summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-21src/driver/vpd: Update vpd_decode from upstreamHung-Te Lin
The upstream vpd_decode.c has been revised to prevent overrun of decoded contents. BUG=chromium:967209 TEST=select VPD config on kukui; make; boots on at least kukui boards. Change-Id: I1a50670a66b7b174d2a432c29d90152b86c32982 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21siemens/mc_apl5: Change PTN interface settingsMario Scheithauer
Switch the default clock output for single LVDS mode to odd bus only. Change-Id: I278e761566a112d95cbd6c79e09c076d70b93e8f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-21siemens/mc_apl5: Enable TPM supportMario Scheithauer
This patch enables TPM on SPI and adds the needed devicetree entry for mc_apl5. TEST=Build coreboot for mc_apl5 board and check the TPM console output. In addition the TPM was correctly verified by our Linux driver. Change-Id: Iafc967c7a2bfee9bdb9b6591d12328620e2887cc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33173 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Increase SPI flash speed to boot fasterMengqi Zhang
Increase SPI flash speed from 26MHz to 56MHz and set correct tick_dly to get faster boot process. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I8f44883b4f4a198146330caf5420dc39d5592a0a Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32462 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
Add spi tick_dly setting for high-speed spi xfer. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
Set SPI GPIO driving to support SPI FLASH. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I95002ec71abd751c33c089185db04ed4a8686699 Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32460 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Enable RTCYou-Cheng Syu
Enable RTC so that we can see correct timestamp in CrOS eventlogs. BUG=b:134461866 TEST='mosys eventlog list' shows correct timestamp on Kukui Change-Id: Ie9ef7c9343c781e348429cd5376a4a5519641e16 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-06-21mediatek/mt8183: Support RTC in ramstageYou-Cheng Syu
We need to support RTC in ramstage so that we can see correct timestamp in ChromiumOS eventlog. BUG=b:134461866 TEST='mosys eventlog list' shows correct timestamp on Kukui Change-Id: Idb0fe5c05e4ecdf0e6398e3c781c71d14f85f19b Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add efuse calibration in auxadcjg_poxu
The values from auxadc may be incorrect if not calibrated by efuse. Without calibration, the value error range is about +/-50mv, and after being calibrated the error range is about +/-10mv. BUG=b:131391176 TEST=make clean && make test-abuild; boots on Kukui rev 2 units. BRANCH=none Change-Id: Iccd6ea0ad810c993f9b62c0974279c960f890e52 Signed-off-by: Po Xu <jg_poxu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32800 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: JG Poxu <jg_poxu@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Revise FMAP firmware layoutHung-Te Lin
Adjust FMAP sections that - ELOG only needs 4K (by driver limitation) - SHARED_DATA only needs 4K or less (for netboot params) - SMMSTORE is probably not needed since UEFI@ARM is not available yet - VPD can be smaller (most x86 devices have only 16/8K for RO/RW) - Increase RW_LEGACY to 1M (recommended value) - Move all new saved space to CBFS BUG=b:134624821 TEST=Built Kukui image and boots on Rev2 units. Change-Id: Id2910df73ea47bfa32e056d631d1c3e5f1eed0d1 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21cpu/amd/family_10h-family_15h: Fix 'if' condition identical branchesElyes HAOUAS
Change-Id: I1c937a62388c38090ee2cc3228973cfb8361bac7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-06-21soc/intel/common/block/pcr: Remove unneded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33336 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/google/snappy: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I7b6c319a58b9f4f47de19336d18d00b73d3d3772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21ec/kontron/kempld/kempld_i2c.c: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I0843bebe48e4b91fc76c440ae33bbca838621de9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21ec/google/chromeec/ec_lpc: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I98d0ab0d139186b312e8c1086c475ba6ef0b7d3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21drivers/intel/fsp1_0/fastboot_cache: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I109f5aaa87afde61a36fff884305b43c1de2c680 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21arch/x86/rdrand.c: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: Ib7bdefb0027a35de42f6a665b98f9e5a2791061f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21lib: Prevent memory leak on error pathJacob Garber
Free the tree before returning to prevent a leak. Change-Id: I1132c0e7404eec1af3adc19a83257f28563f8a58 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1401799 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21drivers/amd/agesa: Assert that StdHeader is non-nullJacob Garber
Coverity believes there is a path where StdHeader is possibly null. This *should* be incorrect, since the header is actually initialized through the module dispatch framework, though Coverity can't see it due to the extensive type-punning. However, the control flow is so dizzingly complicated that I'm not even completely sure, so adding an extra assert to be careful won't hurt anyway. Change-Id: If3d7c5d5c5bba846e7453b3dbc824e2208d749fb Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1379932 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-21nb/amd/amdmct/mct: Remove duplicate if conditionJacob Garber
The case when Speed == 5 is already dealt with on line 111. Change-Id: Icc41c00fb333a51001568f588c17f7b6c6a3a923 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229626 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21nb/amd/amdmct/mct_ddr3: Remove duplicate conditionalJacob Garber
This check is already performed at the beginning of dct_ddr_voltage_index(). Change-Id: Ia73025333c152f14249afb16d05f66791e69e7cb Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1347322, 1347323 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21nb/amd/amdmct/mct_ddr3: Remove duplicate codeJacob Garber
This conditional is exactly the same as the one right below it, except the operations are reorganized slightly. Change-Id: I00c19a467d23a0736bc2a33b516f97080039e634 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1347321 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21vboot: relocate code to log and clear recovery mode switchJoel Kitching
Logging and clearing the recovery mode switch doesn't have anything to do with vboot_handoff. Move it to the main verstage logic file. BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2e74f3893463e43fe5fad4a8df8036560f34e0db Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21vboot: remove functions which read vboot_handoff.out_flagsJoel Kitching
These functions are no longer used and may be removed: * vboot_handoff_check_recovery_flag * vboot_get_handoff_flag BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ie05652ef1288eef74bd2e7e8bea79fd29d523859 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33533 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21vboot: remove vboot_handoff_get_recovery_reasonJoel Kitching
Two functions retrieve vboot recovery_reason: * vboot_handoff_get_recovery_reason * vboot_get_recovery_reason_shared_data Previously, when CBMEM comes online, a vboot_handoff data structure is created, and depending on the architecture, coreboot may eventually lose access to vboot_working_data. After implementing vboot_working_data CBMEM migration, vboot_working_data is always guaranteed to be accessible. vboot_get_recovery_reason_shared_data is corrected to also allow accessing vboot_working_data in ramstage and postcar. Now, vboot_handoff_get_recovery reason returning a valid recovery reason implies that vboot_get_recovery_reason_shared_data should *also* return a valid recovery reason. Thus we may remove the former. BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: Iac216dc968dd155d9d4f8bd0f2dfd5034762f9a0 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
The default voltage of vsim2 is set to 2.76V for sim card usage. In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage. However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V. So we set it to 2.7V with modifying calibration value. BUG=b:126139364 BRANCH=none TEST=measure vsim2 voltage with multimeter Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-20soc/intel/braswell/smbus.c: Add support for i2c mode block writeFrans Hendriks
Intel Braswell supports i2c block write using SMBus controller. smbus_i2c_block_write() is added to configure SMBus controller in i2c mode before calling do_i2c_block_write(). Add smbus.c to ramstage. BUG=N/A TEST=Verify LCD display is working on Facebook FBG-1701 Change-Id: I50c1a03f624b3ab3b987d4f3b1d15dac4374e48a Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-20southbridge/intel/common/smbus: Add do_i2c_block_write()Frans Hendriks
Intel Braswell supports i2c block writes using SMBus controller. This support is missing in actual smbus routines. Add do_i2c_block_write() which is a based on do_smbus_block_write() but also write first byte to SMBHSTDAT1. The caller needs to configure the SMBus controller in i2c mode. In i2c mode SMBus controller will send the next sequence: SMBXINTADD, SMBHSTDAT1, SMBBLKDAT .. SMBBLKDAT To ensure the the command is send over the bus the SMBHSTCMD register must be written also BUG=N/A TEST=Config eDP for LCD display on Facebook FBG-1701 Change-Id: I40f8c0f5257a62398189f36892b8159052481693 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-20mb/google/hatch: Remove unused USB2 port5 from baseboard devicetreeAamir Bohra
Hatch newer board revision do not use USB port5 for discrete BT. Hence remove the port configuration and UBS2 P5 asl entry. The older board version would continue to use USB2 P5 hence moved the entry to overridetree.cb Change-Id: I98297d6b81e3184b7b0a14710f3790f5df30d68b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-06-19mb/intel/whl_rvp: Configure FSP UPDs of DDI ports for whlrvpsridhar
This patch configures FSP UPD values for HPD and DDC of DDI ports for WHLRVP. BUG=none TEST=Tested that eDP & DP works on WHLRVP Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: sridhar <sridhar.siricilla@intel.com> Change-Id: I576469f5564e3e56159762752dbe4557e9dc1912 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33435 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19sb/nvidia/ck804/fadt.c: Remove unused LONG_FADTElyes HAOUAS
LONG_FADT is not used at all. So remove it and use sizeof(acpi_fadt_t) for header length. Change-Id: I433d1b2e0f3b9505d7c52eb14f1a476fbe52a284 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-19{mb,sb}: Use get_acpi_table_revision(FADT)Elyes HAOUAS
Change-Id: Id3d7f021a52e08906ae0a3f794756e397601fe96 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33428 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19sb/intel/common/spi: Properly check if setting FRP succeededArthur Heymans
Change-Id: Ib0b63c3b0342c62aeabb5c6e418eb9811fc6597d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-19grunt: Change Bayhub eMMC base clock to 200MHzRaul E Rangel
The clock was previously set to 52MHz to workaround the fact that depthcharge didn't support tuning. Tuning has now been enabled in depthcharge: https://chromium-review.googlesource.com/c/chromiumos/platform/depthcharge/+/1655553 BUG=b:122244718 TEST=Verified on grunt that it speeds up boot by 130ms Change-Id: If847cea2a7848bcd175958db86e652d4f710201a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-19util/amdfwtool: Update for Family 17hMarshall Dawson
Add arguments for additional PSP blobs needed with Family 17h support, including the new AGESA binary loaders. Create a new type of structure and entry for a BIOS directory table, containing PMU code, microcode updates, as well as the BIOS initial code. Details on each of these items may be found in the AMD Platform Security Processor BIOS Architecture Design Guide for AMD Family 17h Processors (NDA only, #55758). BUG=b:126593573 TEST=Used with WIP Picasso Change-Id: I4899dedb6f5e29a27ff53787a566d5b8633a8ad5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-19lib/spd_bin.c: Remove unused include <arch/byteorder.h>Elyes HAOUAS
Change-Id: Ifb8171e559c5c8081597291ffefabc676c7fa5e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-19src/mainboard: Remove unused include <arch/byteorder.h>Elyes HAOUAS
Change-Id: I3d638febddbd88cd4870795f96dd1bbf123c7ba3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33537 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/lenovo/*/romstage: Remove unused include byteorder.hPeter Lemenkov
Change-Id: I3e500aafd26b7524a6782883b9a30f55b544102d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33511 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/lenovo/z61t/romstage: Remove unused includePeter Lemenkov
This commit follows up on commit commit 89989cf6 with Change-Id: I1f44ffeb54955ed660162a791c6281f292b1116a ("src: Drop unused include <arch/acpi.h>"). Change-Id: I3dc12373b32b95d25ba7b302cbca5f927678315d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33365 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/lenovo/t60/romstage: Remove unused includePeter Lemenkov
This commit follows up on commit 8b7a1614 with Change-Id: I73c557d6ef009fb2cac35fdea500dee76f525330 ("src/mainboard: Remove unneeded include <arch/io.h>"). Change-Id: I7f307bf5b6cdcfebe1a290ce344b962fcecc8781 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-19mb/lenovo/x201: Remove unneeded includesPeter Lemenkov
Tested: still builds fine. Change-Id: I1ca4e42bd75a3e84afe8b30a60f02058b590416f Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-19src/arch/x86/smbios: Change SMBIOS Version to 2.8Christian Walter
Change the SMBIOS Version from 2.7 to 2.8. Necessary changes were already pushed in https://review.coreboot.org/c/coreboot/+/33031 Change-Id: I237cdee7d43e814397b958e4cf941bf58949088d Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-19xcompile: Fix harmless typoNico Huber
As CFLAGS_GCC and CFLAGS_CLANG are still the same at this point, this just removes some duplicate flags. Change-Id: I532e5fa146891b70e4c1949c614b280055524593 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-19acpi: Add SPMI tablePatrick Rudolph
Add the SPMI table as defined in the IPMI spec v2: https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf Tested on Wedge100s. Change-Id: Idff5134ce4c124f7e76acb0080da404b0c0dfffe Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33487 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet specJohn Su
After adjustment on Hatch Touch Pad CLK: 383.4 KHz Touch Screen CLK: 381.6 KHz SAR Sensor CLK: 392.0 KHz Audio codec CLK: 386.0 KHz BUG=b:134911522 BRANCH=master TEST=emerge-hatch coreboot chromeos-bootimage measure by scope with hatch. Change-Id: Iee2b692c268381af267b70e92a577ac89ce41cbb Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-18drivers/i2c/sx9310: Print I2C SAR device infoEric Lai
Print I2C SAR device info so that it is available in cbmem logs. BUG=none BRANCH=none TEST=Boot up and check cbmem -c can find the SAR I2C info Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia143932bb660ed2c2cea76310f11ede2b727adf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33432 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-18sb/amd/cimx/sb900: Change logical negation to bitwiseJacob Garber
data &= !BIT0 will clear data, since !BIT0 evaluates to 0 (oops). We only want to clear bit 0, not the whole thing, so use bitwise negation instead. Change-Id: I2179119e0d2d4aceaf4f8b499bf4c5baf4ef677f Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1241812 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-06-18sb/intel/bd82x6x/lpc.c: Remove reinitializing the SPI driverArthur Heymans
This was done to update the global variable g_ichspi_lock but this is now removed in favor of reading the lock bit during runtime instead of keeping track of the state. Change-Id: I8cb69a152b0e050d64d8979ee92de2d24136f8dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33390 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-18sb/intel/spi: Check for the SPI lock bit during runtimeArthur Heymans
The SPI swseq controller can be locked in other parts of the code, for instance when it's locked down in the finalize section. The driver has to be made aware of that. The simpler solution is to not keep track of the state and simply read out the lock bit on each SPI transfer. Change-Id: Ifcd5121b89d6f80fc1c1368786982d0d9fa1bf61 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-18sb/intel/common/spi.c: Add a pointer to the ich7 SPI registersArthur Heymans
Change-Id: I7509dc2124ee7057af075c7d0607ec615b930fa3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-18sb/common/intel/spi.c: Don't use typedefs for structsArthur Heymans
Change-Id: Id0ed621b5b4b5634d454811b1e1beeb27fc69ea8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-18soc/intel/skylake: Select microcode updates depending on discrete PCHArthur Heymans
Change-Id: I05e97484605306afc70c726187bda8091216c9cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-18Makefile.inc: Update 3rdparty/intel-microcode on USE_BLOBSArthur Heymans
Change-Id: I0caeff3ff5613a594a79441e849440ebdc9a9b87 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-18Add intel-microcode submodule repositoryzaolin
Change-Id: Icc5ac0a8033e371ecf2b4b28ba45dab961e86b3f Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-06-18commonlib: define cbtable tags as enum to identify conflictsPatrick Georgi
We had a value that was overloaded thrice. By moving them in a common structure and ordering them by value such issues are hopefully avoided in the future. Also add a few values to libpayload that were only defined in commonlib. Change-Id: I227d078eebee2d92488454707d4dab8ecc24a4d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32958 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-18libpayload: define cbtable tags as enum to identify conflictsPatrick Georgi
We had a value that was overloaded thrice. By moving them in a common structure and ordering them by value such issues are hopefully avoided in the future. Change-Id: I0c7762601d7620413989b458fa634d7606accc9d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32957 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-18MAINTAINERS: Add maintainers to ELTAN VENDORCODEFrans Hendriks
Add maintainers to the new vendorcode. Change-Id: Ie3f99dd99c708f93bfcd19f52c57504e157e1eca Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-18drivers/ipmi: Fix multiple issuesPatrick Rudolph
* Set abort command define * Set debug level to SPEW * Support zero length data packet in ipmi_kcs_send_message That's required for commands like GET_DEVICE_ID, which have no additional data to send. * Read reply even if given no receive buffer * Prevent buffer overflow in read reply processing Tested on Wedge100s. Change-Id: Iefddd88a744c3b96751d3fe8c2951ca2115548ce Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33488 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-17arm64: make comment match codeMarty E. Plummer
Change-Id: I37b8d5715cb6a32d4853e77098094cd5cffb9a4c Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-17mb/google/poppy/variants/atlas: Update DPTF parameterPuthikorn Voravootivat
The temperature delta between on-board thermistor and surface temp change, so update DPTF parameter accordingly. BUG=b:113101335 TEST=Tested in thermal chamber by thermal team. See comment 148 / 153 in the bug. Change-Id: Ie18be94fc1e7476755fb0e6947cce559854a82dd Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2019-06-17doc/mb/upsquared: Add documentationFelix Singer
This patch adds documentation about the UP² mainboard and the IFWI used by Apollolake platform. Change-Id: Ic708ddbd2616eee4e5ec2740b3eac18b408bde38 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-17src/mb/gigabyte/ga-h61m-s2pv: Correct devicetreeAngel Pons
Subsystem IDs were missing and GPIO settings were wrong. Plus, the PCI bridge was erroneously enabled, this board uses an ITE IT8892E PCIe to PCI bridge instead. Tested, board still boots. Change-Id: Ieb9dd8c835bc3652e7a3a118feca5551196bb81b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-173rdparty/blobs: Update submodule, SNB improvementsArthur Heymans
The sandybridge systemagent-r6 blob is modified: - To be more flexible about the location of the stack w.r.t. the heap - Place the MRC pool right below the MRC_VAR region - to work with the same DCACHE_RAM_BASE from the native raminit (could make the CAR linker symbols easily compatible if desired) This allows CAR setup compatibility between mrc.bin and native bootpath and also allows for BIOS/memory mappeds region larger than 8MB. This changes the semantics of CONFIG_DACHE_RAM_MRC_VAR_SIZE to also include the pool on top of MRC_VAR region. TESTED on T520 (boots and resumes from S3 with mrc.bin). Change-Id: I17d240656575b69a24718d90e4f2d2b7339d05a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33228 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-16drivers/ipmi: Fix coding stylePatrick Rudolph
Fix 'do not use assignment in if condition'. Change-Id: I6e1b81a1b87de4315391618968c59cc3d3a66a77 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-16mb/google/hatch: Move memory strap GPIOs under variant gpio headerAamir Bohra
Move the memory strap gpios to variant/gpio.h, as the memory straps are different for helios. Change-Id: I1833c9539687011ee27fd3e88c0581e30ca59354 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-16mb/lenovo/*/smihandler: Remove unused includePeter Lemenkov
All usage of pci_read_config8 was removed in commit d44d4f0f with Change-Id Ia959eb5b747846048396e66d4c926c96c27f3878 ("mb/lenovo/*: Remove useless smihandler code"). So we don't need this include anymore. Change-Id: Ic4f038c80e17799016ae7e92a5675cfe7c71e400 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-16soc/intel/common: Fix booting issue without default IGD enabledSubrata Banik
This patch ensures to boot platform without onboard GFX (PCI B0:D2:F0) enabled from mainboard devicetree.cb. TEST=Previously platform was dying at "GMADR is not programmed!" with IGD disabled. Change-Id: I8c907ee25db4538a84890f2ccc3187afa86604b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33449 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-15arch/x86/Kconfig: hide the "Bootblock behaviour" option on non-romccArthur Heymans
Selecting which cbfs prefix to load is only implemented with the romcc bootblock. Change-Id: I09523b94605f00ab15b5f0ea3986ac08e3a6afc6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-15arch/x86/Kconfig: Hide the prefix option on all but BOOTBLOCK_NORMALArthur Heymans
Change-Id: Icf5e8fa18bea1cdfb85b8a4999d8fccea94d16b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-15Makefile.inc: Add -Wlogical-op warning optionElyes HAOUAS
Change-Id: Ie0491817a3a69c9f8e6f0f0d3cb755c642819df9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-15vendorcode/agesa/*/Proc/IDS/Library/IdsLib.c: Fix logical 'or' testsElyes HAOUAS
"if (_pcidata != 0xFFFFFFFF || _pcidata != 0)", is always true. The right test should be && not ||. Error found using -Wlogical-op warning option. Change-Id: I537fa4867499e1e6e5f662086fabc99b91aa0c70 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-15vendorcode/agesa: Fix check for valid PhyLaneElyes HAOUAS
Found using GCC with flag -Wlogical-op Change-Id: Ia04ac5b1d0a4434c0ab2ca583b9b03dbfd0ffd41 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33362 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-15nb/amd/amdmct/mct: Simplify conditionalJacob Garber
These if statements can be combined to merge the two branches of the conditional and remove the duplicate pDCTstat->Speed == 3 check. Change-Id: I41aa19b4b7ed7b1a0e4f83f72e66869760e677dd Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229583 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
Helios has a number of GPIO changes w/r/t to its baseboard. Override early, sleep and normal GPIOs as appropriate. BUG=b:135257452 BRANCH=none TEST=Compile only (no boards to test with) Change-Id: I45793ad6515df5af5b925d92106bd943374353d4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-15mb/google/octopus/variants/bloog: Set tcc offset for bloogTony Huang
Change tcc offset from 0 to 10 degree celsius for bloog. BUG=b:135225497 BRANCH=octopus TEST=Build and verify test result by thermal team. Change-Id: I4cbff846914a776c67692005f8b40cd73cfaf231 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-06-14mb/google/poppy/var/nami: Ensure SPD index is non-zeroJacob Garber
Memory id's are 1-indexed for DDR4, so we need to check that the SPD index is non-zero before converting it to the 0-indexed value in the bitmap. Change-Id: Icc542239d91c39b89c23f31856c28e7c20b2fc4d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1387028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-14device/cpu_device.c: Use 'unsigned int' instead of 'unsigned'Elyes HAOUAS
Change-Id: I9f96d8c8e6cf2715e62ab3715da83740db8cce40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Vlado Cibic
2019-06-14libpayload/i8042/keyboard: Log errors during initializationFurquan Shaikh
Add error messages for all failed commands in keyboard_init(). Change-Id: Ie42ccbc4d850912c83e00376b27f192d5b652057 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14nb/i945: Drop CHANNEL_XOR_RANDOMIZATION selectionElyes HAOUAS
CHANNEL_XOR_RANDOMIZATION is configurable for no reason. Change-Id: I31e6ed6cb040dcba756cbfd2247d90753d372915 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-14drivers/fsp1_0: select CACHE_MRC_SETTINGS if MRC_CACHE_FMAPMatt DeVillier
Rather than force the user to create the RW_MRC_CACHE FMAP region, simply select CACHE_MRC_SETTINGS so it's done automatically for them. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Iaa1da6015c1bfafe8ea81ca34ef8851f0c689487 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-14hatch: Fix pen eject wake polarityTim Wawrzynczak
The gpio_key wakeup_event_action in the ACPI tables was backwards, causing devices to wake up on pen insertion instead of removal. Changed to EV_ACT_DEASSERTED. BUG=b:134547896 BRANCH=none TEST=Verified in OS, device only wakes up on pen removal Change-Id: I0816ed9fb23cf00fd8e40bcdd25ff7a9f48badbd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33427 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
Update Helios device tree override to match schematics. BUG=b:133182138 BRANCH=none TEST=Compiles Change-Id: I3d15fc43651a289d16ffb3cfadaea8f786e858fc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33050 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14util/superiotool/nuvoton.c: add NCT5539D register dumpPavel Sayekat
Values taken from NCT5539D datasheet V1.1 (June 30th, 2015). Tested on ASUS-H110M-E/M.2 mainboard (Kabylake i3-7100 CPU). Change-Id: Ib55068035ca574b22d0fea81e1a291f7cf0329d3 Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
Change the SPD makefile to use the LPDDR3 SPDs. Set up the arrays for mapping SoC DQS pins to LPDDR3 pins. BRANCH=none BUG=b:133455595 TEST=`FEATURES="noclean" FW_NAME="helios" emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage` Ensure the firmware builds without error. Change-Id: Iebaba2ec65dfcf36674b4733b421ada107b22b09 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33456 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13ec/google/wilco: Read back from EC RAM after S0ix entryDuncan Laurie
We are seeing an EC interrupt after setting the EC RAM offset that indicates that the EC should transition to S0ix mode and this is preventing the kernel from going into S0ix on the first try. As a workaround if we read back from the EC RAM while still in the _DSM handler it seems to prevent this problem. BUG=b:130644677 BRANCH=sarien TEST=ensure s0ix entry works on the first try with sarien Change-Id: Id607c4c2b14b79d0cd1bcea0c2032be2f2c0c141 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33455 Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/sarien: Disable unused GPIOsDuncan Laurie
These 4 GPIOs are being disconnected in the next board so use the board ID to configure these pins as not connected to ensure they do not cause leakage. Also remove the ACPI _PTS S5 code that was configuring the GPIOs. This does mean they will cause small leakage in S5 on existing boards, but it will not affect the new boards. BUG=b:132393441 TEST=boot on sarien with fake board ID and ensure that coreboot configures these pads as expected. Change-Id: I6ac04b9a635829811a09aeab7cba3bb58cfcff47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2019-06-13lint/clang-format: set to 96 chars per linePatrick Georgi
coreboot has decided to go with 96 characters per line. Original Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original Reviewed-on: https://review.coreboot.org/c/coreboot/+/31651 Change-Id: I9c99e5cca6548e23cf755dc37193ff2aa669ac10 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-13nb/amd/amdfam10: die() on out of bounds readsJacob Garber
These two functions try to access arrays of lengths 32 and 64 at indices of at most 259 and 71 (respectively). Something here is seriously wrong. This code was introduced in 2007, and aside from cosmetic changes, has had no modifications since then. I don't know what this code is supposed to do, and asking around on IRC, no one else did either. Until someone has the interest and time to work on it, let's at least add a die() to prevent the out of bounds access and alert the user that something is wrong. Change-Id: I5fc15a50a9f0e97add31e3a40da82a15f7427358 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 12296{79-82} Reviewed-on: https://review.coreboot.org/c/coreboot/+/33404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-13Documentation/soc/amd: Add Family 17hMarshall Dawson
Begin a directory for AMD soc devices and add an explanation of how Family 17h works. Newer AMD systems use a unique paradign for initializing the x86 processors. Change-Id: I7bd8649996add80747f6a60b9dfd35a94a560be1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-13util/amdfwtool: Add multilevel PSP directory tableMarshall Dawson
Add the ability to generate two PSP directory table levels. The PSP is capable of supporting two levels, with the primary intended to remain pristine for the life of the system, and the second updatable. In the event the second becomes corrupted, the primary is still sufficient to allow a recovery of the other. This patch modifies no directory table structures currently in use. The soc or southbridge must pass an argument to force building the secondary table. BUG=b:126593573 TEST=Used with WIP Picasso Change-Id: Id321f5142e461d4a7f3343c0835a09a1a1128728 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-13util/amdfwtool: Align PSP NVRAMMarshall Dawson
Align the PSP's NVRAM item since it's intended to be updateable in the flash device. Change-Id: I6b28525624b95b411cc82de0cbe430ea7871149d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-13util/amdfwtool: Add argument for soft fuse overrideMarshall Dawson
Allow the soc build to pass a soft fuse value to the utility. This helps maintain compatibility across PSP generations. Add a generic 'other' item to the amd_fw_entry structure that may be used by non-fuse entries in the future. TEST=Verify google/grunt amdfw.rom unchanged before and after. Compare internal board using override before and after. Change-Id: I26223f0b42ad28c43d9bd87419a2a8f719ee91cb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-13util/superiotool: clarify usage of MISC and NANA definesFelix Held
Change-Id: I0b3c5c810bfb05eaec13511391ecd55d7b9eb4e8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-13Set ENV_PAYLOAD_LOADER to ENV_POSTCAR when CONFIG_RAMPAYLOAD is enabledSubrata Banik
Change-Id: I416c74ea83ee68370bbeb53834054bcb18e631e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-06-13stage_cache: Make empty inline function if CONFIG_NO_STAGE_CACHE enableSubrata Banik
This patch removes CONFIG_NO_STAGE_CACHE check from caller function and add empty inline function incase CONFIG_NO_STAGE_CACHE is enable. Change-Id: I8e10ef2d261f9b204cecbeae6f65fda037753534 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
This patch is not actually disabling HECI1 as it requires a dedicated FSP UPD for WHL/CML SoC code to set this HECI1 chip config. Change-Id: Ia88f3315a9dc3365d0acc13ed887e7c596c97c91 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-13soc/intel/{cml, whl}: Add option to skip HECI disable in SMMSubrata Banik
This patch provides an additional option to skip HECI function disabling using SMM mode for WHL and CML platform, where FSP has dedicated UPD to make HECI function disable. User to select HECI_DISABLE_USING_SMM if FSP doesn't provided dedicated UPD. Right now CNL and ICL platform will use HECI_DISABLE_USING_SMM kconfig to make HECI disable and WHL/CML has to rely on FSP to make HECI disable. Change-Id: If3b064f3c32877235916f966a01beb525156d188 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-13soc/intel/icelake: Replace PCI device LPC to ESPI as per EDSSubrata Banik
As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI, hence modify SoC code to reflect the same. This patch replaces all SoC specific PCI LPC references with ESPI except anything that touches intel common code block. Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2019-06-13libpayload: Add USB support to mistral configPatrick Georgi
Change-Id: I2ef42f7d607eec6166d762ad71c0d9540906589d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: SANTHOSH JANARDHANA HASSAN <sahassan@google.com>
2019-06-12vendorcode/intel/fsp/fsp2_0/cometlake: Update FSP-M/S header files as per v1155Aamir Bohra
This CL implements below changes: 1) Update FSP-M and FSP-S header files as per FSP release version 1155. 2) Update the PcdSerialIoUartNumber reference in fsp_params.c with SerialIoUartDebugControllerNumber. Change-Id: I6d412424f9f5c5d2d56b789c2fef4bdb817a3019 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32844 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 19:41:10 +0000