Age | Commit message (Expand) | Author |
2015-04-10 | tegra132: Add panel mode spec | Jimmy Zhang |
2015-04-10 | google/rush_ryu: dsi: Enable panel related vdd and clocks | Jimmy Zhang |
2015-04-10 | google/rush_ryu: Disable EC SW sync for proto boards before proto3 | Furquan Shaikh |
2015-04-10 | tegra132: Increase space for romstage in memlayout | Furquan Shaikh |
2015-04-10 | urara: support building with CHROMEOS enabled | Vadim Bendebury |
2015-04-10 | baytrail: correct NC pin to GPO pin according to BYT platform design guide | Kane Chen |
2015-04-10 | samus: Log EC panics to eventlog | Shawn Nematbakhsh |
2015-04-10 | cros_ec: Retry failed VBNV transactions | Julius Werner |
2015-04-10 | samus: Enable vr_slow_ramp | Shawn Nematbakhsh |
2015-04-10 | x86: Support reset routines in bootblock | Lee Leahy |
2015-04-10 | broadwell: Correct XHCI offset for USB 3.0 ports | Julius Werner |
2015-04-10 | broadwell: Set PCIe replay timeout to 0xD | Duncan Laurie |
2015-04-10 | samus: Use codec internal 1.8V as DACREF source | Ben Zhang |
2015-04-10 | samus: Set MICBIAS1 to 2.970V | Ben Zhang |
2015-04-10 | baytrail: add code for supporting 2x ddr refresh rate | Kane Chen |
2015-04-10 | broadwell: Add configuration for tuning VR for C-state operations | Duncan Laurie |
2015-04-10 | samus: Adjust SATA Gen3 TX voltage amplitude | Duncan Laurie |
2015-04-10 | broadwell: Preserve VbNv around cmos_init | Duncan Laurie |
2015-04-10 | broadwell: Add function to apply PRR to a range of SPI flash | Duncan Laurie |
2015-04-10 | samus: Add clear_recovery_mode_switch function | Duncan Laurie |
2015-04-10 | samus: Set current backlight PWM value | Duncan Laurie |
2015-04-10 | broadwell: Turn off panel backlight in S5 SMI handler | Duncan Laurie |
2015-04-10 | broadwell: Skip steps when disabling PCIe port | Duncan Laurie |
2015-04-10 | broadwell: Remove XHCI workarounds on WPT | Duncan Laurie |
2015-04-10 | broadwell: Only do pre-graphics delay when running option rom | Duncan Laurie |
2015-04-10 | PCI - Add interrupt disable bit definition | Lee Leahy |
2015-04-10 | samus: Add ACPI binding for rt5677 codec SPI | Ben Zhang |
2015-04-10 | broadwell: Fix PCIe ports programming sequences to enable HSIOPC | Wenkai Du |
2015-04-10 | samus: Add RT5677 ACPI/DT bindings with _DSD | Duncan Laurie |
2015-04-10 | broadwell: Update SATA Gen3 TX adjustment registers | Duncan Laurie |
2015-04-10 | broadwell: Add a few bits to finalize step | Duncan Laurie |
2015-04-10 | baytrail: fix the coding error on PCIe L1 exit latency | Kevin L Lee |
2015-04-10 | TPM: Reduce buffer size to fix stack overflow | Julius Werner |
2015-04-10 | Baytrail: Prior to PCI scan, wait for LCTL to be active in 50 ms | Kevin Hsieh |
2015-04-10 | tpm: Remove error message for unknown resource type | Duncan Laurie |
2015-04-10 | Broadwell: Set boot_mode of pei_data before running reference code | Kenji Chen |
2015-04-10 | samus: Move board version to a separate file | Duncan Laurie |
2015-04-10 | tpm: Add ramstage driver and interrupt configuration | Duncan Laurie |
2015-04-10 | tpm: Move the LPC TPM driver to a subdirectory | Duncan Laurie |
2015-04-10 | broadwell: Increase I2C SDA hold timing to 300ns | Chiranjeevi Rapolu |
2015-04-10 | broadwell: add RCBA posting read after writing | Wenkai Du |
2015-04-10 | Broadwell: Synchronization with FRC for Root Port Power Management | Kenji Chen |
2015-04-10 | broadwell: Skip DDI-A enable in S3 resume | Duncan Laurie |
2015-04-10 | broadwell: Add support for ACPI \_GPE._SWS | Duncan Laurie |
2015-04-10 | baytrail: Switch from ACPI mode to PCI mode for legacy support | Marc Jones |
2015-04-10 | southbridge/intel/fsp_rangeley/ : Spellcheck + Formatting | nicky sielicki |
2015-04-10 | vboot: Remove unused 2lib header path | Randall Spangler |
2015-04-10 | vboot: Include vb2_api.h, instead of lower-level vboot2 header files | Randall Spangler |
2015-04-10 | vboot2: Reduce minimum required work buffer size | Julius Werner |
2015-04-10 | vboot: add physical recovery switch support | Daisuke Nojiri |
2015-04-10 | vboot2: update fw_version_tpm when creating vboot1 shared data | Daisuke Nojiri |
2015-04-10 | ramoops: Add support for passing ramoops region through cb tables. | Furquan Shaikh |
2015-04-10 | chromeos: Add correct dependency on HAVE_ACPI_TABLES for gvns and ramoops. | Furquan Shaikh |
2015-04-10 | vboot: reduce references to parent's files in Makefiles | Daisuke Nojiri |
2015-04-10 | vboot: fix invalid check for the returned value from spi_flash->write | Daisuke Nojiri |
2015-04-10 | cbtables: Add RAM config information | David Hendricks |
2015-04-10 | vboot: adding VBSD_BOOT_FIRMWARE_WP_ENABLED logic | Gediminas Ramanauskas |
2015-04-10 | fmap: use CBFS for all other than x86 platforms | Vadim Bendebury |
2015-04-10 | chromeos: Add a function to copy VPD WiFi calibration data to CBMEM | Vadim Bendebury |
2015-04-10 | vboot: move vboot files to designated directory | Daisuke Nojiri |
2015-04-10 | build system: Fix SeaBIOS integration with multilib compilers | Patrick Georgi |
2015-04-10 | mainboard/biostar: Add support for Biostar AM1ML ver7.x | Sergej Ivanov |
2015-04-10 | vendorcode/amd/agesa/f16kb: Enable support for AM1 socket | Sergej Ivanov |
2015-04-10 | southbridge/amd/agesa/hudson: Fix LPC_DEV definition | Sergej Ivanov |
2015-04-10 | google/cosmos: don't enable CHROMEOS by default | Patrick Georgi |
2015-04-10 | util/bimgtool: Add verification mode | Vadim Bendebury |
2015-04-10 | ipq806x: Remove extra INCLUDES | Patrick Georgi |
2015-04-10 | google/rush: Add I2C1 init and audio clock enable/resets | Tom Warren |
2015-04-10 | tegra132: Add routine to enable all audio periphs under AHUB | Tom Warren |
2015-04-10 | tegra132: Add I2C1 support to funit | Tom Warren |
2015-04-10 | google/rush_ryu: Add support for event log | Furquan Shaikh |
2015-04-10 | rtc: Add an RTC driver for the TI TPS65913 PMIC. | Furquan Shaikh |
2015-04-10 | elog: Hide elog_flash_offset_to_address() from SMM | Furquan Shaikh |
2015-04-10 | elog: Fix typecast issues related to 64-bit compilation. | Furquan Shaikh |
2015-04-10 | arm64: Implement PSCI command support | Aaron Durbin |
2015-04-10 | arm64: secmon: add entry point for turned on CPUs | Aaron Durbin |
2015-04-10 | ryu: Add display_start api | Jimmy Zhang |
2015-04-10 | ryu: Enhance pmic access functions | Jimmy Zhang |
2015-04-10 | ryu: audio: Enable RT5677 audio codec | Tom Warren |
2015-04-10 | ryu: Select pwr btn polarity based on board id | Furquan Shaikh |
2015-04-10 | util/bimgtool: Use CRC 16 instead of CRC x25. | Ionela Voinescu |
2015-04-10 | gpio: compile gpio.c at all stages | David Hendricks |
2015-04-10 | marvell/bg4cd: add gpio.h to fix broken build | Daisuke Nojiri |
2015-04-10 | gpio: decouple tristate gpio support from board ID | David Hendricks |
2015-04-10 | gpio: add a function to read GPIO array as base-2 value | David Hendricks |
2015-04-10 | gpio: cosmetic changes to tristate_gpios.c | David Hendricks |
2015-04-10 | rk3288: Adjust CBFS header and ROM offsets | Julius Werner |
2015-04-10 | rk3288: don't log LAST_TSHUT bit | huang lin |
2015-04-10 | rk3288: slowly raise to max cpu voltage to prevent overshoot | huang lin |
2015-04-10 | ryu: update board id definitions | Aaron Durbin |
2015-04-10 | ryu: remove board id normalization | Aaron Durbin |
2015-04-10 | tpm: allow 0 as valid i2c bus number | Daisuke Nojiri |
2015-04-10 | google/storm: Minor board ID changes | Dan Ehrenberg |
2015-04-10 | chromeos: add another VPD access API | Vadim Bendebury |
2015-04-10 | storm: Initialize clock, pinmux for NAND if present on board | Dan Ehrenberg |
2015-04-10 | gpio: Remove non-ternary tristate mode, make ternaries easier | Julius Werner |
2015-04-10 | gpio: Extend common GPIO header, simplify function names | Julius Werner |
2015-04-10 | storm: retrieve MAC address from VPD | Vadim Bendebury |
2015-04-10 | chromeos: move VPD MAC address retrieval function | Vadim Bendebury |
2015-04-10 | arm64: secmon: pass online CPUs to secmon | Aaron Durbin |