| Age | Commit message (Collapse) | Author |
|---|
|
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM
features from RTD3.
BUG=b:244077118
TEST=check cbmem -c
\_SB.PCI0.RP06: Enable RTD3 for PCI: 00:1c.5 (Intel PCIe Runtime D3)
\_SB.PCI0.RP06: Enable WWAN for PCI: 00:1c.5 (Fibocom FM-350-GL)
check PXSX Device is generated in ssdt.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I6114c589769d2eca882cf1a5255cf4c5937121a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new ram_id:3 (0011) for memory part K3LKCKC0BM-MGCP.
DRAM Part Name ID to assign
K3LKCKC0BM-MGCP 3 (0011)
BUG=b:247039096
TEST=Use part_id_gen to generate related settings and
emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I78d2e501b9d8d801a3d149002f638125bf4275f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
The µcode updates for Broadwell come from coreboot's blobs submodule
and have not been updated in at least 7 years. Use the µcode updates
available in the intel-microcode submodule. This change forgoes some
µcode updates for old Broadwell ULT/ULX steppings with CPUID 0x306d2
and 0x306d3, as well as an old µcode update for Haswell ULT/ULX CPUs
with CPUID 0x40651 in favor of a newer intel-microcode revision that
was already being used: when the µcode updates are concatenated into
one file, the newer µcode update revision would be placed before the
older revision, so the latter would never be used.
Change-Id: I67f8a58552bd211095c183e6f7a219d60e3be162
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Commit 27126f135dad3c0e2f91394e7088b2ff50220146 (cpu/intel/haswell: add
Crystal Well CPU IDs) introduced new Haswell CPUIDs but did not include
any µcode updates for them. It is unknown how this could have worked as
the initial µcode inside the CPU can be quite unstable. Intel CPUs with
support for FIT (Firmware Interface Table) can have their µcode updated
before the x86 reset vector is executed.
The µcode updates for Crystal Well CPUID 0x40661 can be found inside the
intel-microcode submodule. There are no publicly available µcode updates
for Crystal Well CPUID 0x40660 as it is a pre-production stepping, which
is not meant to be used anymore. Hook up the available µcode updates for
Crystal Well CPUs.
Change-Id: If5264f333e681171a2ca4a68be155ffd40a1043b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
There are two types of Haswell/Broadwell platforms: Trad(itional) with
separate CPU and PCH packages, and ULT/ULX where the CPU and PCH share
one package. Mainboards can specify which platform type they are using
the `INTEL_LYNXPOINT_LP` Kconfig option. There are so many differences
between Trad and ULT/ULX that it's not worth doing runtime detection.
The CPUIDs are different for Trad and ULT/ULX platforms, and so are the
µcode updates. So, including Trad µcode updates in a coreboot image for
an ULT/ULX mainboard makes no sense, and vice versa.
Adapt the Makefile so that only relevant µcode updates are added. Also,
add a few comments to indicate which updates correspond to which CPUs.
TEST=Run binwalk on coreboot.rom to verify included µcode updates for:
- Asrock B85M Pro4 (Haswell Trad)
- HP Folio 9480M (Haswell ULT/ULX)
- Purism Librem BDW (Broadwell ULT/ULX)
Change-Id: I6dc9e94ce9fede15cbcbe6be577c48c197a9212a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Builds are failing on upstream master branch because there is no
board_info.txt for the Intel Meteor Lake RVP mainboard; this patch
adds a basic one so the tree will build.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3356ad65132dc4aaebd5e7d959a2bdb9ab1316b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67711
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Modify config settings based on new module KBAE350 spec
BUG=b:245640845
BRANCH=None
TEST=Build and boot on skolas
Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Change-Id: I8a9bee9bb79bda4e3f1d259716844b42a7fce397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jimmy Su <jimmy.su@intel.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
FSP-M is not run XIP so it can be compressed. This more than halves
the binary size. 364544 bytes -> 168616 bytes.
On the up/squared this also results in a 83ms speedup.
TESTED: up/squared boots.
Change-Id: Ic76b51f0f3007b59ccb9f76b6a57bb9265dab833
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
On the intel/glkrvp
compressed:
- romstage: 29659
- verstage: 31303
non compressed:
- romstage: 46244
- verstage: 47012
On qemu (with some additional patch to not run XIP)
compressed:
- romstage: 11203
non compressed:
- romstage: 13924
Even with a small romstage the size improvements are substantial,
which should result in a speedup when loading the stage. On the
up/squared loading romstage is sped up by 9ms.
TESTED: successfully boot the up/squared & google/vilboz.
Change-Id: Iac24d243c4bd4cb8c1db14a8e9fc43f508c2cd5d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This adds 32MB flashmap descriptor as below:
Descriptor Region: 0x0 - 0x3fff (~16KB)
Intel EC Region: 0x4000 - 0x83fff (~512KB)
ME Region: 0x84000 - 0x8fffff (~8.5MB)
BIOS Region: 0x900000 - 0x01ffffff (~23MB)
BUG=b:224325352
TEST=util/abuild/abuild -p none -t intel/mtlrvp -a -c max
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ifb572efe56eb7400b8328ba797892738f5927158
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66098
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie7d40395d754b2abdf9079d6ee5e8ab8c536d449
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67661
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I35185b498315511f3236758caebfe2f9c28fd04a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65039
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust the EEPROM layout to account for two new fields: board part
number and product part number. In addition, put them in a Type 11
SMBIOS table (OEM Strings).
TODO: This currently stores the "raw" part numbers, should we add a
prefix to the SMBIOS strings?
Change-Id: I85fb9dc75f231004ccce2a55ebd9d7a4867fcb93
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67276
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use dynamic power and thermal configuration (DPTC) via ACPI ALIB calls
to throttle the SOC when there is no battery or critically low battery,
to enable the SOC to boot without overwhelming the AC charger and
browning out.
DPTC is not enabled for low/no battery mode with this CL. It will be
enabled for Skyrim in a following CL.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ifeddb99e97af93b40a5aad960d760e4c101cf086
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67189
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for DPTC by calling SB.DPTC() as part of PNOT().
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ifc332bfc4d273031c93b77673224b4f3c2871fb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67694
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the Low/No Battery Mode DPTC values for Skyrim.
These values were generated by AMD.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I5f277761cb7379b4344492f95010d8d5ddd689fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67693
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add DPTC Low/No battery VRM limit registers to throttle the SOC.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I9c4ed227b54efbab9f03d6acf64b1160ad73f460
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67692
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the DPTC VRM limit values for normal mode.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I2041a713323f039dcfdacdfa43e74cf450c3c0d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67691
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the Normal Mode DPTC values for Skyrim.
These values were generated by AMD.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I1e1f55b941f3e70aad33d55a90fb012eac3ba12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67690
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VRM DPTC limit registers. These are required when throttling the SOC
for low/no battery mode to prevent the SOC from overwhelming the
charger.
b/245942343 is tracking passing these additional fields to the FSP and
having the FSP configure them.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ie62129d967192f9a9cf654b1854d7dbe4324802a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67378
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update acpigen_write_alib_dptc() to support "low/no battery mode",
which throttles the SOC when there is no battery connected or the
battery charge is critically low.
This is in preparation for enabling this functionality for Mendocino.
BUG=b:217911928
TEST=Build zork
TEST=Boot nipperkin
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Icea10a3876a29744ad8485be1557e184bcbfa397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66804
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are platforms equipped with AMD SoC where I2C3 controller
connected to TPM device is shared between X86 and PSP. In order to
handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends
acquire and release requests to be accepted by PSP.
Introduce new CONFIG for Mendocino SoCs similar to what we have for
Cezanne.
BUG=b:241878652
BRANCH=none
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I015a24715271d2b26c0bd3c9425e20fb2987a954
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
ELAN6918 Power Sequencing seems not perfectly matching
with the previous platforms and setting GPP_C06 to high prior
to the power sequencing is actually makes it work.
Ideally Power Sequencing should be as below for ELAN6918 (in ACPI)
`POWER enabled -> RESET deasserted -> Report EN enabled`
But below sequence is only working currently:
`Report EN enabled (ramstage) -> POWER enabled (ACPI) -> RESET
deasserted (ACPI)`
BUG=b:247029304
TEST=Verified ELAN touch panel is working as expected after booting
Google/rex device to ChromeOS.
Change-Id: Ideaeb0faa882b8e603534bbface51ea76923d436
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The brya4es variant is no longer needed, removing code for brya4es.
BUG=b:246611270
TEST=None
Change-Id: I9b222f89fe766c63158518713be19d7959451721
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Since there are no legacy devices on the variant mc_apl7 do not wait
for them on mc_apl7.
Change-Id: Ia4e6c0fb495a347be51bd6604a1d9b73098fb7b6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67684
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Test build for QEMU x86 i440fx/piix4.
Change-Id: I3144a83fcbd92eec51d70e9be33ff2fcb2821731
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67416
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I81a8371190513ca34d3c5efb0e3770ac3d873b03
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The lbtable contains the memory entries that have fields unnaturally
aligned in memory. Therefore, we need to perform an aligned_memcpy() to
fix the issues with platforms that don't allow unaligned accesses.
BUG=b:246887035
TEST=cbmem -l; cbmem -r ${CBMEM ID}
Change-Id: Id94e3d65118083a081fc060a6938836f6176ab54
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
gcc12+ will require riscv architecture selection to come not only with
featurei suffixd charactersa, it also comes with feature_ful suffix_ed
words_mith. Much creative, very appreciate.
To accommodate for this madness, enable the already existing (but off by
default) support for that in our gcc11 build, support using by detecting
the compiler's behavior in xcompile and pass that knowledge along to our
build system.
Then cross our fingers and hope for the best!
Change-Id: I5dfeed766626e78d4f8378d9d857b7a4d61510fd
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Create an NVRAM space in TPM 2.0 that survives owner clear and can be
read and written without authorization. This space allows to seal data
with the TPM that can only be unsealed before the space was cleared.
It will be used during ChromeOS enterprise rollback to securely
carry data across a TPM clear.
Public documentation on the rollback feature:
https://source.chromium.org/chromium/chromiumos/platform2/+/main:oobe_config/README.md
BUG=b/233746744
Signed-off-by: Miriam Polzer <mpolzer@google.com>
Change-Id: I59ca0783b41a6f9ecd5b72f07de6fb403baf2820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch attaches the smbus console functions to the high
level console interface.
Change-Id: I3a9bf64e59d529253bfdcdfa565bb2bb92975728
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67341
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMBus is typically enabled in the ROMSTAGE. To get the
BOOTBLOCK console message, the SMBus should be enabled
in the BOOTBLOCK stage.
Change-Id: I97d0afb013ede428383acaa0aa97ab04fe80e2a4
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67340
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new smbus console driver and Kconfig
options to enable the driver.
Change-Id: Ife77fb2c3e1cc77678a4972701317d50624ceb95
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67339
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Q0 stepping has a different ID than P1.
Reference: CML EDS Volume 1 (Intel doc #606599)
Change-Id: Id1da42aa93ab3440ae743d943a00713b7df3f453
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ifd25416c55c4dba1709f74cdedc0c58e881d6266
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
coreboot doesn't support the MIPS architecture anymore.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I404d034949a7786d7971117081537baf27ff2e22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
unneeded 'enable-plugins' option sneaked in..., so remove it.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id1d7f2c7e6b70c28e1060c6ee915363ffe412ef6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
'enable-interwork' is not a binutils configure option.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I29cd6137c700ff6871868a723daf33909aa218ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65609
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Using malloc would increase the heap use each time this function is
called. Instead allocate a per struct device buffer inside the
chip_info struct.
Found by coverity scan, CID 1488815.
Change-Id: Ie24870b34338624b3bf3a6f420debdd24a68ffbd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64338
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable nau8825 ADCOUT to make I2S signal meet spec.
BUG=b:234789689
TEST=I2S waveform can meet spec timing.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7ea472ac4e4add4e790b9b3fbb6becd40665eb1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add a property to control the driving of ADCOUT.
BUG=b:234789689
TEST= build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ibbedd5838a795ee645a5458b960062c5530ff3b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The patch updates comment on HFSTS1.spi_protection_mode.
The spi_protection_mode indicates SPI protection status as well as EOM
status (in a single staged EOM flow). Starting from TGL platform, staged
EOM flow is introduced. In this flow, spi_protection_mode alone doesn't
indicate the EOM status.
For information on EOM status, please refer secton# 3.6.1 in doc#
612229.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I19df5cfaa6d49963bbfb3f8bc692d847e58c4420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I2f2cd20139f4cdb7ba665e9e49a03faea1ac085b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit 510a55d4eeaeb32047c17328ef238b55b89e7296.
Reason for revert: Observed `missing read resource` issue for
cnvi device
BUG=b:244687646
TEST=No error seen in AP log while booting Google/rex
Without this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[ERROR] GENERIC: 0.0 missing read_resources
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
With this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e881313729f1088cffa7c161722ee79bb9acc49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67566
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
TEST=Able to build and boot Google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I64aab8391f89414754785cea47671f3350324297
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
TEST=Able to build and boot the Google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iae5317b24856ef2cbd2f36cc28f645826536c21a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any
skyrim boards, similar to mainboard/google/zork/Kconfig. This makes the
value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=emerge-skyrim coreboot
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I73fca5a16826313219247f452d37fb526ad4f4df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any
guybrush boards, similar to .mainboard/google/zork/Kconfig This makes
the value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=emerge-guybrush coreboot
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I07f1266fa80a6c9ee4ec3b3ba970a70c6c72fb54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Moving the config value SOC_AMD_COMMON_BLOCK_ACPI_DPTC to
soc/amd/picasso/Kconfig and conditionally enabling it for only Morphius
boards makes the value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=Build zork
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic54a9bb491234088be8184bec8b09e2e31ffa298
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
AMD CPUs have a convenient MSR that allows to set the SMBASE in the save
state without ever entering SMM (e.g. at the default 0x30000 address).
This has been a feature in all AMD CPUs since at least AMD K8. This
allows to do relocation in parallel in ramstage and without setting up a
relocation handler, which likely results in a speedup. The more cores
the higher the speedup as relocation was happening sequentially. On a 4
core AMD picasso system this results in 33ms boot speedup.
TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM
is correctly relocated with the BSP correctly entering the smihandler.
Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Some PCI IDs were missing, and at least one (SPT's fast SPI
device in a generic SPI driver) was wrong. Hence, this patch
actually changes behavior depending on the devices actually
present in a machine.
In this patch the Skylake devicetree is written in a single-line
style. Alternative, the device operations could be put on a separate
line, e.g.
device pci 00.0 alias system_agent on
ops systemagent_ops
end
Tested on Kontron/bSL6. Notable in the log diff is that the
CSE and SATA drivers are hooked up now.
Change-Id: I8635fc53ca617b029d6fe1845eaef6c5c749db82
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently we only have runtime mechanisms to assign device operations to
a node in our devicetree (with one exception: the root device). The most
common method is to map PCI IDs to the device operations with a `struct
pci_driver`. Another accustomed way is to let a chip driver assign them.
For very common drivers, e.g. those in soc/intel/common/blocks/, the PCI
ID lists grew very large and are incredibly error-prone. Often, IDs are
missing and sometimes IDs are added almost mechanically without checking
the code for compatibility. Maintaining these lists in a central place
also reduces flexibility.
Now, for onboard devices it is actually unnecessary to assign the device
operations at runtime. We already know exactly what operations should be
assigned. And since we are using chipset devicetrees, we have a perfect
place to put that information.
This patch adds a simple mechanism to `sconfig`. It allows us to speci-
fy operations per device, e.g.
device pci 00.0 alias system_agent on
ops system_agent_ops
end
The operations are given as a C identifier. In this example, we simply
assume that a global `struct device_operations system_agent_ops` exists.
Change-Id: I2833d2f2450fde3206c33393f58b86fd4280b566
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I664f5b7d354b0d9a7144c25604ae4efbdd9ba9a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie5fc0a8230cdcc24ad1d2d94cc6d019ff10aac48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia2508abe62a194f2921d5535937ba82a60967ca3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I3def65c016015d8213824e6b8561d8a67b6d5cf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BIOS_ERR is inappropriate since the message is informational.
Use BIOS_INFO instead.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I91be3f47ae93c8262e430a06cacec3d2c29ebd58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
parse_microcode_blob() returns success when it reaches max_fit_entries
microcode. It makes the FIT table size verification in
fit_add_microcode_file() useless. This patch makes
parse_microcode_blob() error out if max_fit_entries is reached.
Note that this size verification is critical as a FIT table only
partially listing the microcode patches can lead to boot failures as
recently observed on Raptor Lake-P.
BRANCH=firmware-brya-14505.B
BUG=b:245380705
TEST=compilation errors out when trying to stitch more than
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES microcode patches.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Id9c5fb6c1e264f3f5137d29201b9021c72d78fde
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67454
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
|
|
Haswell and Broadwell platforms usually stitch six microcode
patches. It has worked so far with the default value of four thanks a
bug which is being fixed by `util/ifittool: Error out if microcodes do
not fit the FIT table' commit.
BUG=b:245380705
TEST=Jenkins build without failing on the FIT table size
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I23bf79a3e8918499f6c51e6ef829312d5872181a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move enabling SOC_AMD_COMMON_BLOCK_ACPI_DPTC from
soc/amd/picasso/Kconfig to mainboard/google/zork/Kconfig and
conditionally enable it only for Morphius boards.
This reduces which boards/variants have DPTC enabled to only those that
actually use it.
BRANCH=none
BUG=b:217911928
TEST=Build zork
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Iddebcf5dbadae135c8110e2afd9ad76ef7dcc09d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67637
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Conditionally include dptc.asl based on the Kconfig value
SOC_AMD_COMMON_BLOCK_ACPI_DPTC.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Build guybrush
TEST=Build skyrim
TEST=Build majolica
Change-Id: Idd94af8e8b2d7973abc0fb939e4600189e21656a
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67620
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the FSP binary check logic is fixed to only check the FSP files
if ADD_FSP_BINARIES is selected, the default paths for the not yet
published Cezanne FSP binaries can be added without breaking abuild.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9950a1fe7bd1b21109cca9631de1a8f1d265d9b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Only check if the FSP_M size is small enough to fit inside the memory
region reserved for it if ADD_FSP_BINARIES selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6a115412c113eb0d02b8d4dfc2bb347305f97809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
As of commit 2cf52d80a6ec ("mb/*/{device,override}tree: Set touchpads to
use detect (vs probed) flag") all touchpads in the tree have been
switched from using the 'probed' flag to 'detect.' Add a lint check to
ensure no touchpads are added with the probed flag.
TEST=manually change one touchpad to use 'probed' flag and ensure lint
check catches it.
Change-Id: Ie0aee2e3778fc56c6c21c97995738a147a1fa0d4
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67486
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This file isn't correct, since the Stoneyridge SoC doesn't have a legacy
PCI bridge on bus 0 bridge 0x14 function 4. Google/Kahlee doesn't select
HAVE_PIRQ_TABLE, so it's likely safe to also not select it for this
board.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibaf470b9ff7823019772d43af98ebc47af395728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This file is neither included in the build nor correct, since the
Stoneyridge SoC doesn't have a legacy PCI bridge on bus 0 bridge 0x14
function 4.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0daed891984faed9fbc36f0215edfc56e0ae14a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
As of commit 2cf52d80a6ec ("mb/*/{device,override}tree: Set touchpads to
use detect (vs probed) flag") all touchpads in the tree have been
switched from using the 'probed' flag to 'detect.' Winterhold was added
in between the time that patch was pushed and merged, so switch these
instances over too.
Change-Id: I34e1265ecd6409f720ae486926c5078f626fc693
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67487
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Locking SMM as part of the AP init avoids the need for
CONFIG_PARALLEL_MP_AP_WORK to lock it down.
Change-Id: Ibcdfc0f9ae211644cf0911790b0b0c5d1b0b7dc9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64871
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7c457ab69581f8c29f2d79c054ca3bc7e58a896e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64870
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is the same for all supported AMD hardware.
Change-Id: Ic6b954308dbb4c5a2050f1eb8f15acb41d0b81bd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67617
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Being divided by 1000 causes data loss and the loss is expand by
muliplication.
So we just set a lower divisor before muliplication.
BUG=b:185922528
Change-Id: Ib43103cc62c18debea3fd2c23d9c30fb0ecd781b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
That's 3 years of development, including adapting to new, shiny,
Cascade of Attention-Deficit Teenagers[0] induced incompatible
assembler syntaxes.
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
[0] https://web.archive.org/web/20220824045741/https://www.jwz.org/doc/cadt.html
Change-Id: I8606700149ca74e93b85d78546a29df2916d39b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add support for having different Security Patch Level (SPL) table files
in the read-only and the read-write A/B partitions. This allows the SPL
table file in the main or RO FMAP partition to only cover the embedded
firmware binaries in that partition and have a separate SPL file in the
RW A and B partitions that covers the embedded firmware binaries in the
RW partitions.
BUG=b:243470283
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1ba8c370ce14f7ec88e7ef2f9d0b64d6bb4fa176
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Turn off the LAN power which is controlled by GPP_A10 in S0ix states.
For an USB device, the S0ix hook is needed for the on/off operationas
to take place.
BUG=b:245426120
BRANCH=firmware-dedede-13606.B
TEST=emerge-shotzo coreboot
check LAN LED off in S0ix states
check LAN function ok after suspending 500 loops
check SSDT table has MS0X entry
Scope (\_SB)
{
Method (MS0X, 1, Serialized)
{
If ((Arg0 == One))
{
\_SB.PCI0.CTXS (0x41)
}
Else
{
\_SB.PCI0.STXS (0x41)
}
}
}
Change-Id: I3fcab4a73239b4f006839c0c81e9b4cc74047b77
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Looks like somewhere after the original implementation it was renamed to
--enable-multilib without the s.
'enable-multilibs' is not a valid option for binutils.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I105cc9fa489aed24905dedb785c70bc69ed18970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65608
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Log the Host Partition Reset Causes (HPR_CAUSE0) register, as done on
newer platforms.
Change-Id: I35261cefae67649fb7824e5ef3d7eb10add36a53
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I478265dcd070dcf3fb2cf2c535b6ca1d86b9a3f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I9cf4097518034fa4c3ae1899840ae3a276936f80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67581
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I6d0d945011fa046b974c6f4554cb9fb15e523afb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67578
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some PLLs are not used in firmware, so we should keep them as hardware
default values. If their modules want to set them, the corresponding
drivers should set them in the kernel stage.
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I9bee18005ffed7fc1785c7fd3c0370c8293064ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67547
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: I567d1ded1c3b5e36a25026cec697d43d92d5524c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67546
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vpp_sel and ethdr_sel are vdosys clock source select mux.
Steps to change to support 4K source:
1. Change vpp_sel source to mainpll_d6 to run at 416MHz.
2. Change ethdr_sel source to univpll_d6 to run at 416MHz.
BUG=b:233720142
TEST=build pass.
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I24f133b9b383fd019983cb29a213b47717148e97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67545
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To improve boot time, raise little CPU from 500MHz to 2GHz at romstage
(before DRAM calibration).
FW logs:
Check CPU freq: 1999968 KHz, cci: 1600012 KHz
TEST=cpu freq and cci freq run correctly.
BUG=b:244251006
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic1bed53669baa15f797c9a952455376a39d29cf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67544
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The observed CPU big core frequency is double compared with the current
PLL setting. Therefore fix the wrong setting for PLL register
APMIXED_ARMPLL_BL.
Moreover, we also fix some wrong settings for other PLLs.
TEST=CPU frequency of big core CPU is correct and bootup correctly.
BUG=b:244215537
Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com>
Change-Id: I9126f439d7a5136b2fb8d66f103ef427a0b08a99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67543
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BUG=b:232573696
TEST=Able to verify audio playback on Google/Rex with this change.
Change-Id: Ia8dfc79e7e4d27828726145156c870733d716899
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66919
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes MeteorLake GPIO PINCTRL entries as per 5.15
kernel pintrl driver:
https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.15/drivers/pinctrl/intel/pinctrl-meteorlake.c
In order to support using ACPI GPIOs it is necessary for coreboot
to be compatible with this implementation. The GPIO groups that
are usable by the OS are declared with a pad base which is then
used to compute the number for ACPI GPIOs.
BUG=b:232573696
TEST=Tested on Google Rex board. After this change, driver rt5682s
is able to claim pinctrl IRQ 358 corresponding to GPP_B06.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Icabbe9e125ee9efaf0eef4c4cdc8be9f734aa703
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67565
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This message is not really an error message, so BIOS_ERR is
inappropriate. Since the message is informational, switch to
BIOS_INFO instead.
BUG=b:244687646
TEST=emerge-rex coreboot
before
[ERROR] USB Type-C 0 mapped to EC port 0
after
[INFO] USB Type-C 0 mapped to EC port 0
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ia08fd45dd484c79d81527ea46cfaaa5a01a410c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67536
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Adding support enables/disables TcssDma1En by usb4_params.
BUG=b:244687646
TEST= TcssDma1En is enabled as expected.
before patch
[SPEW ] PCI: 00:0d.2 [8086/0000] bus ops
[DEBUG] PCI: 00:0d.2 [8086/7ec2] enabled
[INFO ] PCI: Static device PCI: 00:0d.3 not found, disabling it.
after patch
[SPEW ] PCI: 00:0d.2 [8086/0000] bus ops
[DEBUG] PCI: 00:0d.2 [8086/7ec2] enabled
[SPEW ] PCI: 00:0d.3 [8086/0000] bus ops
[DEBUG] PCI: 00:0d.3 [8086/7ec3] enabled
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I9cd8fc3819f533e9581fea19d4da48283888cc04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67534
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Adding support enables/disables tbtPcie2/3 by usb4_params.
BUG=b:244687646
TEST= TRP2/3 are enabled as expected.
before patch
[INFO ] PCI: Static device PCI: 00:07.2 not found, disabling it.
[INFO ] PCI: Static device PCI: 00:07.3 not found, disabling it.
after patch
[DEBUG] PCI: 00:07.2 subordinate bus PCI Express
[DEBUG] PCI: 00:07.2 [8086/7ec6] enabled
[DEBUG] PCI: 00:07.3 subordinate bus PCI Express
[DEBUG] PCI: 00:07.3 [8086/7ec7] enabled
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ia1bdc9b5c0533bdddae67b8039103162a57fdc39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67530
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
BUG=b:245426120
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot
check SSDT table has MS0X entry
Scope (\_SB)
{
Method (MS0X, 1, Serialized)
{
If ((Arg0 == One)) {}
Else
{
}
}
}
Change-Id: Id01089531503e62231c5ab19e4cd8056198b9acb
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add the 'detect' flag to the Elan touchpad, so coreboot can determine
which touchpad type is present at runtime and generate the correct
ACPI entry for it (the Synaptics touchpad already has the flag).
Test: build/boot google/nami, verify touchpad works under Linux/Windows
Change-Id: I437d1d470552d55496dfe611f441331127c64250
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tidy up the layout to remove unnecessary sizes. This change also makes
the flash start at 0x0 and increases the size of the FMAP to 0x1000.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I46663003857eb50271c6ad1da6c4e56c8f4bb6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable S3 support as Prodrive doesn't need s0ix for now.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I7625c8ac860e1afc60c94b3c51e996531a1f2b15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67414
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The current HWIDs for ADL RVP are reported as invalid by Chrome on
ChromeOS; fix it by generating new valid HWIDs with the following
commands:
```
./util/chromeos/gen_test_hwid.sh ADLRVPM
./util/chromeos/gen_test_hwid.sh ADLRVPN
./util/chromeos/gen_test_hwid.sh ADLRVPP
```
BUG=b:243899466
Change-Id: Iad6f47e67c2d35363b042aabec8b3317d5bfc111
Signed-off-by: Victor Ding <victording@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67532
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of these changes are suggested by clang-format(13.0-54) tool on
Debian testing.
Change-Id: I68a288b3f7e911331e7324bf13cf9bde259a29de
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Most of these changes are suggested by clang-format(13.0-54) tool on
Debian testing.
Change-Id: I9bf5f516db4f12ffe1e9a714c7a8ae179c12b149
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Problem: OTA is triggering warmboot, where DDR is
in self-refresh mode. Due to which DDR training
is not going well.
Change: Verify reboot type in case of OTA. If it is warmboot, will
force for cold boot inorder to trigger DDR training
BUG=b:236990316
TEST=Validated on qualcomm sc7180 development board.
Test observation: Cold boot is triggered forcefully,
if current reboot is warmboot in case of OTA
Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com>
Change-Id: I908370662292d9f768d1ac89452775178e07fc78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67406
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Kconfig options for ASPM.
TEST=Verify ASPM is enabled with `lspci -vvv`, `suspend_stress_test -c
10` passed all 10 times
BUG=b:243771794
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I54071d9c9607da4561d745d152924d56904c0fee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Update ASPM configuration, disabling ASPM for the SSD due to s0i3
issues. Bug b:245550573 created to track the SSD issue.
TEST=Boot to OS and verify suspend via `suspend_stress_test -c 10`
BUG=b:243771794
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I45a290c8ceddd39f65c6fe1390e3a753cad99899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
