| Age | Commit message (Collapse) | Author |
|---|
|
The file for Mendocino and Phoenix still used Cezanne in the comment and
from the file it's already clear to which SoC generation this belongs,
so just drop the SoC name from the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73e8b01e46904578226bb64e5e4659016c491880
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76440
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Adder Workstation 3 (addw3) is a Raptor Lake-HX board.
Tested with a custom TianoCore UefiPayloadPkg.
Working:
- PS/2 keyboard
- I2C HID touchpad
- Both DIMM slots with 5200 MT/s memory
- Both M.2 SSD slots
- All USB ports
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- 3.5mm microphone input
- S3 suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.2.7
Not working:
- Discrete/Hybrid graphics
- Thunderbolt
Change-Id: I165a434fe18f8c0aac49cb872bb87f98551d8f2c
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested by booting System76 Adder WS 3 (addw3) and Serval WS 13 (serw13)
to edk2 payload and then OS.
Ref: Intel Raptor Lake EDS, Volume 1 (#640555, rev. 2.8)
Change-Id: I6098e9121a3afc4160c8a0c96d597e88095fd65d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
coreboot logs the error below, since the value of hporch is too small. Increasing hbl from 80 to 174, and hso from 40 to 72 to revise the HBP(Horizontal Back Porch) and HFP(Horizontal Front Porch). After revising this, the actual measurement frame rate is 60.1Hz.
[ERROR]HFP plus HBP is not greater than d_phy, the panel may not work
properly.
BUG=b:284812193
TEST=cbmem -c | grep "ERROR" and measure frame rate
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I7de5984ce8aec12d8ebe292974e05776835330d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76218
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the error messages of checkpatch.pl contain "*". Since now
Gerrit supports markdown, messages with "*" will be rendered
incorrectly. For example,
foo* bar should be foo *bar
will be shown as
foo bar should be foo bar
with "bar should be foo" being in italics. Fix the problem by
surrounding the output message with "`" to make it verbatim.
Change-Id: I02d0e894adf7f94a9e154f99321f51d4097963a5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76392
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This patch updates the MemInfoHob header file as per Meteor Lake
version 3251.81.
Changes include:
1. Drop DimmDFE structure variable
2. Drop unused macro MAX_COPY_DIMM_DFE_TAPS
BUG=b:290898626
TEST=Able to build and boot google/rex.
w/o this patch:
cbmem -c -1 | grep DIMM
[ERROR] No DIMMs found
w/ this patch:
cbmem -c -1 | grep DIMM
[DEBUG] 8 DIMMs found
Change-Id: I8eed410831399bb4835244f48c14d5ed9e701e68
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76433
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per the suggestion in CB:76218, print actual values to the error
messages, which may be helpful for debugging.
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Id3a7a8c76b6ad15e7cf71225d8529f3e034935ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76442
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
When set to 1, the link_compliance_mode element of the DXIO port
descriptor will cause the corresponding PCIe port to not be trained but
to output a compliance testing pattern instead. Update the comment to
point out that this is only a testing mode.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaabb16c51a0c08391cd2d63b8064c524a748ccb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76441
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=b:286803481
TEST=Make screebo suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: I7fd342e52fa0f9126eab4c857a5adc04c26e49c6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76406
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCR (Private Configuration Register) is applicable to access the
P2SB register space starting with the Intel SkyLake generation of SoC.
Prior to Intel Meteor Lake SoC generation, the only P2SB existed inside
the PCH die. Starting with Meteor Lake SoC, there are two P2SB, one in
SoC die (same as PCH die for U/H SoC) and another in IOE die.
This patch renames pcr.asl to pch_pcr.asl to reflect the actual source
of the P2SB IP in the die (i.e., SoC die or PCH die).
BUG=b:290856936
TEST=Able to build and boot google/rex.
Change-Id: Idb66293eaab01e1d4bcd4e9482157575fb0adf04
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76407
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
GMBus is an I2C compatible link on Intel IGPUs. Most non-Linux OS's
don't support accessing this ordinarily, so a custom driver is
needed with a bit of ACPI hackery. Reserve 2 IDs from the
coreboot namespace so that the 2 devices required can be populated
in Windows device manager
Change-Id: I389612441e96ce2fc5e006051e523661953eba6e
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4769f79c67c372e11bb267de3acec0920d7ab0d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80c8a1b58e8102ed11e22b74f30750d5a6c4eae4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76283
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pujjo support WWAN EM060 device, use FW_CONFIG to handle the
power on sequence.
BUG=b:290709711
TEST=Build and check WWAN EM060 power on sequence.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I66800c75274e8e1e55d4314c82b7fcdf2a4477bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76403
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Cannon Lake, which covers Coffee Lake and Comet Lake, has been missing
from the maintainers file. Most unmerged patches for it have recently
been abandoned after 2+ years of inactivity.
Change-Id: Ic381f8efc4a423dca83c36605002aeeabf4bfdd9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
With the latest hardware revision, the polarity of GPP_B5 has been
changed. For a full-populated DRAM configuration, the input signal is
now connected to 3.3 V and for a half-populated configuration it is
connected to ground.
BUG=none
TEST=Use different populated mainboards and check coreboot log
GPP_B5 = 0:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
GPP_B5 = 1:
[DEBUG] 2 DIMMs found
Change-Id: Iaa3a63fa52c802d8f5d8c6cc11dd6edfac117e88
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76434
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify reset_delay_ms from 300ms to 6ms for ELAN EKTH7D18.
BUG=b:285999032
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and touchscreen is workable.
Change-Id: Iffcddbe7735b7a837887dec68e1270c2af5f4556
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76417
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Disable scalability tracking for autonomous frequency control in
order to improve power and performance.
BUG=b:280021171
TEST=Boot to OS on brya0
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: If71ee5374c67611b32691bbec4effdf828b3e566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74723
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Hook the newly exposed EnableHwpScalabilityTracking UPD up so that
boards can configure is via devicetree.
BUG=b:280021171
TEST=Verified by enabling/disabling the UPD on google/brya
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I4c8845c445d46caa30a0245386ab9cd690d2623f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74722
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Hook the newly exposed DisableSagvReorder UPD up so that
boards can configure is via devicetree.
BUG=b:268546941
TEST=Verified by enabling/disabling the UPD on google/brya
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I89235d9384b67f03e68425aadd3458e1c77ff555
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Disable re-ordering SaGv point on warm reset so that most
performant SaGv point is picked after memory training and
boot time is reduced.
BUG=b:268546941
TEST=Observe boot time improvement with these two UPDs set
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I44a1c054d52bb8585a320bb8a52a8f137e639804
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74721
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable upd to reduce size of the memory test.
BUG=b:268546941
TEST=Observe boot time improvement with these two UPDs set
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I95c7d8503596c2712d7abe123ed1f911ac4abacf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Hook the newly exposed LowerBasicMemTestSize UPD up so that
boards can configure is via devicetree.
BUG=b:268546941
TEST=Verified by enabling/disabling the UPD on google/brya
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib813e9f3b7419a3cb54b4e176dcc5cc74a783dfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74718
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
The headers added are generated as per FSP v4221.00
BUG=b:290038558
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I23f6e1e4baa39883475cd93fa6aabcec4e7152cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76147
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
test: Warm reboot from Windows 11 w/ Samsung 980 Pro on Banshee
Verify memory type detected properly and following boot works
Change-Id: Iad0a2024bd0ef39f6ab57ff7a6e6aa651d7882a6
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Avoid enabling SIO UART to prevent conflicts with BMC console; utilize VUART0 instead.
TEST=Build for sbp1 & make sure coreboot logs do not spill into BMC
console. Also made sure coreboot logs are accessible via VUART.
Change-Id: I2d4bbd74bb7d37b74378650dd569bca7fa13c29b
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76396
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Set coreboot ready gpio. This gpio is used to indicate to BMC of BIOS
completion.
Change-Id: Iaed8bec12e593cf1687d973765b0117bdc115cb8
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76404
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables PCH to CPU energy report feature which can be used
by Intel Telemetry Driver.
BUG=b:269563588
TEST=Able to build and boot google/rex and perform below check to ensure
the energy reporting is correct
w/o this cl:
# lspci -s 00:14.2 -vvv | grep "Region 0"
Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K]
# iotools mmio_read32 0x957f8068 #i.e., 104th offset
0xXXXX0000
w/ this cl:
#lspci -s 00:14.2 -vvv | grep "Region 0"
Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K]
# iotools mmio_read32 0x957f8068 #i.e., 104th offset
0xXXXXfc004
Change-Id: I9bd4625ea311a05071878aaec68433a1ba018c0d
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76353
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Only A step ADL-S CPUs were added to CPU table for MP init. Add
the remaining ADL-S CPUs to the table.
TEST=Boot MSI PRO Z690-A with C step i5-12600K and observe coreboot
no longer uses generic CPU ops.
Change-Id: I3692a3f089ca23af860bd1c8e3c29fee9d9234c9
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76204
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I68416e1633c3d67070790a9db2cd9a13a8981042
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In newer ADL/RPL PCH EDS 619362 revision 2.1 the ESPI ID 0x7A8A
belongs to the W790 chipset. Earlier revisions had the chipset with
ID 0x7A8A named W685, which was probably just a temporary name.
Change the naming throughout the tree to W790, which is the real
existing chipset.
Change-Id: I87603298d655e9bf898b34acdd5b403f5affaee3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
CPUID is the same for Alder Lake and Raptor Lake S and HX variants.
To reduce the confusion and concerns how to name the macros, remove
the suffixes from macros and platform reporting strings. Thankfully
the stepping names are unique across mobile (P suffixed) and desktop
(S and HX suffixed) SKUs. Distinguishing the S from HX is possible via
host bridge PCI ID.
Change-Id: Ib08fb0923481541dd6f358cf60da44d90bd75ae2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Add PCI IDs, default VR values and power limits for Raptor Lake S
CPUs. Based on docs 639116 and 640555.
TEST=Tested on a MSI PRO Z690-A (ms7d25) with i9-13900K with Ubuntu
22.10 and LinuxBoot (Linux + u-root). Also tested on MSI PRO Z790-P
with i5-13600K (UEFI Payload) usign RPL-S IoT FSP and Ubuntu 22.04.
Change-Id: I767dd08a169a6af59188d9ecd73520b916f69155
Signed-off-by: Max Fritz <antischmock@googlemail.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69798
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
The static function read_space_firmware() is used only once, so merge it
into antirollback_read_space_firmware(). Also change a debug log to
error.
BUG=none
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: I8abcb8b90e82c3e1b01a2144070a5fde6fe7157f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
The CB:76219 removed mtk_i2c_bus_init() from tps65132s_setup(), so
we should initialize I2C bus for TPS65132 in mainboard now.
BUG=None
TEST=./util/abuild/abuild -t google/geralt -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Iacf78221d2416f41467c709402b7e02e03dc5fc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some of the microcode update files listed in the Makefile are redundant:
* 06-97-02 is exactly the same as 06-97-05
* 06-9a-03 is completely contained in 06-9a-04 (at offset 0x1c400)
So drop these files. This saves us about 200KiB CBFS space in each case.
Change-Id: Idfcab1de26ea4712295c1d22790bab3a73c17f93
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I62f34a12bc5c4807638ddcb39fa5e450d99511fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76277
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iad8b7c705d5053700850065f90314444904b5b54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76289
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Idd623e99ee20ad94e493c8560cfdac9f7baaf890
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76281
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I852d6daebdcb8461c18e7c0eaf1c54ad7c59c0c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If7fe96220ce5b13f5541e25935afd0c681ff40f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76286
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I5728dc144b0d04a92a1e0a4b9abbe17ef0a06e41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76282
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ie44518988e999794fba35f41075ff62e82663d70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76285
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I40b8482f41e8fece55fd60fec7ec3f63f83bd030
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76280
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserving resources needs to have inclusive region ends.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I88a09d205ef9699de7f18e0a2f33c9ad3ce9fa36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76279
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Use newer functions and avoid the * / KiB dance
- Use existing functions for figuring out TSEG and UMA
- Don't have resources overlap
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ia8562660cf69d188b0cab4869aa3190f014dbfdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There is no PCH FIVR participant on MTL and we should remove it
in Rex.
TEST=compile ok and make sure there no TPCH device in acpi
BUG=b:290322310
Change-Id: Icf4be86da3f3cb9b1f0a3f2586b029a533c3e6a9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76402
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Use newer functions and avoid the * / KiB dance
- Use existing functions for figuring out TSEG and UMA
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I5c6dcbc8ed79b79ee097c7a14fe14ed87af33c2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Use newer functions and avoid the * / KiB dance
- Use existing functions for figuring out TSEG and UMA
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I502eeb39c05bd4d00b01976c96884636baf3030c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I61ae378867f8c0d9e86092ebe8deec53800c4717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch drops the unnecessary alignment of 64 bytes that was
introduced when implementing the split Intel microcode packing logic
into CBFS.
- The 16-byte alignment that is already used for Intel microcode is
sufficient.
- Removes unnecessary alignment check of 64 bytes against an AMD
platform specific config.
TEST=Able to build and boot google/rex without any functional
impact.
Change-Id: Icc44e9511e321592de7ab8d1346103d0a9951c9b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76397
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
All requests to acpica.org are redirected to an intel.com site now,
which breaks our buildgcc script as it's unable to download the source
tarball. Use GitHub again as it's a more reliable source.
*rant*
Change-Id: Ie4570539d6c8abe59295e5a29b323b091e939f90
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76399
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The commit 4d8da8ed ("Docs: Update sphinx targets with the build directory")
introduces an additional variable intending to allow an user to specify
a different build directory. Since the variable is not writable from the
outside and also the Docker container used to build doc.coreboot.org
calls the Makefile with `BUILDDIR` instead of `SPHINXDIR`, building the
documentation within the container doesn't work anymore.
Thus, change the variable name to `BUILDDIR` and make it writable.
Steps to reproduce:
cd util/docker
make doc.coreboot.org
make docker-build-docs
Change-Id: Ibc44134cf1996592597252aeb9dcf7ffb3378ee3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
During the ACPI dump of the System Resource Affinity Table (SRAT), it
was noticed that the reserved field within the Memory Affinity structure
contained a non-zero value. This commit addresses the issue by
performing a memset to zero on the reserved field, ensuring the
avoidance of any potential problems arising from garbage values.
TEST= Build for ibm/sbp1 & make sure SRAT Memory Affinity entries
reserved fields read zeroes
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: I4ba697a6bd59054e74c84b98f3d9b517d333a5d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75417
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
for saving boot time, change ramstage compression from LZMA to LZ4.
Boot time saving is around 35ms (30-37ms) while SPI size impact is 230KB.
For detail, refer below.
Existing: LZMA(55.6 ms)
8:starting to load ramstage 894,519 (0)
15:starting LZMA decompress (ignore for x86) 903,556 (9,036)
16:finished LZMA decompress (ignore for x86) 949,997 (46,441)
9:finished loading ramstage 950,179 (182)
Changed: LZ4(17.8ms)
8:starting to load ramstage 900,876 (0)
17:starting LZ4 decompress (ignore for x86) 917,650 (16,774)
18:finished LZ4 decompress (ignore for x86) 918,690 (1,040)
9:finished loading ramstage 918,849 (158)
Size impact (73KB * 3 = 219KB)
fallback/ramstage 0x62940 stage 240281 LZ4 (405524 decompressed)
fallback/ramstage 0x62940 stage 165452 LZMA (405524 decompressed)
BUG=b:286930648
TEST= Boot to OS and check boot time
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I6610f405d287bff2eb4eee6f09026e3361405ded
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi to function properly with the connected bluetooth devices and
wake up from low power state.
BUG=None
TEST=None
Change-Id: I977493fd95a99381279f5a3f5e679e4893369b8a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
|
|
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=None
TEST=Make rex platform suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: Ia98abde584699fa01acba47a9df4ef6332ac16fd
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76338
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The actual NVM size of camera module is 64KB; however, only 8KB is in
use to store data. This reduces the size of both NVM0 and NVM1 to 8KB
to minimize the time taken to read NVM and launch Camera preview.
BUG=NONE
TEST=Launch Chrome camera application and check the time taken to
read eeprom from camera service log and show camera preview. It takes
2 to 3 seconds to show camera preview while it takes 4 to 5 seconds
without the changes.
Before the changes:
06:21:04.204944Z OpenDevice(): camera_id = 1
06:21:07.297584Z Read camera eeprom from eeprom
06:21:08.763491Z Read camera eeprom from nvmem
After the changes:
21:37:23.923676Z OpenDevice(): camera_id = 1
21:37:24.386020Z Read camera eeprom from eeprom
21:37:24.574515Z Read camera eeprom from nvmem
Change-Id: I0e2272b3307fea60ea7406fc6899ae2cb0134fa3
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76189
Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Update eMMC DLL tuning values for improved initialization reliability
BUG=b:289763421
TEST=cold reboot stress test over 5000 cycles on Foresee and Kingston
eMMC
Change-Id: I63077b8717feecf3d50507abb188b7fadb5d6c79
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76221
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iccaeb685ba66112b9e05ed72b57eb840543d7c6a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch skips reading the MEM_CH_SEL GPIO aka GPP_E13 to determine
the memory channel configuration. The signal behavior is not proper,
hence limiting the DIMM capacity to half (only MC0 is enabled).
This patch always reports the full memory capacity as in dual channel
(both MC0 and MC1 enabled).
This change is necessary to ensure that the system reports the correct
memory capacity, even if the MEM_CH_SEL GPIO is not working properly.
BUG=b:290174538
TEST=Able to detect 32GB memory capacity while booting google/ovis.
Without this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 16183080 kB
With this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 32673664 kB
Change-Id: I6c3fa941abb044b79b13785f7b65d09957f0487d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76359
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Since multiple GFX entry causes an ACPI error when trying to write _DOD
method multiple times, combine the GFX entry into one so that _DOD
method is written just once.
BUG=b:289854155
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I22ad70d50f1aecf8da70e8dd04a36a0a7c1c7609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76329
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This CL corrects the trigger for HID over SPI from Level to Edge.
BUG:None
TEST:Tested with I2C and SPI
Change-Id: I78937af22df22d80a702477b6790a7aa40d782a4
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76116
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The AW37503 is designed to supply positive/negative supply for driving
the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we
need to program the registers at boot. We program the target
positive/negative output voltage via I2C and enable the power rails by
pulling up ENP and ENN pins.
On Starmie, we need +/-6V power supply for the MIPI panel. We program
the AW37503 registers in coreboot so that kernel can control AW37503
via fixed regulators without additional settings(what we did for
TPS65132). Since we distinguish AW37503 and TPS65132 by reading the
vendor ID, we need to initialize I2C bus as early as possible.
Therefore, we move mtk_i2c_bus_init() to mainboard_init().
BUG=b:289482828
TEST=emerge-staryu coreboot chromeos-bootimage
TEST=Test the sequence the voltage
Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new kingler follower 'ponyta'.
BUG=b:290259648
TEST=make # select ponyta
Signed-off-by: cengjianeng <cengjianeng@huaqin.corp-partner.google.com>
Change-Id: I74759441957e9901bd7e5a709a2ae7d97a7cd040
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76331
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia756f842943b8e1f1877db7433641e6bbd05f45b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74407
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I889db739d6e006c1753eb8c0d208cf471d09f18d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The BT VGPIOs pad config in variant of gpio.c won't be overwritten on board eventually because no matched gpios existed here.
Put BT VGPIOs in gpio_table, ensure that these were able to be overwritten.
The fix included crota and omnigul BT offload work successfully.
BUG=b:264834572
TEST=test Bluetooth offload playback/capture in SCO profile.
Change-Id: I62cecf26abd0411f7cbb0a56b8b8f0a25d370c69
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
In VBOOT_STARTS_IN_ROMSTAGE=y case, vboot_run_logic() did not
get called when postcar was loaded from TSEG stage cache on
ACPI S3 resume path. Resume failed as MP init attempts to
access microcode update from unverified FW_MAIN_A/B section.
In a similar fashion, for POSTCAR=n, loading ramstage from
TSEG stage cache would bypass the call to vboot_run_logic().
TEST=samsung/lumpy with VBOOT_STARTS_IN_ROMSTAGE=y is able
to complete S3 resume.
Change-Id: I77fe86d5fd89d22b5ef6f43e65a85a4ccd3259d9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add fw_config and configurate AUX pin for MB USB Type-C.
MB USB3 doesn't have re-timer, thus have to configurate the AUX pin.
BUG=b:275335023
TEST=build pass
Change-Id: I1334dcbaec6de1707c6892efbebaf8d460ba8648
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76348
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
EDK2 seems to have problems at least with the resource allocation for
Intel's IGD. While the investigation is ongoing, disable top-down
allocation by default if the payload is known to be EDK2.
Change-Id: I771d8a3b74b54a043624843a00498225d1f509ad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Ticket: https://ticket.coreboot.org/issues/499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76373
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch fixes the boot hang due to commit 053a45bcdb3ccf8 ("cpu/x86/lapic: Fix X2APIC_ONLY regression") on platform which selects X2APIC_LATE_WORKAROUND config.
[EMERG] Switching from X2APIC to XAPIC mode is not implemented.
Without this patch: Boot gets stuck inside at BS_WRITE_TABLES when enable_lapic() gets called after X2APIC mode has been enabled. The fix is to change enable_lapic() to track when late enablement for X2APIC mode happens with X2APIC_LATE_WORKAROUND.
TEST=Able to build and boot google/rex to chromeos.
Change-Id: I41e72380e9cfb59721d0df607ad875d7b6546974
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76384
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current design of the `ucode-<variant>.bin` file combines all
possible microcode per cpuid into a unified blob. This model increases
the microcode loading time from RW CBFS due to higher CBFS verification
time (the bigger the CBFS binary the longer the verification takes).
This patch creates a provision to pack individual microcodes (per CPUID)
into the CBFS (RO and RWs). Implementation logic introduces
CPU_INTEL_MICROCODE_CBFS_SPLIT_BINS config which relies on converting
Intel CPU microcode INC file into the binary file as per format
specified as in `cpu_microcode_$(CPUID).bin`.
For example: Intel CPU microcode `m506e3.inc` to convert into
`cpu_microcode_506e3.bin` binary file for coreboot to integrate if
CPU_INTEL_MICROCODE_CBFS_SPLIT_BINS config is enabled.
Another config named CPU_INTEL_UCODE_SPLIT_BINARIES is used to specify
the directory name (including path) that holds the split microcode
binary files per CPUID for each coreboot variants.
For example: if google/kunimitsu had built with Intel SkyLake processor
with CPUID `506e3` and `506e4` then CPU_INTEL_UCODE_SPLIT_BINARIES
refers to the directory path that holds the split microcode binary
files aka cpu_microcode_506e3.bin and cpu_microcode_506e4.bin.
Refer to the file representation below:
|---3rdparty
| |--- blobs
| | |--- mainboard
| | | |--- google
| | | | |--- kunimitsu
| | | | | |--- microcode_inputs
| | | | | | |--- kunimitsu
| | | | | | | |--- cpu_microcode_506e3.bin
| | | | | | | |--- cpu_microcode_506e4.bin
Users of this config option requires to manually place the microcode
binary files per CPUIDs as per the given format
(`cpu_microcode_$(CPUID).bin`) in a directory. Finally specify the
microcode binary directory path using CPU_UCODE_SPLIT_BINARIES config.
Additionally, modified the `find_cbfs_microcode()` logic to search
microcode from CBFS by CPUID. This change will improve the microcode
verification time from the CBFS, and will make it easier to update
individual microcodes.
BUG=b:242473942
TEST=emerge-rex sys-firmware/mtl-ucode-firmware-private
coreboot-private-files-baseboard-rex coreboot
Able to optimize ~10ms of boot time while loading microcode using
below configuration.
CONFIG_CPU_MICROCODE_CBFS_SPLIT_BINS=y
CONFIG_CPU_UCODE_SPLIT_BINARIES="3rdparty/blobs/mainboard/
$(CONFIG_MAINBOARD_DIR)/microcode_inputs"
Without this patch:
10:start of ramstage 1,005,139 (44)
971:loading FSP-S 1,026,619 (21,479)
> RO/RW-A/RW-B CBFS contains unified cpu_microcode_blob.bin
Name Offset Type Size Comp
...
cpu_microcode_blob.bin 0x1f740 microcode 273408 none
intel_fit 0x623c0 intel_fit 80 none
...
...
bootblock 0x3ee200 bootblock 32192 none
With this patch:
10:start of ramstage 997,495 (43)
971:loading FSP-S 1,010,148 (12,653)
> RO/RW-A/B CBFS that stores split microcode files per CPUID
FMAP REGION: FW_MAIN_A
Name Offset Type Size Comp
fallback/romstage 0x0 stage 127632 none
cpu_microcode_a06a1.bin 0x1f340 microcode 137216 none
cpu_microcode_a06a2.bin 0x40bc0 microcode 136192 none
...
...
ecrw 0x181280 raw 327680 none
fallback/payload 0x1d1300 simple elf 127443 none
At reset, able to load the correct microcode using FIT table (RO CBFS)
[NOTE ] coreboot-coreboot-unknown.9999.3ad3153 Sat May 20 12:29:19
UTC 2023 x86_32 bootblock starting (log level: 8)...
[DEBUG] CPU: Genuine Intel(R) 0000
[DEBUG] CPU: ID a06a1, MeteorLake A0, ucode: 00000016
Able to find `cpu_microcode_a06a1.bin` on google/rex with ES1 CPU
stepping (w/ CPUID 0xA06A1) (from RW CBFS)
localhost ~ # cbmem -c -1 | grep microcode
[DEBUG] microcode: sig=0xa06a1 pf=0x80 revision=0x16
[INFO ] CBFS: Found 'cpu_microcode_a06a1.bin' @0x407c0 size 0x21800 in
mcache @0x75c0d0e0
[INFO ] microcode: Update skipped, already up-to-date
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic7db73335ffa25399869cfb0d59129ee118f1012
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch changes the default behaviour of the MICROCODE_UPDATE_PRE_RAM
config for the platform with FIT (CPU_INTEL_FIRMWARE_INTERFACE_TABLE)
enabled. If FIT is enabled then microcode update will be taken care of
by FIT at pre-cpu reset hence, microcode update at pre-ram phase can be
skipped.
BUG=b:242473942
TEST=Able to build and boot google/rex with MICROCODE_UPDATE_PRE_RAM
remains disabled. No functional impact.
Without this patch:
CONFIG_MICROCODE_UPDATE_PRE_RAM=y
With this patch:
CONFIG_MICROCODE_UPDATE_PRE_RAM is not set
Change-Id: I603e064115869aba2bffa5589ffe47a44a90b848
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz for starting next phase.
BUG=b:270500631
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I0915d9b10dbfae7fff4e8874011951d1690de870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Commit cde4f3b2790d ("acpi/gnvs.c: Drop unused pointer to the cbmem
console") removed writing the coreboot memory console pointer to the
GNVS and kept the CBMC field as reserved. Since those fields aren't
needed any more and there are no dependencies on the absolute position
of the different fields in GNVS as long as both GNVS definitions on the
C and the ASL side match, remove the deprecated and unused CBMC field
from the GNVS structs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iadfaf5a4ec1401b027dbfb6a7c6ce74a1dcecdfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76351
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The function ux_locales_get_text() should expect to have a correct
preram_locales region to read, hence we need to adjust the log levels
inside lib/ux_locales.c:ux_locales_get_text():
* If the region does not exist or is not in a correct format, we should
print in BIOS_ERR
* If the arguments are not correct but we have a good workaround (e.g.
the lang_id from vboot API seems weird), we should print in
BIOS_WARNING.
Also change some minor syntax issues.
BUG=b:264666392, b:289995591
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: Ic8a8856c883f6ca78fed69542a7d388f57c5c508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76316
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Fix below build error after DISPLAY_UPD_DATA is selected:
src/soc/intel/xeon_sp/spr/upd_display.c:131:29: error: variable 'old' set but not used [-Werror=unused-but-set-variable]
131 | const FSP_S_CONFIG *old;
| ^~~
src/soc/intel/xeon_sp/spr/upd_display.c:130:29: error: variable 'new' set but not used [-Werror=unused-but-set-variable]
130 | const FSP_S_CONFIG *new;
Change-Id: I43ed5fadab58e0d4dc824457c7a1bdf48511198e
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76342
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove BUILD_TIME_STAMP_SIZE macro from coreboot because FSP 3223
version have BUILD_TIME_STAMP_SIZE macro defined as part of
`FspProducerDataHeader.h`.
Ref change:
9c28ab1d1a vc/intel/fsp/mtl: Update header files from 3194_81 to 3223.80
BUG=b:285110116
TEST=Able to build google/rex.
Change-Id: I52707adf1aa6dadca8dcf82102f76916a0cfe346
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Use the _tohex function to convert values to hex instead of 'shell
printf'
TEST=timeless builds identical for grunt,dalboz,guybrush,chausie,birman
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic7f7d1b764479088cc0980b208d8d603bc712832
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76314
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
constitution only has one TBT port, remove tcss_dma1.
BUG=None
TEST=emerge-constitution coreboot
Change-Id: Ia4eb4371eb20e75a0f464e2b087fd2fe59569537
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
|
|
Add a new apcb edit tool, apcb_v3a_edit.py, that injects SPDs into
an APCB for phoenix platform.
The tool makes several assumptions:
* Each SPD only uses blocks 0, 1, 3 and 5. All other blocks are zero.
* Each block is 64 bytes.
* Dimm and socket are always 0
* Unused SPD entries are zero'd
BUG=b:281983434
BRANCH=None
TEST=build, flash, boot myst
Change-Id: Ifb50287de77138170714a702ab87d56427aacfef
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76188
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The Makefile was passing `CONFIG_SMMSTORE_v2` which doesn't exist.
Correct this to `CONFIG_SMMSTORE_V2`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I984d2155143c14cb4a347ed24688b9ea492f7f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76317
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Fix regression introduced with commit 01af0f8ac803 ("acpi/acpi.c: Reduce boilerplate").
DSDT table is not to be listed within RSDT/XSDT, ACPICA and/or OSPM may
try load it twice raising conflicts in the namespace and effectively ignoring all or most of the AML.
Change-Id: I0e6d07b35522f2bf9a51cef0a7e3181b15087d88
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Always exit 4-byte addressing mode to prevent errors when the spi flash
is not left in 4-byte addressing mode.
TEST=boot with PSP releases that leave the flash in both 4-byte
and 3-byte mode and verify flash writes
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9884b85bc3b0a9b654a2cb91fb314b0869abd622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76094
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO GPP_B5 is used as input on this mainboard. For a full-populated
DRAM configuration, the input signal is connected to ground and for a
half-populated configuration it is connected to 3.3 V.
BUG=none
TEST=Use different HW configurations and check coreboot log
GPP_B5 = 0:
[DEBUG] 2 DIMMs found
GPP_B5 = 1:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
Change-Id: I48b4a3bea7f1ff804b78b7c648a7ea1925627b8a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76245
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There can be mainboard variants, which are only equipped with
half-populated DRAM. For this reason, the meminit parameter for
populatation should be adjustable. The default setting remains at
full-populated DRAM. At mainboard variant level a different selection
via individual input paths can be made.
Change-Id: I390bbfa680b5505bb2230fa0740720bd9dd1fafb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76244
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Align implementation with real hardwares, such that ECAM
(PCI configuration via MMIO) is available for use when
console is initialised.
Change-Id: I288991f31d3f1678132aa4315168c09eabbbe98d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76206
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I7e2018dbccead15fcd84e34df8207120d3a0c57c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64303
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
At the time of writing SMM runtime does not make register
accesses to LAPIC registers, but such breakage has been
reported.
S3 resume failure, where OS switched back from X2APIC
to XAPIC mode, can be reproduced with a sandybridge SKU
that has VT-d disabled.
Change-Id: I300ba87c3d8fde548dbaf95703bd7e2fe54cff57
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Some ancient CPUs may have had LAPIC disabled at power-up, so
semantically enable_lapic() should always come before attempting
to access the register banks.
With X2APIC_ONLY option it is necessary to ensure enable_lapic()
is called prior to any other lapic register space accesses,
since the XAPIC mode MMIO accessors are optimised away build-time
and CPU's do not yet initialise for X2APIC mode at reset.
Change-Id: I96eaa5c43108c802375e184e0c68b5091ca0198f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76195
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This devices is always present so hooking up the ops in devicetree makes
more sense.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I369129e365ce8596cad25b97d12168bb08e3ed0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76241
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
None of these boards have an RTC battery, so this option has no
effect. Remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9a55227f74c0b9ae9b56bdef4b8f53b2425b331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
It is not needed, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I606d0a76926e90e4ce321163400aa50ea961c2a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75342
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Update header files for FSP for Meteor Lake platform to version 3223_80,
previous version being 3194_81.
FSPM:
1. Add 'ROWHAMMER','RhSelect','McRefreshRate','Lfsr0Mask','Lfsr1Mask'
UPDs
2. Add 'TmeExcludeBase','TmeExcludeSize','GenerateNewTmeKey' UPDs
3. Address offset changes
BUG=b:287890130
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I4b8d0a3a87be7dc0d899298eb8e4e48905090e71
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75916
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AB-MGCL (Samsung)
2. K4UBE3D4AB-MGCL (Samsung)
BUG=b:289873670
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7a262ac62c24cfb43c0283c9730c177a242342e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76240
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rather than repeat the same line multiple times, save it in a variable
once and use that variable in the rest of the file.
TEST=timeless birman build identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I4eb262adb3bbda04add79b2e2b8bee9a609a1e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76197
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Pass the APOB NV address as a flash offset instead of x86 address.
TEST=boot birman and verify APOB_NV is working
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I0f710f12cc5d933a75840dbce1c4bad0c2ea04cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76162
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 8be5a82:
2022-10-04 14:01:00 +0000 - (Fix "unnecessary with of ancestor [-gnatwr]")
to commit id 95ad8c5:
2022-12-22 15:32:38 +0000 - (hw-debug: Place global variables in the .bss section)
This brings in 1 new commits:
95ad8c5 hw-debug: Place global variables in the .bss section
Change-Id: Ib28dbcdf14f313cbfeab03e98e05fffe16a1b708
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75794
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
