| Age | Commit message (Collapse) | Author |
|---|
|
Forgot to actually "flip the bit" in commit
ebc21d1 intel/sch: Switch to MMCONF_SUPPORT_DEFAULT
Change-Id: Ic095594acb08bae17a6443bc302eb8bfb1ce2083
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17640
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This pach sets the DPTF passive temperature trip point for CPU back to
95 degree celsius from 61 degree celsius as per previous thermal
optimizations (https://review.coreboot.org/#/c/16766/).
BUG=chrome-os-partner:60038
BRANCH=master
TEST=built, booted on Reef and verified the passive trip point
funtionality.
Change-Id: I83ce69b19a94e4ea8ebedfc06f259579ed6dd5d3
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/17598
Tested-by: build bot (Jenkins)
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the configuration for Samsung K4E8E324EB and assign it to RAM_CODE 5.
BUG=chrome-os-partner:58983
TEST=verified on Hana EVT.
Change-Id: Iea55eb393b21e37f36d454706531f588101ee651
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38d34ed0a0b420e1ab300a47b99035153be5b5d0
Original-Change-Id: I28724c1cf5cf12f47911a571c20280ddab4500d5
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/410926
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The purpose of this change is to enable serial output in
bootblock stage
Change-Id: I8e075f1e70d1a6598dfdc34931218f5af9637178
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/17359
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The devicetree parameter already existed without being
used in the code.
Change-Id: I99dd8bc7a9b2f3509a115a130062d462a62e33fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17614
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This allows to set the backlight PWM frequency and the
duty cycle in the devicetree instead of using a plain BLC_PWM_CTL
value.
Change-Id: I4d9a555ac7ea5605712c1fcda994a6fcabf9acf3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17597
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Id7c2b656f500c14f39d4492667ea461b9ca353b0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Program USB Overcurrent pins as per board schematics definition.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu from USB device.
Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
- Show number of threads being used to build.
- Show the version number of each package when skipping it.
- Show whether the tool is a host or target build.
Change-Id: I1134c08b417a731859e6b25fe38aecf01a85927b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17418
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
- Don't build the cmos.default file into cbfs if USE_OPTION_TABLE
isn't specified.
- Don't allow HAVE_CMOS_DEFAULT if HAVE_OPTION_TABLE isn't set.
Change-Id: I92401e892f09fc95d4b3fd7418cdbd10ed033fa8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17454
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fix-up for 696abfc
nb/intel/x4x: Fix and deflate `dimm_config` in raminit
It didn't fix the channel-number shifting issue as intended.
The channel index is either 0 or 1. DIMMs are counted from 0
to 3 where 0..1 covers channel 0, and 2..3 covers channel 1.
Since we have two DIMMs per channel, we have to multiply the
channel index by 2 (or shift it left by 1) to get the index
of the first DIMM in the channel. Finally, to get the offset
of a DIMM in the channel we take its index modulo 2 (again,
the number of DIMMs per channel).
Change-Id: I2784b0cb655bfe823bf5fa48b722623dfca1ddc3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17612
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We kept this value at it's default on the native graphics init path.
Maybe the Video BIOS path, too, I don't know if the VBIOS sets it.
The panel power sequencer uses the core display clock (CDCLK). It's
based on the HPLLVCO and a frequency selection we made during raminit.
The value written is the (actual divisor/2)-1 for a 100us timer.
v2: Fix unaligned mmio access inherited from Linux.
v3: Use MCHBAR8() instead. Also, the unaligned access might have
worked after all.
Change-Id: I877d229865981fb0f96c864bc79e404f6743fd05
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17619
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Current implementation checks for CONFIG_BOOTBLOCK_CONSOLE and then
initializes UART. If only CONFIG_BOOTBLOCK_CONSOLE
is enabled without enabling CONFIG_UART_DEBUG, there are
compilation issues. This is the case when using SIO UART for Skylake
DT platform. Hence initialize UART when CONFIG_UART_DEBUG is enabled
and not based on CONFIG_BOOTBLOCK_CONSOLE.
Also move BOOTBLOCK_CONSOLE out from UART_DEBUG to CPU_SPECIFIC_OPTIONS
as part of the fix needed.
Change-Id: Id422a55a68d64a06fc874bddca46b0ef5be6d596
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/17349
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With this the system falls back to sane default
settings when nvram is invalid.
Change-Id: Ie13fd01c4f8403cbedbd7497ad9012c30f494a69
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17042
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Set PL1 maximum power limit value back to 12W
(https://review.coreboot.org/#/c/16596/)
from 6W due to Intel's and thermal team's suggestion.
BUG=chrome-os-partner:60038
BRANCH=master
TEST=build, boot on electro dut and verify by thermal team member
Change-Id: I57ae29180962724fde72d522caa542f0f21d5922
Signed-off-by: Tim Chen <Tim-Chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/17574
Tested-by: build bot (Jenkins)
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17602
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I25019c6323b6e9de2e0ce19325266bf3e8f2e309
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17581
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I37d0b1ad84a95342015659d319ac4ce20e5717be
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17584
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- All of the symbols are in the .config, so if .config is include in
the search all of the symbols are always found.
- There are now some Kconfig symbols in the Documentation directory,
so that needs to be excluded.
- 3rdparty has lots of Kconfig symbols that are unrelated to what
is being searched for.
Change-Id: I0ff56d0a0916338a8b94f5210b8e0b3be5194f41
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Don't search for symbols in the payloads directory, except for specific
files that are actively added back to the search.
Change-Id: I6f28dc7dee040b8061fa5644066f3613367b6d84
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some methods like discover_402x assume an clear state.
Should fix fallback attempt raminit failures.
Change-Id: I7a6fe044c17f5e0dbfa0e9b9d2aed0c3b6ae3972
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17471
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: If4350da1c9a7af5228be01a063486433860781e0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17583
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I3967d1ff0623037efa66927843e0c47f408832d7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17582
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Otherwise errors similar to "touch: cannot touch
'${TARGETDIR}/.GMP.6.1.0.success': No such file
or directory" might occur.
Change-Id: I4f24c93a25b7d567d3ce14a0415d20fd0778c9c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17603
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
By shifting the `chan` right instead of left, values were always taken
from the DIMMs of the first channel. The diff-stat also looks like an
improvement.
Change-Id: I605eb4f9b04520c51eea9995a2d4a1f050f02ecc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17587
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
|
|
Commit 967cd9a [ChromeOS: fix Kconfig dependencies] broke keyboard
interrupts on parrot by making SERIRQ_CONTINUOUS_MODE conditional on
CONFIG_CHROMEOS, which it should not be; fix by moving back under main
board specific options config.
Additionally, Windows [8/8.1/10] fails to enumerate the keyboard when
its ACPI entry is located under the SIO device since it is missing an
_HID entry, so add the appropriate value per ACPI spec 5 ch. 9.7
Change-Id: Ia69e9b326001d2026b15b4ec03c94f7d03c8a700
Signed-off-by: Prabal Saha <coolstarorganization@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17017
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
MAX_ARGC_COUNT limits the payload to ten parameters which is not
enough when used with a proprietary first stage bootloader providing
hardware description using around 20 parameters.
This patch makes the libpayload able to get up to 32 parameters.
Change-Id: I49925040d951dffb9c11425334674d8d498821f2
Signed-off-by: Jeremy Compostella <jeremy.compostella@gmail.com>
Reviewed-on: https://review.coreboot.org/17467
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
AMD_ENABLE_STACK was not called on x86_64 path for AGESA, while
it was for binaryPI.
Comments on BIST and cpu_init_detected were reversed, so fix those
too.
Change-Id: I0ddfaf51feb386a56d488c29d60171b05ff6fbc4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17551
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Change-Id: I3d1a456f17073c99c9502da26e09cfde65380746
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17586
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Due to some LVDS cable constraints even and odd lanes needs
to be swapped on certain hardware. The hardware ID will be used to
distinguish between these two cases. The swapping itself will be done by
PTN3460, which is configurable for that.
Change-Id: I339b2321a8ed1bc3bbf10aa8e50eb598b14b15fa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/17576
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add the location of HWID field so that hwilib supports this
value as well.
Change-Id: If6d4695f861232231ac8f9c247c0a10410dac1c5
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/17575
Tested-by: build bot (Jenkins)
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Resetting a Realtek 8168 NIC only makes sense on targets that have
such a device.
Change-Id: I8ac9e8da1d8ecaacb19b4610a9b75f107915d691
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17577
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I021aae6130c475cb370b891ffaec6f1ad267540b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17580
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Combine existing board google/panther with new ChromeOS devices
mccloud, monroe, tricky, and zako, using their common reference board
(beltino) as a base.
Chromium sources used:
firmware-mccloud-5827.B 65bfee7 [haswell: No need pre-graphics delay...]
firmware-monroe-4921.B 1ac749d [Monroe: Disable KB/MS in ITE8772.]
firmware-tricky-5829.B 2db5322 [haswell: No need pre-graphics delay...]
firmware-zako-5219.B eacedef [haswell: No need pre-graphics delay...]
Existing google/panther board will be removed in a subsequent commit.
Variant setup modeled after google/reef
Change-Id: I5d7e0c2551e8b0707841032460c35615cefb2886
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17329
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Once #17329 is committed, no reason to have google/panther exist
as a separate board anymore.
Change-Id: I9a11273c39423d5ff33a7d1f91c8d8cffef97ec1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17538
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Runtime write acpi table for TPM driver.
Change-Id: I70896e5874c24f17fca0c48b138ad4917b273f5b
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17425
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Enable generic way of writing DSM method which can write acpi table for
multiple UUID's.
Change-Id: Ic1fbdc0647e8fdc50ffa407887feb19a63cb48e4
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17424
Tested-by: build bot (Jenkins)
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ieb5f1668a715ceadd5fe5ba0d121c865f1886038
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17572
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Asserts are only fatal if CONFIG_FATAL_ASSERTS is enabled in Kconfig.
By default this is disabled, so the assert is generally just a printf.
Die if someone decides to pass in an invalid bus number for some reason.
Addresses coverity issue 1349858 - Out-of-bounds read
Signed-off-by: Martin Roth <martinroth@google.com>
Change-Id: I9d79bc336cbbfde31f655cfd271f101e7a90ab1b
Reviewed-on: https://review.coreboot.org/17484
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If smbus_read_byte returned an error when reading the DIMM size,
this value would be used as an offset into an array.
Check for the error, and set the DIMM size to 0 if there's
a problem.
Addresses coverity issue 1229658 - Negative array index read
Signed-off-by: Martin Roth <martinroth@google.com>
Change-Id: I6461a0fae819dd9261adbb411c4bba07520d076d
Reviewed-on: https://review.coreboot.org/17485
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The lb_serial structure had some new entries added, which were not being
filled in.
Fill in the values so they're not undefined.
Addresses coverity error 1354778 - Uninitialized scalar variable
Change-Id: Ia7ce07f6e4e058c91c2e063f3225497271ef93ff
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17482
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The lb_serial structure had some new entries added, which were not being
filled in.
Fill in the values so they're not undefined.
Addresses coverity error 1354778 - Uninitialized scalar variable
Change-Id: I57f024c35f79397d0e9fd0c800b1b0f4075caac1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17483
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1ceea759a40d740503bde725ad6d72fab4aa7971
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17006
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The defines of device IDs reflects the vendor namespace
the ID has been allocated from.
Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17510
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Define early smbus functions that can be used by mainboard to fetch spd.
Change-Id: Id170b2b8e6fb3ebb147f37bf433a27d1162dc11c
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17433
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add declaration for smbus write. Early smbus access also needs smbus
write function specially to read spd for DDR4 wherein page has to be
switched by smbus write.
Change-Id: I246cbdf0b52923f01dd036f63df17bf9af043c9f
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17557
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points.
CPU passive point:57, critical point:90
TSR1 passive point:55, critial point:70
TSR2 passive point:65, critial point:80
2. Update DPTF TRT Sample Period.
CPU: 5s
TSR0: 50s
TSR1: 55s
TSR2: 120s
BUG=none
BRANCH=master
TEST=emerge-pyro coreboot
Change-Id: Ib1b4b31a49d9396b1c5c9dd8d0b9b9998d01744f
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/17552
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This removes brain, danger, emile, and romy from the tree.
This was cherry-picked from the chromeos-2016.02 branch (CL:345574),
but conflicts showed up in many files that were to be deleted anyway
possibly due to some widespread refactoring that was done between
then and now.
BUG=chromium:612660
BRANCH=none
TEST=none
Change-Id: Ie37140a9a4bb9d820a3fcbad6674b2fa737e1249
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1ebe5038a82162f6345e319de7578f26ccd68b73
Original-Change-Id: I11f7e0870916871d8f146a6871370ace76ddec49
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/412424
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17569
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: Ic474e17b70d64b63356a0ba7dd1649e5a6ff3a30
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17549
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
When IDSOPT_TRACING_ENABLED is TRUE build fails with
"cast from pointer to integer of different size"
Use "UINTN" as is done in Family 16h.
Change-Id: I362e67fc83aa609155f959535f33be9c150c7636
Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io>
Reviewed-on: https://review.coreboot.org/17406
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FPR is an attribute of the SPI flash component and not of the SPI bus
itself. Rename functions, file names and Kconfig option to make sure
this is conveyed correctly.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: I9f06f1a8ee28b8c56db64ddd6a19dd9179c54f50
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17560
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
flash_programmer_probe is a property of the spi flash driver and does
not belong in the spi_slave structure. Thus, make
spi_flash_programmer_probe a callback from the spi_flash_probe
function. Logic still remains the same as before (order matters):
1. Try spi_flash_programmer_probe without force option
2. Try generic flash probing
3. Try spi_flash_programmer_probe with force option
If none of the above steps work, fail probing. Flash controller is
expected to honor force option to decide whether to perform specialized
probing or to defer to generic probing.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
max_transfer_size is a property of the SPI controller and not of the spi
slave. Also, this is used only on one SoC currently. There is no need to
handle this at the spi flash layer.
This change moves the handling of max_transfer_size to SoC SPI driver
and gets rid of the max_transfer_size parameter.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17463
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
RW flag was added to spi_slave structure to get around a requirement on
some AMD flash controllers that need to group together all spi volatile
operations (write/erase). This rw flag is not a property or attribute of
the SPI slave or controller. Thus, instead of saving it in spi_slave
structure, clean up the SPI flash driver interface. This allows
chipsets/mainboards (that require volatile operations to be grouped) to
indicate beginning and end of such grouped operations.
New user APIs are added to allow users to perform probe, read, write,
erase, volatile group begin and end operations. Callbacks defined in
spi_flash structure are expected to be used only by the SPI flash
driver. Any chipset that requires grouping of volatile operations can
select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and
define callbacks for chipset_volatile_group_{begin,end}.
spi_claim_bus/spi_release_bus calls have been removed from the SPI flash
chip drivers which end up calling do_spi_flash_cmd since it already has
required calls for claiming and releasing SPI bus before performing a
read/write operation.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adds support for the MSI MS-7721 (FM2-A75MA-E35) motherboard.
Tested by building coreboot with:
- VGA bios (needed for onboard video)
- XHCI firmware
- SeaBIOS payload
CPU: AMD A8-6500 APU
RAM: 2x 2GB Samsung M378B5673EH1
Confirmed booting using:
- USB stick with Arch Linux (kernel 4.7.5)
- Gentoo live CD from SATA dvd drive
- Gentoo installation from SATA harddisk (kernel 4.4.26)
Change-Id: I757e011de01ca9f340fd524b10e7fa3f291d53e3
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
Reviewed-on: https://review.coreboot.org/17495
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds a copy of the Asus F2A85-M code with only minimal changes.
(to ensure that the code compiles)
A second commit will be published to remove the copied code parts that
don't apply to the MS-7221 and to make everything else actually work
on the MS-7221 board.
Change-Id: I1426c0876c7bfeb264231c0d338301133c721484
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
Reviewed-on: https://review.coreboot.org/17494
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Time spent in printk() is highly unpredictable, depending of the
enabled consoles. If only CBMEM console is enabled, debugstring
is repeated tens of times, consuming preram_cbmem_console storage.
Change-Id: I2b0d9bd11c294d988a0eb84b90e77d5cc7f1f848
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17516
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Untested, only affected board is iwave/iwRainbowG6.
Change-Id: Ie3c40ede85c9f89b54804dd2a411645be93911bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17528
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT.
Platforms that remain to have explicit MMCONF_SUPPORT are
ones that should be converted.
Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17527
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Note: Platforms have no MMCONF_SUPPORT_DEFAULT.
Change-Id: I8a02ea78957fca23b1cf161a00d5e3edda73d683
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17543
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This motherboard support Intel core 2 quads.
Before this change SeaBIOS was not usable, due to it crashing before it
got to load anything.
Change-Id: Ifdaaceace04f9ba0753aab2d3b05c0519367f91f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17537
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Obtained from vendor bios DSDT, under "Device (HUB0),
Name (_ADR, 0x001E0000)".
The schematics also indicate that the INTA-D are hardwired to these
PIRQ lines.
Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17099
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The cbmem routines pass back NULL on error. Check for this before using
the pointer.
Addresses coverity issue 1365731 - Dereference null return value
Change-Id: I92995366ffb15afd0950b9a8bbb6fe16252b2c38
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17480
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If no maximum string length is specified, we're intentionally passing a
value of -1 to get the string length so that it's not limited. This
makes checking tools unhappy, so actively cast it to size_t before
passing it into strlen to show that it's not an accident.
Addresses coverity issue 1129133 - Argument cannot be negative
Change-Id: I40f8f2101e170a5c96fcd39c217aa414f4316473
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17479
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I4a8297397d878e38516c8df19dd311c7ef19ec06
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17478
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Stage cache will save ~20ms on S3 resume for apollolake platforms.
Implementing the cache in ramstage to save silicon init and reload
it on resume. This patch adds passing S3 status to silicon init in
order to verify that the wake is from S3 and not for some other
reason. This patch also includes changes needed for quark and
skylake platforms that require fsp 2.0.
BUG=chrome-os-partner:56941
BRANCH=none
TEST=built for reef and tested boot and S3 resume path saving 20ms
Change-Id: I99dc93c1d7a7d5cf8d8de1aa253a326ec67f05f6
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/17460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use a unique bus/device/function if a bay trail LPC bridge was found.
TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP.
Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17464
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I35c4340cf14ca1609ce3bfcac78cc4e286eff34a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17326
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I33e41b745e7ec55ed39d7125fc74b1619d28bb54
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17325
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is a stopgap for when you use SUPERIO_SMSC_SMSCSUPERIO and the
interrupt is unmapped at reset, but for whatever reason the chip is
inaccessible in smscsuperio/superio.c::enable_dev() and thus the
devicetree.cb IRQ information is not applied in ramstage and then
serial console output fails to work for more than the UART FIFO depth
in the OS.
Change-Id: I00998088975569516f7caeb7f4098b48fe437889
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: https://review.coreboot.org/10807
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently, the coreboot log of a Lenovo X60, not having any IDE devices
connected, there is a trailing whitespace in the output.
[…]
PCI: 00:1f.1 init ...
i82801gx_ide: initializing...
PCI: 00:1f.1 init finished in 11 usecs
[…]
Reorder the whitespaces, so they are added when needed.
Change-Id: I640e514c89fe0246a847d1fd088def1c88e864f8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/11870
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some X200 use a 4 MiB SOIC-8 flash chip.
Change-Id: Ie5bd359ef08cf1be369a026be376c21555d0ea18
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Reviewed-on: https://review.coreboot.org/8391
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is mismatch of VENDOR_ID_AMD with DEVICE_ID_ATI, also
the device IDs have not been defined.
Change-Id: I3076cb08e3181e7f86de38deb18f1661f037bc38
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17508
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There is mismatch of VENDOR_ID_AMD with DEVICE_ID_ATI, also
the device IDs have not been defined.
Change-Id: I0d85893169fe877e384746931605f563c50308b2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17509
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Broken since March 2010, looking for incorrect PCI VENDOR.
Change-Id: I1960aa168e59364ad962f00c81b67b8bdc5773ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17514
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Broken since February 2008, looking for incorrect PCI VENDOR.
Change-Id: I6935683a8a7428ca9b2e90bcc0a090c3865ffd33
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17513
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
It's very dangerous to set bus master enable, and more so on
a NIC, where random broadcast packets can end up in memory
in unexpected ways.
If your kernel has trouble with the fact that we do not set
bus master enable, you need to fix your kernel.
Change-Id: If07fde7961ad80125567240cb43db036346bef97
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17559
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: build bot (Jenkins)
|
|
When running with relocatable ramstage, the gdt loaded from c_start.S
is already in CBMEM (high memory). Thus, there's no need to create
a new copy of the gdt and reload.
Change-Id: I2750d30119fee01baf4748d8001a672d18a13fb0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17504
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
I guess it was dropped because its concept was misunderstood. The idea
is to always have it set to `Yes` in the cmos.default. Users can then
ack the loading of the defaults by setting it to `No`. If the defaults
ever get loaded again, they'll be notified by the default `Yes`.
Change-Id: I1aa6d75bd5aa153c7b11a6b74564272eaa7cc523
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17355
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The embedded-controller interface of Roda's Ivy Bridge notebooks is
supposedly programmed by AMI.
Change-Id: I153d831fcea8a3132c7bd1927ff3b445d9a8e92c
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17288
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
The maximum supported rate is 12MHz. Only tested with 4MHz though,
since I couldn't set anything higher on my Linux receiver. But that
works fine with another FT*232H as receiver, whoosh.
Change-Id: Ie39aa0170882ff5b4512f0349f6f86d3f0b86421
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17477
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fix regression with commit:
7dc4b84 device/dram/ddr3: Calculate CRC16 of SPD unique identifier
Misplaced parenthesis causes CRC check failure, potentially
rendering some platform unbootable.
Change-Id: I9699ee2ead5b99c7f46f6f4682235aae3125cca6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17550
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
o The first 4G of physical address space is now mapped at 0.
o The first 4G of physical address space is now mapped at 1 << 38.
o The first 2G of DRAM (2 - 4 GiB of physical address space)
is now mapped at the top of memory save for the last 4K
i.e. at 0xffffffff80000000, with SBI page at the very top.
Of these, we hope to remove the *most* of the
last one once the gcc toolchain
can handle linking programs that can run at "top 33 bits
of address not all ones (but bit 63 set)". The 4K mapping
of the top of the 64 bit address space will always remain,
however, for SBI calls.
Change-Id: I77b151720001bddad5563b0f8e1279abcea056fa
Reviewed-on: https://review.coreboot.org/17403
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
When MRC cache is available, first read only the SPD unique
identifier bytes required to detect possible DIMM replacement.
As this is 11 vs 256 bytes with slow SMBus operations, we save
about 70ms for every installed DIMM on normal boot path.
In the DIMM replacement case this adds some 10ms per installed DIMM
as some SPD gets read twice, but we are on slow RAM training boot path
anyways.
Change-Id: I294a56e7b7562c3dea322c644b21a15abb033870
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17491
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
For S3 resume path SPD is only used for DIMM replacement detection.
As this detection already fails in the case of removal/insertion of
same DIMM, we can rely on cbmem_recovery() failure alone to force
system reset in case someone accidentally does DIMM replacements while
system is suspend-to-ram stage.
Skipping DIMM replacement detection allows skipping slow SPD loading,
thus reducing S3 resume path time by 80ms for every installed DIMM.
Change-Id: I4f2838c05f172d3cb351b027c9b8dd6543ab5944
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17490
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Take the timestamp before SPD loading takes place, for easier
comparison against MRC blob performance and followup changes
will optimize some of the slow SPD/SMBus operations.
Change-Id: I50b5a9d02d2caf4c63e1a4025544131a085b8fb6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17489
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Switch to use CRC of unique identifier section SPD[117..127],
remaining area of SPD data is ignored.
Change-Id: If4b43183f99f5f911ae6c311b43c29a72b9922e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17487
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Specification allows for the unique identifier bytes 117..125
to be excluded of CRC calculation. For such SPD, the CRC
would not identify replacement between two identical DIMM parts,
while memory training needs to be redone.
Change-Id: I8e830018b15c344d9f72f921ab84893f633f7654
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17486
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Compiled romstage is over 64kiB and exceeded XIP_ROM_SIZE,
so it was not entirely set WRPROT cacheable.
Reduces first boot raminit (including training) time by 400ms.
Change-Id: I5c4cbf581fc845150f207087c1527338ca364f60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17488
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update the DPTF parameters based on thermal test result.
1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points.
CPU passive point:61
TSR0 passive point:120, critial point:125
TSR1 passive point:46, critial point:75
TSR2 passive point:100, critial point:125
2. Update PL1/PL2 Min Power Limit/Max Power Limit
Set PL1 min to 3W, and max to 6W
Set PL2 min to 8W
3. Change thermal relationship table (TRT) setting.
Change CPU Throttle Effect on CPU sample rate to 80secs
Change CPU Effect on Temp Sensor 0 sample rate to 120secs
The TRT of TCHG is TSR1, but real sensor is TSR2.
Change Charger Effect on Temp Sensor 2 sample rate to 120secs
Change CPU Effect on Temp Sensor 2 sample rate to 120secs
BUG=chrome-os-partner:60038
BRANCH=master
TEST=build and boot on electro dut
Change-Id: I7a701812cb45f51828a3cbb3343e03817645110e
Signed-off-by: Tim Chen <Tim-Chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/17466
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Also memset info.dimm as it contains decoded SPD timings
used to calculate common timings.
Tested manually on Lenovo T420.
Change-Id: I659e5bc2a6cbadd9539931ee00ddea0a5253295f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17473
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
No need to find the same CMD rate for all channels.
Allow different CMD rates for every channel.
Tested on Lenovo T420 with different modules on each channel.
No regressions found.
Change-Id: I7036275ae89335dd3549ec392fa64824355b3cbf
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17472
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use register names found on forums.corsair.com.
No functionality changed.
Change-Id: Ibaede39a24e8df1c4d42cb27986ab66174b7d45b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17400
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Locking the PLL again once it's locked doesn't work.
The MRC doesn't do this, for some reason.
Remove fallback attempts of lowering DDR frequency.
Change-Id: Iccb54fa7d7357a22182dd26bd5b49c4073c04dc9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17399
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As documented in DDR3 spec for MR2 the CWL is based on DDR frequency.
There's no to little difference for most memory modules operating at DDR3-1333.
It might fix problems for memory modules that operate at a higher frequency and
memory modules with low CL values should work even better.
Tested on Lenovo T420 with DDR3-1333 CL9 and DDR3-1600 CL11.
No regressions found.
Change-Id: Ib90b5de872a219cf80b4976b6dfae6bc02e298f4
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17389
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
On S3 resume path, CBMEM_ID_GDT already exists but we only printed
the final "ok" string. Always tell GDT is about to be moved.
Change-Id: Ic91c5389cf4d47d28a6c54db152c18541c413bc1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17500
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SPD data alone consumes 0x400 of pre-ram stack, so the guard was
initially set too high, printing spurious "smashed stack detected"
messages at end of romstage.
Use the same stack size as haswell.
Change-Id: I24fff6228bc5207750a3c4bf8cf34e91cf35e716
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17501
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
vboot_handoff.c is the only place that needs the vb2 internals.
Provide it in the one place it is actually required instead of
pulling in the headers unnecessarily in common code. There is,
however, still a need to get the vb2 hashing types for a function
declaration.
Change-Id: I038fda68b1cd05fa2e66135158e5e2d18567563a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17475
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The wrong value was used for reporting an error when a requested
bus speed was made that isn't supported. Use the requested value.
Change-Id: I6c92ede3d95590d95a42b40422bab88ea9ae72a1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17474
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
If the SoC clock speed is not supported there is supposed to
be an error printed. However, the value printed was wrong which
was dereferencing a NULL struct. Fix that.
Change-Id: I5021ad8c1581d1935b39875ffa3aa00b594c537a
Found-by: Coverity Scan #1365977
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17468
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
