| Age | Commit message (Collapse) | Author |
|---|
|
Control bits located by changing tristate power
restoration value in proprietary BIOS, booting into
Linux, dumping the entire CK804 configuration space,
then comparing values against those dumped earlier.
"Last state" control bit(s) are unknown at this time.
TEST: Boot ASUS KFSN4-DRE with both coreboot power on
and power off after power failure settings, then
pull power plug / reinsert power plug and verify
mainboard behaviour matches setting.
Change-Id: I737bdd35632fe786968a1cb8458e56c785363cfa
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8258
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
|
|
Add basic support for rush board
BUG=None
BRANCH=None
TEST=Compiles successfully with soc tegra132 and armv8 arch selected for
romstage and ramstage
Original-Change-Id: Ica57c68d230e4e0e9916729752395843de188733
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197399
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 06a040dc320d7b04ec0f7e51c1b3987c8f6d80f3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ica57c68d230e4e0e9916729752395843de188733
Reviewed-on: http://review.coreboot.org/8041
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add basic support for tegra132 soc.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush board using tegra132 soc
Original-Change-Id: If2a3de80026e7729ac6da8484ff6c56607c52a63
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197398
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 4746bff6e9f4b20abc44d0b6fce9691aea63583c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If2a3de80026e7729ac6da8484ff6c56607c52a63
Reviewed-on: http://review.coreboot.org/8040
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There were a number of issues with the ARM64 build files. This
patch ports the following changes from ARMV4/V7 to ARMV8:
- make armv8 Kconfig options consistent with armv4/v7
- fix build include issues in boot.c, tables.c,
and early_variables.h by matching armv4/v7.
Change-Id: I57359a96821d88c50f48dc0bb6ad226cacb0c2ec
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iacd95d336559c45458784d1da67bde62a0956620
Reviewed-on: http://review.coreboot.org/8236
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
coreboot toolchain.inc uses the ARCH_SUPPORTED variable set
by xcompile. This change allows for consistent naming in the
toolchain.inc generated variables.
Change-Id: Iafed06cf2d19a533f99e10b76aca82adc3e09fa8
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8235
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Toolchain.inc fails with strange shell errors if the CC_$(stage)
doesn't expands correctly. The cause is that the ARCH_SUPPORTED
doesn't have the required toolchain for the stage.
Change-Id: Id284ce281546b2b1b166f2b13d087bc6b114440e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8257
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I83e7605650b13e82a2e6c2822cbd237b4e473b5d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8271
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Icbbba0037c19bdc279813e51c72f54a10e4dc55a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8263
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib63a8b6e7f4663926104426992f6dea9ee3510b0
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8262
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The length of the memcpy is incorrect and this will cause the
destination buffer to corrupt the following 2 bytes of data.
BUG=none
BRANCH=All
TEST=build and boot on rambi, system boot up without error
Change-Id: I96adf2555b01aa35bb38a2e0f221fc2b2e87a41b
Signed-off-by: Zhuo-Hao Lee <zhuo-hao.lee@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/237510
Reviewed-by: Ryan Lin <ryan.lin@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
[Remove usage of macro `FIELD_SIZEOF(t, f)`.]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8227
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This must be committed at the same time as the corresponding
depthcharge change which updates the fmap.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=Build samus firmware.
dump_fmap -h /build/samus/firmware/image.bin shows PD_MAIN_A and
PD_MAIN_B sections.
Boot samus. 'crossystem mainfw_act' -> A
As root, 'crossystem fwb_tries=1'
Reboot samus. 'crossystem mainfw_act' -> B
CQ-DEPEND=CL:208984,CL:*169850,CL:208989
Original-Change-Id: Ibccec8b82ba22c61248a79023f42b92e4763403e
Original-Signed-off-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208899
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit d241e1dddaf8a435e49e08e60e4ad998735d2137)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ida8f7bd68d71e2a4a47e304b8f8283b566c52837
Reviewed-on: http://review.coreboot.org/8219
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
In order to ensure that we meet timing requirements for the SSD
power sequencing delay bringing the SSD out of reset until after
memory training.
BUG=chrome-os-partner:29914
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: I807e3d3698255287c3fe7219f44e8ec9a0985df1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208155
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1cf557049c49e1ba11ade1eee7a45fc2b075ff3d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib39a14a03e04a167fab45b58b3bc840eb4bcf317
Reviewed-on: http://review.coreboot.org/8215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Add workarounds for power and/or lpddr3 issues on Broadwell SKU.
BUG=chrome-os-partner:29787,chrome-os-partner:29117
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: If99346212c10ad6026250e48bedd916611e2cb8c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208154
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c3ee57114315320b542f53645ffb168ad654b756)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie28f3ad65000a627ba64486e0f16493e8101cef3
Reviewed-on: http://review.coreboot.org/8214
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Turn on keyboard backlight early in boot (not resume) path
as a sign of life for the system
- Add ACPI device for keyboard backlight so the kernel can find
and make use of it
BUG=chrome-os-partner:30586
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: Iecaef0ec5c814774e19d7c4a14cb92dc236cfee3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208152
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit e166f76f9bd167468c7637dcce2b9eabf7dce8f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I47927d97c1586ec09310d014d8fba7d7a3d773c4
Reviewed-on: http://review.coreboot.org/8213
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Add codec acpi resource for supporting RT5667 codec.
BUG=chrome-os-partner:29649
TEST=emerge-coreboot successfully
checked codec device is probed
Original-Change-Id: I739c0dbfdbfa221b06f99c3d934825b640096c6b
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207707
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit f9698c45a47efe7fd2a1f5432640f3db5e4bd3f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib14b27421613d747e02037ecd2311d9966a5d813
Reviewed-on: http://review.coreboot.org/8212
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Configuration for GNB GPP was incorrect, only PCIe x1 cards worked.
Change-Id: I369bf6382080e6034ff138ac664c76b03280ca69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8229
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
'blobs' now contains the update for the BaldEagle binaryPI.
Change-Id: I7ed423b17cee926205792223d6355277bedad552
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8232
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Due to some projects don't have the correct settings in devicetree.cb
so put this change in case those projects without are setting in devicetree.cb
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
even there is no setting in devicetree
Original-Change-Id: Iaf8155497c41f10c81d1faa7bb0e3452a7cedcc6
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209051
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 713f809952a2d8da434d619d48cb7ddce1991925)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I86f9b77e703d2b844fa636678499c47ffaffeede
Reviewed-on: http://review.coreboot.org/8218
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
USBPHY_COMPBG needs to be configured by project
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
CQ-DEPEND=CL:208557
Original-Change-Id: I8f2714644e1ef5d790d7ef1f574ebb998abbdac6
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208731
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 1e9aeebb769e30940175cf3c38afe7ecfa69b5b4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I28aa445ccb4506db65784e30253dd16161b2bc75
Reviewed-on: http://review.coreboot.org/8217
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
USBPHY_COMPBG needs to be configured by project
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
Original-Change-Id: I05eee384d94cf5deeec14418bd78816df0b26a92
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208557
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 20a9c0ab7ab180596821751110f0c0a35d3ff3a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8bed3fa4e74e4bb4c93fa522d9df631bac2d9795
Reviewed-on: http://review.coreboot.org/8216
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I5687c24fcecd26e7656317eb8dde0f1f798e49fc
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209335
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 707cb3e274aa7eabc8e1792fc09d05b4c9e95913)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a40acbb14a5ba5c6e4d552b67a331256567d5b4
Reviewed-on: http://review.coreboot.org/8220
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I828776724dce287d9a7eb732f2c9ecccf8d68229
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209336
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit b50c9441ddaeabc5aa039f2141853ed7ba7a9d5b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6e81312609448c531345e592ee371ea53dc0916c
Reviewed-on: http://review.coreboot.org/8221
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
BUG=None
BRANCH=None
TEST=Compiles
Original-Change-Id: I3a747cb562e7390bb81eca874d6c5aaa54b81e6e
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209337
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5d3aef321a9313719308909ec40fdad0ec631a9f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia8edf54f65947be12a7ae69f6825545fb2aed0f1
Reviewed-on: http://review.coreboot.org/8222
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
'blobs' now contains the update for the Mullins binaryPI.
Change-Id: Ife5dc73a856697c23a6d6b27fd5280f972992631
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8230
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The correct type-signature of 'do_smbus_write_byte' is:
int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val)
and so storing the return type in a 'u32' is inappropriate, leading
to a tautological compare of 'ret < 0' and 'err < 0'.
Change-Id: I65486df7156c70af84fa00c336142d9a45998620
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8209
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Silence unused variable warning.
Change-Id: I2671e0843a60e5bd857b233a45ea68715461f187
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8202
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It's not a SPI related macro, hence move it to stddef.h where
other similar macros live.
Change-Id: I1008894af7a272f1bc36d3ae6cee3881132b6ba9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8109
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
No reason to carry timestamps on CAR stack, as implementation
of timestamps internally stashes on CAR_GLOBAL table and migrates
those to CBMEM.
Change-Id: I5b3307df728b18cd7ebf3352f7f7e270ed1e9002
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8022
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This reverts commit 320647abdad1ea6cdceb834933507677020ea388, because it
introduced the following regression.
$ LANG=C make V=1
Warning: no suitable GCC for arm.
Warning: no suitable GCC for aarch64.
Warning: no suitable GCC for riscv.
/bin/sh: --: invalid option
Usage: /bin/sh [GNU long option] [option] ...
/bin/sh [GNU long option] [option] script-file ...
GNU long options:
--debug
--debugger
--dump-po-strings
--dump-strings
--help
--init-file
--login
--noediting
--noprofile
--norc
--posix
--rcfile
--restricted
--verbose
--version
Shell options:
-ilrsD or -c command or -O shopt_option (invocation only)
-abefhkmnptuvxBCHP or -o option
make: -print-libgcc-file-name: Command not found
It also introduced trailing whitespace.
Change-Id: I50ec00a38e24c854fa926357cd24f9286bf4f66f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8223
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Remove useless AGESA microcode macro that leads to unused variable
warnings.
Change-Id: Ia21bfc758f81e349bdd0bfd185df75e8b1898336
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8200
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Change-Id: I1f94171173d0b3d672aebeb0dd901dd292028711
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8199
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Verstage will host vboot2 for firmware verification.
It's a stage in the sense that it has its own set of toolchains, compiler flags,
and includes. This allows us to easily add object files as needed. But
it's directly linked to bootblock. This allows us to avoid code
duplication for stage loading and jumping (e.g. cbfs driver) for the boards
where bootblock has to run in a different architecture (e.g. Tegra124).
To avoid name space conflict, verstage symbols are prefixed with verstage_.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac
Original-Reviewed-on: https://chromium-review.googlesource.com/204376
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I42b2b3854a24ef6cda2316eb741ca379f41516e0
Reviewed-on: http://review.coreboot.org/8159
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch brings the cbmem utility in line with the recent change to
coreboot's device tree binding. Since trying to find the right node to
place this binding has been so hard (and still isn't quite agreed upon),
and because it's really the more correct thing to do, this code searches
through the device tree for the 'coreboot' compatible property instead
of looking up a hardcoded path. It also provides bullet-proof
'#address-cells' handling that should work for any endianness and size.
BUG=chrome-os-partner:29311
TEST=Ran cbmem -c and cbmem -t on Nyan_Big. Also straced the to make
sure everything looks as expected. 'time cbmem -t' = ~35ms shows that
there is no serious performance problem from the more thorough lookup
code.
Original-Change-Id: I806a21270ba6cec6e81232075749016eaf18508b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204274
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit 3e64e28f684e60e8b300906c1abffee75ec6a5c2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0a0a4f69330d3d8c5c3ea92b55f5dde4d43fca65
Reviewed-on: http://review.coreboot.org/8141
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Allow for reading from cbfs media without having a handle
to a non-CBFS_DEFAULT_MEDIA cbfs_media. In conjunction with
cbfs_locate_file() one can locate and cbfs_read() a file
without bringing the entire file through a potentially
temporary buffer (non-memory-mappable cbfs media platforms).
BUG=chrome-os-partner:29922
BRANCH=None
TEST=Built.
Original-Change-Id: Ib5d965334bce1267650fc23c9e9f496675cf8450
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205991
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 85200f28863e5ea8888322f5787dc6de9a2999f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I25e3221beefd0155305ad63da6be9f47e756f7d0
Reviewed-on: http://review.coreboot.org/8181
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
cbfs_locate_file() can be used to locate the data within the
cbfs file. Based on the offset and length of the file it can
then be read into any address without bringing the contents
into another buffer (platforms without memory-mapped access
to entire contents of cbfs at once).
BUG=chrome-os-partner:29922
BRANCH=None
TEST=Built and booted rush into romstage (stage load still works).
Original-Change-Id: I2932f66478c74511ec1c876b09794d9a22a526b3
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/206000
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 56c958facd379ca0eeebe1b689e3b80d5e692699)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0c4964132af615a069258c0eb37153bd84fbbfae
Reviewed-on: http://review.coreboot.org/8180
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove the arch check for each stage as the arch for different stages can be
different based on the SoC. e.g.: Rush has arm32-based romstage whereas
arm64-based ramstage
BUG=None
BRANCH=None
TEST=Compiles successfully for nyan, link and rush
Original-Change-Id: I561dab5a5d87c6b93b8d667857d5e181ff72e35d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205761
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 6a6a87b65fcab5a7e8163258c7e8d704fa8d97c3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic412d60d8a72dac4f9807cae5d8c89499a157f96
Reviewed-on: http://review.coreboot.org/8179
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When included for the CAR transition, this was causing the error:
error: invalid storage class for function 'DebugDeadLoop'
Change-Id: Idf37a8104b4468b40c29c8cbe9a40f7a357a4f17
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8193
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Put functions in appropriate pre-processor sections to avoid
false-positive 'unused function' compiler warnings.
Change-Id: Ia83d721827ad9924807c0ca5ebd681060af49a82
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8203
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: I25bdee38cedbe38cd447483d3e8b3bdc3f646a62
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8201
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Add missing parameters
- add missing @param commands
Change-Id: I029b5dafde94bd250800b06c0e9bd2118f10ef48
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8173
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Put functions in appropriate pre-processor sections to avoid
false-positive 'unused function' compiler warnings.
Change-Id: Ie4955ee9df6904c38848f46226b53be37d9fa239
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8157
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Put function under same guard as its call site so that the
compiler does not emit a warn about unused functions upon
a false branch of the guard.
Change-Id: I899d539ec5fbb87e7469415cc8d15837ba8e63f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8156
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
I would appear from commit a6354a1 that this is now dead code.
Change-Id: I0f74183c9a5d8cc6ff5a11409d487cc45d9ed2df
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8168
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
These boards don't have Super I/O's, rather they use Embedded
Controllers instead. No need to confuse with Super I/O related
stuff showing up in menuconfig.
Change-Id: I4922319daf7920bf5331b5bce05ded0d9a31a69b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7986
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Looks like we got our first SoC that actually insists on using
word-sized accesses for its MMIO registers with the Rk3288. This patch
changes the GDB command handler for reading and writing memory to always
perform word-sized accesses. This isn't really perfect since the remote
GDB interface is just not really meant to interact with MMIO (e.g. you
shouldn't use this on something with read side effects), but for most
of our purposes it should be good enough.
BUG=chrome-os-partner:18390
TEST=Remote GDB works on Veyron even when writing MMIO registers.
Original-Change-Id: I2ae52636593499f70701582811f1b692c1ea8fcc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208554
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 028940934e6b45a02122b61bb859588bf8671938)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4185a6efe9a5211525781acd0a167b821e854211
Reviewed-on: http://review.coreboot.org/8130
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
setbits_le32() is not really arch-specific... the arch-specific part of
accessing memory is wrapped by readl() and writel(), and the endianness
can be accounted for with the right macros. Generalize the definitions,
add a be32 version and move them to endian.h so that all platforms can
use them. Also include endian.h from libpayload.h so we won't update any
payload's old use of the macros (endianness is something useful enough
to always have avalable anyway, and shouldn't clash with other things).
This also fixes a bug where these macros would only be available if
libpayload-config.h had been independently included before.
Also fix a bug with readl() macros on all archs where they refused to
work on const pointers (which they should).
CQ-DEPEND=CL:208712
BUG=None
TEST=Stuff still compiles. Built and booted on Storm.
Original-Change-Id: I01a7fbadbb5d740675657d95c1e969027562ba8c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208713
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 951f8a6d77bc21bd793bf4f228a0965ade586f00)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I51c25f01b200b91abbe32c879905349bb05dc9c8
Reviewed-on: http://review.coreboot.org/8129
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
In cases where timer clock frequency is not an integer number of
megahertz, the calculations in timer_us() lack accuracy.
This patch modifies calculations to reduce the error. The maximum
interval this calculation would support decreases, but it still is in
excess of 1844674 seconds for a timer clocked by 10 MHz, which is more
than enough.
BUG=none
TEST=manual
. verified timer accuracy using a depthcharge CLI command
Original-Change-Id: Iffb323db10e74b0ce3b4d59a56983bfee12e6805
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207358
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e1abf87d438de1a04714482d5b610671e8cc0663)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia892726187ab040dd235f493c92856c15951cc06
Reviewed-on: http://review.coreboot.org/8128
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Add support:
1)Support driver rktimer
2)Support driver rkserial
BUG=chrome-os-partner:29778
TEST=emerge-veyron libpayload
Original-Change-Id: I2cccedf3b62883dd372842a7972e93f2ebbfb282
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206184
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 387450d7c36b201bd177d46eb9f1d280fc043aab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia6b7a8ee2439a6f2bf7577df822d3f4f3a1e441c
Reviewed-on: http://review.coreboot.org/8127
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Function was orginally used for reverse engineering.
Change-Id: I646dddd39e61b59358b29a49239c0a1de77c7e55
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8158
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This replaces acpi_is_wakeup_early().
Change-Id: I23112c1fc7b6f99584bc065fbf6b10fb073b1eb6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8187
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
If HAVE_ACPI_RESUME gets implemented, EARLY_CBMEM_INIT is
required too.
Change-Id: I8c7932297e0938eff629d1e46081ccf3e7690aea
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8185
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I71d522b135dff8b3c287699cc649caece9e4342c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8186
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This just fixes name members of mainboard_ops for daisy and
peach_pit, which were never officially supported but used for
development and proof-of-concept.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ia1f9b62bc9d91ed634ec1eaa7f907e8aed977f96
Reviewed-on: http://review.coreboot.org/8184
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Place the mrc.cache file at top of CBFS. There is no real requirement
for it to have a fixed location though.
Change-Id: Ibebe848a573b41788c9d84388be8ced68957f367
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7962
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Due to the CST entries the machine uses less power running
GNU/Linux-libre. This can be seen by monitoring CPU temperature
and time left the machine can run on battery. CPU temperature
measurements have been done with lm_sensors, battery querying
with acpi. Tests have been done before applying this patch and
after. In both cases the battery was fully loaded and the machine
powered up on battery, without AC. In both tests the machine was
idleing for more than 1 hour.
Without this patch battery was predicted to last 01:52:30 hours,
CPU temperature first measurement showed 38 degrees. After 15 min
idle, temperature has reached its maximum value in this test of
61 and 62 degrees (Core 0 and 1). Fan speed begins to increase
shortly after 15 min. From its minimal value 1800 rpm it reaches
3100 rpm after 40 min. CPU temperature did not increase any further.
After 60 min idle, the battery was predicted to still last 57 min.
With this patch battery was predicted to last 02:22:40 hours. That
is plus 30 min. CPU temperature begins at 35 degrees. After 15 min
temperature has reached 45 degrees; after 30 min it has reached
the maximal temperature during this test of about 50 degrees.
That is 10 degrees improvement. The fan stayed at minimal speed.
After 60 min idle, the battery was predicted to still last 01:22:48
hours; a 25 minute improvement.
Change-Id: I6b2173df1dc09300329b61b51b79f4b9f4a8fb13
Signed-off-by: Axel Holewa <mono@posteo.de>
Reviewed-on: http://review.coreboot.org/7923
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This adds a generic primitive memory test. We should look into
using tests in src/lib/ramtest.c, but they seem to rely too heavily
on x86 asm and this test has been useful on multiple ARM platforms.
BUG=none
BRANCH=none
TEST=builds and runs on nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ia0fb4e12bc59bf708be13faf63c346b531eb3aed
Original-Reviewed-on: https://chromium-review.googlesource.com/186309
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e7625c15415eaf6053ce32b67d9d6ab18d776f5f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Conflicts:
src/lib/Makefile.inc
Change-Id: I34e7aedfd167199fd5db4cd4a766b2b80ddda79b
Reviewed-on: http://review.coreboot.org/8150
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
In the original fix for the 'Lost arb' we were seeing on
Nyan* during reboot stress testing, I had the name of
BC_TERMINATE's bit setting wrong. Fix this to use the
IMMEDIATE (1) setting. The setting didn't change, just
the name. According to Julius this is the optimal
setting for bus clear in this instance. Also widened
the SCLK_THRESHOLD mask to 8 bits as per spec.
BUG=chrome-os-partner:28323
BRANCH=nyan
TEST=Tested on nyan. Built for nyan and nyan_big.
Original-Change-Id: I19588690924b83431d9f4d3d2eb64f4947849a33
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/206409
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 76e08d0cb0fb87e2c75d3086930f272b645ecf4e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If187ddf53660feaceab96efe44a3aadad60c43ff
Reviewed-on: http://review.coreboot.org/8152
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
We assume that the clock rate of SCLK/HCLK/PCLK was 408MHz which was same
as PLLP. But that is incorrect, BootROM had switched it to pllp_out2
with the rate 204MHz. So actually the warm boot procedure was running at
the condition of SCLK=HCLK=PCLK=pllp_out2 with the rate 204MHz.
And the CPU complex power on sequences were different with what we used
in kernel and Coreboot. Fix up the sequence as below.
* enable CPU clk
* power on CPU complex
* remove I/O clamps
* remove CPU reset
Update the time of the CPU complex power on function for record.
* power_on_partition(PARTID_CRAIL): 528 uSec
* power_on_partition(PARTID_CONC): 0 uSec
* power_on_partition(PARTID_CE0): 4 uSec
Finally, removing the redundant routine of a flow controller event with
(20 | MSEC_EVENT | MODE_STOP).
BUG=chrome-os-partner:29394
BRANCH=none
TEST=manually test LP0 with lid switch quickly and make sure the last
write to restore register successfully
Original-Change-Id: Ifb99ed239eb5572351b8d896535a7c451c17b8f8
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205901
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
(cherry picked from commit 4194a9af3999da4b061584cda9649944ec0fdfb1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If21d17dc888b2c289970163e4f695423173ca03d
Reviewed-on: http://review.coreboot.org/8151
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Iad31ae3e511c8ebacc973b2d8a8e3bfca719ee7c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7583
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Propagate commit 9107e53 from amd/agesa and fix some
related #includes under cpu/amd/pi.
Change test to return true on S2 wakeup too. In S2 CPU would
have been powered down so MTRR recovery is required.
Change-Id: I18cb31c1124da53e5fcba2610f6b02d755feb092
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8171
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Trivial; Use tab over space for indent.
Change-Id: Iba0e006197a020157b11746dd4999d87a8ca8d97
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8015
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This serves as supplemental patch to CL:197732. After clearing bus, we
should also redo controller init (because controller has been reset
before bus clear). On the upper layer, upon receiving error return status,
it should just retry instead of simply call cpu_reset().
BUG=chrome-os-partner:28323
BRANCH=nyan
TEST=Built and tested on nyan and nyan_big.
Original-Change-Id: Ib526bc730cb73ffef8696fc2a6a2769d6e71eb9e
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/202784
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 06f8917c70ddca88c847d0f15ebe7f286a3f6338)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1d8bc43d730b53fe7f2dad8713831311e96e3984
Reviewed-on: http://review.coreboot.org/8145
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
For arm64, the machine type is arm64 in cbfstool, however it was displayed as
aarch64 in help message. This patch corrects it.
BUG=None
BRANCH=None
TEST=None
Original-Change-Id: I0319907d6c9d136707ed35d6e9686ba67da7dfb2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204379
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 1f5f4c853efac5d842147ca0373cf9b5dd9f0ad0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I00f51f1d4a9e336367f0619910fd8eb965b69bab
Reviewed-on: http://review.coreboot.org/8144
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
TEST=Booted Nyan Blaze
BUG=none
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I7e822e16117240f732ac55bb2c3816486a3e10cc
Original-Reviewed-on: https://chromium-review.googlesource.com/204870
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 967455d6fed014f82198de4987ec103bb7c33d25)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I88025887fb0134f1e75028e0a4ed0c78af281c96
Reviewed-on: http://review.coreboot.org/8143
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This makes it so that we always log the generic "system boot" event.
If boot count support has not been implemented, fake it.
BUG=chrome-os-partner:28772
BRANCH=nyan
TEST=booted on Big, ran "mosys eventlog list" and saw
"System boot" event logged with boot count == 0
Original-Change-Id: I729e28feb94546acf6173e7b67990f5b29d02fc7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204525
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 2598dc63ddc0d76bcdf9814cadd4c75653fd9832)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb4e2e36870e97d9c5f88f0190291863a65a6351
Reviewed-on: http://review.coreboot.org/8142
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- SPD GPIO table was changed from earlier builds and GPIO67 needs to be
swapped with GPIO69
- Hynix 8GB DRAM is actually x16 and needs updated geometry in the SPD
- Broadwell LPDDR3 at 1333 is not working in P2, remove the workaround
- In order to support both P2A and P2B with one firmware image we need
to read the EC board version and use the right SPD GPIO for bit3
- Touchpad I2C address changed to 0x4a/0x26
BUG=chrome-os-partner:29502
BRANCH=None
TEST=boot on P2A and P2B boards
Original-Change-Id: I4af4161449d904b8dd69c1c4f984b2f41f0dbbbc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204818
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9cc71b68be556dab154fdf3f86914129e5f7a6dc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic5ca71dbfd9b9d413b86b2ae2786f39fd78ace1d
Reviewed-on: http://review.coreboot.org/8135
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a block in the SMI handler to call init functions for
drivers which may be used in SMM. A static variable is used to
ensure the init functions are only called once.
BUG=chrome-os-partner:29580
BRANCH=mccloud
TEST=Built and booted on mccloud, system no longer hangs when
pressing power button at the dev mode screen. Also tested on parrot.
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I225f572f7b3072bec2bc06aac3fb50d90a2e30ee
Original-Reviewed-on: https://chromium-review.googlesource.com/204764
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9315c485deb5f24df753e2d69f4819b2cb6accc2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8d2b21765c35c7ac7746986d5334dca17dcd6861
Reviewed-on: http://review.coreboot.org/8134
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable the ACPI Device for the EC ALS.
BUG=chrome-os-partner:24208
BRANCH=None
TEST=build and boot on samus, add acpi-als driver to the kernel
and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw
Original-Change-Id: I9e957464f835d5bd96d4806f896ac60db9dea5dc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203744
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a4f78b0b78c53bc0397d9a21dd8f3fa040f41616)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib83d6211d323770c9498180a7721d45e4aefca9d
Reviewed-on: http://review.coreboot.org/8133
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC can export ALS information if the sensor is attached
to it directly rather than to the host. This adds a basic
ACPI ALS device and implements the required information.
The kernel does not use the _ALR tuple set but it is required
by the ACPI spec so this just adds the sample two point
response curve defined in ACPI 5.0 section 9.2.5.
The EC does not currently send events for lux value changes so
a polling interval of 1 second is defined.
BUG=chrome-os-partner:24208
BRANCH=None
TEST=build and boot on samus, add acpi-als driver to the kernel
and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw
Original-Change-Id: Id29b72a68aa21c1a7c71d5f87223ac010cef0377
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203743
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 81f44b33b87a6ee3079b8ef6efffacd0eeb0283f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5a0ccd30e8b453675beaf7d0363dbfa162bd5b3f
Reviewed-on: http://review.coreboot.org/8132
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- RAM ID3 moved to GPIO65 to avoid Top Block Swap strap on GPIO66
- LTE_POWER_ON connection removed
BUG=chrome-os-partner:29502
BRANCH=None
TEST=none yet, preparing for new board
Original-Change-Id: I521fe963cbed57ef5f56cfb0e89aec50bfc48b21
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203186
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1eb65e058307a172f0af9c27d2d2d87d1b78c514)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibf16dcfd83242c487232f34a310c9f6b2cb69314
Reviewed-on: http://review.coreboot.org/8131
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current default memcpy first copies single bytes to align the
amount, then copies the rest as full words. In practice, the start of a
buffer is much more likely to be word-aligned then the end, and aligned
word access are usually more efficient. This patch reorders those
accesses to first copy as many full words as possible and then finish
the rest with byte accesses to optimize this common case.
This fixes a data abort when using USB on ARM without CONFIG_GPL. Due to
some limitations of how DMA memory is set up in coreboot on ARM, it
currently does not support unaligned accesses. (This could be fixed with
a more complicated patch, but it's usually not an issue... unless, of
course, your memcpy happens to be braindead).
Also add word-aligned accesses to memset and memcmp while I'm at it, and
make memcmp's return value standard's compliant.
BUG=chrome-os-partner:24957
TEST=Manual
Original-Change-Id: I2a7bcb35626a05a9a43fcfd99eb958b485d7622a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203547
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 05a64d2e107e1675cc3442e6dabe14a341e55673)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0030ca8a203c97587b0da31a0a5e9e11b0be050f
Reviewed-on: http://review.coreboot.org/8126
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add stub implementation for gdb arm64 support. Currently all functions are kept
empty to enable proper compilation of depthcharge and libpayload. As we get more
clear about context management and stuff, we can add details for gdb as well.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0a8729671ab0764d424c0e3d50af86433d05b1e8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204877
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d24e5c26b56a9882b3450b1e4988b56c3d73efd1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9b7d3d7060dd827ef4a46865e0f9a2b4e063d07d
Reviewed-on: http://review.coreboot.org/8125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I2569cadf2d34f7211892f100ba715486d824b921
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204611
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit dd9e06e41da043a48b469a011c010a10a1a3b25a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I37fbc8cfea0870e7167ffa47dd63fc548e18c82e
Reviewed-on: http://review.coreboot.org/8124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix baseaddr typecast to allow use in 32- and 64-bit systems
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: Ie5ded744d75a0ae4d1428d04ff2478bdfe54d146
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204424
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit b56814fe5fc7d3a2fdfb324d4baafb27a9d3ffd6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icedc1c819e39b92a0dd92e98f848e15b3039dfbe
Reviewed-on: http://review.coreboot.org/8123
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Correct function names to make them consistent with depthcharge calling
convention
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0fd8f7f929c3fe268710362d1fc19f9e15c4a23b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 36008e728b840d85bb98225c7bb1420b993181de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4b446da8f2c273385ee885c4870966e18ba2a7a6
Reviewed-on: http://review.coreboot.org/8122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is required for proper compilation of libpayload and depthcharge
BUG=None
BRANCH=None
TEST=libpayload compiles successfully for rush
Original-Change-Id: I305b58b978fd335e20abd7664c3ee2a6c1ea8384
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204422
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit eef115c2371c6f7259bf808e0448f24a5b3491ab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icd6a5b8a0bdb125de4913fc82be8cb2a5aef5dc9
Reviewed-on: http://review.coreboot.org/8120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds the ability to attach a GDB host through the UART to a
running payload. Libpayload implements a small stub that can parse and
respond to the GDB remote protocol and provide the required primitives
(reading/writing registers/memory, etc.) to allow GDB to control
execution.
The goal of this implementation is to be as small and uninvasive as
possible. It implements only the minimum amount of primitives required,
and relies on GDB's impressive workaround capabilities (such as
emulating breakpoints by temporarily replacing instructions) for the
more complicated features. This way, a relatively tiny amount of code on
the firmware side opens a vast range of capabilities to the user, not
just in debugging but also in remote-controlling the firmware to change
its behavior (e.g. through GDBs ability to modify variables and call
functions).
By default, a system with the REMOTEGDB Kconfig will only trap into GDB
when executing halt() (including the calls from die_if(), assert(), and
exception handlers). In addition, payloads can manually call gdb_enter()
if desired. It will print a final "Ready for GDB connection." on the
serial, detach the normal serial output driver and wait for the commands
that GDB starts sending on attach.
Based on original implementation by Gabe Black <gabeblack@chromium.org>.
BUG=chrome-os-partner:18390
TEST=Boot a GDB enabled image in recovery mode (or get it to hit a
halt()), close your terminal, execute '<toolchain>-gdb --symbols
/build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory
~/trunk/src/third_party/coreboot/payloads/libpayload --directory
~/trunk/src/platform/depthcharge --directory
~/trunk/src/platform/vboot_reference --ex "target remote
<cpu_uart_pty>"' and behold the magic.
(You can also SIGSTOP your terminal's parent shell and the terminal
itself, and SIGCONT them in reverse order after GDB exits. More
convenient wrapper tools to do all this automatically coming soon.)
Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202563
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b
Reviewed-on: http://review.coreboot.org/8119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There have been leaks of GPL code into libpayload for a while now, for
new features or improvements that require third party code with no
adequate alternative among BSD-licensed software. It seems silly and
counter-productive to keep holding back features and performance
improvements from libpayload for a use-case (proprietary payloads) that
doesn't even seem to be implemented anywhere to date. Open-source
payloads should not need to suffer to appease commercial ones.
Instead, this patch introduces a new Kconfig option to explicitly allow
inclusion of GPL code. It will use Kconfig dependencies and/or Makefile
rules to ensure that no GPL code can end up in the final payload if that
option is unset, allowing proprietary payloads to keep working with the
existing BSD-licensed feature set. New features and patches (that are
sufficiently separate and self-contained to allow guarding through this
config option) can choose whether to import GPL code, and need to depend
on this option if they do.
Also clean up all (known) existing uses of GPL code to depend on the new
option, add some recent third-party imports to the LICENSES file, and
relicense the selfboot.c files to BSD with permission of the author.
BUG=chrome-os-partner:24957
TEST=Compiled Falco and Nyan_Big both with and without the new option,
disassembled output binaries to ensure that memcpy() looks as expected.
Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203513
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I446fef028264c793b946dd9f765e446bf708b4db
Reviewed-on: http://review.coreboot.org/8118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch makes some slight changes to the exception hook interface.
The old code provides a different handler hook for every exception
type... however, in practice all those hook functions often need to look
very similar, so this creates more boilerplate than it removes. The new
interface just allows for a single hook with the exception type passed
as an argument, and the consumer can signal whether the exception was
handled through the return value. (Right now this still only supports
one consumer, but it could easily be extended to walk through a list of
hooks if the need arises.)
Also move the excepton state from an argument to a global. This avoids a
lot of boilerplate since some consumers need to change the state from
many places, so they would have to pass the same pointer around many
times. It also removes the false suggestion that the exception state was
not global and you could have multiple copies of it (which the exception
core doesn't support for any architecture).
On the ARM side, the exception state is separated from the exception
stack for easier access. (This requires some assembly changes, and I
threw in a few comments and corrected the immediate sigils from '$' to
the official '#' while I'm there.) Since the exception state is now both
stored and loaded through an indirection pointer, this allows for some
very limited reentrance (you could point it to a different struct while
handling an exception, and while you still won't be able to return to
the outer-level exception from there, you could at least swap out the
pointer and return back to System Mode in one go).
BUG=chrome-os-partner:18390
TEST=Made sure normal exceptions still get dumped correctly on both
archs.
Original-Change-Id: I5d9a934fab7c14ccb2c9d7ee4b3465c825521fa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202562
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 97542110f0b385b9b8d89675866e65db8ca32aeb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
*** Squashed to prevent build failures. ***
libpayload: align arm64 with new exception handling model
The exception handling was previously updated, however the
arm64 changes raced with hat one. Make the arm64 align with
the new model. Without these changes compilation will fail.
BUG=None
BRANCH=None
TEST=Can build libpayload for rush.
Original-Change-Id: I320b39a57b985d1f87446ea7757955664f8dba8f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204402
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0080df41b311ef20f9214b386fa4e38ee54aa1a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9a0bb3848cf5286f9f4bb08172a9f4a15278348e
Reviewed-on: http://review.coreboot.org/8117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds a console_kill_output_driver() function, which can
remove a previously registered output driver. This is mostly useful when
you overlay some output channel over another, such as when the GDB stub
takes direct control of the UART (and thus has to get rid of the
existing serial output driver).
BUG=chrome-os-partner:18390
TEST=None
Original-Change-Id: I6fce95c22fd15cd321ca6b2d6fbc4e3902b1eac3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202561
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 87680a246429d24e99b7b477b743c357f73b752c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I50001cee4582c962ceedc215d59238867a6ae95a
Reviewed-on: http://review.coreboot.org/8116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Basic support for arm64 is enabled in libpayload.
Features added:
1) mem* operations in assembly.
2) Basic exception handling and support for testing exceptions.
3) Caching support.
Tested with arm64-generic board compilation.
BUG=None
BRANCH=None
TEST=Compilation successful
Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/187067
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251
Reviewed-on: http://review.coreboot.org/8063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This marks the bottom chunk of memory, which is used by various IP
blocks, as reserved so that Depthcharge does not attempt to wipe it.
BUG=chrome-os-partner:30067
BRANCH=storm
TEST=Built and booted for storm, depthcharge shows:
Wipe memory regions:
[0x00000041500000, 0x00000051000000)
[0x000000510006a0, 0x00000053000000)
[0x00000054141260, 0x0000007fffd000)
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8f782f16d13620b705e1b3fbeca21dc8705b7e77
Original-Reviewed-on: https://chromium-review.googlesource.com/206516
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit f66f553f1594c481a74b7f40b4b1088600b1a70a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I82d118abc86052f5e32f6195a4efd04fe315be5a
Reviewed-on: http://review.coreboot.org/8149
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:29871
BRANCH=storm
TEST=builds and boots (sort of)
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I82e1792152d17d689e129c9941e8972221bde366
Original-Reviewed-on: https://chromium-review.googlesource.com/206011
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8995fde9bdfb8af8fb86525fd67a61614881f78e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ice4a5382903b0ab6e085c39d05c46601373080eb
Reviewed-on: http://review.coreboot.org/8148
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The actual storm device has a single USB interface, which needs to be
explicitly turned on using GPIO51.
BUG=chrome-os-partner:29871
TEST=verified that depthcharge finds and boots a kernel from USB stick
Original-Change-Id: Iaf868812c96e1e3289b9403855c4cc8f87c1e368
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205329
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit aa22376ffac22309a298dfa844e7f61c97d57d3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0f34622e61a65a0540c0f3fca26fb057fa85fb7
Reviewed-on: http://review.coreboot.org/8147
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Storm devices use more recent Spansion flash, add its description to
the table of supported devices.
BUG=chrome-os-partner:29871
TEST=the updated firmware boots all the way to depthcharge
Original-Change-Id: I81661c01ae679d49918e40d940b8d348f3081f9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205182
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit ea7bb1cf65b7130164b869fef09c55138100206b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e0136a5c575951b4e464aab0f380f19e886a84f
Reviewed-on: http://review.coreboot.org/8146
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*.
Back in the day, like more than half a decade ago, we migrated a lot
of boards to printk, but we never cleaned up the existing code to be
consistent. Instead, we worked around the problem with a very messy
console.h (nowadays the mess is hidden in romstage_console.c and
early_print.h)
This patch cleans up the generic code pieces to use printk() on all
non-ROMCC boards.
Our two remaining ROMCC boards are fixed up in this commit:
bifferos/bifferboard and dmp/vortex86ex.
Change-Id: I16676eeabe5c892c8e3c9f3c0cd3bae2e8fd74b6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8115
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove @param command for #define - this isn't valid.
- Rename duplicate @section names - All of the renamed @sections
have other @section names in the same file.
- Remove blank @brief and @param commands - Doxygen seems to REALLY
dislike this...
- Add a missing @param name.
Change-Id: Iba99ec68b37bbb5c375b7256363d16228031d771
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8175
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Join doxygen file command with the file description
- Give extended file location so doxygen knows which early_sbmus.h
the file is. (I don't get this either, but it fixes the warning)
Change-Id: Ia91fb1ac1e9687e1a5a5cb5234696b3c24d4cd24
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8174
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Take unused reverse eng function out of build by wrapping in #if 0.
Change-Id: I816b3ea08a8858fc03e4455c1d7711265e63cba4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8167
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Remove 'read_mchbar8_bypass()' as 'read_mchbar8()' does the same
thing and 'read_mchbar8_bypass()' is unused.
Change-Id: I0dc2325e6205c38b63e5200c408ece65e4f938dc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8166
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This convenience API was never used.
Change-Id: If2a99967e7f8c02e9029f7766aeef1e1a1f3dd16
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8108
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ide09e129fd9400eb20f9b7bb3cd0e5d6d271e372
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8176
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Missing base may have enabled SMI for all GPI inputs.
Change-Id: I1157afaccccb17d325a4efdb1f270a27f9a299ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8169
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- @todo has to be lowercase for doxygen
- Fix some parameters that had changed in the code.
- The @file entries needed to be more specific.
Change-Id: Icdce08735f581609cd25cce41e986c71435368a4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8154
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This is a doxygen target I'm using for cleaning up the coreboot doxygen
output. It runs in about a minute instead of.... a lot longer, and
only generates documentation for the coreboot/src directory, excluding
vendorcode.
It was requested that the comments be stripped to make it easier to
read. This was done through the following command (split for gerrit):
head -n 1 Doxyfile.coreboot_simple > Doxyfile.tmp ;
cat Doxyfile.coreboot_simple | sed 's|^\s*#.*$||' | sed '/^$/d' | sed 's|[[:space:]]\+$||' >> Doxyfile.tmp ;
mv Doxyfile.tmp Doxyfile.coreboot_simple
I'm including the command here because any time the file is updated
with the doxygen wizard, it will need to be run again. It might be
desirable to turn this into a script in the documentation directory.
Change-Id: Ic0cbbcd21aa647e80a037481546bdcd2aab8949e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8068
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
- Add missing parameter names in several files
- remove parameter types in several files
- remove lines from doxygen documentation. These should be outside the
doxygen comments.
- Some of the comments shouldn't have been doxygen style. Turn these
into regular non-doxygen comments.
Change-Id: Ieccfe237385efee007b48308d58eb0a6a12f5bfa
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8153
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3bb5dc23885af8c992456ee5e4bd374cd4b813bf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8049
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove useless comment pretaining to abusing pragma's for old
GCC/GDB interaction issues.
Change-Id: Ic83a0285ac947a23699a81a82b89de08a47ab052
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8017
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This file will have CBMEM init hooks API one day.
Change-Id: I0c31495d4217a5eb235b13e6d8e8c99a87a3b840
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8031
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the mainboard code to use printk() on all non-ROMCC
boards.
Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8111
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
