summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-14AMD cimx/sb800: Disable unused GPP portsKyösti Mälkki
If devicetree.cb has GPP port off, really disable it before even trying to do link training. Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8385 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configurationKyösti Mälkki
A set of pins can be configured for GPIO or (parallel) PCI bridge use. When requested configuration is 0:14.4 enabled, register programming must be done before attempting to enumerate devices behind the bridge. When requested configuration is 0:14.4 disabled, we must not even temporarily enable pins for PCI use to avoid spurious GPIO state changes. As our PCI subsystem currently does not configure visible PCI bridges that are marked disabled, we cannot mark 0:14.4 disabled just yet but need to handle pcengines/apu1 as a special case. Drop related dead code. Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Fix console outputKyösti Mälkki
These sb800_enable() messages without newline mess up the log. Change-Id: I1689b68702e08e2a287083835f310f52f495c451 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8384 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AGESA fam15tn fam15rl fam16kb: Drop HT3_SUPPORTKyösti Mälkki
Kconfig variable is not implemented. Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8345 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14AGESA fam10 fam12 fam15: Always have HT3_SUPPORTKyösti Mälkki
Keep the slower HyperTransport configuration for a possible reference in fam15 boards. Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8344 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14arch/x86/boot/tables.c: Remove unused variable assignment to `rom_table_end`Paul Menzel
Change-Id: I098d1238cda16060c3566f242443007cdaf9bd82 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5106 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14drivers/xpowers/axp209: Print a message when probing failsAlexandru Gagniuc
Probing is done by reading the ID register and comparing it to a known value. When there is a mismatch, print an error. Change-Id: I36fb1fe9b56e97660556dcb27be25bfe5129ad73 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8433 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-14superio/fintek/f81216h: Add the correct unlock key valuesDave Frodin
The actual key values were not added in commit 17ace8255. TEST: amd/lamar shows the correct result. Change-Id: I8f20e3d0ce83dd87b6c233ee98c3e77a6b7c1b03 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8375 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: Marc Jones <marc.jones@se-eng.com>
2015-02-14arm64: Cleanup arch io header filesFurquan Shaikh
BUG=None BRANCH=None TEST=Compiles successfully for rush Original-Change-Id: Ic8f5d91f6635ef12845ab049a20df5a6e33bbf55 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/203142 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit ecf7822812d8745af74eaf135b7b806c23ef51a2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I79abbded94376ba90a8c729aaf856ce303509e48 Reviewed-on: http://review.coreboot.org/8410 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: Marc Jones <marc.jones@se-eng.com>
2015-02-14southbridge/amd/pi: Combine and correct the IRQ text stringsDave Frodin
This combines the Avalon and Bolton tables of text descriptions of the IRQ assignments. It also corrects the text string for the SD controller on Bolton. Test: This was verified on amd/lamar. Change-Id: Ibc74641eb4e1f7581f26d260ba3d33201bcbf5e7 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8374 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-13tegra132: Fix build for verstageMarc Jones
Verstage isn't included yet, but we need to have the Kconfig option for toolchain.inc to pass. Change-Id: I7fae73cd3b77fd347398221489caf745274701eb Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/8409 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-13documentation: begin documenting our use of git submodulesPatrick Georgi
git submodules have some surprising behaviour, and we make full use of it. Start building a canonical resource for that so developers can spend their time on better things than on fighting git. Change-Id: I5aa721e9b0acb2912a057858fd23a1d59d845ed1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/8371 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-13northbridge/amd/amdfam10: Move K10 specific menu to proper Kconfig fileTimothy Pearson
Change-Id: Ib83ec5c397fdef5aa9e3376f1c0072cfa2f74fa6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8425 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-13fsp_baytrail: Add macros to define 20K pull-up and downWerner Zeh
Add two macros to gpio.h which allow to setup 20K pull-up or pull-down resistor for a given GPIO. Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8402 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-13Fix source code permissionsStefan Reinauer
Two source files were accidently marked executable. Switch them back to mode 644 (rw-r---r--) Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9 Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8426 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-12Use ALIGN_UP instead of manual alignmentPatrick Georgi
BUG=none BRANCH=none TEST=none Change-Id: I56f357db6d37120772a03a1f7f84ce2a5b5620e9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://chromium-review.googlesource.com/241855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Patrick Georgi <pgeorgi@chromium.org> Commit-Queue: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/8396 Tested-by: build bot (Jenkins)
2015-02-12lint: exclude *.hex files from whitespace checkingWerner Zeh
If one needs raw binary files, .bin extension cannot be used due to settings in .gitignore. This patch allows to use .hex files. To avoid lint checks on these files, exclude the .hex extension from the test. Change-Id: I4b503229d63694c48cce12ca8cd33ea58172af01 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8403 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-12lint: exclude nvidia submodule from file listPatrick Georgi
From git's point of view submodules are a weird third thing between file and directory. Avoid trying to apply file handling on a directory. Change-Id: Ibbc9c28e1657d96413c5fb08705d30e25171254d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/8372 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-12drivers/xgi: Fix user-visible typo in printkTimothy Pearson
Change-Id: I1e4c5c807d4a78844a40083178b6f96ffeb3659e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-12payloads/seabios: Enable SeaVGABIOS option if native text init supportedTimothy Pearson
SeaVGABIOS supports both the coreboot linear framebuffer and native EGA text mode. To use SeaBIOS interactively on standard VGA hardware a VBIOS is needed; SeaVGABIOS is one such option. TEST: Booted KFSN4-DRE with XGI Volari Z9s and SeaVGABIOS. Was able to interact with SeaBIOS and comboot menu, then booted Linux successfully. VGA display was continuously usable from power on to Linux login. Change-Id: Id4bd4cb5cece9114457633832c5f0e5280c02b47 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8368 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-12AMD K8 boards’ `romstage.c`: Spell sync*hr*onize correctlyPaul Menzel
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5101 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11cpu/amd/model_10xxx: add Propus (00100F52h BL-C2) equivalent idNicolas Reinecke
Change-Id: I32eccfb4eae176e0155c53efaf463258653eefc2 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8355 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11amd/amdfam10: Fix incorrect core count identificationTimothy Pearson
The core count identification code in the PowerNow! _PSS ACPI object generation code was incorrectly copied from the model_fxx code. This code has been rewritten to properly return the number of cores installed in the system. Change-Id: I19567486f2de9dc2c43970addf4d91fa3d233a99 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8421 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11asus/m4a785/Kconfig: Add vgabios PCI idNicolas Reinecke
The PCI id defaults to 1106,3230 -> via chrome 9 ... Tested on the board. Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11cpu/amd/model_10xxx: update microcodeNicolas Reinecke
microcode updates are extracted from: www.amd64.org/microcode.html Mircocode versions of 1020h and 1022h are more recent in coreboot than inside the AMD archive. Change-Id: I9f52accc1ebc7057890a769a059048e9982109d2 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8354 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11Add Linux kernel's checkpatch.pl scriptStefan Reinauer
Carefully staging to enable checkpatch for coreboot contributions. The biggest offender of the rules enforced by checkpatch I have found so far is ... Oh, you guessed it? It's checkpatch itself. Change-Id: Iaacbcd52c3bc22b083a24127a3ea17a7cc706245 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8417 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-11mainboards/asus/kfsn4-dre: Run BSP FIDVID before AP FIDVIDTimothy Pearson
This resolves an issue on Shanghai dual CPU configurations where the APs on node 0 would not start. Single CPU configurations are unaffected by this issue. TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified proper BSP/AP start and microcode patch levels. Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8397 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11cpu/intel: >= nehalem: add comments to msr finalize'sAlexander Couzens
Improve documentation of lock down MSRs in finalize(). Most of these aren't documented in public MSRs. Change-Id: I4fc47bb9b71bdd7907aae65fc18b419a17ae8547 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8294 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-02-11utils/msrtool: add westmere cpuids to nehalemAlexander Couzens
Westmere's are nehalem's in 32nm Change-Id: I529194d50dbe3f585faee14961542433ea96ab75 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8293 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-02-11ectool: remove extra printf("Not dumping EC IDX RAM.")Alexander Couzens
It doesn't provide any useful information. Change-Id: I13e68d443bbcadea45b8fbcc262ceb9deb3e2e61 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8380 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-02-11ectool: add write supportAlexander Couzens
Use `ectool -w <addr> -z <data>` to write into ec ram Change-Id: Id4aca045f6b7c2343be96ea474ee74033897b8b7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8323 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-02-10PCI subsystem: Remove AGP bridge typeKyösti Mälkki
There is no auto-detection for AGP type and we have no hardware that selects this. Furthermore, we treat AGP bridges just like PCI bridges, there is no optimisation for higher bandwidth. Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8367 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-10Baytrail_fsp: Make ME path configurable in menuconfigWerner Zeh
By adding a description to ME_PATH it becomes visible and editable in menuconfig. Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8398 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-10lenovo/x200: Increase default CBFS_SIZE to 2 MiBMichał Masłowski
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB flash variants. Let's allow using the whole region instead of the gm45 default of 1 MiB. Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/8392 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-10amd/amdfam10: Fix invalid transition latency in PowerNow! _PSS objectsTimothy Pearson
Fix a mistake that led to an invalid 0ms latency in the automatically generated PowerNow! ACPI _PSS objects. TEST: Booted FreeBSD and Linux and verified correct latency values. Found-by: Coverity Scan Change-Id: I03cecab694708136dc555ca2af7ee9a0bf9be5af Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8376 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-09fsp_baytrail: Get FSP reserved memory from the FSP HOB listMartin Roth
Because the pointer to the FSP HOB list is now being saved, we can use that to find the top of usable memory. This eliminates the need to hardcode the size of the FSP reserved memory area. Tested on minnowboard max for baytrail. The HOB structure used does not seem to be present for the rangeley or ivybridge/pantherpoint FSPs. At the very least, the GUID is not documented in the integration guides. Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8308 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-09Get rid of .car.global_data warnings for GCC buildMartin Roth
The "used" attribute was added in commit 27cf2472 which caused these warnings to start appearing when using the standard coreboot GCC toolchain: {standard input}: Assembler messages: {standard input}:96: Warning: ignoring changed section type for .car.global_data {standard input}:96: Warning: ignoring changed section attributes for .car.global_data The # at the end of the section name causes the assembler to ignore everything following the name. I verified that the resulting binaries are the same with and without the #. Change-Id: Iaac8042533842ed887f33895f083b613a18f496a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8301 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-09Intel FSP platforms: Fix timestampsKyösti Mälkki
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR. Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8024 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-08lenovo/t430s: Add new port.Nicolas Reinecke
The port is based on the x230 / t530. Tested - is in active use. Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8359 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06drivers/pc80/mc146818rtc: Reduce superfluous preprocessor useAlexandru Gagniuc
cmos_init() had layers of preprocessor directives, which resulted in a complete mess. Refactor it to make use of the IS_ENABLED() macro. This improves readability significantly. One of the changes is to remove in inline stub declaration of (get|set)_option. Although that provided the ability for the compiler to optimize out code when USE_OPTION_TABLE is not selected, there is no evidence that such savings are measureable. Change-Id: I07f00084d809adbb55031b2079f71136ade3028e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8306 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-06include/types.h: Provide BIT() macroAlexandru Gagniuc
This macro is controversial for arches where the bits are numbered MSb first, though we don't support such an arch. We've seen this macro creep into our tree in different places, so provide it in one place. Change-Id: I86cd8a16420f34ef31b615aec4e0f7bd3191ca35 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8280 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-02-06mainboards/asus/kfsn4-dre: Indicate native text mode init supportTimothy Pearson
Change-Id: Ib00ecdcad17fa5c0300d22378837e36d0918f9db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8369 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06drivers/xgi: Fix legacy VGA text mode initializationTimothy Pearson
TEST: Booted KFSN4-DRE with on-board XGI Volari Z9s Initial text from coreboot appeared, and the Linux console was displayed immediately at the start of kernel initialization. After boot was complete the text mode console continued to behave normally. SeaBIOS does not currently make use of the legacy VGA text-mode display. Change-Id: I2177a1d00e6f07db661dd99fe0184e2c228404d1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8360 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06intel/fsp_rangeley: Indent '#define' consistentlyYork Yang
The indentations of #define are not consistent in chip.h. Update to make all #define indentations being aligned and put them after the variable declaration. Change-Id: I37550acac18bac3efddb580ef6b956be0e2b357a Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/8333 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2015-02-06FSP & CBMEM: Fix broken cbmem CAR transition.Martin Roth
1) Save the pointer to the FSP HOB list to low memory at address 0x614. This is the same location as CBMEM_RESUME_BACKUP - the two aren't used in the same platform, so overlapping should be OK. I didn't see any documentation that actually said that this location was free to use, and didn't need to be restored after use in S3 resume, but it looks like the DOS boot vector gets loaded juat above this location, so it SHOULD be ok. The alternative is to copy the memory out and store it in cbmem until we're ready to restore it. 2) When a request for the pointer to a CAR variable comes in, pass back the location inside the FSP hob structure. 3) Skip the memcopy of the CAR Data. The CAR variables do not get transitioned back into cbmem, but used out of the HOB structure. 4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform. Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8196 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-06TPM: Fix whitespaceKyösti Mälkki
Change-Id: I2d00a2964b16436356c5e02764897e37ef610efc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8343 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05mainboards/asus/kfsn4-dre: Enable native VGA initializationTimothy Pearson
Change-Id: I953ced7d34af9ec0923fa6df93b9ad4270196c77 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8332 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05drivers/xgi/z9s: Port Linux framebuffer initialization to corebootTimothy Pearson
Add native XGI Z9s framebuffer support to coreboot XGI initialization code largely taken from Linux 3.18.5 TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS with SeaVGABIOS enabled. Text appeared correctly on screen and interaction with graphical comboot menu was successful. However, Linux cleared the framebuffer on boot, rendering the screen useless until Linux loaded its native xgifb driver. Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8331 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-05southbridge/amd/pi: write_hpet requires additional config optionDave Frodin
This copies what was done in southbridge/amd/agesa in: commit 56f46d8 agesa/family15tn: Switch to per-device ACPI TEST: amd/lamar. Change-Id: Id8890ccd4a1ea783ad4740333ae6b061b6bbd7fc Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8288 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05southbridge/amd/pi: Update Kconfig and makefiles for boltonDave Frodin
Change-Id: I208c931bdaee572c9df11b35c1e6e9f27609ea6c Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8287 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-05southbridge/amd/pi: Add the bolton definitionsDave Frodin
This adds the PCI and interrupt related definitions for the bolton specific features. Change-Id: Ia6530c57ec5a4a5c4525bfbae0eb5db04c0bef9e Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8286 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-05AMD HyperTransport: Drop unused link optimisationKyösti Mälkki
Change-Id: Ia4398f6eb013c69838487bdd02d094f97d7224b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8342 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05AMD K8: Remove some excessive preprocessor useKyösti Mälkki
Tests on CPUID are valid regardless of revision. Change-Id: I5a3a01baca2c0ecfb018ca7965994ba74889a2e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05newisys/khepri broadcom/blast: Drop duplicate entry in KconfigKyösti Mälkki
Keep the value that is listed first, it also the one with a more recent change. Change-Id: I0336c962544d75f94512563c08f280aa43c7a175 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8336 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05AMD8131: Remove obsolete directoryKyösti Mälkki
Change-Id: I875384e55a4a71d1a5c962d128d13356f3befa56 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8335 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-04superio/fintek: Add required changes so F81216H can be usedDave Frodin
The amd/lamar mainboard is the first mainboard to use the f81216h. These changes are needed to fix up commit 27a63d77 so the Super I/O builds and functions correctly. - Wrong #include name - Removed global variable in romstage - Missing "case" in switch() Change-Id: I1b2058a915b776664fba14e4341e8a410b50330f Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8255 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-03cpu/amd (non-AGESA): Remove terminator from microcode blobKyösti Mälkki
Change-Id: I6370e971922dee5e8d476a883c5f0f32fbbc8911 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-02-03amd/model_10xxx: Drop AMD_UCODE_PATCH_FILE selectionKyösti Mälkki
Include microcode updates in CBFS for every CPU revision the platform can support, as changing to different CPU revision should not require a coreboot rebuild. This increases CBFS usage from 2 kB to 14 kB. Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4521 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-02-03cpu/amd (non-AGESA): Load microcode updates from CBFSKyösti Mälkki
Change-Id: Ic67856414ea2fea9a9eb95d72136cb05da9483fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4502 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-02-03cpu/amd/model_10xxx: Remove UPDATE_CPU_MICROCODE optionAlexandru Gagniuc
This option is now deperecated by loading microcode updates from cbfs. Remove this option in anticipation of implementing CBFS loading for AMD cpus. Removing it beforehand results in less patch overhead. Change-Id: Ibdef7843db686734e2b6b1568692720fb543b240 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8322 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-02-03nvidia/ck804: make Message Signaled Interrupts workJonathan A. Kollasch
Use HT MSI Mapping capability register at 0xe0 in CK804 HT device to enable HT MSI Mapping so that MSIs work. Prior to this change PCIe devices downstream of the CK804 with MSI enabled would fail to actually assert their interrupt. Tested on msi/ms7135 and winent/mb6047 running Debian GNU/Linux 7.0 (wheezy). Change-Id: I5e0dc8b352f3d04e3b16b899af11d2b908a82850 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8276 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-02src/arch/*/include/stdint.h: Provide definitions for bool typeAlexandru Gagniuc
Although bool normally belongs in stdbool.h, for our use cases, providing these definitions in stdint.h is acceptable. Change-Id: I1d0ca1018efacc27d7a4a72aa452912e004401f9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8279 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-02-01winent/mb6047: switch to CAR version of ck804 early_setup.cJonathan A. Kollasch
Change-Id: I9b45b7fbd862a5600ead7ad4e623a8a87ae364aa Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8319 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01winent/mb6047: clean up includes in acpi_tables.cJonathan A. Kollasch
Change-Id: I63bdc856fa4232cd66ff2e48e39c2cdb97bb88d3 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8316 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01winent/mb6047: use correct ACPI SCI interrupt triggerJonathan A. Kollasch
Change-Id: I245c0afb66f3a29b5acb40e8d949d8b1aa08cd73 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8315 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-02-01winent/mb6047: drop inaccurate comment in acpi_tables.cJonathan A. Kollasch
Change-Id: Ib0bb8bed32b96a5f7fd48407bd111972f89e7907 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8314 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01lenovo/x230: Set xhci_switchable_ports and superspeed_capable_ports.Vladimir Serbinenko
Fixes USB3 ports degraded to USB2 speeds. Change-Id: Ie71c9fb6e52a3e72bb1e61351ad1cc0492d93cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/8313 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-02-01bd82x6x/xhci: Set mask of ports switchable between USB2 and USB3.Vladimir Serbinenko
Change-Id: Ica1cc90715c1810668e3f4f7282e5757a5688483 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/8312 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31intel/rangeley: Update UPD_DATA_REGION to support POST-GOLD 2 FSPYork Yang
Rangeley POST-GOLD 2 FSP added PCIe ports de-emphasis configuration by UPD input. Update UPD_DATA_REGION structure for matching up this FSP change. PcdCustomerRevision is a debugging aid that will be output to debug message in FSP. When needed, it can be customized by BCT tool for tracking BCT configurations. Change-Id: I6d4138c9d8bbb9c89f24c77f976dbc760d626a9b Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/8107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-01-31FSP platforms: Clear area in CAR for cbmemMartin Roth
This patch clears the CAR area. The FSP loads the entire CAR area with a pattern instead of clearing it. At least the cbmem area needs to be cleared or cbmem will not use it. Change-Id: I829ddc26133353a784dfc01729af9b3bf427e889 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8195 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31asus/kfsn4-dre: Increase maximum logical CPUs for Istanbul devicesTimothy Pearson
Test: Single Opteron 2419 with 1GB RAM in slot A1 Booted Ubuntu Linux 14.04 and verified all 6 cores were visible Brief stress test of all 6 cores simultaneously Verified proper ACPI power states for all 6 cores Change-Id: I1e598e36f9eaed5ba8a18b9c62ceedee16870f15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8311 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-31cpu/amd (non-AGESA): Fix AP crash during microcode version lookupTimothy Pearson
Move mapping tables to struct and prevent OOB array access that was crashing the APs during CAR initialization. Change-Id: I9e2554b50ad60a8d02ef4bd3fbee6fddb238d83f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-31amd/amdfam10: Update name table with Opteron 2400/8400 series codesTimothy Pearson
Change-Id: I52587c0c0dffd814d39087475b8f14c500a68933 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8309 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-31vendorcode/amd/agesa/f14: update microcodeNicolas Reinecke
05000028 -> 05000029 tested on asrock E350M1 05000101 -> 05000119 Change-Id: Iccb096eb55a4a789c1e810f68c8c8eacfd5f8a0b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8296 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31mainboard/lenovo/t420s/Kconfig: select NO_UART_ON_SUPERIONicolas Reinecke
same as 37130ebdabe44989787aadeafbe79524970dec75 Change-Id: I73feed3a077dfcc61634147775df1e05fdb97e8b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8278 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31intel/model_2065x: update microcodeNicolas Reinecke
Change-Id: I6c13518d2217bc823d409ab800bca011e76e9f25 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8277 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31southbridge/intel/bd82x6x native usb init: replace some magic valuesNicolas Reinecke
Some magic numbers are documented in the PCH datasheet so use them. Change-Id: I15b58ff99b3bc11ac437e5ea74f4f01b7c02032a Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8307 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t530/romstage.c: add usb port description and missing oc configNicolas Reinecke
OC2 at port 4 was missing. Verified with RCBA dump. Change-Id: Ide5701d53aeee28619204c7ac408662626aa11e4 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8304 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t5x0: Make version look like something thinkpad_acpi would acceptNicolas Reinecke
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. same as http://review.coreboot.org/4650 / 63acd22dc5366c72a7165138f5030df9523824dc Change-Id: I82d7a2b9f2ec56557b3a9c26d1af57ed39e31850 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8302 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-30devicetree: Search PnP device node from the tree by pathKyösti Mälkki
Copied from device_util.c with added ROMSTAGE_CONST. Change-Id: If872631ed96a79b9a0b15e09382d6f81098c8db3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8297 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-29asus/kfsn4-dre/Kconfig: Enable power on after power fail by defaultTimothy Pearson
Change-Id: I655843c78d31cc69a007ddaf9b51cde063c48c79 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8299 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-29drivers/intel/fsp: Add find_saved_temp_mem()Martin Roth
Add a function to retrieve the location of the CAR temporary memory that was saved by the FSP into the HOB structure. Change-Id: I2635de5207cd699740721d333a7706425b837651 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8194 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-28mainboards: Add support for the Asus KFSN4-DRE series of motherboardsTimothy Pearson
Status: Tested with KFSN4-DRE PCB v1.04G Booted Ubuntu Linux 14.04 and all onboard peripherals appear to work. Dual Opteron 8347 CPUs tested with 8GB RAM (4GB per bank). Dual Opteron 8356 CPUs tested with 1GB RAM in slot A1. AMD PowerNow! functions correctly via ACPI. Video, network, USB, SATA, and serial have received thorough testing. Tested with KFSN4-DRE PCB v1.05G Single Opteron 2419 CPU tested with 1GB RAM in slot A1. Booted to PXE configuration menu; not tested further. Known issues: RAM initialization is a bit flaky with multiple high-density modules; this could be a generic MCT training issue but is probably bad hardware. The XGI Volari option ROM crashes SeaBIOS v1.7.5, but the video device works after Linux boots and initializes the device. Suspend/resume functions at the S1 level but sometimes hangs on resume. Wake on LAN can be flaky; the strap(s) needed to have WoL work on power application were not physically installed by ASUS so the board needs to boot at least once after power application before it will work. Change-Id: I0709f822eea8ed877f55db9443143028a5400472 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8270 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-28amd/amdfam10: Allocate the lower DRAM region up to TOMTimothy Pearson
This fixes the resource allocator locating the PCI register space below 0xe0000000 thereby causing corruption with more than ~3.5GB physical RAM on AMD Family 10h systems. Change-Id: I66d1bfa1e977a6b492c1909079087a801c7e6a3a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8261 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-28nvidia/ck804: Enable AMD Family 0Fh/10h dynamic ACPI _PSS objectsTimothy Pearson
Change-Id: I682e6c34d059ae21f9767302659bdfdbea86bcc8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8285 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28nvidia/ck804: Add ability to override CK804 base unit IDTimothy Pearson
Change-Id: Ic1b35b6bdd9c6d9ab672242e40b73aff1d626e81 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8273 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2015-01-28amd/amdfam10: Add runtime ACPI _PSS generationTimothy Pearson
Skeleton and ACPI generator interface taken from model_fxx powernow_acpi.c Small portions of FIDVID MSR code taken from model_10xxx fidvid.c Nearly completely rewritten for the P-state-based K10 CPU TEST: KFSN4-DRE with dual Opteron 8356 CPUs Verified CPU per-core dynamic state change with system load Verified reported P-state count and frequencies Stress-tested each CPU (all cores simultaneously) to verify proper P0 transition and configuration. Change-Id: Icf620ec96a3f163b62d96b5988184996641dd439 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8284 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28nvidia/ck804: Fix FTBFS with AMD Family 10h systemsTimothy Pearson
The build failure stems from a missing function being called via a chain including setup_ss_table(), set_ht_link_ck804(), and st_ht_link_buffer_counts_chain(); the latter function is only available in the AMD K8 code. It appears that a bunch of K8-specific code snuck into the CK804 and MCP55 southbridge code in GIT commit 968bbe89 and GIT commit d4b278c0. Change-Id: I85d005edba44c503c49917d4b928e5c9c5900059 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8269 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28nvidia/ck804: Add ability to enable/disable PCIe PME# wake eventsTimothy Pearson
Change-Id: Ie2937dd220464e3b168aa8a50a57c03b6258c189 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8283 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28nvidia/ck804: Fix cosmetics in KconfigTimothy Pearson
Change-Id: Ic675911f534f07516c838b52c9463e89448d4353 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8291 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28nvidia/ck804: Add ability to bypass register 0x78 initializationTimothy Pearson
On the ASUS KFSN4-DRE initializing CK804 0x78 causes an almost immediate soft reset. Leaving the register at its power-on default value appears to have no ill effect on that same board. Change-Id: I833603adea580cb3f4441e35044d1e17d2d67852 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8272 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-28amd/amdfam10: Enhance resource debugging when enabledTimothy Pearson
Change-Id: Ie39652bded9a42d1d816ca5198db59a83e5c083a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8266 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-28northbridge/amd/amdht: Initialize variable `currentBUID`Timothy Pearson
Fix uninitialized variable when manual non-coherent BUID selection is used. Change-Id: Id19745b29486aef5297fdbb3324ae36bf9b8f466 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8267 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-28amd/amdfam10: Serialize mutable ASL methodsTimothy Pearson
Fix three IASL warnings in ASL utility code by making the methods `GWBM`, `GWEM` and `GIOR` serialized. TEST: Built and booted on ASUS KFSN4-DRE. Change-Id: Ia98088bea7e3e21c33252c98a675799d52edb809 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8264 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-27amd/amdfam10/northbridge.c: Fix FTBFS with CONFIG_PCI_64BIT_PREF_MEMTimothy Pearson
Remove declaration of unused variable `io`. Change-Id: I750fc3a135f7634ad16c0f6a1a5bdb16ac702977 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8265 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
Drop the implementation of statically allocated high memory region for CBMEM. There is no longer the need to explicitly select DYNAMIC_CBMEM, it is the only remaining choice. Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Support DYNAMIC_CBMEM with LATE_CBMEM_INITKyösti Mälkki
We can now create CBMEM with dynamic allocation even if CBMEM location is resolved late in ramstage. Change-Id: I8529ccbcd4a0e567ebe0a46232ac5d16476e81a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7861 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27CBMEM: Change some types to uintptr_tKyösti Mälkki
Change-Id: Ib2158c866067f9e2e9bfcf4b117eb8b7a2a819c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8191 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
The name was always obscure and confusing. Instead define cbmem_top() directly in the chipset code for x86 like on ARMs. TODO: Check TSEG alignment, it used for MTRR programming. Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7888 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Tidy up CAR migrationKyösti Mälkki
Move the CAR migration call to arch -specific part of CBMEM init, it is truly a x86 specific thing. Change-Id: I715417e54f197b8745e0670d6b900a5660178141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7860 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 15:53:12 +0000