summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-26mb/google/brya: Deduplicate chipset lockdown configFelix Singer
Due to an issue in sconfig, move `chipset_lockdown` out of `common_soc_config` and configure it separately in the baseboard's devicetree since it might get overwritten if a variant configures `common_soc_config`. Also, deduplicate the configuration of `chipset_lockdown`. Change-Id: Id969346df06aa82ab2ad2b1aa4884a9bcd876d75 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56408 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/intel/coffeelake_rvp: Use CHIPSET_LOCKDOWN_COREBOOTFelix Singer
Currently, internal flashing is not possible due to FSP lockdown. Thus let coreboot do chipset lockdown on all variants. Change-Id: Ib25a0543bfee0889dce071f3b01725daabd0a0eb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56407 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26tests: Add lib/libgcc-test test caseJakub Czapiga
Add tests for src/lib/libgcc.c __clzsi2() implementation. Unlike GCC implementation, coreboot one can handle zero input. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I3f46071d0921e8c5edc5df3c296d11c77de01c88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-26arch/x86,lib/thread: Enable thread support in romstageRaul E Rangel
This change does the following: * Pushes the cpu_info struct into the top of the stack (just like c_start.S). This is required so the cpu_info function works correctly. * Adds the thread.c to the romstage build. I only enabled this for romstage since I haven't done any tests in other stages, but in theory it should work for other stages. BUG=b:179699789 TEST=Boot guybrush with threads enabled in romstage Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8e32e1c54dea0d0c85dd6d6753147099aa54b9b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-26arch/x86,cpu/x86/mp_init: Switch cpu_info index type to size_tRaul E Rangel
The alignment for `struct cpu_info` is wrong on x86_64. c_start.S uses the `push` instruction when setting up the cpu_info struct. This instruction will push 8 bytes but `unsigned int` is 4 bytes. By making it a `size_t` we get the correct size for both x86_32 and x86_64. BUG=b:179699789 TEST=Boot guybrush to the OS Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8ef311aaa8333ccf8a5b3f1f0e852bb26777671c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-26arch/{arm,ppc64,riscv}: Remove cpu_infoRaul E Rangel
The structure and function are not currently used or implemented. x86 is the only arch that currently implements it. It is currently used for COOP_MULTITASKING and mp_init. Keeping around the unused definitions leads to confusion. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0775ef03168f7f9c41b1b05cb8f12724d0458ba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-26lib/thread,lib/hardwaremain: Lazy initialize threadsRaul E Rangel
By lazy initializing the threads, if a stage doesn't use them, they will be garbage collected. BUG=b:179699789 TEST=Boot guybrush to the OS and verify threads worked Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7208ffb5dcda63d916bc6cfdea28d92a62435da6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56532 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26lib/thread,arch/x86: Move thread stacks into C bssRaul E Rangel
There is no reason this needs to be done in asm. It also allows different stages to use threads. If threads are no used in a specific stage, the compiler will garbage collect the space. BUG=b:179699789 TEST=Boot guybrush to the OS Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib5a84a62fdc75db8ef0358ae16ff69c20cbafd5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/56531 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26vboot/secdata_tpm: Add WRITE_STCLEAR attr to RW ARB spacesAseda Aboagye
It can be nice to update the TPM firmware without having to clear the TPM owner. However, in order to do so would require platformHierarchy to be enabled which would leave the kernel antirollback space a bit vulnerable. To protect the kernel antirollback space from being written to by the OS, we can use the WriteLock command. In order to do so we need to add the WRITE_STCLEAR TPM attribute. This commit adds the WRITE_STCLEAR TPM attribute to the rw antirollback spaces. This includes the kernel antirollback space along with the MRC space. When an STCLEAR attribute is set, this indicates that the TPM object will need to be reloaded after any TPM Startup (CLEAR). BUG=b:186029006 BRANCH=None TEST=Build and flash a chromebook with no kernel antirollback space set up, boot to Chrome OS, run `tpm_manager_client get_space_info --index=0x1007` and verify that the WRITE_STCLEAR attribute is present. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: I3181b4c18acd908e924ad858b677e891312423fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/56358 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/dedede: Program VCCIO selection for EN_SPKR GPIOKarthikeyan Ramasubramanian
Realtek speaker amplifiers under auto mode operation have Absolute Max Rating (AMR) at 1.98 V. Hence probe the firmware config for speaker amplifier and program the VCCIOSEL accordingly. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: Ifa0b272c23bc70d9b0b23f9cc9222d875cd24921 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-26soc/intel/jasperlake: Enable support to program VCCIO selectionKarthikeyan Ramasubramanian
Jasperlake is one of the few SoCs that support programmable VCCIO selection and this support is used by Dedede mainboard. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: I54def27a499ccba7fd25cab1048fdca06dbc535f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56536 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/common/block/gpio: Add support to program VCCIO selectionKarthikeyan Ramasubramanian
Some of the Intel SoCs with more than 2 PAD configuration registers support programming VCCIO selection. Add a pad configuration macro to program VCCIO selection when the GPIO is an output pin. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: Icda33b3cc84f42ab87ca174b1fe12a5fa2184061 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56507 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/dedede/var/pirika: Add USB2 PHY parametersAlex1 Kao
This change adds fine-tuned USB2 PHY parameters for pirika. BUG=192601233 TEST=Built and verified USB2 eye diagram test result Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Change-Id: Icf9fb41cd0ae40728e4ec5bd72a15ec3c45c963b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26soc/nvidia/tegra124: Increase bootblock sizeArthur Heymans
Verstage even fits in 44K so one can comfortably increase the bootblock size. This is need for the followup patches that turn console methods into drivers, which increase the bootblock a little, but still too much for the the bootblock to fit in the alloted size on this platform. Change-Id: If1eaf2b495e3032d156433fd0728134a66f4e49b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56521 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/dedede/var/cappy2: Generate SPD ID for supported memory partsSunwei Li
Add supported memory 'K4U6E3S4AA-MGCR' for cappy2 BUG=None TEST=Build the cappy2 board. Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ie76a4dca607bb2c3261bbe5478209a43e8430591 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26mb/asus/p5ql-em: Add default value for `gfx_uma_size`Angel Pons
Taken from Asus P5QPL-AM. Change-Id: If26e98eba5d762d99991bfc06cad1b84e1f430e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56562 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Set xHCI LFPS period sampling off timeBen Kao
Provide an option to set xHCI LFPS period sampling off time (SS_U3_LFPS_PRDC_SAMPLING_OFFTIME_CTRL in JSL EDS revision 2.0). If the option is set in the devicetree, the bits[7:4] in xHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated. The host will sample LFPS for U3 wake-up detection when suspended, but it doesn't sample LFPS at all time due to power management, the default xHCI LFPS period sampling off time is 9ms. If the xHCI LFPS period sampling off time is not 0ms, the host may miss the device-initiated U3 wake-up and causes some kind of race condition for U3 wake-up between the host and the device. BUG=b:187801363, b:191426542 TEST=build coreboot with xhci_lfps_sampling_offtime_ms and flash the image to the device. Run following command to check the bits[7:4]: iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Ben Kao <ben.kao@intel.com> Change-Id: I0e13b7f51771dc185a105c5a84a8e377ee4d7d73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26mb/google/brya: move the common config to the baseboardZhuohao Lee
This patch moves the common config to the Kconfig under BOARD_GOOGLE_BASEBOARD_BRYA and removes the redundant config. BUG=b:191472401 BRANCH=None TEST=build pass Change-Id: Ie59299dfaba6bb23758d4a4c22a6dbbb4ba6520e Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56387 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/google/brya: Enable BT offload conditionallySugnan Prabhu S
Currently, BT offload is disabled/enabled unconditionally based on the devicetree settings. BT offload uses I2S lines and cannot be enabled when a I2S based audio daughter card is active. So we need to enable BT offload only while using soundwire based audio daugther card. BUG=b:175701262 TEST=Verified BT offload on brya with soundwire audio daughter card BT offload enabled Change-Id: I6a9ad463e13e2cfcfc3b7de5a61a25cdef0641f7 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-26soc/amd/common/block/pm: Add support for Modern Standby event loggingKarthikeyan Ramasubramanian
Log the GPE and PM1 wake events into the event log using the SMI handler platform callback. BUG=b:186792595, b:186800045 TEST=Build and boot to OS in Guybrush. Ensure that the wake sources are logged into the event logs. 5 | 2021-07-15 16:26:43 | S0ix Enter 6 | 2021-07-15 16:26:49 | S0ix Exit 7 | 2021-07-15 16:26:49 | Wake Source | GPE # | 22 <- Trackpad 8 | 2021-07-15 16:27:07 | S0ix Enter 9 | 2021-07-15 16:27:13 | S0ix Exit 10 | 2021-07-15 16:27:13 | Wake Source | RTC Alarm | 0 25 | 2021-07-15 16:38:13 | S0ix Enter 26 | 2021-07-15 16:38:17 | S0ix Exit 27 | 2021-07-15 16:38:17 | Wake Source | GPE # | 5 <- Fingerprint Change-Id: Icec6fc03f4871cc46b32886575a7054bc289f4bf Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-26soc/amd/common/block/acpi: Extract event logging helpersKarthikeyan Ramasubramanian
Move the event logging helpers defined in acpi into a separate library. This will allow logging power management and GPE events for both S3 and Modern Standby. Introduce a single helper acpi_log_events function to log both PM and GPE events. BUG=None TEST=Build and boot to OS in Guybrush. Change-Id: I96df66edfc824eb3db108098a560d33d758f55ba Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-07-26lib/thread: Add asserts around stack size and alignmentRaul E Rangel
`cpu_info()` requires that stacks be STACK_SIZE aligned and a power of 2. BUG=b:179699789 TEST=Boot guybrush to the OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I615623f05bfbe2861dcefe5cae66899aec306ba2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-26lib/thread: Guard thread_run_until with ENV_RAMSTAGERaul E Rangel
thread_run_until is a ramstage specific API. This change guards the API by checking ENV_RAMSTAGE. BUG=b:179699789 TEST=Boot guybrush to the OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4784942070fd352a48c349f3b65f5a299abf2800 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56529 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-25mb/razer/blade_stealth_kbl/Kconfig: Fix up indentationAngel Pons
Change-Id: I0ffae7408f11f4f517204a0a670845c11b3601a8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56549 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-25sc7280: Increased CBFS_MCACHE sizeRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I16c41031718e1c3e41d0a128c8b254e2f6f94093 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-25soc/amd/common/block/cpu/mca/mcax: add comment about McaXEnable bitFelix Held
TEST=Checked on amd/mandolin with PCO APU and google/guybrush with CZN APU that the McaXEnable bit is set in the CONFIG registers of all used MCAX banks. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia4515ba529e758f910d1d135cdce819f83ea0b5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-24soc/amd/*/chip.h: Correct PSPP Enum ValueMatt Papageorge
It appears the pspp_policy enum is not the same as the FSP definition currently being used. This means that the incorrect PSPP value setting would get read by FSP. For Zork programs this meant we actually were setting links as DXIO_PSPP_BALANCED instead of DXIO_PSPP_POWERSAVE. This change adds DXIO_PSPP_DISABLED as the first enum value to properly match the FSP definition and adjusts non AMD Customer Reference Boards that reference the enum to still send the same value even though it has now change definitions. If we actually want DXIO_PSPP_POWERSAVE for those boards that can be adjusted in a future change. BUG=b:193495634 TEST=Boot to OS with Majolica and Guybrush and run 10G iperf on wifi with other server on local network. Change-Id: I287b6d3168697793a2ae8d8e68b4ec824f2ca5ef Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-07-24mb/google/guybrush: Update GPIOs settingsMartin Roth
- The WWAN card was being disabled later than desired. - The SD card was never being placed into reset on BoardID 1. - Enable Touchscreen power - Enable PCIe_RST1 at the same points as PCIe_RST - Remove Redundant Bootblock settings BUG=b:193036827 TEST=Build & Boot, look at GPIO states through boot process Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5431da755d98e4ad0b300d01cac562d61db0bc08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-24src/drivers/intel/fsp2_0: allow larger FSP 2.0 headerNikolai Vyssotski
This is in preparation for migrating EDK2 to more recent version(s). In EDK2 repo commit f2cdb268ef appended an additional field to FSP 2.0 header (FspMultiPhaseSiInitEntryOffset). This increases the length of the header from 72 to 76. Instead of checking for exact length check reported header length against known minimum length for a given FSP version. BUG=b:180186886 TEST=build/boot with both header flavors Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Change-Id: Ie8422447b2cff0a6c536e13014905ffa15c70586 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56190 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-24include/cpu: Remove one space from bitfield macro definitionSubrata Banik
This change is to maintain parity with other macro declarations. Change-Id: I67bf78884adf6bd7faa5bb3afa2c17262c89b770 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56559 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-24include/cpu: Use tab instead of spaceSubrata Banik
Change-Id: I025c20cbcfcfafddbd72b18bca36165b98db8220 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56548 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-24soc/intel/common/block: Add space before comment delimiterSubrata Banik
Update comment section to add space before comment delimiter to follow coding style. Change-Id: I883aeaa9839fa96fd7baf0c771b394409b18ddca Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56547 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-243rdparty/qc_blobs: Uprev to new HEAD (e96cde2)Shelley Chen
Now that cpucp blobs have landed, need to uprev the qc_blobs. Change-Id: I62dc410cee7baf5efa5c0406f35ee05a535f49b1 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-24soc/amd/common/block/cpu/mca/mca_common: remove additional newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I49a27eb084b59db455153dd662d564a95940a0ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/56534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-23soc/amd/stoneyridge/fch: change sb prefix of sb_clk_output_48Mhz to fchFelix Held
Stoneyridge has an integrated FCH and no south bridge, so change the sb prefix to fch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5154ae1158f864d4a2aca55e6bcce6a742c6afe1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56527 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23soc/amd/picasso/fch: change sb prefix of sb_clk_output_48Mhz to fchFelix Held
Picasso has an integrated FCH and no south bridge, so change the sb prefix to fch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I82aed68104ea9570827646c818e100bd7e04d1af Reviewed-on: https://review.coreboot.org/c/coreboot/+/56526 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23soc/amd/picasso/fch: make sb_clk_output_48Mhz staticFelix Held
sb_clk_output_48Mhz is only used in fch.c where it is also implemented, so no need to have it visible outside of that compilation unit. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2b0d10ff26bdf54ea791aa66bf400578466d54cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/56525 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23herobrine: get boardid from GPIO configurationRavi Kumar Bokka
Getting boardid information for the different SKU variants BUG=b:182963902, b:193807794 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I2b7625f9b98563438d1ac20e6f29411ef1058cf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-07-23build system: Deduplicate symbols in objdumpPatrick Georgi
New binutils versions automatically resolve references to debug symbol files and parse their content as well when objdump'ing data. This leads to multiple mentions of symbols, so deduplicate references. Change-Id: I5d597399c515904313ba36d7aab9178bc0dade14 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-23mb/siemens/mc_ehl1: Add GPIO configurationWerner Zeh
Provide a valid GPIO configuration based on the mainboard wiring. Change-Id: I36f0e8292a405b4bac74fbc5fde62e5e414387e7 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56519 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23mb/siemens/mc_ehl1: Remove SD-Card card detect GPIO in devicetreeWerner Zeh
Since there is no SD card interface on this mainboard do not set the card detect GPIO. Change-Id: Ibe6799c5c540538f97d1726ec16e79f3edbb16fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56489 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICEWerner Zeh
Use the Kconfig switch PCI_ALLOW_BUS_MASTER_ANY_DEVICE instead of PCI_ALLOW_BUS_MASTER to enable PCIe bus master bit as requested in CB:56441 during review. Change-Id: I433dbae0d9b15e41d1d0750298868341ce3d6b46 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-07-23drivers/intel/i210: Set PCI bus master bit only if allowedWerner Zeh
Set the bus master bit only if the global Kconfig switch PCI_ALLOW_BUS_MASTER_ANY_DEVICE is enabled. For now the bus master bit is needed for i210 because of some old OS drivers that do not set it and won't work properly without it. Change-Id: I6f727e7f513f4320740fbf49e741cea86edb3247 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-23mainboard/up/squared: Add one more DRAM configurationFlorian Laufenböck
Add a new configuration option with more density for 8GB variants of the up squared board. Settings are taken from slimbootloader. Signed-off-by: Florian Laufenböck <florian@laufenbock.de> Change-Id: I217b04be94e913b75e2bac0a4ae1c43f2411a044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-07-23drivers/pc80/rtc: Make use of alt-century byte configurableNico Huber
This legacy alt-century byte sits amidst CMOS and conflicts many option tables. It usually has no meaning to the hardware and needs to be main- tained manually. Let's disable its usage by default if the CMOS option table is enabled. Change-Id: Ifba3d77120c2474393ac5e64faac1baeeb58c893 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-07-23mb/google/veyron: Remove references to EC firmware board namesPatrick Georgi
Chrome EC is relatively quick with retiring "old" boards from their tree so when upreving it, the last veyron in that list that wasn't commented out is gone as well. Change-Id: Ie1ef693c8d0947396ee01e5aa5f40ef36c8a317a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56430 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-23mb/google/cherry: replace magic numbers by the I2C bus nameRex-BC Chen
When accessing I2C, we should use the official names (I2Cx) instead of magic numbers. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I17cc4c87f5ad26deeb5e529d1c106b697a53591b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56504 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/google/guybrush: Setup EC_IN_RW GPIO and export to payloadKarthikeyan Ramasubramanian
EC_IN_RW_OD signal is routed from Google Security Chip to GPIO_91 in the upcoming hardware build. The existing SD_EX_PRSNT signal is dropped in the upcoming hardware build because SD7 support is dropped. Export the EC_IN_RW GPIO for use by payload. BUG=None TEST=Build and boot to OS in Guybrush. Ensure that the device can boot successfully in both recovery and normal mode. Cq-Depend: chromium:3043702 Change-Id: I8986ba007a2d899c510be61664d90430b8d2d384 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56493 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22drivers/spi: Increase sector number to 14 for Winbond W25Q512NW-IMShaik Sajida Bhanu
Update proper number of sectors info for winbond W25Q512NW-IM chip BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: I12a22321bb9180e32cd47faa6ac3960ba5b2dfb8 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56038 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/siemens/mc_ehl1: Disable GSPI in devicetreeWerner Zeh
Since this mainboard does not use GSPI at all, disable all GSPI ports. Change-Id: I60254e9f4047537d86c972151ec9e33552332959 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-22mb/siemens/mc_ehl1: Adjust I2C bus enablement in devicetreeWerner Zeh
This mainboard uses I2C1 and I2C4 buses only. Disable all the others as they are not connected at all. Change-Id: I4743f6ea6b9a9987ad63b60f56ee9a597a08284b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-22mb/siemens/mc_ehl1: Disable power management features for SATAWerner Zeh
Features like DevSLP and Aggressive Link Power Management are not supported on this mainboard and are therefore disabled. Change-Id: I3bc650ea78be8587889fb7abfe7075cd9a122198 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-22Makefile.inc: Replace linker flag -nostartfiles with --nmagicIru Cai
While the gcc(1) driver has the `-nostartfiles` option, ld(1), the program the coreboot toolchain uses to link the object files, doesn't have it. In binutils before 2.36, this option is interpreted as `-n -o startfiles`, in which the `-o` option is overridden by a later `-o` option, so only the `-n` option has effect, which is the `--nmagic` long option of ld(1). So the correct linker option in this place is `--nmagic`. It is tested that without `--nmagic`, ld can generate a much bigger x86_64 romstage, so this option is still needed. This error is found when trying to update binutils to 2.36 and later versions, where ld(1) is unable to disambiguate options and reports an error. Change-Id: I27dc2209abdc6fec866716a252736c5cf236a347 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-07-22mb/google/dedede/var/cret: Add Wifi SAR for cretIan Feng
Add wifi sar for cret. BUG=b:194163601 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: Ic2f3dbc5822c1f4b1c935c87295ba9916e0e359e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-22mb/siemens/mc_ehl1: Adjust PCIe settings in devicetreeWerner Zeh
This board does not use CLKREQ-signaling for PCIe, so disable the pin assignments. In addition only three clock outputs are used for PCIe, therefore disable all others to improve EMI. Change-Id: I545f890fa55a109df7f44d2c82170874fb769009 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56455 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/siemens/mc_ehl1: Adjust USB port settings in devicetreeWerner Zeh
There are in total three USB ports that are used on mc_ehl1: - Port 1: Type A connector connected to USB2/USB3 port 0 - Port 2: Type A connector connected to USB2/USB3 port 1 - Onboard: connected to USB2 port 2 None of the ports supports overcurrent reporting. Adjust the appropriate UPDs in devicetree to match the hardware configuration. Change-Id: I220637b8e9f03efccacd0955e82cfc0c7a6f53ee Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56454 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/siemens/mc_ehl1: Remove display related UPDs from devicetreeWerner Zeh
Since mc_ehl1 does not have a display attached nor have a display connector available (pure headless design), remove display related settings from the devicetree. Change-Id: Id31c09fcfba15f55eed19134bd0c2fb887bd2478 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56453 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mb/google/brya/variants/redrix: Configure GPIOs according to schematicsWisley Chen
Update initial gpio configuration for redrix BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I2294fb3bdba832677038cfe24b5014014c7f03e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56428 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22soc/qualcomm: move uart_bitbang UART w/gpio code to commonRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: Ic6c70f917a59e233f6ea518d9c39f73fe84991c3 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47284 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-22mainboard/google/herobrine: Add configuration for SD card detect pinShaik Sajida Bhanu
Without this configuration, even though there is no SD card it shows as SD card is present and host controller waits for card to respond. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board with SD card and without SD card, make sure if SD card not present then host controller should not wait for card to respond. Change-Id: I5dc5ba10c98d606d98e7d4f4c41c3e4f45e94452 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-22sc7180: Add target specific GPIO pin definitionsTaniya Das
The common gpio driver can be re-used for SC7180, thus remove the existing gpio driver support and also clean up the common macro definitions. Add GPIO pin details specific to SC7180 chipset for the consumers to be able to request for the gpio functionality as per their requirement. TEST=Validated on qualcomm sc7180 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: Ifd206e6bc9a549706e7a2c4bde0b7d5527ca6268 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21soc/amd/cezanne/mca: add and use mca_bank_name[]Felix Held
This enables the MCAX checking and BERT entry generation for Cezanne. TEST=When printing all registers of all MCAX banks of core 0 on a google/guybrush device, the registers have values that look correctly and there is no general protection fault, so all MCAX MSRs that could be accessed exist on Cezanne. BUG=b:192997706 Change-Id: Ibe8047ce5bb5e7136a8786693bcced4d2225b1fd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56345 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya/variants/primus: Update two GPIOsariel fang
1. Move M2_SSD_PLN_L to GPP_D3 for power loss notify function. 2. Set GPP_E21 as NC to remove LCLW_DET function BUG=b:190643562 Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: Id3c60adeb5d35c79a1c700937f93a80ad3587c5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56420 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21soc/amd/cezanne: enable crypto in psp_verstageKangheui Won
Enable RSA and SHA for cezanne since support has been added to the PSP. Also picasso and cezanne have different enums definitions for hash algorithm, so split that out into chipset.c. BUG=b:187906425 TEST=boot guybrush, check cbmem -t and the logs Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I725b0cac801ac0429f362a83aa58a8b9de158550 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-07-21commonlib/timestamp,amd/common/block/cpu: Add uCode timestampsRaul E Rangel
This allows keeping track of how long it takes to load the microcode. BUG=b:179699789 TEST=Boot guybrush 112:started reading uCode 990,448 (10,615) 113:finished reading uCode 991,722 (1,274) Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I86b67cf9d17786a380e90130a8fe424734e64657 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-07-21soc/qualcomm/sc7280: Replace gpio offset value with macroTaniya Das
Use the gpio offset macro instead of a constant value. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: Ia9e4b9ca7216092665f0a06ce467da01963c2364 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21mb/google/brya: Program Unused Cnvi BT related GPIOs to NCMaulik V Vaghela
Program unused Cnvi BT UART GPIOs as NC since we are using Bluetooth over USB mode for Brya. Change-Id: I33a37ceb8a91603d2a193de5bdd1b6885eb3c319 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55317 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya: Create taeko variantKevin Chang
Create the taeko variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:193685558 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TAEKO Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: If738849bc3103c52a4c4d8a8aaef3f90a62ad5c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56385 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/brya/var/gimble: Include SPD for MT53E1G32D2NP-046 WT:A and ↵Mark Hsieh
K4U6E3S4AA-MGCR Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:A and K4U6E3S4AA-MGCR. BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4bfc18fd42c6ff2675e6f836c2ecc9617fac3aff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56329 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowedWerner Zeh
Take Kconfig switch PCI_ALLOW_BUS_MASTER into account and set the PCI bus master bit for legacy devices only if it is allowed. Change-Id: I7798a767d528419bb093f301140ab68cc8b9c5ae Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-21mb/google/brya: Add variant specific soc chip config updateSugnan Prabhu S
This patch adds support for variant specific soc chip config update function. Change-Id: Ic3a3ae0b409433e6dfa102c5e7a6322d4f78f730 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-21mb/google/octopus/variants/ampton: Resume from suspend on critical batteryJames Chao
This patch makes Ampton EC wake up AP from s0ix when the state of charge drops to 2%. Demonstrated as follows: 1. Boot Ampton. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 2. 4. System resumes. BUG=b:189540432 BRANCH=Octopus TEST=Verified on Ampton. Change-Id: I98d8e6ea185e8782ad675d4668678b341ca5d350 Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56341 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21tests/Makefile.inc: Correct dependency file suffixYu-Ping Wu
The dependency file, generated by $(HOSTCC) ... -MMD -MT $@ -c $< -o $@.orig is determined by replacing the suffix of "$@.orig" with ".d", resulting in "$@.d" (which is *.o.d). The file name was accidentally changed in CB:55360. Now explicitly specify the path by the "-MF" option. BUG=none TEST=make unit-tests; find build/tests/ -name "*.d" BRANCH=none Change-Id: I01f77ebaaae78dd9e69394a49e524f1013857195 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-07-21mb/google/brya/variants/primus: add dram part idMalik_Hsu
This change adds mem_parts_uesd.txt that contains the new memory parts used by primus and Makefile.inc generated by gen_part_id.go using mem_parts_used.txt. BUG=b:193813079 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I6aa37114f3a164a4f3c35dfc9b43e1106b825bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-21mb/google/herobrine: Retrieve SKU ID from ECPhilip Chen
BUG=b:186264627 BRANCH=none TEST=build herobrine Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Id3faf7af64c0129ec646a01085adc43b561225d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21sc7180: Renaming the GPIO macro in QSPI and I2C driverRavi Kumar Bokka
As part of GPIO driver cleanup across qcom chipsets, GPIO_OUTPUT_ENABLE has been renamed to GPIO_OUTPUT. BUG=b:182963902 TEST=Validated on qualcomm sc7180 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I51eedc722a91c5ea8e009fb8468a60667d374b49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21soc/qualcomm/common/gpio: Define a macro for the gpio offsetTaniya Das
Defining a macro for the gpio offset instead of a constant value. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: Iefdde8f8331cf1df2e88a2c8915aefb4fa091d65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-21mb/google/cherry: add mt6360 support for MT8195Rex-BC Chen
For new MT8195 devices we will control mt6360 via EC, so we have to add ec function of controlling MT6360 and add CONFIG to separate them. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic2228f5b45173f0905ea66a3a1f00ec820e0f855 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-21mb/google/cherry: initialize SD card reader using regulator interfaceRex-BC Chen
TEST=boot kernel from sd card pass on Cherry board. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic20a2f3f053130ded202cf5ec861450f0f18eed0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56437 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/intel/ehlcrb: Update FIVR configsLean Sheng Tan
This patch sets the optimized FIVR configs for ehlcrb customized based on the performance measurements to achieve the better power savings in sleep states. - Enable the external V1p05, Vnn, VnnSx rails in S0i3, S3, S4, S5 states. - Update the supported voltage states. - Update max supported current, voltage transition time and RFI spread spectrum. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I1e30ff6d84bfe078fcce0f968fce6aaab7fd575b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55981 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/cherry: add mt6360 ids for regulator.cRex-BC Chen
Add MTK_REGULATOR_VCC and MTK_REGULATOR_VCCQ for regulator.c. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iedb1036da3c87106157c51cc46b52545faba102c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56436 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21soc/mediatek/mt8195: modify mt6360 interfaceRex-BC Chen
With the new definition of mt6360_regulator_id, merge the MT6360 LDO and PMIC interfaces into one. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7ccc32cb0a9481d5f55349c152267a44fe09d20a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-21soc/mediatek/mt8195: redefine mt6360_regulator_idRex-BC Chen
On MT8195 platforms with BC1.2, we have to use EC to control MT6360 so the mt6360_regulator_id is redefined to match the numbers defined in EC driver. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I9437edb9776442759ce04c31d315c3760078ffb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56434 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/intel/adlrvp: Enable I2S audio codecs on ADL-M RVPAnil Kumar
- Add configurability using FW_CONFIG field in CBI, to enable/disable I2S codec support for MAX98373 codecs - AUDIO=ADL_MAX98373_ALC5682I_I2S: enable max98373 codec using expansion board Bug=None Test=With CBI FW_CONFIG set to 0x100, check I2S audio output on expansion card Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: If2649647e58c5f30e2b539d534adf2a4e68f4fda Reviewed-on: https://review.coreboot.org/c/coreboot/+/52221 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21Revert "mb/google/brya: Enable south XHCI ports 1 and 2"Tim Wawrzynczak
This reverts commit f7f715dff38c4a629139b2493ed6e0d7cc2eb36f. Reason for revert: FSP 2207.01 uses the UsbTcPortEn UPD for TCSS XHCI enable BUG=b:184324979 TEST=boot brya, all 3 USB Type-C ports still enumerate devices Change-Id: I82bae21d185247bc0f3580fd6f92abb8eece6732 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56132 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-20device/pci_rom: Make ON_DEVICE_ROM_LOAD condition truthyRaul E Rangel
Truthy conditions are easier to reason about. BUG=none TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I229c3e90f5122d6191b28f9b4b6de79ac2fcb627 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-20device/pci_rom: Convert #if to C codeRaul E Rangel
No reason to use the preprocessor for this. BUG=none TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I920dfa2d27c2eb27e8bc50c615ccd13601610fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-20lib/cbfs,device/pci_rom: Move cbfs_boot_map_optionrom and modernizeRaul E Rangel
These methods are oprom specific. Move them out of CBFS. I also deleted the tohex methods and replaced them with snprintf. BUG=b:179699789 TEST=Boot guybrush and see oprom still loads Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I03791f19c93fabfe62d9ecd4f9b4fad0e6a6146e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-20tests/Makefile.inc: Add missing KCONFIG_SPITCONFIG trailing slashJakub Czapiga
New version of kconfig requires trailing slash at the end of KCONFIG_SPLITCONFIG to indicate that it is a directory path. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I1a11eca21c4aa5a6260006c4ba2cb419eca8a802 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-07-20soc/intel/alderlake: Add support for I2C6 and I2C7Varshit B Pandya
As per the EDS revision 1.3 add support for I2C6 and I2C7. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: Id918d55e48b91993af9de8381995917aef55edc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55996 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-20soc/amd/picasso/makefile: order source files alphabeticallyFelix Held
Change-Id: I6eb0881ab05730b094caef2a9258c4d4d827195b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-07-20soc/amd/cezanne/makefile: order source files alphabeticallyFelix Held
Change-Id: I4726ba4f19807adf872aaf04764cc19492febd59 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-07-20mb/siemens/mc_ehl: Move SPD data to variant directoryWerner Zeh
Since the variants can have different memory move the SPD related content to the variant directory. Change-Id: I38aa5e7514437bfcc61c38d64f0ba6f19350810d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56036 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-20mb/google/volteer/variants/collis: Fix pen ejection eventFrankChu
Modify PENH device GPIO GPP_E17 for pen ejection event. BUG=b:192511670,b:193093749 BRANCH=firmware-volteer-13672.B TEST=test pen insert and remove by evtest , SW_PEN_INSERT value 1 when insert pen to pen slot. SW_PEN_INSERT value 0 when remove pen from pen slot. Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ida5e5b35464471a7896cef392e178a3d2c0ea1aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/56331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2021-07-19grunt/treeya: add Realtek ALC5682 codec supportKevin Chang
Replace audio codec from DA7219 to Realtek ALC5682. Add Realtek ALC5682 support. BUG=b:185972050 BRANCH=master TEST=check on treeya system ALC5682 audio codec is working normally. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I49c673fd944b2c2a79c4283eee941a16596ba7fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/56100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-07-19mb/{google, intel}: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I411f4f2c237a9e2d39038ee30f2957698ee053bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-19soc/amd/{cezanne,picasso}: Escape PSP_VERSTAGE_FILE defaultRaul E Rangel
If we don't escape the $ then the actual $(obj) path will be written into the .config file. With this change `$(obj)` is written into the .config file. The Makefile then does: PSP_VERSTAGE_FILE=$(call strip_quotes,$(CONFIG_PSP_VERSTAGE_FILE)) Since this is a recursive assignment the $(obj) will be expanded at that point. This change makes it easier to compare full .config files. BUG=none TEST=Build ezkinil Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic961df148d3f22585f3441d75c3f2454329c678a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-07-19soc/amd/{common,cezanne}: Implement HAVE_PAYLOAD_PRELOAD_CACHERaul E Rangel
This change allows preloading the payload. BUG=b:179699789 TEST=Boot guybrush and see payload read/decompress drop by 20 ms. We now spend 7ms decompression from RAM. By switching to LZ4 we drop that to 500us. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3ec78e628f24f2ba0c9fcf2a9e3bde64687eec44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-07-19payloads: FILO: Hook up autoboot optionsPaul Menzel
FILO allows to configure a line to autoboot. Hook this up into coreboot’s build system. TEST=Configure coreboot for QEMU i440fx with FILO as payload and configure: CONFIG_FILO_MASTER=y CONFIG_FILO_USE_AUTOBOOT=y CONFIG_FILO_AUTOBOOT_FILE="hda1:/vmlinuz root=/dev/sda1 console=tty0 console=ttyS0,115200 initrd=hda1:/initrd.img" CONFIG_FILO_AUTOBOOT_DELAY=5 Boot Debian image with: qemu-system-x86_64 -bios /dev/shm/coreboot/build/coreboot.rom -L /dev/shm -enable-kvm -smp cpus=2 -m 1G -hda /dev/shm/debian-32.img -serial stdio -net nic -net user,hostfwd=tcp::22222-:22 Change-Id: Id167e9a144bf466da87469108002672b299b702a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-19soc/intel/common: Rename kconfig PMC_EPOCLean Sheng Tan
Rename PMC_EPOC to SOC_INTEL_COMMON_BLOCK_PMC_EPOC to maintain common naming convention. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If8a264007bbb85a44bbdfa72115eb687c32ec36e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:30:18 +0000