summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-13soc/intel/cmd/block: Implement an API to get firmware partition detailsDinesh Gehlot
This patch retrieves details of a specified firmware partition table. The information retrieved includes the current firmware version and other information about the firmware partition. The patch communicates with the ME using the HECI command to acquire this information. BUG=b:273661726 Test=Verified the changes for ISH partition on nissa board. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I0582010bbb836bd4734f843a8c74dee49d203fd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-04-13mb/google/myst: Disable keyboard reset pinJon Murphy
The keyboard reset is not being used on this board, so disable the functionality. BUG=b:277294460 TEST=None Change-Id: If7fb9ab0c9b1260d342313badb65c55bb9f788c0 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74285 Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13mb/google/brya/acpi: Add support for GPS_REQUESTDXSTATETarun Tuli
Implement the GPS_REQUESTDXSTATE function which forces the current D notifier state to re-report. TEST=verified that notifications are forced out when invoked using acpiexec BUG=b:271938907 Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I6dab9b793fe1d0b1c875eddbe6ae324d2894efe6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/brya/acpi: Add support for forcing notifications in DNOT funcTarun Tuli
Currently the DNOT function first checks to see if the current DNOT value has already been reported. Add support to allow forcing regardless if it had been sent already. TEST=confirmed that when enabled, all events notify. When disabled, only events on value change are notified. BUG=b:271938907 Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I7a93cca6a8f922574dd46b46572b230755db9aa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/brya/acpi: Pass GPS_FUNC_SUPPORT as 8 byte bufferTarun Tuli
Currently the value was being truncated to 4 bytes. Change so that the full 8 byte value is passed. TEST=verified function returns expected value using acpiexec BUG=b:271938907 Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Icfc775de680e328a2b240595223d7098fee3dc3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/brya/acpi: LTOB - Add support for a 8 byte integer to bufferTarun Tuli
This function adds support to convert a integer into a 8 byte buffer TEST=verified returned buffer is as expected using acpiexec BUG=b:271938907 Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I89eb50f1452657c26b97eb5609ed956fa8ee8117 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/brya/acpi: Correct _DSM GPS function for revision checkTarun Tuli
The logic was not equals, rather than the intended greater than or equal to for checking the minimum GPS revision. TEST=version check passes as expected now BUG=b:271938907 Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I66bf1fc32295e1b9e9c41c661ea8e395a1592a86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13soc/intel/meteorlake: Hook up UPD CnviWifiCoreKapil Porwal
Hook the newly created/exposed CnviWifiCore UPD up as a chip driver. Enable this option by default to maintain the existing behavior. BUG=b:270985197 TEST=Verified by enabling/disabling the UPD on google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I5b4662c2a064f7c9074797c8a2541dcf1dd686fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/74306 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13soc/intel/common: Update cpu_apic_info_type structSridhar Siricilla
The patch updates total cpu count variable and total P-core count in cpu_apic_info_type structure to `unsigned short int` to address more cores. TEST=Verify the build on Rex Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I46239cc7ad9870e7134955af56b9f6625be2b002 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-13mb/google/dedede: Create taranza variantDavid Wu
Create the taranza variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:277664211 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_TARANZA Change-Id: Id64e48ff2acd6e827fe586a00376183930ddc7e1 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74295 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13mb/lenovo/x200/blc: Add LTN121AT07-L02 at 750HzBill XIE
Its EDID string is "LTN121AT07L02". The vendor sets BLC_PWM_CTL to 0x31313131. This frequency seems working well on the x200 with this panel, which is said to be LED. Change-Id: I8b0ec04c6f6fcb6d4027a5114698db87d7718191 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74182 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-13cpu/x86/mp_init.c: Set topology on BSPArthur Heymans
The BSP might have non-zero lapicid so set the topology accordingly, without assuming it is 0. This fixes a cpu exception on at least Intel Meteorlake. This was caused by FSP CPU PPI being giving incorrect information about the BSP topology. This problem was introduced by 8b8400a "drivers/fsp2_0/mp_service_ppi: Use struct device to fill in buffer" which sets the PPI struct based on struct device. TESTED on google/rex Change-Id: I3fae5efa86d8efc474c129b48bdfa1d1e2306acf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74374 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13payloads/external/Makefile.inc: Make linuxboot a phony targetArthur Heymans
To quote the gnu make manual: "A phony target is one that is not really the name of a file; rather it is just a name for a recipe to be executed when you make an explicit request. There are two reasons to use a phony target: to avoid a conflict with a file of the same name, and to improve performance." Change-Id: I337f4f2e0257a75ba204d21f8aa84292e8233082 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74309 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marvin Drees <marvin.drees@9elements.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13soc/intel/xeon_sp: Fix very small total memory when CXL is enabledJohnny Lin
Processor attached memory should not use reserved_ram_from_to and treat the calculation of gi_mem_size size as 64MB. By default SOC_INTEL_HAS_CXL is enabled for Sapphire Rapids platforms, this should fix small total memory issue. Before the fix running command 'free -g -h' under Linux shows the total memory is only 1.4Gi, after the fix it's showing the expected total memory size 15Gi. Tested=On AC without attaching CXL memory, the total memory size is the same as de-selecting SOC_INTEL_HAS_CXL. On OCP Crater Lake with CXL memory attached, CXL memory can be recognized in NUMA node 1: numactl -H available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 .. 59 node 0 size: 95854 MB node 0 free: 93860 MB node 1 cpus: node 1 size: 63488 MB node 1 free: 63488 MB node distances: node 0 1 0: 10 14 1: 14 10 Change-Id: I38e9d138fd284620ac616a65f444e943f1774869 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74296 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-13mb/google/nissa/var/yaviks: Update GPIOs to support yavillaShon Wang
Yavilla is a variant of yaviks which is almost identical to yaviks, so is reusing the yaviks coreboot variant. so update the GPIO tables to handle these based on fw_config. BUG=b:277148122 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I831b199055c931e7a4a393eeb9e75e83c8ae3c3a Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74264 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13mb/google/nissa/var/yaviks: Select VBT based on FW_CONFIG for yavillaTony Huang
Select hdmi vbt bin files based on MB_HDMI field of FW_CONFIG. BUG=b:277148122, b:276369170 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I210003c27c83155dd5a768c1a6cdcfd8c849d256 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74262 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13mb/google/nissa/var/yaviks: Update devicetree based on FW_CONFIG for yavillaTony Huang
Yavilla will leverage yaviks FW build. It has one additional USB Type-A0 port, support stylus and support WWAN. Here update devicetree based on FW_CONFIG for yavilla's design. -Enable USB2 port3 and USB3 port1 for USB2/3 Type-A0 -Enable USB2 port5 and USB3 port3 for WWAN -Enable pen garage -Enable rear mipi cam -Enable Synaptics touchpad BUG=b:277148122, b:276369170 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I38dbcf5920d12adb1f84885bdfa4c2f2faf2eb9e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-13soc/amd/stoneyridge/northbridge: use common acpi_fill_root_complex_tomFelix Held
Use the common acpi_fill_root_complex_tom function instead of the SoC- level northbridge_fill_ssdt_generator function that does basically the same. TEST=Resulting coreboot SSDT remains unchanged on Careena. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie0f100e0766ce0f826daceba7dbec1fb88492938 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-04-13mb/google/myst: Add initial I2C configurationJon Murphy
Add I2C peripheral reset configuration required during early init. Enabled I2C generic and HID drivers. BUG=b:275939564 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I44668295fb6ed03992df9d9fc075792e181d1a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/74108 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-13mb/google/myst: Enable elogJon Murphy
Enable ELOG for Myst. BUG=b:275938975 TEST=builds Change-Id: I214e2dbaa3bc40c3f4ca68c8ee4b1398446d7090 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74282 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/myst: Add ACPI configuration for USB portsJon Murphy
The USB port configuration was derived from the PPR and schematics. Primary functions are: 2 USB-C ports 1 USB SS+ type A port 2 Cameras (World/User facing) 1 Bluetooth transceiver 1 WWAN BUG=b:275905635 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Iecb256cad7b2daea1fddfc8323e88ff5c38d1e51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/myst: Enable XHCI controllersJon Murphy
Enable the XHCI controllers in the devicetree for myst project. BUG=b:275905635 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I05dc5bb157f0ef955e4b37e34d7b32678e42ebc8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13mb/google/myst: Enable internal graphicsJon Murphy
Enable internal graphics on the phoenix soc for myst projects. BUG=b:275900162 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ia6ef1ca07b9af491c7d937be5cef4f051852e486 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74104 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-13MAINTAINERS: Update maintainers for MediaTek SoCs and mainboardsYidi Lin
- Add Google MediaTek mainboards - Update maintainers for MediaTek SoCs and mainboards Change-Id: Ic3e99b08fe9eb153263470bc6c7a97524e1bf888 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-13cbfstool: Add comment to define stability rules for cbfstool print -kJulius Werner
In CB:41119, I sort of made up a mechanism on the fly for how to make the machine-parseable cbfstool print output extensible without breaking backwards compatibility for older scripts. But I only explained it in the commit message which is not very visible. This patch adds a comment to the function that generates that output so that people who want to change it can understand the intent. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0d18d59e7fe407eb34710d6a583cfae667723eb7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-12mb/amd/birman/port_descriptors_*: use DDI_DP_W_TYPEC type for DDI 2..4Felix Held
DDI 2..4 are the display outputs multiplexed onto the 3 USB type C ports as DisplayPort alternate function, so use the DDI_DP_W_TYPEC connector type for those. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I659d62bfb426e3e47214203490c34e9c200beee2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74299 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12mainboard/google/skyrim: Fix MP2 FW namingMarshall Dawson
Update the blob type for TypeId0x25_Mp2Fw_MDN_AD03.sbin to subprogram 0. Delete the extra MP2FW line. BUG=b:246770914 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I5418b1ed59e1916b971d2eece9f6a2fd0e51b1b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-12Revert "device: Add Kconfig options for D3COLD_SUPPORT and NO_S0IX_SUPPORT"Michael Niewöhner
This reverts commit 655f7362e13ca49e3e13a822c916c7dc52573d74. Reason for revert: Apparently, the change was not properly reviewed. It not only contains conflicting name and description of the D3COLD Kconfig, but also creates a conflict between existing devicetree and Kconfig options for D3Cold/S3/S0ix. Change-Id: I56ce8f59f8548fc58bc2b3b07c1314e2eed7061c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-12Revert "soc/intel/rtd3: Hook up supported states to Kconfig"Michael Niewöhner
This reverts commit dbb97c3243e55a0fd00e692d150c9d38d09b57af. Reason for revert: dependency for revert CB:73903 Change-Id: Ibc81483239a13f456d20631725641b7219af4ef8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-12Revert "soc/intel/{tgl,adl}: Hook up D3ColdEnable UPD to D3COLD_SUPPORT"Michael Niewöhner
This reverts commit 6bfca1b689e48be4f72e8fa401f3558d845fc282. Reason for revert: dependency for revert CB:73903 Change-Id: I56bab4d85d04e90cacfe77db59d0cde6a8a75949 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-12Revert "soc/intel/{tgl,adl}: Replace _S3 with D3COLD_SUPPORT symbol"Michael Niewöhner
This reverts commit fd4ad29f1824ad5d8df67f3e30d3908d24cbd8a4. Reason for revert: dependency for revert CB:73903 Change-Id: I5ed5e3e267032d62d65aef7fb246a075dccc9cf6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-12soc/intel/xeon_sp: Drop Kconfig MAX_SOCKET_UPDPatrick Rudolph
The Kconfig is only used in common code to gather the build time maximum socket number FSP support. The same information is available in FSP header as MAX_SOCKET, thus use the FSP as truth of source. Currently MAX_SOCKET is 4. Change-Id: I10282c79dbf5d612c37b7e45b900af105bb83c36 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74339 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-12mb/google/myst: Enable iommuJon Murphy
Enable iommu in devicetree for myst in order to allow kernel to load and initialize IOMMU. Bug=b:276805280 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I94e93afe775b070253464a9d187ad6c028d1b811 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-12mb/google/myst: Enable console UARTJon Murphy
Enable the console UART for myst devices. Bug=b:275900837 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I52c1b86c46907216d88f98917968b833af0d5d41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74103 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-12mb/google/myst: Add FW_CONFIGJon Murphy
Add initial FW_CONFIG for the myst program. BUG=b: TEST=builds Cq-Depend: chrome-internal:5674351 Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: If74c3649d4e8d174d9fe00a4b896c2351ee3ab19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-12mb/google/myst: Enable eSPI SCI eventsJon Murphy
Enable EC SCI events for eSPI. BUG=b:275894894 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I8fd858c484f6fcf952bcb4f756ba2e4728091d8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74101 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-12mb/google/nissa/var/yaviks: Generate SPD ID for new memory partsTony Huang
Add supported memory parts in mem_parts_used list, and generate SPD ID for these parts. These new memory are added for yavilla. DRAM Part Name ID to assigna H58G66BK7BX067 4 (0100) MT62F2G32D4DS-026 WT:B 4 (0100) K3KL9L90CM-MGCT 4 (0100) H58G66AK6BX070 5 (0101) BUG=b:277148122 BRANCH=firmware-nissa-15217.B TEST=run part_id_gen to generate SPD id Change-Id: I3c48b9763f54e2e69f7c2d494fefbabedab2a389 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-12Reland "drivers/intel/dptf: Add multiple fan support under dptf"Sumeet Pawnikar
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e. Add multiple fan support for dptf policies. This also fixes the Google Meet resolution drop issue as per b:246535768 comment#12. When system starts Google Meet video call, it uses the hardware accelerated encoder as expected. But, as soon as another system connects to the call, an immediate fallback is observed from hardware to software encoder. Due to this, Google Meet resolution dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC based fanless platforms. This same issue was not seen on fan based systems. With the fix in dptf driver where fan configures appropriate setting for only fan participant, not for other device participants, able to see consistent 720p resolution. BUG=b:246535768,b:235254828 BRANCH=None TEST=Built and tested on Alder Lake-P Redrix system for two fans support and on Alder Lake-N fanless systems. With this code change Google Meet resolution drop not observed. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12mb/google/rex: remove weak from cros gpioEric Lai
No need for variant to use _weak. BUG=b:276818954 TEST=new_variant_fulltest.sh rex0 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I7ad904e06e5d83edf4bc11cafd5060ca409bd4ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/74294 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-04-12mb/google/nissa/uldren: Configure the external V1p05/Vnn/VnnSxDtrain Hsu
This patch configures external V1p05/Vnn/VnnSx rails for Uldren to follow best practices for power savings – untested though. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 , S0 states. * Set the supported voltage states. * Set the voltage for v1p05 and vnn. * Set the ICC max for v1p05 and vnn. BUG=b:272829190 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I3ff8e7db33bfbe4048327825406462262e8d2919 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74335 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12mb/google/skyrim: Remove mainboard LIDS ACPI objectKarthikeyan Ramasubramanian
With EC's lid switch implementation, there is no need to maintain the lid switch state in mainboard. Hence remove LIDS ACPI object from mainboard. BUG=None TEST=Build Skyrim BIOS image and boot to OS. Read the lid switch state correctly through /proc/acpi/button/lid/LID0/state. Change-Id: I0f8dc7216337268c421a475f54ee5b28abf33d08 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-12ec/google/chromeec: Use either EC or MB lid switch stateKarthikeyan Ramasubramanian
With CB:16732, EC can provide default lid switch implementation(LID0 ACPI device). Up until that point, mainboard has been providing default switch implementation. When EC provides lid switch implementation, the lid switch state is read from EC either through MMAP or LPC interface. Hence there is no need to keep mainboard's LIDS ACPI object in sync with EC's lid switch state. Use only EC's lid switch state on boards using EC's implementation. This paves the way to remove LIDS ACPI object on those mainboards. BUG=None TEST=Build Skyrim BIOS image and boot to OS. Trigger lid open/close events and ensure that they are detected properly through /proc/acpi/button/lid/LID0/state. localhost ~ # cat /proc/acpi/button/lid/LID0/state state: open localhost ~ # cat /proc/acpi/button/lid/LID0/state state: closed Ensure that the system behaves as expected based on powerd configuration. After signin, system suspends/resumes for lid close/open. On signin screen, system shuts down/boots for lid close/open. Change-Id: I013574d7c21761f167ad38aeed27a419677b8000 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-12mb/starlabs/starbook/adl: Enable OverCurrent 3 GPIOSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9971209539aa7b74e55673141902b6ad0d698e4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73985 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12mb/starlabs/starbook/adl: Fix OC pin configSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1c4bdab44f0d73546f52614917dccbe71f0911a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73984 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12mb/intel: Add 2 SPR sockets CRB Archer CityJonathan Zhang
Intel Archer City CRB is a dual socket CRB with Intel Sapphire Rapids Scalable Processor chipset. The chipset also includes Emmitsburg PCH. It was tested with LinuxBoot payload on both dual and single socket configurations. The multisocket support depends on Change-Id: I4a593252bb7f68494f4ccce215ac9cf1eb19b190 Change-Id: Ic02634cd615e2245e394f10aad24b0430cf5cd17 Signed-off-by: Jonathan Zhang <jonzhang@meta.com> Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71968 Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-11mb/google/myst: Add smihandlerJon Murphy
Add SMI handler code for Myst platform. BUG=b:275858191 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I92e5e6aef7ab0b84a96d976e29ebf96b56f6f1a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74100 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-11mb/google/myst: Enable chromeOS ECJon Murphy
BUG=b:270624655 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Id18a311097d575973087eb92fd446a5c511f570e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-11mb/google/myst: Enable variants for MystJon Murphy
BUG=b:270618107 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I688e9c2fdf203cecfd5f200dec6cde9dbc0a9aa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-11ACPI: Add helper for MADT LAPICsKyösti Mälkki
This avoids some code duplication related to X2APIC mode. Change-Id: I592c69e0f52687924fe41189b082c86913999136 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2023-04-11ACPI: Add helper for MADT LAPIC NMIsKyösti Mälkki
This avoids some code duplication related to X2APIC mode. Change-Id: I2cb8676efc1aba1b154fd04c49e53b2530239b4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2023-04-11binaryPI: Use common code for LAPIC NMIsKyösti Mälkki
Change-Id: I1a39f355733d10ecd43a1da541ab2e66ba13db15 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2023-04-11soc/intel/alderlake/{chipset.cb,chipset_pch_s.cb}: Set P2SB as hiddenMichał Żygowski
Set the P2SB device as hidden as FSP-S is hiding the PCI configuration space from coreboot on Alder Lake systems. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5cfde7c1f6791578a03d73e89bcde31af608f12d Reviewed-on: https://review.coreboot.org/c/coreboot/+/69950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-11soc/intel/alderlake: Hook up P2SB PCI opsMichał Żygowski
P2SB device is being hidden from coreboot by FSP-S. This breaks the resource allocator which does not report P2SB BAR via intel common block P2SB driver. Hook up the common block P2SB driver ops to soc_enable function so that the resources will be reported. The P2SB device must be set as hidden in the devicetree. This fixes the silent resource allocation conflicts on machines with devices having big BARs which accidentally overlapped P2SB BAR. TEST=Boot MSI PRO Z690-A with multiple PCIe devices/dGPUs with big BARs and see resource conflicts no longer occur. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I7c59441268676a8aab075abbc036e651b9426057 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-11mb/google/rex: Add DTT thermal settings for thermal controlSumeet Pawnikar
Add DTT thermal settings for thermal control provided by thermal team for rex0 board BRANCH=None BUG=b:262498724, b:270664854 TEST=Built and verified thermal entries in ACPI SSDT on Rex board Change-Id: I00dd97b759c8c68edaeeb4d64422b83c5e86981d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-11soc/amd/mendocino: Lower log level for TDP value to DEBUGPaul Menzel
Printing the value of a variable is not informative for a normal user, so decrease the value from BIOS_INFO to BIOS_DEBUG. Fixes: b9caac74a320 ("soc/amd/mendocino: Reinterpret smu_power_and_thm_limit") Change-Id: I22f6293fd47633dfdbdae37b7257f47a5a4bb29c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-04-11soc/intel/xeon_sp/acpi: Fix _OSC methodPatrick Rudolph
Fix a couple of bugs in the _OSC method for handling "PCI Host Bridge Device" on Xeon-SP. - Drop the Sleep. The code doesn't write to hardware at all, so there's no need to sleep here. - Make sure that the number of DWORD passed in Arg2 is at least 3. The existing check was useless as it would not create the DWordField, but then use it anyways. - Add check for CXL 2 device method calls which provide a 5 DWORD long buffer to prevent buffer overflows when invoking the "PCI Host Bridge Device" method. Test: Boot on Archer City and confirm that no ACPI errors are reported for _OSC. Change-Id: Ide598e386c30ced24e4f96c37f2b4a609ac33441 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
2023-04-11soc/intel/alderlake/iomap: Fix the PCR BAR size on ADL-SMichał Żygowski
According to ADL PCH BIOS specification (DOC# 630603) ADL-S PCH uses a fixed SBREG_BAR of 256MiB starting at 0xe0000000. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ied59a6dad8fb065dc3aeb6281bd32074aaa5e3b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-11mb/siemens/mc_ehl2: Fix GPIO settings for latest HW revisionMario Scheithauer
With the latest hardware revision, the two GPIOs GPD11 and GPP_C8 are no longer used. BUG=none TEST=Checked output verbose GPIO debug messages Change-Id: Ia06f93aee4eccb0e4230f0c3ef53922d42701f21 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74201 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-11util/sconfig: Remove unused ioapic and irq keywordsArthur Heymans
Ioapic information in the devicetree was only used to set up mptables but this generic driver was removed (ca5a793 drivers/generic/ioapic: Drop poor implementation). This removes the unused remainders from mainboard devicetrees. Remove ioapic setup from sconfig. Change-Id: Ib3fef0bf923ab3f02f3aeed2e55cf662a3dc3a1b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-11drivers/fsp2_0/mp_service_ppi: Use struct device to fill in bufferArthur Heymans
Now the CPU topology is filled in struct device during mp_init. Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-11mb/google/skyrim: Enable UPD usb3_port_force_gen1 for MarkarthJohn Su
From request, all type C port limit to to Gen1 5GHz. So enable UPD usb3_port_force_gen1 for Markarth. BUG=b:273841155 BRANCH=skyrim TEST=Build, verify the setting will be applied on Markarth. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I9314b67a82ad2993c87f0110db5ec927caaa772b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74087 Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chao Gui <chaogui@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-11mb/google/brya/variants/hades: Update GPU power sequencing to add Hades supportTarun Tuli
Add GPU power sequencing changes for the Hades baseboard and variant. Some signals were added, moved or inverted. Based on implementation from Agah. Moved signals: GPIO_1V8_PWR_EN GPP_E11 GPIO_NV33_PWR_EN GPP_E2 GPIO_NV33_PG GPP_E1 New signals: GPIO_NV12_PWR_EN GPP_D0 GPIO_NV12_PG GPP_D1 Inverted signals: GPIO_FBVDD_PWR_EN GPP_A19 ifdef's will be dropped once the Agah variant is retired. BUG=b:269371363 TEST=builds and verified on Agah that DGPU is still detectable (lspci) Change-Id: I0b8efe7a34102cf61d4f784103c4a4f9337213f7 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-04-11mb/lenovo/x200: Read EDID in mainboard_vbt_filename()Bill XIE
mainboard_vbt_filename() used to assume that it is called after a call to get_blc_pwm_freq_value() with a valid parameter, but currently it is the first call of get_blc_pwm_freq_value(NULL), and will return 0, so "data_led.vbt" is always returned, regardless of the actual type of the panel. Combined with the previous commit, in this commit mainboard_vbt_filename() will explicitly read EDID string via gm45_get_lvds_edid_str() and use this string to call get_blc_pwm_freq_value(). Resolves: https://ticket.coreboot.org/issues/475 Tested on my x200s with LTD121EQ3B (LED), and x200 with LTD121EWVB (CCFL). Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I2e080b29321b6989d1f26b6c67876b3d703042f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74181 Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-11mb/intel/mtlrvp: Update Debug Flash Layout to fit WP_RO within 4MBSubrata Banik
This patch updates the MTLRVP debug flash layout to optimize WP_RO to 4MB. Changes for chromeos.fmd: SI_BIOS: RW_SECTION_A/B: Increase to 7.5MB. RW_LEGACY: Introduce with 1MB. RW_MISC: Increased to 1MB. RW_UNUSED: 2MB (reserved) WP_RO: Reduce to 4MB Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the SPI Flash. BUG=b:277143384 TEST=Able to build and boot intel/mtlrvp with FSP release and debug image. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie635e3cce1c3fd771e6a17e4b3c1bd700f4729bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/74254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-11mb/google/rex: Update Debug Flash Layout to fit WP_RO within 4MBSubrata Banik
This patch updates the Rex debug flash layout to optimize WP_RO to 4MB. Changes for chromeos.fmd: SI_BIOS: RW_SECTION_A/B: Increase to 7.5MB. RW_LEGACY: Introduce with 1MB. RW_MISC: Increased to 1MB. RW_UNUSED: 2MB (reserved) WP_RO: Reduce to 4MB Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the SPI Flash. BUG=b:277143384 TEST=Able to build and boot google/rex with FSP release and debug image. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4ab69eb24937d58c8bc5d3c0a6e5cb70b843a1ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/74253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-11mb/intel/mtlrvp: Update Flash Layout to fit WP_RO within 4MBSubrata Banik
This patch updates the MTLRVP flash layout to optimize WP_RO to 4MB. Changes for chromeos.fmd: SI_BIOS: RW_SECTION_A/B: Reduce to 7MB. RW_LEGACY: Reduce to 1MB. RW_MISC: Increased to 1MB. RW_UNUSED: 3MB (reserved) WP_RO: Reduce to 4MB Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the SPI Flash. BUG=b:277143384 TEST=Able to build and boot intel/mtlrvp with FSP release and debug image. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibd1ea7a3a2cd21928b8e33473c7bdddfad17c636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-11mb/google/rex: Update Flash Layout to fit WP_RO within 4MBSubrata Banik
This patch updates the Rex flash layout to optimize WP_RO to 4MB. The idea is to create more space inside FW_RW_A/B to accommodate multiple blobs to boot google/rex with different Intel MTL SoC stepping. Changes for chromeos.fmd: SI_BIOS: RW_SECTION_A/B: Reduce to 7MB. RW_LEGACY: Reduce to 1MB. RW_MISC: Increased to 1MB. RW_UNUSED: 3MB (reserved) WP_RO: Reduce to 4MB Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the SPI Flash. BUG=b:277143384 TEST=Able to build and boot google/rex with FSP release and debug image. Change-Id: Iccf83b7bb66d0d5503e0ff9e9a819051296c6724 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74229 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-11soc/intel/{adl, cmn}: Send CSE EOP Async CMD earlySubrata Banik
This patch sends the CSE EOP command asynchronous implementation early as part of `soc_init_pre_device`. Without this patch the duration between asynchronous CSE EOP send and receive commands is not ample whichcauses idle delay while waiting for EOP response. The goal of the CSE async implementation is to avoid idle delay while capturing the response from CSE EOP cmd. This patch helps to create ample duration between CSE EOP command being sent and response being captured. TEST=Able to boot google/marasov EVT sku to ChromeOS and observed ~30ms of boot time savings (across warm and cold reset scenarios). Without this patch: 963:returning from FspMultiPhaseSiInit 907,326 (97,293) ... ... 115:finished elog init 967,343 (2,581) 942:before sending EOP to ME              967,821 (478) …  16:finished LZMA decompress (ignore for x86)    1,017,937 (12,135) 943:after sending EOP to ME                     1,067,799 (49,861) … … 1101:jumping to kernel                          1,144,587 (13,734) Total Time: 1,144,549 With this patch: 963:returning from FspMultiPhaseSiInit 918,291 (97,320) 942:before sending EOP to ME                    918,522 (230)   ... ... 16:finished LZMA decompress (ignore for x86) 1,029,476 (12,483)   943:after sending EOP to ME                     1,033,456 (3,980)   ... ...   1101:jumping to kernel                          1,111,410 (14,007) Total Time: 1,111,375 Change-Id: Idaf45ef28747bebc02347f0faa77cc858a4a8ef1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-11mb/intel/mtlrvp: Enable PCIe port 6 and RTD3 support for x1 slotCliff Huang
This change enables PCIe x1 slot. In addition, it turns off 3.3v and 12v power and assert PERST# when suspend and turn on the power and deassert the PERST# when resume for the x1 slot. NOTE: Kconfig flag and required GPIO pins are already configured. - /soc/intel/meteorlake/Kconfig select SOC_INTEL_COMMON_BLOCK_PCIE_RTD3 - gpio.c: /* GPP_A18: X1_PCIE_SLOT3_PWR_EN */ PAD_CFG_GPO(GPP_A18, 1, DEEP), /* GPP_A19: X1_DT_PCIE_RST_N */ /* SRCCLKREQ: GPP_C12: SRCCLKREQ3_GEN4_X1_DT_SLOT3_N */ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), BUG=b:224325352 BRANCH=None TEST=Insert a SD card or NIC AIC on PCIe x1 slot and the AIC should be detected and enabled at boot. For S0ix, run 'suspend_stress_test -c 1'. The RP6 should not cause any suspend and resume issue. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Id2e92acf754569a22ea76a68c91aafce0075a742 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73054 Reviewed-by: Harsha B R <harsha.b.r@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/amd/common/blk/pcie: Program LTR max latenciesMatt DeVillier
PCIe bridges need to provide the LTR (latency tolerance reporting) maximum snoop/non-snoop values so that they are inherited by downstream PCIe devices which support and enable LTR. Without this, downstream devices cannot have LTR enabled, which is a requirement for supporting PCIe L1 substates. Enabling L1ss without LTR has unpredictable behavior, including some devices refusing to enter L1 low power modes at all. Program the max snoop/non-snoop latency values for all PCIe bridges using the same value used by AGESA/FSP, 1.049ms. BUG=b:265890321 TEST=build/boot google/skyrim (multiple variants, NVMe drives), ensure LTR is enabled, latency values are correctly set, and that device power draw at idle is in the expected range (<25 mW). Change-Id: Icf188e69cf5676be870873c56d175423d16704b4 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74288 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-10mb/google/sarien: Use runtime detection for touchscreensMatt DeVillier
Now that power sequencing has been implemented, switch from using ACPI "probed" flag to "detect" flag for all i2c touchscreens. This removes non-present devices from the SSDT and relieves the OS of the burden of probing. TEST=build/boot Windows/linux on drallion, verify touchscreen functional in OS, dump ACPI and verify only i2c devices actually present on the board have entries in the SSDT. Change-Id: I3b91a628cd4a9edb5d5a7521529f39b75935e1d0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-10mb/google/sarien: Set touchpad/screen IRQs to LEVEL vs EDGEMatt DeVillier
Ensure the GPIOs themselves are configured as level triggered, as well as the devicetree entiures. I2C-HID spec requires LEVEL trigger, and the drivers (both Linux and Windows) work better with LEVEL vs EDGE trigger. TEST=tested with rest of patch train Change-Id: I4fba55c938f401876798c2b32c5922523f32180f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-10mb/google/sarien: Implement touchscreen power sequencingMatt DeVillier
For touchscreens on sarien, drive the enable GPIO high starting in romstage while holding in reset, then disable the reset GPIO in ramstage. This will allow coreboot to detect the presence of i2c touchscreens during ACPI SSDT generation (implemented in a subsequent commit). BUG=b:121309055 TEST=tested with rest of patch train Change-Id: I3ce7bfc0fa4c03c0bb96bebaa3c3d256f886ecc4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-10mb/google/sarien: Add method to set GPIOs in romstageMatt DeVillier
Add method variant_romstage_gpio_table() with empty implementation to be used in a subsequent commit for touchscreen power sequencing. Call method in romstage to program any GPIOs that may need to be set. TEST=tested with rest of patch train Change-Id: I11b72a10a4a105385fbcf1d795c020708a7a90d9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-10mb/google/brya: Compile gpio.c in SMM when neededMatt DeVillier
Without gpio.c compiled in, SMMSTORE will fail to initialize and hang. Add a conditional inclusion so gpio.c is compiled in SMM when SMMSTORE is selected. TEST=build/boot google/banshee with SMMSTORE support enabled Change-Id: If049cba98f13f060807058029306dcad2ada2d49 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-10mb/google/poppy/var/nami: Fix stylus runtime detectionMatt DeVillier
Stylus reset GPIO needs to be held low in romstage, released in ramstage for runtime i2c detection to pick it up. TEST=build/boot AKALI360 variant, verify stylus detected in cbmem, functional in OS. Change-Id: I2e7f2a28f6b3a71b0c8fc367168cffbe3f064663 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-04-10mb/google/fizz/var/fizz: update VBTMatt DeVillier
Deselect the 'fixed resolution at boot' and 'eFP attached' options via the Windows BMP tool. Fixes HDMI audio output under Windows 10/11. TEST=build/boot Win 11 on Fizz, verify HDMI audio now functional. Change-Id: Iecede735bc1266af837e791e6c024aec2f9a8a80 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74235 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10security/tpm: make usage of PCRs configurable via KconfigSergii Dmytruk
At this moment, only GBB flags are moved from PCR-0 to PCR-1 when vboot-compatibility is not enabled. Change-Id: Ib3a192d902072f6f8d415c2952a36522b5bf09f9 Ticket: https://ticket.coreboot.org/issues/424 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2023-04-10mb/google/brya/var/omnigul: Add usb_lpm_incapable for DB Type-C portDtrain Hsu
Intel ADL-P USB Type-C ports are not compatible with Parade PS8815 retimer on USB U1/U2 transition. The usb_lpm_incapable config is used to disable USB U1/U2 transition for these Type-C ports. BUG=b:277149723 BRANCH=firmware-brya-14505.B TEST=Plug in device and check LPM sysfs nodes are disabled localhost ~ # cat /sys/bus/usb/devices/2-3/power/usb3_hardware_lpm_u1 disabled localhost ~ # cat /sys/bus/usb/devices/2-3/power/usb3_hardware_lpm_u2 disabled Change-Id: I618cd09f45ede0a76cf46b3e467ba87775dd5d9d Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ron Lee <ron.lee@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-10soc/mediatek/mt8188: Set pin drive strength to 8mA for NORJason Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.8 and 5.19 in MT8188 Functional Specification. BUG=b:270911452 TEST=boot with following logs [DEBUG] mtk_snfc_init: got pin drive: 0x3 [DEBUG] mtk_snfc_init: got pin drive: 0x3 [DEBUG] mtk_snfc_init: got pin drive: 0x3 [DEBUG] mtk_snfc_init: got pin drive: 0x3 Change-Id: If8344449f5b34cefcaaee6936e94f7f669c7148b Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74064 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8188: Add GPIO driving functionsJason Chen
Add GPIO driving functions to adjust pin driving. This implementation is according to chapter 5.2 in MT8188 Functional Specification. BUG=b:270911452 TEST=build pass Change-Id: I87cb8dc00c90fd5b3c0b8bdf5acb92b6f7393a73 Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74063 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8186: Move GPIO driving-related functions to commonJason Chen
Move GPIO driving-related functions to common for code reuse. BUG=b:270911452 TEST=build pass Change-Id: I234a2b7ef5075313144a930332bed10ffec00c6c Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74068 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8186: Reduce GPIO code size in bootblockJason Chen
Create a new GPIO driving info table that contains only the pins used in the bootblock. The GPIO driving info table is downsized from 1480 bytes to 24 bytes. BUG=b:270911452 TEST=build pass Change-Id: I24775ba93cd74ae401747c2f5a26bbf1c8f6ac0a Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74062 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8188: Reduce lastbus configuration size by 1280 bytesYidi Lin
Original lastbus configuration consumes constant memory size by allocating 16 and 8 members arrays and the utilization is bad. Refactor the lastbus structs to save memory usage. BRANCH=none BUG=none TEST=bootblock.raw.bin size is reduced from 60328 bytes to 59048 bytes. Change-Id: I07ff9ff7c75f03219e1792b92b62814293ef43fe Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74061 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10mb/google/geralt: Power on Samsung ATNA33XC20 eDP panelJianeng Ceng
Geralt uses Samsung panel, and Mutto is responsible for bonding the panel and touch, so rename the panel description. Add power-on sequence for Samsung ATNA33XC20 panel. EDID Info: header: 00 ff ff ff ff ff ff 00 serial number: 4c 83 62 41 00 00 00 00 28 1e version: 01 04 basic params: b5 1d 11 78 02 chroma info: 0c f1 ae 52 3c b9 23 0c 50 54 established: 00 00 00 standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 descriptor 1: 35 36 80 a0 70 38 20 40 30 20 88 00 26 a5 10 00 00 1b descriptor 2: 35 36 80 a0 70 38 20 40 30 20 88 00 26 a5 10 00 00 1b descriptor 3: 00 00 00 0f 00 d1 09 3c d1 09 3c 28 80 00 00 00 00 00 descriptor 4: 00 00 00 fe 00 41 54 4e 41 33 33 58 43 32 30 2d 30 20 extensions: 01 checksum: 6f BUG=b:276097739 TEST=test firmware display pass. Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Change-Id: Ibd2d05c7eef1360ca954316f2e76b21ed1f85be8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74115 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10mb/google/myst: Build for chromeOSJon Murphy
Adjust build configs to build Myst for chromeOS. BUG=b:270618097 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: If4b6917fe024067409bfbb3d2691c37759b5cace Reviewed-on: https://review.coreboot.org/c/coreboot/+/74097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-10mb/google/brya/var/marasov: Configure Acoustic noise mitigationFrank Chu
- Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_8 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=b:271788117 TEST=build FW and system power on. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I411c91e1e70285afbf31750a56a039d60bbe093f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
2023-04-10mb/google/myst: Declare CrOS GPIOsJon Murphy
Declare CrOS GPIOs for Myst, add relevant defines needed by chromeOS for additional control GPIOs. BUG=b:270616013 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ie876883d6ee2e3bc6324c038cefee12d99702dc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74096 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10mb/google/myst: First pass GPIO configuration for MystJon Murphy
Initial GPIO configuration for Myst. BUG=b:270596581 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ia019704c7b027f14d46281e0de0ffdbc4906a20b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74095 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10mb/google/myst: Add stubs to configure GPIOsJon Murphy
Add configuration stubs for GPIOs to be implemented later. BUG=b:270596581 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I3228f857da7c8c76cf32faf4a23418aedaf40875 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74094 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-10mb/google/myst: Add new mainboardJon Murphy
Myst is a new Google mainboard with an AMD Phoenix SOC. BUG=b:270596106 TEST=util/abuild/abuild -t GOOGLE_MYST --clean Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Id7d731ce4d6cb6d4e9041f46eb5a799865bb0b9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/74093 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-08ec/lenovo/pmh7/chip.h: Use 'bool' instead of 'int'Elyes Haouas
This to fix following error using Clang-16.0.0: /cb-build/coreboot-toolchain.0/clang/LENOVO_W500/mainboard/lenovo/t400/static.c:135:22: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .backlight_enable = 0x01, ^~~~ /cb-build/coreboot-toolchain.0/clang/LENOVO_W500/mainboard/lenovo/t400/static.c:136:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .dock_event_enable = 0x01, ^~~~ Change-Id: Icd35224877fee355e1bbb8a8e838cb047604babb Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-08sb/intel/i82801gx/chip.h: Use 'bool' instead of 'int'Elyes Haouas
This to fix following error using Clang-16.0.0: /cb-build/coreboot-toolchain.0/clang/APPLE_IMAC52/mainboard/apple/macbook21/static.c:66:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .c4onc3_enable = 1, ^ /cb-build/coreboot-toolchain.0/clang/APPLE_IMAC52/mainboard/apple/macbook21/static.c:75:32: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .p_cnt_throttling_supported = 1, ^ Change-Id: I691b51a97b359655c406bff28ee6562636d11015 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-08sb/intel/i82371eb/chip.h: Use 'bool' instead of 'int'Elyes Haouas
This to fix following error using Clang-16.0.0: CC romstage/mainboard/emulation/qemu-i440fx/static.o build/mainboard/emulation/qemu-i440fx/static.c:31:17: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .ide0_enable = 1, ^ build/mainboard/emulation/qemu-i440fx/static.c:32:17: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .ide1_enable = 1, ^ Change-Id: I36cc19bc2908119fe940941e108ee217a7b26f50 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-04-07Revert "cbfstool/default-x86.fmd: Rename BIOS -> SI_BIOS"Arthur Heymans
This reverts commit 89b4f69746ac215e4a7c5f204d1ea807b4ea08b5. SI_BIOS is mostly used to indicate the BIOS region in Intel IFD. Not all platforms are Intel platforms with an IFD, so revert this change. Also tooling often depends on names not changing so renaming things should not be done lightly. The default region should also be in sync with non-x86 and made systematic across the tree. Change-Id: I46f52494498295ba5e2a23d0b66b56f266293050 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74290 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-04-07soc/intel/common: Order the different types of cores based on APIC IDsSridhar Siricilla
Currently coreboot presents the BSP core first, then efficient cores and Performance cores as indicated below: ``` /sys/devices/system/cpu/cpu0/topology/thread_siblings_list:0-1 /sys/devices/system/cpu/cpu4/topology/thread_siblings_list:4 /sys/devices/system/cpu/cpu5/topology/thread_siblings_list:5 /sys/devices/system/cpu/cpu6/topology/thread_siblings_list:6 /sys/devices/system/cpu/cpu7/topology/thread_siblings_list:7 /sys/devices/system/cpu/cpu1/topology/thread_siblings_list:0-1 /sys/devices/system/cpu/cpu2/topology/thread_siblings_list:2-3 /sys/devices/system/cpu/cpu3/topology/thread_siblings_list:2-3 ``` Existing code presents mix of different cores to OS and causes CPU load balancing and power/performance impact. So, the patch fixes this disorder by ordering the Performance cores first, compute die efficient cores next, and finally SOC efficient cores if they are present. This is done to run the media applications in a power efficient manner, please refer the ChromeOS patches for details: https://chromium-review.googlesource.com/c/chromiumos/platform2/+/3963893 BUG=b:262886449 TEST=Verified the code on Rex system After the fix: ``` /sys/devices/system/cpu/cpu0/topology/thread_siblings_list:0-1 /sys/devices/system/cpu/cpu1/topology/thread_siblings_list:0-1 /sys/devices/system/cpu/cpu2/topology/thread_siblings_list:2-3 /sys/devices/system/cpu/cpu3/topology/thread_siblings_list:2-3 /sys/devices/system/cpu/cpu4/topology/thread_siblings_list:4 /sys/devices/system/cpu/cpu5/topology/thread_siblings_list:5 /sys/devices/system/cpu/cpu6/topology/thread_siblings_list:6 /sys/devices/system/cpu/cpu7/topology/thread_siblings_list:7 ``` Change-Id: I21487a5eb0439ea0cb5976787d1769ee94777469 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2023-04-07mb/google/brya: Enable asynchronous End-Of-PostJeremy Compostella
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post right after PCI enumeration and handle the command response at `BS_PAYLOAD_BOOT'. With these settings we have observed a boot time reduction of about 20 to 30 ms on brya0. BUG=b:268546941 BRANCH=firmware-brya-14505.B TEST=Tests on brya0 with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show End-Of-Post after PCI initialization and EOP message received at `BS_PAYLOAD_BOOT'. Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Ib850330fbb9e84839eb1093db054332cbcb59b41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74215 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-04-07soc/intel/cmn/cse: Handle EOP completion asynchronouslyJeremy Compostella
coreboot supports three instances of sending EOP: 1. At CSE `.final' device operation 2. Early as with Alder Lake in chip_operations.init if `SOC_INTEL_CSE_SEND_EOP_EARLY' is selected 3. At BS_PAYLOAD_BOOT as designed for Meteor Lake if `SOC_INTEL_CSE_SEND_EOP_LATE' is selected Currently, Alder Lake uses #3 as it results in better and more stable boot time. However, what would deliver even better result is to not actively wait for CSE completion. This patch introduces a new `SOC_INTEL_CSE_SEND_EOP_ASYNC' Kconfig which split the action of sending EOP request and receiving EOP completion response from the CSE. This patch used in conjunction with #1 can significantly improves the overall boot time on a Raptor Lake design. For example `SOC_INTEL_CSE_SEND_EOP_ASYNC' on a skolas board can deliver up to 36 ms boot time improvement as illustrated below. | # | Late EOP | Async EOP | |----------+----------+-----------| | 1 | 1020.052 | 971.272 | | 2 | 1015.911 | 971.821 | | 3 | 1038.415 | 1021.841 | | 4 | 1020.657 | 993.751 | | 5 | 1065.128 | 1020.951 | | 6 | 1037.859 | 1023.326 | | 7 | 1042.010 | 984.412 | |----------+----------+-----------| | Mean | 1034.29 | 998.20 | | Variance | 4.76 % | 5.21 % | The improvement is not stable but comparing coreboot and FSP performance timestamps demonstrate that the slowness is caused by a lower memory frequency (SaGv point) at early boot which is not an issue addressed by this patch. We also observe some improvement on an Alder Lake design. For example, the same configuration on a kano board can deliver up to 10 ms boot time improvement as illustrated below. | # | Late EOP | Async EOP | |----------+----------+-----------| | 0 | 1067.719 | 1050.106 | | 1 | 1058.263 | 1056.836 | | 2 | 1064.091 | 1056.709 | | 3 | 1068.614 | 1055.042 | | 4 | 1065.749 | 1056.732 | | 5 | 1069.838 | 1057.846 | | 6 | 1066.897 | 1053.548 | | 7 | 1060.850 | 1051.911 | |----------+----------+-----------| | Mean | 1065.25 | 1054.84 | The improvement is more limited on kano because a longer PCIe initialization delays EOP in the Late EOP configuration which make it faster to complete. CSME team confirms that: 1. End-Of-Post is a blocking command in the sense that BIOS is requested to wait for the command completion before loading the OS or second stage bootloader. 2. The BIOS is not required to actively wait for completion of the command and can perform other operations in the meantime as long as they do not involve HECI commands. On Raptor Lake, coreboot does not send any HECI command after End-Of-Post. FSP-s code review did not reveal any HECI command being sent as part of the `AFTER_PCI_ENUM', `READY_TO_BOOT' or `END_OF_FIRMWARE' notifications. If any HECI send and receive command has been sent the extra code added in `cse_receive_eop()' should catch it. According to commit 387ec919d9f7 ("soc/intel/alderlake: Select SOC_INTEL_CSE_SEND_EOP_LATE"), FSP-silicon can sometimes (on the first boot after flashing of a Marasov board for instance) request coreboot to perform a global request out of AFTER_PCI_ENUM notification. Global request relies on a HECI command. Even though, we tested that it does not create any issue, `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag should not be associated to the `SOC_INTEL_CSE_SEND_EOP_EARLY' flag to prevent potential a global reset command to "conflict" with the EOP command. This patch also introduces a new code logic to detect if CSE is in the right state to handle the EOP command. Otherwise, it uses the prescribed method to make the CSE function disable. The typical scenario is the ChromeOS recovery boot where CSE stays in RO partition and therefore EOP command should be avoided. [DEBUG] BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 14 ms [INFO ] HECI: coreboot in recovery mode; found CSE in expected SOFT TEMP DISABLE state, skipping EOP [INFO ] Disabling Heci using PMC IPC [WARN ] HECI: CSE device 16.0 is hidden [WARN ] HECI: CSE device 16.1 is disabled [WARN ] HECI: CSE device 16.2 is disabled [WARN ] HECI: CSE device 16.3 is disabled [WARN ] HECI: CSE device 16.4 is disabled [WARN ] HECI: CSE device 16.5 is disabled BUG=b:276339544 BRANCH=firmware-brya-14505.B TEST=Tests on brya0 with and `SOC_INTEL_CSE_SEND_EOP_ASYNC' show End-Of-Post sent soon after FSP-s and EOP message receive at `BS_PAYLOAD_BOOT'. Verify robustness by injecting a `GET_BOOT_STATE' HECI command with or without `heci_reset'. The implementation always successfully completed the EOP before moving to the payload. As expected, the boot time benefit of the asynchronous solution was under some injection scenario undermined by this unexpected HECI command. Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I01a56bfe3f6c37ffb5e51a527d9fe74785441c5a Reviewed-on: https://review.coreboot.org/c/coreboot/+/74214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-06tree: Replace `egrep` with `grep -E`Felix Singer
For compatibility reasons, egrep is just a wrapper around grep today. Thus, replace it with `grep -E`. Change-Id: Ief08a22e4cd7211a3fee278492c95d37f9e058fa Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-04-06soc/intel/meteorlake: Perform feature control lockSubrata Banik
This function calls into `set_feature_ctrl_lock()` to lock IA32_FEATURE_CONTROL MSRfeature control. TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie9a03ee6786144dae6fd3a18bcc53cb62919dd42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 04:32:11 +0000