summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-22drivers/tpm/cr50: Use cr50_get_firmware_version in get_board_cfgTim Wawrzynczak
cr50_get_board_cfg() may be called in ramstage for some mainboards in order to determine the BOARD_CFG register's value. The code was written assuming that the firmware version was already retrieved, but for boards calling this in ramstage, this is not the case. Therefore, instead of using the cached cr50_firmware_version (which is all 0s in ramstage at that time), use the cr50_get_firmware_version function instead. BUG=b:225206079, b:220685274 BRANCH=firmware-brya-14505.B TEST=boot on brya0 and see: [INFO ] Firmware version: B2-C:0 RO_B:0.0.11/4d655eab RW_B:0.6.93/cr50_v3.94 [INFO ] Enabling GPIO PM b/c CR50 has long IRQ pulse support in the logs. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia6e5f4965a8852793d2f95e6eb21ea87860335a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-22mb/google/brask/variants/moli: init overridetree for moliRaihow Shi
init overridetree.cb based on the schematic adl_rfq_mb_20220310.pdf BUG=b:220814038 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I8829d4b39d48ae574eeccbfc62e79b671211ae2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-22mb/google/brya/variants/crota: set up gpioTerry Chen
Set the GPIO configuration of crota by bernadino 14 adl-p 20220112.pdf BUG=b:219891328 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I164bc7a8b682eb8682f02b06708bc7c72a5c449a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-22soc/amd/common: move FCH IOAPIC and HPET init from SMBUs to LPC deviceFelix Held
Despite the SMBus device being function 0 of the FCH PCI device, the MMIO resource of the FCH IOAPIC is on the LPC device which is function 3 of the same PCI device, so move the FCH IOAPIC initialization code to the LPC device. Since the HPET was enabled in the same function, also move it to the LPC device initialization. TEST=On Mandolin both IOAPICs are still correctly detected by Linux. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I585afd463c1c00cd87ced0617e7802503c5deba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58334 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-22util/spd_tools: Add support for exclusive IDsRobert Zieba
Currently memory parts that use the same SPD are assigned the same ID by spd_tools. This commit adds support for exclusive IDs. When given an exclusive ID a memory part will not share its ID with other parts unless they also have the same exclusive ID. BUG=b:225161910 TEST=Ran part_id_gen and checked that exclusive IDs work correctly and that the current behavior still works in their abscence. Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: Ife5afe32337f69bc06451ce16238c7a83bc983c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-22mb/google/brya/var/kinox: Modify DDR4 to non-interleavedDtrain Hsu
Kinox is designed to 8-layer PCB. In order to reduce the length of memory singals, the DDR4 is designed from interleaved to non-interleaved. BUG=b:210094309 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I03c6fcccf8b1646cec1a35cc1f9cbb1cfb942c4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-22mb/google/brya/var/taeko: Disable GL9763e PCIE port L0sKevin Chang
GL9763e doesn’t support L0s state, so disable L0s at the root port. BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I6ed790c833d1c01a30aed0fd09cac260a3837ead Reviewed-on: https://review.coreboot.org/c/coreboot/+/62973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
2022-03-22soc/intel/{adl,common}: Add ASPM setting in pcie_rp_configKevin Chang
This change provides config for devicetree to control ASPM per port BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles on taeko. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I19b5f3dc8d95e153301d777492c921ce582ba988 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62919 Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin L Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-22mb/google/brya/var/taeko: Enable Genesys L1 max entry delayKevin Chang
The workaround causes the eMMC controller to not enter its L1 during the boot process BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I142a816611e204e6c8577d15b3f0a0e08251f848 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <martinroth@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
2022-03-22drivers/genesyslogic/gl9763e: Add set L1 entry delay to Max for GL9763EBen Chuang
Add an option to set L1 entry delay to Max for GL9763E. The L1 entry delay will be changed to expected value by sdhci-pci-gli driver in Linux v5.14. BUG=b:220079865 TEST=build and verify the value of GL9763E's 0x8A4[28:19] register is 0x3FF. Change-Id: I19d4dfb7b873d09ff30ad4d2d63b876047c21601 Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Martin L Roth <martinroth@google.com>
2022-03-21payloads/tianocore: Add missing CONFIG_Sean Rhodes
Add missing CONFIG_ to the Boot Timeout parameter. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I88f4aa0286a77f6c94b5e5ec97a0034ea7594b4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62920 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-21mb/google: Remove unused cpu deviceYu-Ping Wu
The cpu device listed in MediaTek platforms' devicetree.cb doesn't actually do anything, except causing an error during device initialization: CPU: 00 missing read_resources Therefore, remove it from the devicetree. BUG=b:224419346 TEST=emerge-corsola coreboot TEST=Krabby booted up successfully BRANCH=none Change-Id: Ibf9f7cf65da6a0dd0a0e1f556d5772573ba3e930 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62805 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-21util/cbmem: Keep original Total Time calculation when no negative timestampsBora Guvendik
"Total time" calculation changed after CL 59555 to include "1st timestamp" value in the calculation. This patch restores original Total Time calculation where "1st timetamp" is subtracted from "jumping to kernel". If pre CPU reset timestamps are added (negative timestamps), "Total time" calculation still includes the pre-reset time as expected. 1) Before https://review.coreboot.org/c/coreboot/+/59555: 0:1st timestamp 225,897 1101:jumping to kernel 1,238,218 (16,316) Total Time: 1,012,281 2) After https://review.coreboot.org/c/coreboot/+/59555: 0:1st timestamp 225,897 1101:jumping to kernel 1,238,218 (16,316) Total Time: 1,238,178 3) After this patch: 0:1st timestamp 225,897 (0) 1101:jumping to kernel 1,238,218 (16,316) Total Time: 1,012,281 BUG=none TEST=Boot to OS, check cbmem -t on Redrix board Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I0442f796b03731df3b869aea32d40ed94cabdce0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-21mb/amd/chausie: add APCB binaries if availableFelix Held
The APCB files that provide the firmware components running on the PSP some mainboard-specific information like the DRAM interface configuration. Those files aren't yet in the upstream 3rdparty/blobs repository, so only add those files if they are present and print that no APCB was added and the image won't boot if they aren't present. TEST=Both cases behave as expected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1e8621901741b8b0531fe134273b47e85911e19f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-21mb/amd/chausie/chromeos.fmd: increase A/B RW section size to 4MBNikolai Vyssotski
To have enough space in the A/B RW sections, increase those sizes to 4 MByte and decrease the RO section size to 6 MByte to free up the space needed for that. Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib107fd05cfb0ef7de95425abcce6c82b88a9835d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-21ec/starlabs/merlin: Don't store EC values on changeSean Rhodes
Since CB:62741, the EC values are backed up to the CMOS when entering S3, S4 and S5. Consequently, they don't need to be stored when they're changed. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If0ea392afae4a4d3c605cdea3c5896fbff606215 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-21ec/starlabs/merlin: Always store EC valuesSean Rhodes
The EC values will be changed when entering S3, S4 or S5, so move the function that stores the current settings outside of logic that restricts it to S4 or S5. This means the state isn't lost when entering S3. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia007a8ad9c08a309489e9f64f1ed311858bfcd10 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-21amdfwtool: Check the length of matching string before accessingZheng Bao
If AB recovery is enabled and get a "Lx" in fw.cfg, wrong character is got or access violation happens. Change-Id: Ibd8ffe34fd44d860ec2115cd36117da7b02169cd Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-03-21mb/google/brya/var/banshee: Add WiFi SAR tableFrank Wu
Add WiFi SAR table BUG=b:225285426 TEST=emerge-brya chromeos-config chromeos-config-bsp-private coreboot-private-files-baseboard-brya coreboot chromeos-bootimage and checked SAR table can load by WiFi driver. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I8fa833409bd69e080fda735c89015b9548252190 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-21soc/intel/common: Add IOE P2SB for TCSSJohn Zhao
Meteor Lake has the IOE Die for TCSS. This change adds the IOE P2SB sideband access and exposes API for TCSS usage. BUG=b:213574324 TEST=Build platforms coreboot images successfully. Change-Id: I01f551b6e1f50ebdc1cef2ceee815a492030db19 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-21mb/google/zork/var/dirinboz: Add fw_config probe for ALC5682-VD & VS=
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:211672259 BRANCH=firmware-zork-13434.B TEST=ALC5682I-VS audio codec can work Change-Id: Icd4321ec0a284e35511dd4b860a16506f54cf663 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-21mb/google/zork/var/gumboz: Add fw_config probe for ALC5682-VD & VS=
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:215292608 BRANCH=firmware-zork-13434.B TEST=ALC5682I-VS audio codec can work Change-Id: I0b0231a3ee9c0dad289ffd50607b3ae6201f56a0 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-21mb/google/brya/vell: Move WWAN devices for vellRobert Chen
This was to merge PCIe ACPI code to WWAN device. Also, RTD3 devices are add to overridetree.cb where WWAN is present for vell. BUG=none BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Change-Id: If27abcf31ed948899bfaecbe8ef494fe8a80609b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-21mb/google/brya: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTORSridhar Siricilla
The patch deselects ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR Kconfig which updates PMC settings in the IFD for Alder Lake A0 silicon. As Alder Lake A0 is intermediate stepping, and the IFD is locked in the production systems, so the Kconfig is deselected. BUG=b:190588098 BRANCH=firmware-brya-14505.B TEST=Build the coreboot for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I81fe7c792dd82d9d547d318ebda55ee4a0f3ac96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-21mb/google/corsola: Revise power-on sequence of PS8640Rex-BC Chen
Although the panel initializes fine and the fw recovery screen is displayed without issues, the current power-on sequence of the PS8640 violates the spec of the PS8640, which can be confirmed by measuring it with an oscilloscope. The sequence is: - set VDD12 to be 1.2V - set VDD33 to be 3.3V - pull hign PD# - pull down RST# - delay 2ms - pull high RST# - delay more than 50ms (55ms for margin) - pull down RST# - delay more than 50ms (55ms for margin) - pull high RST# This flow will increase 110ms if firmware display is enabled in krabby. For normal booting flow, the firmware will not be enabled, so it will meet boot time requirements of Chrome OS. (Less than 1s.) Datasheet name: PS8640_DS_V1.4_20200210.docx. Chapter: 14. BUG=b:222650141 TEST=show fw display normally in krabby. TEST=result of waveform meets the spec. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7706c56dc7fc13ac84c0d52a6e534bc0988e8fd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-19mb/google/skyrim/devicetree: set PSPP policy to DXIO_PSPP_DISABLEDFelix Held
Right now, the PSPP policy that controls if the PCIe lanes can be dynamically downgraded to a lower speed to save some power needs to be disabled in order for the link training to be successful. Once this feature is working, PSPP will be reenabled. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6ea602596acb8e5ea92076386e80102c3bc757af Reviewed-on: https://review.coreboot.org/c/coreboot/+/62924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-03-19mb/amd/chausie/devicetree: set PSPP policy to DXIO_PSPP_DISABLEDFelix Held
Right now, the PSPP policy that controls if the PCIe lanes can be dynamically downgraded to a lower speed to save some power needs to be disabled in order for the link training to be successful. Once this feature is working, the PSPP policy will be switched to balanced again. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I85a06f322c4ddff25c3a858e2b79c84b36c48932 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-19soc/intel/common/block/p2sb: Add helper function to enable BARSubrata Banik
This patch creates a new helper function to enable P2SB BAR. `p2sb_dev_enable_bar()` takes the PCI P2SB device address (B/D/F) and BAR address (combining high and low base addresses). BUG=b:224325352 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ica41e8e8bdfcfe855e730b3878b874070062ef93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2022-03-19mb/google/dedede/var/lantis: Add ELAN touchscreen support for LandridRobert Chen
The touchscreen slave address for landrid is 0x10 same as lantis, so we use SSFC to switch touchscreen controller. BUG=b:222976965 TEST=emerge-dedede coreboot Change-Id: I23d3de5e45aa2876c1590a1e09679d652a3f2906 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-18mb/google/guybrush/port_descriptors: use enum values for link speedFelix Held
Use GEN3 from enum dxio_link_speed_cap instead of the number 3. TEST=Timeless build results in identical firmware image for guybrush Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0dddc57e05ec2395ca980bb63320bb9ee5242c29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-18vendorcode/intel/edk2/edk2-stable202111: Use fixed size struct elementsSubrata Banik
Fix the FSP headers and replace void pointers by fixed sized integers depending on the used mode to compile the FSP. Change request here:https://github.com/intel/FSP/issues/59 This is necessary to run on x86_64, as pointers have different size. Add preprocessor error to warn that x86_64 FSP isn't supported by the current code. BUG=b:200113959 TEST=Verified on Meteor Lake platform, without any compilation error Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I1f33db43f7932cf6d165d0c70a0e2922dad00a09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/google/brya/nivviks/overridetree: update tcss_aux_ori register nameFelix Held
Commit 215a97ee1c4cd87b266d63e32bf0b379e18fe849 (soc/intel/adl/chip.h: Convert all camel case variables to snake case) converted the camel case used in the parameter name to snake case, but commit bd529e2e200a8fbfd455dd62be0494a2b727b9a5 (mb/google/nissa/var/ nivviks: Add TcssAuxori for nivviks) still used the old names which breaks the upstream build. his patch is intended to be merged via fast-path before the 24h are over to fix the tree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2b9049553889c77bd8c59a2c4564d36d836a4eea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62927 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek/mt8186: Disable unused spm_thermalRex-BC Chen
In MT8186, we need to disable spm_thermal to prevent it from influencing other wdt status. There are two hardware pathes which are used for asserting watchdog from thermal. We can disable status of path 1 because status of path 2 is used. 1. Thermal -> SPM -> WDT 2. Thermal -> WDT Spm_thermal (path 1) is a flexible option for software control, and the hardware designer suggests that we should disable it if we don't use it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0ffde6bad3000a64e3b5782edaa72c62da034302 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62890 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Trigger wdt SW reset when wdt status is not equal to 0Rex-BC Chen
Because we close external signal in kernel driver since MT8195, it's more reasonable to trigger sw reset with exteranl signal again whenever the wdt status is not equal to 0. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic6128df7eadaebcf7ff8d4c5492e3e0cfbab6e36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62797 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/nissa/var/nivviks: Add TcssAuxori for nivviksUsha P
Enable SBU orientation handling by SoC for both USBC port0 and USBC port1. Nivviks USBC port0 do not have retimer, USBC port1 has redriver, but that do not flip the data lines. Hence we need to set bits for both the USBC ports. BRANCH:None TEST=emerge-nissa coreboot chromeos-bootimage. Flash the image on nivviks board and verified USBC display is working on both the ports in normal and inverted connections. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I219de6092ac9a9c773adbaa99f5a7d6196a2c937 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62731 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Set soc_ops.set_resources as no-opYu-Ping Wu
Without setting the set_resources field for soc_ops, we will get an error during device initialization: [ERROR] CPU_CLUSTER: 0 missing set_resources Because the set_resources field is considered mandatory, explicitly set it as no-op noop_set_resources. BUG=b:224419346 TEST=emerge-corsola coreboot TEST=Did not see the error on krabby BRANCH=none Change-Id: Ic82b86f0482a9de09e942c1674be5f0ac615851f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-18mb/google/brya/var/banshee: Replace amp max98357 with max98360Frank Wu
Based on the latest schematic, replace amp max98357 with max98360. BUG=b:224692387, b:216110896 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Id265a4276c3f8b5553a0e5d7ed824b1d9a520d44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62887 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/dedede/var/galtic: update Wifi SAR for for galnatFrank Chu
Add wifi sar for galnat/galnat360 Use SKU ID to load wifi table. Each Project and SKU ID correspond as below galtic (sku id:0x120000) galith (sku id:0x130000) galnat (sku id:0x140000)* gallop (sku id:0x150000) galtic360 (sku id:0x260000) galith360 (sku id:0x270000) galnat360 (sku id:0x2B0000)* BUG=b:222008376 TEST=emerge-dedede coreboot chromeos-bootimage \ coreboot-private-files-baseboard-dedede verify the SAR table is correct in each project Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I868a7416a002732736cabea48ce80548ea75e517 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-18commonlib/bsd: Add struct name "mem_chip_channel" for external accessXi Chen
struct mem_chip_info { ... struct { --> If no struct name, can't access the channel structure ... } channel[0]; }; BUG=b:182963902,b:177917361 TEST=Build pass on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I8dcd3b52f33f80afb7885ffdcad826d86b54b543 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-18mb/google/brya/var/volmar: Disable thunderboltRen Kuo
Volmar does not support Thunderbolt, therefore disable all of the TBT devices in the devicetree. The volmar fit image had been disabled already, cf. chrome-internal:4459289. BUG=b:2233193 TEST=Build and run on DUT. Change-Id: Ic1bba80707b1d4a97c486e22f79feccf6241865e Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/google/brya/var/kinox: Reconfigure GPIO settingsDtrain Hsu
Configure GPIOs according to updated schematics. - GPP_A21 from NC to TCP_DP1_CTRLCLK. - GPP_A22 from NC to TCP_DP1_CTRLDATA. - GPP_E22 from DDIA_DP_CTRLCLK to NC. - GPP_E23 from DDIA_DP_CTRLDATA to NC. BUG=b:214025396 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I9d2d73820fbb191b682713e4e351c6375927ddf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/intel/adlrvp: Set EPP to 45% for all Adl RVP variantsCliff Huang
This sets EPP value to be 45% for all Adl RVP variants. Historically, EPP Ratio has always been 50% (128) on Chrome platforms. But on Intel Alderlake EPP ratio of 45% is recommended for optimal power and performance on Chrome platforms. TEST= Use 'iotools rdmsr [cpu id] 0x774' command and check field 32:24 = 0x73. Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: If83a2148d596efccd2e50cc82f1afcbfb9ebb935 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-03-18mb/google/brya/var/vell: Change AMP driver settingShon Wang
1.Change I2S GPP_Sx (S0-S3) Native PAD Configuration from NF2 to NF4 2.Select CS35l53 AMP driver for Vell variant. Change-Id: I96d49bd1a2ba061c4fd52b450b31d0885f49552c Signed-off-by: Shon.Wang <shon.wang@quanta.corp-partner.google.com> Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18drivers/i2c/cs35l53: Add driver for generating device in SSDTStefan Binding
This patch is adding support for Cirrus Logic CS35l41/CS35l53 smart amplifier. This part is now used in number of new chromebook's HW designs by several vendors. This driver uses the ACPI Device Property interface to generate the required parameters into the _DSD table format expected by the kernel. For detailed information about these properties, please check Linux kernel documentation: /Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml Change-Id: I2cbb1cef89f8d56ee73fab06c68933a2ab8c3606 Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18mb/google/skyrim: Build APCB sources into amdfw when presentKarthikeyan Ramasubramanian
BUG=b:224618411 TEST=util/abuild/abuild -t GOOGLE_SKYRIM with and without APCB Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I71b30a5716f2e0d60d07a0ec29f98609c1f2a8b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-18mb/google/skyrim: Fix I2C voltagesRaul E Rangel
Needed so i2c communication works. BUG=b:224618411 TEST=build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8ec7c18cae509b5683cb73153fd6d3747cf9d753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62874 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18mb/google/skyrim: Enable tis_plat_irq_statusRaul E Rangel
This will fix: > [INFO ] Probing TPM I2C: tis_plat_irq_status() not implemented, wasting 20ms to wait on Cr50! BUG=b:224618411 TEST=Compile skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5add694506ad089adcc8961f101bf507bc39a522 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62873 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18Revert "Revert "drivers/intel/fsp2_0: Allow `mp_startup_all_cpus()` to run ↵Nick Vaccaro
serially"" This reverts a change that was causing hangs and exceptions during boot on an ADL brya4es. The hang (or APIC exception) occurs at what appears to be the FSP MP initialization sequence, prior to the "Display FSP Version Info HOB" log being displayed : [DEBUG] Detected 10 core, 12 thread CPU. [DEBUG] Display FSP Version Info HOB This reverts commit 40ca79714ad7d5f2aa201d83db4d97f21260d924. BUG=b:224873032 TEST=`emerge-brya coreboot chromeos-bootimage`, flash and verify brya4es is able to successfully reboot 200 times without any issues. Change-Id: I88c15a51c5d27fbd243478c923e75962d3f8d67d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-18soc/intel/common/block/cse: Change loglevel prefix to WARNINGWisley Chen
This message is not really an error message, so BIOS_ERR is inappropriate. The message does seem more like a warning though, that the developer could have multiple Kconfigs selected to send EOP, therefore switch to BIOS_WARN instead. BRANCH=firmware-brya-14505.B TEST=build Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I57a34334007a6a7443302c2f25de3d5c87c85573 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-17docs/contributing/gsoc: Add reference to easy projectsFelix Singer
Change-Id: I22e4a7c6385ffb9ba77e10edad41ef3d027ba694 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62906 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17Documentation/contributing/projects: Add "easy projects" sectionFelix Singer
Change-Id: Ibf91a879478e03b584756dc24fe33fb013803f9d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-03-17soc/intel/adl: Remove IOM Mctp command from TCSS ASLMAULIK V VAGHELA
TCSS ASL code was carried forward from TGL and it used to follow the same sequence. Recently as part of s0ix hang issue, it was found that sending IOM MCTP command as part of TCSS D3 Cold enter-exit sequence created an issue. We discovered that due to change in hardware sequence, ADL should not set/reset IOM MCTP during D3 cold entry or exit. This patch removes the bit setting from ASL file to prevent hang in the system. This patch also removes obsolete Pcode mailbox communication which is no longer required for ADL. BUG=b:220796339 BRANCH=firmware-brya-14505.B TEST=Check if hang issue is resolved with the CL and no other regression observed Change-Id: I2f066bcc4a8f475a15ddd12ef5ed87d7298312bb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62861 Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17util/liveiso: Remove coreboot toolchain from todoFelix Singer
The coreboot toolchain is a huge blob and increases the size of the build a lot. If needed, the specific toolchain can be added before building the ISO or with `nix-shell` later in the live system, as shown below. $ nix-shell -p coreboot-toolchain.i386 Thus, remove this from the todo list. Change-Id: Ia24ceb84f202828f1c97d3ba5bafbf6af0361bdb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-03-17soc/amd/cezanne: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I254e26080319478b1b5b1f5c353a7966cfac63b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-17soc/amd/picasso: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I14903980fd921cad24c39cadd533349c14cc1cd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-17soc/amd/sabrina: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I8d4f5b1124d4017b04bcaf7044216fd696dce63d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-17mb/google/brya: Remove mainboard.aslEric Lai
Use C code to generate MS0X entry and provide variant hook. BUG=b:207144468 TEST=check SSDT table has the same entry. Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) { \_SB.PCI0.CTXS (0x148) } Else { \_SB.PCI0.STXS (0x148) } } } Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ic36543e5cbaf8aaa7d933dcf54badc5f40e8ef02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17mb/google/brya: Remove Pcie Generic driver for WWANCliff Huang
This was to merge PCIe ACPI code to WWAN device. But, now use recent _DSD generation changes in FM driver instead. PCie generic driver is not used for WWAN at this time. Also, RTD3 devices are moved to overridetree.cb where WWAN is present. BUG=b:221250331 BRANCH=firmware-brya-14505.B TEST= Check that _DSD is added to WWAN device in SSDT for the variants. Check that RTD3 is added to WWAN device in SSDT for the variants. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia343c7545cf30bdbcd1de19e5eb84049dbb2977f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17mb/google/brya/var/banshee: Update DPTF parametersFrank Wu
Follow thermal team design to update thermal table. BUG=b:223492897 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I5da776e7ae3368ce00cd29ec0ccdb5b7a725ff88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-17mb/google/dedede/var/galtic: Add fw_config probe for 2nd touchscreenFrank Chu
For galnat platform, support 2nd ELAN touchscreen via SSFC. Define FW_CONFIG bits 39 - 40 (SSFC bits 7-8) for touchscreen controller switch. BUG=b:221002826 TEST=touch screen is functional. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Id3501205b147c9dc3c96ce8381a3e7492ae8258e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-17drivers/wifi/generic: Fix properties in generic-under-PCI device caseTim Wawrzynczak
In the devicetree case where a generic device underneath the Intel PCI CNVi device carries the device properties, the incorrect device was passed to wifi_ssdt_write_properties. Also while here, update the UUID for `DmaProperty` to match what Microsoft defined here: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports BUG=b:215424986, b:220639445 TEST=dump SSDT and see that _PRW for CNVi device is no longer garbage, but contains the value from the devicetree (GPE0_PME_B0). Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iafd86458d2f65ccb7e74d1308d37fd3ebbf7f520 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
2022-03-17driver/intel/usb4/retimer: Change loglevel prefixWisley Chen
In usb4_retimer_fill_ssdt(), it search all dpf ports and shows message in not support dpf ports. It's not error and changes the loglevel prefix to BIOS_INFO. BUG=b:222038287 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I508ec7662e078893f944edb3d68364c57d5c5a73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17soc/intel/alderlake/retimer: Change loglevel prefixWisley Chen
This message is not really an error message, so BIOS_ERR is inappropriate. Since the message is informational, switch to BIOS_INFO instead. BUG=b:222038287 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I9dc852a0cd30f95506c205f161a05e8a8c44fcd5 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17ec/google/chromeec: Change loglevel prefixWisley Chen
In most boards, it doesn't write OEM_NAME in CBI to override the manufacturer name in the SMBIOS table. It' better use the "BIOS_INFO" than "BIOS_ERR" BUG=b:222038287 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I52eb1e6926eaac30b1dbee13ab750ef15b466d89 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17mb/google/brya/var/kinox: Modify 15W SOC power control settingDtrain Hsu
Modify 15W SOC default power settings for kinox. - PL2 39W - PL4 100W - Psys_PL2 65W - Psys_imax_ma 5000ma - bj_volts_mv 20000mv BUG=b:213417026, b:222599762 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I2956705f7d26929c7cf2dd4e852fc61b619a83e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62627 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17soc/intel/common/block/p2sb: Refactor P2SB to add comprehend future SoCSubrata Banik
This patch refactors the current P2SB common code driver to accommodate the future SoC platform with provision of more than one P2SB IP in disaggregated die architecture. IA SoC has only one P2SB in PCH die between SKL to ADL. Starting with MTL, one more P2SB IP resides in IOE die along with SoC die. (PCH die is renamed as SoC in MTL.) P2SB library (p2sblib.c) is common between PCH/SoC and IOE, and p2sb.c is added only for PCH/SoC P2SB. BUG=b:224325352 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib671d9acbfdc61305ebb401499bfc4742b738ffb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-17mb/google/brask/variants/moli: set eMMC pin in bootblockRaihow Shi
1.Assert eMMC enable pin in bootblock 2.Deassert eMMC reset pin in bootblock BUG=b:220821454 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I924fcdadaae8ed29b50369a55bad00983cf6ba19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17qualcomm/sc7280: Add mdp clock support to turbo in corebootTaniya Das
This change supports the configuration and enablement of mdp clock to vote for turbo and supports different display panel resolutions and framerates. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ibf4f11d02b0edf83461dbb7af99fda5f33cd5b71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62371 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17qualcomm/sc7280: Add display external clock support in corebootTaniya Das
Add support for EDP (Embedded DisplayPort) clocks in coreboot. This change supports the configuration and enablement of EDP PIXEL, LINK, LINK_INTF and AUX clocks. BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ia6872ede515401e95ea2dadc9766e3e70fb66144 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59611 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17mb/google/nissa/var/nivviks: Set gpio override to board_0Eric Lai
Follow the latest schematic change, gpio will match the baseboard. Return the current table as override. BUG=b:223677877 TEST=audio is functional on board_0. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I91dc2c9c8811d403c60a4b4f3a7c5ed8de4e527e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-03-17ec/chromeec/ec_smbios: Set system manufacturer for ChromeOS devicesMatt DeVillier
Currently, many Linux drivers use DMI quirks to identify ChromeOS devices and handle them accordingly: namely they look for the SMBIOS system manufactuer to be "GOOGLE" or "Google", and the bios-vendor to be coreboot. Historically this was consistently the case, but recent model ChromeOS devices allow the OEM to set the mainboard manufacturer, which is also the default system manufacturer. This breaks many DMI quirks, notably ones used by SOF (sound open firmware) for audio. To fix this, set the system manufactuer for ChromeOS devices to "Google" for devices selecting CONFIG_EC_GOOGLE_CHROMEEC_SKUID, leaving the OEM customization in place for the mainboard manufacturer. Since boards selecting CONFIG_EC_GOOGLE_CHROMEEC_SKUID are the only ones overriding the default mainboard manufacturer, they are the only ones which need this correction. Test: build/boot google/bloog with Linux 5.16, verify SOF drivers correctly detect device as a Chromebook and load the appropriate audio firmware. Change-Id: I9de17fa12689ab4e627b995818aa3d2653102b04 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62796 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17soc/intel/alderlake: Update ADL-P id list of th VccIn Aux Imon IccMax valuesCurtis Chen
Add ADL-P MCH ID 4, 8, 9, 10 into this list. BUG=b:222038287 BRANCH=firmware-brya-14505.B TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I2cee31ba56e0b142c50a745c453968635e86296e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17soc/intel/common/block/cpu: Enable ROM caching in ramstageSubrata Banik
Cache the BIOS region and extended BIOS region if the boot device is memory mapped, which is mostly the case with Intel SoC platform. Having the ROM region cached helped to improve the pre-boot time. TEST=Able to boot redrix to Chrome OS without seeing any sluggishness. Additionally verified on EHL board (from siemens), shows significant savings in payload loading time as below: Here is the timestamp snippet showing the payload load time as a comparison between current upstream and the patched version: upstream: 90:starting to load payload 1,072,459 (1,802) 958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619) with this patch: 90:starting to load payload 1,072,663 (2,627) 958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I02b80eefbb3b19331698a205251a0c4d17be534c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-17soc/intel/common/fast_spi: support caching `ext_bios` in ramstageSubrata Banik
This patch provides a way to cache `ext_bios` region for all stages to save boot time. TEST=Able to see the ext_bios region in MTRR snapshot when cached on the Brya variants. Here is the timestamp snippet showing the payload load time as a comparison between current upstream and the patched version: upstream: 90:starting to load payload 1,072,459 (1,802) 958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619) with this patch: 90:starting to load payload 1,072,663 (2,627) 958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I87139a9ed7eb9ed43164a5199aa436dd1219145c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-17include/efi: Clean up efi_datatype.h fileSubrata Banik
This patch cleans up `efi_datatype.h` to allow other SoC and/or driver code to use this file. `PiPei.h` file only gets added from UDK2017 hence, the platform with the older EDK2 base (prior to UDK2017) is unable to resolve this file dependency. This CL removed the `PiPei.h` header and only added the required header file `PiPeiCis.h` for platforms with UDK base >= 2017. BUG=b:200113959 TEST=Able to build Brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie9177814fcf41e5950ace94050356f0273f765c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17drivers/wifi/generic: Fix is_cnvi functionEric Lai
dev->ops = &wifi_cnvi_ops need is_cnvi be true. This cause the exclusive statement so is_cnvi never be true in !DEVTREE_EARLY. BUG=b:224317408 TEST=no assertion in coreboot. [EMERG] ASSERTION ERROR: file 'src/acpi/acpigen_pci.c', line 24 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I1ca6312ce164c43021686b483f6579164614cede Reviewed-on: https://review.coreboot.org/c/coreboot/+/62784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/qualcomm/common: Add dram information to CBMEM tableRavi Kumar Bokka
BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I0f1dd05ee224bf8284661c0afaa01d0a9d71daa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-03-16mb/hp/snb_ivb_laptops: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is in one place and not distributed over two files. Change-Id: I500f6422c1f8975de8b0bcc8b95cba2bcd4ebe27 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/google/brya/var/kinox: Enable PCIe-eMMC bridgeDtrain Hsu
Enable PCIe-eMMC bridge for Kinox. BUG=b:218786363, b:211176722 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iec34708e5879c47f5339c48fd996eb6d7ef0ee86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16mb/google/brya/var/kinox: Modify the DPTF/Fan parametersDtrain Hsu
Follow the Thermal_paramters_list-0314.xlsx to modify DPTF/Fan parameters. BUG=b:221180425, b:222020226, b:221182596 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I5f44120430029130d38b89d0eab6bbf205aca929 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/intel/common: Retry MEI CSE DISABLE commandSridhar Siricilla
As per ME BWG, the patch retries MEI CSE DISABLE command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. TEST=build and boot the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Id38a172d670a0cd44643744f27b85ca7e368ccdb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/intel/common: Retry END_OF_POST commandSridhar Siricilla
As per ME BWG, the patch retries END_OF_POST command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. BUG=b:200251277 TEST=Verify EOP retry mechanism for brya board. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ieaec4d5564e3d962c1cc866351e9e7eaa8e58683 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-163rdparty/amd_blobs: advance submodule pointerJason Glenesk
This adds the following commits: * a069321 cezanne: Update SMU firmware to 64.62.0 * d8a51cb cezanne: Upgrade ABL to 0x22146070 Change-Id: I066252eda56b8b62db420cbcfc95c97875a3b6d1 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-16soc/mediatek: PCI: Remove global variableJianjun Wang
Remove global variable and use 'pcidev_path_on_root()' to get the base address of PCIe controller. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/mediatek: Add chip config for setting PCIe configJianjun Wang
Add chip config for setting PCIe config. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/amd/common/block: Add mainboard_handle_smiRaul E Rangel
The current SMM framework only allows the mainboard code to handle GPEs. i.e., Events 0 - 23. This change allows the mainboard code to handle any SMI events not handled by the SoC code. This will allow the mainboard code to handle `SMITYPE_ESPI_SMI`. BUG=b:222694093 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I81943e8cb31e998f29cc60b565d3ca0a8dfe9cb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-16mb/hp/snb_ivb_laptops: Rename `BOARD_HP_SNB_IVB_LAPTOPS`Felix Singer
Rename `BOARD_HP_SNB_IVB_LAPTOPS` to `BOARD_HP_SNB_IVB_LAPTOPS_COMMON` to indicate and to make it clear that this option serves as base for others. Built HP EliteBook Revolve 810 G1 with BUILD_TIMELESS=1 and also with `INCLUDE_CONFIG_FILE` disabled. coreboot.rom remains identical. Change-Id: Icadeb8a33ae0787d2cd5da460065a2ed15256d64 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/hp/snb_ivb_laptops/Kconfig{,.name}: Reorder selects alphabeticallyFelix Singer
Built HP EliteBook Revolve 810 G1 with BUILD_TIMELESS=1 and coreboot.rom remains identical. Change-Id: I54367c7c663ad288ccdcbd4e7289546489a68f30 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-16mb/google/brya: set GPP_D0 to GPOMark Hsieh
Based on the schematic carbine_adl-p_dvt_20211104.pdf, the GPP_D0 is directly connected to FP module, Set GPP_D0 to GPO, DUT can flash FP firmware successfully. BUG=b:222188263, b:223906569 TEST=USE="project_gimble emerge-brya coreboot" and run the Fingerprint Firmware Test. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I164ffff6bd3b4058d6e28247eb7c3ed46d3891b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-16libpayload: Parse DDR Information using coreboot tablesRavi Kumar Bokka
BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ieca7e9fc0e1a018fcb2e9315aebee088edac858e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59193 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15util/ifdtool: Add Meteor Lake platform support under IFDv2Subrata Banik
BUG=b:224325352 TEST=Able to build ifdtool. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3564efa27d0271286435284e745458aada987008 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-15soc/intel/tgl: move DIMM_SPD_SIZE from mb to SoC KconfigMichael Niewöhner
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to 512 in the SoC Kconfig and drop it from the mainboard Kconfigs. Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15intel/common/block: Add APL and GLK PCI IDs for HDASean Rhodes
Add PCI ID's for APL/GLK so they can use HDA. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I37df388a93ffc06e716085a58d0d00ed5c6fa9e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-15mb/google/guybrush/var/nipperkin: update APU STT settingKevin Chiu
BUG=b:219616787 BRANCH=guybrush TEST=emerge-guybrush coreboot update the thermal setting value by measurement and pass the thermal performance test Change-Id: I3ba3ab990d5362c6f02d2ee5a023f4c5cca7fa45 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-15mb/google/brya/var/banshee: Add camera privacy settingFrank Wu
Using the GPP_F19 as privacy switch for camera in banshee. BUG=b:223712143, b:216110896 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I67d65347ceac7152f1951018a633a2e93ee84e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-15lib/spd: Do not print part number if it is not availableWerner Zeh
If the DRAM part number is not available in the SPD data (meaning filled with 0x00) do not print it in the log. Change-Id: If7224c6e114731b1c03915a2bde80f57369d0cee Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-15soc/mediatek/mt8186: change pmic hwcid from warning to infoRex-BC Chen
The pmic hwcid dumping should not be a warning, so we modify it to info. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15soc/mediatek/common: Add halt() after triggering wdt resetRex-BC Chen
It's more reasonable to halt when we trigger watchdog reset because the whole system should be reset afterwards. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15mb/google/brya: Disable C1-state auto demotion for Brya & BraskMAULIK V VAGHELA
C1-state auto demotion feature allows hardware to determine C1-state as per platform policy. Since Brya sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. Also, disabling this feature results in 110 mW power savings during video playback. Note that C1state Autodemotion feature is not applicable for ADL-P SoC. Hence recommendation is to keep it disabled. BUG=b:221876248 BRANCH=firmware-brya-14505.B TEST=Code compiles and correct value of c1-state auto demotion is passed to FSP. Also power and performance impact has been measure by respective teams. Change-Id: I41eea916cdfe4a86e4d263e3191f5cb40fa33a90 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 22:02:44 +0000