summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-22drivers/usb/acpi: add reset gpio to usb acpi driverNick Vaccaro
Add ability to define a reset gpio in acpi for a USB device. BUG=b:119275094 Change-Id: Ife3ea43a1eadf2548aa52b8fbd792e691d7cc7f2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajat Jain <rajatja@google.com>
2018-11-22sb/intel/common: Reset Pre-OP after atomic SPI cycle is finishedWerner Zeh
Make sure that the Pre-Op register is cleared when an atomic cycle has been finished without errors. Change-Id: Ied88337125b125474b411e2f39f668171d15bfac Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-11-22soc/intel/icelake: Create macros for FSP consumptionSubrata Banik
1. Modify PCIEXBAR to accomodate Type-C Root Port 2. LPSS device mode selection Change-Id: Ib7e4bc304f93e4b63ac2d7f194ca441dd96dd943 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29697 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22mb/google/poppy/variants/nami: Split FP MCU Wake and IRQ GPIOSShelley Chen
We are seeing problems (interrupt storm) with using the same gpio for FP MCU wake and irq signals. Reverting back to using separate gpios for wake and irq until we resolve the issue. BUG=b:119447525, b:115706071 BRANCH=Nami TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop into S0ix in the EC console. Also, unlock from lock screen with fingerprint. Change-Id: Id7987f28526256808b8ed49e66f66298f7cdbcee Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Vincent Wang <vwang@google.com>
2018-11-21(console,drivers/uart)/Kconfig: Fix dependenciesNico Huber
The dependencies of CONSOLE_SERIAL and DRIVERS_UART were somehow backwards. Fix that. Now, CONSOLE_SERIAL depends on DRIVERS_UART, because it's using its interface. The individual UART drivers select DRIVERS_UART, because they implement the interface and depend on the common UART code. Some guards had to be fixed (using CONSOLE_SERIAL now instead of DRIVERS_UART). Some other guards that were only about compilation of units were removed. We want to build test as much as possible, right? Change-Id: I0ea73a8909f07202b23c88db93df74cf9dc8abf9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-21mainboard/ocp/wedge100s: Add vboot supportPhilipp Deppenwiese
* Add RO only FMAP. * Add kconfig options. Tested=OCP Wedge100s Change-Id: I1979e0263e41f21c01c407ac81ad1198a53741e8 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21soc/intel/fsp_broadwell_de: Add vboot supportPhilipp Deppenwiese
Enable vboot2 in romstage. Change-Id: I7f1a1e8538999c5e4e54f3a4aa0cdf6d8a309c4f Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21payloads/tianocore: rebase patches to UDK2018 releasePiotr Król
Patches should be applied against edk2 release instead of arbitrary commit. This aims to simplify Tianocore payload support by other platforms. Change-Id: Ib409f6f93eb64d7a9a2f09a75f8e637ab8689410 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/27615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21soc/intel/.../Kconfig: Drop SOC_INTEL_COMMON_BLOCK_I2C_DEBUGNico Huber
It's dead. Change-Id: I1fc051937a36878eab23f6022bc42028d5606c83 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-21util/ifdtool: Add IceLake platform support under IFDv2Aamir Bohra
Change-Id: Ib69a2cbc3d8ab9f35c940e95b0edb4b04b50b716 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://chromium-review.googlesource.com/1162995 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Tested-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/c/29696 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21mb/google/octopus: Update TSR1 threshold settingsSumeet Pawnikar
Update passive temperature threshold value from 50C to 52C and critical temperature threshold from 90C to 80C for TSR1 sensor. BUG=b:79779737 TEST=Build and verified on Bobba/Bobba360/Sparky/Sparky360 boards Change-Id: Iffef8afe0f1c6c80a6ae8ecb831aaf749443980e Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/29264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21src/cpu/intel/Kconfig: Remove dead sourceElyes HAOUAS
fsp_model_206ax was removed in Change-Id: I7b6bc4bfd Change-Id: If77426fcb9f30f3e8b79d7c134053276701a5ecc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-11-21soc/intel/braswell: Disable OS use of HPETFrans Hendriks
The timer interrupts don't appear when HPET is enabled. This result in Linux reporting 'MP-BIOS bug: 8254 timer not connected to IO-APIC' Enabling CONFIG_DISABLE_HPET disables OS use of HPET. Intel issue 4800413 (doc #5965535) reports Windows7/Ubuntu Installation Hang or Slow Boot Issue. BUG=Intel #4800413 TEST=Portwell PQ7-M107 Change-Id: Ie9a78dcc736eb057c040a0a303c812adb1f76f3c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2018-11-21nb/intel/haswell: Move MMCONF_BASE_ADDRESS to northbridge KconfigElyes HAOUAS
Change-Id: I44f27405fc8ccbe54c7d19b70327da866390a156 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/28603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-11-21soc/intel/cannonlake: Fix IO decode setupDuncan Laurie
This change makes the early IO decode setup mirror that of other Intel SOCs and fixes issues with COM1 not being enabled properly. Tested by successfully successfully receiving serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I9bd894fea62b78b81e5c80b5e88a539ebddac2df Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-11-20drivers/uart/Kconfig: Be smarter about DRIVERS_UART_8250IONico Huber
It defaults to y to avoid having to select it per mainboard. But that makes a mess because it results in linker conflicts unless other UART drivers disable it explicitly. We try to be smarter about the default value for now. The real solu- tion would be to hardcode it per mainboard. But who knows which boards actually have it? Change-Id: I7e755fe0e4f6d1c31ef2854603a5510c3cdc4967 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29571 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19soc/intel/{common, skylake}: Make ASPM enabling as common PCH featureSubrata Banik
This patch moves required Kconfig selection for enabling ASPM feature (like clk_pm, L1 state etc) from soc code to intel common pch base code. TEST=Run lspci -vvv | grep ASPM The output shows the ASPM L1 is enable for pci devices Change-Id: Ic77602a75f0c9ccf28ebfd57e53433dc90985a16 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-19mb/pcengines/apu2: Use IS_ENABLED(CONFIG_APU2_PINMUX_{GPIO*,UART_*})Elyes HAOUAS
Change-Id: Ie5f73453a8cc12be5f18d8e7f0462ce3f38bb9d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29585 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19mb/google/kahlee/variants/delan: Enable Weida touchscreen deviceIvy Jian
This change adds ACPI properties for WDT8752A device. BUG=b:117174180 BRANCH=master TEST=Verify touchscreen on delan works with this change Change-Id: Id1484a482de6282c97f3aac329f217bbcb7dbd18 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-11-19northbridge/intel/fsp_*: Remove legacy SoCszaolin
* Remove FSP Sandy/Ivybrige which are unused. * Open Source implementation isn't final but good enough to replace FSP version. * For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE and NORTHBRIDGE_INTEL_SANDYBRIDGE Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/29402 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19Documentation: Add W530 / T530Patrick Rudolph
Change-Id: Ib253308737f8c7a497c6ca13eab88220b1ac27ad Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-19util/bucts: Add tool to manipulate BUC.TS bit on Intel targetsArthur Heymans
The purpose of this tool is to manipulate and get information about the `Back Up Control, Top Swap` mechanism present on most Intel Southbridges. This tool is initially written by Peter Stuge. This tool makes it possible to have a backup mechanism for the bootblock by using the southbridges Back Up Control Top Swap. Sometimes it is also possible to circumvent vendor write protection mechanisms in order to flash coreboot. An example of where this would be useful would be the Lenovo Thinkpad X60 and T60. Change-Id: I12cc2e91396f096fc979e23848e1929cb6c44fc5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18224 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19src: Add required space after "switch"Elyes HAOUAS
Change-Id: I85cf93e30606bc7838852bd300a369e79370629a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-19cpu/intel/socket_mFCPGA478/Kconfig: Add MODEL_6{9,D}XElyes HAOUAS
Makefile.inc uses already model_6{9,d}x subdirs. Change-Id: I0bfc179a83fab85e5b924751e026d906d01b3fb6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-18soc/intel/.../Kconfig: Move GPIO debug option into debug menuNico Huber
Rename DEBUG_SOC_COMMON_BLOCK_GPIO to DEBUG_GPIO and move it into the Debugging menu. Change-Id: I737d0ee7fb5423b6d16d611a144d43fd3f168a2c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-18soc/intel/common/*/Kconfig: Remove redundant commentsNico Huber
Change-Id: Ide9608e487793fa4a8b0e291ba168126e0484355 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-18soc/intel/{cnl, icl}: Remove unnecessary __SIMPLE_DEVICE__ checkSubrata Banik
soc_pch_pirq_init() function is only getting compiled for RAMSTAGE hence remove unused __SIMPLE_DEVICE__ check. Change-Id: I7f0ca62170f0af12a251c8c97155de8433a31854 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-18mb/asus/p5qc: Add p5ql_pro mainboard as variantAngel Pons
Working: - SATA on southbridge ports - SATA on Marvell IDE controller ports - USB - COM1 - PS/2 keyboard - DDR2 DIMMs - PCIe x16 PEG port - PCIe x1 ports - PCI ports - NIC (MAC address needs to be set in Kconfig or in a CBFS file) - S3 resume - Green audio line out connector (the rest is untested) Not working: - Floppy port. Does not seem to be mainboard-specific, though. Untested: - EHCI debug TODO: - Add documentation Change-Id: I6ed434a691e8ef2a61e0acb1f986a59b8e1ad818 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/25691 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-18util/board_status: run dmesg with sudoPatrick Georgi
Newer kernels only allow root to access the kernel log buffer. In another case (cbmem) we use sudo to get past that, so we can expect sudo to be available here, too. Change-Id: I654422992e5ba1e98a786f65d50289efbcd46602 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/29670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-18sb/amd/{agesa,pi}/hudson/Kconfig: Remove unused HUDSON_FWMElyes HAOUAS
Change-Id: Ib621fe01a1d1d026153124a9d46f26e31df6d818 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-18mb/google/fizz/variants/karma: Increase Pmax to 151 for all SKUsDavid Wu
Needs to increase ROPmax to 80W (includes both panel and audio), hence the Pmax = 71W (PL4) + 80W (ROPmax) = 151W. BUG=b:119644629 BRANCH=master TEST=USE=fw_debug emerge-kalista chromeos-mrc coreboot chromeos-bootimage & ensure the Pmax value is passed to FSP-S. Change-Id: I504ff66a218bf4e385270c2cb385a83dca312a81 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-18siemens/mc_apl5: Add new mainboard variant mc_apl5Mario Scheithauer
This mainboard is based on mc_apl1. In a first step, it contains a copy of mc_apl1 directory with minimum changes. Special adaptations for mc_apl5 mainboard will follow in separate commits. Change-Id: Icdbb116a822ffa7a3bfb7026a5d1164db56a0c46 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-18util: Fix shebang for python2 scriptsAngel Pons
Python 3 is the default Python interpreter on most modern systems. Python 2 scripts must specify they should be run with Python 2 in their shebang. Solves issue raised in CB:28953. Change-Id: I9ace4afd668539c05e7ace30e255af50c7a069c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/29666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-18cpu/qemu-x86: Fix CPU driverPatrick Rudolph
There's a typo in the cpu driver causing it to always use the weak implementation defined in the devicetree instead of the real implementation. Tested on qemu-q35, the CPU driver contains valid values. Change-Id: I4a6bb447bfdb3df6053c0df8be9d7c6aa8f689be Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/29675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-17mb/intel/dg43gt: Add documentationArthur Heymans
Change-Id: I4e9dc67e66f719d440679b11332e2c8a764024f4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-17src/mb/asus/p5qc/gpio.c: Allow specifying a gpio.c in KconfigAngel Pons
Even though these two mainboards use the same gpio.c file, other boards such as the p5ql_pro do not. Change-Id: I2f7c8c12cb1bdcf47f3b4d4cef0b11e44a5b8863 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/29447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17intel/i945: Fix booting on a dual channel configurationPatrick Georgi
The register values in dram width programming changed in commit a4fc7bef7ffab0 which broke booting on getac/p470. TEST=getac/p470 with 2 X8DDS DRAM boots again Change-Id: I8b3eedc8c5234e8a28948d4dc58bf565024f62ce Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
2018-11-17soc/intel/icelake: Make static IRQ mapping for PIC modeSubrata Banik
This patch makes static PIRQ->IRQ mapping, where IRQ10 is mapped to PBRC and IRQ11 is mapped for PARC/PCRC/PDRC/PERC/PFRC/PGRC/PHRC. Change-Id: I9693f2a52529961e6b611b69e389f01f77f77d63 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17soc/intel/icelake: Make static IRQ mapping for ICP PCH pci devicesSubrata Banik
Since PIRQ->IRQ mapping registers PxRC are not available after FSP-S call due to PCH requirement change from CNP PCH onwards, hence making static IRQ mapping for pci_irqs.asl and pcie.asl Also remove unused irqlinks.asl from soc/intel/icelake/acpi/ Change-Id: Idec00c3b8a97cb5aa7b4000840aba914aea478c9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17treewide: use /usr/bin/env where appropriateYegor Timoshenko
Some Unix systems (GuixSD, NixOS) do not install programs like Bash and Python to /usr/bin, and /usr/bin/env has to be used to locate these instead. Change-Id: I7546bcb881c532adc984577ecb0ee2ec4f2efe00 Signed-off-by: Yegor Timoshenko <yegortimoshenko@riseup.net> Reviewed-on: https://review.coreboot.org/28953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-17mb/google/poppy/variants/nami: Invert FP MCU wake signalShelley Chen
GPP_D6 needs to be inverted to enter S0ix because FPMCU_INT_L is active low. Keeps device awake otherwise. BUG=b:119447525, b:115706071 BRANCH=Nami TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop into S0ix in the EC console. Change-Id: Iad5df124e2439bbdc078d6a33f8d0510d25ecf6f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/29650 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-17mb/google/sarien: Set SMBIOS mainboard SKUDuncan Laurie
Setting sku_id() is not enough to get a value to show up in the SMBIOS tables, it also needs to be returned as a string for the table creation to consume. This change defines the smbios_mainboard_sku() function and returns a string constant of "sku#" as expected. Change-Id: I03013bab89d53d1eba969c6ffb7e95fcbb315a81 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Trent Begin <tbegin@google.com>
2018-11-17soc/intel/cannonlake: Add options for pcie ltrLijian Zhao
FSP can support enable/disable Pci express LTR (Latency Tolerance Reporting) mechanism through upd interface. Include that into coreboot side. BUG=N/A TEST=N/A Change-Id: I69b423afa4f81a2d58375734bba07792e08931d5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29642 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16SMBIOS: Remove duplicated smbios_memory_type enumElyes HAOUAS
Change-Id: I49554d13f1b6371b85a58cc1263608ad9e99130e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-11-16{soc,sb}/amd: Remove unused SOUTHBRIDGE_AMD_*_SKIP_ISA_DMA_INITElyes HAOUAS
Change-Id: Ic9bca9a56663926a153b93c298f69ba7d26f6e5e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16util/cbsftool: allow enabling verbose make outputVadim Bendebury
Sometimes it is necessary to be able to see exact command lines used when compiling and linking. Use the same scheme as some other Makefile's - enable verbose output when variable V is set to 1. TEST=tried building cbfstool with V=1, observed verbose output. Change-Id: Iff25439aabff79e69d1d94a2c51c60bb0e0d7b80 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/29431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/google/octopus/variants/bobba: Set tcc offset for bobbaSumeet Pawnikar
Change tcc offset from 0 to 10 degree celsius for bobba. BUG=b:118099582 TEST=Cross verified the value using TAT UI. Change-Id: I68527c27635844f4edb0dda5f6018589d7bae297 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/29636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-16mb/google/poppy/variant/atlas: config GPP_F10 to use PLTRSTNick Vaccaro
GPIO's that use GPI_APIC setting with DEEP causes an IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over PLTRST to prevent IRQ storm after S3 resume and hence configuring GPP_F10 (HP_IRQ_GPIO) to use PLTRST. BUG=none TEST=none Change-Id: Idc6c42cb4dc6e8eb368d605c83f584f4c69077dc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/29540 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/siemens/mc_apl1/variants/mc_apl*: Remove unused BOARD_SIEMENS_MC_APL*_VARElyes HAOUAS
Change-Id: I6e911556abc7b7ac3573c5807b6453eecaff7e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-16src: Remove unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29302 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <cbfs.h>Elyes HAOUAS
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29303 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16util/gitconfig/test: Add commit-msg hook testAlex Thiessen
Add a test that, after cloning the repository to a temporary directory, installs git hooks and attempts to do a good and a bad commit, expecting the former to succeed and the latter to fail, thus testing the `commit-msg` hook. Change-Id: Icdaf0109c60cb5b6952b1a2468ab050a742e4201 Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/23281 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16util/docker: Rename _CONTAINER_VERSION => _IMAGE_TAGNico Huber
This is so confusing, let's name it what it is ;) Change-Id: I6f87e2f6912d886e241e03998fb4136fb28bc7b1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16util/docker: Use common .ccache for local buildsNico Huber
Bind a volume for .ccache to the `docker-run-local` targets. By default the current user's $(HOME)/.ccache will be used, it can be overridden via the DOCKER_CCACHE variable. Also rearrange some docker parameters to keep the target readable. Change-Id: I7d0bdb3861ac56361cacfa74aaf8b45c4f135e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mainboard: Add ASRock H81M-HDSTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This board works quite well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. The file `data.vbt` matches the VBT in the latest stable version of the vendor firmware (version 2.20). Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-16sb/intel/lynxpoint: Generate the ACPI FADT with a common functionTristan Corrick
The function `acpi_fill_fadt()` is based on that of sb/intel/bd82x6x. Tested on an ASRock H81M-HDS and a Google Peppy board, both using Linux 4.9 with `acpi=strict`. No ACPI errors or warnings appear in the kernel log. System reset, poweroff, and S3 suspend/resume continue to work. General improvements -------------------- - `fadt->preferred_pm_profile` is set based on the value of `CONFIG_SYSTEM_TYPE_LAPTOP` instead of being hardcoded. - Constants are used instead of magic values in more locations. - `fadt->gpe0_blk`, `fadt->gpe0_blk_len`, and `fadt->x_gpe0_blk` are set appropriately depending on whether the system uses Lynx Point LP or not. - Boards can indicate docking support in the FADT via the devicetree. Changes to existing Lynx Point boards ------------------------------------- - `header->asl_compiler_revision` changes from 1 to 0. - `fadt->model` is left at 0 instead of being set to 1. This field is only needed for ACPI 1.0 compatibility. - `fadt->flush_size` and `fadt->flush_stride` are set to 0. This is because their values are ignored, since `ACPI_FADT_WBINVD` is set in `fadt->flags`. - `fadt->duty_offset` is set to 0 instead of 1. None of the existing boards indicate support for changing the processor duty cycle (as `fadt->duty_width` is set to 0), so `fadt->duty_offset` does not currently need to be set. - Access sizes of registers are set. - On mb/intel/baskingridge, the pmbase is now read using the common function `get_pmbase()` instead of `pci_read_config16(...)`. - On mb/intel/baskingridge, the value of `fadt->x_gpe0_blk.bit_width` changes from 64 to 128. The correct value should be 128 (bits), to match `fadt->gpe0_blk_len`, which is set to 16 (bytes). - On Lynx Point LP systems, the unused extended address `fadt->x_gpe0_blk` sets its address space ID to be consistent with other unused extended addresses. Such a change should not alter the interpretation of the registers as being unused. Why not set them all to zero? Simply because the existing practice, in both coreboot and some other vendors' firmware, has them set in such a case. A diff of the FADT from a Google Peppy board is below: --- pre/facp.dsl 2018-10-30 20:14:52.676570798 +1300 +++ post/facp.dsl 2018-10-30 20:15:06.904381436 +1300 @@ -1,179 +1,179 @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20180810 (64-bit version) * Copyright (c) 2000 - 2018 Intel Corporation * - * Disassembly of facp.dat, Tue Oct 30 20:14:52 2018 + * Disassembly of facp.dat, Tue Oct 30 20:15:06 2018 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 000000F4 [008h 0008 1] Revision : 04 -[009h 0009 1] Checksum : 61 +[009h 0009 1] Checksum : 6E [00Ah 0010 6] Oem ID : "CORE " [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" -[020h 0032 4] Asl Compiler Revision : 00000001 +[020h 0032 4] Asl Compiler Revision : 00000000 [024h 0036 4] FACS Address : 7BF46240 [028h 0040 4] DSDT Address : 7BF46280 -[02Ch 0044 1] Model : 01 +[02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 02 [Mobile] [02Eh 0046 2] SCI Interrupt : 0009 [030h 0048 4] SMI Command Port : 000000B2 [034h 0052 1] ACPI Enable Value : E1 [035h 0053 1] ACPI Disable Value : 1E [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 [038h 0056 4] PM1A Event Block Address : 00001000 [03Ch 0060 4] PM1B Event Block Address : 00000000 [040h 0064 4] PM1A Control Block Address : 00001004 [044h 0068 4] PM1B Control Block Address : 00000000 [048h 0072 4] PM2 Control Block Address : 00001050 [04Ch 0076 4] PM Timer Block Address : 00001008 [050h 0080 4] GPE0 Block Address : 00001080 [054h 0084 4] GPE1 Block Address : 00000000 [058h 0088 1] PM1 Event Block Length : 04 [059h 0089 1] PM1 Control Block Length : 02 [05Ah 0090 1] PM2 Control Block Length : 01 [05Bh 0091 1] PM Timer Block Length : 04 [05Ch 0092 1] GPE0 Block Length : 20 [05Dh 0093 1] GPE1 Block Length : 00 [05Eh 0094 1] GPE1 Base Offset : 00 [05Fh 0095 1] _CST Support : 00 [060h 0096 2] C2 Latency : 0001 [062h 0098 2] C3 Latency : 0057 -[064h 0100 2] CPU Cache Size : 0400 -[066h 0102 2] Cache Flush Stride : 0010 -[068h 0104 1] Duty Cycle Offset : 01 +[064h 0100 2] CPU Cache Size : 0000 +[066h 0102 2] Cache Flush Stride : 0000 +[068h 0104 1] Duty Cycle Offset : 00 [069h 0105 1] Duty Cycle Width : 00 [06Ah 0106 1] RTC Day Alarm Index : 0D [06Bh 0107 1] RTC Month Alarm Index : 00 [06Ch 0108 1] RTC Century Index : 00 [06Dh 0109 2] Boot Flags (decoded below) : 0003 Legacy Devices Supported (V2) : 1 8042 Present on ports 60/64 (V2) : 1 VGA Not Present (V4) : 0 MSI Not Supported (V4) : 0 PCIe ASPM Not Supported (V4) : 0 CMOS RTC Not Present (V5) : 0 [06Fh 0111 1] Reserved : 00 [070h 0112 4] Flags (decoded below) : 00008CAD WBINVD instruction is operational (V1) : 1 WBINVD flushes all caches (V1) : 0 All CPUs support C1 (V1) : 1 C2 works on MP system (V1) : 1 Control Method Power Button (V1) : 0 Control Method Sleep Button (V1) : 1 RTC wake not in fixed reg space (V1) : 0 RTC can wake system from S4 (V1) : 1 32-bit PM Timer (V1) : 0 Docking Supported (V1) : 0 Reset Register Supported (V2) : 1 Sealed Case (V3) : 1 Headless - No Video (V3) : 0 Use native instr after SLP_TYPx (V3) : 0 PCIEXP_WAK Bits Supported (V4) : 0 Use Platform Timer (V4) : 1 RTC_STS valid on S4 wake (V4) : 0 Remote Power-on capable (V4) : 0 Use APIC Cluster Model (V4) : 0 Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 0 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 01 [SystemIO] [075h 0117 1] Bit Width : 08 [076h 0118 1] Bit Offset : 00 -[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] +[077h 0119 1] Encoded Access Width : 01 [Byte Access:8] [078h 0120 8] Address : 0000000000000CF9 [080h 0128 1] Value to cause reset : 06 [081h 0129 2] ARM Flags (decoded below) : 0000 PSCI Compliant : 0 Must use HVC for PSCI : 0 [083h 0131 1] FADT Minor Revision : 00 [084h 0132 8] FACS Address : 000000007BF46240 [08Ch 0140 8] DSDT Address : 000000007BF46280 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 01 [SystemIO] [095h 0149 1] Bit Width : 20 [096h 0150 1] Bit Offset : 00 -[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] +[097h 0151 1] Encoded Access Width : 02 [Word Access:16] [098h 0152 8] Address : 0000000000001000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 01 [SystemIO] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 [0ACh 0172 12] PM1A Control Block : [Generic Address Structure] [0ACh 0172 1] Space ID : 01 [SystemIO] [0ADh 0173 1] Bit Width : 10 [0AEh 0174 1] Bit Offset : 00 -[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy] +[0AFh 0175 1] Encoded Access Width : 02 [Word Access:16] [0B0h 0176 8] Address : 0000000000001004 [0B8h 0184 12] PM1B Control Block : [Generic Address Structure] [0B8h 0184 1] Space ID : 01 [SystemIO] [0B9h 0185 1] Bit Width : 00 [0BAh 0186 1] Bit Offset : 00 [0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy] [0BCh 0188 8] Address : 0000000000000000 [0C4h 0196 12] PM2 Control Block : [Generic Address Structure] [0C4h 0196 1] Space ID : 01 [SystemIO] [0C5h 0197 1] Bit Width : 08 [0C6h 0198 1] Bit Offset : 00 -[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy] +[0C7h 0199 1] Encoded Access Width : 01 [Byte Access:8] [0C8h 0200 8] Address : 0000000000001050 [0D0h 0208 12] PM Timer Block : [Generic Address Structure] [0D0h 0208 1] Space ID : 01 [SystemIO] [0D1h 0209 1] Bit Width : 20 [0D2h 0210 1] Bit Offset : 00 -[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy] +[0D3h 0211 1] Encoded Access Width : 03 [DWord Access:32] [0D4h 0212 8] Address : 0000000000001008 [0DCh 0220 12] GPE0 Block : [Generic Address Structure] -[0DCh 0220 1] Space ID : 00 [SystemMemory] +[0DCh 0220 1] Space ID : 01 [SystemIO] [0DDh 0221 1] Bit Width : 00 [0DEh 0222 1] Bit Offset : 00 [0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy] [0E0h 0224 8] Address : 0000000000000000 [0E8h 0232 12] GPE1 Block : [Generic Address Structure] [0E8h 0232 1] Space ID : 01 [SystemIO] [0E9h 0233 1] Bit Width : 00 [0EAh 0234 1] Bit Offset : 00 [0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy] [0ECh 0236 8] Address : 0000000000000000 Change-Id: I9638bb5ff998518eb750e3e7e85b51cdaf1f070e Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29387 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/google/poppy/variant/atlas: I2C: run trackpad at 1MHzCaveh Jalali
With this change, coreboot thinks we're running at 1MHz: DW I2C bus 2 at 0xd1133000 (1000 KHz) Elan eKT3644 IC Specification (trackpad) requires: Low Time larger than 500ns (61 * 8.3ns = 506ns). High Time larger than 260ns (32 * 8.3ns = 265ns), Data Hold_time larger than 0ns. Start Condition Hold time larger than 250ns. Rise/Fall time of less than 120ns. HCNT controls both High Time and Start Condition Hold time. LCNT controls Low Time. SDA_HOLD controls Data Hold Time. P2 Atlas "Rise time" is 90ns and "Fall time" is 32ns and tuned using resistors on the board and must be considered when adjusting any of the parameters since these times are all measured at 30 or 70% of base and peak voltages (0v/1.8v). The eKT3644 requirements are met with LCNT=69, HCNT=33, SDA_HOLD=20 which yields the SCL at around 950KHz - suboptimal but compliant. Lower LCNT or HCNT results in "lost arbitration" errors or not complying with eKT3644 requirements. Verified by gaggery.tsai@intel.corp-partner.google.com. Scope shots posted here: https://b.corp.google.com/issues/78601949#comment177 BUG=b:78601949 BRANCH=none TEST=Farzam provided test points on track pad for SCL/SDA/GND. Waveforms measured with oscilloscope and screen shots attached to bug (comment #177, #155, #100). Operate trackpad/touchscreen Review dmesg (kernel) output for correct speed, parameters, and no errors (e.g. "lost arbitration" or "host controller timeout") Change-Id: Iaf42ba7b8818b7cd9c8dcc657823dac705659d38 Signed-off-by: Caveh Jalali <caveh@chromium.org> Signed-off-by: Grant Grundler <grundler@chromium.org> Tested-by: gaggery.tsai@intel.corp-partner.google.com Tested-by: grundler@chromium.org Reviewed-on: https://review.coreboot.org/29553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-11-16mb/intel/whlrvp: Enable HDA controller driverLijian Zhao
Enable HDA controller coreboot driver for Whiskey Lake RVP platform on top of common code. BUG=N/A TEST=Build and boot up on whiskey lake rvp board, comfirm audio playback is working. Change-Id: I7daf1c741b92ff59b9cb4030d218e9c1054c4b79 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/28781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-11-16Linux/Linuxboot: share cmdline and initrd parserMarcello Sylvester Bauer
Merge the command-line and initramfs parser from 'a linux payload' and 'LinuxBoot'. GOAL: merge 'a Linux payload' and 'LinuxBoot' Change-Id: I2d2aef5d07453b98e115af6ee06318c690def785 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/29510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16soc/intel/denverton_ns/Kconfig: Remove unused HSUART_FUNCElyes HAOUAS
Change-Id: I1ec6f0687083c17314588c85af289b4b27c5441c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29598 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16amd/{nb/amdfam10,cpu/pi}/Kconfig: Remove unused symbolsElyes HAOUAS
Change-Id: I7019d70b7e6f8ae041a12d6bab83127e9e70868c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16soc/intel/common/Kconfig: Remove unused SOC_INTEL_COMMON_SMIElyes HAOUAS
Change-Id: Ic4ea1d681d2677880b155713c34152ac0861146b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/intel/cougar_canyon2: Fix SMBIOS_ENCLOSURE_TYPE symbolElyes HAOUAS
Change-Id: I9f4640ef040dc6a1d39ecb8b3378266e4dd5cec9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16soc/qualcomm/ipq{40xx,806x}/Kconfig: Remove unused MBN_ENCAPSULATIONElyes HAOUAS
Change-Id: I4cf5cd1d3bed7188590e4f143d8f14dc9e58b183 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-16soc/intel/{broadwell,skylake}: Remove unused SERIAL_CPU_INITElyes HAOUAS
Change-Id: I2296ab3c53a82ee990649e35e1370e1dd304e392 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/msi/ms9652_fam10: Remove unused VAR_MTRR_HOLEElyes HAOUAS
Change-Id: Ibbc010c9550c0a50b1e913e198f9b575107572fb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16mb/{google/cyan,intel/strago}: Remove unused DYNAMIC_VNN_SUPPORTElyes HAOUAS
Change-Id: I4d0df30255d006c0399dde1b3ba8ee513d98dc0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src/drivers/vpd: Remove unused VPD_DEBUGElyes HAOUAS
Change-Id: Iba838309f8055d364c5f846ce29e628067d7b5f5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src/mainboard: Remove unused "HW_MEM_HOLE_SIZE_AUTO_INC"Elyes HAOUAS
Change-Id: I10e89de270a20dbd28647e8b0f8a2425c515b350 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16mb/{lenovo,roda}: Remove DISPLAY_DEVICE_2_IS_LCD_SCREEN macroPeter Lemenkov
This macro is no longer used since commit dd2bc3f8 with Change-Id I556769e5e28b83e7465e3db689e26c8c0ab44757 ("igd.asl rewrite"). Change-Id: Iabf927d8462673cb96851c01318d826d4c422e0d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
2018-11-16mb/google/kalista: Disable EC-EFSDaisuke Nojiri
Only input from the BJ port is wired to VSYS on Kalista. VBUS from USB-C is for output only. In other words, Kalista is a source only device from a USB/PD perspective. This patch disables EC-EFS, which would be needed for the EC to jump to RW to get PD power before the AP boots. Kalista will be always supplied enough power to boot the AP through the BJ port. CQ-DEPEND=CL:1330171 BUG=b:118386511 BRANCH=none TEST=Boot Fizz. Verify normal boot, soft sync, recovery mode work. Change-Id: Icd18662ae1e76f35eb9bcd521b1951aacc713252 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/29564 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mediatek: Refactor PMIC wrapper code among similar SoCsTristan Shieh
Refactor PMIC wrapper code which will be reused among similar SoCs. Move reusable code into the common folder. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot Change-Id: I25acb6da49e72748d856804ef4f97e9ec3bef72d Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/29420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-16soc/intel/braswell: add vmx support via CPU_INTEL_COMMONMatt DeVillier
Braswell allready supported vmx, but offered no mechanism to unset it, nor to set the lock bit required for Windows to recognize virtualization. Enable this functionality by adding CPU_INTEL_COMMON config. Test: build/boot Windows 10 on Braswell ChromeOS device, verify Windows shows virtualization as enabled. Change-Id: I0d39abaeb9eebcceb37dc791df6b06e521fe1992 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/29570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Get rid of duplicated includesElyes HAOUAS
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16mb/google/poppy/variants/nautilus: Control GPP_D0 in 2nd SKU onlySeunghwan Kim
GPP_D0 is NC in 1st SKU board design, so we should control GPP_D0 for only 2nd SKU. BUG=none BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ifd85693c9155ed960f0c794d4b83fe8863b77134 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/29631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-16mb/google/poppy/variant/nocturne: Configure GPP_E1 for WLAN_WAKE_LNick Vaccaro
The GPP_E1 gpio was incorrectly being defined as a no-connect. Configure GPP_E1 for the WLAN_WAKE_L signal as per the schematic. BUG=b:119508897 TEST=Build and flash nocturne, boot nocturne and 1) Verify nocturne can successfully suspend/resume from S3 and S0ix. 2) Verify wake from wlan wakes device from S3 and S0ix. To do so, a) as root, execute "iw phy phy0 wowlan enable disconnect" on DUT b) connect DUT to mobile hotspot c) sleep device via "powerd_dbus_suspend" d) turn off hotspot, verify DUT wakes from S0ix e) enable hotspot again f) connect DUT to hotspot g) sleep DUT via "sudo echo mem > /sys/power/state" h) turn off hotspot, verify DUT wakes from S3 Change-Id: I4efb4f6d601e172ae4807901e3bd4c9954319f80 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/29630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-16src: Remove unneeded include <pc80/keyboard.h>Elyes HAOUAS
Change-Id: I0dcdfb1fa782c7936a19de11adcf17387f49d9db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16sb/amd/cs5536: Remove unneeded include <cpu/x86/bist.h>Elyes HAOUAS
Change-Id: Ifae9d67bbba57b30ee9a2f31c448efcb27981c57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16cbfstool: add unprocessed flag for file exportingJoel Kitching
Add an unprocessed flag (-U) which modifies how files are exported. In the case of a compressed raw file, extract without decompressing. In the case of a stage or payload, extract without decompressing or converting to an ELF. This can be useful for verifying the integrity of a stage or payload, since converting to an ELF may not be a deterministic process on different platforms or coreboot versions. BUG=b:111577108 TEST=USE=cb_legacy_tianocore emerge-eve edk2 coreboot-utils chromeos-bootimage cd /build/eve/firmware /build/eve/usr/bin/cbfstool image.bin extract -r RW_LEGACY \ -n payload -f /tmp/payload_1 -U START=$((16#`xxd -s 20 -l 4 -p tianocore.cbfs`)) SIZE=$((16#`xxd -s 8 -l 4 -p tianocore.cbfs`)) dd if=tianocore.cbfs skip=$START count=$SIZE bs=1 > /tmp/payload_2 diff /tmp/payload_1 /tmp/payload_2 rm /tmp/payload_1 /tmp/payload_2 Change-Id: I351d471d699daedd51adf4a860661877f25607e6 Signed-off-by: Joel Kitching <kitching@chromium.org> Reviewed-on: https://review.coreboot.org/29616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-16fsp_broadwell_de: Switch to common SPI controller driverWerner Zeh
The common SPI controller driver in src/southbridge/intel/common does match the SPI controller included in the PCH of Broadwell-DE SoC. Switch to the usage of this driver and delete the dedicated one for the FSP based Broadwell-DE implementation. TEST: Boot mc_bdx1 with SPI driver active in romstage Change-Id: I4fe8057ea1981e350659a5caa9912fb758110115 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/29633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16mb/*/*/Kconfig: Don't specify devicetree path if default val usedPeter Lemenkov
Change-Id: I3d77a625c5ece7b7ea5476fe0bd42829d1fc72c4 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29625 Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetreePeter Lemenkov
Change-Id: Ic9620cfa1630c7c085b6c244ca80dc023a181e30 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-16mb/cavium/cn8100_sff_evb: adjust fmapMarcello Sylvester Bauer
Adjust the default fmap description file. Tested on real hardware. Change-Id: I46165eb27314a500187bcd24e3e201cf6a3175e7 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/29596 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/lenovo/x60/dsdt: Remove unused includePeter Lemenkov
Tested - builds fine with this patch. Change-Id: I4666a8c9dd0e03ee32770844019dfc032e07e460 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
2018-11-16util/docker: Unify local build targetsNico Huber
Add a `docker-run-local` target that is used as a template for the local build targets (`docker-build-coreboot`, `docker-abuild`, and `docker-what-jenkins-does`). Note this changes the user for `docker-what-jenkins-does` which has (ccache) issues if it's not `root`. Will be fixed in a follow-up. Change-Id: I9088fb9211726cddc37b17ddf70170c2c382679e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16soc/amd: Convert from AMD units to coreboot unitsRichard Spiegel
There are several files under soc/amd that use units defined by file porting.h. These units use upper case, and are not recognized by checkpatch, thus causing problems when defining a pointer (request to use space before and after the star symbol). These are the definitions from porting.h showing the units that this patch will change and their coreboot definitions (not all are actually used): typedef uintptr_t UINTN; typedef int64_t INT64; typedef uint64_t UINT64; typedef int32_t INT32; typedef uint32_t UINT32; typedef int16_t INT16; typedef uint16_t UINT16; typedef int8_t INT8; typedef uint8_t UINT8; typedef char CHAR8; typedef unsigned short CHAR16; typedef unsigned char BOOLEAN; typedef void VOID; BUG=b:118775313 TEST=Build and boot grunt. Change-Id: Ic1bd64d6224a030a65d23decabf0e602cee02871 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16payloads/libpayload/drivers/storage: Get rid of void pointer mathRichard Spiegel
Pointer math with void pointers is illegal in many compilers, though it works with GCC because it assumes size of void to be 1. In this particular situation, dev->buf is already pointer to u8, and there's no need to convert to void *. BUG=b:118484178 TEST=Build libpayload. Change-Id: Ib70b8ce11abc88c35be4092f097cfff385921f46 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16util/cbfstool/cbfs_image.c: Get rid of void pointer mathRichard Spiegel
Pointer math with void pointers is illegal in many compilers, though it works with GCC because it assumes size of void to be 1. Change the pointers or add parenthesis to force a proper order that will not cause compile errors if compiled with a different compiler, and more importantly, don't have unsuspected side effects. BUG=b:118484178 TEST=Build CBFS with original code, run objdump and saved output. Added modifications, build cbfs again, run objdump again, compared objdump outputs. Change-Id: I30187de8ea24adba41083f3bfbd24c0e363ee4b8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16soc/amd/common: Remove unused variables of write_pci_cfg_irqs()Richard Spiegel
Function write_pci_cfg_irqs() has "no function" variables. One variable is set and never used, the other is only used to control a print. Remove them. BUG=b:117950052 TEST=Build grunt. Change-Id: Icd98db3e794e609b112f15979a3a00a2977a0fdb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16sb/amd: Remove dead assignment in SPI driverPaul Menzel
Value stored to 'cmd' is never read Change-Id: I794b6e12f5af272705cd996f7ca5099e9b9dbfc7 Found-by: scan-build from clang 6 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/29568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16sb/amd: Fix grammar in commentPaul Menzel
Change-Id: I478a59534ec997947855eb0ff228a0dd9e15a5a5 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/29567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16siemens/mc_apl4: Clean up ramstageMario Scheithauer
Currently, there is nothing for this mainboard to do in ramstage. Change-Id: Id74a5f3f0a0583dc6bc81044913b8bb83d3b0b93 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-16siemens/mc_apl4: Overwrite swizzle data for LPDDR4Mario Scheithauer
This mainboard is equipped with LPDDR4 modules. The corresponding memory swizzle data must be set for this purpose. Change-Id: I4017de0713f0df5e614086912fc39d8eb6562702 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Uwe Pöche <uwe.poeche@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-16mb/google/octopus: override smbios manufacturer name from CBIWisley Chen
BUG=b:118798180 TEST=emerge-octopus Change-Id: I241a76e3b55ad721c6c0176462c310bcca6b3c5d Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29503 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16ec/google/chromeec: add support for retrieving OEM nameWisley Chen
OEM name can be stored in CBI. This change can support for fetching the OEM name from CBI. BUG=b:118798180 TEST=Verified to get data from CBI Change-Id: I4938c4d60fcad9e1f43ef69cc4441d1653de7e24 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-15soc/intel/skylake/acpi/dptf: Add support for Multi-DPTF ProfileKarthikeyan Ramasubramanian
Currently mode-aware DPTF depends on Tablet Mode Switch to load the right table. This does not scale well with device types and configuration. This change helps to decouple the mode-aware DPTF from Tablet Mode Switch. This change allows ACPI to load the appropriate DPTF table based on the profile number as detected by EC. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ibffe9c58f970aec37aa74a040170c4cf559bab33 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29249 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-15google/chromeec/acpi/ec: Add support for Device DPTF Profile NumberKarthikeyan Ramasubramanian
In order to support Multi-DPTF profile, Device DPTF Profile Number is introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset 0x09. This bit field stays along with Tablet Mode Device flag. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 16:23:24 +0000