| Age | Commit message (Collapse) | Author |
|---|
|
This slightly streamlines integrating the vboot2 library and
prepares for merging verstage and bootblock on selected devices.
Change-Id: I2163d1411d0c0c6bf80bce64796e1b6a5a02b802
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Otherwise it won't build.
Change-Id: If9e1435b0dc8bfe220b3a257976e928373fbc9a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Without this, building with COLLECT_TIMESTAMPS fails.
Fixes a mistake during upstreaming in commit 0de8820.
Change-Id: Ie56bd38649a821f6b22a1e5dee5f50ef397035fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I1d61971f1458ca7e4257abb6a9c2aa15ac08e1d0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10001
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The offset of 0x2000 was for a configuration with two separate OxPCIe
chips. The setup we support is a single chip with 8 UART pors.
Change-Id: If4be046a14464af7b90b86aca5464c6b3400dffc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8780
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move the GPI interrupt routing selection between SMI/SCI from
mainboards to southbridge. There is speculation if this is all
just legacy APM stuff that could be removed with a followup.
Change-Id: Iab14cf347584513793f417febc47f0559e17f5a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7967
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
For lenovo/x201, this also changes GPI_ROUT (0xb8-0xbb)
programming to use GPI1 between SCI/SMI modes, while
previous programming was for GPI12.
Change-Id: I3ac0feaa1d10c8f0e53a5fa5af72366503bb5d2d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8656
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The mips toolchain used by coreboot so far comes from Chrome OS chroot
and is built explicitly for little endian code generation.
Other flavors of MIPS toolchain usually generate big endian code by
default and require command line options to switch to little endian
mode.
This patch adds another variable to the set of compiler flags examined
to determine compiler compatibility. This results in adding another
nested for loop in test_architecture(). To avoid the need to break
from different levels of nesting, processing of the successful case is
taken out from test_architecture().
With this change the Mentor Graphics provided mips GCC toolchain is
accepted by xcompile, resulting in the following output:
ARCH_SUPPORTED+=mips
SUBARCH_SUPPORTED+=mips mipsel
CC_mips:=mips-linux-gnu-gcc
CFLAGS_mips:= -Wno-unused-but-set-variable -fno-stack-protector -Wl,--build-id=none -mno-abicalls -fno-pic -EL
CPP_mips:=mips-linux-gnu-cpp
AS_mips:=mips-linux-gnu-as
LD_mips:=mips-linux-gnu-ld
NM_mips:=mips-linux-gnu-nm
OBJCOPY_mips:=mips-linux-gnu-objcopy
OBJDUMP_mips:=mips-linux-gnu-objdump
READELF_mips:=mips-linux-gnu-readelf
STRIP_mips:=mips-linux-gnu-strip
AR_mips:=mips-linux-gnu-ar
Change-Id: I4da384b366880929693c59dc0e1c522b35c41bea
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9997
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Declaring function variables local improves bash scripts' robustness.
Cosmetic changes among other things include renaming variables from
plural to singular and vice versa as appropriate, and replacing spaces
with tabs.
Tested by confirming that sorted output generated by
util/xcompile/xcompile is the same before and after the change.
Change-Id: I7305b3a4e45478ed3653b7d915dde4f83965f6c1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9996
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Make fails to update .xcompile in case there is an mv alias preventing
silent overwrites of existing files. To avoid ambiguity, invoke mv
from standard location.
While we are at it, drop the code creating a unique .xcompile instance
before copying it into destination: this was done for the case of
running multiple independent make processes in parallel, but there is
a problem with this approach with multiple processes copying their
unique copies into the same destination file.
The tool running multiple make invocations in parallel should
explicitly invoke xcompile first.
Change-Id: Iedc5e288fbcc5dfc18ce39de5c067bb869a13275
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9994
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change switches all southbridge vendors and southbridges
to be autoincluded by Makefile.inc, rather than having to be
mentioned explicitly in southbridge/Makefile.inc or in
southbridge/<vendor>/Makefile.inc.
In order to be able to drop southbridge/amd/Makefile.inc, some
scattered source files had to be moved to a southbridge/amd/common
directory, in accordance to what we are doing on other architectures
already.
This means, vendor and southbridge directories are now "drop
in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree components to be
built with a given coreboot version (given that the API did not
change).
Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9796
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The new -Og optimization level is only available in gcc version 4.8
or higher. Clang fails on this too as of now (with "invalid integral
value 'g' in '-Og'"). The gain of this does not outweigh this
limitation at all. The flag was added in 0e53931.
Change-Id: I2b2dfc786369653d768f25be94b53329451ae1b4
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: http://review.coreboot.org/9999
Tested-by: build bot (Jenkins)
Reviewed-by: Sol Boucher <solb@chromium.org>
|
|
1. change mmu granule size from 64KB to 4KB
2. correct level 1 translation table creation logic
3. automatically calculate granule size related macros
BRANCH=none
BUG=none
TEST=boot to kernel on oak board
Change-Id: Ic62c7863dff53f566b82b68ff1d1ad9ec5d0698d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e5de7d942e42a8202fb879ce64b871864b1b9d38
Original-Change-Id: I78d7838921fa82a670e18ddc2de6d766dc7a2146
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/266010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10010
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
1. change mmu granule size from 64KB to 4KB
2. correct level 1 translation table creation logic
3. automatically calculate granule size related macros
BRANCH=none
BUG=none
TEST=boot to kernel on oak board
Change-Id: I9e99a3017033f6870b1735ac8faabb267c7be0a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f18c4d5d9902f2830db82720c5543af270a7e3c
Original-Change-Id: Ia27a414ab7578d70b00c36f9c063983397ba7927
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265603
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10009
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Long auto-increment access cannot be used when our initial address is
misaligned or when our terminal address is misaligned on write
operations.
BUG=chrome-os-partner:38224
TEST=Verify host command functionality on cyan.
BRANCH=None
Change-Id: Ieba0e8e05dabd44a28c63d5d56a2a634c2d349bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7237c8df027ae70a38478846ff3d5ce97543ff1
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: Id709ca92cc386f9ea5b2a1139733961e1bc59354
Original-Reviewed-on: https://chromium-review.googlesource.com/266653
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9987
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables on storm the recently introduced 'console buffer
dump on reboot' capability.
BRANCH=none
BUG=chromium:475347
TEST=generated storm image with serial console disabled and both rw
firmware A and B sections corrupted. Programmed the new image on
an SP5 device and rebooted it. Observed the device dump cbmem
console buffer to the serial output, terminating with
VB2:vb2_fail() Need recovery, reason: 0x3 / 0xa
Reboot requested (1008000a)
Saving nvdata
SF: Detected S25FL128S_256K with page size 10000, total 2000000
and the LED ring started flashing indicating recovery mode.
Change-Id: Idb50c86f59f393c783ccbc15de8f5564e2a1b38e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ec88001b152bb9f1d7268b83367131b004816f8
Original-Change-Id: I9345eeb4d375f42fb1e4c617495b63b308ce51d9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9986
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
To allow an OS to run in non-secure mode:
- Set all peripherals and system components non-secure except SOTP and TZPC.
- Set all memory non-secure (ROM, SRAM, DDR, flash).
- Enable A9 access to entire M0 address space except M0 ROM.
BUG=chrome-os-partner:37533
BRANCH=broadcom-firmware
TEST=boot kernel from usb stick
Change-Id: I3bbd288863923011ff1413be353ac4b178ffdd07
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6de56bbe73ed8d87ad572da711a193985ee68e3a
Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/212735
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: Ibac7de03a72a98fbd95659d0113833049b4871a5
Original-Reviewed-on: https://chromium-review.googlesource.com/266593
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The new function can be compiled in only when serial console is
disabled.
When invoked, this function initializes the serial interface and dumps
the contents of the CBMEM console buffer to serial output.
BRANCH=none
BUG=chromium:475347
TEST=compiled for different platforms with and without serial console
enabled. No actual test of this function yet.
Change-Id: Ia8d16649dc9d09798fa6970f2cfd893438e00dc5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a38a8254dd788ad188ba2509b9ae117d6f699579
Original-Change-Id: Ib85759a2727e31ba1ca21da7e6c346e434f83b52
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9984
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It returns TPM_E_NO_DEVICE for all calls.
BRANCH=None
BUG=None
TEST=manual MOCK_TPM=1 emerge-foster coreboot, and
coreboot can boot to kernel
Change-Id: Id7e79b58fabeac929b874385064b2417db49a708
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a9a91a65af115657e7317754eda931120750c56d
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: I8dcf0db14cf2bc76c67a3bd7f06114e70e08764d
Original-Reviewed-on: https://chromium-review.googlesource.com/264946
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9983
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In the spirit of include what you use actually #include
the header necessary for fmap calls.
Change-Id: I7acede51d7139234c0520281799dad3a8d33454f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9968
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The value of SMM_TSEG_SIZE was equal to SMM_RESERVED_SIZE. This caused
the install_permanent_handler() function to fail. Changed the value to
0x800000, which is already used as default in smm_region_size() in case
SMM_TSEG_SIZE is 0.
Change-Id: I4ff3568aefd4729a98c1777a2cae2a4715afbc2f
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/9961
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
CPTR_EL3 and CPACR_EL1 are the registers for controlling the trap level
and access right of the FPU/SIMD instructions. Need to save/restore them
in every power cycle to keep the settings consistent.
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I96fc0e0d2620e72b6ae2ffe4d073c9328047dc01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 73e8cc8f25922e7bc218d24fbf4f7c67e15e3057
Original-Change-Id: I51eed07b1bb8f6eb2715622ec5d5c3f80c3c8bdd
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/266073
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9981
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Implement the individual core powerdown sequence as per
Cortex-A57/A53/A72 TRM.
Based-on-the-work-by:
Varun Wadekar <vwadekar@nvidia.com>
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I4719fcbe86b35f9b448d274e1732da5fc75346b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b6bdcc12150820dfad28cef3af3d8220847c5d74
Original-Change-Id: I65abab8cda55cfe7a0c424f3175677ed5e3c2a1c
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265827
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9980
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This patchs introduces level specific data cache maintenance operations
to cache_helpers.S. It's derived form ARM trusted firmware repository.
Please reference here.
https://github.com/ARM-software/arm-trusted-firmware/blob/master/
lib/aarch64/cache_helpers.S
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: Ib58a6d6f95eb51ce5d80749ff51d9d389b0d1343
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3d1a16bd0089740f1f2257146c771783beece82
Original-Change-Id: Ifcd1dbcd868331107d0d47af73545a3a159fdff6
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9979
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Same as commit fe0eac5f416e "arm64: Allow cpu specific early setup", we
need the same in secmon too.
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: I5b1347880306a95f99233db12cb99547bad4aa8c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1f70fd940ff92eb5b8991cd777c2894b7a9633cf
Original-Change-Id: Ifce5a6d636051e7a447d055c8e09ed4e29e091c7
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265825
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Call arm64_cpu_early_setup to allow cpu-specific initialization to be
performed. Also, add support for setting SMPEN bit for cortex a57
within arm64_cpu_early_setup.
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully and SMP works for foster
Change-Id: Ifa4e6134dbce3ad63046b3dd9b947c3d9134d5e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fe0eac5f416efcf9f7b05388a17444205a8352c0
Original-Change-Id: I28a05a20e6adf084cd0bf94bdd0c3b492632107c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262993
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9977
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
dd doesn't recognise hex number. the commit introducing this:
f21b657 build system: improve portability by not relying on extraordinary dd options
Change-Id: Ie0df3eb00fa2ba5d7bbb8218e24b864cbdd07c3a
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/9944
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This test outlives its usefulness and only slows down commits.
We can now be confident that out-of-tree builds work because
some of our automated builders do them regularly.
Change-Id: I7c27e613ddd16f7bacbd4e232596b8a76e0c3301
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
bzip2 --version |grep -c will wait for input on stdin. ./buildgcc will hang because of this.
Add `cat /dev/null |` close the stdin.
Change-Id: I2a8b08a4d90ca7a89705923d5b68ba6ac13f29b3
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I16e7c376fe6d79676734df325ac61449bb2d0871
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9982
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Because cbfs_add_entry_at() previously *assumed* it would have to create a
trailing empty entry, it was impossible to add files at exact offsets close
enough to the end of an existing empty entry that they occupied the remainder
of its space. This addresses the problem by skipping the step of creating the
trailing empty entry if doing so would place it at the start offset of whatever
already followed the original empty section.
BUG=chromium:473511
TEST=Run the following commands:
$ ./cbfstool test.image create -s 0x100000 -m arm
$ dd if=/dev/zero of=twok.bin bs=1 count=2048
$ ./cbfstool test.image add -t 0x50 -f twok.bin -n at_end -b 0xff7c0
$ ./cbfstool test.image add -t 0x50 -f twok.bin -n near_end -b 0xfef80
$ ./cbfstool test.image print
There shouldn't be any assertions, and the output should be:
test.image: 1024 kB, bootblocksize 0, romsize 1048576, offset 0x40
alignment: 64 bytes, architecture: arm
Name Offset Type Size
(empty) 0x40 null 1044184
near_end 0xfef40 raw 2048
at_end 0xff780 raw 2048
BRANCH=None
Change-Id: Ic8a6c3dfa4f82346a067c0804afb6c5a5e89e6c8
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 1bbd353fddc818f725e488e8f2fb6e967033539d
Original-Change-Id: I15d25df80787a8e34c2237262681720203509c72
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263809
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/9938
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This enables more warnings on the cbfstool codebase and fixes the
issues that surface as a result. A memory leak that used to occur
when compressing files with lzma is also found and fixed.
Finally, there are several fixes for the Makefile:
- Its autodependencies used to be broken because the target for
the .dependencies file was misnamed; this meant that Make
didn't know how to rebuild the file, and so would silently
skip the step of updating it before including it.
- The ability to build to a custom output directory by defining
the obj variable had bitrotted.
- The default value of the obj variable was causing implicit
rules not to apply when specifying a file as a target without
providing a custom value for obj.
- Add a distclean target for removing the .dependencies file.
BUG=chromium:461875
TEST=Build an image with cbfstool both before and after.
BRANCH=None
Change-Id: I951919d63443f2b053c2e67c1ac9872abc0a43ca
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 49293443b4e565ca48d284e9a66f80c9c213975d
Original-Change-Id: Ia7350c2c3306905984cfa711d5fc4631f0b43d5b
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/257340
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9937
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fastboot data in Intel FSP project is printed by hexdump32() in dword
length. So the data length needs to be divided by 4 when printing it.
Change-Id: I959d538bd6e60282882dd138045cc730b4bd8159
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/9976
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This reverts commit d555d5a2b5364d2eeb13e2ace00844c7b6321bb9.
It produces too much clutter, and is not particularly useful.
Change-Id: I62268a215a22a5cc76a10cdcfcae86349b466963
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/9990
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add the option to add a release year to each mainboard to
get a sense of how old the hardware is.
Change-Id: Id43c80fdf8bf65241b2be92678616d1774529f8c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9945
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Prepare for FSP 1.1 integration by moving the FSP to a FSP 1.0 specific
directory. See follow-on patches for sharing of common code.
Change-Id: Ic58cb4074c65b91d119909132a012876d7ee7b74
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9970
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In commit b0d8f5e9 I moved the call to cbmem_initialize()
in the CONFIG_EARLY_CBMEM_INIT case to the very beginning of
ramstage. However, that caused an issue in the ordering of the
cbmem console driver in that it expects cbmemc_init() to be
called prior to cbmemc_reinit(). Therefore, ensure console
is called as the first thing even if some time is lost w.r.t.
timestamp tracking.
Change-Id: I42137d28116e0bccb9235f4e3f394d4fd8b84e37
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9933
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Kconfig options pertaining cbmem console in the preram
environment no longer make sense with the linker script
changes. Remove them and their usage within cbmem_console.
Change-Id: Ibf61645ca2331e4851e748e4e7aa5059e1192ed7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9851
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This enables its _size variable (a macro) to work even when
the console has no location assigned to it in the chip/board's
memlayout.ld.
Since _size == 0, the code will do the right thing.
Change-Id: I6b42ed0c5c3aaa613603680728b61cbdb24c4b61
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9973
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
To simplify browsing the "Supported hardware" list, I added Release year
for the hardware from asus, asrock, gigabyte, msi, via, tyan, intel,
lenovo, apple, jetway and hp. Still several models and manufacturers to
add information to. This is more of a proof-of-concept.
The "Release year" will be shown in the wiki page.
Change-Id: I6bc14ed06ac7c6b3c9f054b49f08cb9b3dc47947
Signed-off-by: Mathias Friman <mathias@workplays.se>
Reviewed-on: http://review.coreboot.org/9963
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Add a new mainboard based on AMD's Family 15 Model 30 processor.
TEST: Lamar will boot DOS, Ubuntu 14.10 and Windows 7.
Change-Id: I2f73c396247239d54f978846e8958950697d7464
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5968
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
By design, the imd library still provdes dynamic growth so that
feature is consistent. The imd-based cbmem packs small allocations
into a larger entry using a tiered imd. The following examples show
the reduced fragmentation and reduced memory usage.
Before with dynamic cbmem:
CBMEM ROOT 0. 023ff000 00001000
aaaabbbb 1. 023fe000 00001000
aaaabbbc 2. 023fd000 00001000
aaaabbbe 3. 023fc000 00001000
aaaacccc 4. 023fa000 00002000
aaaacccd 5. 023f9000 00001000
ROMSTAGE 6. 023f8000 00001000
CONSOLE 7. 023d8000 00020000
COREBOOT 8. 023d6000 00002000
After with tiered imd:
IMD ROOT 0. 023ff000 00001000
IMD SMALL 1. 023fe000 00001000
aaaacccc 2. 023fc000 00001060
aaaacccd 3. 023fb000 000007cf
CONSOLE 4. 023db000 00020000
COREBOOT 5. 023d9000 00002000
IMD small region:
IMD ROOT 0. 023fec00 00000400
aaaabbbb 1. 023febe0 00000020
aaaabbbc 2. 023feba0 00000040
aaaabbbe 3. 023feb20 00000080
ROMSTAGE 4. 023feb00 00000004
Side note: this CL provides a basis for what hoops one needs to
jump through when there are not writeable global variables on
a particular platform in the early stages.
Change-Id: If770246caa64b274819e45a26e100b62b9f8d2db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9169
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
elog breaks the build if ELOG_FLASH_BASE isn't configured -
and CHROMEOS isn't enabled, since with Chrome OS builds, it
just uses fmap to find out the base.
So it makes sense to enable it on all Chrome OS builds - if
the code never uses it, the linker will drop it soon enough.
Change-Id: I7ee129fadf75caf15fb9bd32b0acf6f7d9d015d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9965
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of switching off the LED ring for the normal boot path, turn
it on with the dedicated pattern, indicating that the device firmware
has started executing.
BRANCH=storm
BUG=chrome-os-partner:39044
TEST=program the new firmware on an SP5 device and verify that the new
'normal boot' pattern is displayed in all following scenarios:
- power up the device (the pattern shows within the first second)
- boot the device to bash prompt and restart.
- press the recovery button and reboot the device. Once the LED ring
shows the 'recovery button pressed' pattern, release the recovery
button.
Change-Id: Iedd66d2575ad587af77e35d23efb22a83a92858b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 092358bd17a323d0bd2fec555f43cb587486bbec
Original-Change-Id: I24de45326eab83b57bcf16b5598388f81c7d0f00
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265536
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9923
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It became necessary to indicate the beginning of the normal boot
process. This patch adds a new pattern, a slow (over 2 seconds) fade
in into the 0, 87, 155 color.
BRANCH=storm
BUG=chrome-os-partner:39044
TEST=tested by the next patch.
Change-Id: Idd977688e5aa2cc55fc295072c0766526ae95016
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 577c8bd6f8c69073cfdd7acd4a87e7ae603d48e6
Original-Change-Id: I9aff3f4558e733ff2e47206075533556e400f183
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265535
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9922
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=storm
BUG=chrome-os-partner:24786
TEST=verified mmu.pagetable.list output for Storm:
_______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________|
C:00000000--00000FFF| | | | | | | | |
C:00001000--000FFFFF| A:00:00001000--000FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:00100000--29FFFFFF| A:00:00100000--29FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:2A000000--2A05FFFF| A:00:2A000000--2A05FFFF| ns| 00| 00001000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:2A060000--2A0FFFFF| A:00:2A060000--2A0FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:2A100000--3FFFFFFF| A:00:2A100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:40000000--59FFFFFF| A:00:40000000--59FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:5A000000--5A1FFFFF| A:00:5A000000--5A1FFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:5A200000--7FFFFFFF| A:00:5A200000--7FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:80000000--FFFFFFFF| | | | | | | | |
Change-Id: I08a5094b2da9d67244c94984e2da14399e477b01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f137a589434b09055e6b9d32907e662e6c296502
Original-Change-Id: Ia2deab1cf8f08c4ba5a5b6dbe4c4ebf29c9df480
Original-Signed-off-by: Vikas Das <vdas@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/253801
Original-Tested-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Deepa Dinamani <deepad@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9920
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
After testing on a final assembly the PD team adjusted the wipeout
request and recovery request modes' colors.
BRANCH=storm
BUG=none
TEST=verified new colors while booting an SP5 device in recovery mode
Change-Id: I9bd2dac63b99140573533c2cda8eaa9213478ab1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41c34a619dc0317af67907f18ee844c71a73d623
Original-Change-Id: Iab84710ebdeed35ddd4a8a163bbb6b8ac9cdb799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262602
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Modify colors as suggested by product review folks. This is not final,
to make it easier to identify RGB locations in the hex dumps, express
their values in decimal as opposed to hex.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified new all three color schemes while pressing the recovery
button at boot for 20 seconds.
Change-Id: I7461acd7004e3d10cba6665a9bfe25ec8aa6f3ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a075824a1954eb5d1b65ce887304924724a6d21
Original-Change-Id: I7f5968e361333572fd1f84aa11b7150194ad902a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261690
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Storm and whirlwind devices should leave developer mode as soon as
recovery is requested.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applies observed desired behavior on
SP5
Change-Id: I3e8e481f85cd067eff4fe2049b8aa47e09f6d63e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c6dbafc16edb11ec687359b25098ce8a1b055b91
Original-Change-Id: Iac6fa62229556bc7a6960d7f1630d37570ba72c4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261621
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The whirlwind device is using a button instead of the switch to enable
dev mode.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applied it is possible to enable and
disable dev mode on Whirlwind and the mode persists over reboots.
Change-Id: I6d31c8429ea0515bea2b7d707325d9092487048a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 495bd07e3a1d6c587a5f01efa2801d2c4e7edbe8
Original-Change-Id: I8879833ca13074e8275393c3b98df06d56a5361d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261416
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9875
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The originally loaded blinking program was written to allow gradual
change in LED brightness, which required controlling each LED with its
own engine. In fact there is no need in gradual brightness changes
when the firmware is controlling the ring. This allows to control all
LEDs by one engine, making the code simpler and more robust (no need
to synchronize the three engines any more).
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified that recovery boot WW ring patterns work as expected.
Change-Id: I89d231fb61693f4e834d8d9323ae5a7ddd149525
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 19809cf8120df8865da9b5b9e7b8e932334bf4b5
Original-Change-Id: I41038fd976dc9600f223dc0e9c9602331baf68f9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9873
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The two controllers on the ring are programmed independently, and if
the second controller is running the old pattern while the first one
was loaded with a new pattern, there is a window of when the two
unrelated patterns might interact.
To avoid this shut down execution on both controllers before starting
downloading the new pattern code.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified recovery/wipeout LED ring behavior did not change.
Change-Id: I163f2983d414fe839208054ae3e9025663a46aeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3502ca6b119c033855b45388e7b782d35cfdd82b
Original-Change-Id: I0f71f94a7e82f6c0e7f98d3aad1f93ece207248f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9872
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add compiled lp55231 code snippets to allow display certain patterns
when booting the device with the recovery button pressed.
As soon as the press is detected, the low intensify solid white
pattern is enabled. Holding recovery button long enough causes the
device transition between the wipeout requested and recovery requested
states, with the appropriate changes in the displayed pattern.
The patch also includes the source code for the LED controller as well
as instructions on how to compile and modify the code to result in
different colors, intensities, blink periods and duty cycles.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=reboot an SP5 device with the LED ring attached, keep the
recovery button pressed, observe the changes in the LED display
pattern while the device progresses through the boot sequence.
Change-Id: Ic7d45fc7c313b6d21119d4ae6adaeb4f46f7d181
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0fd6a5c0067d705197816629f41640a931d2f7cd
Original-Change-Id: Ib5cc5188c2eeedbba128101bf4092a0b9a74e155
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260670
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9870
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The patterns displayed on the LED ring while under the coreboot
control are not driven by the vboot, but by the board code instead,
The four distinct states of the LED display are:
- all off
- recovery button push detected, waiting for it to be released
- wipeout request pending - recovery button was pushed long enough
to trigger this request
- recovery request pending - recovery button was pushed long enough
to trigger this request.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=no functional changes
Change-Id: I38d9a3028013b902a7a67ccd4eb1c5d533bf071c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bdfff0e646283da6a2faaacf33e0179d2fea221c
Original-Change-Id: Ie279151b6060a2888268a2e9a0d4dc22ecaba460
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260649
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9868
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When in development environment, some SP5 devices might not have the
LED ring attached. They are still fully functional, but when booting
up are generating massive amount of i2c error messages. This patch
prevents accesses to non-existing lp55321 devices.
When loading the program into the device the vendor recommends 1 ms
delay when accessing the program control register. This patch
separates these accesses into a function and add a delay after every
access.
Another fix - advance the program address when loading multipage
programs.
Set the global variable register 3c, not used by coreboot programs, to
a fixed value. This will allow depthcharge to avoid re-initializing
the controller when not necessary.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=booted firmware on an SP5 with no LED ring attached, no excessive
error messages are generated, saw the default pattern displayed
when the recovery button is pressed during reset.
Change-Id: I6a2a27968684c40dae15317540a16405b1419e30
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e0b4c84aca27460db594da1faf627ddee56f399
Original-Change-Id: I10f1f53cefb866d11ecf76ea48f74131d8b0ce77
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260648
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The recovery switch on storm is overloaded: it needs to be pressed for
a certain duration at startup to signal different requests:
- keeping it pressed for 8 to 16 seconds after startup signals the need for
factory reset (wipeout);
- keeping it pressed for longer than 16 seconds signals the need for Chrome
OS recovery.
This patch adds a function to report the wipeout request status and
enables the new feature on Storm.
BRANCH=storm
BUG=chrome-os-partner:37219
TEST=verified that keeping the recovery button pressed between 8 and
16 seconds at startup results in the wipeout request generated
(crossystem 'wipeout_request' returns 1). Keeping the button
pressed for more than 16 seconds triggers recovery mode.
Change-Id: I17131593e12833866a22837271feb0e6989e6750
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c503ec13c2b096d4a21fb299c0dd0396f1d01e9
Original-Change-Id: Ic3678217906e56307d47378fa8a6defeb314084e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/259844
Reviewed-on: http://review.coreboot.org/9863
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The latest whirlwind requirements call for the need to indicate
different device states while it is still in coreboot (it could be
waiting for recovery or for factory reset trigger).
Initialize the LED ring when running on the SP5 hardware (which is the
first proper Whirlwind device).
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=when the device starts the LED ring gets shut down
Change-Id: I9dd0bca4849a2a8500322c84c7351aeef00d862e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24e4da56d4c43d03f235d0cfd5995ef235e6a2c5
Original-Change-Id: Ica37301aa27f35897d2bf467ae319fb5e68adc1d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258271
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9859
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a copy of the depthcharge ww ring driver implementation ported
into coreboot. The main differences are:
- direct use of the i2c driver instead of using the callback driver
description
- no dynamic memory allocation for the controller structures
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applied the LED ring gets
initialized to the default pattern at coreboot start.
Change-Id: I6902c8b76fc173ad2ec28b8cc94695e892df338a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eda24b78f8aff311dd6296d458bdfecf26c3d65a
Original-Change-Id: I5660dc3f255aab8fbe3a87041c72916a645c193b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/257730
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
abuild -x (we're running out of letters) builds with CHROMEOS enabled.
Change-Id: Ie9abd8aa999dd339aab113ff28c16671b2a17845
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9966
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
abuild only created compile.status for successful builds,
but sometimes it's helpful to easily identify all failed
builds of a full run:
$ grep -l failed coreboot-builds/*/compile.status
Change-Id: Ic90280fb2e8cff1f8f558a2e67ffad741beddbdf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9964
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Some compilers and linkers require a strict order or fail to find
all symbols.
Change-Id: I3f44bec1f0e21e7313a751fbc99c61c1aa9b7cf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9962
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For boards with MAINBOARD_HAS_CHROMEOS, we should also
state what kind of storage is available for vboot's
non-volatile data.
The flags are taken from the chromium repository and
have no effect with CHROMEOS disabled.
Change-Id: I1747ad26c8c7f6d4076740ec2800dbd52c5d6b3d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9952
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since CHROMEOS_VBNV_* are selected by mainboards, they
may be active without CHROMEOS being selected. In this
case, they should be a no-op.
Change-Id: I3b84e2a919ffaa809d713e72e5e4df7a7575e6b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9954
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Many chipsets were using a stage cache for reference code
or when using a relocatable ramstage. Provide a common
API for the chipsets to use while reducing code duplication.
Change-Id: Ia36efa169fe6bd8a3dbe07bf57a9729c7edbdd46
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8625
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
A tiered imd allows for both small and large allocations. The
small allocations are packed into a large region. Utilizing a
tiered imd reduces internal fragmentation within the imd.
Change-Id: I0bcd6473aacbc714844815b24d77cb5c542abdd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8623
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The imd (internal memory database) library provides a way to
track memory regions by assigning ids to each region. The implementation
is a direct descendant of dynamic cbmem. The intent is to replace
the existing mechanisms which do similar things: dynamic cbmem, stage
cache, etc.
Differences between dynamic cbmem and imd:
- All structures/objects are relative to one another. There
are no absolute pointers serialized to memory.
- Allow limiting the size of the idm. i.e. provide a maximum
memory usage.
- Allow setting the size of the root structure which allows
control of the number of allocations to track.
Change-Id: Id7438cff80d396a594d6a7330d09b45bb4fedf2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8621
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This fixes some compilation issues observed with CONFIG_CHROMEOS.
Nothing within the vbootX subdirectories is functional yet, but
a partial compilation within the chromeos direction works now.
Notable fixes: duplicate definitions and missing prototypes.
Change-Id: I53c7b6dcf06b8bcf41a8555094b48968c0740026
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9936
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
They were keyed to VBOOT_VERIFY_FIRMWARE which made them invisible
under some circumstances.
Change-Id: I61c56b4d245351fae0ec14f80bcd17ba93184651
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9956
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When RTC is not selected, return all 0.
Change-Id: I892a9489fc1d82fb8e61cf02666f797dc6412e05
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9955
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
RTC drivers now select RTC, so that code which depends on them
can implement fallback behavior for systems that lack the
hardware or driver.
Change-Id: I0f5a15d643b0c45c511f1151a98e071b4155fb5a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
They were already moved to src/lib/bootmode.c in
commit 5687fc9 Declare recovery and developer modes outside ChromeOS
Change-Id: Ia27a0c79baa364ce3779a8a699e9246d26d02ecb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9951
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Missed during upstreaming
Change-Id: Ifef4bb8a097a71244bdb648840cd64a812673107
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9950
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some recently upstreamed boards are missing this flag
Change-Id: I89d73970f23eed6ea127e620c38f9687b2f5b048
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9949
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The preprocessor flags that are manipulated in that line are
managed exclusively in CPPFLAGS since commit 58f73a69.
Change-Id: I2263401a292b4f7435659b24cf4f695a927015ef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9948
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When using qemu-armv7 to load coreboot.rom with the -kernel
flag the rom is offset by 0x10000. Therefore only allow
mappings within 0x10000 and 0x10000 + CONFIG_ROM_SIZE.
TEST= QEMU_AUDIO_DRV=none qemu-system-arm -M vexpress-a9 \
-m 1024M -nographic \
-kernel coreboot-builds/emulation_qemu-armv7/coreboot.rom
Change-Id: Ifec5761a7d54685f664c54efaa31949b8cc94bad
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9935
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of always loading romstage from cbfs provide a
way, similar to ramstage and payload, for other
program loaders to intervene. For now, only the cbfs
loader is consulted.
TEST=Booted to end of ramstage on qemu-armv7
Change-Id: I87c3e2e566d7a0723e775aa427de58af745ecdd5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9934
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia43291d0d41e565f2442b625387f3ffde9a98d32
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9947
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ie49e235b81ca0cd7aff05ceed522d9df1d5403b0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9946
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It is necessary to trigger console buffer contents dump on reset.
Let's make sure all vboot resets are routed through the same function.
BRANCH=none
BUG=chromium:475347
TEST=built and booted storm
Change-Id: I0d8580fb65417ba4b06dfae763dd6455afc8fc26
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9788e2043cb1bd5df7e30574f7df4de4f25caa0d
Original-Change-Id: Iafca416700c51a0546249438ca583a415a1ca944
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265292
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9931
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable auto entry and auto exit self-refresh.
Configure entry idle time to 16x long count sequences.
Where a long count sequence is 1024 cycles.
The idle entry configuration is based on 32x of the DLL lock time (512 cycles).
A conservative setting to help minimize self-refresh enter/exit thrashing.
BUG=chrome-os-partner:36456
BRANCH=broadcom-firmware
TEST=When enable configuration CYGNUS_SDRAM_TEST_DDR,
print on console:
sdram initialization is completed.
test ddr start from 0x60000000 to 0x80000000
...
test ddr end: fail=0
Translation table is @ 02004000
Mapping address range [0x00000000:0x00000000) as uncached
Change-Id: Ibad220429fd52ead2933db03bec1a555f9385e53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3768f82ca268fb854f8c4753916518a1efdf887d
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/212125
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Signed-off-by: Icarus Chau <ichau@broadcom.com>
Original-Change-Id: Icac1e12745d048b32e1804a546f6b49c8b5953c0
Original-Reviewed-on: https://chromium-review.googlesource.com/265862
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9930
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:37533,chrome-os-partner:35814
BRANCH=broadcom-firmware
TEST=bootblock initialize Cygnus HW successfully
Change-Id: I93b97d7b26f6bacd8fab3d6bc52ec52e92e91a43
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8679570c6607ed6964f46df618fe8d0d22fcb2c0
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/211695
Original-Tested-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Commit-Queue: Corneliu Doban <cdoban@broadcom.com>
Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com>
Original-Change-Id: I62d354bce71aba8d5074f5385616a1265bd604df
Original-Reviewed-on: https://chromium-review.googlesource.com/265861
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9929
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently (EVT) this is a pullup resistor on the board (i.e. always in
dev mode). Future builds it will be pull down and require servo or HW
modification to control. Either way, this change means the FW should
acknowledge it.
BUG=chrome-os-partner:38663
TEST=Manually verified that servo devmode switch toggles this GPIO. requires FW signing to verify GPIO is observed and dev mode active.
BRANCH=none
Change-Id: Ib05216992abc5f6175fe7395471bd379f185b61f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 702c8d222a3d19d6b8db89d122dcdf594c85da99
Original-Change-Id: I1d0f31819b9f7a1ab63deac52bcaf0b996499b0c
Original-Reviewed-on: https://chromium-review.googlesource.com/263529
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Jonathan Dixon <joth@chromium.org>
Original-Commit-Queue: Jonathan Dixon <joth@chromium.org>
Reviewed-on: http://review.coreboot.org/9928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disable and enable GIC before switching off a CPU and after bringing
it up back respectively.
BUG=None
BRANCH=None
TEST=Compiles successfully and psci commands work for ryu.
Change-Id: Ib43af60e994e3d072e897a59595775d0b2dcef83
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5271d731f0a569583c2b32ef6726dadbfa846d3
Original-Change-Id: I672945fcb0ff416008a1aad5ed625cfa91bb9cbd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265623
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9926
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully for ryu.
Change-Id: Iaff771cdd1c8b6a7447e1e86aa35ea3ed40b17ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2856d3d4f4ab4e56259d36769d9cbb0ec9642951
Original-Change-Id: I702d7c6fa70b1af02c16b874f9de22c6b04a9100
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265624
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9927
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
PSCI_CPU_OFF is SMC32 call, there is not SMC64 version. Register SMC32
and SMC64 types of PSCI calls.
BUG=None
BRANCH=None
TEST=Compiles successfully and CPU off works fine with PSCI command.
Change-Id: I8df2eabfff52924625426b3607720c5219d38b58
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9228c07f9d9a4dd6325afb1f64b41b9b8711b146
Original-Change-Id: I2f387291893c1acf40bb6aa26f3d2ee8d5d843ea
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265622
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9925
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We support SMC32 calls from AARCH64, however we do not support SMC32
calls from AARCH32. Reflect this policy in the code by using
appropriate names for exception type check in SMC handler.
BUG=None
BRANCH=None
TEST=Compiles successfully and able to turn CPU1 on and off using psci commands.
Change-Id: Ifc3c9e2fe0c4e6e395f2647769a2d07f5f41f57f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbaf712c2c45273a9eb0b0808a0d4d0630023fdd
Original-Change-Id: I133b2c0bbc4968401a028382532bd051d6298802
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265621
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9924
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CNTFRQ_EL0 can only be set in highest implemented exception level.
Save and restore CNTFRQ_EL0 for secondary cpus in coreboot.
This patch fix the error below:
SANITY CHECK: Unexpected variation in cntfrq. Boot CPU:
0x00000000c65d40, CPU1: 0x00000000000000
BRANCH=none
BUG=none
TEST=boot to kernel on oak board and check secondary cpu's cntfrq.
confirmed cpu1's cntfrq is same as boot cpu's.
Change-Id: I9fbc3c82c2544f0b59ec34b1d631dadf4b9d40eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b47e4e649efc7f79f016522c7d8a240f98225598
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Change-Id: I2d71b0ccfe42e8a30cd1367d10b0f8993431ef8c
Original-Reviewed-on: https://chromium-review.googlesource.com/264914
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9921
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch allows a board without a secdata storage (typically TPM) to pass
the verification stage if recovery path is taken. It's useful for bringup
when the actual board is not ready.
BUG=none
BRANCH=none
TEST=booted the kernel from a usb stick on a cygnus reference board
Change-Id: I5ab97d1198057d102a1708338d71c606fe106c75
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5d45acee31fd5b7bfe7444f12e3622bae49fc329
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/212418
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: Iddd9af19a2b6428704254af0c17b642e7a976fb8
Original-Reviewed-on: https://chromium-review.googlesource.com/265046
Reviewed-on: http://review.coreboot.org/9919
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The code originates from
https://github.com/Broadcom/cygnus-linux/commit/d0752a61273decb16db0fe8d09291f9cc326ed24.
BUG=chrome-os-partner:37439
BRANCH=purin
TEST=booted kernel from a usb stick on the ref board
Change-Id: I51ecf4e1d6890e4286402c26721f4d063ab04711
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fac506e758cb63a947bbdcfbddf9b8edecf7cd2f
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/202386
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: I027affea293af8744c997a2ed3dec741977bd328
Original-Reviewed-on: https://chromium-review.googlesource.com/264560
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9918
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When the PHY is compiled to run in HDR(half data rate),
then either NOBUB or FXDAT must be set to 1 in the DDR
system general configuration register. NOBUB specifies
that reads should be returned to the controller with
no bubbles and this is felt preferable to the fixed
latency option (FXDAT). Both of them inrease read
latency.
BRANCH=none
BUG=chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly and ramstage executed correctly
Change-Id: Iee530ba5bb0acc889fba447dc2ee5cb965ba6926
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7944b4af45d9504098f8b4af44d0f5abafea42c
Original-Change-Id: I9ced76bd670fc4efa7441d57e15f97871b046ae9
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264341
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9917
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The DRAM configuration register, apart from holding the
device density and width also has a rudimentary address
mapping scheme. Currently this is set to the default
Bank/Row/Column. This means that the memory is segmented
into 8 chunks, each with a page detector. If all the
activity is in one section of memory then the other 7
page detectors could be idle.
Changing this to Row/Bank/Column would concatenate the
page detectors meaning that all 8 could be used by a
single initiator. This may not gain anything in a
synthetic bandwidth test but could yield extra performance
in a real world application or benchmark.
BRANCH=none
BUG=chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly; all access to DDR works properly in
Coreboot ramstage, Depthcharge and Linux;
no performance tests were ran so far.
Change-Id: I22d86bf3b679ed63884d7436d9d7bbaf1726f640
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e852ed42afcdc2062a0037144bab723227cb1f1f
Original-Change-Id: If90b0cf5ce86db5e3d6d362873d22d4269e3a49f
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264340
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9916
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add arm64_arch_timer_init function which should be called per CPU for
setting up the cntfrq register of arch timer. During the Linux kernel
bring up time, it will check the cntfrq register per CPU and should be
the same with the boot CPU.
BRANCH=none
BUG=none
TEST=bring up 4 cores in Linux kernel without warning message of cntfrq
register value
Change-Id: I9cb33a54c2c8f9115bbe545a2338ca8e249b8db6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 253cd3c68bb4513ae2033c12c2f070ee391e5a13
Original-Change-Id: I71068dbdd00a719145410ef6ec466f001ae837ad
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264244
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9915
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
secimage is a tool which adds a header and signature to the binary
first loaded by the soc. ARM core frequency is set to 1 Ghz.
BUG=chrome-os-partner:36421
BRANCH=broadcom-firmware
TEST=booted b0 board
Change-Id: Ia08600d45c47ee4f08d253980036916e44b0044a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36284d1b242c26b0b5aac2894f7ed1790da1ef15
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/197155
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: Iaddd24006b368c8f37e075cb51e151e985029f3b
Original-Reviewed-on: https://chromium-review.googlesource.com/264417
Reviewed-on: http://review.coreboot.org/9914
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
BUG=None
TEST=emerge-foster coreboot
Change-Id: I383d2b5f269ed348065a9f270f80514a2ff45742
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fba6973c304e1612a9869c2e78a08650b6e5fe66
Original-Change-Id: I6d5d0098db8dbfb21529bf112a04b97779a0f381
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264027
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9913
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disables 4K regions in the MMU table.
Assumes that the region is already accounted for by the first level page table entry.
BRANCH=storm
BUG=chrome-os-partner:24786
TEST=verified mmu.pagetable.list output for Storm:
_______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________|
C:00000000--00000FFF| | | | | | | | |
C:00001000--000FFFFF| A:00:00001000--000FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:00100000--29FFFFFF| A:00:00100000--29FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:2A000000--2A05FFFF| A:00:2A000000--2A05FFFF| ns| 00| 00001000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:2A060000--2A0FFFFF| A:00:2A060000--2A0FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:2A100000--3FFFFFFF| A:00:2A100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:40000000--59FFFFFF| A:00:40000000--59FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:5A000000--5A1FFFFF| A:00:5A000000--5A1FFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:5A200000--7FFFFFFF| A:00:5A200000--7FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:80000000--FFFFFFFF| | | | | | | | |
Change-Id: Ib603da91966cc4c70ea9d5fee04f1e9890d0bb93
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67db80e6476d8ed35f0a9d1e0d3ca03612b9d9be
Original-Change-Id: I6b149c7edbd975231b783cc53ddb63cf2e94052c
Original-Signed-off-by: Vikas Das <vdas@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/253800
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Commit-Queue: Deepa Dinamani <deepad@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9912
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Upstream coreboot regularly runs Coverity over the code base. Turns out
that's a good idea since it's really easy to screw yourself over with a
missing parenthesis and some unfortunately deceptive line breaking.
This patch fixes a bug in LPDDR3 initialization due to an incorrect
operator precedence assumption ( ?: does not bind stronger than | ). In
effect, instead of setting MR11[1:0] to 0b11 or 0b00 based on ODT, we're
unconditionally setting MR0[1:0] to 0b11. Thankfully, MR0[1:0] seems to
contain read-only bits so this might have not been a problem when ODT is
off (which is currently true for all LPDDR boards).
Also adding a redundant LPDDR_OP() around the 0 to make the intent
clearer and changing 3 and 0 to 0x3 and 0x0 to make it more obvious that
these are bit masks (right?).
BRANCH=veyron
BUG=None
TEST=Running reboot loop on a Minnie, looks good so far...
Change-Id: I06464aaa57e693b1973846a5771162244f7a1c57
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan
Original-Commit-Id: 5bd9eba39fb7b0f940fead963bbc1878b031b2cb
Original-Change-Id: I701ce059472078b5de09a45dd31f54b65a51e641
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/264135
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jinkun Hong <jinkun.hong@rock-chips.com>
Original-Tested-by: Jinkun Hong <jinkun.hong@rock-chips.com>
Reviewed-on: http://review.coreboot.org/9911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
MEC cannot access memmap-range data directly though LPC and instead must
access through its EMI unit.
BUG=chrome-os-partner:38224
TEST=Verify host command functionality on glower.
BRANCH=None
Change-Id: If98d425014a894ddeafad4268f92af5860878522
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58ed3c50ab97ca1e172d5cdc00f4cd8e069e565c
Original-Change-Id: I32b897836d28ef4f3b3aa5f81b9023f2ceb629c8
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263611
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9910
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rather than calling inb + outb directly, access the ports through common
functions. This is in preparation for alternative access modes required
by certain new embedded controllers.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Verify system boots cleanly in normal mode.
BRANCH=None
Change-Id: I98783ff67a37d970019683bb589825bc5d68c033
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 25afa3f95183d8cf2e9a35272c77e92fbc6ee030
Original-Change-Id: Ic9d8f7f5c5d392212e39db28ebceea461d46f796
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263571
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9909
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:35810
BRANCH=purin
TEST=Enable I2C1, reset devboard codec, read a register.
Here is the code that demonstrates how I2C works:
i2c_init(1, 100*KHz);
mdelay(50);
int rc = i2c_writeb(1, 0x18, 1, 0x80); // reset codec
printk(BIOS_INFO, "I2C reset rc=%d\n", rc);
mdelay(50);
uint8_t data = 0;
rc = i2c_readb(1, 0x18, 43, &data);
printk(BIOS_INFO, "I2C read rc=%d data=%x\n", rc, data); // data == 0x80
Change-Id: I0d202f8b0375b5ccd9f71b23fb0cadd5a70ae779
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6bbe9afe3dccd104f39c2c286d3765a28ea20141
Original-Signed-off-by: Anatol Pomazau <anatol@google.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/195706
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Commit-Queue: Anatol Pomazau <anatol@google.com>
Original-Tested-by: Anatol Pomazau <anatol@google.com>
Original-Change-Id: I178acef9de18fa854983294edcd2c05886795e2a
Original-Reviewed-on: https://chromium-review.googlesource.com/263496
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9908
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:35936
BRANCH=broadcom-firmware
TEST=When enable configuration CYGNUS_GPIO_TEST,
print on console:
Start gpio test...
[gpio_crmu] gpio:0 set input
[gpio_crmu] gpio:0 set pullup:0
GPIO get 170=0
gpio request enable pin=64 offset=0x1c
....
GPIO set 69=1
[gpio_asiu] gpio:45 set, value:0
GPIO set 69=0
Gpio test completed...
Additional test:
Measure on GPIO 69 to confirm the voltage
change.
Apply voltage on AON_GPIO0 to check reading.
Change-Id: I634cffccc7f0fa198317a92e3f1670ae6828892e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4784e5d88b9f7acb70bd6f6b12b1096f092f34b8
Original-Signed-off-by: Icarus Chau <ichau@broadcom.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/204537
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: Ia4f833be80d7844c2d014c9ffcf587d385e7766c
Original-Reviewed-on: https://chromium-review.googlesource.com/263495
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9907
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
