summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-11soc/intel/skylake: Use LPSS common libraryAamir Bohra
Use lpss common library to program reset and clock register for lpss modules. Change-Id: I198feba7c6f6d033ab77ed25a5bd9ea99411a1e4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19153 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-11Documentation: Reflow Kconfig.mdMartin Roth
The original document was written and committed with no regard to line lengths. This makes it easier to write. Now it needs to be easier to read, so wrap the lines at 80 characters where possible. - A couple of headings had to be rewritten to keep them under 80 characters. This required the addition of a new paragraph that had the old header. - Remove URL text that was just duplicating the URL. - All other text is the same, just wrapped. Change-Id: I44833c28750714fccb87296868c1ff78ab7f1d07 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19076 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-04-11sb/intel/i82801gx: Add i2c_block_read to smbus.hArthur Heymans
Using i2c_block_read speeds up reading SPD four to fivefold compared to sequential byte read. TESTED on Intel D945GCLF. Change-Id: I6d768a2ba128329168f26445a4fca6921c0c8642 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18927 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-11scarlet/gru: skip display because mipi driver not readyShunqian Zheng
Scarlet don't have eDP and MIPI driver is not ready, skipping display for now or else Scarlet would be stuck in reading eDP HPD because there even not power for it. TEST=boot to kernel on Scarlet Change-Id: I02ab4ef21bf77b98414f537aca57b46c11922348 Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/19237 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-11google/eve: Limit memory SKU 5 to 1600MHzDuncan Laurie
Due to issues with stability limit the SKU with K4EBE304EB-EGCF memory to 1600MHz instead of 1866MHz. BUG=b:37172778 BRANCH=none TEST=pass stress testing on devices with this memory Change-Id: I02af7e9c35e2c5b0b85223d58025cbd29841d973 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19227 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10nb/amdk8/(pre_)f.h: Don't declare global variable in headerArthur Heymans
This is needed if one wants to use the header more than once. Change-Id: I375d08465b6c64cd91e7563e3917764507d779ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19029 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-10soc/intel/common/block: Add LPSS function libraryAamir Bohra
LPSS function library implements common register programming under lpss. Change-Id: I881da01be8191270d9505737f68a6d2d8cd8cc69 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19001 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/apollolake: Use RTC common codeSubrata Banik
This patch uses common RTC library to enable upper 128 byte bank of RTC RAM. Change-Id: I55e196f6c5282d7c0a31b3980da8ae71764df611 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18700 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/skylake: Use RTC common codeSubrata Banik
This patch uses common RTC library to enable upper 128 byte bank of RTC RAM. Change-Id: Ibcbaf5061e96a67815116a9f7a03be515997be6d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18701 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/common/block: Add Intel common RTC code supportBarnali Sarkar
Create Intel Common RTC code. This code currently only contains the code for configuring RTC required in Bootblock phase which has the following programming - * Enable upper 128 bytes of CMOS. Change-Id: Id9dfcdbc300c25f43936d1efb5d6f9d81d3c8453 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/apollolake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Iacbf58dbd55bf3915676d875fcb484362d357a44 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18673 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/skylake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Id9336883514298e7f93fbc95aef8228202aa6fb9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/common/block: Add Intel common PCR supportSubrata Banik
IOSF_SB message space is used to access registers mapped on IOSF-SB. These registers include uncore CRs (configuration registers) and chipset specific registers. The Private Configuration Register (PCR) space is accessed on IOSF-SB using destination ID also known as Port ID. Access to IOSF-SB by the Host or System Agent is possible over PSF via the Primary to Sideband Bridge (P2SB). P2SB will forward properly formatted register access requests as CRRd and CRWr request via IOSF-SB. Change-Id: I78526a86b6d10f226570c08050327557e0bb2c78 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18669 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10google/eve: Update I2C bus timingDuncan Laurie
Update the I2C rise/fall timings based on newly measured values on a new board with updated pull-up resistor values. Touchscreen: rise time 98ns, fall time 38ms Touchpad: rise time 111ns, fall time 41ns TPM: rise time 112ns, fall time 34ns BUG=b:35583133 BRANCH=none TEST=Each I2C bus frequency was verified on a scope to be ~400MHz Change-Id: Ibb3a15fa0cc862f36c1b9c63ac7847221020c4c0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19202 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-09drivers/spi: Get rid of spi_get_configFurquan Shaikh
There is only one user for spi_get_config i.e. SPI ACPI. Also, the values provided by spi_get_config are constant for now. Thus, get rid of the spi_get_config call and fill in these constant values in SPI ACPI code itself. If there is a need in the future to change these, appropriate device-tree configs can be added. BUG=b:36873582 Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-08arch/x86: remove CAR global migration when postcar stage is usedAaron Durbin
When a platform is using postcar stage it's by definition not tearing down cache-as-ram from within romstage prior to loading ramstage. Because of this property there's no need to migrate CAR_GLOBAL variables to cbmem. Change-Id: I7c683e1937c3397cbbba15f0f5d4be9e624ac27f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19215 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-08AGESA: Add helpers to track heap relocationKyösti Mälkki
Change-Id: Ib43e59e4d4ee5e48abf7177b36cb06fdae40bde9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-08AGESA f14: Fix memory clock register decodingKyösti Mälkki
Bottom five LSBs are used to store the running frequency of memory clock. Change-Id: I2dfcf1950883836499ea2ca95f9eb72ccdfb979c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19042 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-08ec/roda/it8518: Do EC write manually with long timeoutNico Huber
The EC may take very long for the first command on a cold boot (~180ms witnessed). Since this needs an incredibly long timeout, we do this single command manually. Change-Id: I3302622a845ac6651bc7f563370d8f0511836f94 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18707 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-08ec/acpi: Add function to read EC status registerNico Huber
Change-Id: I7b690d1f23ecf4083952c173be1d3a1246bc1593 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18706 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-08libgfxinit: Select CONFIG_VGA when neededNico Huber
This wasn't caught earlier because many boards select it manually. Change-Id: I245ef8f44923b5384123bd549570db7c348e03b8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18771 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-083rdparty/libgfxinit: Update submodule pointerNico Huber
Some renamings force us to update our code: * Scan_Ports() moved into a new package Display_Probing. * Ports Digital[123] are called HDMI[123] now (finally!). * `Configs_Type` became `Pipe_Configs`, `Config_Index` `Pipe_Index`. Other noteworthy changes in libgfxinit: * libgfxinit now knows about ports that share pins (e.g. HDMI1 and DP1) and refuses to enable any of them if both are connected (which is physically possible on certain ThinkPad docks). * Major refactoring of the high-level GMA code. Change-Id: I0ac376c6a3da997fa4a23054198819ca664b8bf0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18770 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-07KBL: Update FSP headers - upgrade to FSP 2.0.0Balaji Manigandan B
Updating headers corresponding to FSP 2.0.0 Below UPDs are added to FspmUpd.h * PeciC10Reset * PeciSxReset rest of the changes are update to comments CQ-DEPEND=CL:*340004,CL:*340005,CL:*340006 BUG=None BRANCH=None TEST=Build and test on Poppy Change-Id: Id8ecea6fa5f4e7a72410f8da535ab9c4808b3482 Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com> Reviewed-on: https://review.coreboot.org/19109 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-07soc/intel/skylake: Enable XHCI clock gate control in ACPINaresh G Solanki
Enable SS link trunk clock gating & D3hot when device enters D3 state. Similarly disable SS link trunk clock gating & D3hot when device enters D0 state TEST=Build & boot Poppy board. Check working for XHCI wake when DUT is in S3. Change-Id: Ida2afa2e5f9404c0c15d7027480a28a003ad9a40 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18879 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-07intel/minnow3: Clean up Kconfig, devicetree and FMAPBrenton Dong
This patch cleans up the code by: o adding necessary default definitions to Kconfig o removing incorrect definitions from devicetree o removing irrelevant entries from FMD file devicetree.cb and minnow3.fmd carried over a lot of code from google/reef which is not correct for Minnow3 hardware. Minnow3 is not intended to boot Chrome OS and does not need Chrome related flash regions. The erroneous code is removed. These changes are the same as those done for leafhill in commit: 6a48923 mainboard/intel/leafhill: Clean up This was tested by building with the new configuration and booting to UEFI Payload Change-Id: I620dcbcd622f9326917c74b2a38984d9e49cff2b Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/18963 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-07mainboard/intel: Fix checkpatch errors in minnowmaxMartin Roth
This fixes the following issues, with no functional changes: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" ERROR:SPACING: space required after that ',' (ctx:VxV) WARNING:LONG_LINE_COMMENT: line over 80 characters WARNING:SPACE_BEFORE_TAB: please, no space before tabs ERROR:FUNCTION_WITHOUT_ARGS: Bad function definition ERROR:SPACING: space prohibited before that close parenthesis ')' WARNING:RETURN_VOID: void function return statements are not generally useful 2 unfixed issues: ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses Verified that the binary was the same before and after the changes. Change-Id: Ie9afb50e268f4140872e39fe8bede231a43d5cc6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19078 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: York Yang <york.yang@intel.com>
2017-04-07nb/intel/i945: Move INTEL_EDIDPatrick Rudolph
All boards select INTEL_EDID, move it to nb folder. Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19086 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-07libpayload: Add gru configPaul Kocialkowski
This adds a gru libpayload config, that should fit all gru-based devices such as kevin. As gru-based devices are CrOS devices, select the associated config to enable CrOS-specific features. Change-Id: I6e79b763fc497c126612b8786a669a33b57ea29f Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/19137 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-07nb/intel/sandybridge/raminit: Fix odt stretchPatrick Rudolph
Move odt stretch into own function. Apply workaround on SandyBridge C-stepping CPU only. Apply odt stretch on all other CPU types. Don't depend on empty DIMM detection, as in case one slot is empty ref_card_offset is zero. Change-Id: I4320f14e0522ec997b1f9f3b12ba2c2070ee8e9e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17616 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-07nb/intel/sandybridge/raminit: Always run quick_ram_checkPatrick Rudolph
quick_ram_check doesn't change contents of memory. Run it in S3 resume, too. Change-Id: Icaf3650fadbb3bb87d8c780a9e79737c3cf7eb06 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17615 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-07nb/intel/sandybridge/raminit: Reduce log levelPatrick Rudolph
Silency noisy raminit logging by: * Removing verbose logging from loops. * Printing detailed summary at end of loop instead. * Using the same scheme already present in some functions. Change-Id: I412d81592436ac0d2422caf396c64e0c34acc2d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17611 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-07nb/intel/sandybridge/raminit: Fix normalize_trainingPatrick Rudolph
Remove cross rank/cross channel dependency. I guess this is a mistake that could lead to instabilities. Tested on Lenovo T430 (Intel IvyBridge). Change-Id: I899db907cd2d2197fd81eda4c4656fb1e570c18f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17610 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins)
2017-04-07mb/lenovo/x201: Link gpio map instead of including a headerArthur Heymans
Linking should allow to link depending on possible future variants. E.g. in Makefile.inc romstage-$(CONFIG_'VARIANT0') += gpio_variant0.c etc. Change-Id: I88b5ef8e12ac606751952a493f626e1b146e98f7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-04-06northbridge/amd/stoney: Add FT4 packageMarshall Dawson
Add package options to the CPU Kconfig that may be selected by the mainboard's Kconfig file. Stoney Ridge is available in FP4 and FT4 packages and each requires a unique binaryPI image. Default to the correct blob used by the northbridge by looking at the CPU's package. Also modify Gardenia to select the right package. See the Infrastructure Roadmap for FP4 (#53555) and FT4 (#55349) for additional details for the packages. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 7b8ed7b732b7cf5503862c5edc6537d672109aec) Change-Id: I7bb15bc4c85c5b4d3d5a6c926c4bc346a282ef27 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18989 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-06amd/gardenia: Move OemPostParams() to correct fileKyösti Mälkki
The term 'callout' has a specific meaning in AGESA, meaning invoking the said function from AGESA / PI proper. OemPostParams() does not fall into that category. Change-Id: I0ad1cbf244501207af96e0ac415a5b80ced91052 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-04-06amd/bettong: Move OemPostParams() to correct fileKyösti Mälkki
The term 'callout' has a specific meaning in AGESA, meaning invoking the said function from AGESA / PI proper. OemPostParams() does not fall into that category. Change-Id: I45913d93323b3813fc35b1dd1fdca3d782d4b01f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19140 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-04-06gru: Initialize I2C bus for ARC2C0608Philip Chen
BUG=b:35583511 TEST=check i2c bus 0 initializes from ap console log Change-Id: Ibb6709159f5ed28ad0b62397d2ddb504dec55167 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19105 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-06AGESA f14: Fix MemContext buffer parser for AmdInitPost()Kyösti Mälkki
Memory training data that is saved as part of S3 feature in SPI flash can be used to bypass training on normal boot path as well. When RegisterSize is 3 in the register playback tables, no register is saved or restored. Instead a function is called to do certain things in the save and resume sequence. Previously, this was overlooked, and the pointer containing the current OrMask was still incremented by 3 bytes. Change-Id: I7221a03d5a4e442817911ba4862e3c0e8fa4a500 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-06northbridge/via/cn700: Get rid of #include raminit.cLubomir Rintel
Using linker instead of '#include *.c'. Change-Id: Ie1bc538aa29c4f18dd6f31a83d3da58f196f2078 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/19081 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-06soc/intel/skylake: Add support for GSPI controllerFurquan Shaikh
Sky Lake PCH contains two GSPI controllers. Using the common GSPI controller driver implementation for Intel PCH, add support for GSPI controller buses on Sky Lake/Kaby Lake. BUG=b:35583330 Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-06soc/intel/common: Add support for common GSPI controllerFurquan Shaikh
Add support for GSPI controller in Intel PCH. This controller is compliant with PXA2xx SPI controller with some additional registers to provide more fine-grained control of the SPI bus. Currently, DMA is not enabled as this driver might be used before memory is up (e.g. TPM on SPI). Also, provide common GSPI config structure that can be included by SoCs in chip config to allow mainboards to configure GSPI bus. Additionally, provide an option for SoCs to configure BAR for GSPI controllers before memory is up. BUG=b:35583330 Change-Id: I0eb91eba2c523be457fee8922c44fb500a9fa140 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19098 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05soc/intel/lpss: Provide common LPSS clock configFurquan Shaikh
Since there are multiple controllers in the LPSS and all use the same frequency, provide a single Kconfig option for LPSS_CLOCK_MHZ. BUG=b:35583330 Change-Id: I3c0cb62d56916e6e5f671fb5f40210f4cb33316f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05drivers/spi/tpm: Allow TPM_SPI to be used with PC80_SYSTEM.Furquan Shaikh
In order to be able to use SPI TPM on x86, allow TPM_SPI to be used with PC80_SYSTEM. BUG=b:35583330 Change-Id: Ibe626a192d45cf2624368db42d369202a4003123 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19093 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05drivers/spi/tpm: Make SPI TPM driver CAR-safeFurquan Shaikh
1. Use proper CAR semantics for global/static variables. 2. Use spi_* functions directly instead of using a global structure to store pointers to those functions. BUG=b:36873582 Change-Id: I1fc52ab797ef0cbd3793a387d68198efc5dde58c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19114 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05drivers/spi/tpm: using tpm irq to sync tpm transactionJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: Ib64107b17fb6e93dbe626ce92f3bc9da8b84784e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-on: https://chromium-review.googlesource.com/452284 Commit-Ready: Caesar Wang <wxt@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19113 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05drivers/spi/tpm: try to wake cr50 if it is asleepJeffy Chen
BUG=b:35775002 TEST=boot from bob Change-Id: I6324f3c02da55a8527f085ba463cbb1f4fb5dc2e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-on: https://chromium-review.googlesource.com/452283 Commit-Ready: Caesar Wang <wxt@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19112 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05soc/intel/skylake: Add tsc_freq.c to verstageFurquan Shaikh
This is required to provide tsc freq required by timer library. BUG=b:35583330 TEST=Verified that delay(5) in verstage adds a delay of 5 seconds. Change-Id: I03edebe394522516b46125fae1a17e9a06fd5f45 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19094 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-05drivers/spi/tpm: Add tis.c and tpm.c to ramstage and romstageFurquan Shaikh
These files are required to support recovery MRC cache hash save/restore in romtage/ramstage. BUG=b:35583330 Change-Id: Idd0a4ee1c5f8f861caf40d841053b83a9d7aaef8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19092 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-05mainboard/google/reef: increase trackpad data hold timeAaron Durbin
Even though the i2c spec has no minimum data hold time in fast mode the trackpad vendor indicates 300ns is their minimum. However, the topology of the board uses FET isolation to cross voltage domains. Therefore, the default 300ns which should work isn't reflected on the device side of the voltage isolation circuit. Therefore, increase the data hold time to show an observed data hold time of more than 300ns on the device side. BUG=b:36469182 Change-Id: I1b70f2f53c5a29cc7cfd5035a71ca5811b3bcba0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19065 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-05mainboard/google/poppy: Change SD card detect to GPP_E15Furquan Shaikh
SD card detect pin is moved to GPP_E15 in the next build. Update device tree and gpio config accordingly. BUG=b:36012095 Change-Id: Ic0ff72cdcb0f1ca27abc7eb8da9ccd8a21b28522 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19107 Tested-by: build bot (Jenkins) Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com>
2017-04-05soc/intel/common: allow lpss i2c time-based data hold timeAaron Durbin
When using rise_time_ns and fall_time_ns there's currently not a way to specify a target data hold time. The internal 300ns value is used. However, that isn't always sufficient depending on bus topology. Therefore, provide the ability to specify data hold time in ns from devicetree, defaulting to default value if none are specified. BUG=b:36469182 Change-Id: I86de095186ee396099709cc8a97240bd2f9722c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19064 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-05AGESA: Disable CAR with empty stackKyösti Mälkki
Calling disable_cache_as_ram() with valuables in stack is not a stable solution, as per documentation AMD_DISABLE_STACK should destroy stack in cache. Change-Id: I986bb7a88f53f7f7a0b05d4edcd5020f5dbeb4b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18626 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05AGESA: BIST is already preservedKyösti Mälkki
Officialy we enter with BIST in %eax, but %ebp is old backup register. Note that post_code() destroys %al. Change-Id: I77b9a80aac11ae301fdda71c2a20803d7a5fb888 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18625 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05AGESA: Move romstage main entry under cpuKyösti Mälkki
As we now apply asmlinkage attributes to romstage_main() entry, also x86_64 passes parameters on the stack. Change-Id: If9938dbbe9a164c9c1029431499b51ffccb459c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18624 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05AGESA: Move amd_initmmio() callKyösti Mälkki
Function enables PCI MMCONF and XIP cache, it needs to be called before giving platform any chance of calling any PCI access functions. Change-Id: Ic044d4df7b93667fa987c29c810d0bd826af87ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18623 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-04util/intelmetool: Check for NULL return from pci_lookup_nameYouness Alaoui
pci_lookup_name might return NULL from using format_name internally which could cause a crash when trying to print that value. We check for NULL and print a more appropriate value in that case. Change-Id: I499f0b5e1681f3926df0d8a325aab2c666ebd632 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19089 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-04nb/intel/sandybridge/raminit: Add default valuesPatrick Rudolph
Add 100 Mhz reflock default values for Ivybridge. Some values are extracted from MRC, those marked as guessed needs to be verified. Tested on Lenovo T430 (Intel IvyBridge) and DDR3-1800. Change-Id: Ife7f899b5fea02827ad998e9e8ab10ecaef61191 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17609 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-04nb/intel/sandybridge/raminit: Add debugging outputPatrick Rudolph
Add debugging output to normalize_training. Tested on Lenovo T420. Change-Id: I1d787f7ead6cf35ee142a8848837840c91cb6967 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17608 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2017-04-04nb/intel/sandybridge/raminit: Add 100MHz refclock supportPatrick Rudolph
Add support for 100MHz reference clock on ivybridge. Allows to use more frequencies than sandybridge. Tested on Lenovo T430 (Intel IvyBridge) on DDR3-1800. Change-Id: I780d34ded2c1e3737ae1af685c8c2da832842e7c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17607 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-04nb/intel/sandybridge/raminit: Use Ivy Bridge specific valuesPatrick Rudolph
Use Ivy Bridge specific magic values on Ivy Bridge instead of Sandy Bridge values. The values are extracted from MRC.bin. Should increase raminit stability. Tested on Lenovo T430 (Intel IvyBridge). Change-Id: I49fdfe5ae3e65704d22e083e8446e3f1069869bc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17606 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-04abuild: add timeless build command line parameterMartin Roth
Update ABUILD_VERSION for the timeless & checksum parameters. Change-Id: I96b4c027ccf3e5563dbf4598a0d1fb5e83a5985a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19034 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-04util/abuild: Save checksums of build filesMartin Roth
- Add --checksum command line parameter to specify a base path and filename for the checksums to be saved into. - Save checksums of each platform into the specified file appended with "_platform" - Save a sha256 checksum of the sorted config.h into the base file appended with "_config" Change-Id: Id24dc4b10afbd35cdb8750f75b934419e6e80290 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19033 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-04Documentation/core: Update Kconfig documentationMartin Roth
- Remove document history. Since the document is now stored in git, this is no longer needed. - Fix spacing for the kconfig_lint help output - Add license information to the bottom of the document. Change-Id: I9854602a6ad9b4a99bf3988e1d7662b3b426e608 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19075 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-04siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge ICMario Scheithauer
This mainboard uses a LVDS connection for LCD panels. Apollo Lake SoC provides a display controller with three independent pipes (1x eDP and 2x DP/HDMI). PTN3460 is an embedded DisplayPort to LVDS bridge device that enables connectivity between an eDP source and LVDS display panel (http://www.nxp.com/documents/data_sheet/PTN3460.pdf). The bridge contains an On-chip Extended Display Identification Data (EDIT) emulation for EDIT data structures. This patch sets up PTN3460 to be used with the appropriate LCD panel. Change-Id: Ib8fa79bb608f1842f26c1af3d7bf4bb0513fa94d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-04AGESA: Reduce typecasting in heapmanager callsKyösti Mälkki
Change-Id: Ifc065dca00ab3dfc65a314aaaf04dd2a7afcad0e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19040 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-04AGESA: Handle HEAP_CALLOUT_RUNTIME allocation more cleanlyKyösti Mälkki
This was guarded because AGESA.h only defined it starting from fam15 header files. We can simply test if it has been defined. The way coreboot currently handles this request, is to make the allocation outside the heap, since heap may not be in CBMEM and thus not available runtime. The acquired buffer from Allocate() would not be found with Locate() or Deallocate(), so move the alloc_cbmem() call for better code symmetry. Change-Id: Ibf0066913a0b73e768488c3afbeb70139a3961eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19039 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-04AGESA: Adjust heap location for S3 resume pathKyösti Mälkki
Once we do CAR teardown between AmdInitResume() and AmdS3LateRestore() we attempt to find our heap from the temporary memory buffer instead of cache. S3 resume is essentially broken anyways and this is not yet a proper fix at all, but barely keeps system from halting on S3 resume. Offset that seems arbitrary was taken from hudson/agesawrapper.c. Change-Id: Idddf2ecde5a9d32d532071d6ba05032be730460c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19038 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-04AGESA: Refactor S3 support functionsKyösti Mälkki
Producer and consumer of these buffers now appear in same file. Also add test for uninitialized NonVolatileStorage in SPI. Change-Id: Ibbf6581a0bf1d4bffda870fc055721627b538b92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19037 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-04util/docker: Update makefile for servers and local useMartin Roth
- Add some variables to allow server customizations. - Verify that coreboot images and containers exist before trying to remove them. - Add a couple of convenience targets: clean & cleanall to remove coreboot containers and images or ALL containers and images. - Add docker-what-jenkins-does target to run a test build locally inside a docker image. - Add docker-jenkins-server target to test the server configuration and run the jenkins docker image. - Add docker-jenkins-shell and docker-shell targets to run the coreboot-sdk and coreboot-jenkins-server images. - Update the help. Change-Id: I1896f33e7eddfe3248f44ae780de65ce50d5dd99 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/18004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-04util/intelmetool: Fix access to deleted data on stackYouness Alaoui
pci_me_interface_scan was returning (via argument 'name') a pointer to the interface name which was stored in a stack variable. This caused part of the name to be printed as garbage stack data in some situations if stack data was overwritten. This moves the name buffer to the calling function so it can be accessed before it gets overwritten. Change-Id: I947a4c794ee37fe87e035593eaabcaf963b9875e Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19066 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-03AGESA: Simplify parameters for S3 support functionsKyösti Mälkki
This save/restore facility operates on the same datablock. Change-Id: I6e1f176adc2addbf2659c724f94c1b8d46d4838f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19026 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03AGESA: Move guard on S3 support functionsKyösti Mälkki
Only guard the parts that are problematic for romstage. Also intention is to move AMD_S3LATE_RESTORE to ramstage in followup work, it will need OemS3LateRestore. Change-Id: Ie9c1fb3f3f0ab1951771ed829d4acdd8a59d8fbf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19025 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03AGESA: Move EmptyHeap() callKyösti Mälkki
Specification says to do CAR teardown as part of AmdInitPost(). Move initializing the final AGESA heap storage to AmdInitEnv() so the buffer is not invalidated without writeback. Change-Id: I3a5d497d0e25ec291f722e9f089bc8928238c3f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19024 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03cimx/sb800: Log southbridge call-sitesKyösti Mälkki
Logging makes it easier to track order of events as these call-sites are scattered on various files. Change-Id: I428547051fd8bf487e91415dc72ee03dba13029e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18718 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03bap/ode_e20XX: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I79d4a4d1d5966ab46c8a9b9e9ca4e09e21ecfea7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18717 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03drivers/i2c/tpm: remove 1260 byte buffer from stackAaron Durbin
The tis.c module is needlessly copying data to/from a 1260 byte buffer on the stack. Each device's transport implementation (cr50.c or tpm.c) maintains its own buffer, if needed, for framing purposes. Therefore, remove the duplicated buffer. BUG=b:36598499 Change-Id: I478fb57cb65509b5d74bdd871f1a231f8080bc2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19061 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/i2c/tpm: remove unused variable in tpm_transmit()Aaron Durbin
The 'ordinal' variable is not used. Remove it. BUG=b:36598499 Change-Id: I015a6633c0951980658b3c879e48bc84d604d62e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19060 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-03drivers/i2c/tpm: remove unused types from tpm.hAaron Durbin
There are unused structures/types in the tpm.h header file. Remove them. BUG=b:36598499 Change-Id: Iddc147640dcec70e80791846eb46298de1070672 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19059 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/spi/tpm: honor tis_sendrecv() APIAaron Durbin
The spi tis_sendrecv() implementation was always returning success for all transactions. Correct this by returning -1 on error when tpm2_process_command() returns 0 since that's its current failure return code. BUG=b:36598499 Change-Id: I8bfb5a09198ae4c293330e770271773a185d5061 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19058 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/spi/tpm: make tpm_info object local to compilation unitAaron Durbin
The tpm_info object is a global, but its symbol does not need to be exposed to the world as its only used within tpm.c. BUG=b:36598499 Change-Id: Idded3dad8d0d1c3535bddfb359009210d3439703 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19057 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/spi/tpm: de-assert chip select on transaction errorAaron Durbin
In the case of start_transaction() failing the chip select is never deasserted. Correct that by deasserting the chip select when start_transaction() fails. BUG=b:36598499 Change-Id: I2c5200085eb357259edab39c1a0fa7b1d81ba7b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19056 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-03nb/intel: Deduplicate vbt headerPatrick Rudolph
Move header and delete duplicates. Change-Id: I0e1f5d9082626062f95afe718f6ec62a68f0d828 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18903 Tested-by: build bot (Jenkins) Tested-by: coreboot org <coreboot.org@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-03arch/x86/acpigen: Allow writing buffers larger than 256 bytesRizwan Qureshi
Currently only 256 bytes can be written at a time using the acpigen_write_return_byte_buffer or acpigen_write_byte_buffer API's and there can be cases where the buffer size can exceed this, hence increase the number of bytes that can be written. Change-Id: Ifaf508ae1d5c0eb2629ca112224bfeae1c644e58 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/18966 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-03Makefile.inc: Fix jenkins build of nvramcui & coreinfoMartin Roth
With COREBOOT_BUILD_DIR set, nvramcui & coreinfo were getting built in the wrong location, causing those builds to fail. Also, because they were built in the wrong location, the build failures were not detected by jenkins which was looking for the junit.xml files under the payloads directory. Change-Id: I9d81ebabebe5d8b5f79ae63f8a5f388430e06754 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19069 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-31drivers/intel/gma: Guard GFX_GMA_* configsNico Huber
It's confusing to have these Kconfig symbols for non-Intel boards. Change-Id: I4903c816258e5d2b8ed8704295b777aee175e8bc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18795 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-29soc/intel/apollolake: Fix debug build booting issueSubrata Banik
This patch fix apollolake devices unable to boot with coreboot debug image issue. Change-Id: I28943100ba19dec1e540fdbba1c1e110c6af1488 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19036 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-29cbfstool/ifwitool: Remove unnecessary assignmentPaul Menzel
Fix the warning below. ``` util/cbfstool/ifwitool.c:551:2: warning: Value stored to 'offset' is never read offset = read_member(data, offset, sizeof(h->fit_tool_version), ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ``` Found-by: scan-build from clang 3.8.1 Change-Id: I6c322a335a371a20561b32e04e7dcc7310dab607 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18667 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-29src/lib/jpeg: Fix missing closing braceYouness Alaoui
There's a missing closing brace in fillbits function of jpeg.c which caused an avalanche of compilation errors. This was introduced in commit 491c5b60 (src/lib: Move assignment out of if condition) which was reviewed in gerrit at https://review.coreboot.org/18761 and it prevents coreboot from building when CONFIG_BOOTSPLASH is set. Change-Id: Ie10b774875fc25ce2ff613c542c15870e780a761 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19032 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-29amd/olivehill: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I074dc7d5edbe3444f841e67a5644938e23118942 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-29asrock/imb-a180: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I00bd4d895b2585235bf5b3edd23fbcddba69d31e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18714 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-29siemens/mc_apl1: Adjust gpio settingsMario Scheithauer
Adjust gpio settings according to the hardware layout. Change-Id: I2f440e863c2e6f59298c500ac5aefa3b7386bcdf Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/18995 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-03-29mainboard/google/reef: turn off DMIC_CLK_B1 in S0ixSathyanarayana Nujella
Wake On Voice stream capture configuration is mono. It is sufficient to keep DMIC_CLK_A1 on in S0ix; so, turning off DMIC_CLK_B1. Power saving should be visible in the boards which has more than one DMIC connected. BUG=None BRANCH=None TEST=WoV and quad channel DMIC capture works Change-Id: Ic46d4c7b30b945eba47a05d78386f48e4a675a03 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/19018 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Tested-by: build bot (Jenkins)
2017-03-29util/futility/Makefile: Update clean targetMartin Roth
- Fix clean target to pass if output doesn't exist - Make sure $(RM) is actually defined Change-Id: Ibcdb0e329084f58b27c3f53213a237d02c922a51 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/18998 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-283rdparty/blobs: Update for AMD Stoney RidgeMarshall Dawson
Add the binaryPI file for the FT4 package and add SMU firmware to be consumed by fanless OPNs. Change-Id: I1c9b5ded6b494fac1553cc2ec7756a7a47386ecf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18988 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/pi/hudson: Add fanless SMU firmware to buildMarshall Dawson
Use the new parameters in amdfwtool to include the additional SMU firmware into amdfw.rom. Change-Id: Ib44860780c8d5fb00c47f775a2a83b82ff3e1821 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19002 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/pi/hudson: Reduce amdfw space requirementMarshall Dawson
Change the current implementation so that multiple PSP directory structures are not included, saving 448 KB. AMD created a mechanism so that multiple generations of APUs, in identical packages, may be supportable in one BIOS image. The PSP identifies the correct directory table by checking one of two pointers in the Embedded Firmware structure. Coreboot doesn't implement this capability, however it has been constructing amdfw.rom with two identical directory tables and two copies of each PSP blob. Tested on Bettong (Merlin Falcon / Carrizo) and Jadeite (Stoney). Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 11dfc3f621344db66d92b61d72927128ea48685f) Change-Id: I139f3bfdb319af803fef64e7bd848e95945f41aa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/pi/hudson: Add alternate method for including amdfwMarshall Dawson
For systems using Chrome OS, place the amdfw outside of cbfs control. The firmware must go to a fixed position at an offset of 0x20000 into the flash device. Potentially improve by adding a warning or error message for the condition when sizeof(amdfw) + sizeof(cbfs and metadata) > sizeof(flash). Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 2d9d631b39d7850576438a5b0979936bd33893e1) Change-Id: I38029bc03e5db260424cca293b1a7bceea4d0d75 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18435 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28util/amdfwtool: Add fanless SMU firmware optionsMarshall Dawson
The Stoney Ridge program has OPNs that are considered fanless. These APUs are strapped to search for unique SMU firmware, indicated by Type[8]=1 in the directory table entry. Add new options to amdfwtool and include the blobs in the build with the appropriate bit set in the Type encoding. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 8df0d6847c39bb021271983018ac6f448f9ff9da) Change-Id: I4b80ccf8fd9644f9a9d300e6c67aed9834a2c7a7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18991 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28Remove libverstage as separate library and source file classJulius Werner
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are linked directly into the bootblock or the romstage. However, they're still compiled with a separate "libverstage" source file class, linked into an intermediate library and then linked into the final destination stage. There is no obvious benefit to doing it this way and it's unclear why it was chosen in the first place... there are, however, obvious disadvantages: it can result in code that is used by both libverstage and the host stage to occur twice in the output binary. It also means that libverstage files have their separate compiler flags that are not necessarily aligned with the host stage, which can lead to weird effects like <rules.h> macros not being set the way you would expect. In fact, VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86 because their libverstage code that gets compiled into the romstage sets ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to run pre-migration. This patch resolves these problems by removing the separate library. There is no more difference between the 'verstage' and 'libverstage' classes, and the source files added to them are just treated the same way a bootblock or romstage source files in configurations where the verstage is linked into either of these respective stages (allowing for the normal object code deduplication and causing those files to be compiled with the same flags as the host stage's files). Tested this whole series by booting a Kevin, an Elm (both with and without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode. Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18302 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>