| Age | Commit message (Collapse) | Author |
|---|
|
Mainboard is codenamed Vida. I do not physically have this system;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. The VBT was obtained using
intelvbttool while running version A14 (latest available version) of the
vendor firmware.
Tested and found to boot as part of a libreboot build based on upstream
coreboot commit b7341da191 with additional patches, though these do not
appear to affect SNB/IVB. The base E6430 patch was tested against
coreboot main.
The EC is the SMSC MEC5055, which seems to be compatible with the
existing MEC5035 code. As with the other Dell systems with this EC, this
board is assumed to be internally flashable using an EC command that
tells it to pull the FDO pin low on the next boot, which also tells the
vendor firmware to disable all write protections to the flash [1].
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I570023b0837521b75aac6d5652c74030c06b8a4c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82131
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is PAL70/LA-6611P. I do not physically have this system;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. I was also sent the VBT binary,
which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
version A22 of the vendor firmware. This port has not been tested.
The EC is the SMSC MEC5055, which seems to be compatible with the
existing MEC5035 code. As with the other Dell systems with this EC, this
board is assumed to be internally flashable using an EC command that
tells it to pull the FDO pin low on the next boot, which also tells the
vendor firmware to disable all write protections to the flash [1].
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I5905f8c6a8dbad56e03bdeedc2179600d0c4ba46
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82130
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make sure size vbt_size is initialized. GCC LTO warns about this.
Change-Id: I4fcc6c02f898640e9b40d769e1165a4a0fb0fdf2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84041
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
The clang compiler warns about undefined behavior about shifting signed
integers.
Change-Id: Ic4ce64207393ec4a8d6b188b35e0f436342826de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Mainboard is Krug 14". I do not physically have this system; someone
with physical access to one sent me the output of autoport which I then
modified to produce this port. I was also sent the VBT binary, which was
obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
A02 of the vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I0283653156083768e1fd451bcf539b4e028589f4
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port. I was also sent the VBT binary, which was obtained
from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the
vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The value used is not acceptable to BFD linker.
Change-Id: I0f134a96c596d69e10dd441b96184b119e9f1908
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84013
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I41bb613de5d16ca180dd684a0bec4840d9119e6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84012
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows nvramcui to be build with clang.
Change-Id: I5e56ead81fc92b7ba4fb63a2c098b0e10b01ca53
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84010
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I81252dc2f89b3b3da0bb9a2388a041b600920b3f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84009
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes building with clang.
Change-Id: I2fabe7fbe3f8afac5c1128debf2e09a484f26fc5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I6cb0d717518478c35bc666867c7d0be957b89322
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Based on autoport. data.vbt extracted from a running system
using "intelvbttool --inlegacy"
Like with 8200 SFF, OEM firmware write-protects itself, but not
the IFD, GBE or ME regions when FDO jumper is applied. Therefore,
ME can be shrunken with me_cleaner and BIOS region moved there.
Tested:
- Internal flashing from the latest endor BIOS (v2.33)
- Sandy Bridge Pentium G630 CPU
- RAM: 8+0, 8+4, 8+8 1866MHz DDR3
- SeaBIOS 1.16.2, metest86+ v6, coreinfo, nvramcui & tint payloads
- libgfxinit txtmode & corebootfb
- VGA, DisplayPort (DVI monitor through an adapter)
- Gigabit Ethernet
- All front and back USB ports
- Booting Void Linux
- Rebooting
- Mini-PCIe WLAN (PCIe)
- Both SATA ports: 2.5" & DVD
- PS/2 keyboard and mouse
- Fan control
- TPM settings in SeaBIOS
Untested:
- Second Mini-PCIe slot (or is it mSATA): connector not present on my unit
- MXM graphics
Not working:
S3: it sleeps for a few seconds and wakes up on its own
Change-Id: I1cba7a5e664758eba7ea2ab8a55658b307d1d173
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79583
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested to still boot, SeaBIOS -> Void Linux
Change-Id: I03d57c7e76ccdfccd58b2a6deab4dee87b02503a
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79545
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Mainboard is Krug 15". I do not physically have this system; someone
with physical access to one sent me the output of autoport which I then
modified to produce this port. I was also sent the VBT binary, which was
obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
A14 of the vendor firmware.
This was originally tested and found to be working as a standalone
board port in Libreboot, but this variant based port in upstream
coreboot has not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port. I was also sent the VBT binary, which was obtained
from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the
vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82126
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. I was also sent the VBT binary,
which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
version A21 of the vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port.
I was also sent the vbios obtained using intel_bios_dumper while running
version A22 of the vendor firmware, which I then processed using
`intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt.
This was originally tested and found to be working as a standalone board
port in Libreboot, though this variant based port in upstream coreboot
has not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Instead of using defines for command IDs and argument values, use enums
to provide more type safety. This also has the effect of moving the
command IDs to a more central location instead of defines spread out
throughout the header.
Change-Id: I788531e8b70e79541213853f177326d217235ef2
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Undefined behavior in unit-tests is no fun. assert_string_equal()
expects properly zero-terminated strings. None of the encoded test
strings contain a termination, hence add it manually.
Without this change, the test was often failing with a wrong error
message:
[==========] tests_lib_b64_decode-test(tests): Running 1 test(s).
[ RUN ] test_b64_decode
[ ERROR ] --- "AB" != "AB"
[ LINE ] --- tests/lib/b64_decode-test.c:38: error: Failure!
[ FAILED ] test_b64_decode
[==========] tests_lib_b64_decode-test(tests): 1 test(s) run.
Probably due to unprintable characters in the string. No idea why
my system is more susceptible to this issue.
Change-Id: Id1bd2c3ff06bc1d4e5aa21ddd0f1d5802540999d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84088
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
LTO is not happy about signature mismatch.
Change-Id: Ia0c50224bd70503e884573fedf3bf33c134bba00
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84011
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Introduce a sandybridge-style devicetree setting for SPD addresses,
and use it instead of runtime code in mb_get_spd_map() for all
haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all
boards except google/slippy.
Patch also covers recently added Z97 boards using Broadwell MRC.
Also update util/autoport to match.
abuild passes for all affected boards.
autoport builds, but otherwise untested.
Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update generated FSP headers for ADL-N to MR5(5132_00)
Change-Id: I96fccbb92866fbc18c57187628612fda655cd7a7
Signed-off-by: KunYi Chen <kunyi.chen@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ia3fda208f5cb2e0d8a1e4da2c4392bc0f326d1ed
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84076
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807.
Reason for revert: We applied this patch for touchpad stuttering issue
for XOl, but the same touchpad problem was reported. So we would revert
this change and apply kernel patch (crrev/c/5808335) to avoid the
touchpad issue.
Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
By default, any URL with a scheme of "http", "https", "ftp", or "mailto"
is treated as an external link. Since the "ircs" scheme is not included,
the IRC link in community/forums.md does not get resolved as an external
link, and instead tries to link to a header in the docs themselves. Fix
this by explicitly defining which schemes should resolve to external
links using the myst_url_schemes configuration option [1], which is now
set to the default schemes along with "ircs".
This fixes the "cross-reference target not found" warning for
'ircs://irc.libera.chat/#coreboot'
[1] https://myst-parser.readthedocs.io/en/latest/syntax/cross-referencing.html#customising-external-url-resolution
Change-Id: I9e1c76b2bacbacaa06340f940c76b50de38e43e8
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84069
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Report upgraded version of binutils, GGC, CMake and LLVM.
Change-Id: I3690882a742cfe1800f20fdf23a836cb297bbe35
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84075
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add I2C controller driver.
TEST=build pass
BUG=317009620
Change-Id: I617ad8a43ce8b492b1a0e5dc06c1f0ffe7d92b5e
Signed-off-by: ot_hao.han@mediatek.corp-partner.google.com
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83927
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add watchdog support for MT8196.
TEST=build pass and WDT uart log
BUG=b:317009620
Change-Id: I9d5e71aa27d469855c2bd65abc5309d69a018750
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- Turn off L2C SRAM and reconfigure as L2 cache:
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
- Configure DMA buffer in DRAM:
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass, register(disable_l2c) read ok
BUG=b:317009620
Change-Id: I6a3cb63d3418f085f5d8d08b282dd59ea431c294
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83925
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Refactor mmu operation by
- moving mtk_soc_disable_l2c_sram to l2c_ops.c
- keeping mtk_soc_after_dram in mmu_cmops.c
Change-Id: I14bd8a82e0b5f8f00ce2b52e5aee918e130912d4
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83937
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize SPI NOR Flash Controller (SNFC) in the bootblock.
TEST=read nor flash data successfully.
BUG=b:317009620
Change-Id: I88960ce7a50f67ea6f402884b714cb205836a6d8
Signed-off-by: Noah Shen <noah.shen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83924
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add NOR-Flash drivers for flash read/write.
TEST=read nor flash data successfully.
BUG=b:317009620
Change-Id: Id0a19f0520020f16c4cf9d62da4228a5b0371b91
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83923
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce duplicate pad_func of MediaTek SoCs, move the pad_fun to a
common directory.
TEST=Build pass
BUG=b:317009620
Change-Id: I145233ef887a38251e8fc129b8357f236c5f7a2b
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Remove the weak function. Combine all the getting descriptors together.
BUG=b:279144932
TEST=Build
Change-Id: I981e9c52c8e5fa32296e2e43be47411557133691
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83646
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: Ic0e0864b99c5078e5b84b9183262b3c47ffcb329
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
When the config of MCU firmware blob such as CONFIG_SPM_FIRMWARE is
non-empty, we should always expect the file to exist. Similarly, since
the device is unlikely to boot without the DRAM blob (assuming MRC_CACHE
doesn't contain valid memory training data), dram.elf should always
exist as well.
Therefore, remove the check for the existence of the blobs. Build would
fail if any of the blobs is missing.
Change-Id: I755e7c5a70b34b0c3d3915ab339c65263688aad7
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84053
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will not succeed in compiling on all target and compiler
combinations but at least gets the ball rolling. The change is not
invasive.
Some notes:
- GCC has issues with LTO on ARM
- Clang uses LLD automatically on some arch
- Clang with LTO fails on x86 as it forwards the linking to GCC for some
reason
- SMM building succeeds but the binary is empty
Change-Id: Ieb9204777fd349542744a8946e2207731c37969c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG
for WIFI_CATEGORY to choose the right wifi_sar hex file.
Below is the file mapping:
wifi_sar_0.hex = wifi6
wifi_sar_1.hex = wifi7
BUG=b:345596420
TEST=emerge-nissa coreboot chromeos-bootimage
Cq-Depend: chrome-internal:7607427
Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id74ba772f105a5c36308b8e1dd803ae50840002b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I0bb1a2a84d81ec03c4468955926f3f0c94276203
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I6ffff766fb1fa91ad376c3e7e9aebe17c3288725
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83839
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1c9d1b2e336894ac48ce87e4d3390e9f9557d4f7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Sync checklist with release template; add new heading for paragraph
on pushing the signed tag to make it stand out.
Change-Id: Id49b3f38d3501382b7fb7ac791190c0cacd58a11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84034
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are the final release notes before the release is tagged. They
will be updated after the tag is in place with any differences,
including changing the "upcoming release" notice with the notice that
it has been released.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I449e8490d72976c8f723dc3b5ab3b77d7b16e3a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84046
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation for the upcoming release, add the template for the
24.11 release and update index.md.
Change-Id: I1e524f1db0090bf8815b08315f9cbc9894965af7
Signed-off-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84036
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Auto-generated by util/vboot_list/vboot_list.sh.
Change-Id: Ie2d3378e8995b09372291294f9ffb0d2d8eccc8b
Signed-off-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Modify DPTF parameters from thermal team.
1. Add TCHG.
2. Modify the charging limit.
BUG=b:360066326
TEST=Modify Thermal according to design requirements
Change-Id: Ia7050b552656a70da0c992e4f54b02ccb6a7c114
Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83929
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar
|
|
Add GPIO driver for other modules to control GPIO pins.
TEST=build pass
BUG=b:317009620
Change-Id: I6d1e6ef17660308c8de908697ffba6b5f17ff9ae
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83922
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce duplicate gpio_base.h in each SoC folder, move gpio_base.h to
mediatek/common folder.
TEST=Build pass
BUG=b:317009620
Change-Id: I815df8a3083cf04b821165ec834ca98ee71a0c78
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
TEST=build pass
BUG=317009620
Change-Id: I5dffdb9f3e4e7e0d49209e6012893cd246948ee8
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83987
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Iccmax of VccIn_Aux is 25A with MBVR design.
BUG=b:348258637
TEST=Local build successfully and boot to OS normally.
Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table.
BUG=b:358472598
TEST=Build and verified test result by EE team
Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some targets cannot be supported by clang as clang generates slightly
larger binaries which the hardware won't accept. This is usually the
case with CONFIG_CHROMEOS.
Change-Id: I88cf8ce16fb6c61c19d615e396f5871179b06fc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69747
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on nivviks, check BRDS is shown in SSDT.
Change-Id: I0908ff500434401bf89a5313427cf304f32cf929
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on revin, check BRDS is shown in SSDT.
Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The current region_end() implementation is susceptible to overflow
if the region is at the end of the addressable space. A common case
with the memory-mapped flash of x86 directly below the 32-bit limit.
Note: This patch also changes console output to inclusive limits.
IMO, to the better.
Change-Id: Ic4bd6eced638745b7e845504da74542e4220554a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
A few differences with the original link targets:
- 'libs' is now supported on all arch even though only x86 uses it
- compiler_rt is included on arch that previously did not (arm). This
however has no impact as there compiler_rt is not defined for those
arch in xcompile
- LIBGCC_FILE_NAME_bootblock is not included, but this was not defined
anywhere so this is a noop
Change-Id: I64f7686894c99732d06972e7ba327061db6d7c44
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83574
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes the boilerplate --oformat out of the makefile.mk
Change-Id: Ib78934fff4a31c4375da2038efca5027b813b07b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83999
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add the condition of unprovisioned fw_config to enable all storages
and devices. It's for first boot on all storags and preliminary test
in factory when fw_config is unprovisioned.
BUG=None
TEST=Build jubilant firmware and boot to OS on storages when fw_config
is unprovisioned and ensure all devices are enable.
Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Storage devices are very critical to boot to OS. When probe list is
defined for storage devices, all of them get disabled when fw_config is
unprovisioned - a typical situation in the factory. Fix this by
configuring the storage devices in device/override tree to probe and
enable them when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When fw_config is unprovisioned (eg. in the factory), devices that do
not have any probe list are enabled by default and those that have probe
list are disabled. On mainboards that support multiple types of boot
critical devices (eg. storage) through probing fw_config, all of
them are disabled when fw_config is unprovisioned. Hence the devices do
not boot to OS. Add sconfig fw_config rule `probe unprovisioned` to
enable such devices when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I178f821e077912776d654971924d67203a7c43df
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83983
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Since the voltage value measured by the USB2 pin of the wlan is 500mv,
it does not meet the design requirements. Adjusting the port length
can reduce the voltage to 450mv, which meets the expected settings.
BUG=b:361037189
TEST=1. The voltage measurements are as expected.
2. The Bluetooth and WiFi functions of the wlan module are
verified to be normal.
Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
|
|
Enables early serial console for debugging.
TEST=build/boot drobit, verify console output available starting in
bootblock on CPU UART (/dev/ttyUSB1) vs ramstage.
Change-Id: If94eb8caca3469143433fef06b972050f886be6a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These field defines are SOC-specific. The AUX bias virtual wire field
positons are shifted in PTL.
In MTL SOC and older:
7:0 GROUP_ID Group ID in PCH GPIO
10:8 BIT_NUM Data bit Position in PCH GPIO
23:16 VW_INDEX VW Index in PCH GPIO
In PTL SOC:
15:0 GROUP_ID Group ID in PCH GPIO; targeted SB_PORTID
18:16 BIT_NUM Data bit Position in PCH GPIO
31:24 VW_INDEX VW Index in PCH GPIO
BUG=361048817
TEST=boot to OS and use iotools to read AUX Bias Ctrl register to
verify the group ID, bit number, and vw index.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I0f9c895590465b2f539c91834cf331fcd7efa996
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83980
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
This mainboard does not have AT24RF08C (Asset Identification EEPROM) and
will show "*INVALID*" in the SMBIOS table.
Change-Id: If6f948bc4c63c7afdc8b31e1945d3c3beb99883f
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Icc5546a8073c03ce77480b634b367d10d1ad0111
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83992
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Iaa761108acbf275820ecbec9837b81bc5d64613e
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83991
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Enable Intel CrashLog diagnostic feature by default on all Google
Dedede variants.
BUG=b:354834461
TEST=Built for Google Dedede and verifed that CrashLog is enabled by
default.
Change-Id: Ib0487bd6a5bfdad2a80fd0787e009e48f4527d38
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Extend support for CrashLog to Intel Jasperlake based platforms.
This commit is based on 15cbc3b5996ae64aff2e4741c4c3ec3d7f5cc1a7,
originally reviewed on https://review.coreboot.org/c/coreboot/+/49943.
BUG=b:354834461
TEST=CrashLog can be enabled in Kconfig for Jasperlake based platforms
and can generate a BERT table, if enabled.
Change-Id: Ia18a79d8de849d556b4b8fd0e6b43090311eb23f
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Define feature check macros for MCE (machine check exception)
and MCA (machine check architecture).
Change-Id: I014c25ced1dbe21f35486f8305b1de7669e932d0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch extends the eSOL implementation on Alder Lake to render text
messages during late CSE sync (from ramstage).
Currently, the eSOL is limited to the early boot phase (until romstage)
and only displays FSP-M memory training warnings or messages during
early CSE sync (at romstage).
Platforms like Nissa/Nirul and Trulo, which use CSE sync from ramstage,
cannot display any eSOL messages, resulting in a brief black screen
during CSE firmware updates.
This patch implements the following logic to scale eSOL for late CSE
sync (at ramstage) without recompiling eSOL code for ramstage:
1. During boot, check if the MRC cache is available. This indicates the
need for memory/DRAM training and triggers an eSOL message.
2. For CSE lite SKUs (applicable to CrOS), leverage the
`is_cse_fw_update_required` API to check if the current CSE RW
firmware version differs from the CBFS metadata file version.
If so, trigger an eSOL message indicating a CSE sync is required.
3. If either condition #1 and/or #2 is true, the AP firmware renders
an eSOL text message using LibGfxInit for the Alder Lake platform.
BUG=b:359814797
TEST=eSOL text messages are displayed during CSE sync and FSP updates.
tirwen-rev3 ~ # elogtool list
0 | ... | Log area cleared | 4088
1 | ... | Early Sign of Life | MRC Early SOL Screen Shown
1 | ... | Early Sign of Life | CSE Sync Early SOL Screen Shown
2 | ... | System boot | 197
3 | ... | Memory Cache Update | Normal | Success
4 | ... | System boot | 198
5 | ... | Firmware Splash Screen | Enabled
Change-Id: I1c7d4475ed5cf6888df1beebab0641ee4203b497
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83975
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This patch prevents the eSOL screen from being wiped out on Alder Lake
platforms that use late CSE sync (from ramstage). This allows the eSOL
text message to remain visible until ramstage.
Currently, the eSOL only functions during the early boot phase (until
romstage), so platforms like Nissa/Nirul and Trulo, which use CSE sync
from ramstage, cannot display any eSOL messages to the user.
A future patch will ensure the eSOL remains relevant for CSE sync in
ramstage, but this patch is necessary to avoid tearing down the IGD text
mode when exiting romstage.
BUG=b:359814797
TEST=eSOL text mode is not torn down when exiting romstage.
Change-Id: I81548b4057ab95ce3da0dbc69703977baf0581f1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
MyST Parser automatically generates label "slugs" for headers which
should be used to reference them from links [1]. These labels are in
"slug-case", i.e. the original header text in lower case separated by
dashes, with punctuation removed. This fixes a few "cross-reference
target not found" warnings.
[1] https://myst-parser.readthedocs.io/en/latest/syntax/optional.html#anchor-slug-structure
Change-Id: Ia6970d03b961bde6d7cd0fa3297f8d84b75d3b34
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This enables SOC_QDF_DYNAMIC_READ_PMC and adds pmc_dump_soc_qdf_info
to report_cpu_info to dump QDF information from bootblock.
Change-Id: Iaf6f46cd9be831dde345c3b3728cd66145746d68
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Saurabh Mishra <mishra.saurabh@intel.com>
|
|
This adds pmc_ipc to bootblock if SOC_INTEL_COMMON_BLOCK_PMC is enabled.
The good place to report SoC QDF can be report_cpu_info in bootblock.
QDF read is done by PMC IPC Command, so this adds pmc_ipc to bootblock
to enable calling pmc_dump_soc_qdf_info.
Change-Id: Id0391eae48fc53cd652acd09e6380ca6802eaf88
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Kinox has two VBT options, selected via fw_config. Add the second
option to CBFS, and update the original file.
Extracted from Google_Kinox.14505.704.0.bin.
TEST=build/boot kinix, verify firmware display init successful and
payload menu visible. Verify correct VBT selected via cbmem log.
Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested to still boot, SeaBIOS -> Void Linux
Change-Id: Idc61e5d17f4c71fc50cf87c60a5063fc893c1d8c
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79544
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`CONFIG_DCACHE_RAM_SIZE' is not necessarily a multiple of way size. As
a result, when the `div' instruction is called to compute the needed
number of ways, there could be a remainder. When there is, one extra
way should be added to cover `CONFIG_DCACHE_RAM_SIZE'.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83982
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 16ab9bdcd578612bb3822373547f939eb90afd82 ("soc/intel/common:
Calculate and configure SF Mask 2") breaks the computation of the
number of ways and as result, all the derived masks. It results in MSR
such as `IA32_L3_MASK_1' to be improperly programmed yielding
unpredictable NEM issues such as hangs.
Indeed, this commit has introduced a backup of 0x1 into %edx before
comparing the requested cache-as-RAM size against the way size. When
the requested cache-as-RAM is larger, it reaches the second part of
the algorithm which computes the necessary number of ways to fit the
requested cache-as-RAM.
This algorithm uses the `div' instruction. Per specification, the div
instruction divides the 64 bits combination of %edx and %eax register.
Since 0x1 got backed up in %edx and assuming a
`CONFIG_DCACHE_RAM_SIZE' of 0x200000, we end up dividing 0x100200000
by the way size instead of 0x200000 which result in a necessary number
of ways of 4098 for a way size of 0x100000.
This commit clears the %edx register before calling the `div'
instruction.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521d
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83948
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel's PMC CrashLog size in legacy mode is expressed in DWORDs and
therefore needs to be explicitly recalculated to bytes.
BUG=None
TEST=Built and checked the size in logs
Change-Id: I2678d537439c24fbd10aa3ceffee63c9a849d28b
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=None
TEST=verify brox DUT is able to power down and stay powered down when
selecting the "Power off" button in the firmware dev screen.
Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=None
TEST=verify rex DUT is able to power down and stay powered down when
selecting the "Power off" button in the firmware dev screen.
Change-Id: I3fdc02a82d197fd2b075e0a66c578149cef3a69f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=firmware-brya-14505.B
TEST=verify brask, nissa, or brya DUT is able to power down and stay
powered down when selecting the "Power off" button in the firmware dev
screen.
Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_PANTHERLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
TEST=Able to build and boot google/fatcat without any functional impact
while debugging.
Change-Id: I36bbe14d02654ed9dbda21df0d9a6a6769b87754
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83962
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_METEORLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/rex0 without any functional impact
while debugging.
Change-Id: I657d20a38e15eee333a4e45c0c600736148173d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83961
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_ALDERLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/redrix without any functional impact
while debugging.
Change-Id: I9a9c81b72d707f5ed2e1a53c139ee22be0e30068
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_TIGERLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/volteer without any functional
impact while debugging.
Change-Id: I3e96b20e7e8b3ce3c2e4884abd315a5cc55fe71d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_JASPERLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/dedede without any functional
impact while debugging.
Change-Id: I3e7abaf5fb3a0d5528041af5ce767a15fc738870
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83960
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot intel/elkhartlake_crb without any
functional impact while debugging.
Change-Id: Idb8db7230c432792e742218d41d891c529b2114f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83959
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_CANNONLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/hatch without any functional impact
while debugging.
Change-Id: Ifad11652b5fa6ff14f713f55a721cdbbfbfde471
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83958
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With commit 26b1a5f62b ("mb/acer/g43t-am3: Rework mainboard for variant
mechanism"), the files related to the G43T-AM3 mainboard were supposed
to be moved into its own variant directory. However, it seems it was
forgotten to delete the old ones and thus remove the duplicates.
Change-Id: I450fab074621d21e80216e4667eaf2510b0e14ad
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83985
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MyST Parser uses {eval-rst} to denote embedded reStructuredText blocks,
instead of eval_rst as used previously by recommonmark.
Change-Id: I1f16d594af41a13762ba299b8d4f9d88e59c68ed
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The USB IDs of the EHCI rate matching hubs found in these chipsets were
missing, preventing the utility from detecting connected USB devices.
Change-Id: I52858e2c75e8a3e1424a13bcddc2f5ec1216164b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This board now uses merlin so it can be removed.
Change-Id: I6036695ccf80b0a7d6e6463d26e5b32aa6cb9d57
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove the ITE mirror functionality; all devices will mirror
automatically when they exit G3, and this is good enough.
Change-Id: I9b82e1b1386b4607dfe7da9b25ba432ec0303cf8
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83629
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This properly supports power_on_after_fail setting on affected
mainboards.
Tested on GA-H61M-S2PV
Change-Id: I3dcc4f032bc5f629fb916c4122beb8dc096bab20
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I15dfd5ed0541352930c3b70252b3e536ad1e6efd
Signed-off-by: Michael Strosche <michael.strosche@gmail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Previously RAM probing was necessary for our QEMU-RISCV target in order
to find the available amount of memory.
Now we get the memory from the devicetree propagated by QEMU, so there
is no reason to keep it anymore.
Tested:
Start QEMU-RISCV and cause an exception to make sure the trap handler
still works.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9b1e0dc78fc2a66d6085fe99a71245ff46f8e63c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83873
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a generic config option, SOC_INTEL_COMMON_DEBUG_CONSENT,
to control the debug interface on Intel SoCs. This eliminates the need
for SoC-specific config options like SOC_INTEL_<SOC_NAME>_DEBUG_CONSENT.
Default values are provided for various debug types:
- 0: Disabled
- 1: Enabled (DCI OOB + [DbC])
- 2: Enabled (DCI OOB)
- 3: Enabled (USB3 DbC)
- 4: Enabled (XDP/MIPI60)
- 5: Enabled (USB2 DbC)
- 6: Enabled (2-wire DCI OOB)
- 7: Manual
Specific SoCs can override the SOC_INTEL_COMMON_DEBUG_CONSENT value
using SoC config override methods.
TEST=Able to build google/rex.
Change-Id: I84ad03f0ffe5da4bc53c665489c430fe9b65ede7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
