| Age | Commit message (Collapse) | Author |
|---|
|
`di` points to a single item in xhci->dev[], which is malloc'd
collectively. Trying to free() leads to pain.
Change-Id: Ibd99eda905d43cbf2d2c111dfd0186ed6b119329
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8515
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Our Mediawiki instance doesn't accept the old txt format anymore.
Change-Id: I94b9f5366900ec8e192abab3ed716dbced4fc4f7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change just adds a check to verify that the build is happening
inside a git repo and that git is a valid command before trying
to update the submodules.
Use 'command -v' instead of 'which' to stay portable.
Change-Id: Idfa27645c3dbfd684f90002ecb01626d71eacc8f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
To align with arm use the RAMSTAGE_BASE Kconfig option
for start of ramstage. Also, use 16-byte alignment for the
start and end of the sections. 4 bytes were previously used, but
it definitely seems more appropriate to at least have the heap
handing out 16-byte aligned pointers.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and booted through attempting to load payload
Original-Change-Id: I39329055696ae21a9ed1d9a64769981ab4dcdddd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207432
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6291f3bed705154743be78a881a26dfc9d041c5e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic280b4c6435c4f8e0e783fe5bd4694832ce9b550
Reviewed-on: http://review.coreboot.org/8588
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Inconsistent progress was observed running ramstage.
It was determined that the hand-coded assembly functions
were causing issues. Some of the comments seems suspect about
the hardware taking care of alignment. The prudent thing to do
is to use the C ones. Optimization can come later after maturity.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and booted to attempting to payload
Original-Change-Id: I4137adf9b36b638ed207e4efd57adaac64c6a6c1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207431
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 2762e478c6b59dd30c59aa87a922d0f78c00c0c4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3196b0c2bf41a21db31f999ba437d118875a236
Reviewed-on: http://review.coreboot.org/8587
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Ramstage needs an assembly entry point for setting up
the initial state of the CPU. Therefore, a function is
provided, arm64_el3_startup(), that bootstraps the state
of the processor, initializes the stack pointer, and
branches to a defined entry symbol. To make this work
without adding too much preprocessor macro conditions
provide _stack and _estack for all the stages.
Currently the entry point after initialization is 'main',
however it can be changed/extended to do more work such
as seeding the stack contents with tombstones, etc.
It should be noted that romstage and bootblock weren't
tested. Only ramstage is known to work.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Brought up 64-bit ramstage on rush.
Original-Change-Id: I1f07d5b6656e13e6667b038cdc1f4be8843d1960
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207262
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 7850ee3a7bf48c05f2e64147edb92161f8308f19)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia87697f49638c8c249215d441d95f1ec621e0949
Reviewed-on: http://review.coreboot.org/8585
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The driver structures live in special sections which have no
direct reference to the symbols. Therefore, when garbage
collecting sections in the linker the drivers are tossed out
resulting in no drivers being linked into ramstage. Fix this
by adding the KEEP() directive to those special sections.
BUG=chrome-os-partner:29923
BRANCH=None
TEST=Built and noted console starts working in ramstage.
Original-Change-Id: Iaa0fd428bf975c82d4e6b0e75a17e6fd231fbaa9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207261
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 7c1a3e63e398755de0c77524a0483e6f1019aac0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e30e73be754ec849cb3cfac3bcb12e95b0f60d4
Reviewed-on: http://review.coreboot.org/8584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
1) In order to avoid stack from overflowing during ramstage decompression,
initialize stack right at the beginning of romstage.
2) Declare different Kconfig options for stack at each stage.
3) Provide a macro that does stack seeding if required and calls appropriate
function.
BUG=None
BRANCH=None
TEST=Compiles and runs successfully on rush.
Original-Change-Id: I55d6ce59ea91affba3e86d68406921497c83fb52
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206880
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5e32d73803a2a9d222fcc4ca5f58efd3abe95d34)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib833a1badb170a33cbf20d232019425b59db60cd
Reviewed-on: http://review.coreboot.org/8583
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Still waiting on VDD_CPU value, etc. from board guys, but this is a start.
BUG=None
BRANCH=None
TEST=Built and flashed rush, saw 'PMIC init done' string OK.
Original-Change-Id: I6f8b16c4ebf1e9c159f8175d59262119ef0e498f
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206412
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 96a9ff8f632c2b9bf3f81f5b8fc4f3b6784a02bc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9d3d7ff55f2d6ca88ebdcc8ad1d7de135f5136d2
Reviewed-on: http://review.coreboot.org/8582
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Once the MTS microcode is loaded the core complex can be
directed to decode the MTS and start running. The cores,
however, won't start executing until instructed to do so.
BUG=chrome-os-partner:29222
BRANCH=None
TEST=Built, booted, ran. Noted it took about 920ms for the
core complex to decode and handshake back.
Original-Change-Id: I0a9ed53e596eb65801461b2769d133710a92a48a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206075
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit 6edb6e21a69d84ba5b23137e9e390954159e7887)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I179e561bb3a34b206620eecde6781a1c05a3744e
Reviewed-on: http://review.coreboot.org/8581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1) Add check for zero size in memrange.
2) Add public memrange_init_empty function to allow initializing only the
memrange structure without filling in device resources
BUG=None
BRANCH=None
TEST=Compiles and runs succesfully for rush MMU memranges.
Original-Change-Id: I8e4d864cbc9a770cd208f8a9f83f509dc7ace894
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208957
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5c42301c2a51a1a2a29ef58012f210d03bd37f94)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8d63abb15efda74270ef6fa3c0df55c05659595d
Reviewed-on: http://review.coreboot.org/8597
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
cbfstool has diverged between coreboot upstream and the chromium tree.
Bring in some of the chromium changes, in particular the useful remainders
of cbf37fe (https://chromium-review.googlesource.com/176710)
- fix coding style
- mark unused variables explicitly unused
- remove some dead code
Change-Id: I354aaede8ce425ebe99d4c60c232feea62bf8a11
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/8577
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The armv8 cores need to have microcode loaded before they can
be taken out of reset. Locate and load the MTS microcode at the
fixed address of 0x82000000. The ccplex, once enabled, will
decode and transfer the microcode to the carveout region.
BUG=chrome-os-partner:29922
BRANCH=None
TEST=Built and ran. Confirmed dump of MTS region after loading code.
Original-Change-Id: Ie5ab72e5363cbdb251d169356f718020d375fce6
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206290
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6726d8862c08b155b9218aa5e2e39428a105089e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I425c2e2fd1eaec49d81bef1ff4bf4f36da9296df
Reviewed-on: http://review.coreboot.org/8580
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As a convenience, print the actual stage name when entering a stage.
Also unify the banner between bootblock / romstage and ramstage. No
reason for two different occurences.
Instead of this:
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 booting...
you will see this:
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 bootblock starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 romstage starting...
[..]
coreboot-4.0 Tue May 13 14:13:37 PDT 2014 ramstage starting...
Roughly based on: https://chromium-review.googlesource.com/199671
Change-Id: Id5894535e0551d113c80e4ff0514287391be1bef
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8578
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The recommended settings for the size of the MTS region is 128MiB.
Therefore, provide this region 128MiB below the top of DRAM for
each configuration.
BUG=chrome-os-partner:29922
BRANCH=None
TEST=Built and noted MTS carveout region at expected location.
Original-Change-Id: Iac17f210dfef8e8a36617c7b3dceba8c2134ee9b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206291
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit f1758c74330afe9dd7eaa8ff1fef5e4d18ed14ad)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I369a3897e31f3126d031d3582f52f9892350f658
Reviewed-on: http://review.coreboot.org/8579
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Use the Kconfig value to load the name of the stage instead of the
hard-coded fallback stage.
(cherry picked from commit de4310af6f6dbeedd7432683d1d1fe12ce48f46e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1ac707efe38e29f109dbbe206de74fbfe7cb7b0b
Reviewed-on: http://review.coreboot.org/8576
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
There's no reason to duplicate code in the mainboards. Therefore,
drive the flow of romstage boot in the SoC. This allows for
easier scaling with multiple devices.
BUG=None
BRANCH=None
TEST=Built and booted to same place as before.
Original-Change-Id: I0d4df84034b19353daad0da1f722b820596c4f55
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205992
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit de4310af6f6dbeedd7432683d1d1fe12ce48f46e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie74f0eb1c983aff92d3cbafb7fe7d9d7cb65ae19
Reviewed-on: http://review.coreboot.org/8575
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Add support for initializing dram within romstage. This is an essential before we
move to the armv8 core.
BUG=None
BRANCH=None
TEST=Compiles succesfully for rush. Tried writing to and reading value from the
base of sdram and it worked fine. Also tested with primitive_memtest CL:
https://chromium-review.googlesource.com/#/c/186309/5
Original-Change-Id: I67ec04c766e249c9727b0cf2ba216522c862c2f5
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205823
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 33c468b16e7ccd8cf9266d6a9ca30c02da104821)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4baface2c109ca74f85f43a25508677c46c64159
Reviewed-on: http://review.coreboot.org/8574
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Add basic romstage support for rush. Since, dram init needs to be done before we
can jump to armv8 core, romstage will run on armv4 core as well. Thus,
correcting the compiler selection options.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Prints romstage banner and initial printk
Original-Change-Id: Ie3cd290e56a712b07c1503dab199e4e34cec04d2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205763
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d20b4e66209e902f54a07a17d5ce741f0a0b3a7b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic6b7ef4a2ea01c95d0c7f040bbd079219cf5750a
Reviewed-on: http://review.coreboot.org/8573
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add proper Kconfig options and initialize cbfs media to enable loading of
romstage
BUG=None
BRANCH=None
TEST=Compiles successfully for rush and cbfs_load_stage returns entry pointer
for romstage
Original-Change-Id: If62edcdc0496d89d30003ffd7b827b77835910fd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205762
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c89c05bc86fd6c1e49fbed5e0730659b64bffc6c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I68c10171424c85605b5065a19634d3c5dd639b78
Reviewed-on: http://review.coreboot.org/8572
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
We suspect that the code was stuck on init pllx (PLLX - acts as a clock source
for the CPU cluster). So, remove the init call for pllx. This needs to be added
later when required. Also, add a few more printks to display the progress.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Print messages seen on serial console.
Original-Change-Id: I70e908a9ce1f3598d68bda68c0401a78834597d1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205680
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d557d99edb855fbf7b32231c6746c676041bf62a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iaf56f2d587708c6e9fb01d4ced2edb5931075a81
Reviewed-on: http://review.coreboot.org/8571
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Pull in mainboard specific bootblock_init function from nyan into
rush. Additionally, pull in all files required for proper compilation of rush
after adding the bootblock_init function
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I69c736275f66eca3ad92f97d166e91d4c2301364
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205583
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit e7aac547026717d7380f71593010e3ea34ecea51)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie26f91f8caaa06af3b195246febcdc70b9fe9795
Reviewed-on: http://review.coreboot.org/8570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ic29009be42ef77261a3b535327cf5c12761023c1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8497
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Moved mctGetLogicalCPUID() to a separate file and made it available in
both romstage and ramstage.
Change-Id: I959c1caa8f796947b627a7b379c37d7307e2898e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8499
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Enable adding of clock.c to romstage and ramstage in addition to bootblock. Code
for enabling armv8 core is not included yet. clock_init added to bootblock.c
BUG=None
BRANCH=None
TEST=Compiles successfully for rush.
Original-Change-Id: I858c41a83d665da2c406707586b5e35a732177d4
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205581
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 61dbf1db72307815c4abdc218799479c334a4882)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I688e1e1373dea26557a84507a8e92d3055862801
Reviewed-on: http://review.coreboot.org/8569
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Specify a CBFS architecture value for MIPS and allow cbfstool to make
use of it.
Original-Change-Id: I604d61004596b65c9903d444e030241f712202bd
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207971
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 7c4df61715df3767673841789d02fe5d1bd1d4a0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib30524f5e7e8c7891cb69fc8ed8f6a7e44ac3325
Reviewed-on: http://review.coreboot.org/8519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib5f87bdc50c0bca370a636218d3b5d4cc9157c12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8501
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Correct function names to make them consistent with generic calling name
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I50499936e1c8da0aafd7e36a22c2c6ab373230f6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205582
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 16668529527224fca3086ee88955d29e3a268516)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I449e63b05680ca12ae81a3260fc03836686d7317
Reviewed-on: http://review.coreboot.org/8469
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Define functions for setting cntfrq register in arm and arm64 arch. This allows
SoCs to set this register independently of the architecture being used.
BUG=None
BRANCH=None
TEST=Compiles successfully for nyan and rush
Original-Change-Id: I93240419b2c012eee29a408deff34a42af943a63
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205580
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 768463fef5d630dec915aa0b95e7724d4a6f74b6)
armv8: GPL license armv8 lib
BUG=None
BRANCH=None
TEST=Compiles successfully.
Original-Change-Id: Ibe0f09ef6704ad808cc482ffec27a4db32d7f6fd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250950
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit bc115869bb0bcedbc284677ca5743b9ab40bfc7e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I298c3e76cb52f0876bce3dd4f54d875f62e9310a
Reviewed-on: http://review.coreboot.org/8468
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: Ia9420cfec5333dd5477f04cf080bdad8a37db025
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203143
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a1037f203c6a07cb116eeb1632cb7200ad022cd3)
This cherry-pick was modified to match the tegra124 uart.c, which
uses the idx and base address calculations instead of Kconfig settings.
This driver could use the 8250MEM driver when the ARM vs x86 IO
calling convention is worked out.
Change-Id: I6e439359b8bb541db4679ac144c519cf251ffed6
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8517
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: If96e0843f507b9f1db9977b5d0c47f5ed1c59999
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8533
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is just dead code.
Should we decide that we want some of these calls made, they would
be implemented in the mainboard context.
Change-Id: I1f097c8da722f3afab9aa1c80b96590c7ca457d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8532
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Already done for fam15tn/rl.
Change-Id: Id74ca13610a4ef407c866a4419139287413078a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8531
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I7fae2e9c417a7880bfa28739afa6020820fcd360
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8546
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
GCC's build system is sometimes confused by our build system's
configuration: make crossgcc failed, while
util/crossgcc/buildgcc -p armv7-a-eabi didn't.
Make sure the GCC build system runs independently from
ours by breaking any ties.
Change-Id: I563e17b22127bc8c83ebfb17252184a3b6e0e58b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8545
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
It only built i386-elf
Change-Id: I02f94d12297901136e1c17c63bbeb103c1d93e8d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8548
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Now that we use the microcode updates in the blobs repository, remove
them from the main repo. Since the microcode updates are blobs, it
makes more sense to ship them in the blobs repo rather than the main
one.
The update-microcodes.sh script is also deleted, as a more current
version resides in 3rdparty.
Change-Id: Iee74a3ede3b5eb684ef0386d270120e70173c1b4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4531
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that microcode has been added to blobs, use that one instead of
the one included in the tree. Microcode from the tree will be
removed in a subsequent patch. Since the microcode updates are blobs,
they belong in the blobs repository.
This change may introduce a build failure if the "Generate from tree"
microcode option is selected, but the blobs repository is not
enabled. We have to live with this for now, until microcode is moved
to blobs for all CPUs, at which point we may adjust Kconfig
accordingly.
Leave the FSP cpu alone for now, as that will need approval from
SAGE.
Change-Id: Ia77ba2e26c083da092449b04ab2323b91a2ca15b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4530
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This pulls in the Intel microcode from blobs, and allows us to move
forward with relocating microcode updates in blobs.
Change-Id: Iaa046cc20c7825aac168a6ed97c87be548634df3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8356
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
During the development of commit bde6d30 (x86: Change MMIO addr
in readN(addr)/writeN(addr, val) to pointer), there were several iterations
and patterns tried. An intermediate pattern was the use of u32 pointers,
and division by sizeof(u32). Some of these did not get properly
changed to pointer types of length 1, causing a regression in
the Intel Ibex Peak SATA driver, fixed in commit 9b5f137
(Intel ibexpeak: Fix SATA configuration).
Other regressions of this pattern are fixed here. I audited all changes
to u32 types, and the other ones are safe.
Change-Id: I9e73ac8f4329df8bf0cdd1a14759f0280f974052
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Reviewed-on: http://review.coreboot.org/8530
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Winbond W83793 fan controller is not automatically
configured correctly on power application, leading to
abnormal, and in some cases random, fan behaviour.
This commit enables the controller and sets sane default
values.
TEST: Booted mainboard and verified that the correct number
of fan speed sensors were visible from hwmon under Linux.
Also verified that, unlike before, the CPU fans were running
at a high enough speed to properly cool the CPUs. Verified
the 8 fan outputs under direct control of the W83793 device.
Verified voltage and temperature sensors and limits via output
of the 'sensors' command.
Change-Id: Ie3753bd3111d9d9eb46826da410c132caec4d9fe
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8503
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This allows devicetree.cb to set:
Minimum PWM values
Temperature sensor source
Voltage sensor high/low limits
Fan pin routing
Default PWM values
Manual PWM values per-fan
Change-Id: I3a321406a26ae01a121289d24b41c9f988dd6f30
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8502
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Init curses as late as possible and tear them down early. There are possible
error outs after that and they don't look nice with curses initialized.
Change-Id: I9128ae8eee25940716b8d223cc7ec6c0abb6838e
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8528
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Missing parentheses around addition.
==22611== Invalid write of size 8
==22611== at 0x401B26: main (nvramcui.c:146)
==22611== Address 0x5a67c40 is 32 bytes inside a block of size 33 alloc'd
==22611== at 0x4C2BC0F: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==22611== by 0x401AA9: main (nvramcui.c:137)
Change-Id: I9fd6a619dd03ebaaa066bca8fa5838e76374c984
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8527
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Flush out the initial screen window and render the form before the first
keypress. It looks overly weird otherwise and is very likely unintended.
Change-Id: I8700e36e608f2ba115359070f75b7dc9f230291e
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The version field for t132 cpus is 0x00130001. Update it to
the correct version.
BUG=chrome-os-partner:29882
BRANCH=None
TEST=Built and was able to see serial with subsequent changes.
Original-Change-Id: I39d560307261fdfc34e071f5c35a4397c134e03c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205435
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 14916b3ba5545ab2cb35b6a4a7fa231b895ede46)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I785069d3eb82ed24bafd52ef627d53505a35c09a
Reviewed-on: http://review.coreboot.org/8467
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add support for library functions required to access different system registers:
1) PSTATE and special purpose registers
2) System control registers
3) Cache-related registers
4) TLB maintenance registers
5) Misc barrier related functions
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I8809ca2b67b8e560b34577cda1483ee009a1d71a
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203490
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5da840c5d1f3d8fdf8cc0d7c44772bf0cef03fbb)
armv8: GPL license armv8 lib
BUG=None
BRANCH=None
TEST=Compiles successfully.
Original-Change-Id: Ibe0f09ef6704ad808cc482ffec27a4db32d7f6fd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250950
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit bc115869bb0bcedbc284677ca5743b9ab40bfc7e)
Get the library and the GPL license in a single commit.
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4753a6b0d13a6f7515243bfa8e749e250fdd749d
Reviewed-on: http://review.coreboot.org/8465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
CONFIG_CONSOLE_SERIAL_UART has been updated to
CONFIG_DRIVER_UART. The UART may be used for more than serial console.
Change-Id: Ife6e6861d210126b2b9ba5eee9ff72e8a447c47f
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8516
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The early_console.c file isn't used or built. It has been replaced
by the generic uart and console drivers.
Change-Id: I505b4e48d2369dbbfd92ef1dab364c5f2ed924df
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8529
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fix up commit ce7ecf9c (baytrail: enable monotonic timer), which
selected `HAVE_MONOTONIC_TIMER` explicitly, although it is already
selected by `TSC_MONOTONIC_TIMER` (cf. `src/cpu/x86/Kconfig`).
Therefore remove the explicit selection of that Kconfig option.
Change-Id: I8964771947a6f7457dcdefe7a17be623ae0ef900
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8471
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
nvramcui.c: In function ‘main’:
nvramcui.c:68:8: warning: unused variable ‘cur’ [-Wunused-variable]
ITEM *cur;
^
Change-Id: I5c692fc2e6da460cd7c6f7978378c92587d829d2
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: http://review.coreboot.org/8525
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
No real harm done (thanks to our free() implementation),
but let's do it right.
Change-Id: Ib98d28aabc043dff5c288728c33490a79f09f35a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8511
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Icecbcc1dee837ecfe0dd52bade3b83fdcdd15bad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8513
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch introduces support for building a MIPS cross compiler
targetting little endian machines by default.
Original-Change-Id: I116f6f431cdf80f5f5f58d2743357a9f70a7347d
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207970
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d6c9603c41b3d11400cee7b5b409203af0632aa2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I543cd2276d2f63ed2036a1c1259c9a07cb8a4ba8
Reviewed-on: http://review.coreboot.org/8518
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It got broken with commit bde6d309.
Change-Id: I0d7180b1659da45bf87d4de46b7b387cbc73cd0e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8523
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a new driver for Intel i210 MACPHY with the goal to
update the MAC address in i210 if it is found
during PCI scan.
Change-Id: I4d4e797543a9f278fb649596f63ae8e1f285b3c3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8404
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
DEFAULT_CONSOLE_LOGLEVEL_* is supposed to be selected by the user, and
should not be overriden by any other part of the tree. As such, remove
the selection of DEFAULT_CONSOLE_LOGLEVEL_7 from these two boards.
Change-Id: I194a71b371b184e81a16fec2bd21f1b0deb4ebbf
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8486
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
This option is already defined in console/Kconfig, and is intended
to be controlled by the user. Only six boards in the entire tree
redefined it, so remove the definition from those boards.
Change-Id: I3a65444f63c93c01d78569a9a7eb01158fb290bd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8457
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
SUPPORT_CPU_UCODE_IN_CBFS is a deprecated option now that all CPUs
with updateable microcode (except AGESA) load microcode from CBFS.
CPU_MICROCODE_ADDED_DURING_BUILD is a state variable that is set
based on user's choice in the microcode menu and should not be changed
directly.
Eliminate INCLUDE_MICROCODE_IN_BUILD variable, whose use directly
interferes with the microcode mechanism, remove selection of
CPU_MICROCODE_ADDED_DURING_BUILD, and do not depend
SUPPORT_CPU_UCODE_IN_CBFS on anything. This makes usage of the
microcode mechanism consistent with other CPUs in the tree.
This incorrect usage of the Kconfig variables was hiding the fact that
some of the microcode files present in fsp_baytrail/microcode_blob.c
were not present in the tree.
Change-Id: I71cb3f834c22c0363a20bd469797a9f51c215371
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8484
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Test for devno != -1 before trying to access array[devno]
(which may be array[-1]).
Change-Id: Ia69cc7eba0335f02bb0efec003a320a3c0646acb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8509
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The following changes are included.
Changes in version 1.0.3:
- Fixed mpc_pow, see
http://lists.gforge.inria.fr/pipermail/mpc-discuss/2014-October/001315.html
- #18257: Switched to libtool 2.4.5.
Changes in version 1.0.2:
- Fixed mpc_atan, mpc_atanh for (+-0, +-1), see
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57994#c7
- Fixed mpc_log10 for purely imaginary argument, see
http://lists.gforge.inria.fr/pipermail/mpc-discuss/2012-September/001208.html
Upgrading also fixes the issue, where for example running `make crossgcc-arm`
ails as MPC cannot be built.
Building MPC 1.0.1 ... failed
As it worked for others, it turns out that I had a release archive for
MPC 1.0.1 cached from October 2014, which was generated incorrectly, so
that `./configure` and `Makefile` are missing.
$ LANG=C ls -l util/crossgcc/tarballs/mpc-1.0.1.tar.gz
-rw-r--r-- 1 joey joey 224232 Oct 19 2013 util/crossgcc/tarballs/mpc-1.0.1.tar.gz
$ md5sum util/crossgcc/tarballs/mpc-1.0.1.tar.gz
22a27bee89616dca4d654fc579a816e5 util/crossgcc/tarballs/mpc-1.0.1.tar.gz
$ md5sum mpc-1.0.1.tar.gz # downloaded today
b32a2e1a3daa392372fbd586d1ed3679 mpc-1.0.1.tar.gz
So upgrade to MPC 1.0.3 as the release archive as of today contains the
needed files.
$ md5sum util/crossgcc/tarballs/mpc-1.0.3.tar.gz
d6a1d5f8ddea3abd2cc3e98f58352d26 util/crossgcc/tarballs/mpc-1.0.3.tar.gz
Change-Id: Ibfd02a9b362b12361b210d512420b87caebb0fdf
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
TEST:Run `make crossgcc-arm` and observe `Building MPC 1.0.3 ... ok`.
Reviewed-on: http://review.coreboot.org/8521
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change gpp_configuration to GPP_CFGMODE_X1111 (was X4000), this is done
to only advertise x1 lane width for PCIe link 0:15.0.
Hide functions of PCIe links that have no slots connected. Our PCI
infrastructure does not support bridge devices that are set off
in devicetree but remain visible in the PCI hardware tree.
Change-Id: If90919634995076ab0f029baece3ba9cb8f3f3b2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8388
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Remove functions 0:12.1 and 0:13.1 that do not exist in the hardware.
Disable 0:14.1 IDE controller, as it would only be used with SATA ports
4 and 5 that are not populated with connectors in the hardware.
Disable 0:14.2 HD audio, as it is not implemented in the hardware
Disable 0:14.5 OHCI controller, as ports behind this USB1.1 -only controller
are not populated in the hardware.
Fix some alignment and whitespace.
To my knowledge these changes are not included with SAGE release
pcengines.apu_139_osp.tar.gz, but that tarball does not contain
either devicetree.cb or a pre-compiled static.c file so I cannot tell
for sure.
Change-Id: Idcb8e76645fce7e89a37ff7007531b668f472131
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8328
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Interrupts from USB controllers 0:16.0 and 0:16.2 were not routed
in PIC mode. The only affected peripheral was the SD card reader.
This patch is not included with SAGE release pcengines.apu_139_osp.tar.gz.
Change-Id: Ie7f0fa3751b46cca0132bd6dcada3628c6a45efb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8327
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Some GPIO pins are shared with (disabled) PCI bridge 0:14.4.
As our PCI subsystem currently does not configure PCI bridges that are
marked disabled, but remain visible in the hardware, we cannot mark 0:14.4
disabled in devicetree just yet.
Change-Id: Ibc5d950662d633a07d62fd5a5984a56d8e5f959d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8326
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
While we cannot recreate exact copies of PC Engines APU1 firmware images,
I shall upstream the vital changes for coreboot from the following tarballs
SAGE has published to meet GPL:
SageBios_PCEngines_APU_sources_for_publishing_20140405_GPL_package.tar.gz
md5sum: ce5f54723e4fe3b63a1a3e35586728d4
pcengines.apu_139_osp.tar.gz
md5sum: af6c8ab3b85d1a5a9fbeb41efa30a1ef
The patch here adds Kconfig, Makefile.inc and devicetree.cb files to
match 2014/04/05 release tarball config.h and static.c files.
Change-Id: Id61270b4d484f712a5c0e780a01fc81f1550b9ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8325
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Drop persimmon customization for superio, azalia, PCI-e reset etc.
Change-Id: I35f49ca67e6cc2df826f24e5a4bb3db5bb6f711e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8324
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Some GPIO pins are shared with PCI bridge 0:14.4.
As our PCI subsystem currently does not configure PCI bridges that are
marked disabled, but remain visible in the hardware, simply setting 0:14.4
disabled in the devicetree does not work here yet.
Change-Id: Ib9652e12a888e1d797d879d97737ba4101b7029a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8495
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I89294c22c57564262e53e36c5ae9ac6eb0ed934a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8510
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The goto statement skipped all the code that is necessary
to fill in the data structures that are read right after
the jump.
Since there doesn't seem to be useful data, why write these
ACPI objects in the first place?
Change-Id: I1d06c11a7a31517b81e54159355d5c27e3cc3735
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8507
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
xgifb_probe() doesn't own the object it tries to free
in its error code path, potentially leading to a
double-free in xgi_z9s_init().
Since we don't actually implement free, it doesn't matter
too much, but let's keep things proper.
Change-Id: I70c8f395fd59584664040ca6e07be56e046c80fc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8506
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The change in commit 5636237 allows */cpu/amd/agesa/* to be removed.
TEST: Booted the amd/parmer board.
Change-Id: I8d2d2639f8e5f3b1dd58be96be98db0eff7b268f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8505
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This copies a change made in commit 1cc3338 that allows alloc_cbmem()
to be called only in ramstage. This will allow the */cpu/amd/agesa/*
field to be removed from the list of illegal_globals EXCLUDE_FILEs.
TEST: Booted the amd/parmer board.
Change-Id: I2d4b5352815aae090ffce7b83e487f7c0a4d0c88
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
That's just how we roll.
Change-Id: I47ef62476703fdf2544d9cd77c30ae12452afeae
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8514
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
If function cmos_init() was called with parameter invalid
set, this indicates, that the caller has found a power
loss event in the RTC registers. In this case, we need to
load the default date and time because it can be corrupted.
Change-Id: Ib8d58a14da0182ceb8167e67440a0f1ea2a20eb7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8373
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Fan 2 and Fan 3 were inexplicably set to zero after device
setup.
Change-Id: I37945745dbfaf33eb28808d85cdf75dca401e44b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8520
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Without this change the builder would fail with the complaint
that there was a global static variable in romstage. alloc_cbmem()
is only called in ramstage. The alternative was to add
*/cpu/amd/pi/*.romstage.o to the list of illegal_globals
EXCLUDE_FILEs in arch/x86/init/romstage.ld.
TEST: Booted the amd/lamar board.
Change-Id: I5167910ff790a3152a4ad8e5af0a4a3b17894f0f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8256
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This adds the AMD Family 15h model 30 CPU.
S3 suspend/resume currently is not supported.
Tested on the amd/lamar platform.
Change-Id: Ifef55747a5d715b17937fc75ab9d35945b59f0e6
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The coreboot I²C API was completely reworked in commit
* cdb61a6 i2c: Replace the i2c API.
For the allwinner I²C driver, wrappers to the old API were provided
on a "best guess" basis. Replace these wrappers with proper
transaction handling based on the i2c_seg API.
Change-Id: Ibdda3b022ce4876deb2906e17a5a0ca9e939aada
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8431
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Originally, axp209_(read|write) accessors relied on i2c_(read|write)
to return the number of bytes transferred. This was changed in
* cdb61a6 i2c: Replace the i2c API.
to return an error code or 0 on success. This caused the AXP209 check
to fail. Fix the accessors to account for this new behavior.
Change-Id: Ib0f492bd52260d224d87f8e8f2d3c1244d1507df
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8432
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Fix up commit 1b6e7a67 (Updates to the board status script) adding this
comment before running `cbfstool` by moving it to a more appropriate place.
Change-Id: Iff79ed44e8e5ced55f2345407d1668858098ebe4
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8491
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Kconfig variable is not implemented.
Also fix broken abuild.
Change-Id: I569f44e97abc570158472ddbd0f890315233f8a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8494
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
We only need one of devx and dev. This function should be called
with dev already adjusted if link_num > 3.
Change-Id: I7166bbb88143bc28802c9530c4da16db67868d8e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8351
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I9a24f9897115ce37ee11ca41c8b74142c95fc534
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8350
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I198f2ad321e1a8b6d932f5624b129e312e36a309
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8349
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6ce784fd9e7a6876a37c910c503fafa3a17bf96f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8348
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Id8fc1d7d8a23238e6848cd2cf4270d782e90a7d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8347
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iee51c51b662d1f5e3d918d1e5b961f06c6b99df6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8346
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I2c2d586fc572b78b5019f8ef2714959799a8d2a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/8480
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These settings are specific to the SteppeEagle SOC and should
be made in its northbridge code rather than the CPU code.
Change-Id: I1a231f95225e1414b0cbc026a2a7b7797bd91fca
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8254
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
They seem to have been copy-pasted during the backport from sandybridge.
Change-Id: I2277bb90e6da2676b31eb2665b7c15f074e3d4bf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8295
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Change-Id: Idf37d51c6b53ae85dc96fb609531ceda06ec948c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8470
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
coverity isn't too happy with ccache, and given the current setup
it also isn't too useful.
Change-Id: I420fdd7350dff29296d7101569cb183afe1f92d6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8478
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This tells abuild that it can in fact build arm64
images.
Change-Id: I47695372053513ca039e118776aa904ea0afa21d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8474
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
It's not very useful to try to link a host tool into
the bootblock image.
Change-Id: Id3b6496c061d41184fbb516d56746855b455b0c3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8473
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
So don't treat them as such. Fixes interactions with
class initialization (eg. verstage) on lint.
Change-Id: I8b5f2a56e73ba934590c45494e6a49f93c42096f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8472
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Note that the limit is not set in the devicetree.cb which use native
sandybridge raminit, as it is not needed. When that isn't set, it's
automatically set to zero, and when we find that, we automatically
return the default limit. Thus behavior isn't changed for any board.
Change-Id: I447399eea71355612b654710a56f3a0077c2f7f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8476
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We can successfully bring up systems if timC calibration fails, as has
been demonstrated with google/butterfly. As a result, do not die(),
but simply print a message and continue in the hope that we may be
able to boot.
Change-Id: I49ec80324f63b2d45ae8f61c5c26454acb9c232f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8475
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Builds with cbootimage.
BUG=None
BRANCH=None
TEST=build test
Original-Change-Id: I796f171031bacf17106878d4a554e8f1cbfe93f8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203145
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 4778ae4d08a25306407f0fd2fe47976d63463f9d)
Increase the bootblock area for the larger BCT that is generated by
the coreboot version of the cbootimage tool.
Change-Id: I42b8208504bf4936a9fa14f820d665590f6a3754
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8413
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Changes might be required for .bct files as we get to know more.
Pulling in files from mainboard nyan for now
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Change-Id: Iaf81a384af0469c77940cf7309ba68018110b5eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/203144
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d3633f8cf8c01a07b54ceef2dd7bf7a64afd7c76)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8412
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
