summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-28mb/google/brya/var/taeko: add HPS as generic I2C peripheralDan Callaghan
BUG=b:202784200 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Signed-off-by: Dan Callaghan <dcallagh@google.com> Change-Id: I400719d762b001811f809f9549fd030dff9928d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-28drivers/net/r8168.c: Guard against generating power resourceArthur Heymans
Not all platforms need to generate power resources, but the code does not get optimized out at build time because the devicetree gets compiled into a linked list. As this code pulls in some heavy ACPI dependencies that is even implemented with weak empty function it makes sense to optimize out this code using a Kconfig constant. This saves 1.5K in ramstage size on gigabyte/ga-945gcm-s2l. Change-Id: I82289aa7e6e82318417f3b827b86182891dfc2a6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58657 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-28mb/google/guybrush/var/nipperkin: update telemetry settingsKevin Chiu
Currently, the AMD SDLE stardust test fails with incorrect VDD/SOC scale/offset value, it needs to update the two load line slope settings for the telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD scale: 92165 -> 73457 VDD offset: 412 -> 291 SOC scale: 30233 -> 30761 SOC offset: 457 -> 834 BUG=b:200194315 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage pass AMD SDLE/Stardust test Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If53c173000a276a80247ccb08736280a25948939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-28Documentation/releases: Update 4.15 release notesJason Glenesk
Update details for upcoming 4.15 release Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: I4517f7c17ce5788c82a1eafb1589e39b1ce403ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/58422 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27mb/google/guybrush: Move EN_PWR_FP from GPIO_32 to GPIO_3Rob Barnes
EN_PWR_FP is used to enable power to the FPMCU. This frees up GPIO_32 for other uses. This move applies to all board except: * Guybrush * Nipperkin board version 1 Add callbacks for variants to override fpmcu shtudown gpio table and fpmcu disable gpio table. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure fingerprint still works. Change-Id: I4501554da0fab0cb35684735e7d1da6f20e255eb Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Move GSC_SOC_INT_L from GPIO_3 to GPIO_85Karthikeyan Ramasubramanian
GSC_SOC_INT_L gpio is used by Google Security Chip (GSC) to interrupt SoC when the SoC is in S0 state. Hence use GPIO_85 which is in S0 domain and save the GPIO_3 in S5 domain for other use-cases. This move applies to all board except: * Guybrush * Nipperkin board version 1 Update the GPIO configuration, device tree configuration accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure that the SoC <-> TPM communication is working fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I019f10f2f457ab81bcff77ce8ca609b2b40cb2ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/58638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Fix GPIO overrides during verstageKarthikeyan Ramasubramanian
GPIO overrides are defined for verstage. But the overrides are neither enabled nor applied during verstage. Enable the overrides and apply them during verstage. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/stress, warm and cold reboot cycling for 10 iterations each. Ensure that all the PCIe devices are enumerated fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I510313bf860d8d55ec3b04a9cfdfa942373163f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27soc/intel/common/acpi: Correct IPC sub command for reading LPM requirementEthan Tsao
Modify IPC sub command to 2 from 0 for reading LPM requirement from PMC. Reference: https://github.com/otcshare/CCG-ADL-Generic-Full ClientOneSiliconPkg\Include\Register\PmcRegs.h #define V_PMC_PWRM_IPC_SUBCMD_GEN_COMM_READ 2 It is consumed in below. ClientOneSiliconPkg\IpBlock\Pmc\Library\PeiDxeSmmPmcLib\PmcLib.c Change-Id: I58509f14f1e67472adda78e65c3a2e3ee9210765 Signed-off-by: Ethan Tsao <ethan.tsao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/brya/var/gimble: disabled autonomous GPIO power managementMark Hsieh
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:200918380 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I83cc1a5d80bf23d052e83c9791ef866966a3d9b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58626 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27soc/amd/common/block/graphics: add missing GPU PCI IDsFelix Held
Since the iGPU PCI device IDs for AMD Renoir (family 17h, model 60h) and Lucienne (family 17h, model 68h) are already defined in pci_ids.h, also add them to the pci_device_ids list in the common AMD graphics support block. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1c554d21eece182ecea7b09b45b7aa8a733425d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/dedede/var/lantis: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015941 TEST=run part_id_gen to generate SPD id Change-Id: I78ec575d354a5ae7c014a6050364d0a5214e4e92 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-10-27mb/google/dedede/var/driblee: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AB-MGCL 2. H54G46CYRBX267 BUG=b:204023388 BRANCH=firmware-keeby-14119.B TEST=FW_NAME=driblee emerge-keeby coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I1b40e24faf8d85f32839a3d44fd936ca7ee7e09f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/guybrush: Remove WWAN_DISABLE GPIOKarthikeyan Ramasubramanian
In-band controls work to enable/disable the WWAN module. Hence WWAN_DISABLE_GPIO is not critical and can be marked as not connected. BUG=b:188415287 TEST=Build and boot to OS in Guybrush. Ensure that the WWAN module is enumerated on boot and reboot. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7fefba3de9c749971911b21ed4712e950cef5a6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-27mb/google/guybrush: Update SD_AUX_RESET_L signalKarthikeyan Ramasubramanian
On all upcoming variants and board versions of existing variants, SD_AUX_RESET_L signal moves from GPIO_69 to GPIO_5. This means all boards except: * All board versions of Guybrush * Nipperkin Board Version 1. Also in Nipperkin, LCD_PRIVACY_PCH signal moves from GPIO_5 to GPIO_18. Configure the gpios accordingly in baseboard, guybrush and nipperkin variants accordingly. Also update the DXIO port descriptor for SD PCIe engine with the corresponding AUX reset GPIO. BUG=b:202992077 TEST=Build and boot to OS in Guybrush & Nipperkin. Ensure that the SD Controller and SD Card are enumerated fine. Ensure that the enumeration is successful after a suspend/resume cycle. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If28810747e6b4eaae2a693a98e1adc830f80bcf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/brya/var/kano: Disable unused PCIE root port in devicetreeDavid Wu
The baseboard enables PCIe RPs 6, 8 and 9, but kano doesn't use these. Having them enabled will occasionally cause suspend attempts to fail, therefore disable them in the overridetree. BUG=b:203389490 b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie2b82cff6d910c961eeb56704dcbae2bdc2a8c53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush: Reconfigure GPIO_5Karthikeyan Ramasubramanian
On Guybrush, pen is stuffed and GPIO_5 is used to enable Pen power. On Nipperkin board version 1, pen is not stuffed and instead the GPIO is used to control LCD Privacy settings. On upcoming Nipperkin board versions and other variants, GPIO_5 is not used. Configure GPIO_5 accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush. Ensure that the configuration is retained on existing boards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I2aa2f16282b91f157701212ee27ddd2e89918767 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/siemens/chili: Drop redundant Kconfig selectAngel Pons
The `SMBIOS_PROVIDED_BY_MOBO` Kconfig option is already selected through the `SECUNET_DMI` option. So, there's no need to select both of them. Change-Id: I784df87893043a011906af8808aff27d636c7626 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58625 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27src/lib/fmap.c: use le*toh() functions where neededKrystian Hebel
FMAP was developed with assumption about endianness of the target machine. This broke the parsing of the structure on big endian architectures. This patch converts the endianness of the fields where applicable. Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Change-Id: I8784ac29101531db757249496315f43e4008de4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-27Documentation: Remove libretrend from coreboot distributorsPatrick Georgi
As of 2020-07-21 their website says "we'll stop any device produce and won't have a date to return (if we return)." While wishing them best of luck (and welcome them back to the list of distributors), let's take them off the list while they don't ship hardawre. Change-Id: Ia110d0e25bf73c3d7db270b0c2c0e23b99fc36ef Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-27mb/google/dedede/var/drawcia: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204014463 TEST=run part_id_gen to generate SPD id Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I43df98d84c6a274d6f96c8818ce6acff9337d8d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/dedede/var/haboki: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Micron MT53E512M32D1NP-046 WT:B Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015944 TEST=run part_id_gen to generate SPD id Change-Id: Icf2f7352a4bd6a58e3e7abdcaac823b863984732 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia3813306f8c7b69fe5cf0e188c55256b68d329ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/58578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/brya/var/kano: Update the FIVR configurationsDavid Wu
This patch set disables the external voltage rails since kano board doesn't have V1p05 and Vnn bypass rails implemented. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia1f3f4b2ada0154c716aedd521d4151124411ba3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush/var/nipperkin: config eSPI alert as in-bandKevin Chiu
To prevent unexpected alert from eSPI to SOC, configure this alert pin to in-band. BUG=b:199458949,b:203446084 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I18d38fe504bd9f2069b9977d5a35729691f672d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/guybrush/var/nipperkin: Add G2 GTCH7503 HID TS supportKevin Chiu
Follow up the G2 spec: G7500_Datasheet_Ver.1.2 BUG=b:203607764,b:202090378 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage TS is functional Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I98dd3095043ab537d91e81b84944779240b203ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/58564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26intel/adlrvp: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: Ife48aafcec43555175aad44f8b6307beeaea9184 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58592 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26src/cpu: drop CPU_X86_CACHE_HELPER and x86_enable_cache wrapper functionFelix Held
Selecting CPU_X86_CACHE_HELPER only added the x86_enable_cache wrapper function around enable_cache which additionally wrote a POST code to port 0x80 and printed a message to the console. This function was only called during multi-processor initialization in ramstage via the init function pointer in the CPU's device operations struct and was run on all cores, so the message on the console was printed once per CPU core. This patch replaces all x86_enable_cache calls by calls to enable_cache and removes the wrapper function and the Kconfig symbol CPU_X86_CACHE_HELPER which was used to only add this when the corresponding CPUs used the x86_enable_cache wrapper function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I5866b6bf014821ff9e3a48052a5eaf69319b003a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58579 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26cpu/x86/Kconfig.debug_cpu: drop HAVE_DISPLAY_MTRRS optionFelix Held
Since all x86 CPUs in tree have MTRR support, there is no need to guard the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs have a display_mtrrs call at least somewhere in their code, so selecting the DISPLAY_MTRRS option will always have an effect. All SoCs that don't select RESET_VECTOR_IN_RAM have the postcar stage where it gets called. The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver which contains plenty of display_mtrrs calls. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: drop CPU_X86_LAPIC Kconfig optionFelix Held
All x86 CPUs in the coreboot tree have a local APIC, so the corresponding code can be unconditionally included in the build. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc354fb386977b0fca4caa72c03aa77a20bc348e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/intel/quark/Kconfig: don't unselect CPU_X86_LAPICFelix Held
The Intel Quark SoC does have a LAPIC on its x86 CPU core, so we should select CPU_X86_LAPIC. This will additionally include the Makefile from cpu/x86/lapic. Since none of AP_IN_SIPI_WAIT, LEGACY_SMP_INIT and UDELAY_LAPIC gets selected, only the boot_cpu.c and lapic.c targets will be added to the build. Since SMP isn't set, adding the boot_cpu.c target won't change the resulting binary of a timeless build, since the only function inside will be removed by the compiler's pre-processor in the !SMP case. So the only thing that will change the resulting binary is the addition of the lapic.c target. From this target only the function cpu_get_lapic_addr will be used which overrides the weak implementation in acpi/acpi.c. The call in arch/x86/mpspec.c can be ignored, since GENERATE_MP_TABLE isn't selected. So this change will result in the LAPIC address in the MADT being changed from 0 to to LAPIC_DEFAULT_BASE. Since the documentation of the Quark SoC mentions that it has a LAPIC on its one x86 core, this should work. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f163bd608f0548abb0e8de90843d2a796b8ef6c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-26mb/google/dedede/var/blipper: Add fw_config probe for multi audio codecYongkun Yu
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS" BUG=b:197694580 BRANCH=dedede TEST=ALC5682I-VD or VS audio codec can work normally Signed-off-by: Yongkun Yu <yuyongkun@huaqin.corp-partner.google.com> Change-Id: I422f206b8f1f3705a65808041f1a1544c461b431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26include/device/pci_ids: move AMD device IDs below AMD vendor IDFelix Held
Half of the AMD PCI device ID definitions were below the ATI vendor ID, so move those below the AMD PCI vendor ID definition. The entries are kept in the order they were before and added before the existing AMD device ID definitions below the AMD vendor ID definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I34ffdc49884737541b8653bebf023a68050375d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26include/device/pci_ids: fix typo in PCI_DEVICE_ID_AMD_FE_GATE_700DFelix Held
The definitions isn't used in either spelling. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id6faea2b9c89f0bd3c164a6dc76fac5ea712d313 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-26soc/intel/alderlake: set lock offset for gpio pad communitiesNick Vaccaro
Initialize the pad_cfg_lock_offset field for the various gpio pad_community structures in the adl_communities. BUG=b:201430600 TEST='emerge-brya coreboot' and verify it compiles successfully. Change-Id: I2cd3e43a84b0140bb2aeae5de1e299db714d419b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26soc/intel: Update api name for getting spi destination idWonkyu Kim
Update api name and comments to be more generic as spi destination id is not DMI specific. Update api name as soc_get_spi_psf_destination_id and comments. And move PSF definition from pcr_ids.h as it's not pcr id. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie338d05649d23bddae5355dc6ce8440dfb183073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2021-10-26soc/example/min86/Kconfig: don't unselect CPU_X86_LAPICFelix Held
Since all multi-core x86 CPUs need to have LAPICs, this option should be selected for soc/example/min86. TEST=The example/min86 mainboard still builds. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5aa6e850f0b4dca27309385ba889b04335fe4f0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/intel/socket_LGA775: Drop commented-out entriesFelix Held
The code for these CPU models isn't present in coreboot. These lines have been commented-out since they where added, so drop them. Change-Id: I8fc53fea4225217bc5bb70d839c280ebb64fd3a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/intel/*/Kconfig: move selection of CPU_X86_CACHE_HELPERFelix Held
Move the selection of CPU_X86_CACHE_HELPER to the Kconfig file of the CPU models which call the x86_enable_cache function that gets added to the build by selecting this option. Change-Id: Ie75682f5d20a79fc2f3aab9b8a2c3ccf79d1ad5c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26Documentation/releases/4.15: Add note about libpayload improvementsJakub Czapiga
Change-Id: I3043e70523db1b7f1df90789a69eadd155848bb0 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-10-26mb/prodrive/hermes: Remove overridetreeAngel Pons
There's no need to have an overridetree with a single board variant. TEST=Compare static.c and observe only device order has changed. Change-Id: I2097e247c27d5d0c5479cb533b477cd490a4c827 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26mb/prodrive/hermes: Reorganize per-port PCIe settingsAngel Pons
Move per-port PCIe settings inside the corresponding PCIe root port device. Also, remove several unnecessary and/or redundant comments. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I3f64d56b3b2c592194b18ae7b7c63ef41a1e060f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26cpu/x86: Introduce `CPU_X86_CACHE_HELPER`Felix Held
There's no need for relative paths with Kconfig options. Change-Id: Ib9b9b29a158c34a30480aaabf6d0b23819d28427 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/amd,intel/*/Makefile: don't add cpu/x86/cacheFelix Held
Some CPUs don't use the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ia44c7b150cd12d76e463903966f67d86750cbdd9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/*/Makefile: don't add cpu/x86/cacheFelix Held
No SoC uses the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I7c5039e1341fd4089078ad7ffb2fe6584a94045c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/intel/common: Add HECI Reset flow in the CSE driverSridhar Siricilla
This change is required as part of HECI Interface initialization in order to put the host and CSE into a known good state for communication. Please refer ME BIOS specification for more details. The change adds HECI interface reset flow in the CSE driver. It enables coreboot to send HECI commands before DRAM Init. BUG=b:175516533 TEST=Run 50 cold reset cycles on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie078beaa33c6a35ae8f5f460d4354766aa710fba Reviewed-on: https://review.coreboot.org/c/coreboot/+/55363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26soc/intel/adl: Skip sending MBP HOB to save boot timeMAULIK V VAGHELA
MBP Hob is being generated by FSP after getting data from ME. coreboot does not consume this HOB and FSP provides an option for bootloader to skip generation of MBP HOB. This will help in saving ~14 ms of boot time. Here is the data from Brya P1 Board: Before: 955 returning from FspSiliconInit 879,432 (99,156) After: 955 returning from FspSiliconInit 1,177,513 (84,506) BUG=b:188577893 BRANCH=None TEST=No functional impact on Brya system and boot time is reduced with this patch. Change-Id: Ibb64e4d0f4ae7212defb6704b05a78e754f75cd7 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58289 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-25mb/google/guybrush/var/nipperkin: override dxio to turn off WLAN ASPM L1.2/L1.2Kevin Chiu
turn off WLAN ASPM L1.1/L1.2 as a short-term w/a for WLAN AP probe failure. BUG=b:198258604 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage AP is able to be probed by wlan module Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ic7be523626b0ff6e4b1c66ba6af13b15061ef4cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25sc7280: Add AOP FW download supportRavi Kumar Bokka
AOP firmware support from sc7280. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ib7027cdf78a9cdcccc8cfff7eef3cc540fb4093e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/qualcomm: Commonize AOP firmware supportRavi Kumar Bokka
Move AOP firmware support from qualcomm/sc7180 into qualcomm/common BUG=b:182963902 TEST=Validated on qualcomm sc7180 development board Change-Id: I90b0f48e15df390970e027bff2065b7a89b14cec Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/qualcomm/sc7280: define the aop symbolsRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I62044f6fcb301c0ca35c42598f998913f9b94b95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/amd/common/block/lpc/Makefile: simplify handling spi_dma.cFelix Held
Use the verstage_x86 class for the spi_dma.c target instead of using the verstage class and guarding it with !VBOOT_STARTS_BEFORE_BOOTBLOCK. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b8cafd1ef17df8c485f6594bc0928cea88e436b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25cpu,soc/amd/*/Makefile: don't add cpu/x86/pae a second timeFelix Held
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is no need to include it in the Makefile of a CPU or SoC, so remove it from those Makefiles. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-25soc/intel/common: Skip CSE post hook when CSE is disabledSubrata Banik
This patch fixes regression introduced by commit bee4bb5f0 (soc/intel/common/cse: Late sending EOP msg if !HECI_DISABLE_USING_SMM) FAFT test case fail when doing `firmware_DevMode` test. If CSE is already hidden then accessing CSE registers would be wrong and will receive junk, hence, return as CSE is already disabled. BUG=b:203061531 TEST=Brya system can boot to OS with recovery mode. Change-Id: I2046eb19716c397a066c2c41e1b027a256bd6cf9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-25drivers/pc80/tpm: Use '%u' as printf formatter for unsigned variablesWerner Zeh
Use %u instead of %d for printing unsigned variables. Change-Id: I0f4bf7b80dfbde0802af8ad96fd553cb75d60e6e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25drivers/pc80/tpm: Use stopwatch for timeout-loopsWerner Zeh
There are manual timeout-loops which use a fixed value and udelay(). In all cases there is a debug printk() inside this loop which, when enabled, takes way longer than the counted microsecond delay. This leads to the result that e.g. a 1 second delay takes nearly an eternity if the debug messages are enabled due to the longer function execution time. This patch uses the stopwatch scheme for the timeout-loops which still makes sure that the timeout period is maintained while it takes longer function calls like printk() into account. In order to keep the minimum delay between two register accesses on the TPM keep the udelay(1)-call. TEST=Enable TPM debug messages on a board where the TPM hits a timeout by failure and make sure that the debug messages occur in the log just in the timeout period. It still works as expected if the debug messages are disabled. Change-Id: I8fd261c9d60a9a60509c847dbc4983bc05f41d48 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25mb/google/brya/variants/gimble: Enable Bluetooth offload supportMac Chiang
Enable CnviBtAudioOffload UPD BUG=b:199180746 TEST=emerge-byra coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: Ic507b1d0f7c2f38de8d24247cd677b897a7463f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-25elogtool: add pytest for elogtoolRicardo Quesada
This CL adds a python test for elogtool. It tests the basic functionality of elogtool: list, clear and add. A future CL will include more complex tests. BUG=b:172210863 TEST=pytest elogtool_test.py Change-Id: If1241ad070d1c690c84f5ca61c0487ba27c2a287 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-10-24util/inteltool: Add PCH IDs for 200 series chipsetsTimofey Komarov
Signed-off-by: Timofey Komarov <happycorsair@yandex.ru> Change-Id: Iadad5e79aef9da3fac627adc135525a5001a72b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-23arch/x86: fix a wrong variable in ioapic_set_max_vectors()Iru Cai
The commit 04a40379b has a wrongly written variable, which sets an IOAPIC register to a wrong value and makes the Linux kernel unable to boot. Tested on HP EliteBook 2760p, the kernel boots after this patch. Change-Id: Ifda7bb61a431dbf9c2df2f738aa806dd6d8097b8 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-22soc/amd/cezanne,picasso/chipset.cb: drop LAPIC deviceFelix Held
After adding code to handle the case of missing the link/bus on the CPU cluster device in mp_cpu_bus_init, there's no need to have the LAPIC device in the devicetree any more. TEST=Mandolin still boots successfully. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icfc4fb61b373129f3bf4f4de09c38076a8f66733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/denverton_ns: use mp_cpu_bus_initFelix Held
After adding the functionality to add a bus/link on the CPU cluster device in mp_cpu_bus_init if it is missing due to no LAPIC device being present in the devicetree below the CPU cluster device, we can use mp_cpu_bus_init as init function in cpu_bus_ops and implement mp_init_cpus. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I76aebeca1b3227cfd310b6c45f506c042b35ae04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22include/device: ensure valid link/bus is passed to mp_cpu_bus_initFelix Held
When a chipset or mainboard devicetree doesn't have any LAPIC devices in its CPU cluster, not only the LAPIC device, but also the link/bus between the CPU cluster device and the LAPIC devices will be missing and the CPU cluster's dev->link_list will be NULL. This patch handles this case in the common code like commit 3c0ecd57c174b7391c66d22406effe18ce570cac (soc/intel/common/cpu: Handle non-zero BSP APIC ID in init_cpus) and commit ba936ce5db819d5ecb34e83a998b2390ecbdc4b9 (soc/intel/denverton_ns: Ensure CPU device has a valid link) already did in the common Intel SoC and the Denverton code. With this change all CPUs and SoC that use the common mp_cpu_bus_init as init function in the CPU cluster's device operations struct won't require having at least one LAPIC device in the chipset or mainboard device tree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0d85de5cafb6390b8fbd512186899d6a815e972 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/elkhartlake: Add PSE PCI devices into header fileLean Sheng Tan
Since PSE devices could be initialized as either host owned (PCI devices) or PSE owned (will be hidden from coreboot and only visible to PSE interface), add all PSE devices in PCI list header file for future usage. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iaa40cdcb021d05e50504dd85f94e9c021e284d00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58466 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-22AGESA binaryPI: Use common acpi_fill_madt()Kyösti Mälkki
Change-Id: I01ee0ba99eca6ad4c01848ab133166f8c922684d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22mb/emulation/qemu-i440fx: Select IOAPICKyösti Mälkki
For SMP operation IOAPIC needs to be configured. For a build with MAX_CPUS=1 emulation might still decode the IOAPIC MMIO window, it does not really matter to have it always reserved. Change-Id: Ia340fc418cd9ceda56a2a10972e130d9f289c589 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-22sb,soc/intel: Replace set_ioapic_id() with setup_ioapic()Kyösti Mälkki
This adds delivery of PIC/i8259 interrupts via ExtNMI on the affected platfoms. Change-Id: If99e321fd9b153101d71e1b995b43dba48d8763f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22sb,soc/intel: Set IOAPIC max entries before APIC IDKyösti Mälkki
This allows to replace set_ioapic_id() call with setup_ioapic() that also clears redirection table entries. Change-Id: I854f19c997a96bcdccb11a0906431e3291788cb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-22arch/x86/ioapic: Allow IOAPIC with only one vectorKyösti Mälkki
Remove the test for count=0 that leaked from drivers/generic/ioapic implementation. See commit ea2fb8d80 and commit 8cc25d229. Change-Id: I26944b930851fbea160c844ea46e2faa61c9af8e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-22sb,soc/intel: Set IOAPIC redirection entry countKyösti Mälkki
The number of redirection table entries (aka interrupt vectors) inside an I/O APIC may depend of the SKU, with the related register being of type read/write-once. Provide support utilities to either lock or set this registers value. Change-Id: I8da869ba390dd821b43032e4ccbc9291c39e6bab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-22soc/intel/braswell: use mp_cpu_bus_initFelix Held
Implement mp_init_cpus and use mp_cpu_bus_init as init function in cpu_bus_ops. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2adcb1e1d79ced804925c81095cc5c0c2e6f9948 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/baytrail: use mp_cpu_bus_initFelix Held
Implement mp_init_cpus and use mp_cpu_bus_init as init function in cpu_bus_ops. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I057ae8d95bdc510e9e7afb144b692531107fa45d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: use cb_err as status return type in remaining functionsFelix Held
Using cb_err as return type of mp_run_on_aps, mp_run_on_all_aps, mp_run_on_all_cpus and mp_park_aps clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of all 4 functions listed above against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b3f03415a041d3ec9cd0e102980e53868b004b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21soc/amd/common/block/cpu/smm/finalize: simplify finalize_coresFelix Held
The local variable int r isn't needed, so remove it. This is a preparation to change the return type of mp_run_on_all_cpus from int to enum cb_err which will be done in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie4c454cbfcc581be41ea3463ea6f852a72886128 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21soc/intel/skylake/cpu: rework failure handling in post_mp_initFelix Held
Use a boolean type to store the information if any mp_run_on_all_cpus call failed. This is a preparation to change the return type of mp_run_on_all_cpus from int to enum cb_err which will be done in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic04ad3e4a781a00ee6edcd7dbd24bc7601be1384 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21include/memory_info.h: Increase DIMM_INFO_TOTAL number from 8 to 16Tim Chu
Increase the number of total dimm to 16 to support system with more than 8 dimms. Also, remove unneeded comment. TESTED=On S9S, dmidecode -t 17 shows expected results. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Iead53e96f37c55ba1b7a13fb62db1a1c10fa2e1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58440 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-21arch/x86/smbios: Add support for wake-up type in smbios type 1Tim Chu
Add system wake-up type in smbios type 1 - system information. TESTED=On S9S, can override original value and show expected result using "dmidecode -t 1". Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: If79ba65426f1f18ebb55a0f3ef022bee83c1a93b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-10-21mb/google/brya/var/kano: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:202913826 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ibf8ff0e48c4bab435d082dee27bcd53bc85b088d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: CT Lin <ctlin0@nuvoton.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/brya/var/brask: Correct SSD power sequenceDavid Wu
M.2 spec describes PERST# should be sequenced after power enable. BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia7e5c7b1a2194d53d98865d33cf1bc6111572876 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21mb/google/guybrush/var/nipperkin: Enable GPP2 for NVMe bridge eMMC storageKevin Chiu
BUG=b:195269555 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage eMMC sku is bootable Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If9e0fdc1667cbaac05fdf4c6689d47a561016c9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-21acpigen,soc/amd,cpu/intel: rework static DWORD for CPPC tableMichael Niewöhner
Some elements in the ACPI CPPC table allow static DWORDs. Instead of using a fake register resource, use a tagged union with the two types "register" and "DWORD" and respective macros for CPPC table entries. Test: dumped SSDT before and after do not differ. Change-Id: Ib853261b5c0ea87ae2424fed188f2d1872be9a06 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-21mb/google/guybrush/var/nipperkin: Override GPIO configurationKarthikeyan Ramasubramanian
SOC_PEN_DETECT_ODL, SOC_SAR_INT_L and WWAN_AUX_RESET_L are not connected in nipperkin. Override those GPIO configurations. BUG=None TEST=Build and boot to OS in Nipperkin. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7e497f83593472ecf4927e5379e1dd7786e77e62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2021-10-21mb/google/guybrush: Add PCIe Reset GPIO18 to PCIE WWAN DXIO DescriptorKarthikeyan Ramasubramanian
WWAN_AUX_RST_L is asserted during S0i3 entry. But it needs to be de-asserted before PCIe link training during S0i3 resume. Otherwise the concerned gpp_bridge_2 PCIe device is not enumerated on Soi3 resume. This change feeds in the WWAN_AUX_RST_L GPIO in the DXIO descriptor so that SMU de-asserts this reset on S0i3 resume. BUG=b:199780346 TEST=Build and boot to OS in Guybrush. Perform suspend/resume cycles for 500 iterations. Ensure that the PCIe devices enumerate fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I588c490bf3f8a7beffefc3bfd8ca5167fcbcb9a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-21mb/google/guybrush: Make DXIO Port Descriptor configurableKarthikeyan Ramasubramanian
Instead of a const port descriptor, make it configurable. This will help to avoid adding duplicate tables for every minor configuration updates. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/resume, warm and cold reboot cycles for 10 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If616a08ba54fddab25e5d0d860327255dfd43cbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/58378 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-21cpu/x86/mp_init: use cb_err as run_ap_work return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. To not change the return types of mp_run_on_aps which is exposed outside of this compilation unit to keep the scope of this patch limited, the return value of run_ap_work gets translated to the int values in mp_run_on_aps. This could also be done by a cast of the run_ap_work return value to int, but an explicit translation of the return values should be clearer about what it does there. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id346c8edf06229a929b4783498d8c6774f54a8b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init & bsp_do_flight_plan return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. To not change the return types of mp_init_with_smm which is exposed outside of this compilation unit to keep the scope of this patch limited, the return value of mp_init gets translated to the int values in mp_init_with_smm. This could also be done by a cast of the mp_init return value to int, but an explicit translation of the return values should be clearer about what it does there. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4129c1db06a877c47cca87782af965b62dcbbdc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as wait_for_aps return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Also restructure the implementation of wait_for_aps to not need a local timeout variable. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I86b8c8b0849ae130c78125b83d159147ce11914c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as apic_wait_timeout return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Also restructure the implementation of apic_wait_timeout to not need a local timeout variable. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2fe32c761492d252b154d2f50f2a330cf4f412d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as install_permanent_handler return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifb64b5908b938bb162153433e5f744ab0b95c525 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as install_relocation_handler return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95f36ba628c7f3ce960a8f3bda730d1c720253cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86: Remove cpu parameter to ap_initRaul E Rangel
We now pre-populate cpu_info before jumping to the C handler. We no longer need this parameter. I moved the stack alignment closer to the actual invocation of the C handler so it's easier to reason about. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS and verify all CPUs still function Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8997683b6613b7031784cabf7039a400f0efdea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86: Require CPU_INFO_V2 when selecting PARALLEL_MPRaul E Rangel
This will reduce the number of AP init paths we need to support. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS and see all CPUs initialized correctly Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I05beb591bd7b3a26b6c51c10d4ffd6f8621c12eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21arch/x86,cpu/x86: Fix 64-bit CPU_INFO_V2 build errorsRaul E Rangel
There are two possible code sections where the cpu_info macros can be included: .code32 and .code64 Doing a `push %eax` while in a .code64 section will result in a compiler error. This macro manually pushes the 32-bit register onto the stack so we can share the code between 32 and 64 bit builds. We also can't implicitly dereference per_cpu_segment_selector because it's a 32-bit address. Trying to do this results in the following: E: Invalid reloc type: 11 E: Illegal use of 32bit sign extended addressing at offset 0x1b2 If we load the address first, then dereference it, we can work around the limitation. With these fixes, 64-bit builds can now use CPU_INFO_V2. BUG=b:179699789 TEST=Boot qemu 64 bit build with CPU_INFO_V2 and 4 CPUs. See AP init work as expected. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4e72a808c9583bb2d0f697cbbd9cb9c0aa0ea2dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21mb/google/brya/var/kano: Enable BT offload supportDavid Wu
Enable the CnviBtAudioOffload UPD and program the corresponding BT VPGIOs. BUG=b:202913826 TEST=emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Id81cba82742f552c098ec3719a0b453b752dc5c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21util/release/build-release: Create cross-toolchain version fileFelix Singer
Add cross-toolchain version file to the release tarball, which can be used for pre-setting the variables used in buildgcc. Change-Id: Iad1e0adaa95b71f161caf978276bfb0a63eac8f4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-21util/crossgcc/buildgcc: Use pre-set CROSSGCC_VERSION if possibleFelix Singer
For reproducibility, a version string is appended to the version of the tools used in the cross-toolchain. Currently, git is used to determine that version string at runtime of this script. There are cases, where it's not possible to determine that version string, e.g. when a release tarball is used, and if so, the version string is just `v_`. Thus, allow pre-setting the variable `CROSSGCC_VERSION`. Change-Id: I888ccd877c93436b5e033528c43bd8667b8d2f10 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 19:37:34 +0000