summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-11mb/google/dedede/var/metaknight: Update LTE USB port configurationKarthikeyan Ramasubramanian
Update LTE USB port configuration at run-time after probing the firmware config. By default the concerned USB port takes the Type-A port configuration. BUG=b:186380807 BRANCH=dedede TEST=Build and boot to OS in metaknight Change-Id: I5ad5a1670adef54075923cf912fb41a1ce776155 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Raymond Wong <wongraymond@google.com>
2021-05-11mb/google/dedede: Add a variant callback to update devicetree configDavid Wu
This callback is required to update the devicetree config at run-time after probing the firmware config. BUG=b:186380807 BRANCH=dedede TEST=Build and boot to OS in metaknight. Change-Id: I857211bfc4beb36ab225f3786c1707336a34aae9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Raymond Wong <wongraymond@google.com>
2021-05-11mb/intel/dg41wv/devicetree.cb: Fix up whitespaceAngel Pons
Remove a blank line and correct the indentation of another line. Change-Id: Id66f0a847720713c1d3445ac70a9e075228dfe88 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54017 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11device/device.c: Print bus numbers in decimalAngel Pons
For consistency with other log messages, print bus numbers in decimal. Change-Id: Ib08ae40fc67c5f8fafd760e8dbb729d6de34c2bb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-11security/intel/txt: Set up TPM in bootblock if using measured bootArthur Heymans
Change-Id: I1225757dbc4c6fb5a30d1aa12987661a0a6eb538 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-11mb/msi/h81m-p33: Use `ACPI_DSDT_REV_2` macroAngel Pons
Change-Id: I15846bf23e49666e4948f623d6320d5c29e00bd4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54004 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/amd/picasso: Disable CBFS MCACHE againRaul E Rangel
This is still causing boot errors on zork: coreboot-4.13-3659-g269e03d5c42f Fri May 7 22:03:11 UTC 2021 bootblock starting (log level: 8)... Family_Model: 00820f01 PSP boot mode: Development Silicon level: Pre-Production Set power off after power failure. PMxC0 STATUS: 0x800 BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) FMAP: area COREBOOT found @ 875000 (7909376 bytes) ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106 BUG=b:177323348 TEST=Boot ezkinil to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I68b4b73670e750207414f0d85ff96f21481be8ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/53933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11mb/google/kukui: Add discrete EMCP LPDDR4X table for Kakadu/KatsuSunway
Add EMCP LPDDR4X DDR FEPRF6432-58A1930 for ram id 9. BUG=b:186141919 BRANCH=kukui TEST=New Emcp can boot normally on kakadu/katsu Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ieaf05a0a7b0c0671c07b0df29319ebd91fe63e57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54009 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8192: add apusys init flowChien-Chih Tseng
Setup APU mbox's functional configuration registers. BUG=b:186369803 BRANCH=asurada TEST=boot asurada correctly Signed-off-by: Chien-Chih Tseng <chien-chih.tseng@mediatek.com> Change-Id: If05a8af1a2f96598adcf70e15003e4f5dc94e337 Signed-off-by: Flora Fu <flora.fu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48622 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11security/intel/cbnt: Allow to use an externally provided cbnt-prov binArthur Heymans
Building the cbnt-prov tool requires godeps which does not work if offline. Therefore, add an option to provide this binary via Kconfig. It's the responsibility of the user to use a compatible binary then. Change-Id: I06ff4ee01bf58cae45648ddb8a30a30b9a7e027a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-11security/intel/cbnt/Makefile.inc: Use variables for hash algArthur Heymans
Change-Id: I4113b1496e99c10017fc1d85a4acbbc16d32ea41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-11soc/mediatek/mt8195: Enable and initialize eintYidi Lin
eint event mask register is used to mask eint wakeup source. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel eint upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. Change-Id: I703d87e3dc49cf4e0b7ff0c75a6ea80245dd73d3 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54007 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8195: Disable UFS reference clockYidi Lin
UFS reference clock (refclk) is enabled by default, which will cause the UFSHCI to hold the SPM signal and lead to suspend failure. Since UFS kernel driver is not built-in, disable refclk in coreboot stage. Change UFSHCI base register to 0x11270000. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I1386e59f802a9e3c938a7e8dbeea547fbcb02709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10util/cbfstool: Do not set -D_XOPEN_SOURCE on FreeBSDIdwer Vollering
Fixes compilation on FreeBSD CURRENT, and possibly other releases. The compiler, clang, complained about: util/cbfstool/cbfstool.c:181:40: error: implicit declaration of function 'memmem' is invalid in C99 [-Werror,-Wimplicit-function-declaration] util/cbfstool/cbfstool.c:181:31: error: incompatible integer to pointer conversion initializing 'struct metadata_hash_anchor *' with an expression of type 'int' [-Werror,-Wint-conversion] Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: I45c02a21709160df44fc8da329f6c4a9bad24478 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53996 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10Documentation/releases: Fill in coreboot 4.14 release notesPatrick Georgi
Change-Id: I79530c91424112247e485a5a41debc666e0072d4 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cpu/x86/smm: Fix typoPatrick Georgi
Change-Id: I28f262078cf7f5ec4ed707639e845710a8cc56ea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-10*x86: fix x2apic mode boot issueWonkyu Kim
Fix booting issues on google/kahlee introduced by CB:51723. Update use inital apic id in smm_stub.S to support xapic mode error. Check more bits(LAPIC_BASE_MSR BIT10 and BIT11) for x2apic mode. TEST=Boot to OS and check apicid, debug log for CPUIDs cpuid_ebx(1), cpuid_ext(0xb, 0), cpuid_edx(0xb) etc Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ia28f60a077182c3753f6ba9fbdd141f951d39b37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-10doc/relnotes/4.14: add Intel Xeon-SP support status changeJonathan Zhang
Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ibead1c75bb4e41fedc2799366b5b006d76fc8f4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52735 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10doc/releases/coreboot-4.14: Add x86 bootblock and ACPI GNVS changesKyösti Mälkki
Change-Id: Ifa58a9ac7c6dcc391cd9942295319a8677cd4492 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-10AGESA boards: Drop comments about `IDS_DEBUG_PORT`Angel Pons
No board defines this macro. In preparation to drop OptionsIds.h files from mainboards, remove commented-out references to `IDS_DEBUG_PORT`. Change-Id: I67a10d863aeea9e1b91c38aa02d19106b7b97659 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_HOST_SIMNOW` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: Ibc2876a5a8419ec4fa5a793bb996f5c14d989bac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_HOST_HDT` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: I9cd9fa0dc25b1143f8b4c1f20beffba638437398 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_DEBUG_ENABLED` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: Icae0ecae77a20e1568440e3191a29db33b5581d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10device: Drop unused `uma_memory_{base,size}` globalsAngel Pons
These global variables are not used anywhere. Drop them. Change-Id: I3fe60b970153d913ae7b005257e2b53647d6f343 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53977 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10src: Drop "This file is part of the coreboot project" linesAngel Pons
Commit 6b5bc77c9b22c398262ff3f4dae3e14904c57366 (treewide: Remove "this file is part of" lines) removed most of them, but missed some files. Change-Id: Ib8e7ab26a74b52f86d91faeba77df3331531763f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-10soc/intel/cannonlake: Merge soc_memory_init_params() into its callerFelix Singer
soc_memory_init_params() does not only configure memory init parameters. Despite its name, it also configures many other things. Therefore, merge it into its caller function platform_fsp_memory_init_params_cb() to prevent confusions. Built clevo/l140cu with BUILD_TIMELESS=1. coreboot.rom remains the same. Change-Id: Id3b6395ea5d5cb714a412c856d66d4a9bcbd9c12 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52491 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/intel/skylake: Set proper defaults in chipset devicetreeFelix Singer
LPC, P2SB and Power Management controller are always needed. Thus, enable them by default. Change-Id: I20b8cbe536da70fccc3d11e1eedf4a5e14bfc862 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-10inteltool: add initial support for Emmits Burg PCHJonathan Zhang
Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I6a4027bf51b3a189e64211e77621b3dd6c80b00d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-10inteltool: add initial suppot for Sapphire Rapids Scalable ProcessorJonathan Zhang
Intel Sapphire Rapids Scalable Processor is a 4th generation processor of Intel Xeon Scalable Processor family. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Idf492d6e7993b9d55d6cd865e721c81876cee9a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52863 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10mb/gigabyte/ga-d510ud: Fix HDA codec configurationAngel Pons
The values were copied from Foxconn D41S, which uses a different codec. Adjust the codec config as per the settings dumped from vendor firmware. Change-Id: If6a4c41b5d424adb23ebef402d2d2ad21269fe25 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-05-103rdparty/intel-sec-tools: Update submodule pointerArthur Heymans
Some changes: - bg-prov got renamed to cbnt-prov - cbfs support was added which means that providing IBB.Base/Size separatly is not required anymore. Also fspt.bin gets added as an IBB to secure the root of trust. Change-Id: I20379e9723fa18e0ebfb0622c050524d4e6d2717 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52971 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10security/intel/cbnt: Rename bg-prov to cbnt-provArthur Heymans
This prepares for updating the intel-sec-tools submodule pointer. In that submodule bg-prov got renamed to cbnt-prov as Intel Bootguard uses different structures and will require a different tool. Change-Id: I54a9f458e124d355d50b5edd8694dee39657bc0d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-10soc/intel/adl: Allow mainboard to fill CmdMirror and DqDqsRetrainingMaulik V Vaghela
We need to modify update CmdMirror and LpDdrDqDqsRetraining parameters for ADLRVP board. Allowing this parameters to be filled by devicetree will allow flexibility to update values as per board designs. Note that both UPDs are applicable for both DDR and Lpddr memory types. BUG=None BRANCH=None TEST=Build works and UPD values have been filled correctly Change-Id: I55b4b4aee46231c8c38e208c357b4376ecf6e9d9 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-10mb/google/cherry: Configure TPMYidi Lin
Change-Id: I1d6ecdb31eef65d2e96d9251348390aa8598be6c Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10mb/google/cherry: Enable Chrome ECYidi Lin
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Iab3549b5c4e7d845ddd284a0df3fb448e11fbdcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/53899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10soc/amd/picasso: move acpigen_dptc_call_alib to new common alibFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0f7da12429b6278d1e4bc5d6650c7ee0f3b5209 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10Revert "soc/amd/common/espi: Don't set alert pin in espi_set_initial_config"Raul E Rangel
This reverts commit 6eced03b25954e370e20e62f2cbe41f9d5626eae. This prevents zork from booting. We get the following error: eSPI cmd0-cmd2: 00080009 00000000 00000000 data: 00000000. Error: unexpected eSPI status register bits set (Status = 0x10000010) Error: Slave GET_CONFIGURATION failed! This isn't a pure revert. It is more of a fix that keeps the old behavior. BUG=b:187122344 TEST=Boot zork an no longer see eSPI error Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If75a35d3994b0fd23945a450032d3cc81abeb136 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53932 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/amd/cezanne: Force resets to be coldMarshall Dawson
Cezanne must use cold resets. Change the warm reset request to always set TOGGLE_ALL_PWR_GOOD. And, since the bit is sticky across power cycles, set it early for good measure. BUG=b:184281092 TEST=Majolica successfully resets using 0xcf9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I7d4ca5665335b20100a5c802d12d79c0d0597ad9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10mb/google/mancomb: Fix TPM setting in devicetreeIvy Jian
Fix I2C3 setting for TPM in devicetree. BUG=b:187341277 TEST=Build and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I728da76cee0c92c29df4c6ee8bfb4cd07a6366c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-10cezanne/psp_verstage: update SRAM addressKangheui Won
Loading address and size for the user app has been changed with recent PSP release. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: If247cdf3413c6a10f4b3c92fb7e43dd1057865d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-10amd/cezanne: verify transfer buffer in bootblockKangheui Won
Verify if transfer buffer is valid before progressing further to catch invalid transfer buffer early. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I4c470b156944b50e581dcdee47b196f46b0993f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52965 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: differentiate bios entryKangheui Won
AMDFW tool stores bios dir entry to bios1_entry in picasso but bios3_entry in cezanne. Separate getting bios_dir_addr into a function and implement it on each platforms. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie18ed7979a04319c074b9b251130d419dc7f22dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52964 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: move platform-specific code to chipset.cKangheui Won
Move all platform-specific code except direct svc calls to chipset.c. There will be differences between each platforms and we can't put everything into svc.c. TEST=build firmware for zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie7a71d1632800072a17c26591e13e09e0269cf75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52963 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: clean up duplicated targetKangheui Won
psp_verstage.bin target is already defined at common/psp_verstage/Makefile.inc, thus removing it here. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ica4b09282d1c4cfc555c18ba50951458b8580826 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52962 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: populate a/b firmwareKangheui Won
Build amdfw_[ab] and put them into CBFS. We can reuse FW_[AB] position from zork since we have same flash layout and size. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Idb31afa7a513f01593b2af75515a170dfca8d360 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52961 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10mb/google/guybrush: Enable GFX HDA deviceKarthikeyan Ramasubramanian
Enable Display Controller Engine Audio endpoint to enable HDMI audio. BUG=b:186479763 TEST=Build and boot to OS in guybrush. Change-Id: I5e35440e8e70ee125d37c7ac30c9219ec69c7c6e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-10mb/google/guybrush: Enable PP5000_PENEric Peers
Everybody wants a stylish stylus. Enable the power system to it. BUG=b:186267293 TEST=connect multimeter to PP5000_PEN and see it go from 0 to 1. MAGIC! Signed-off-by: Eric Peers <epeers@google.com> Change-Id: I11d05c118ec9451d26136c320f3650c489e02c59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10soc/mediatek/mt8195: Add RTC driverYuchen Huang
Both mt8192 and mt8195 use MT659P RTC. Move mt8192/rtc.c to common folder and rename to rtc_mt6359p.c. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I73ea90512228a659657f2019249e7142c673e68e Reviewed-on: https://review.coreboot.org/c/coreboot/+/53897 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add clk_buf driverYuchen Huang
Both mt8192 and mt8195 use mt6359p clk_buf. But mt8195 clk_buf uses legacy co-clock mode without srclken_rc. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ie9ee91449a7a14e77231493f807b321b2dbaa6a6 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10soc/mediatek/mt8195: Configure eMMC and SDCardWenbin Mei
Change-Id: I0ed82e860612e8a62f361e60d217280f775ab239 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53895 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add i2c driver supportkewei xu
TEST=write/read EEPROM on MT8195 EVB successfully Change-Id: Ia26e55512501e9758d7f5543d176730cf30ce03d Signed-off-by: kewei xu <kewei.xu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53894 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add mt6360 driver for LDO accessAndrew SH Cheng
Signed-off-by: Andrew SH Cheng <andrew-sh.cheng@mediatek.com> Change-Id: I68ca7067f76a67c4e797437593539f8f85909edc Reviewed-on: https://review.coreboot.org/c/coreboot/+/53893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-09soc/amd/cezanne: Generate PCI GPP ACPI namesRaul E Rangel
We can generate the names, so there is no need to hard code a table. This will make the code more generic so it can be reused with picasso in the future. BUG=b:184766519 TEST=Dump guybrush ACPI table and verify it looks correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5134d1dba4fcb9ce8cc4bfad1c619331a95f3b11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52870 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Enable GNB IO-APIC _PRTRaul E Rangel
We can now use the GNB IO-APIC. BUG=b:184766519 TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic` Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4df5a4583f14044d2efcde3a9de9dd85e898a11d Reviewed-on: https://review.coreboot.org/c/coreboot/+/53936 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: add GNB IOAPIC supportFelix Held
To configure and enable the IOAPIC in the graphics and northbridge (GNB) container, FSP needs to write an undocumented register, so pass the GNB IOAPIC MMIO base address to make it show up at that address. BUG=b:187083211 TEST=Boot guybrush and see IO-APIC initialized IOAPIC[0]: apic_id 16, version 33, address 0xfec00000, GSI 0-23 IOAPIC[1]: apic_id 17, version 33, address 0xfec01000, GSI 24-55 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1e127ce500d052783f0a6e13fb2ad16a8e408b0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52905 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09mb/google/guybrush: Populate PIC IRQ dataRaul E Rangel
The PIC IRQs are required so we can correctly set up the PCI_INT registers. This only matters when booting in PIC mode. We don't need to set the IO-APIC registers since the linux kernel will auto-assign those to reduce conflicts. BUG=b:184766519 TEST=Boot guybrush with `pci=nomsi,noacpi amd_iommu=off noapic` and verify xhci and graphics continue to work. $ cat /proc/interrupts 12: 285064 XT-PIC nvme0q0, nvme0q1, rtw88_pci 13: 100000 XT-PIC xhci-hcd:usb1 14: 4032 XT-PIC amdgpu, xhci-hcd:usb3 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1d66ccd08a86a64242dbc909c57ff9685828f61f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52915 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Generate PCI routing tableRaul E Rangel
Use the new acpigen_write_PRT to write the _PRT for each PCI bridge. BUG=b:184766519 TEST=Dump guybrush ACPI table and verify it looks correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idb559335435a95e73640e6d7fb224e16e0592326 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/cezanne: Populate PCI_INTR registersRaul E Rangel
This uses the new FSP PCI methods to pull the routing table and populate the pirq data structure. BUG=b:184766519 TEST=Boot guybrush and verify we get Got IRQ 0x1F (disabled) messages Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie21229cc2fb4fd5b85c0b9e933f7b43af24864b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/common/fsp/pci: Add helper methods for PCI IRQ tableRaul E Rangel
These are helper methods for interacting with the AMD_FSP_PCIE_DEVFUNC_REMAP_HOB_GUID. BUG=b:184766519, b:184766197 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id03d0b74ca12e7bcee11f8d13b0e802861c13923 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/picasso/pci_gpp: Switch to using acpigen_write_pci_GNB_PRTRaul E Rangel
We can now delete the picasso specific version. BUG=b:184766519 TEST=Build zork and verify SSDT has not changed Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic79014e83c9ff63cc7a6757b16764ae23b36984f Reviewed-on: https://review.coreboot.org/c/coreboot/+/53935 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/common/block/pci: Implement acpigen_write_pci_{GNB,FCH}_PRTRaul E Rangel
This is loosely based off of picasso/pcie_gpp.c. This version uses the acpigen_write_PRT_X methods to write the actual records. There are also two functions, 1 for using the GNB, and one for using the FCH. The FCH one is useful when the GNB IO-APIC has not been initialized. BUG=b:184766519 TEST=Dump guybrush ACPI and verify it looks correct Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I926430074acb969ceb11fdb60ab56dcf91ac4c76 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/{picasso,common/blocks/pci}: Move populate_pirq_dataRaul E Rangel
The method now dynamically allocates the pirq structure and uses the get_pci_routing_table method. BUG=b:184766519 TEST=Build guybrush and verify picasso SSDT has not changed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I297fc3ca7227fb4794ac70bd046ce2f93da8b869 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/picasso: Migrate to struct pci_routing_infoRaul E Rangel
This allows us to use the common get_pci_routing_info and pci_calculate_irq. The IRQ field in the struct was also filled in from the PPR. BUG=b:184766519 TEST=Boot ezkinil and verify SSDT table is identical. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I16d90d8c89bfcf48878c0741154290ebc52a4120 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53923 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/common/block/pci: Introduce struct pci_routing_infoRaul E Rangel
This struct is similar to `struct pci_routing` defined in picasso/pcie_gpp.c. It additionally contains the irq used for the bridge and is structured in a way that the FSP can provide via HOB. The next set of CLs will migrate the pci routing functions used by picasso into common and enable pci routing table generation for cezanne. BUG=b:184766519 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1a8d988d125f407f0aa7bc1722d432446aa9aff8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09Documentation/gerrit: Document our Gerrit user roles and proceduresPatrick Georgi
Document the roles we have on review.coreboot.org, the expectations associated with them, and how to become part of any of these groups. Change-Id: Ib31083f5a07bd89efd13ecd6aaf34a69d438d59d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52265 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08doc/releases/coreboot-4.14: add AMD SoC cleanup and Cezanne additionFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I72a9056edfddb4e2cd2e6412cb5ea72cf965f9c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53924 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/cezanne/acpi/soc: call WAL1 for AC/DC state ALIB callFelix Held
BUG=b:187212773, b:185481298 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2cf50257d767525d682602cdcc5547bf001fe2ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/53921 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso/acpi/cpu: move WAL1 method that calls ALIB to commonFelix Held
TEST=Mandolin still boots into Linux and there's no ACPI warning in dmesg. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7e6d38ebeae5e55a4a65930b989838532ab9c446 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53920 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso,common: move ALIB DPTC parameter struct to common codeFelix Held
Also add an alib_ prefix to avoid possible name collisions. TEST=Timeless build for Mandolin results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0f220a4cde6da764bb8bc589b5f44ae16496bd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53918 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso,common: move ALIB DPTC IDs to common codeFelix Held
These parameter IDs are defined in the AGESA Interface specification #55483. This patch also adds a ALIB_DPTC_ prefix to the IDs and makes the names more consistent. TEST=Timeless build for Mandolin results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I75e0504f6274ad50c53faa8fcbde4d6821d85a04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53917 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso/root_complex: move DPTC_TOTAL_UPDATE_PARAMS out of enumFelix Held
The other enum entries are control IDs for the ALIB_FUNCTION_DYNAMIC_POWER_THERMAL_CONFIG ALIB function while DPTC_TOTAL_UPDATE_PARAMS is the total number of configuration settings that will get passed as parameter in the ALIB call, so it shouldn't be part of that enum. TEST=Timeless build for Mandolin results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0cb9e9d2ba579a74d916011b4ead71cc86d69a24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53916 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd: factor out ACPI ALIB function numbers to common codeFelix Held
The ACPI ALIB function numbers are defined in the AMD Generic Encapsulated Software Architecture (AGESA™) Interface Specification (document #55483). TEST=Timeless build stays the same for Mandolin (Picasso) and Gardenia (Stoneyridge). Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I290ef0db32c65ebb2bbbe4f65db4df772b884161 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53915 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08mb/google/volteer: adjust the size for RO/RW mcacheZhuohao Lee
The mcache is overflowed in the latest build. In order to fix the mcache overflow, we increase the mcache size to 0x4000 and adjust the percentage to 50% for the ro/rw mcache. This change is for all of the volteer variants as we see many of the volteer variants which use the latest bios having the mcache overflow issue. BUG=b:187095474, b:187095765, b:187234881, b:162052593 TEST=no mcache overflow in the bios log Change-Id: If9552bc9fa5d36b1ca662c9da030ae7b137b60a8 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-05-08trogdor: Add backlight support for sn65dsi86bridge for HomestarVinod Polimera
Add backlight support in sn65dsi86bridge through the AUX channel using eDP DPCD registers, which is needed on the GOOGLE_HOMESTAR board. Change-Id: Ie700080f1feabe2d3397c38088a64cff27bfbe55 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52663 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08drivers/sn65dsi86: Switch EDID reading to use "indirect mode"Julius Werner
The SN65DSI86 eDP bridge supports two ways to read the EDID: for now we've been using "direct mode", which works by basically making the bridge I2C device listen to another chip address besides its own and proxy all requests received there directly to the eDP AUX channel. The great part about that mode is that it is super easy and hassle-free to use. The not so great part about it is that it doesn't work: for EDID extensions, the last byte (which happens to contain the checksum) is somehow always read as zero. We presume this is a hardware bug in the bridge part. The other, much more annoying way is "indirect mode", where each byte transmitted over the AUX channel has to be manually set up in the I2C registers of the bridge, just like we're already doing with DPCD transactions. Thankfully, we can reuse most of the DPCD code for this so it's not a lot of extra code. It's a bit slower but not as much as you'd expect (26ms instead of 18ms on my board), and the difference is not very relevant compared to common total times for display init. Also, some of the (previously unused) enum definitions for the AUX_CMD mode field of the bridge had just been plain wrong for some reason, and needed to be fixed to make this work. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I65f80193380d3c3841f9f5c26897ed672f45e15a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52959 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07soc/amd/common/acpi/pci_int.asl: Allow IRQ sharingRaul E Rangel
PCI interrupts are level active low, so they can be shared. BUG=b:184766519 TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic` Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I439337dd66fe56790406c6d603e73512c806a19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52957 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07skylake mainboards: Use enum values for SaGvAngel Pons
Replace `3` with `SaGv_Enabled`, which has the same value. Change-Id: I05cfddfefc45ba5bfb0e684445a6d8e02d7865e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-07skylake DT/HALO mainboards: Drop `SaGv` settingAngel Pons
SaGv is only supported on ULT/ULX hardware. Change-Id: I25001e97cce3193629e7fa7573bf9b352362d59b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-07aopen/dxplplusu: Fix IOAPIC in ASLKyösti Mälkki
Change-Id: I8a2abe2cf20952491d181766a3ca492de355fc88 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-07nb/intel/e7505: Fix for RESOURCE_ALLOCATOR_V4Kyösti Mälkki
Memory region 0xa0000 to 0xc0000 was not reserved, the first PCI memory resources might get assigned in this space. FIXES: aopen/dxplplusu PCI EHCI 0:1d.7 memory resource. Change-Id: Ia17025bde83b91d71ad719de6348197cf92e267e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-07soc/amd/common: Add Kconfig/Makefile support for common/fsp/*Raul E Rangel
This will allow us to have subdirectories in common/fsp. BUG=b:184766519 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib3497791e1963867c8fe06a42c111e5d0503ade1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-07mb/google/volteer: Create volet variantSheng-Liang Pan
Create the volet variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:186334008 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOLET Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ic6ca9a78494e3819b0fb39c0bcc70fed95c2c589 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-05-07mb/pcengines/apu1: Disable memory bank interleavingMichał Żygowski
Bank interleaving does not work on this platform, disable it. AmdInitPost returns success thanks to this setting. TEST=boot apu1 and see AGESA_SUCCESS after AmdInitPost Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Id555b458c61df9a27a93f44f600d1718867106ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/52779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-07mb/pcengines/apu2/OemCustomize.c: make AGESA AmdInitPost happyMichał Żygowski
Bank interleaving does not work on this platform, disable it. Additionally enable ECC feature on SKUs supporting it. AmdIntPost returns success thanks to these settings. TEST=boot apu2 4GB ECC and apu3 2GB no ECC and see AGESA_SUCCESS after AmdInitPost Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I010645f53b404341895d0545855905e81c89165e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-07soc/mediatek/mt8195: Turn off L2C SRAM and reconfigure as L2 cacheYidi Lin
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I8777b0c8471fe17ffffdcb6ad5b7c00fb1d35db1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52925 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07mb/google/cherry: configure GPIOsYu-Ping Wu
Configure Chromebook specific GPIOs, including EC_AP_INT, SD_CD, EC_IN_RW, GSC_AP_INT and EN_SPK. Change-Id: Id553f632412af440d21a3b51e017cb74cc27fd22 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52924 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07mb/intel/adlrvp: Program CPU PCIE RP GPIOs in early GPIOMaulik V Vaghela
We need to configure CPU PCIE root port related gpios in early boot block stage for CPU root ports to work. Since we're removing this programming from FSP, coreboot needs to take care of programming this GPIOs. Also we need to enable virtual wire messaging for native gpios for CPU PCIE root ports. Change-Id: Ieda6b6c31ce5bd5e84e4efe544bfc659283ce6f1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52270 Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07mb/google/volteer/var/elemi: Add spd for K4AAG165WB-BCWEWisley Chen
Add SPD support to elemi for K4AAG165WB-BCWE BUG=b:187379245 TEST=FW_NAME=elemi emerge-volteer coreboot chromeos-wqbootimage Change-Id: I839447a9e7c7b6558b2d0877c67dc9cf89ee792a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-05-07sb/intel/common/pmclib: Use pmbase functionsArthur Heymans
Change-Id: Ic0be2c1ffaadcc6212c548332d60d40b405abbda Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-07sb/intel/common: Fix platform_is_resuming()Arthur Heymans
platform_is_resuming() was using the wrong register (PM1_STS) to figure out if the platform was resuming (PM1_CNT). Change-Id: I1f69dca1da158aae15c6da6d4c898c71d9cdb51f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-07sb/intel/common: Implement acpi_is_wakeup_s3()Arthur Heymans
acpi_is_wakeup_s3() requires acpi_get_sleep_type(). Change-Id: Ibe01863e685bcbc9652a72be0632cfbd83e18380 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-07soc/intel/{adl,tgl,jsl}: Enable power button smi after BS_CHIPS_EXITKane Chen
On tgl, we noticed system hang if a shutdown is triggered before fsps. The dut is unable to shutdown properly due to tcss is stuck before tcss_init in fsps. This change enable power button smi on jsl, tgl, adl after fsps. it can also prevent a shutdown failure due to lack of fsps init on certain ip. BUG=b:186194102, b:186815114 TEST=Power on the system and pressing power button repeatedly doesn't cause the system hang during shutdown. Change-Id: I70b871f2676a89bc782116e02beba5c20ec51eef Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-07soc/intel/{adl,tgl,jsl}: Add smihandler_soc_disable_busmasterKane Chen
If a power button SMI is triggered between where it is currently enabled and before FSP-S exits, when the SMI handler disables bus mastering for all devices, it inadvertently also disables the PMC's I/O decoding, so the register write to actually go into S5 does not succeed, and the system hangs. This can be solved by skipping the PMC when disabling bus mastering in the SMI handler, for which a callback, smihandler_soc_disable_busmaster is provided. BUG=b:186194102, b:186815114 TEST=Power on the system and pressing power button repeatedly doesn't cause the system hang during shutdown. Change-Id: I1cf5cf91ebad4a49df6679e01fc88ff60c81526c Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-07mb/google/mancomb: Update AMDFW config fileMartin Roth
Mancomb uses DDR4 SODIMMs, but the default cezanne configuration is for the LPDDR4 version. This changes to use SODIMMS. Further changes may be needed for platform customization, so I put the config file in variants/baseboard instead of the root mancomb directory. BUG=b:187094481 TEST=Build only Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Icc4dc8aec2053cb177765f57e57cac7a099508fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-06mb/google/mancomb: Implement tis_plat_irq_statusMartin Roth
This patch was implemented on Guybrush at CB:52352 BUG=b:185397933 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I141a504a827f37724fab0aaed7498fd543e471d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-06mb/google/mancomb: Update Kconfig with needed optionsMartin Roth
DISABLE_KEYBOARD_RESET_PIN - This pin goes to a test point and is not used for the reset. DRIVERS_UART_ACPI - Add the UART ACPI code FW_CONFIG - Mancomb uses the firmware config interface PSP_DISABLE_POSTCODES - The PSP is not yet initializing eSPI correctly to send post codes to the EC, so disable them for now. BUG=None Test=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I39efcc8d1e0fb1e7ac0b0541a49db0ac0ee56481 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-06mb/google/mancomb: Fix EC SCI configurationMartin Roth
This change fixes two problems: 1) We had the enum values for .direction and .level swapped. The naming is very confusing... 2) ESPI_SYS is not a good event to use for EC SCI. It is a level/low event that is only cleared by reading the eSPI status register 0x9C. Cezanne has added a new event source that directly exposes the SCI bit. This is the correct event source to use for EC SCI. This same patch was added for Guybrush at CB:52673 BUG=b:186045622, b:181139095 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Iac86d2ef5bdd21fbb0a0d4e235efe4fe621023b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52948 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06mb/google/mancomb: Switch eSPI ALERT# to in-bandRaul E Rangel
This matches what we are doing on guybrush. BUG=b:187122344, b:186135022 TEST=build Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id61de28cd0ee762693b287b29bdd7605d4176929 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52956 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06mb/google/guybrush: Switch eSPI ALERT# to in-bandRaul E Rangel
Using the push-pull alert was causing leakages when in S0i3. This is because the EC drives ALERT#, so when the AP enters S0i3, the extra current leaks into the SoC and ends up turning on the power regulators. By using in-band ALERT#, the EC no longer drives this pin high, thus fixing the leak. We could also have used an open drain alert, but the rise time is less than ideal. BUG=b:187122344, b:186135022 TEST=Measure S0i3 power on guybrush and validate it's no longer high. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6de771aeda8feca062652f0ea9eb57d31cb68562 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-06soc/amd/common/espi,mb/: Allow configuring open drain ALERT#Raul E Rangel
Some designs might wish to use an open drain eSPI ALERT#. This change adds an enum that allows setting the eSPI alert mode. BUG=b:187122344, b:186135022 TEST=Boot guybrush using all 3 alert modes Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 12:43:25 +0000