| Age | Commit message (Collapse) | Author |
|---|
|
The `smbios.c` file is rather long. To improve navigability, place weak
function definitions on a separate compilation unit.
Change-Id: Idd2a4ba52b6b23aad8fd63e66ffa747d49ea713d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Most of `smbios_fill_dimm_manufacturer_from_id()` is noise. Factor the
switch into its own function to improve readability.
Change-Id: Ia0757c01572709d16589a4ed622ca2d2cb69dda2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
We can reduce the amount of duplicated code with a ternary operator.
Change-Id: I8be95a62c54749d39e3e8821abd46d9f467a5a49
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Put `__weak` at the beginning of functions and reflow lines to leverage
the increased line width of 96 characters.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I3a5fd2d4344b83e09f89053c083ec80aa297061e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fill in the maximum DRAM capacity and slot count read from CAPID0_A
registers on Sandy Bridge and Haswell.
While the register isn't part of the Core Series datasheet, it can be
found in the corresponding "Intel Open Source Graphics Programmer's
Reference" datasheets.
Note that the values for DDRSZ (maximum allowed memory size per channel)
need to be halved when only one DIMM per channel is supported. On mobile
platforms, all but quad-core processors are subject to this restriction.
Tested on Lenovo X230:
On Linux, verify that `dmidecode -t 16` reports the actual maximum
capacity (16 GiB) instead of the currently-installed capacity (4 GiB) or
the max capacity assuming two DIMMs per channel is possible (32 GiB).
Change-Id: I6e2346de1ffe52e8685276acbdbf25755f4cc162
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The `GetPhysicallyInstalledSystemMemory` API call, at least on Windows
10, returns an error if SMBIOS tables are invalid. Various tools use
this API call and don't operate correctly if this fails. For example,
the "Intel Processor Diagnostic Tool" program is affected.
Windows then guesses the physical memory size by accumulating entries
from the firmware-provided memory map, which results in a total memory
size that is slightly lower than the actual installed memory capacity.
To fix this issue, add the handle to a type 16 entry to all type 17
entries.
Add new fields to struct memory_info and fill them in Intel common code.
Use the introduced variables to fill type 16 in smbios.c and provide
a handle to type 17 entries.
Besides keeping the current behaviour on intel/soc/common platforms, the
type 16 table is also emitted on platforms that don't explicitly fill
it, by using the existing fields of struct memory_info.
Tested on Windows 10:
The GetPhysicallyInstalledSystemMemory API call doesn't return an error
anymore and the installed memory is now being reported as 8192 MiB.
Change-Id: Idc3a363cbc3d0654dafd4176c4f4af9005210f42
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Set platform defaults for SPI settings in Kconfig for EFS.
BUG=b:158755102
TEST=Build and boot test on Tremblye and Morphius. Verify
values in output image in a hex editor. Measure 1st x86
timestamp, perf improves by over a second.
Change-Id: I765dada14700f4800263d2d3844af07fad0e5b71
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43303
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There was a mix of open coding DXIO logical lane numbers and clkreq
pins. And there are separate macros depending on the baseboard
as well as processor type. Remove the indirection and supply the values
directly in the descriptors.
BUG=b:162423378
Change-Id: I779cb0a514e3b668265e6039d6e7e7bd0f3d49ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since regions in bootmem are sorted by increasing base address, we may
bail out of the search loop as soon as the region_base is bigger than
the max address allowed.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I44b44bf9618fd0615103cbf74271235d61d49473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43512
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update to match the 0.8.5.7B release of PSP blobs.
BUG=b:162057232
TEST=Boot Trembyle with, and without, new blobs. Inspect vboot
using a serial-enabled bootloader
Change-Id: I03f11cfc1dc8f511661def1c81421f8558dcd1f5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44041
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:162057232
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ifd4ac0655f7ada5ec10a266fdb2b930861959215
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44040
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Embedded Firmware Structure should contain SPI speed, mode
and Micron support for the PSP to program. Add Kconfig options
to specify these values to use for future platform changes.
BUG=b:158755102
TEST=Test menuconfig and platform build for Trembyle and Mandolin.
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Change-Id: I78558fa3fa27c70820f0f3d636544127adab6f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42567
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change splits the device operations for internal and external PCIe
GPP bridges so that the external bridges use `pciexp_scan_bridge()`
instead of `pci_scan_bridge()`. `pciexp_scan_bridge()` is required for
external GPP bridges to enable ASPM on downstream devices if supported.
BUG=b:162352484
TEST=Verified on Trembyle:
$ lspci -s 1:00.0 -vvv | grep ASPM
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64u
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ice2aa3e4758adccf7b0b89d4222fc65a40761153
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Configure the correct eMMC present flag for Ezkinil new added sku_id.
0x5A020015 NVME present
0x5A020016 eMMC present
0x5A020017 eMMC present
BUG=b:159761042
TEST:none
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: I1b89cc4568283d5dbebf0ab7ac578368d3a3637e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43753
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:162010077
Change-Id: Iba3e3ec62cdfd818077017abd28fa754c2ae7797
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
According to MP MB to port SMBIOS type8 data.
Tested=Use "dmidecode -t 8" to dump SMBIOS data,
and check if type8 tables are implemented.
Change-Id: I356e645774d78c623c1398c8b1473562e1529cf2
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested on OCP Delta Lake, the timer action can be set correctly.
Change-Id: I1013169e12455e01214d089c9398c78143af4df8
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44019
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add overridetree info for the touchscreen.
BUG=b:160129126
TEST=cros flash-ap -b dedede
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I55fc0749b824a0bf4b615d02bd8bc39bcdd589e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
It is expected both of TCSS D3Hot and D3Cold are enabled by default.
BUG=None
TEST=Verified both of TCSS D3Hot and D3Cold configuration on TGLRVP.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Id569d8191f82f12379b57a9c50aec31776220bb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
It is expected TCSS D3Hot is enabled. D3Cold configuration is
through SoC stepping determination. D3Cold is disabled on pre-QS
platform and enabled on QS platform.
BUG=None
TEST=Verified both of TCSS D3Hot and D3Cold configuration on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I9a8b838dcb449ca78d15b18543d97d84b59417ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44004
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update configuration for both of TCSS D3Hot and D3Cold. It is expected
D3Hot is enabled for all platforms. Because there are known limitations
for D3Cold enabling on pre-QS platform, this change reads cpu id and
disables D3Cold for pre-QS platform. For QS platform, D3Cold is
configured to be enabled.
BUG=None
TEST=Verified D3Hot is enabled, D3Cold is disabled for pre-QS (cpu:806c0)
and enabled for QS (cpu:0x806c1).
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I534ddfefcd182f5b35aa5e8b461f0920d375a66d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43980
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently HDA gets enabled by the option EnableAzalia, but
this duplicates the devicetree on/off options. Therefore use
the on/off options for the enablement of the HDA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableAzalia setting.
Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently HECI3 gets enabled by the option Heci3Enabled, but
this duplicates the devicetree on/off options. Therefore use the
on/off options for the enablement of the HECI3 controller.
I checked all corresponding mainboards if the devicetree configuration
matches the Heci3Enabled setting.
Change-Id: I4f99d434dfee49a9783e38c3910b9391d479cb83
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43864
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this
duplicates the devicetree on/off options. Therefore use the
on/off options for the enablement of the eMMC controller.
I checked all corresponding mainboards if the devicetree configuration
matches the ScsEmmcEnabled setting.
Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Currently TraceHub gets enabled by the option EnableTraceHub, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the TraceHub controller.
I checked all corresponding mainboards if the devicetree
configuration matches the EnableTraceHub setting.
Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently SMBus gets enabled by the option SmbusEnable, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SMBus controller.
I checked all corresponding mainboards if the devicetree configuration
matches the SmbusEnable setting.
Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Currently LAN gets enabled by the option EnableLan, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the LAN controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableLan setting.
Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently SATA gets enabled by the option EnableSata, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SATA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableSata setting.
Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
sustained_power_limit = 12w
fast_ppt_limit = 24w
slow_ppt_limit = 20w
BUG=b:162377903
BRANCH=master
TEST=emerge-zork coreboot chromeos-bootimage
Change-Id: I9baf9990e26edbbadfba85bc16b380c46684033d
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change updates TGLRVP configuration to have USB Type-C connector
device properties filled into ACPI SSDT.
TEST=Built and booted to kernel on tglrvp boards. Verified the USBC
scope under LPCB.EC0.CREC with required connector device properties.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ifd4c59afb3b8a222598fd4ff36d72c4b877bdad2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I0b7bdd9f46846bc9c3d9672b50dfe2fb166fcb78
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ic09c04cfa18408c61d7e99ea29bccc23acbd7144
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update kconfig.md to reflect that defconfig (instead of mini-config)
file is generated by running "make savedefconfig".
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4075e5b51e3c504eaad25e3abfc52ba593364ee9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The HSIO tuning guide recommendation for the default USB3 settings is to
have de-emphasis set to -3.5dB with the equation 20*log(X/64). 0x29 results
in a value close to -3.5dB and it is the value that was used for the default
on past platforms so I used it here as well.
BUG=b:160721468
TEST=Ensure WWAN device does not disconnect during use.
Change-Id: Ia594996cb55523dacce0d4bef98cc217321c62de
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory part being added is:
MT53E512M32D2NP-046 WT:E
K4U6E3S4AA-MGCR
H9HCNNNBKMMLXR-NEE
MT53E1G32D2NP-046 WT:A
K4UBE3D4AA-MGCR
BUG=None
TEST=Build the magalor board.
Change-Id: I7bb19d6d4a66e66fed0564592c803c2af1045b0c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch uses the fill_processor_name function in order
to fetch the CPU Name.
TEST = Successfully able to build boot Waddledoo and verify the
cpu_name from CPU log "CPU: Genuine Intel(R) CPU 0000 @ 1.10GHz".
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I532e05d9bb71fdff24e086e81ec72ffe8dc2c22d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43480
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Strip manufacturer information from SPDs before injecting into APCB.
This allows more flexibility around changing DRAM modules in the future.
BUG=b:162098961
TEST=Boot, dump memory info
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I1bbc81a858f381f62dbd38bb57b3df0e6707d647
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I34b8083eb14d5f82699cf92744000a416d2816ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This is already defined in <commonlib/helpers.h> and it gets included
implicitly by some other header. Fixes building with code coverage.
Change-Id: Id2dc6cc34b6f1d351d8e1b52d8cc4ada8666c673
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add interrupts for all enabled superio devices to quiet the warning
about missing interrupts in devicetree.
Vendor uses interrupt 0x00 for all devices except SUART* and KBC, so
let's do that, too. This also changes SWC from 0x0b to 0x00.
Verified with superiotool on X11SSM-F.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I7a6dc7345f020e53415a7d0d104ce93ab4b194fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonas Löffelholz
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
They're more or less the same but reworked for hopefully some more
clarity. There have been some best practices around documenting the
reason for expedited processing so let's make them official, too.
Change-Id: I620e48016a1ceda2ac43f26624ed21af01f6a0a5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43484
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VPD variables for enabling/disabling FRB2 watchdog timer and setting
the timer countdown value in romstage. By default it would start the timer
and trigger hard reset when it's expired. The timer is expected to be
stopped later by payload or OS.
Add RO_VPD and RW_VPD sections.
Tested on OCP Tioga Pass.
Change-Id: I53b69c3c5d22c022130fd812ef26097898d913d0
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When emitting a fan's _FPS (Fan Performance States) table, the revision
field was missing. According to ACPI spec 6.3, the current revision is
zero, so add that Package entry before the others.
BUG=b:149722146
TEST=verified first element of \_SB.DPTF.TFN1._FPS is 0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If16d4751f1d924807f5087d93b348e58d5265197
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43978
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new utility for converting a pad configuration from
the inteltool dump to the PAD_CFG_*() macros [1] for coreboot and GPIO
config data structures for FSP/sdk2-platforms/slimbootloader [2,3].
Mirror: https://github.com/maxpoliak/pch-pads-parser.git
[1] src/soc/intel/common/block/include/intelblocks/gpio_defs.h
[2] https://slimbootloader.github.io/tools/index.html#gpio-tool
[3] 3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Include/GpioSampleDef.h
Change-Id: If3e3b523c4f63dc2f91e9ccd16934e3a1b6e21fa
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35643
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:159198385
TEST=confirm both using Mandolin
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I91654817608ab62e4104959b8876333911b90175
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43299
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIT(x) needs <types.h>.
Change-Id: Icaeda969cae52d9c62d976db4ead0e734efa838c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add bluetooth reset gpio 143 to dalboz baseboard devicetree
Add bluetooth reset gpio 14 to trembyle baseboard devicetree
Remove bluetooth reset_gpio when not supported on a specific board
variant.
BUG=b:157580724
TEST=Boot Ezkinil with Realtek 8822CE, observe log
[ 12.240720] Bluetooth: af_bluetooth.c:bt_init() HCI device and connection manager initialized
[ 12.249272] Bluetooth: hci_sock.c:hci_sock_init() HCI socket layer initialized
[ 12.256520] Bluetooth: l2cap_sock.c:l2cap_init_sockets() L2CAP socket layer initialized
[ 12.264575] Bluetooth: sco.c:sco_init() SCO socket layer initialized
[ 12.273700] usb 3-2: GPIO lookup for consumer reset
[ 12.273702] usb 3-2: using ACPI for GPIO lookup
[ 12.273705] acpi device:18: GPIO: looking up reset-gpios
[ 12.273707] acpi device:18: GPIO: looking up reset-gpio
[ 12.273711] acpi device:18: GPIO: _DSD returned device:18 0 0 0
[ 12.273737] gpio gpiochip0: Persistence not supported for GPIO 14
[ 12.273960] usbcore: registered new interface driver btusb
Change-Id: I14e3ef099d5b8f48c915b41284039b3508dec975
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add find_dev_nested_path helper function to simplify finding deeply
nested devices.
BUG=b:157580724
TEST=Find bluetooth device on dalboz
Change-Id: I48fa5fcad0030fb6dcea97b9fc76e1d3d3f9b28f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enable the Kconfig flag VBOOT_VBNV_CMOS_BACKUP_TO_FLASH for psp_verstage
to save the vbnv data to the SPI rom.
BUG=b:161366241
TEST=Boot Morphius, Read rom from SPI and extract the RW_NVRAM region.
See that it's getting updated.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0d4b92fa321a8409468b8d8fc40be0d4b57b664b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43487
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SPI needs to be initialized to save VBNV (Vboot Non-Volatile memory)
to flash.
BUG=b:159811539
TEST=Build & boot.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iebf3ed3f5d6be0dda717d91d5b2fbcf2a1cc43cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Two usb Type-C ports under the actual mux device. Each port has its own
ACPI device entry. These nodes are the ones that the USB Type-C
port/connector device will refer to in order to configure the mux.
TEST=Built image-tglrvp-up4.bin successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I8423ddbb5bc189899a9e19e7da6e2ee7b7fecc18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The commit hash is the same as the SeaBIOS one, and is indeed from the
SeaBIOS repository.
Change-Id: I820b9b748778050fc694c13b1e2b2fc80885b4f1
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43749
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If48cd055477011cece7921cea462aab176e170fb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Currently, if PSPBTLDR_FILE is empty, the md5sum will hang forever on
stdin, leading to the appearance of a hung script. This is
confusing.
There's no option to md5sum to say "you must use this file", so instead,
use dd with if to ensure we at least get an error if the file is not found.
Not optimal, but better than what we have now.
Change-Id: Ia13035bc592bdf2a515dfd2e052ae9135e218612
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fill in the new fields introduced with version 3.0 and install the new
entry point structure identified by _SM3_.
Tested on Linux 5.6 using tianocore as payload:
Still able to decode the tables without errors.
Change-Id: Iba7a54e9de0b315f8072e6fd2880582355132a81
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Rearrange code to unify with the rest of xx20/xx30 boards. No functional
changes - just smaller diff output.
Change-Id: I5867b2a90b2e53a3a9dd919701f1e185cb39cf78
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Replace functionally identical files with t440p/acpi/superio.asl which
is licensed under more flexible terms (GPL-2.0-only or no licensing
terms vs. GPL-2.0-or-later). Apart from licensing terms these files are
identical.
This makes diff between boards smaller.
Change-Id: I1cd4a85b65ceaa0a383416e7276ad41a41783cb7
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43685
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id6298883c39c21179b13696dab630818b81026ff
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43905
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
H9HCNNNBKMMLXR-NEE
MT53E512M32D2NP-046 WT:E
K4U6E3S4AA-MGCR
BUG=b:161215903
BRANCH=NONE
TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ib61af2399541c4caf4a310a34e778e0ba1cbd3ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43802
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select the drivers for ALC5682 codec and MX98360A spk amp
BUG=b:161407664
BRANCH=NONE
TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ibe3d878b1058bfae4143d96be854884e61394ad5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Follow schematic to modify USB port setting and clean up I2C clock tuning.
USB2 [0]: USB Type C Port 0
USB2 [1]: USB Type C Port 1
USB2 [2]: None
USB2 [3]: USB Type A Port 1
USB2 [4]: None
USB2 [5]: Camera
USB2 [6]: None
USB2 [7]: WLAN module - BlueTooth
USB3 [0]: USB Type C Port 0 (M/B side)
USB3 [1]: USB Type C Port 1 (Sub/B side)
USB3 [2]: None
USB3 [3]: USB Type A Port 1
USB3 [4]: None
USB3 [5]: None
BUG=b:161407664
BRANCH=NONE
TEST=Build the coreboot image on madoo board.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ia73593f52adee3806e725127891f084a08bf1360
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43750
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow schematic to modify some GPIO pins.
GPP_D12 - NC Pin
GPP_D13 - NC Pin
GPP_D14 - NC Pin
GPP_D15 - NC Pin
GPP_E0 - NC Pin
GPP_E2 - NC Pin
GPP_H6 - NC Pin
GPP_H7 - NC Pin
GPP_S02 - NC Pin
GPP_S03 - NC Pin
BUG=b:161407664
BRANCH=NONE
TEST=Build the coreboot image on madoo board.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I85aadfb0d020055eec921c7646c16ae6c95a606f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43745
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update dq/dqs mappings based on voxel schematics.
BUG=b:155062561
BRANCH=none
TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: Ida248094a1477fe457026e18f313385082ee71f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43794
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current I2C5 bus frequency is 367 kHZ, which does not meet the spec.
This change updates scl_lcnt, scl_hcnt, scl_hcnt value for I2C5 to bring
the bus frequency closer to 400kHz.
BUG=b:153588771
TEST=Verified that I2C5 frequency is between 389-396kHz.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: If59502aec7c3ab55864a518d626cde52aee18373
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43746
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a missing newline to a printk in the max98373 driver.
BUG=none
TEST=verified BIOS boot log is properly formatted on volteer.
Change-Id: I1c989729bdc71736975901566023e0057a6d0556
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This adds the PCI ID of the realtek 5261 PCIe to SD Express card
reader.
BUG=b:161774205
TEST=none
Change-Id: I4d5e6cfca59b02adc74a0c148281a92421fe209d
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This copies over the USB daughterboard device tree config from volteer
to volteer2. These two boards are basically identical in this area so
the config should also be identical.
BUG=b:158673460
TEST=none
Change-Id: If8a82bc18b36d92a1c851b49612edfbefa18ec54
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This ensures that it's available under BSD license terms.
Change-Id: Ica13014b847473fee02516be0b27684c6cfb07bc
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43964
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Re-organize the existing generic wifi driver into a generic wifi chip
driver. This allows generic wifi chip information to be added to the
devicetree.
BUG=None
TEST=./util/abuild/abuild
Change-Id: I63f957a008ecf4a6a810c2a135ed62ea81a79fe0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43768
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:161734657
TEST=Ensure that the discrete WiFi information is built into ACPI table.
Scope (\_SB.PCI0.RP01)
{
Device (WF00)
{
Name (_UID, 0x923ACF1C) // _UID: Unique ID
Name (_DDN, "WIFI Device") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x43,
0x03
})
}
}
Change-Id: I9a9259e167fc213291b89e151729553ec4649eaf
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43769
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop a leading blank line in the license header comment.
Change-Id: Ic3d7568303f9d816a8727a2960270e7667d41104
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
On Haswell platforms, the processor and the PCH are two separate dies,
and communicate through a high-speed bus. This is DMI (Direct Media
Interface) on traditional two-package platforms, but single-package
Haswell LP variants use OPI (On-Package Interconnect) instead.
Since OPI is not routed through the mainboard, most link parameters are
static and cannot be changed. OPI self-initializes on boot, anyway.
However, DMI needs to be initialized in firmware. On Haswell, the MRC
initializes the physical DMI link, but things like topology and power
management need to be configured as well. And we don't do that properly.
We enable ASPM on the PCH side of the DMI link, but not on the SA side.
Both sides need to use the same settings, so enable DMI ASPM on the SA.
Clearing the error status bits needs to be done on all Haswell variants.
Tested on Asrock B85M Pro4, still boots.
Change-Id: Ie97ff56eec9f928cfd2d5d43a287f3e0d2fbf3cf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Looks like no one really knows what this bit would be useful for, nor
when it would need to be set. Especially if coreboot is setting it even
on PCI *Express* bridges. Digging through git history, nearly all
instances of setting it on PCIe bridges comes from i82801gx, for which
no reason was given as to why this would be needed. The other instances
in Intel code seem to have been, unsurprisingly, copy-pasted.
Drop all uses of this definition and rename it to avoid confusion. The
negation in the name could trick people into setting this bit again.
Tested on Asrock B85M Pro4, no visible difference.
Change-Id: Ifaff29561769c111fb7897e95dbea842faec5df4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Tested with BUILD_TIMELESS=1, Facebook fbg1701 remains identical.
Change-Id: Ie53a61c0ebb71bd7f2f9e931c175f35c3646ac6b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43930
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the obscure path in source code, where ACPI S3 resume
was prohibited and acpi_resume() would return and continue
to BS_WRITE_TABLES.
The condition when ACPI S3 would be prohibited needs to be
checked early in romstage already. For the time being, there
has been little interest to have CMOS option to disable
ACPI S3 resume feature.
Change-Id: If5105912759427f94f84d46d1a3141aa75cbd6ef
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This applies what commit 79572e4f32f844f60338d1aafdba6b94f4111a5c does
to the devicetree settings of amd/mandolin.
Change-Id: I6cc0a2b60b13a809016225caf3c89f730deb4ce0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Since there aren't any other variants, we can move things between the
devicetree and the overridetree.
Built with BUILD_TIMELESS=1, resulting coreboot.rom does not change.
Change-Id: I54aac67237a3850dbf11f58bd41aba87505214f3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43927
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ief8d53b79918d4d68bf10650ff796a27b67d862b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43921
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Built with BUILD_TIMELESS=1, resulting coreboot.rom does not change.
Change-Id: I655bc7576e8ff48258a2a19387e01372f4bbea3d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
Todor is created to take the place of terrador therefore
copying terrador content into todor's setup.
BUG=b:162110806
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_TODOR
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I63151728a04f2252ca8a77158a2656ad8b1e1b51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Create the todor variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
In addition,
* sort the variant names in alphabetical order.
* todor uses the same config options as terrador.
BUG=b:162110806
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_TODOR
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I7aa7acf1f3c3cc14b92ded05d5868818a627a432
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Use the common driver to configure the GPIOs on the Delta Lake
platform as done for Tioga Pass in commit 89d2aa0. The GPIO
settings are dumped by inteltool with original UEFI firmware,
then use intelp2m to generate header file.
TEST=Dump GPIO settings by Intel ITP and check if match gpio.h.
Change-Id: I8005d4caa2d87b6831099bfec3a40246224f3cb5
Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
All boards disable PIRQs, except purism/librem_bdw. Since IRQ0 is
invalid and modern OSes don't use PIRQ routing, disable the PIRQs.
Change-Id: I93b074474c3c6d4329903cab928dc41e1d3a3fb3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
All boards disable PIRQs. They aren't used on modern OSes anyway.
Change-Id: I1351fd4a3910e8cf2e9afe51dc2e82c7464de403
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I522dc7287c85b304f6fc62c0c554e4d062c3c61c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner
|
|
Simplify if-statements and use is_dev_enabled() where possible.
Change-Id: Ieeec987dc2bfe5bdef31882edbbb36e52f63b0e6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43899
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simplify if-statements and use is_dev_enabled() where possible.
Change-Id: I744939bee3d51ac25c1cc2dcd3359fe571c9e408
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43898
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simplify if-statements and use is_dev_enabled() where possible.
Change-Id: I791273e5dd633cd1d6218b322106e2f62a393259
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43897
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 6f739184dd153e0f7c3fa42990e008578b51b2c1.
Fixes compiling the SMMSTORE driver.
Change-Id: I3b4d4063ded50529bea48f8d865c1689fe9e26d1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create the eldrid variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:162115131
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_ELDRID
Signed-off-by: MiceLin <mice_lin@wistron.corp-partner.google.com>
Change-Id: I1cd07ee7a87335e1e0b51d65c26bffc3bc46037c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
BUG=b:161366241
TEST=Build & boot Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ied7789e9315c75174df9a686c831c5a969ce3bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Because there was a lot of discussion about the size increase,
I also looked at the impact of calling the get_spi_bar() function
vs reading spi_base directly and just not worring about whether
or not spi_base was already set.
Using the spi_base variable directly is 77 bytes bytes for all 6
functions. it's roughly double the size to call the function at
153 bytes. This was almost entirely due to setting up a call stack.
If we add an assert into each function to make sure that the spi_base
variable is set, it doubles from the size of the function call to
333 bytes.
For my money, the function call is the best bet, because it not only
protects us from using spi_base before it's set, it also gets the
value for us (at least on x86, on the PSP, it still just dies.)
BUG=b:161366241
TEST: Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0b0d005426ef90f09bf090789acb9d6383f17bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Mark that psp_verstage is running in userspace so that it won't run
the code in dcache_clean_all() and hang the system.
BUG=b:161554141
TEST=Run board through a bunch of recovery cycles.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I936dcec18a2be9ec8636ce77bb0954f4fc58153e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Make an empty macro for dcache_apply_all for code running in userspace
so that we don't hang the system.
BUG=b:161554141
TEST=Run board through a bunch of recovery cycles.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I3dc0f40dfe4d4a699528068154eee2d3c23d3d74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This lets code that run in userspace notify coreboot of that fact so
things that can't run in userspace can be excluded.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4da414bc96cfcf0464125eddc6b3f3a7b4506fcf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43784
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The over-current pin mapping matches the board schematics.
Change-Id: I23fd208680dcb52f5adaa144f00cb46bc7a21b91
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Neither the family 17h model 10-1Fh PPR nor the internal FSP source
seems to have the mapping of the USB OC pins to the four bit values, so
this is based on the information from the family 15h model 70-7Fh BKDG
which also corresponds to what I'd have expected here.
BUG=b:162010077
Change-Id: I581ef1d730e9d729d9849d7e73ef1c1b67b2c4cf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some smart battery patches have been backported to the ChromeOS 4.19 kernel,
and userspace can now access smart battery data from sysfs instead of using
the hacky ectool instead.
Also change all space indents into tab indents while we're here.
BUG=chromium:1047277
TEST=confirmed a /sys/class/power_supply/sbs-i2c device shows up
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I43687e63e4c1a7756c117129ced20749afc1b9e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Building depthcharge master currently fails as depthcharge commit 74ca8ae5
(depthcharge: Hide dev mode timeout description) changed the function signature
according to vboot commit 59fd331b (vboot/ui: pass timer_disabled to
vb2ex_display_ui()), which is not yet present in the vboot checkout:
$ make
[…]
CC drivers/ec/vboot_auxfw.depthcharge.o
src/drivers/ec/vboot_auxfw.c: In function 'display_firmware_sync_screen':
src/drivers/ec/vboot_auxfw.c:117:5: error: too many arguments to function 'vb2ex_display_ui'
vb2ex_display_ui(VB2_SCREEN_FIRMWARE_SYNC,
^~~~~~~~~~~~~~~~
In file included from /dev/shm/coreboot-1/3rdparty/vboot/firmware/include/vb2_api.h:18,
from src/drivers/ec/vboot_auxfw.c:17:
/dev/shm/coreboot-1/3rdparty/vboot/firmware/include/../2lib/include/2api.h:1262:13: note: declared here
vb2_error_t vb2ex_display_ui(enum vb2_screen screen,
^~~~~~~~~~~~~~~~
So update the submodule pointer from commit 68de90c7 (Allow building for
non-CrOS environments) to commit ed23c084 (Reset EC when transitioning to dev
mode).
This brings in 7 new commits.
Change-Id: Icd5408fb824fc5da470774b7f493b916dff17832
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
LPDDR4x DRAM table for burnet/esche:
[1] = "sdram-lpddr4x-H9HCNNNCPMALHR-4GB"
[2] = "sdram-lpddr4x-MT53E1G32D4NQ-4GB"
[3] = "sdram-lpddr4x-K4UBE3D4AA-MGCL-4GB"
[4] = "sdram-lpddr4x-H9HCNNNCPMMLXR-NEE-4GB"
BUG=b:161768221,b:159301679
BRANCH=master
TEST=emerge-jacuzzi coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: Ida7ab877c3f7e10a67680b69a1d724ec734d2928
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
