summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-21mb/google/zork/var/ezkinil: Fix stylus GPIO to enable suspendJosie Nordrum
Make GPIO_4 and GPIO_5 PAD_NC in ezkinil/gpio.c. None of the Ezkinil SKUs use internal stylus and hence pen pads are configured as NC. BUG=b:164892883, b:165342107 TEST=Verified taht pen detect GPIO does not cause spurious wakes. BRANCH=None Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I7557575cf8b8e0f849e05bda1d69acf61e91a157 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44629 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21superio/ite: delay PWRGD3 during resumeMichael Büchler
According to the IT8728F datasheet it is possible to add an extra delay between 3VSBSW# being set and PWRGD3 being set during resume from Suspend-to-RAM. This is enabled in the special function selection register, the default being 0. This is also useful for the IT8720F although this chip does not have the PWRGD3 output. On the corresponding pin it has PWROK2, which the setting then seems to apply to. The datasheet for the IT8720F marks the corresponding bit as reserved, but the vendor BIOS of an Acer Aspire M3800 sets it anyway. Without setting the bit, coreboot fails to resume from S3. Oscilloscope measurements have shown that setting the bit increases the delay between 3VSBSW# being set and PWROK2 being set from around 1 us to 140 ms. The actual use of PWROK2 on the board design is unclear - the only destination it seems to reach is a pin header near the SuperIO marked as "GPIO1". Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: I51cbf2470dc2b840a647a20090acb5a0cf4f4025 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-21lib: Update fmap cache error for psp_verstageMartin Roth
The assumption was that the fmap cache would be initialized in bootblock, otherwise an error is shown. This error is showing up in psp_verstage when the fmap cache is initialized there, so create a new ENV value for ENV_INITIAL_STAGE. BUG=None TEST=Boot, see that error message is gone from psp_verstage Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I142f2092ade7b4327780d423d121728bfbdab247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43488 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21soc/amd/picasso: If using VBOOT, skip the APOB_NV region for ROMartin Roth
When booting from the RO region of a VBOOT enabled ROM, there shouldn't be a reliance on anything outside of the RO section. This includes the APOB_NV region (similar to the MRC cache region). By skipping the region when setting up the BIOS Directory table, the PSP won't try to use the region when booting. The APOB_NV region is still used for the VBOOT RW sections. BUG=b:158363448 TEST=Build RO with no APOB_NV region. Dump the BDT and verify that it's not in RO, but is in RW_A & RW_B. Boot into recovery. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I13c35ba8a2331492744d2acf257db15e4a53102a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21util/amdfwtool: Refactor APOB_NV requirementsMartin Roth
amdfwtool currently assumes that we MUST have an apob_nv area if we have an aopb. This is not required, so if neither the apob_nv size or base are specified, just move on. BUG=b:158363448 TEST=Build an image with no APOB_NV region. Dump regions to show that it's not there. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibaeacd3dcdfd73f690df61c2a19d39bbb9dcc838 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44045 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21docs/purism/librem_mini: Fixup CPU model, markup linksMatt DeVillier
Change-Id: I26c0936c912490fc0ba28ee53139e3a1f3a00911 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-21mb/google/zork: provide full range backlight settings to kernelAaron Durbin
Utilize the SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF option to provide full range backlight settings to the kernel. BUG=b:163583825 Change-Id: I3c337fad38e668488800f4d6bc583a82a93659d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21soc/amd/common: add rudimentary ATIF supportAaron Durbin
The Linux kenerl driver for AMD gpu currently has a floor value of 12 for brightness settings (AMDGPU_DM_DEFAULT_MIN_BACKLIGHT). AMD indicates they did this because they were concerned with certain panels flickering at lower backlight values. However, for unaffected panels it's desirable to be able to have the panel "turn off" at the lowest backlight setting. The only way to do that is to provide ATIF bindings that indicate backlight range. Option SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF is added to provide a full range for the backlight setting. If needed, this path can be built upon for fuller support, but for the time being this is the only thing necessary to make the backlight be full range. BUG=b:163583825 Change-Id: If76801a8daf6a5e56ba7d118956f3ebce74e567a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21acpi: add more AML generation functionsAaron Durbin
Add the following functions to acpi AML generation code: acpigen_write_to_integer_from_namestring() acpigen_write_create_byte_field() acpigen_write_create_word_field() acpigen_write_create_dword_field() acpigen_write_create_qword_field() BUG=b:163583825 Change-Id: Ida151aff68f90012b16df2383fb96ddb87c3fb9c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44641 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21arch/x86/gdt: Work around assembler bugPatrick Rudolph
The GDT loading did work fine on x86_64 a few months ago, but today it only works in QEMU, but not on real hardware or KVM-enabled QEMU. This might be related to toolchain changes. Use 64bit GDT loading on x86_64 and force the assembler to generate a 64bit address load on the GDT. This will make sure no 32bit (signed) displacement op is being generated, which points to the wrong address in longmode. Verified using readelf and made sure no R_X86_64_32S relocation symbol is emitted. Disassembled the romstage ELF and made sure the GDT address is 64bit in size. Tested on QEMU and KVM-enabled QEMU: Doesn't crash any more on KVM. Signed-off-by: Patrick Rudolph <siro@das-labor.org> Change-Id: Ia824f90d9611e6e8db09bd62a05e6f990581f09a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-21include/asan.h: Add missing includesElyes HAOUAS
<stdint.h> and <stddef.h> are missing. Change-Id: I10520013bb5ceb3aec0d24715f371f77e4300a70 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2020-08-21mb/purism/librem_whl: Convert GPIOs to macrosMatt DeVillier
Convert raw GPIOs to coreboot macros using newly-added support for Cannon/Whiskey/Coffee/Cometlake SoCs to intelp2m Test: build/boot Librem Mini, no smoke released. Change-Id: I6ac747ad4e650c24d2b7e34228ff74140c51a0c1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-21mb/intel/tglrvp: Disable TBT_PCIE3 for UP4John Zhao
Tiger Lake External Design Specification (Document #575683) states UP4 TBT_PCIE3 is not applicable. Disable TC3 for UP4. BUG=None Test=Built UP4 image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Icff8fccf9ac29c315c2a4dd08a3ec8a8efe9c453 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44572 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21mb/google/dedede: Enable IPU for Wdoo and Wdee variantsMaulik V Vaghela
IPU is required to be enabled for platform supporting MIPI camera. IPU is by default disabled in devicetree for all variants. Enable IPU for Waddledoo and Waddledee supporting MIPI camera. BUG=None BRANCH=None TEST=IPU is enabled for platforms and enumerates in lspci. Change-Id: Ia3cf06d78be4301c68bfa8b1118ddff231d24a66 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44271 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21SMM: Validate more user-provided pointersPatrick Rudolph
Mitigate issues presented in "Digging Into The Core of Boot" found by "Yuriy Bulygin" and "Oleksandr Bazhaniuk" at RECON-MTL-2017. Validate user-provided pointers using the newly-added functions. This protects SMM from ring0 attacks. Change-Id: I8a347ccdd20816924bf1bceb3b24bf7b22309312 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-21sb/intel/i82371eb/fadt.c: Use macro for 'flags' instead of magic numberElyes HAOUAS
Change-Id: I793afe81fbb9abef0d4178af9dc2e91c612b1b43 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44521 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21soc/intel/tigerlake: Enable long cr50 ready pulsesJes Klinke
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, to have Cr50 generate longer than default interrupt pulses. This needs to be selected on all Tiger Lake systems, since Tiger Lake (and likely future Intel SoCs) require at least 100us interrupt pulses. TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: I20100d72ce426203943c1788d538bb2cd9d82e11 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21arch/x86: Add support for ASan to memory functionsHarshit Sharma
Compiler's instrumentation cannot insert asan memory checks in case of memory functions like memset, memcpy and memmove as they are written in assembly. So, we need to manually check the memory state before performing each of these operations to ensure that ASan is triggered in case of bad access. Change-Id: I2030437636c77aea7cccda8efe050df4b77c15c7 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21mainboard/emulation/qemu-i440fx: Select HAVE_ASAN_IN_ROMSTAGEHarshit Sharma
Enable ASan in romstage as it has been tested. Change-Id: I3b5263f5342a78968d9a1ecf72996fff0946b204 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21soc/intel/apollolake: Select HAVE_ASAN_IN_ROMSTAGEHarshit Sharma
Enable ASan in romstage for apollolake as it has been tested on Siemens MC-APL3. Change-Id: I2f2f965151a4ef4672f2f16979a6ad8492879aeb Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21cpu/intel/haswell: Select HAVE_ASAN_IN_ROMSTAGEHarshit Sharma
Enable ASan in romstage for haswell as it has been tested on Lenovo ThinkPad T440P. Change-Id: I6eae242c71f41c9159658ae68d61b4036ad42d42 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21arch/x86: Select HAVE_ASAN_IN_RAMSTAGEHarshit Sharma
Enable ASan in ramstage if ASAN is selected in menuconfig for an x86 platform. Change-Id: Id5b3dc18368a5da6bdc70c84527b95d1688dc19f Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44259 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21Kconfig: Update ASan config optionsHarshit Sharma
Instead of enabling ASAN_IN_ROMSTAGE from Kconfig file in a platform's dedicated directory, let's introduce a new config option HAVE_ASAN_IN_ROMSTAGE to denote if a given platform supports ASan in romstage. Similary, use HAVE_ASAN_IN_RAMSTAGE to indicate if a given platform supports ASan in ramstage. Consequently, we no longer have to make ASan x86 specific. Change-Id: I36b144305465052718f245cacf61d3ca44dfb4b4 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21lib: Add ASan support to romstage on x86 archHarshit Sharma
This patch adds ASan support to romstage on x86 architecture. A Kconfig option is added to enable ASan in romstage. Compiler flags are updated. A memory space representing the shadow region is reserved in linker section. And a function call to asan_init() is added to initialize shadow region when romstage loads. Change-Id: I67ebfb5e8d602e865b1f5c874860861ae4e54381 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21lib: Add ASan support to ramstage on x86 archHarshit Sharma
This patch adds address sanitizer module to the library and reserves a linker section representing the shadow region for ramstage. Also, it adds an instruction to initialize shadow region on x86 architecture when ramstage is loaded. Change-Id: Ica06bd2be78fcfc79fa888721ed920d4e8248f3b Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21lib: Update ASan compiler flags and Kconfig help textHarshit Sharma
An additional compiler flag is added to make use of the shadow offset callback feature we introduced in our GCC patch. Also, a comment is added to tell user that this GCC patch needs to be applied in order to use ASan. Change-Id: Ia187e4991bf808f4ae137eff0ffdb9baea0085e9 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21lib: Add ASan stubHarshit Sharma
Add a Kconfig option to enable address sanitizer on x86 architecture. Create ASan dummy functions. And add relevant gcc flags to compile ramstage with ASan. Change-Id: I6d87e48b6786f02dd46ea74e702f294082fd8891 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-21mb/google/asurada: Fixup BOOT_DEVICE_SPI_FLASH_BUS default valueCK Hu
On MT8192 the SPI flash is actually using a SPI-NOR controller with its own bus. The number here should be a virtual value as (SPI_BUS_NUMBER + 1). Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Ibc269201a34968c8400d2235e8da2ecd88114975 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-20cse_lite: Move global reset after MRC writebackCaveh Jalali
With CSE-lite enabled, we were going through the lengthy memory training procedure twice on the first power-on boot or after full BIOS SPI flash update. This moves the global reset performed to achieve the CSE-lite RO to RW reboot to a later boot phase so that it happens after the memory training data has been written to the MRC cache. Now, the 2nd (and subsequent) reboot can utilize the memory training data established during the 1st boot. This reduces the first boot time by about 20s on a 16GB system. Looking at the timing stats form cbmem, the normal boot penalty is about 300ms - mostly attributed to running FspSiliconInit a 2nd time. We will get this time back when the mrc_cache refactoring effort lands (cb:44196, et. al). BUG=b:162021048 TEST=Booted on volteer, confirmed 20s faster boot time. Change-Id: Ia42d72fdec41f9792ab8f04205b20a55758a4235 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-203rdparty/vboot: Update to latest masterPatrick Georgi
This also includes https://chromium-review.googlesource.com/2318026 which fixes an issue with duplicate symbols. Change-Id: Icf450616b3bcd8b7c01261c913cd172625dbd6ba Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-20soc/amd/acpi: Move ACPI IVRS generation to corebootJason Glenesk
Add code for IVRS generation to coreboot. Publish coreboot generated structure rather than IVRS generated by FSP binary. Reference Doc: 48882_IOMMU_3.05_PUB.pdf BUG=b:155307433 TEST=Boot trembyle to shell and extract and compare IVRS tables and make sure they cover the same devices. Change-Id: I693f4399766c71c3ad53539634c65ba59afd0fe1 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-20drivers/spi/tpm: Enable long cr50 ready pulses for Tiger Lake systemsJes Klinke
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4 only if we know that the Cr50 is generating 100us interrupt pulses. We have to do so, because the SoC is not guaranteed to detect pulses shorter than 100us in S0i3.4 substate. A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, provided that Cr50 firmware is new enough to support the register. BUG=b:154333137 TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Change-Id: If83188fd09fe69c2cda4ce1a8bf5b2efe1ca86da Reviewed-on: https://review.coreboot.org/c/coreboot/+/43741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-20src/mainboard: Escape variable expansion in KconfigPatrick Georgi
Kconfig 5.8 interprets $(...) itself using environment variables, which generally means that they expand to the empty string. \$(...) works with both our current and new Kconfig with the desired behavior (to pass it through unmodified). Change-Id: I726567eeb61d2035560152677d2b4548c1472be9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44584 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-20mb/asrock/b85m_pro4: Select PECI function on Super I/OAngel Pons
This allows the Super I/O to know how hot the CPU is. Change-Id: I9c91136c3bb5aae541bb7ac64bb62be36c3c0b5d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-20sb/intel/lynxpoint: Drop unneeded and rotten Kconfig optionAngel Pons
Not selecting `ME_MBP_CLEAR_LATE` results in a build failure. Since both traditional and ULT platforms are known to be working, drop the option. Change-Id: I09ce27f812966800e36f6c0624c93759089faf45 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-20mb/asus/am1i-a/buildOpts.c: choose the 1600 MT/s RAM frequencyMike Banon
Together with the "AMD_XMP" changes, now this board with Crucial BLT8G3D1869DT1TX0 sticks could run at 1600 MT/s CL8 (8-8-9-23) speeds. Earlier only 1333 MT/s CL9 (9-9-10-27) has been possible with coreboot. 1866 MT/s CL9 is impossible on f16kb without northbridge overclocking. tRP in "CL-tRCD-tRP-tRAS" gets set 1 point higher by AGESA because of Errata 638. See more info in a BKDG for AMD Family 16h Models 00h-0Fh. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I7e9f5120421221043f9f9dfe143b51bfa61936be Reviewed-on: https://review.coreboot.org/c/coreboot/+/44462 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-20vc/amd/agesa/f16kb: raise the UDIMM Freq limit 1333MT/s values to 1600MT/sMike Banon
AMD f16kb boards are perfectly capable of working at 1600MT/s RAM speeds even with two DDR3 UDIMM modules per channel. AM1I-A only supports a single-channel operation, with at most two DIMMs per channel, so raising these limit values is required to let it and similar boards run faster. Successfully tested on AM1I-A and two Crucial BLT8G3D1869DT1TX0 UDIMMs, together with related AMD_XMP changes - also required to get a 1600MT/s with this set of modules which have only 1333MT/s at JEDEC part of SPD. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I2a9da4e594ab3dc38b5ba87520633cbd01c9ce01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44461 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-20soc/intel/xeon_sp/cpx/Kconfig: Relocate 'select CACHE_MRC_SETTINGS'Elyes HAOUAS
This will remove the warning: "src/soc/intel/xeon_sp/cpx/Kconfig:79:warning: config symbol 'CPU_BCLK_MHZ' uses select, but is not boolean or tristate" Change-Id: I2cfaf347b638e3847caa167e7efda89e9202960a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-08-19mb/google/zork/baseboard: Remove unused referenceMatt Papageorge
Remove references to clk_pm_support which is currently ignored by Picasso AGESA FSP. BUG=b:161218965,b:162423378 TEST=Build test Trembyle and Dali, boot to ChromeOS 5 times each Change-Id: Ic5d6abc56821863b68e45c11763f00d2b6410983 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44556 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19vc/amd/fsp/picasso: update pci descriptor commentsMatt Papageorge
Update fsp_dxio_descriptor comments to be more comprehensive of the currently available data fields. Most of these are not currently utilized with Zork but may be in future projects. BUG=b:161218965 TEST=Build test Trembyle Change-Id: I8eb79fa7807dcf5b28b7b0ec60953ef857d51972 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19util/abuild: Avoid another git submodule invocationPatrick Georgi
.xcompile is generated before the submodules handling, but there's no need for the submodules to be around, so skip here, too. Change-Id: I60205f65b124a09067de5ae50f066b5cf64733f2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-08-19mb/google/volteer: Implement weak function `cse_board_reset`Tim Wawrzynczak
Since Volteer also uses the CSE Lite SKU and the cr50, it is subject to a problem where old cr50 FW will not be able to properly detect an SoC reset, so the reset on cold boots caused by the CSE Lite RO->RW jump should instead get an assist from the EC, which can perform a full cold reset. BUG=b:162977697 TEST=Verify EC performs the cold reset Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie8ae21c203da218459d5fd30a23be23520ed0598 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-19configs: Build test experimental x86_64 codePatrick Rudolph
Add additional build config to test qemu-i440fx x86_64 code. Change-Id: I63f7a6e1602728e4d5ff67f9bd702efebe315c16 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-19mb/emulation/qemu-q35,qemu-i440fx: Add x86_64 supportPatrick Rudolph
* Enable optional x86_64 romstage, postcar and ramstage * Add Kconfig for x86_64 compilation * Add documentation for x86 qemu mainboards * Increase CAR stack as x86_64 uses more than 0x4000 bytes Working: * Boots to Linux * Boots to SeaBIOS * Drops to protected mode at end of ramstage * Enumerates PCI devices * Relocateable ramstage * SMM Change-Id: If2f02a95b2f91ab51043d4e81054354f4a6eb5d5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29667 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19cpu/x86/64bit/exit32: Add support for ramstagePatrick Rudolph
When compiled in RAMSTAGE use the segments for ramstage. Allows to call this assembly code in ramstage to exit long mode. The next commit makes use of this. Tested on qemu: Still boots on x86_64. Change-Id: I8beb31866bd15afc206b480b1ba05df995adc402 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-08-19arch/x86/boot: Jump to payload in protected modePatrick Rudolph
* On ARCH_RAMSTAGE_X86_64 jump to the payload in protected mode. * Add a helper function to jump to arbitrary code in protected mode, similar to the real mode call handler. * Doesn't affect existing x86_32 code. * Add a macro to cast pointer to uint32_t that dies if it would overflow on conversion Tested on QEMU Q35 using SeaBIOS as payload. Tested on Lenovo T410 with additional x86_64 patches. Change-Id: I6552ac30f1b6205e08e16d251328e01ce3fbfd14 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-19cpu/ti/am335x: Move from cpu to soc in treeSam Lewis
The AM335X is a SoC, so should be in the soc tree. This moves all the existing am335x code to soc/ and updates any references. It also adds a soc.c file as required for the ramstage. Change-Id: Ic1ccb0e9b9c24a8b211b723b5f4cc26cdd0eaaab Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-19arch/arm: Enable FIT payloadsSam Lewis
Implements fit_payload_arch for the arm (aarch32) architecture, so that FIT images can be used. The implementation is very similar to the existing implementations for arm64 and riscv, and has mostly been lifted from these other ports. TEST: Booted Beaglebone Black (in progress port, to be submitted soon!) with a FIT image containing a 5.4 kernel, dtb and initramfs. Change-Id: I6b50c6f06b83c00a5b3622b5bbafe67130b6d233 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-19mb/google/volteer: Update settings for trackpad on HalvorJohn Su
Configure gpio settings for trackpad. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I525ba688f71b7a1893bcb64c77e02c8e2506d7b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44524 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: log and print GPIO wake eventsAaron Durbin
Capture the GPIO subsystem wake state and add events to the eventlog. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7f10bf4599ea7928cc87b6b10ac11a7c30e58406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-19soc/amd/common: add gpio subsystem event reportingAaron Durbin
In order to log gpio events for wake purposes the state of the gpio subsystem should be snapshotted. Add the ability to capture state of gpio subystem as well as saving up to 16 gpios that indicate their wake status. Likewise, provide the eventlog additions based on state. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I49fca56c87543aa8aad0eb7da5c5cb570c4349d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44534 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: Use cbfs to locate the AMD firmwareMartin Roth
Switch from locating the AMD firmware in the RW_A & RW_B regions with their hardcoded locations to using CBFS to find them. They still need to be at the hardcoded locations so that we can set the location inside the binary, but instead of just setting the pointer directly to them, we now search for them with cbfs. BUG=b:154441227 TEST=Boot & verify that binaries are located in both RW-A & RW-B Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I27b0593e0db7a9e6ba9b0633ac93b4d93954f002 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42831 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: Remove now unused #defineMartin Roth
This #define wasn't removed when the tests were removed, so get rid of it now. BUG=None TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ie0005b6ee97037bf3dfb80f0c2408d8bd9ee9633 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-19mb/google/zork: remove unused asl files for dirinbozKevin Chiu
BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: I713ac3a47c2d47035affb32e6c604b9af23aa90e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-19mb/google/zork: Adjust Dirinboz I2C valuesKevin Chiu
BUG=b:164757545 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully 3. measure i2c freq by scope is close to 400kHz Change-Id: Icb27ff8a4960caaebc542ee4e507f1611da5a77e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18mb/amd/mandolin: enable SoC UARTs 0 and 1 and disable 2 and 3Felix Held
There are only headers for the SoC's UART 0 and 1 on the board. BUG=b:165020060 TEST=Linux only detects UART 0 and 1. Change-Id: I45929f65a5f844ae5cef792b11176f487c80766f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44530 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/amd/mandolin: select ACPI driver for internal memory mapped UARTsFelix Held
In order for Linux to find and use the SoC's integrated UARTs, they need to be exposed in ACPI. BUG=b:165020060 TEST=Linux detects the SoC's integrated UARTs. Change-Id: Iaa66657b88f62b2067c865c3e1945b7bdbf9be23 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/amd/mandolin: use SoC UART for console if LPC UART isn't presentFelix Held
Using the SOC's UART 0 as console requires moving a few resistors on the Mandolin board. BUG=b:165020060 TEST=coreboot console works on SoC UART 0 when AMD_LPC_DEBUG_CARD isn't selected. Change-Id: Idaf73ae84f54028da2182ce42035f9ecd63f4776 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/google/zork: Clean up bt reset_gpio removalRob Barnes
Clean up of bt reset_gpio removal function. TEST=Boot and observe log showing bt reset_gpio was removed BUG=b:157580724 - Add reset_gpio for Bluetooth Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1d40ad16dd3c624d4be89d9eea1835cc4e72c03d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44273 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18documentation: Add documentation for Purism Librem MiniMatt DeVillier
Change-Id: Ie5699942f48d2d5b1417f447a9a36b98e4b18156 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42882 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18soc/amd/picasso: fix GPE snapshot stateAaron Durbin
In CB:44488 the cbmem addition was re-filling the object when it should be memcpy()ing from static object. Correct that oversight. The side effect from the previous implementation would be if FSP-M modified the GPE state. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I158a89ae28431896fa9b5789292000fcbf0b066d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: add ELOG_WAKE_SOURCE_GPIOAaron Durbin
Provide a GPIO-based wake source event for log caputre. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Iaa15178a392f40156d8d10e9aedfd5a1e758eedb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44532 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/google/volteer: Configure DP_HPD as PAD_NC and disable DdiPortHpdJohn Zhao
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. DP_HPD had been removed for EVT design as those events are through eSPI. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:162566436 TEST=Booted to kernel and verified no kernel HPD pins assertion message on Volteer EVT board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia3245741b776b75073d2b43d36c8ea40b476b3ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/44501 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: rename ELOG_WAKE_SOURCE_GPIO to ELOG_WAKE_SOURCE_GPEAaron Durbin
The wake source macro for GPE events was using 'GPIO'. However, current usage is really all GPEs. Therefore, provide clarity in the naming in order to allow for proper GPIO wake events that are separate from the ACPI GPE block. BUG=b:159947207 Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18mb/google/dedede: Fix S3 wake using trackpadMeera Ravindranath
Configure TRACKPAD_INT_ODL pad reset config to DEEP and map PMC_GPE_DW to PMC_GPP values. TEST=System should wake from S3 via trackpad Change-Id: I58ce3720e0fdeefb2c9440bb3006897ef80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-18soc/intel/jasperlake: Fix PMC_GPE_DW mappingMeera Ravindranath
PMC_GPE_DW mapping was not configured correctly and hence coreboot skipped programming Tier 1 GPIOs resulting in failure of S3 wake from Trackpad. TEST=System should wake from S3 via trackpad Change-Id: I59ce3720e0ffeefb2c9440bb300689def80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-18soc/intel/jasperlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBMeera Ravindranath
Increase the cbmem console size from 3KB to 5KB in order to fix console overflow. Change-Id: Id7eb64feb91ec29df5402b2fb1bac3ff73cc5bb3 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44326 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18crossgcc: Upgrade LLVM to version 10.0.1Elyes HAOUAS
Change-Id: I1d96654fd66a5972c6c5cc24311ca2d889866331 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39921 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Ic09fc4ff4ee5524d89366e28d1d22900dd0c5b4d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unuse '<timestamp.h>Elyes HAOUAS
Change-Id: I4fa03c4576bb0256b73f1d36ca840e120b750a74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<halt.h>'Elyes HAOUAS
Change-Id: I3037edf89c933f4f136ca61d6a5bce41126ec6b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<option.h>'Elyes HAOUAS
Change-Id: Icb79d60e9ec70a0780d5231698b88cff1db72c9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18soc/intel/common/block/pmc/pmclib.c: Remove unused '<pc80/mc146818rtc.h>'Elyes HAOUAS
Change-Id: If7e99e1b1be38694ad2fedb528a5c1725b968943 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44096 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18sb/amd/agesa/hudson: Add missing '#include <stddef.h>'Elyes HAOUAS
size_t needs <stddef.h>. Change-Id: I9ccf526df44dbad8568f75bd0506ac686fdb7860 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43939 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <stddef.h>Elyes HAOUAS
Change-Id: Iae1e875b466f8a195653d897efa1b297c61ad0a5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41912 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <boot_device.h>'Elyes HAOUAS
Change-Id: I5589fdeade7f69995adf1c983ced13773472be74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42349 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18sb/intel/lynxpoint/early_pch.c: Use common 'write_pmbase16()'Elyes HAOUAS
Change-Id: I1a70eea8c4f835e5673e75282c9cecb24b150e3d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src/southbridge/amd/*/*/fadt.c: Use macro for access_sizeElyes HAOUAS
Change-Id: I316abf6626adabeecdf9639712ab3bf64e3cbe83 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18cpu/intel/common: Use macro for access_sizeElyes HAOUAS
Change-Id: I0388ac41403ff03943c91ba19f6527e7d77e0139 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src/acpi/acpigen.c: Use macro for access_sizeElyes HAOUAS
Change-Id: I677d055b3cd47f760d743a6ecb63cb5738274090 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18sb/intel/{i82371eb,i82801dx}/fadt.c: Use macro for iapc_boot_archElyes HAOUAS
Change-Id: Ie5e44be06da8a84c9cff42e07af1a7387faad533 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unneded whitespace before tabElyes HAOUAS
Also remove unneded tab in 'picasso/Makefile.c' file. Change-Id: Id25b2d308645c449c205b3a946f89b6b6de62a47 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18crossgcc: Upgrade CMake to version 3.18.1Elyes HAOUAS
Release Notes: https://cmake.org/cmake/help/v3.18/release/3.18.html Change-Id: I20b75b7c29be838c3c168547bcab25ea5c1af462 Signed-off-by: Griffin98 <griffin98@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18payloads/nvramcui: Fix `make clean`Nico Huber
After `make clean` a new build should not be based on stale artifacts. Hence we have to remove them. Change-Id: I540a83a6c87b843b1c4c9c55990bf3e91fe90d79 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18payloads/coreinfo: Fix `make clean`Nico Huber
After `make clean` a new build should not be based on stale artifacts. Hence we have to remove them. Change-Id: I18292c674986078d991668124193b6aa31234d47 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18xeon_sp/cpx: Fix get_system_memory_map to return the correct addressJohnny Lin
Similar to commit b45ed65, the HOB structure is actually a 8 byte address pointing to the HOB data. Tested=Verified the values of the hob fields are the same printed by soc_display_memmap_hob(). Change-Id: I348d3cd80a56e86d22f20fcadf0316b462b86829 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18cpu/x86/smm/smm_stub: Add x86_64 supportPatrick Rudolph
Enable long mode in SMM handler. x86_32 isn't affected by this change. * Enter long mode * Add 64bit entry to GDT * Use x86_64 SysV ABI calling conventions for C code entry * Change smm_module_params' cpu to size_t as 'push' is native integer * Drop to protected mode after c handler NOTE: This commit does NOT introduce a new security model. It uses the same page tables as the remaining firmware does. This can be a security risk if someone is able to manipulate the page tables stored in ROM at runtime. USE FOR TESTING ONLY! Tested on Lenovo T410 with additional x86_64 patches. Change-Id: I26300492e4be62ddd5d80525022c758a019d63a1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
2020-08-18util/intelp2m: Add support for Cannonlake-LP SoCsMatt DeVillier
Add support for Cannonlake-LP SoCs (Whiskeylake-U, Coffeelake-U, Cometlake-U) as a separate parsing profile, copying the existing 'Sunrise' profile and adjusting for differences in reset mapping and GPIO macro generation Test: convert inteltool GPIO log dump into coreboot macros for an out-of-tree CML-U board. Change-Id: I86296697ee892af7aa0818fb608b6d68fad2f307 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-18mb/purism/librem_whl: Add new board Librem Mini (WHL-U)Matt DeVillier
Add new librem_whl baseboard and Librem Mini variant. Tested with SeaBIOS, Tianocore, and Heads payloads. All functions working normally except SATA, which is limited via a FSP UPD to 3Gbps until the correct HSIO PHY settings can be determined. https://puri.sm/products/librem-mini/ Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I36af42766f85eb17f86f6ec9b48b87125fb911e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18xeon_sp/cpx: Enable ACPI P-state supportJingle Hsu
Implement ACPI P-state support to enable driver acpi_cpufreq. This patch leverages code from the Skylake project. Tested=On OCP Delta Lake cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 1501000 1500000 1400000 1300000 1200000 1100000 1000000 900000 800000 Change-Id: I3bf3ad7f82fbf196a2134a8138b10176fc8be2cc Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18soc/intel/jasperlake: Configure IPU based on devicetreeMaulik V Vaghela
FSP enables IPU (Imaging Processing Unit) by default even if its disabled in devicetree. We need to fill FSP upd based on the device enablement in devicetree. BUG=None BRANCH=None TEST=IPU is disabled and doesn't show in lspci. Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-18mb/prodrive/hermes: Enable LPSS ACPI driverPatrick Rudolph
Enable the introduced LPSS ACPI uart driver. Tested on Hermes using Linux 5.6: The UART2 appears as /dev/ttyS2. Change-Id: Ic15be4a807012216e52c848120de7e39522f57b7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18soc/intel/common: Add support for LPSS UART in ACPI modePatrick Rudolph
Emit ACPI code for LPSS UARTs operating in ACPI mode. In this mode the device vendor ID reads as 0xffff, the PCI devices is still operate. Add ACPI device IDs for APL, GLK, SPT, SPT_H and CNP_H. The mainboard's devicetree needs to be adapted to include the chip driver and the PCI ID when it wouldn't have been hidden. Example: chip soc/intel/common/block/uart device pci 19.2 hidden register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2" end # UART #2 end Tested on Linux 5.6 with Sunrise Point ACPI ID for UART2. Tested on Windows for all other UARTs. Change-Id: I838d16322be38f5421c1f63b457a0af552e0ed96 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40405 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/amd/common: add GPE event logsAaron Durbin
GPE events were not be recorded in the eventlog. Add those to the eventlog when the status register indicates those events. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ifb3167fd24f2171b2baf1a65eb81a318eb3e7a86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: snapshot chipset state early in boot sequenceAaron Durbin
Previously the chipset state was snapshotted very late in the boot (ramstage). Instead start gathering the state early in romstage prior to calling any FSP routines so there's a clean snapshot. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id41686e6cdf5bebc9633b514b4121b0447f9be2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/stoneyridge: remove unused soc_power_reg objectAaron Durbin
Now that no one is consuming this object, remove its definition. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ib5aeec1733b6c9fa49569e30c4c369f70af0939c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: remove unused soc_power_reg objectAaron Durbin
Now that no one is consuming this object, remove its definition. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I60e4a9bfdf2752923f46a35aaab7034f9fa9b309 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: removed unused functionsAaron Durbin
Now that all users of the functions manipulating global state and using soc-specific objects are removed remove those functions. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I18c4c8b0c7852dde8cf0b6b3f11e43e15c3ce155 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: use new ACPI helper functions from commonAaron Durbin
Transition the current call sequence to using the newly added common ACPI helper functions. Semantically, the expectations are that this sequence is the equivalent of previous acpi_clear_pm1_status(). However, in subsequent patches picasso will be snapshotting state way sooner than ramstage. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I34e2ba7c5cd123b98c39291537e74175ec043e85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 18:56:01 +0000