summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-28src: Don't use a #defines like Kconfig symbolsElyes HAOUAS
This is spotted using ./util/lint/kconfig_lint To work around the issue, rename the prefix from `CONFIG_` to `CONF_`. Change-Id: Ia31aed366bf768ab167ed5f8595bee8234aac46b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-28soc/intel/skylake: select FSP_M_XIP if MAINBOARD_USES_FSP2_0Matt DeVillier
Select FSP_M_XIP if MAINBOARD_USES_FSP2_0, since all SkyKabylake boards require FSP-M XIP when FSP 2.0 is used, and since not having it selected results in a non-booting image. Also, put select FSP_T_XIP if FSP_CAR in proper alphabetical order. Change-Id: I6d3986eda18297b12490cefb236f5de5faca6550 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-28vboot: Makefile: Also apply CPPFLAGS include path fixups to ccoptsJulius Werner
In some cases (e.g. Arm architecture variants), include paths are stuck into <stage>-generic-ccopts rather than CPPFLAGS_<stage> (in fact, the whole redundancy between these two is kinda stupid and we should probably eliminate the latter, but I don't want to get into that right now). This patch makes sure those paths are also correctly translated when invoking $(MAKE) for vboot. Change-Id: I37f09b88e555567590664e0e6fac23c34fd887df Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28mb/asus/h61m-cs: Add ASUS H61M-CSdevmaster64
Working: - USB (Partially. Check "Not working") - PCIe - PCIe graphics - All SATA ports - Native memory init - On-board audio (back and front) - S3 (Sleep and wake) Not working: - Fan control - USB (If the keyboard has a USB Hub or if the keyboard is connected through 2 or more hubs then it doesn't initialize in time. A simple reboot allows the keyboard to be used in SeaBIOS and the bootloader) Untested: - PS/2 - On board graphics Change-Id: I4ed2077248a8d7123c728c790d9b81fe37956ed2 Signed-off-by: Abhinav Hardikar <realdevmaster64@gmail.com> Reviewed-on: https://review.coreboot.org/c/30767 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28mb/google/octopus: Fix termination for unused dual voltage pinsShamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIOTermination Configuration. BUG=b:79982669 TEST=Checked that code compiles with changes. Change-Id: If3cadc000ec6fc56019ee3f57e556dc819d5e0a5 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/c/30823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28mainboard/google/octopus/variants/casta: Decrease touchpad I2C CLK frequencySeunghwan Kim
ELAN touchpad supports up to 400KHz, so we need to limit its CLK frequency to 400HKz. BUG=b:123376618 BRANCH=octopus TEST=built and verified touchpad I2C clk frequency gets be lower than 400KHz Change-Id: If7a43fe20c7e5abdf23c8c36e34c072c371563bf Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/31085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28mb/lenovo/thinkcentre_a58: Extend mb nameArthur Heymans
While branded as thinkcentre a58 this board can also be found as "L-IG41M". Change-Id: I06ed424138c46c6b2f29f15c7ea5c3648b26a8d3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-28mb/google/sarien: Using HID over I2C to enable Melf TouchScreenChris Zhou
Current Melfas touchscreen driver cannot unregister ifself when connecting without Melfas touchscreen or connecting with other devices. And Melfas touchscreen FW can use I2C and HID over I2C driver, so switch to using HID over I2C driver. BUG=b:122710830 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Change-Id: If04a2904a0f72a6c8363ab2c9865926c71cb5186 Reviewed-on: https://review.coreboot.org/c/31062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-28amd/stoneyridge: Disable GPIO MASK STATUSRaul E Rangel
MASK_STATUS disables interrupt status generation for the entire GPIO controller when any debounce register is configured. This causes problems when the kernel is loading drivers because we could lose interrupts for previously loaded devices. sb_program_gpios is also not setup to wait when configuring PAD_DEBOUNCE, so there is a potential that we could lose the interrupt status enable bit for other registers. By disabling MASK_STATUS we avoid that problem. BUG=b:113880780 BRANCH=none TEST=Ran a reboot stress test that concluded that we are no longer losing TPM interrupts while booting. Change-Id: Ife1db3b1449f205092509595cbc3eca511bff57a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/31082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-28soc/intel/denverton_ns: Add ACPI T-States and P-StatesJulien Viard de Galbert
Also make soc_get_tss_table public and weak instead of static in intelblock so it can be overridden in denverton. Change-Id: Id9c7da474a81417a5cebd875023f7cd3d5a77796 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-28soc/intel/{apl,skl}: Drop redundant `select RTC`Nico Huber
RTC is now implicitly selected through SOC_INTEL_COMMON_BLOCK_RTC and SOC_INTEL_COMMON_PCH_BASE. Change-Id: I1885c419cfe318b75f3bda6220d4a6f6a8e26575 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-28soc/intel/common/rtc: Enable RTC in common code RTCLijian Zhao
Intel RTC common code driver need to turn on RTC itself.After the change, cannonlake and icelake platform will have RTC enabled. BUG=b:123372643 TEST=build and boot up on sarien platform, check .config to see CONFIG_RTC is set. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I0c8c5cf9e6f7f338b1f2f784c04254649d257536 Reviewed-on: https://review.coreboot.org/c/31112 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28src/soc/intel/cnl/chip.h: Fix preprocessor conditionAngel Pons
Commit dc666f5 (soc/intel/cannonlake: Change in SaGv options) added a conditional preprocessor directive, but its condition was incorrect because SOC_INTEL_CANNONLAKE is selected for CNL, CFL and WHL. Thus, an explicit check for !SOC_INTEL_COFFEELAKE is required. While we are at it, clean up the comment above a bit. BUG=b:123184474 Change-Id: I8a6959bb615fb5668cbfe54339747d135bd5a005 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31095 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-27src/cpu/intel: Set get_ia32_fsb function commonElyes HAOUAS
Add get_ia32_fsb returns FSB values in MHz of intel's CPUs. Also add get_ia32_fsb_x3 function. It returns round up 3 * get_ia32_fsb. Change-Id: I232bf88de7ebba6ac5865db046ce79e9b2f3ed28 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30103 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-27src: Fix the warning "type 'hex' are always defined"Elyes HAOUAS
This is spotted using "./util/lint/kconfig_lint" While at it, do the check in C and not the preprocessor. Change-Id: Icfda267936a23d9d14832116d67571f42f685906 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-27nb/intel/i945: Fix typo on DMIBAR32(0x334)Elyes HAOUAS
Change-Id: Ib894c24bc787c6c211da26dca78bcd330ded6681 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-27nb/intel/i945: Remove initialization already done at bootblockElyes HAOUAS
Upper 128bytes of CMOS and RCBA are already enabled at bootblock. Tested on 945g-MA. Resuming from suspend is working fine Change-Id: I3f34380b0e700cf60688ad58465f9cb0aeda0928 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31107 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-26mb/qemu-riscv: update to match current qemu versionPhilipp Hug
Boots again to payload not found on qemu. Change-Id: Ie107eb882cbaac5a5a06c1ff990e7b9364377640 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/30554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-26Revert "util/bincfg: code cleanup: convert sym_table to a local variable"Angel Pons
This reverts commit 48c24ce5eefe64b1aa82237f0a4be2772c686ef6. Reason for revert: Commit broke bincfg, and sym_table as a global variable is less bad than passing it around in function calls. Change-Id: Ib8d64a1dc201d17a4e278ab0114958b6807a45ac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-26crossgcc: Update CMake to version 3.13.3Elyes HAOUAS
Change-Id: If3bd670e2273715b6996e2ca78a0b9c412bfd220 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-26util/crossgcc: Update to binutils 2.31.1 and gcc 8.2Patrick Georgi
Change-Id: Icf7c6bdd4021bf84cc295c819f93838248e0f4c7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-25superio/common/conf_mode: use pnp_write_config instead of outb callsFelix Held
Change-Id: Ibab8e798bd6bee14ef4141373e48100504d6cb46 Signed-off-by: Felix Held <felix-github@felixheld.de> Reviewed-on: https://review.coreboot.org/c/31061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-25mb/lenovo/x131e: remove PMH7James Ye
This board does not have PMH7. Change-Id: I382958f012e5f4445efc76c7f36bbdf460c29be4 Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/31065 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25util/superiotool: detect Fintek F81866, F8196*Kyle Stevenson
F81866 detection tested with the iBASE SI-613: superiotool r4.9-420-g034e5e6 Found Fintek F81866 (vid=0x3419, id=0x1010) at 0x4e F8196* detection is based on chip IDs provided by iBASE, but untested. Change-Id: I7210e1523a188a8593cd03547bb0c95cd3e7aa39 Signed-off-by: Kyle Stevenson <kstevenson@comqi.com> Reviewed-on: https://review.coreboot.org/c/31052 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/denverton_ns: Enable ACPI using intelblockJulien Viard de Galbert
- Port the existing denverton tables to intelblock - Add C-States table for denverton Note: Removed code is functionally identical to corresponding common code. Tested-on: scaleway/tagada Change-Id: Iee061a258a7b1cbf0a69bcfbf36ec2c623e84399 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-25mb/google/octopus: Override emmc DLL values for AmptonKane Chen
New emmc DLL values for Ampton BUG=b:122307153 TEST=Boot to OS on 5 systems Change-Id: Iadd58d254f4bb384f483c2c3e5615f7569d5211c Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/31048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-01-25mb/google/sarien: Force power on after cr50 updateDuncan Laurie
By default this board is configured to not power up after an EC reset. However in the case of a cr50 firmware update that will reset the EC it will end up powered off. In order to have it stay powered up configure the board to power up. This will get reset to the configured default when it boots again. BUG=b:121380403 TEST=update cr50 firmware and reboot to ensure system boots and does not end up powered off. Change-Id: I85beae24b1bc56bb0813f1fd1305218f04b0c1c8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31058 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25vendorcode/google/chromeos: Add mainboard hook before cr50 updateDuncan Laurie
In order to allow the mainboard to configure the system before a cr50 initiated update reset add a weak function that the mainboard can override if necessary. This will allow a board that would otherwise be configured to stay off after an EC reset to instead power up after the reset and not end up in a shut down state after a cr50 update. BUG=b:121380403 TEST=update cr50 firmware on sarien and reboot Change-Id: I11f9e8c9bfe810f69b4eaa2c633252c25004cbd0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31057 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/cannonlake: Export function to set After G3 stateDuncan Laurie
Export the SOC level function to set the After G3 state so it can be changed by the mainboard. The setting will be restored by a normal boot but in some circumstances coreboot wants to ensure that it will be powered up again after a reset. BUG=b:121380403 TEST=update cr50 firmware on sarien and reboot and ensure the host does not power off after the cr50 initiated reset. Change-Id: I6cd572ac91229584b9907f87bb4b340963203c32 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31056 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/cannonlake: Disable CpuRatio and SaGv in recoveryDuncan Laurie
Disabling CpuRatio UPD for FSP will ensure it does not force a hard reset to set the CPU Flex Ratio at boot. This is important in a recovery mode boot where the SOC will lose power and need to set the flex ratio again. Disabling SaGv makes recovery mode training faster and mirrors the setting that was done on Skylake. BUG=b:123305400 TEST=reliably enter recovery mode on sarien Change-Id: Ie9664493a980af9acce82faff81f4c4b1355be73 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-25mb/google/sarien: Increse BIOS region size to 28MBLijian Zhao
Increase BIOS region(SI_BIOS) from 16MB to 28MB to make more spaces for upcoming payloads. BUG=b:121169122 TEST=Build and boot up fine into OS on sarien and arcada platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I4b03e20a485cb819b468c00e68f1539e92731237 Reviewed-on: https://review.coreboot.org/c/31054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-25soc/intel/apollolake: Override GLK usb clock gating registerJohn Zhao
It was observed system suspend/resume failure while running RunInDozingStress. Apply correct GLK usb clock gating register value to mitigate the failure. BRANCH=octopus BUG=b:120526309 TEST=Verified GLK clock gating register value after booting to kernel. Change-Id: I50fb16f5ab0e28e79f71c7f0f8e75ac8791c0747 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-25mb/google/kahlee/variants/aleena: Add support Synaptics touch padLucas Chen
Add support Synaptics touch pad for Aleena/Kasumi. BUG=b:122549449 BRANCH=master TEST= Check if synaptics touch pad working in ChromeOS. Change-Id: Icab1b312f1943b27037ef458044ce9e7172919ee Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31064 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ↵Jan Tatje
need it Hide "Add gigabit ethernet firmware" option for boards that do not use GbE firmware in GbE section. The option is now hidden by default and can be reenabled on a per-board basis by selecting MAINBOARD_USES_IFD_GBE_REGION in the mainboards Kconfig. The following boards seem to use this: mb/roda/rv11 mb/ocp/wedge100s mb/ocp/monolake mb/lenovo/x230 mb/lenovo/x220 mb/lenovo/x201 mb/lenovo/x200 mb/lenovo/t530 mb/lenovo/t520 mb/lenovo/t430s mb/lenovo/t430 mb/lenovo/t420s mb/lenovo/t420 mb/lenovo/t400 mb/kontron/ktqm77 mb/intel/saddlebrook mb/intel/kblrvp mb/intel/dg43gt mb/intel/dcp847ske mb/intel/coffeelake_rvp mb/intel/camelbackmountain_fsp mb/hp/revolve_810_g1 mb/hp/folio_9470m mb/hp/compaq_8200_elite_sff mb/hp/8770w mb/hp/8470p mb/hp/8460p mb/hp/2760p mb/hp/2570p mb/google/sarien mb/facebook/watson mb/compulab/intense_pc mb/asus/maximus_iv_gene-z The boards were identified by looking at devicetree.cb, but this list is possibly still incomplete. Change-Id: Ibfb07902ad93fe5ff2bd4f869abcf6579f7b5a79 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-25mb/{kontron,supermicro}: Use pcidev_on_root()Elyes HAOUAS
Change-Id: I61b3e5c92830f02d61a108dadde25ff261099e57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-25nb/intel/sandybridge/acpi: Add RMRR entry for iGPUNico Huber
The iGPU always needs access to its stolen memory. For proper IOMMU support, we have to make the OS aware of that. Directly below TOLUD lies the data stolen memory (BDSM) followed by the GTT stolen memory (BGSM), the iGPU needs access to both. Change-Id: I391d0a5f1ea14bc90fbacabce41dddfa12b5bb0d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-24src/mb/asrock/../g41m-s3: Remove spurious devicesAngel Pons
This fixes errors regarding "PCI: Leftover static devices" Change-Id: Ie45fe6934df4a9dad4c8f6b1af665034853c4c5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24ec/google/wilco: Turn on wake up from lidLijian Zhao
Send required EC command to enable ACPI S3 wake up from lid switch. BUG=b:120748824 TEST=Put Sarien system into S3 and then wake up from lid switch successful. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I13f3469847b0886147b8b624311a1ece796f847b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-24mb/*/*/devicetree.cb: Move the ioapic device under the LPC bridgeArthur Heymans
This fixes spurious lines "child IOAPIC: 02 not a PCI device" and IOAPIC as leftover device. Change-Id: Id8010c84c45f0859508e7564c0eaa501904b7043 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24Revert "soc/intel/denverton_ns: Rewrite pmutil using pmclib"Patrick Georgi
This reverts commit ab1227226ebd78b40783cb200e60711b900352f0. There were significant changes around soc_reset_tco_status() that this code needs to be adapted to. Change-Id: I563c9ddb3c7931c2b02f5c97a3be5e44fa873889 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24mb/google/sarien/variants: Set tcc offset valueSumeet Pawnikar
Set tcc offset value to 5 degree celsius for Sarien system. BRANCH=None BUG=b:122636962 TEST=Built and tested on Sarien system Change-Id: I06fbf6a0810028458bdd28d0d8a4e3b645f279ca Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2019-01-24riscv: ARCH_RISCV_RV{32,64} selects ARCH_RISCVRonald G. Minnich
ARCH_RISCV_RV{32,64} will now select ARCH_RISCV. Change-Id: Ia7a1a8f0bfab20e91b8429dd6dd3e9a4180a0a5b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/31042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-01-24soc/intel/denverton_ns: Configure MCAJulien Viard de Galbert
Change-Id: I101eb4f008a13af92bac5ed738a8d1f1f8c65eba Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25433 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/denverton_ns: Use cpulib in cpu.cJulien Viard de Galbert
Also remove duplicate code Change-Id: I45da6363a35cf6f5855906bb97ed023681d36df7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25432 Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/denverton_ns: Enable Fast StringsJulien Viard de Galbert
Change-Id: I7cee3c40299abf14a24128b1ac14f1823f87a0e1 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25431 Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/denverton_ns: Rewrite pmutil using pmclibJulien Viard de Galbert
Change-Id: If31e7102bf1b47c7ae94b86d981b762eda0a19e5 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25427 Reviewed-by: David Guckian Reviewed-by: King Sumo <kingsumos@gmail.com> Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/common/block/acpi: fix P-States extra entryJulien Viard de Galbert
The ratio_max step is appearing twice when (ratio_max - ratio_min) is evenly divisible by the ratio step. This is because in this case there are no rounding down of ratio_max in the for loop. Thanks Jay Talbott for the step calculation algorithm. Change-Id: I91090b4d87eb82b57055c24271d679d1cbb3b7a7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-24ec/kontron: Add support for Kontron kempldNico Huber
A programmable logic device used by Kontron as EC on their COM express modules. The name `kempld` is taken from Linux kernel sources, as is the I2C driver. The meaning of the acronym is unclear, probably: Kontron Embedded Module PLD. Change-Id: If9a0826c4a8f5c8cd573610c2d10561334258b36 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24mb/google/sarien: Fix recovery mode detectionDuncan Laurie
In order to support the physical recovery GPIO on sarien it needs to enable the option VBOOT_PHYSICAL_REC_SWITCH and set the GPIO number in the coreboot table appropriately so that depthcharge can correctly determine the GPIO number. The same is done for the write protect GPIO in this table. Additionally since we are reading a recovery request from H1 it needs to cache the result since H1 will only return true on the first request. All subsequent queries to H1 will not indicate recovery. Add a CAR global here to keep track of the state and only read it from H1 the first time. BUG=b:121380403 TEST=test_that DUT firmware_DevMode Change-Id: Ia816a2e285d3c2c3769b25fc5d20147abbc71421 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31043 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mb/google/octopus/bobba: Add support to handle PEN_EJECT eventKarthikeyan Ramasubramanian
Enable gpio_keys driver for bobba and add required configuration in the device tree to handle the pen eject event. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system wakes on Pen Eject. Ensure that the system enters S0ix and S3 states after the pen is ejected. Ensure that the system enters S0ix and S3 states when the pen remains inserted in its holder. Ensured that the system does not wake when the pen is inserted. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder. Change-Id: I768b89d2b45f4dcab6d235b11ce00544a827f22d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24drivers/generic/gpio_keys: Add trigger for wakeup event actionKarthikeyan Ramasubramanian
Currently without any trigger the wakeup event is generated on both the rising and falling edges of the GPIO input. Add support to specify the trigger explicitly so that the configuration can be passed to the kernel. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system wakes on Pen Eject. Ensure that the system enters S0ix and S3 states after the pen is ejected. Ensure that the system enters S0ix and S3 states when the pen remains inserted in its holder. Ensured that the system does not wake when the pen is inserted. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder and ejected from its holder. Change-Id: Ifb08ba01106031aa2655c1ae2faab284926f1ceb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24soc/intel/gpio: Enable configuring GPIO debounce durationKarthikeyan Ramasubramanian
Add new helper macros to enable configuring debounce duration for a GPIO input. Also ensure that the debounce configuration is not masked out. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the debounce duration is configured as expected. Change-Id: I4e3cd7744867bcfbaed7d3d96fed4e561afb2cec Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24soc/intel/common/gpio_defs: Enable configuring GPIO_DW2 pad registerKarthikeyan Ramasubramanian
Currently all the helpers support configuring GPIO_DW0/1 registers. In some architectures there is an additional configuration GPIO_DW2 register that can be used to configure debounce duration etc. Add a helper macro to enable configuring GPIO_DW2 pad register. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the current configuration is not disturbed by turning on the GPIO_DEBUG option and verifying the debug output before and after the change. Change-Id: I3e5d259d007fdc83940a43cc4cd4a2b8a547d334 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24cbmem_top: Fix comment and remove upper limitPatrick Rudolph
There's no such limit on 64 Bit coreboot builds. * Fix comment in cbmem.h * Remove 4 GiB limit on Cavium SoCs Tested on opencellular/elgon. Still boots Linux as payload. Change-Id: I8c9c6a5ff81bee48311e8bf8e383d1a032ea3a6d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24soc/cavium/cn81xx: Replace uses of dev_find_slot()Kyösti Mälkki
Change-Id: I9f176caff3b6423121676eb895f5f68a5b926de4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL adds a new function mt8183_early_init, which includes all initializations that should be done in early stages. All mainboards using MT8183 should manually call it in either bootblock or verstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-24cr50: Add probe command to poll Cr50 until DID VID is validKeith Short
Added new routine cr50_i2c_probe() which ensures that communication with the Cr50 over I2C is good prior to attempting other initialization of the Cr50 and TPM state. This avoids a race condition when the Cr50 is first booting that it may reset it's I2C slave interface during the first few I2C transactions initiated from coreboot. BUG=b:120009037 BRANCH=none TEST=Run the Cr50 factory update against Careena board. Confirm that I2C reads are retried until the DID VID is valid. Tested against debug Cr50 firmware that forced failure of cr50_i2c_probe() and verfied that coreboot shows recovery screen. Change-Id: I47c59a32378ad00336277e111e81ba8d2d63e69a Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/30295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
This patch enables relevant GPIOs to enable WWAN. WWAN also requires to enable USB 2 port 6 and USB3 port 5 which is already enabled in device tree related changes. BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I1559bbc6168aec1a369bf3291d2c1e2f9a2fbe07 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
Enable PCIe WLAN for hatch 1. Enable PCI port 14 for PCIe WLAN 2. Enable CLKREQ, CLK SRC 3 for PCI port 14 3. GPIO pad config for WLAN and BT USB port for BT has already been enabled so not included in this patch BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I4f2a6eb37a467ad8b8cdde8fe6b657fabb383b04 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-24util/lint: update non-ascii linter checking rulesMartin Roth
- Check non-external payloads - Remove directories that aren't in the coreboot git repo. - Remove non-phrase rule from list of excluded phrases Change-Id: I9e056e8b43af567f102dfc0db76f60328aa1ed04 Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/c/28449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24util/kconfig: Add `toada` Ada spec generation toolNico Huber
Converts `auto.conf` to an Ada spec file. Write to $(obj)/cb-config.ads and set the package name to `CB.Config`. Change-Id: I97c060d8a613c74a82a18aff9524ad4b01f9df56 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-24nb/intel/x4x: Put stage cache in TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. Tested on Intel DG41WV, the stage cache gets properly created and used on S3 resume. Change-Id: Ie46c1416f8042d5571339b36e1253c0cae0684b8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25606 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24nb/intel/pineview: Put stage cache in TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. Tested on Foxconn D41S. Change-Id: I3d163e8ff328ba01425b524a673f34a96fb93ea7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25605 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24nb/intel/gm45: Put stage cache in TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. Tested on Lenovo thinkpad X200: on cold boot the external stage cache gets created and the cached ramstage gets successfully used on the S3 resume path. Change-Id: I642f7d6ae5523a35904c8e1f029027565a364d26 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25604 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24nb/intel/i945: Put stage cache in TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. Tested on Intel D945GCLF and Lenovo Thinkpad X60, on cold boot the external stage cache gets created and the stage cache gets properly used on S3 resume. Change-Id: I447815bb0acf5f8e53834b74785d496f9d4df1da Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25603 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24cpu/intel: Configure IA32_FEATURE_CONTROL for alternative SMRRArthur Heymans
Some CPUs, (Intel core2 and pineview) have slightly different SMRR MTRR mechanism. The MSR_SMRR_PHYSBASE/MASK MSRs are at a different location, have slightly different semantics and need SMRR enable in a locked down IA32_FEATURE_CONTROL MSR. This change takes away the possibility to (not) lock IA32_FEATURE_CONTROL on these CPUs, as this is needed for SMRR MSR to work. Since sockets cover multiple CPUs of which only some support SMRR, the Kconfig option CONFIG_SET_IA32_FC_LOCK_BIT is kept in place, even though it gets meaningless on those CPUs. Locking that bit was the default anyway. With this patch Intel Netburst CPUs also configure IA32_FEATURE_CONTROL. According to Intel 64 and IA-32 Architectures Software Developer's Manual those CPUs support that MSR so issues are not to be expected. Change-Id: Ia85602e75385e24ebded75e6e6dd38ccc969a76b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27586 Tested-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-24Kconfig: Remove symbol names for choicesNico Huber
These are completely throwing Kconfig off, resulting in duplicate entries. Change-Id: I401467da686d5011a456b661a10170492a919c81 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24cpu/intel/model_406dx: Remove the notion of CPU socketsArthur Heymans
Change-Id: I5e8fb2e7331d02224a4199c4d05f92c603c57f78 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31032 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24cpu/intel/model_206ax: Remove the notion of socketsArthur Heymans
With the memory controller the separate sockets becomes a useless distinction. They all used the same code anyway. UNTESTED: This also updates autoport. Change-Id: I044d434a5b8fca75db9eb193c7ffc60f3c78212b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31031 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24sb/intel/common: More SMBus block_cmd_loop()Kyösti Mälkki
Setup to different block transactions are similar enough to have common place to call execute_command() in. Change-Id: I671fed280f47e6bc673eb7506f09ed6ed36d2804 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26763 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24sb/intel/common: SMBus block_cmd_loop()Kyösti Mälkki
For debugging prints, report the number of loop spent polling instead. Change-Id: I61865aaafc9f41acd85c5dc98817d12642965ba4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21121 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24sb/intel/common: SMBus complete_command()Kyösti Mälkki
Adds helper to test for SMBHSTSTAT flags for hardware having finished or failed a transaction. Change-Id: Idea15e03edde7aeedf198c1529f09c24a5bc0b06 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24sb/intel/common: SMBus execute_command()Kyösti Mälkki
Implement the common start of transaction. Fixes a problem where smbus_wait_until_active() can miss SMBHSTSTS_HOST_BUSY being set, if transaction completes very fast. Or if we are single-stepping or executing under SerialIce emulation. Change-Id: Icb27d7d6a1c54968950ca292dbae05415f97e461 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24sb/intel/common: SMBus setup_command()Kyösti Mälkki
Implements the common parts of any SMBus transaction with a stub to log and recover (TBD) from timeout errors. Bits in SMBHSTCTL register are no longer preserved between transactions. Change-Id: I7ce14d3e895c30d595a94ce29ce0dc8cf51eb453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24mb/ocp/wedge100s: Add SuperIO supportPatrick Rudolph
* Enable COM1, COM2, PMC1 and PMC2 TODO: Look at additional configuration and EC space. Tested on wedge100s. The serial works without CONFIG_CONSOLE_SERIAL. Change-Id: Id139bf243c7e7ac3e51a0ddb19d2396452341e29 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-24superio/ite: Add it8528ePatrick Rudolph
* Add support for the SuperIO part of IT8528E * Based on the IT8528E datasheet and tests on vendor firmware TODO: Add support for accessing EC space, which should be implemented in src/ec/ instead, as it's a separate logical unit. No datasheet is publicy available. Tested on wedge100s. The serial works under the OS without CONFIG_CONSOLE_SERIAL. Change-Id: I72aa756e123d6f99d9ef4fe955c4b7f1be25d547 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-24AGESA fam12/fam14: Drop amdfamX.c file includeKyösti Mälkki
Quick and ugly approach, just paste the file in place, dropping any __PRE_RAM__ parts. That's the way it was previously done for fam15tn already, refactoring common parts will happen on a later date. Change-Id: I29fd421fb4aef984d117912ac836dee71d3d73ea Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24superio/it8716f: fix pnp_dev_infoFelix Held
Change-Id: If6a4b6f52425a795af34264ab839968b36a117eb Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/30960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24superio/wpcm450: fix keyboard IO masksFelix Held
The two IO regions of the keyboard controller are 1 byte long, not 8. Change-Id: I7319ce9f84181759f4dc7b59c0020f3a5dd5dc03 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/30958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-23mb/google/sarien: Replace B0D4 with TCPUSumeet Pawnikar
Replace B0D4 with TCPU for DPTF thermal sensor. This helps to maintain consistency between coreboot and UEFI BIOS. Change-Id: I024068c19160e1c08badef3d304ada14455c045f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31028 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23soc/intel/cannonlake: Replace device name B0D4 with TCPUSumeet Pawnikar
Replace device name from B0D4 with TCPU for DPTF sensor. This helps to maintain consistency between coreboot and UEFI BIOS. Change-Id: I962d74fc1baa07581d065734aaabb4dcd5e3d247 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-23mb/*/*/devicetree.cb: Make sandybridge devicetree uniformArthur Heymans
This is a merely cosmetic change. Change-Id: If36419fbee9628b591116604bf32fe00a4f08c17 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-23i945,ICH7: Write on RPFN only onceElyes HAOUAS
RPFN is a R/WO register we write on it in i945/early_init.c and i82801gx/pcie.c Drop the romstage write. Change-Id: If9a131ad12530876a650b7a38daa9c9fc52aefb7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-23soc/amd/stoneyridge/gpio: Allow specifying 0 value for debounce timeoutDaniel Kurtz
It is possible to configure debounce, but leave it disabled by specifying a 0 value for the timeout. Add a define for allowing to do so via the PAD_DEBOUNCE() macro. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:113880780 BRANCH=none TEST=compile Change-Id: I9de61297b0677cc904535a51c16970eecb52021d Reviewed-on: https://review.coreboot.org/c/30998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-01-23mb/intel/icelake_rvp: Enable dptf functionalitySumeet Pawnikar
Enable dptf functionality for IceLake based U and Y systems. Change-Id: I8ef396f9df8e39300d5870fd9a147ecdd6f0ba90 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/29686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-23mb/intel/glkrvp: Fix termination for dual voltage pinsShamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIO Termination Configuration. BUG=b:79982669 TEST=Checked that code compiles with changes. Change-Id: I8156c67df152555ecf9e7be9e4851468538bcff1 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/c/30867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-23util/lint: Update non-ascii linter for FreeBSDMartin Roth
On FreeBSD, this test was failing with the error: "grep: Argument list too long" - Remove support for testing coreboot not in a git repo. Many of the other linters already don't support this. - Use git grep to find offending files, then xargs to print out the lines. Change-Id: Ic017dc3465fd9a46ff4e6ec5ef16396e963483cd Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/c/28448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
Kukui with vboot enabled will build with `detachable_ui`, which needs larger space in CBFS for more complicated assets. So we need to revise FMAP sections: - BOOTBLOCK (not really used) only needs <= 32K. - GBB can be much smaller since assets moved from GBB to CBFS. - FMAP is re-ordered (with the cost of less efficient in bsearch) so CBFS can get larger continuous space. - COREBOOT(CBFS) should take all space left. Since FMAP and COREBOOT have changed location, the system will need to reflash EC (which contains the new bootblock) as well. BUG=b:123202015 TEST=Builds and boots on Kukui P1 Change-Id: I22cff99dca8c396c5897c3f6631721af40f3ffbd Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23mb/google/poppy/variant/nami: disable unused usb2 portsRen Kuo
disable unused usb2 ports of bard and ekko skus BUG=120874946 TEST=build a test firmware and run lsusb to check usb ports Change-Id: I2ef3cd17ada8b65c96bc80675650905949f235e1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30986 Reviewed-by: Vincent Wang <vwang@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/google/arcada: Add settings for noise mitgationCasper Chang
Enable acoustic noise mitgation for arcada platform, the slow slew rates are fast time dived by 2. BUG=none BRANCH=none TEST=none Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Ia838818a76a7f638b24146f3eb48493a4091c9cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/31034 Reviewed-on: https://review.coreboot.org/c/31034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-23mb/lenovo/x131e: add VBTJames Ye
VBT was extracted from VBIOS ROM. Tested with libgfxinit, booting SeaBIOS into Linux. Change-Id: Ibedb43852dc9b846850e1070b84f708c847b7dbf Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/31003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/pineview: Use parallel MP initArthur Heymans
Remove guards around CPU code on which all platforms use parallel MP init code. This removes the option to disable HT siblings. Tested on Foxconn D41S. Change-Id: I89f7d514d75fe933c3a8858da37004419189674b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25602 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/x4x: Use parallel MP initArthur Heymans
Use parallel MP init code to initialize all AP's. Also remove guards around CPU code where all platforms now use parallel MP init. This also removes the code required on lapic init path for model_6fx, model_1017x and model_f4x as all platforms now use the parallel MP code. Tested on Intel DG41WV, shaves off about 90ms on a quad core. Change-Id: Id5a2729f5bf6b525abad577e63d7953ae6640921 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25601 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/i945: Use parallel MP initArthur Heymans
Use the parallel mp init path to initialize AP's. This should result in a moderate speedup. Tested on Intel D945GCLF (1 core 2 threads), still boots fine and is 26ms faster compared to lapic_cpu_init. This removes the option to disable HT siblings. Change-Id: I955551b99e9cbc397f99c2a6bd355c6070390bcb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-23nb/intel/gm45: Use parallel MP initArthur Heymans
This places the parallel mp ops up in the model_1067x dir and is included from other Intel core2 CPU dirs that can use the same code. Tested on Thinkpad X200 on which boot time is reduced by ~35ms. Change-Id: Iac416f671407246ee223075eee1aff511e612889 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/23434 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I985c5061ce4ed4d88a17619aa5cde7d0121dd3a3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-23soc/intel/baytrail/romstage: Remove unneeded white spaceElyes HAOUAS
Change-Id: I6725d1130a40d3c458a3cd5a116d6e91354ec41b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23src/drivers: Remove needless '&' on function pointersElyes HAOUAS
Change-Id: I7a99d0dcbc8ea1362a12a68fa519c49058d30a05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-23soc/{amd,intel}: Remove needless '&' on function pointersElyes HAOUAS
Change-Id: I7a59fd2f370d2b0d830ca83be9a9bc1abe2750f5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-01-23mb/purism/librem_skl: add 13v3 variantMatt DeVillier
The 13v3 is just a 13v2 with TPM added, so duplicate 13v2 config and change strings where needed. Leave MAINBOARD_PART_NUMBER unchanged since boards were initially shipped with 13v2 firmware, and changing it now would cause flashrom to throw a board mismatch error. Change-Id: I1a5e4c84cc9444bb9731b6dcc4de2ce7427dbbb1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:34:26 +0000