| Age | Commit message (Collapse) | Author |
|---|
|
On mc_apl2 the external RTC is connected to I2C bus 3. All other I2C bus
devices (16.0, 16.1 and 16.2) have been disabled as they are not used.
While coreboot can handle the case where a PCI device does not have
function 0 enabled but a later one (here function 3), Linux seems to
check for function 0 first and ignores the rest if function 0
is missing. So enable PCI device 16.0 in order to let Linux use 16.3
again.
Test=Boot into Linux and make sure that PCI device 16.0 and 16.3 are
visible and I2C attached RTC works properly.
Change-Id: I55a748b6de8128f4b26b908118feff9f06d3fb7c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add a Nix shell config allowing to build the coreboot documentation.
Change-Id: I1c9715c677342241b78fbdef0afeb4536f48d50f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: Ide854e5c8e2ed507548047cb6e1fad49efaffbb8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:204517112
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic37e7e6757476f1d30bea31fcde4deebebd488a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:204523176
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I36e35522aba2463124b7e6e7046b1a56758b534d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Modify function to set default audio codec HID
to be original setting 10EC5682.
BUG=b:218245715
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I30a1fe2ef8d750616f6907f86a5329f035920504
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: Ie9dbed7d6dd1e5f0c97d4a6cedea3d6bd7b000a2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
Change-Id: I69c4b3cdd2473655064d1329d5319cffdba2425a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
The rom layout for A/B recovery:
EFS -> PSP L1 0x48 -> PSP L2 A -> BIOS L2 A
0x4A -> PSP L2 B -> BIOS L2 B
The coreboot doesn't implement the AMD's A/B recovery. This is only
for the ROM layout. To save some flash space, the entire B section can
be eliminated.
To enable A/B recovery in PSP layout, add "--recovery-ab" to
amdfwtool.
TEST=Majolica(Cezanne)
Change-Id: I27f5d3476f648fcecafb8d258ccb6cfad4f50036
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the information of substance and instance in the string for PMUI
and PMUD. It is amdfwtool's job to extract the number from the string.
Change-Id: I43235fefcbff5f730efaf0a8e70b906e62cee42e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Based on the nivviks and nereid schematics, nissa is using eMMC HS400
mode, so enable this in devicetree.
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ie9772385276d3629079b95024d3ffa04438f22c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Only the info about the location of the EC firmware will be stored right
at the beginning of the flash, so the size can be reduced to 4kByte
which is the erase block size of the flash. The CHAUSIE_MCHP_SIG_FILE
file itself is smaller than this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icde5f7071183cd8423fc022caf49e2c9ee288527
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62189
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3cd66f6b735f7430abcdba8a9323d5ee1320fd4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I1cb517323e7d609ae6624363e116e9814fc631cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
const void is not a proper return type for a function. It's the
function pointer themselves that need to be const.
This fixes building with clang.
Change-Id: I99888ab9d9d80f1d6edb33b9f4a3f556f211a6e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ie9f4562be9b019d8dd65d4e9040fefbb6834fa03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I54c40434f44621c4ea6564ac9c87c5b2fa083b5d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Clang complains about this.
Change-Id: If7af9d5a81c1c381490c9634e3da68ff7f5edda8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I8b209da90b5a591f62e760961c64c4c63e6ef65b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
NixOS 21.11 introduced the option `programs.flashrom.enable`. The option
allows installing flashrom and hooking up its udev rules. Thus, set it
to `true` and add the user `user` to the `flashrom` group allowing it to
use the programmers.
Change-Id: I017ddb4314702a5252dfc0d05cd1e4961043d23b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
'printram(x, ...)' is already defined in 'include/device/dram/common.h' file
Change-Id: I75e19065b9e713df3190202b7ca9e9cd8f3f44a6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds `pmc_mmio_regs` a public function for other IA common
code may need to get access to this function.
BUG=none
TEST=none
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I67a0f7fdcd0827172426bc938569a5022eff16f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch selects SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE config to
reflect the SoC actual behaviour where PMC PCI device is still
visible over bus even after FSP-S exit.
Additionally, add DNV PMC PCI ID into PMC IA-common code.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iaaea20e54c909800e4d75b58c29507fc1944cfba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
|
|
Need to tune I2C bus 0/1/3/5 clock frequency under the 400kHz for
audio, TPM, touchscreen, and touchpad.
Audio CLK: 385 kHz
TPM CLK: 380.5 kHz
Touch Screen CLK: 373.3 kHz
Touch Pad CLK: 372.7 kHz
BUG=b:218577918
BRANCH=master
TEST=emerge-brya coreboot chromeos-bootimage
measure by scope with felwinter.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I3e5cc10d6605f9cc41fa6b31da07a81364b72fe0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Move the EC to a location that does not conflict with where the main
CBFS is in the chromeos FMAP
Change-Id: I28c84cbe2ff10d45383d896ae4f942ee49eb15c0
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62190
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I58851c8a26cad61975f8ba2910eedef3029aab6f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
|
|
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ia63d44de5440b87cedb35ff92edaa0f35ccd75a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I1a72ea63a46dedd1fc2e1e53bf7714ad70ebc5e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Lack of strip made it required to pass arguments to the
kconfig-to-binary macro without spaces. Strip fixed invalid behavior of
this macro.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I9889b45f773b9675fae287086d324c180c505a4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update devicetree according to schematics.
TEST=Build and boot Alder Lake N RVP.
Change-Id: I9faee1cb3539a0246fc6a87e15b3150533de1ee5
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
1. Add eMMC device function in pci_devs.h.
2. Enable eMMC device and configuration based on dev enabled.
3. Add SOC acpi name for eMMC.
Change-Id: I44f17420f7a2a1ca0fbb6cfb1886b1617c5a5064
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Alder Lake N SOC has eMMC device. Add ACPI ASL methods for it.
Change-Id: I53f04e81584493049d37b46e078d394d3c8a2f09
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Change-Id: I6a0e9b33c6a1045a3a4a6717487525b82d41e558
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
|
|
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ieec281e4f1c67e40976892b3dd1780d2f3802df4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Replace HTTP links with paths to Markdown files where possible.
Change-Id: I0ecca6460105b10b81c4fc014f00235b5d9b861c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Fix formatting when text should be bold.
Change-Id: I7a88ddc0a56dba8c05d0997f37121d0f2cc84ce6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: I4272f72dd6ed686dbad5615a0ab44c8c632b5930
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add a site containing general information for GSoC contributors and
mentors. It was initially copied from https://www.coreboot.org/GSoC.
Change-Id: I5c21d026118cba571dc6b817e89cc4da296a1799
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
On Sabrina SoCs the size of the APOB has increased, so the size of the
RW_MRC_CACHE FMAP sections needs to be increased in order for the data
to still fit in the corresponding FMAP partition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib31b918aba90dd507b47aec9e1f75c138857cd02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62155
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unecessary delay in RTD3 _ON Method after PERST# dessartion.
TEST:
2022-02-10T18:22:53.204391Z INFO kernel: [ 0.190287] ACPI: Power Resource [RTD3] (on)
2022-02-10T18:22:53.204395Z INFO kernel: [ 0.194252] ACPI: Power Resource [RTD3] (off)
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I9bc36af6e6c944fcd3de23b7d49640ad9d25642d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Change-Id: Ifd77c90fe82e20df91562fccea8b5d89dd4a193d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This patch creates alias for GEN_PMCON_A to maintain parity with other
IA SoC PMC register definitions.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id9a23c58a325cb544c50cbda432fe3117eea22fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
Added `MS4V` macro for GEN_PMCON_A bit 18 as per EDS doc:558579.
Additionally, removed `PMC_` prefix from PMC configuration register
macros GEN_PMCON_A/B and ETR3.
Moved PMC PCI device macro from pmc.h to pci_devs.h and name PCH_PMC_DEV
to PCH_DEV_PMC. Also, adjust PCI macros under B0:D31:Fx based on
function numbers.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2690ccd387b40c0d89cf133117fd91914e1b71a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Alder Lake SoC deselects Kconfigs as below:
- USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
- USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
to skip FSP notify APIs (Ready to boot and End of Firmware) and make
use of native coreboot driver to perform SoC recommended operations
prior booting to payload/OS.
Additionally, created a helper function `heci_finalize()` to keep HECI
related operations separated for easy guarding again config.
TODO: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects required configs.
BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
HECI: CSE device 16.1 is disabled
HECI: CSE device 16.4 is disabled
HECI: CSE device 16.5 is disabled
BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0198c9568de0e74053775682a44324405746389a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs i.e. Ready to Boot and End Of Firmware.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects all required configs:
BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
HECI: CSE device 16.1 is disabled
HECI: CSE device 16.4 is disabled
HECI: CSE device 16.5 is disabled
BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I70bde33f77026e8be165ff082defe3cab6686ec7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Disable unused USB2/TCSS Ports.
BUG=b:217238553
TEST=FW_NAME=redrix emerge-brya coreboot
Change-Id: I1cdee5b6dc56accb52ba1bf636bdf753a7bfd199
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Support of MENU key (aka hamburger) for Chromebooks with Vivaldi
keyboard
BUG=b:215038215
TEST=manually tested on Anahera device: pressing T13 key opens menu
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: I07873dd9385c743a6512408688ec44a5e97219f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61835
Reviewed-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Lance Zhao
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change copies ec_commands.h directly from the Chromium OS EC repo,
with the exception of changing the copyright header to SPDX format.
Update to commit hash af9a119
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: I1f2a140257d6127fb19bb514bc345466247b7499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I441369bc47ad4758c2188cb4e0f7e971607f72d5
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Compiling efs_fmap_check.c depends on fmap_config.h already being
generated, so add this dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85e0900574f928d1594f8d1831ba58f959b75d27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Also add the Makefile dependency on the fmap_config.h file to make sure
that this file already exists when it's included.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I540ea2c14fd187845efd3c0c8c1e4b8f82c8cac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ie8535d97e883d3fed9414fb5ba65a0797b989c0d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I2fd8470ed2b8e8f00de4ba64258aac1db52744c1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I61f8f39ce7651d499756f4975840f32f89b04ca7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Follow thermal team design to remove TSR3 sensor and update thermal
table for next build. The DPTF parameters were verified by thermal
team.
BUG=b:219690502
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0e34fabe546b6eabb3d3adad583668a15a1d908b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The CIO2 port was incorrectly set to 2, while the correct port is 1
BUG=b:210801553
TEST=Build and boot on vell, camera works correctly now
Change-Id: I53d8448ed0e12777456af9b0bc65a04595b47e37
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61946
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e0b51ee4db73bdff79365d4954a3245a430f140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62051
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e4837489d90c2edd7deaa2af0533085f1ff5ae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62049
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id44213c7dd4d0df97a6c57d7f1b9d950baaf0e1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62047
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie304b08b0b1bbad5547a0169ea8056d703141391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61830
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a4bc1aae8e815b882a607432e40caf1066453b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61828
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I07cef3b619991afb6337c38a631ee159677d30a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61826
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0274f03926d97fc543b98f3fb961580283202806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61825
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I33e4501fd689d642682891c7f5bc9cb7ca5e331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61824
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1940246fd88db29054f85c43672adc97dc90fa04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61823
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3d8a8a7e2b1e490726986139014cdfcf1271c64b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61805
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idb8f30b2d1069aea1d5ce7c5dda7f99de33a7c26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61803
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds two ACPI macros for USB port A and C _PLD object
configuration as:
1. ACPI_PLD_TYPE_A
2. ACPI_PLD_TYPE_C
The configurable parameters are
- Panel, Port is exposed on which face of a panel.
- Horizontal, Horizontal position on the panel where the device
connection point resides.
- Group
- Token, Unique numerical value identifying a group.
- Position, Identifies this device connection point’s position
in the group (i.e. 1st, 2nd).
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I245b17019b6d3c5e380c16cb3c9f4edc4dd10cc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iddf0727a538f2063cfabbec1f900c488331f33c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib0d1be34775c5eacf6cd9b0ec400bd42a93c59e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia9bc235c257abce2a3cd63cfd1b17ac356267d8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic3fbf307bfa42bd377c8f23c1837a6d15cb378e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80d9038d1f41d65201d6bfdb808708f997d71faf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic97d48633ef1f246c181046ec32ab81614ba5ceb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I78734f685672347b06783f834643347a35c59e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e051b21ca55d25c6fc6cfb529078b18adaab2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62028
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0c72a5c5306d63c5fce24bf727704d212d0ad0f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9cef57bbaf3e3519b7f6a7e3d86979722b598ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Guybrush platforms have I2C3 controller which is shared between PSP and
X86. In order to enable cooperation, PSP acts as an arbitrator. Enable
SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is
binded on the OS side.
With this change in place it is important to use correct kernel version
which has I2C-amdpsp driver [1] enabled. Otherwise, we won't have I2C3
available and thus TPM device available in OS, what may end up as a
serious error - guybrush refuses to boot without access to TPM.
BUG=b:204508404
BRANCH=guybrush
TEST=Build proper kernel and firmware. Run on guybrush and verify TPM
functionality.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I9dd94e47e1a02e790427b67adff84de3eb3ee387
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61965
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are platforms equipped with AMD SoC where I2C3 controller
connected to TPM device is shared between X86 and PSP. In order to
handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends
acquire and release requests to be accepted by PSP. An example of
implementation within Linux kernel is available [1].
There is a need to introduce new ACPI_ID ("AMDI0019") so that dedicated
driver on OS side can bind to it and handle this special setup. Since
PSP takes care of I2C controller power management, we need to remove
PowerResource object from DSDT.
BUG=b:204508404
BRANCH=guybrush
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Iccfc09d8c580d7ab2acb69d26b9c293cf625fb34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61863
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chausie EC blob into CBFS at specified location
Change-Id: I48de08a18054efbda655e1563a539ff2ba7a38a6
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Qualcomm CRD devices do not have a fingerprint sensor so removing the
QUP configuration for it. This QUP also coincidentally is the same as
the one used for the TPM, so this initially was also causing TPM
communication issues during bootup as the QUP was being reconfigured
during the later stages after QcLib execution.
BUG=b:206581077
BRANCH=None
TEST=Boot to kernel without any CR50 communication errors
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I8d13b67796b70b0b7e9a4721cca0b8a54b2b27c1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61716
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL supports 8B Bank Architecture, whereas Sabrina supports either BG or
16B Bank Architectures depending on the speed. This influences SDRAM
Density and Banks, SDRAM Addressing bytes in SPD. Encode them as per the
individual SoC advisories.
BUG=b:211510456
TEST=Generate SPDs for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ic854ccccb2b301e75d0f28cd36daf87fd41e07e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
ADL and Sabrina provide different advisories to encode Optional SDRAM
features (byte indices 7 & 9). Encode those bytes as per the respective
advisories.
BUG=b:211510456
TEST=Generate the SPD binaries for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Icac8ae148458162768a919d9690d7bf96734e6c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add wifi sar for vell
BUG=b:218992598
TEST=emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Change-Id: I74fddd1dbcb7019fd5fe394da291f125f0d4960f
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch corrects the DQ mapping and enable ECT. In Vell design,
the DQS is swapped in Mc0.ch1, Mc0.ch3, Mc1.ch0, Mc1.ch1 and Mc1.ch2
but the DQ mappings are not swapped and that causes ECT training
failure.
BUT=b:208719081
TEST=emerge-brya coreboot chromeos-bootimage && ensure the system
passes ECT training and all the way booting to the OS.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Idd2ad16151f0b2b93b00295b75a66ba65cba23cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Spaces before tabs are not allowed.
Change-Id: I0d2c55c2e0108e59facd92b2e2c0f6c418ef6db0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62055
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Spaces before tabs are not allowed.
Change-Id: I1aa8490cb81a77f48d69c16c175eb4fec70dc0db
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62054
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake has CNVI device. Select SOC_INTEL_COMMON_BLOCK_CNVI
for Alder Lake.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I6bf2292e870c990deb63fbf6e841ae7c5c63b3a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Spaces before tabs are not allowed.
Change-Id: I2732c01fd87c56227d47a4c0104de8e227b0cc34
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62018
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The and-mask passed to the gpio_update32 call needs all 32 bits to be
set to ones. When building as 32 bit binary the -1UL will result in the
needed bit mask, but for a 64 bit build the constant would have 64 bits
set to ones which then gets truncated to 32 bits causing a compiler
error. Use 0xffffffff as bit mask instead which behaves correctly in
both cases and also clarifies what this is doing.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b6a50bd914fdbb7a78885efb6c610715e2d26c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62053
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes a build failure when trying to build the code in 64 bit mode.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8fe7b626d9d72c0b8ed07ced93e46f795e36848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I73dc695afb7aa2b32aa966070eb057c828073d47
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=None
Change-Id: Ia73460d335e859644511b7e9ca80111a919baf2c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We only allow index = {0, 1}. Fix the check.
BUG=b:215599230
TEST=Build guybrush
BRANCH=guybrush
Found-by: Coverity CID 1469611
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I59615ab39faeded43b3803b4450c84ab8a8b81ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61988
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not seem to work with 'fall through' in comments.
Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I0487698290992162fac6bb74b5082901415e917e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The google/agah variant will use a peripheral that will require the use
of the PCIe Resizable BAR feature from the PCIe spec. Thus, select
the new Kconfig option to enable it. The appropriate Resizable BAR size
will be updated later.
BUG=b:214443809
TEST=build
Change-Id: I9cf86ba3160ae5018655b5d366e89f4273b30b94
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Section 7.8.6 of the PCIe spec (rev 4) indicates that some devices can
indicates support for "Resizable BARs" via a PCIe extended capability.
When support this capability is indicated by the device, the size of
each BAR is determined in a different way than the normal "moving
bits" method. Instead, a pair of capability and control registers is
allocated in config space for each BAR, which can be used to both
indicate the different sizes the device is capable of supporting for
the BAR (powers-of-2 number of bits from 20 [1 MiB] to 63 [8 EiB]), and
to also inform the device of the size that the allocator actually
reserved for the MMIO range.
This patch adds a Kconfig for a mainboard to select if it knows that it
will have a device that requires this support during PCI enumeration.
If so, there is a corresponding Kconfig to indicate the maximum number
of bits of address space to hand out to devices this way (again, limited
by what devices can support and each individual system may want to
support, but just like above, this number can range from 20 to 63) If
the device can support more bits than this Kconfig, the resource request
is truncated to the number indicated by this Kconfig.
BUG=b:214443809
TEST=compile (device with this capability not available yet),
also verify that no changes are seen in resource allocation for
google/brya0 before and after this change.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I14fcbe0ef09fdc7f6061bcf7439d1160d3bc4abf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
