-Id: I405c0eca076fe081641ede9a670f734c98cbf8fc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This is a small 8 megabit (1 MiB) part.
Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
All Grunt variants should identify as grunt in SMBIOS so that
they're recognized correctly as a unibuild Grunt variant.
BUG=b:110244268
TEST=Careena identifies as grunt
Change-Id: Iaf254149fbec9551d9220018d6d6a0a1be741538
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/27117
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I69b014430802de132c8d9b6c8409bc762b995468
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27093
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This pin does not have a native function for eSPI. Nonetheless if we use
eSPI, it should be configured as a GPIO and kept unconnected to allow
S0ix entry.
Also removed initialization of LPC pins in mainboard code as they are
already initialized in chipset code. The settings fpr LPC pins in
chipset code were updated to those that were previously in mainboard
code and have been validated on LPC flavor of Geminilake RVP.
BUG=b:79251613
BRANCH=none
TEST=From kernel prompt in bip, type powerd_dbus_suspend.
Check on EC console that SOC enters S0ix.
Change-Id: Ie0c1013fee638a3b7a91469736efc0c25a1597fa
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/23742
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to support booting a GNU/Linux payload on non x86, the FIT format
should be used, as it is the defacto standard on ARM.
Due to greater complexity of FIT it is not converted to simple ELF format.
Add support for autodecting FIT payloads and add them as new CBFS_TYPE 'fit'.
The payload is included as is, with no special header.
The code can determine the type at runtime using the CBFS_TYPE field.
Support for parsing FIT payloads in coreboot is added in a follow on
commit.
Compression of FIT payloads is not supported, as the FIT sections might be
compressed itself.
Starting at this point a CBFS payload/ can be either of type FIT or SELF.
Tested on Cavium SoC.
Change-Id: Ic5fc30cd5419eb76c4eb50cca3449caea60270de
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update dptf.asl and TCC parameters from tuning of the thermal team.
BUG=b:72974136
TEST=Match the result from DPTF UI
Change-Id: Ic0ffc169ad3939cacb46824ed23999c61a23d2c4
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27086
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable keyboard backlight by Careena SKUID
Set to 10% as the same as google/snappy project
BUG=b:110065836
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I7d302c4f50528b0e6b7ef4d990f342a69cff34f5
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/27021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Tested on Google peppy (Acer C720).
Change-Id: I6453c40bf4ebe4695684c1bd3a403d6def82814f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ifb8aa43b6545482bc7fc136a90c4bbaa18d46089
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/22957
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I595198d66193c63f6c80c39371fbec10065d2165
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib5d574347373009c8021597f555e6e86c2c0c41f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3544ce4a573b6996d64b140d8acdaeb3de430896
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I6919845965d90fe8a20a07748ae4804fed0d0cef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27013
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Libgfxinit provides a better alternative to the native C init. While
libgfxinit mandates an ada compiler, we want to encourage use of it
since it is in much better shape and is actually maintained.
This way libgfxinit also gets build-tested by Jenkins.
Change-Id: I4843f52307b87cff6fa6f4d0c74b87428fefa8ac
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
TESTED Intel DG41WV with VGA, Intel DG43GT with VGA and HDMI1 and
HDMI2.
Change-Id: I774b79cc0ef9dc72ccf48901ab94376b27ed9c7a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some things were coding errors, other things need to be fsb specific.
Most things here don't seem to matter all that much but better to get
it right.
Change-Id: I1afa637a16a083c3a945ba3e2a71292b005736fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It looks like this hardware has a bug where the display controller
does not work properly when dram is clocked 533MHz and the channels
are configured in non-stacked mode.
The workaround is to select stacked mode in this configuration.
Change-Id: I6f37ce15a4e98a4cdbd6d893f22846a65c8be021
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
There seems to be a hardware bug where the combination of non-stacked
channel settings, both channels populated and 533MHz dram speed cause
the display to be unusable.
The code to actually select stacked mode based on hardware
configuration will be add in a followup patch.
This patch does the following:
* Add option to the sysinfo struct for stacked mode
* Fix programming channel 1 DRB which needs special care for the last
populated rank in stacked mode
TESTED on Intel dg41wv (with stacked mode hardcoded and dram at 533MHz)
Change-Id: I95965bfea129b37f64163159fefa1c8f16331b62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/26563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use of device_t is deprecated.
Change-Id: I6adc0429ae9ecc8f726d6167a6458d9333dc515f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
GSMI Set Event Log is taking more than 1K in stack. This causes the
stack to overflow into the adjacent stack. This has the side effect of
causing any CPU waiting for the SMI handler to complete to crash when
the lock is unlocked because the return pointer has been smashed.
BUG=b:80539294
TEST=built on grunt and tested by running `halt` from the OS.
Change-Id: Ib170c7d03909ef3d20831726b285178a75007b06
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27033
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stoneyridge is running into a stack overflow in the SMM handler.
BUG=b:80539294
TEST=built on grunt
Change-Id: I94e385497bd93c3638c69fb08d9b843c3bbb55ce
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27034
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPP_E2 will be used as a BT reset line, so configure GPP_E2 as an
output and initialize it high (high = out of reset).
BUG=b:80089559
BRANCH=none
TEST=none
Change-Id: If45ef3a592c389a0b80298c59eea849d07d9671e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
FCAM_PWR_EN signal is changing to connect to GPP_B4 instead of
GPP_D8 as it needs a 3.3v gpio to provide enough power to also
directly power the camera LED.
BUG=b:79667559,b:78122599
BRANCH=none
TEST=none
Change-Id: Ie875ced45dfa2aa7069851004edde8f77329df34
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
|
|
C1E is disabled by the kernel driver intel_idle at boot. This does not
address the S3 resume case, so we lose state and C1E is enabled after S3
resume.
Disable C1E for GLK as it is for APL. This gives a coherent state before
and after S3 resume.
TEST='iotools rdmsr cpu 0x1fc'. Returns the same value after boot and S3
resume with bit [1] set to zero (0x20005d).
Change-Id: I437cbaca75c539c2bc5cd801ab8df907e7447d10
Signed-off-by: Cole Nelson <colex.nelson@intel.com>
Reviewed-on: https://review.coreboot.org/27019
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Register 0x1fc (MSR_POWER_CTL) deserves a proper mask for the C1E
enable bit. Define POWER_CTL_C1E_MASK to be used subsequently.
Change-Id: I7a5408f6678f56540929b7811764845b6dad1149
Signed-off-by: Cole Nelson <colex.nelson@intel.com>
Reviewed-on: https://review.coreboot.org/27035
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a method to retrieve a node's phandle.
Useful for board specific devicetree manipulations.
Change-Id: I966151ad7e82fc678ab4f56cf9b5868ef39398e0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Move generators for the board status report and the kconfig options
report into a common directory and wrap them in a docker container.
Also rework to emit HTML not wiki syntax.
Change-Id: If42e1dd312c5fa4e32f519865e3b551bc471bc72
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/26977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of checking each directory in series, kick off the checks
in parallel and then wait for them to finish. Failures print out with
file information, so mixing output isn't a problem. This reduces
the time it takes to run on lumberingbuilder by 60%.
This could probably be sped up even more by splitting up src/mainboard
into smaller sections.
This method does skip a few control files at the top level - .gitignore,
.checkpatch.conf, gnat.adc, etc. These could be added to the list of
files to check, but I didn't think it was needed.
Change-Id: I171977e713a9956cf4142cfc0a199e10040abb35
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Per PCI specification, function 0 must be present,
so functions 1 to 7 can be skipped in this case.
For a device that is not multi-function, it may not
decode function number in the hardware at all. To
avoid registering such a device eight times, skip
scanning functions 1 to 7.
Without the latter fix, a single-function PCI bridge
may call pci_scan_bus() second time and secondary
side devices would get appended second time in the
array devices[]. At that point, quicksort() apparently
hits an infinite recursion loop.
Since pci_scan_bus() is called in part of the early
modules->init() sequence early in main(), the errors
here left coreinfo payload completely silent when
PCI module was built-in on affected system.
Terminal screen was cleared, though.
Change-Id: Ifc6622f050b98afb7196de0cc3a863c4cdfa6c94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
With platforms moved to RELOCATABLE_RAMSTAGE, these
overrides no longer have a meaning.
Overrides existed because AGESA ramstage did not fit within
the default 1 MiB of RAMTOP - RAMBASE, when placed low.
Change-Id: I0185875dc550de74877c94f36128d5979e5553d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26813
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
