summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-12mb/system76/*: Add CMOS option tableTim Crawford
System76 uses several custom CMOS values downstream. Reduce our diff by providing a generic layout with the defaults: boot_option=Fallback debug_level=Debug power_on_after_fail=Enable Tested on galp3-c, gaze15, oryp5, oryp6. All boards boot multiple times with USE_OPTION_TABLE selected. Change-Id: Ie57b0e5713bba8ad46e1a4123a3ddd43e0eea964 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-08-12soc/mediatek/mt8192: move DFD driver to common folderRex-BC Chen
Move DFD driver to common folder so MT8195 can also use it. BUG=b:192429713 TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7937cddf5f3a66f9269a94301d3134e6f4f9f22e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-12vc/mediatek/mt8195: Optimize DRAM init time by disabling Vcore settingRyan Chuang
Remove the unnecessary Vcore setting for the DVFS feature. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: If3c28e57a559a7ec04319c1a489138817e44ec4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-12soc/mediatek: revise the dependency of DVFS config optionsRex-BC Chen
The MEDIATEK_DRAM_DVFS_LIMIT_FREQ_CNT only makes sense if DVFS is enabled (e.g., MEDIATEK_DRAM_DVFS) so we should change it to depend on that instead of selecting DVFS. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib81e4e48e863616ed1e36cd5c0000f4e2cfb5456 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-12drivers/generic/alc1015: Add HID to support alc1019Eric Lai
ALC1019 will use the ACPI compatible and share the same driver with ALC1015. Add HID to support more compatible ICs. BUG=b:195891240 TEST=ALC1019P driver can probe properly. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3e98297f3a39048b24d61e61ca95c60cd2037eb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-12libpayload: Mark Intel 300 series AHCI as testedNico Huber
Tested with filo on roda/rw14. Change-Id: Ia5f868d3a9cead0a872e6d3e9fdacd6eeb7f158b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56666 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12MAINTAINERS: Add Maxim Polyakov as intelp2m maintainerMaxim Polyakov
Change-Id: I85835712926ca456b108b1d80e6a55f75e604591 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-12mb/google/dedede/var/galtic: Add charger throttling functionFrankChu
Add charger current throttling support for galtic control charger index * 64 = Value mA 32*64=2048 28*64=1792 24*64=1536 20*64=1280 BUG=b:187231627 TEST=Built and tested on boten system Cq-Depend: chrome-internal:3846209 Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I5e1849551ff051bca591f19f9e40da4c89ab74e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-08-12mb/google/dedede/variants/haboki: add discrete TPM in overridetreeWisley Chen
Haboki is project which use discrete TPM, so add discrete TPM and disable cr50 in overrideree. BUG=b:187094464 TEST=FW_NAME=haboki emerge-keeby coreboot chromeos-bootimage Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I08f2a562c3f62c60402350151ea260b70890a744 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-08-12soc/intel/tgl: Allow setting PCIe subsystem IDs after FSP-STim Crawford
Prevent the FSP from writing its default SVID SDID values of 8086:7270 for internal devices as this locks most of the registers. Allows the subsystemid values set in devicetree to be used. A description of this SSID table override behavior, along with example code, is provided in the TigerLake FSP Integration Guide, section 15.178 ("SI_CONFIG Struct Reference"). The xHCI and HDA devices have RW/L registers rather than RW/O registers. They can be written to multiple times but cannot be modified after being locked, which happens during FspSiliconInit. Because coreboot populates subsystem IDs after SiliconInit, these devices specifically must be written beforehand or will otherwise be locked with their default values of 0:0. TGL also introduces parameters for customizing the default SVID:SSID. These must be set or it will still use the FSP defaults. Tested by checking lspci output on System76 darp7 (TGL-U). References: - b1fa231d76a ("soc/intel/cnl: Allow setting PCIe subsystem IDs after FSP-S") - TigerLake FSP Integration Guide - Intel Document #631120-001 Change-Id: I391b9fd0dc9dda925c1c8fe52bff153fe044d73e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-08-12mb/google/brya/variants/redrix: enable LTE PCIe portWisley Chen
Enable LTE PCIe port according to fw config. BUG=b:192052098 TEST=emerge-brya coreboot chromeos-bootimage Change-Id: Ic9472d2249c622858a75c63bc82e8e4e8166a3d7 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56894 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12mb/google/brya/variants/redrix: add mipi camera supportWisley Chen
Add mipi camera support by selecting the Kconfig symbols and adding it to the devicetree with ACPI UID 0x50000 and name IPU0. BUG=b:192052098 TEST=checked mipi camera works Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I69281f36ddbc1abf9905c8db9287500f9aa995c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56893 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12mb/google/brya/variants/gimble: Update GPIO for PP1800 DMIC enableMark Hsieh
add GPP_D16 in gimle gpio.c and set value to 1 for PP1800 DMIC init sequence BUG=b:195968649 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ia0639162e2c3f02f622470fa16c21fe8a067cf7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56889 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12MAINTAINERS: Add Tim Crawford as a maintainer for System76Tim Crawford
Change-Id: I8aa9ee1627bf319660b193b4602d8c2d0b562424 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52580 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12mb/google/trogdor: Add new variant WormdinglerZanxi Chen
New board introduced to trogdor family. BUG=b:193870279 BRANCH=none TEST=make Change-Id: If3d9662e8725e30e1308d77b05545efbee29f846 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-08-11mb/google/brya/variant/taeko: Update devicetree settingsJoey Peng
Based on schematic and gpio table of taeko, generate overridetree.cb settings for taeko. BUG=b:195494281 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I96aaf48284a226edc39115f870bf0f3dd83ab8b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-11soc/intel/alderlake: Implement report_cache_info() functionSubrata Banik
Make use of deterministic cache helper functions from Alder Lake SoC code to print useful information during boot as below: Cache: Level 3: Associativity = 12 Partitions = 1 Line Size=64 Sets=16384 Cache size = 12 MiB Change-Id: I30a56266015d69abccb885b3f230689488ee0360 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-11arch/x86: smbios write 7 table using deterministic cache functionsSubrata Banik
This patch makes use of deterministic cache helper functions, for example: cpu_get_cache_type(), cpu_get_cache_level() etc. helper functions from arch/x86/cpu_common.c file. Also, changed argument for get_number_of_caches() function that receives cpu_get_max_cache_share() data directly. Drop unused variables partitions, cache_line_size and number_of_sets as struct cpu_cache_info.size would provide the cache size directly. TEST=Able to dump SMBIOS Table 7 with this CL, no changes seen in output. Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0005, DMI type 7, 27 bytes Cache Information Socket Designation: CACHE1 Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Unknown Location: Internal Installed Size: 288 kB Maximum Size: 288 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Data Associativity: 12-way Set-associative Handle 0x0006, DMI type 7, 27 bytes Cache Information Socket Designation: CACHE1 Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Unknown Location: Internal Installed Size: 192 kB Maximum Size: 192 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Instruction Associativity: 8-way Set-associative Handle 0x0007, DMI type 7, 27 bytes Cache Information Socket Designation: CACHE2 Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Unknown Location: Internal Installed Size: 1280 kB Maximum Size: 1280 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unified Associativity: Unknown Handle 0x0008, DMI type 7, 27 bytes Cache Information Socket Designation: CACHE3 Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Internal Installed Size: 12288 kB Maximum Size: 12288 kB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unified Associativity: 12-way Set-associative Change-Id: Iedbd3b745629dea57c3ad6b0d187eab2bcc3f7d3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-11arch/x86: Helper functions to get deterministic cache parametersSubrata Banik
This patch creates helper function that internally detects the CPU type (AMD or Intel) and pick the leaf to send CPUID instruction with different cache level to retrieve deterministic cache parameters. Lists of helper functions generated as part of this CL : 1. cpu_check_deterministic_cache_cpuid_supported => if CPU has support for deterministic cache using CPUID instruction. 2. cpu_get_cache_ways_assoc_info => Get cache ways for associativity. 3. cpu_get_cache_type => Get cache type. 4. cpu_get_cache_level => Get cache level. 5. cpu_get_cache_phy_partition_info => Get cache physical partitions. 6. cpu_get_cache_line_size => Get cache line size. 7. cpu_get_cache_sets => Get cache number of sets. 8. cpu_is_cache_full_assoc => Check if cache is fully associative. 9. cpu_get_max_cache_share => Cores are sharing this cache. 10. get_cache_size => Calculate the cache size. 11. fill_cpu_cache_info => Fill cpu_cache_info structure. Change-Id: I0dd701fb47460092448b64c7fa2162f762bf3095 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-10mb/google/dedede/var/cret: Fix DPTF passive and critical policiesDtrain Hsu
TSR2 thermal sensor doesn't define in cret. Fix DPTF passive and critical policies for getting negative temperatures in OS. BUG=b:195868075 BRANCH=dedede TEST=Build and boot to OS in cret. Ensure that the DPTF entries look correct in both static.c and SSDT tables i.e. passive and critical policies for applicable devices only are present. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I849662cbb3adc8e528d65af2c90e7c8e4880d607 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-10mb/intel/adlrvp: create dynamic power limits mechanism for thermalSumeet Pawnikar
Add dynamic power limits selection mechanism for aldrvp board. BUG=None BRANCH=None TEST=Build FW and test on adlrvp with DPTF tool On adlrvp (282): Overriding DPTF power limits PL1 (3000, 15000) PL2 (55000, 55000) On adlrvp (682): Overriding DPTF power limits PL1 (5000, 45000) PL2 (115000, 115000) Change-Id: Id1aef0125c6e1e105665172f19bda271e232d94f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-10mb/google/brya/variants/primus: Remove DPTF fan controlScott Chao
BUG=b:195901486, b:195387997 BRANCH=none TEST=Check fan is able to control by EC Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: If758d75ff24c88c9eaf0de90ac0ef08d172a2edd Reviewed-on: https://review.coreboot.org/c/coreboot/+/56879 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-10mb/system76/oryp6: Enable TAS5825M smart ampTim Crawford
Allows using the internal speakers of the oryp6. Smart AMP data was collected using a logic analyzer connected to the IC during system start on proprietary firmware. This data is then used to generate a C file [1]. [1]: https://github.com/system76/smart-amp Change-Id: I57781a7223a52b8fc5295cf686412926529c3a7f Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-10mb/*/{brya,adlrvp}: move cpu_cluster static configuration to chipset.cbMAULIK V VAGHELA
For mainboard devicetree, it always have definition for enabling cpu_cluster 0 which is required for all the variants. Since it is SoC related settings, it's better to keep in chipset.cb as a common setting for all the mainboards using the same SoC. BUG=None BRANCH=None TEST=Change has no functional impact on the brya board. Change-Id: I8f7c3184b62f8d84ca4605fb9f2a1cc569f1f964 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56853 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-10mb/*/brya/adlrvp: Remove hardcoding of BSP APIC IDMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will be 0 and core enumeration logic will look for lapic id from the mainboard. As per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, this assumption might not hold true and we may have any other core as BSP. To handle this, we need to remove hardcoding of APIC ID 0 from mainboard. BUG=None BRANCH=None TEST=Check if there is no functional impact on the board. Change-Id: Ibc60494b0032a3139c1e6c79251fb2da750c8de8 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-08-10mb/google/hatch/scout: Update DPTF parametersKenneth Chan
update the DPTF parameters received from the thermal team. BUG=b:195602767 TEST=emerge-ambassador coreboot Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I5dc89d1d4c2b64c9aac780a7db743a91fd0ebc9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jeff Chase <jnchase@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-10mb/google/dedede/var/cappy2: Add fw_config probe for multi audio codecSunwei Li
Compatible headphone codec "Realtek ALC5682I-VD" and "cirrus CS42L42" Compatible AMP codec "ALC1015Q-VB" and "MAX98360" BUG=b:193373320 BRANCH=dedede TEST=Both realtek and cirrus audio codec can work normally Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: I9121e75eaf46b43e6dc5ef2e31029a153c7a807d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-08-10mb/google/brya/variant/taeko: Update memory settingsJoey Peng
Based on the Taeko's schematic, generate memory settings. BUG=b:161089195 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I4e23c28aaf20d9e52b43033b4e41c751e26872bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/56766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-09mb/google/dedede/var/storo: Fixed iasl can not run on DutTao Xia
The TSR1._PSV has been redefined. It will report errors when disassembling the ACPI tables with the iasl. It is OK when Removing the TSR1._PSV and adding the TSR0._PSV BUG=b:194509417 BRANCH=dedede TEST=The iasl can run on Dut successfully Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I524255c79d3c71573d122944da5058389f79d95d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-08-09mb/intel/adlrvp: Support VBT binaries for LP4 and LP5Bernardo Perez Priego
This will enable to include multiple VBT binaries in a single image and load corresponding file according to HW configuration. BUG=None TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Iace0e5e0783b2074393a537da8cc645102d2acda Reviewed-on: https://review.coreboot.org/c/coreboot/+/55969 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09mb/amd/bilby: Set Clk always on for x4 and x8 external PCIe SlotAamir Bohra
Keep the clock source for PCIe slots as always on. Also turn off the unused (0/1/5/6) clock sources. Currently bilby only uses clock sources 2, 3 and 4, out of which clock source 3 and 4 are routed for PCIe external slot. And clock source 2 is routed for M.2 PCIe slot. TEST:Verify end devices enumerate on D:F 1.1/1.2 RPs over warm reboot. Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Change-Id: Ida485b06279b0a8659c8d00873c3d6023d1e542f Reviewed-on: https://review.coreboot.org/c/coreboot/+/56826 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09util/spd_tools/lp4x: Update READMETim Wawrzynczak
The lp4x spd_tools also support Alder Lake (ADL), so update the the README to reflect this fact. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iedb1ea1c3558e5f179feac2c725667db5b327b2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09tests/Makefile.inc: Add function wrapping mechanismJakub Czapiga
This patch extends mocks functionality to allowing wrapping of mocked functions. Original function name will be prefixed with `__real_`. Example: - Mocked function: cbfs_lookup() - New function name: __real_cbfs_lookup() - Mock name: cbfs_lookup() Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I7cd0d66a17029955cbf75c8b155a7ebb7f5513aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/56719 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09mb/google/brya/variants/taeko: Configure GPIOs according to schematicsJoey Peng
Update initial gpio configuration for taeko BUG=b:195252436 TEST=FW_NAME=taeko emerge-brya coreboot Change-Id: Ida1edbf874c93f6efac45c276920ead9311ac6f2 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-09mb/google/brya/variants/brya0: set power limits for thermalSumeet Pawnikar
Set power limits for brya0 variant board based on CPU SKUs which is detectable at runtime. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 variant board with below messages, On brya (282): Overriding DPTF power limits PL1 (3000, 15000) PL2 (39000, 39000) On brya (482): Overriding DPTF power limits PL1 (4000, 28000) PL2 (43000, 43000) Change-Id: I4c07319af756b10e5d22f320e97ff956fb4a14c6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56622 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09gimble: enable elan touchscreenScott Chao
Enable Elan touchscreen and remove Goodix touchscreen. We also get confirmation by Elan that address is 0x15. BUG=b:195494292 BRANCH=none TEST=build coreboot and dmesg | grep hid, it showed i2c-ELAN9050:00. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I20a7fd0b370803c14990b77bab302727af197ccb Reviewed-on: https://review.coreboot.org/c/coreboot/+/56801 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09soc/intel/common/pcie/rtd3: Update _S0W to use symbol instead of 4Tim Wawrzynczak
The code is clearer when ACPI_DEVICE_SLEEP_D3_COLD is used instead of the number 4. Change-Id: I4b0ade1cd0b4b9cdb59f90f8d455269d0b69ed86 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-09drivers/uart/acpi: Update _S0W return value to D3hotTim Wawrzynczak
In order to support wake from D3cold, most devices require extra circuitry and possibly out-of-band communications to the host. Therefore, assume that most UARTs that do have wake capabilities support wake from D3hot rather than D3cold. BUG=b:187228954 TEST=compile Change-Id: I24d6d0e81d980fc9c910d8f47f557c88990b6400 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-09drivers/spi/acpi: Update _S0W return value to D3hotTim Wawrzynczak
In order to support wake from D3cold, most devices require extra circuitry and possibly out-of-band communications to the host. Therefore, assume that most SPI peripherals that do have wake capabilities support wake from D3hot rather than D3cold. This also allows coreboot to expose a power resource to perform power sequencing for a SPI peripheral that is intended to retain power in S3/S0ix. If support for a device with d3cold wake support is needed, it could be added in later as an option. BUG=b:187228954 TEST=compile Change-Id: I1d739b49c1a43007eb0199fe39b3b7d7375e6577 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-09drivers/i2c/da7219: Update _S0W to D3hotTim Wawrzynczak
The DA7219 does not support wake from D3cold, therefore update the return value of _S0W from D3cold to D3hot. BUG=b:187228954 TEST=compile Change-Id: If03f83bb00ec90a2a6646d2c99d8bcc7e5533ac2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-09mb/google/brya: create dynamic power limits mechanism for thermalSumeet Pawnikar
Add dynamic power limits selection mechanism for brya board based on CPU SKUs which is detectable at runtime. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya with below messages, On brya (282): Overriding DPTF power limits PL1 (3000, 15000) PL2 (39000, 39000) On brya (482): Overriding DPTF power limits PL1 (4000, 28000) PL2 (43000, 43000) Change-Id: I86619516adeec13642f02ba7faf9fc4945ad774e Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-09elogtool: add to gitignoreJack Rosenthal
Add the binary output of the new elogtool to the .gitignore, so that running "make -C util/cbfstool" keeps the tree clean. Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I806338a4b33abbc3d55e4edef2736c19d56fa005 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricardo Quesada <ricardoq@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-09mb/system76/oryp6: Drop DIMM_SPD_SIZETim Crawford
The board uses the default size specified in the SoC. Change-Id: Ie71a0fea1ff9de6c4f1ce8db2db09bb3cd35d04d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-08-09MAINTAINERS: Add System76 as maintainer for TAS5825MTim Crawford
Change-Id: I302e408fa9479e7fc03f344f092e145dd2b86ba5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52581 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09mb/*/jslrvp/dedede: Remove hardcoding of BSP APIC IDMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will be 0 and core enumeration logic will look for lapic id from the mainboard. As per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, this assumption might not hold true and we may have any other core as BSP. To handle this, we need to remove hardcoding of APIC ID 0 from mainboard. BUG=None BRANCH=None TEST=Check if there is no functional impact on the board. Change-Id: I726d70b4ffc35a28a654abbd20c866f1410e1aee Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-09soc/intel/common/cpu: Handle non-zero BSP APIC ID in init_cpusMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will always be 0 but as per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, it says that BSP can be any processor whose index/APIC ID might not be 0. To handle this situation, init_cpu call is required to modify to handle dynamic detection of APIC ID from BSP instead of hardcoding always through devicetree. Function has been updated to create a new node with actual BSP APIC ID when devicetree doesn't contain APIC ID defined. In case APID ID is defined, function will use a node with the APIC ID defined in devicetree. Changes also requires to remove "lapic 0" hardcoding from devicetree to allow code to fill BSP APIC ID dynamically. Otherwise coreboot will create an extra node for CPU with APIC ID 0 and it'll show as a extra node in kernel. This will cause kernel to report wrong (extra) core count information then actually present. BUG=None BRANCH=None TEST=Boot the JSL system and observe there is no functional impacts. Without this CL kernel core count in `lscpu` = 3 With this CL, kernel core count is corrected to 2. Change-Id: Ib14a5c31b3afb0d773284c684bd1994a78b94445 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-09vc/mediatek/mt8195: Optimize DRAM init time by reducing I2C I/ORyan Chuang
Disable reading of vdram/vddq/vmddr to reduce access of I2C to reduce DRAM init time by about 30ms. The values were only needed by HQA report and not needed on production units. BUG=b:195274787 Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I32cd68fb8b52cec6e145d6772475fde0130ca6ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/56850 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09vc/mediatek/mt8195: Optimize DRAM init time by limiting frequency countRyan Chuang
Support the config MEDIATEK_DRAM_DVFS_LIMIT_FREQ_CNT to limit DRAM frequency counts to reduce DRAM initialization time by about 100ms. BUG=b:195274787 Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Ibcb9a50c24f428358ef682b64946d4c91ebd81d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09payloads/libpayload: add MTK_TIMER_V2 configRex-BC Chen
The timer structure (in particular, the offset to memory addresses) on recent MTK SoCs for example MT8195 has been changed. BUG=b:195274787 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ifd6ff65a825c4309c47f3b115b80a8ecd42fedac Reviewed-on: https://review.coreboot.org/c/coreboot/+/56845 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09mb/google/cherry: Improve boot time by raising little CPU frequencyRex-BC Chen
Raise little CPU to 2GHz at romstage to improve boot time by about 100 ms. BUG=b:195274787 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Id6aac8f9db86a6c1e61ea94863f2cbde12c0482e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09soc/mediatek/common: add mt6359p vcore supportJames Lo
Add mt6359p vcore set/get support. To adjust frequency of little core, we need to adjust voltage of vcore. Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: Ibf49390ba78870b834c6d0b64e3f0f30f3494f18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09mb/google/cherry: early-init eMMCWenbin Mei
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to access eMMC in the very early stage (for example, Depthcharge needs it 20ms after started) so we have to start initialization in coreboot. BUG=b:195274787 TEST=emerge-cherry coreboot BRANCH=cherry Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: Idc86f9121fa4a34f09a683f7a81087c13ea3dd42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09mb/google/cherry: select mmc storage configWenbin Mei
Select mmc storage config for cherry. BUG=b:195274787 TEST=emerge-cherry coreboot BRANCH=cherry Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I67c8795b6e6fc121e8fe61c40da05593faa02d94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-06mb/google/auron/var/lulu: Uniformise dual-channel handlingAngel Pons
Lulu is the only variant that does not disable channel 1 in pei_data when the SPD index indicates it is unused. For consistency with the other variants that use SPD files, disable channel 1 explicitly. Change-Id: I8c613c5d90075495d2f76d33abf15d74ac63c125 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55802 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-06mb/google/dedede/var/cappy2: Add camera supportSunwei Li
Add camera support in devicetree and associated GPIO configuration. BUG=b:193397569 BRANCH=dedede TEST=Camera function is OK Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: I3275ab408f6a03735a35eaa8025c36df09c9898c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-06ec/google/chromeec: Add code for KEY_MICMUTE and KEY_KBD_BKLIGHT_TOGGLEScott Chao
- Chromebook have some platform need support MICMUTE and KBDILLUMTOGGLE. - Sync ec_commands.h This change syncs the coreboot version of google ec_commands.h with the ec_commands.h from the google ec repository. This is a straight copy except for the the copyright header. BUG=b:194146863 BRANCH=none TEST=check on evtest type 4 (EV_MSC), code 4 (MSC_SCAN), value 9e type 1 (EV_KEY), code 228 (KEY_KBDILLUMTOGGLE), 1 type 4 (EV_MSC), code 4 (MSC_SCAN), value 9b type 1 (EV_KEY), code 248 (KEY_MICMUTE), value 1 Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: Ie4fa3e627f448265f72279704d258b2d3fe8fc17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56710 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-06arch/x86/acpi: rename KEY_KBDILLUMTOGGLE to KEY_KBD_BKLIGHT_TOGGLEScott Chao
Also change scan code from e02b to e01e. This is trying to fill the gaps in the standard table. The advise from Googler is using e01e for the keyboard backlight toggle key. BUG=b:194146863 BRANCH=none TEST=check on evtest Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I402192ff354f30da35aec43202df9f1407911d34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56763 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-06util/kconfig: detect ncurses on FreeBSDIdwer Vollering
Even though pkg-config might be installed, it might or will not return true in the checks whether 'PKG' or 'PKG2' is installed. Extend the script to look in another location for ncurses.h Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: I4344ba2116c0b8618357db4248d993509cbb666e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2021-08-06soc/mediatek/mt8192: initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values could be showed for debugging. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I39a4391c1d1e832d77b709f8f899bb1c6dcacd69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-06mb/prodrive/hermes: Update HDA codec subvendor IDAngel Pons
Tested on prodrive/hermes. Change-Id: I72be8bde59d9eb0c1eff8c65dc734c6805732e09 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56086 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: <wouter.eckhardt@prodrive-technologies.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-05soc/amd/common/block/spi: Enable host burst to 4 DWORD when using DMAKarthikeyan Ramasubramanian
Disabling the 4 DWORD bursts causes SPI DMA operations to stall, so leave it enabled when SPI DMA is used. BUG=b:194919326 TEST=Build and boot to OS in Guybrush. Change-Id: I363acdcdb4178a10e4f7eb2bbcbd6d0ca7924f2d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-08-05soc/amd/common/block/spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURSTFelix Held
Add a new Kconfig option to enable or disable the 4 DWORD burst support of the SPI controller and use this setting to determine if the corresponding feature bit in SPI100_HOST_PREF_CONFIG will be set or cleared. Since fch_spi_disable_4dw_burst can now enable or disable the feature, rename it to fch_spi_configure_4dw_burst. On Stoneyridge the SPI_RD4DW_EN_HOST bit needs to be cleared (see the Rd4dw_en_host bit definition in the SPIx2C SPI100 Host Prefetch Config register in the public BKDG #55072 Rev 3.09), so add a SoC dependency to the Kconfig option. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id754fa8d5f9554ed25cf9f3341bfdd1968693788 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-08-05util/elogtool: add tool to print elog eventsRicardo Quesada
Add a new tool that that prints elog events. The tool, as input, accepts either a file with the RW_ELOG contents, or if the file is not provided it reads the contents of RW_ELOG by calling the "flashrom" tool. The tool is based on "mosys eventlog list"[1]. For the moment it only supports "list", but future commits will add additional functionality. This commit also adds missing ELOG defines needed for the tool. These defines are added with the rest of the ELOG defines, in include/commonlib/bsd/elog.h The tool is placed inside util/cbfstool. The rationale behind the decision, is that this tool shares a lot in common with the other tools located in cbfstool: vboot dependency, shared files like common.o and valstr.o, and in spirit is similar to some of the tools located in cbfstool/. As an example, you call the tool like the following: $ elogtool list -f rw_elog_dump.bin [1]: https://chromium.googlesource.com/chromiumos/platform/mosys/+/refs/heads/main/lib/eventlog/elog.c BUG=b:172210863 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Change-Id: Ia1fe1c9ed3c4c6bda846055d4b10943b54463935 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
2021-08-05Move ELOG defines/struct to commonib/bsd/elog.hRicardo Quesada
Move ELOG defines and structs from include/elog.h to include/comonlib/bsd/elog.h. This is needed because the will be used from util/ (in a future commit). It also replaces uNN types with uintNN_t types, for the reason described above. BUG=b:172210863 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Change-Id: I4f307f599a311810df2367b7c888f650cff1214a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-05soc/intel/alderlake: Add GFx Device ID 0x46aaBora Guvendik
This CL adds support for new ADL-M graphics Device ID 0x46aa. TEST=boot to OS Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib24b494b0eedad447f3b2a3d1d80c9941680c25d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-05mb/intel/adlrvp: Add probed fw_configs to SMBIOS OEM stringsAnil Kumar
This feature was added in ADL-M RVP for discovering correct audio topology using OEM string e.g., "ADL_MAX98373_ALC5682I_I2S" for discovering boards having audio expansion card Bug=None Test= With CBI FW_CONFIG set to 0x100 localhost /home/root # dmidecode -t 11 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0009, DMI type 11, 5 bytes OEM Strings String 1: ADL_MAX98373_ALC5682I_I2S Change-Id: I05887d9d654eae6d9d2da731d8ab4cf4a05c287f Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55368 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-05mb/intel/adlrvp_m: Enable SaGv supportBora Guvendik
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I80f11b8f0c2a1fdccbc322c3c4783c61684ff37a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55634 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-05mb/google/brya/variants/gimble: add TcssAuxOriScott Chao
Gimble don't have retimer on port0, the port need to be configured for the SOC to handle Aux orientation flipping. Also add "typec_aux_bias_pads" lets the SoC IOM firmware control the Aux DC bias voltages. BUG=b:195087071 BRANCH=none TEST=check both orientation can output display on type-c monitor. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I057048c14110bb81bf5b5fd0e3151deb031ca5d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-05mb/amd/majolica:Enable IOMMU Device for majolicaJason Glenesk
Enable IOMMU PCIe device. BUG=b:194173037 TEST=lspci shows IOMMU device 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1631 Cq-Depend: chrome-internal:4027293,4027294 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: Ia84276ca98163158d818a0efc3e021b93ab365de Reviewed-on: https://review.coreboot.org/c/coreboot/+/56771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-05soc/amd/cezanne/fsp_m_params:Configure the iommu_support UPDJason Glenesk
Configure the IOMMU support upd if iommu is enabled. BUG=b:194173037 Cq-Depend: chrome-internal:4027293,4027294 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: I56b433cdc1ca5459c51b4b764e22292bd27b8892 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-05soc/amd/cezanne: Generate IVRS for cezanneJason Glenesk
Generate IVRS for cezanne using common IVRS generation code. BUG=b:190515051 TEST=Build cezanne coreboot image. Compare IVRS table with agesa generated tables. Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: Ie15addba62ec7da25a7452512b6871e46c61b0a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-05soc/amd/picasso: Move IVRS generation code to commonJason Glenesk
Move IVRS acpi table generation code to common, so that it can be shared by other programs. BUG=b:190515051 TEST=Build picasso coreboot image. Compare IVRS tables before/after change. Change-Id: Icd5fec3a9d66e8301e267312020e726d9bc1aa70 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-05mb/google/dedede: Create bugzzy variantRaymond Chung
Create the bugzzy variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:192521391 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_BUGZZY Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Change-Id: I851b9a75c387586d2fb84b762788e962f33472b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56762 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-05mb/google/brya/variants/primus: enable PS2 interfaceCasper Chang
BUG=b:187969783 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I1e063524cfa4121c38cfed23e95557953511d884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-05util/kconfig: Provide default for DEFCONFIGPatrick Georgi
Our documentation claims that the DEFCONFIG make variable, used for targets such as savedefconfig, defaults to 'defconfig'. With the update to kconfig 5.13 we lost this default, so bring it back. Fixes: 53ea1d44f0 ("util/kconfig: Uprev to Linux 5.13's kconfig") Resolves: https://ticket.coreboot.org/issues/317 Change-Id: Idb88b69ffa855fa97df8c821601308e717575550 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56718 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-04MAINTAINERS: Update vboot maintainersJulius Werner
Add current maintainers for vboot-related code, and combine the vboot and vboot2 sections which are not really separate anymore. What's left in vendorcode/google/chromeos isn't really related to vboot anymore since the vboot code was moved under src/security, so take it out of there. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I59a2df9c1580291a6d29537868aab0e1b339a2ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/56728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-04mb/google/brya/variants/gimble: Remove DPTF fan controlScott Chao
BUG=b:195378817 BRANCH=none TEST=Check fan is able to control by EC Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I84c020e470194072bb796f75f8a1304832504469 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56768 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-04mb/google/dedede/var/magolor: Modify SSFC for camera and touchscreenRen Kuo
The all shipped magolor and maglia has SSFC= 0x840. The value is defined as 5M MIPI camera.But the value:0x840 will conflict with the updated touchscreen field. It will cause some touchscreen no function if make auto-update new firmware.The CL would correct the field error. The original fields: CAMERA_WFC 38 40 TS_SOURCE 41 44 Correct fields: MIPI Cam CAMERA_WFC 38 40 CAMERA_UFC 41 42 CAMERA_VCM 43 44 Touch-screen TS_SOURCE 45 48 The SSFC value of Magolor: CAMERA_OVTI5675 5M AF (SSFC = 0x840) CAMERA_OVTI8856 8M AF (SSFC = 0x880) BUG=b:194639170 TEST=Build firmware and verify on camera and touch-screen devices Change-Id: I13d76ce8b932f483e20ca5388f1c67eb39ba12a1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56685 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-04mb/amd/bilby: Add support for HDMI displayAamir Bohra
DDI 0/1 ports are shared for DP and HDMI. This implementation adds support for HDMI display when HDMI is set as connector type in ddi descriptors. TEST=verify display over HDMI(0 and 1) in OS. Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Change-Id: I9697211c556f12d1fc0d49418b227fbe6b342673 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-04acpi/acpigen_ps2_keyb: Align comments using tabsPaul Menzel
Fixes: ffd80fd2 ("arch/x86/acpi: Add code for KEY_MICMUTE and KEY_KBDILLUMTOGGLE") Change-Id: I2cca8cdbbd3607acca88da7b273ca6b080db9e7c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-04mb/google/brya/variants/gimble: Update overridetree for gimbleMark Hsieh
According to the schematic diagram of proto, added drivers/i2c/max98390 to device ref i2c0 and deleted device ref hda. BUG=b:191811888 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I0f0a8c84db3fbc963797d11246c5d31b395bb744 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-04Move elog_internal.h to commonlib/bsd/includeRicardo Quesada
Move elog_internal.h to commonlib/bsd/include/bsd/. And rename it from elog_internal.h to elog.h. Since this file will be included from util/ it also converts the "uNN" types into "uintNN_t" types. The two defines that are not used by util/ are moved to drivers/elog/elog.c, the only file that includes them. Move also the function elog_verify_header() from drivers/elog/, to commonlib/bsd/elog.c since this function will be called from util/ as well. The rationale behind moving elog's defines & structs to commonlib/bsd/include is to make them available to util/ tools and/or payloads (should it be needed in the future). The files that are being relicensed to BSD were coded by Duncan Laurie, and he is Ok with the relicense. BUG=b:172210863 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Change-Id: Ia1aefea705ddd417a1d9e978bb18ab6d9a60cad6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-04Move post_codes.h to commonlib/console/Ricardo Quesada
Move post_codes.h from include/console to commonlib/include/commonlib/console. This is because post_codes.h is needed by code from util/ (util/ code in different commit). Also, it sorts the #include statements in the files that were modified. BUG=b:172210863 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Change-Id: Ie48c4b1d01474237d007c47832613cf1d4a86ae1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56403 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-04mb/amd/bilby: Enable DP2 and DP3 enumerationAamir Bohra
DP2 and DP2 is muxed with USBC port. This implementation configures mux for DP functioanlity. TEST=Verify display over DP2 and DP3. Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Change-Id: If0c8dfbb47175789bb27d4506c1e8b45c425c76a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ritul guru <ritul.bits@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-04console/hw-debug_sink: Update for fast/slow console distinctionNico Huber
Change-Id: I9ac110c7b812f912f0f87cbe4aa218d4a78e6aaf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-04soc/intel/cannonlake: Allow to configure maximum package C stateNico Huber
Sometimes it's preferable or even necessary (e.g. stability issues) to limit the maximum package C state. Let's add a devicetree option that keeps the current behavior if it is left unset. Change-Id: I0dc254d34f46de4c65cb85cc92e4b7f26618888d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-04soc/intel/cannonlake: Disable `TccOffsetClamp` if no offset is givenNico Huber
Change-Id: I4f9b62fd944d8a91d53bc584c88797f23de1e5ca Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-04soc/intel/cannonlake/vr_config: Print configured valuesNico Huber
These values are quite important and our default tables sometimes have holes. We should at least make it visible what the resulting settings are. Change-Id: Ic716d073da1c2638c4b16f2eac01b83a0768d22f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-04soc/intel/cannonlake/vr_config: Add TDC values for CFL-H 6+2Nico Huber
Values were taken from PDG (571391), 51.3 IMVP8 Voltage and Current Requirements. Change-Id: Iffa29386cb7da333353dafd0ba3a61ca61a0ccac Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-04soc/mediatek/mt8195: Add devapc basic driversNina Wu
Add basic devapc (device access permission control) drivers. DAPC driver is used to set up bus fabric security and data protection among hardwares. DAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DAPC driver. 1. Initialize devapc. 2. Set master domain and secure side band. 3. Set domain remap. 4. Set default permission. Change-Id: I3677657a117caed0d73526f78b0ebe8180148335 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-033rdparty/qc_blobs: Uprev to new HEAD (98db386)Shelley Chen
Now that gsi_fw blob has landed, need to uprev the qc_blobs. Change-Id: I0bf67a560ee2e5d771bdb71b60e3d3d372dad567 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56776 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-03mb/google/brya: Add RTD3 for WWANThejaswani Putta
Enable the PCIe RTD3 driver for WWAN device attached to PCIe Root Port 6 and provide the reset GPIO / src clk pins. BUG=None BRANCH=None TEST=Build and boot the coreboot image, check if device is enumerated in the lspci list after warm/cold reboot cycles, run suspend cycles and check if WWAN is entering L2 LPM. Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: Ie9d1ce55cc1297ea0e1069979bbecfaac8f8de05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-08-03sc7180: Add display support for mipi panelsVinod Polimera
- configure TROGDOR_HAS_MIPI_PANEL to "n" by default, it can be updated for mipi panels. - add simple rm69299 panel as an example to append new mipi panels. - use existing edid struct to update mipi panel parameters. - add dsi command tx interface for mipi panel on commands. Change-Id: Id698265a4e2399ad1c26e026e9a5f8ecd305467f Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52662 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-03mb/google/brya/variants/primus: configure correct type-c portScott Chao
BUG=b:195274799 TEST=USE="project_primus" emerge-brya coreboot and verify it builds without error. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I4abf7b2d98b188735ef79f8ffbee4c02099ec021 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56583 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-03soc/intel/*: Allow configuring 8254 timer via CMOSSean Rhodes
Currently, the `USE_LEGACY_8254_TIMER` Kconfig option is the only way to enable or disable the legacy 8254 timer. Add the `legacy_8254_timer` CMOS option to allow enabling and disabling the 8254 timer without having to rebuild and reflash coreboot. If options are not enabled or the option is missing in cmos.layout, the Kconfig setting is used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic82c7f25cdf6587de5c40f59441579cfc92ff2f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-03mb/google/brya: Introduce new baseboard braskZhuohao Lee
This patch initiates the brask setting which includes the gpio and device tree setting. BUG=b:191472401 BRANCH=None TEST=build pass Change-Id: I1bb42c7bb2492402de0810bc4ab2e8d8c0e2392b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-03Revert "mb/google/dedede/var/cret: Disable SDCard controller"Dtrain Hsu
This reverts commit f29437862269de24f85392d49f6afa6fa60ac43e. Reason for revert: It makes cret can't boot to os without depthcharge change. The depthcharge change related with fw_config and will effect other variants. BUG=b:194961854 TEST=Build and boot to OS. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I929369c9419375e74be61a4ff3e5566b0f41ce65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-03mb/google/brya: Disable crashlog on bryaMAULIK V VAGHELA
Crashlog is a debug feature and not used in normal mode of operation. Disabling this feature will allow us to disable unused IPs and also provide boot time savings of ~5-7 ms. BUG=b:195327879 BRANCH=None TEST=Platform boots and no function impact Change-Id: I1f7def4ea41ff7a566aada080be1e791c11766e6 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56654 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-03mb/google/brya: Create felwinter variantIan Feng
Create the felwinter variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:194431541 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_FELWINTER Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: Iff2b9daec40995a013f9fe0dd76ad667d1807d1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56765 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02mb/google/brya/variants/redrix: Init devicetree for redrixWisley Chen
Init basic override devicetree based on schematics BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Change-Id: I9fb752fe8280893b84c172d8a519578fa4220184 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 04:13:45 +0000