summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-25Declare acpi_is_wakeup_early() only onceKyösti Mälkki
Change-Id: I5314d76168c40a6327d4a9ac3b4f4fb05497d6fc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4525 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-25i945 boards: Drop disabled ram_check() callsKyösti Mälkki
This code would not get enabled just by flipping the options in menuconfig, also ramcheck() no longer test the range like the parameters would imply. We should add non-destructive ram_check() on S3 resume path to verify memory controller configuration has been properly recovered. Change-Id: Ie4675c4770146c4312cdfbc81afa19f243f90ee4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6027 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-24MP Table: Change types to be consistent with the specMike Loptien
Update the elements in the MP Spec structures with appropriate types to more accurately reflect the real sizes of the bit fields in the MP Tables. Also add a function for PCI I/O interrupts since these are handled slightly differently than the other I/O interrupt entries. The src_bus_irq field is defined where Bits 1-0: PIRQ pin: INT_A# = 0, INT_B# = 1, INT_C# = 2, INT_D# = 3 Bits 2-6: Originating PCI Device Number Bit 7: Reserved Change-Id: I693407beaa0ee454f49464e43ed45d8cba3b18fc Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/6050 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-23baytrail_fsp: Fix the mmconf KconfigMartin Roth
The override value in the mainboard that was removed was correct. Change-Id: Ie820df0d6b7a713488173240f0c0ca4a9e108f71 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6095 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-06-23fsp_baytrail: Minor Kconfig updatesMartin Roth
- remove the Kconfig text when setting the default for the FSP location. The text was showing up twice in the config menu. - Remove an extra 'the' in the help text. Change-Id: I3777833bf32e19bbe5a8493578a9346d6ab062a4 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6090 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-23bayleybay_fsp: Add comments for the MMC/SD devices in devicetreeMartin Roth
This just adds some additional comments for the EMMC / SD / SDIO PCI devices in devicetree. The documentation states that the EMMC 4.1 device shouldn't be used, but it's available to enable in the FSP. Because it can be enabled, I've included it in the devicetree even though its use is discouraged. Change-Id: I64633fe1908368f69a8d4031aa900b0bceb2189e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6089 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21Remove guarding #includes by CONFIG_FOO combinationsEdward O'Callaghan
First of many to remove guarding the inclusion of headers based on CONFIG_ options. This *potentially* could hide issues such as functions being swapped from under our feet, since different runtime behaviour could be declared with the function same name and type-signature. Hence, depending on the header we happen to get may change runtime behaviour. Change-Id: Ife56801c783c44e1882abef711e09b85b7f295a4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6055 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21cpu/amd/agesa: Use acpi_is_wakeup()Kyösti Mälkki
Change test to return true on S2 wakeup too. In S2 CPU would have been powered down so MTRR recovery is required. Change-Id: I6ad5fb7e32c59be7d84f28461c238c3975e1e04e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6078 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21AMD cimx/sb800: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: If237c2fcd52f50d5fa0cad5a02a941386b085f2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6077 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21northbridge/amd/agesa: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Ia6f5b0454e7fbbf36baa2372dfeec51b5f5e8f67 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6076 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21PCI VGA ROM: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I6f9c992f1a68025ed18de57c5856b3bf9a673bfb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6075 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21PC80 RTC: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Idc4c47f3802019c2853ec71f8e9c057c3ab8d3ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6074 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21PS2 keyboard: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I812cc40e50a1e7e13caed48a1693feb8658b645c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6073 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21Misc: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I46906e6d68775edc5cfe199cfeb465db4da2691f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6072 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Icab0aeb2d5bf19b4029ca29b8a1e7564ef59a538 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6071 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21superio/smsc/fdc37n972: Trivial cleanup reorder headersEdward O'Callaghan
Alphabetise headers and a few trivial cleanups. Change-Id: Ib8c8362962297cb59671d8274df8e4945373f94b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6042 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-06-20superio/nuvoton: Add chip support for setting IRQs to edge/levelDave Frodin
Change-Id: I08b9eef9d6b0f120c17c3293f1f90b847742dc06 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/6064 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-20superio/nuvoton: Adds a function to route pins 41-48 to UARTDDave Frodin
Pins 41-48 default to being GPIs. This switches the internal mux to connect them to UARTD. Change-Id: I61393b8c35cbc664f6520f60eed09ba4bbede0dc Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-20southbridge/intel/lynxpoint/me_9.x.c: Use IS_ENABLED macroEdward O'Callaghan
Silence unused function warnings, spotted by Clang. Change-Id: I5127893e9605ca490ff450faa92af5e9eafe8940 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6054 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-06-20superio/ite/it8772f: Remove prototypes for func with no bodyEdward O'Callaghan
Change-Id: Iaf5db7153b08ac81b233f967c7a604ed08af91ca Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6040 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-06-20src/mainboard/google/*/mainboard_smi.c: Remove #include .c'sEdward O'Callaghan
No need for these. Change-Id: I1df6e2ef06bd5546a66ee05a15fa2f7c3daf8853 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6039 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-06-20google/link, lenovo/x60: i915io.c: Use define `ARRAY_SIZE`Paul Menzel
Change-Id: I8ddd46a573b61eba685efcc15456f288645d214d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5936 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-20mainboard/jetway/nf81-t56n-lf: Port recent Persimmon changesEdward O'Callaghan
Port to recent reference board (AMD Persimmon) changes in commits: c93a75a AMD/CIMx: Add functions for AMD PCI IRQ routing Change-Id: I307709bfee554bc64788a973da6d9313ca7c0de2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5882 Tested-by: build bot (Jenkins) Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
2014-06-20ACPI: Add acpi_is_wakeup_s3()Kyösti Mälkki
Test explicitly for S3 resume. Also switch to use IS_ENABLED(). Change-Id: I17ea729f51f99ea8d6135f2c7a807623f1286238 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6070 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-20sandy/ivy boards: Use acpi_s3_resume_allowed()Kyösti Mälkki
Change-Id: I8e0d43293e095c1c76c3cfef1f426737624ea37f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6063 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-20nehalem boards: Use acpi_s3_resume_allowed()Kyösti Mälkki
Also update packardbell/ms2290 to match lenovo/x201. Change-Id: I6bda740cadd81ebe47e57742c507bff322a9fb0e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6062 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-20intel/i945 gm45: Use acpi_s3_resume_allowed()Kyösti Mälkki
Change-Id: I7811ee695f35c708144c4af5d43935deb22dd4df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6061 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-20ACPI S3 support: Add acpi_s3_resume_allowed()Kyösti Mälkki
Add this to reduce the amount of preprocessor conditionals used in the source, compiler currently resolves this to a constant. Once we have gone through all #if CONFIG_HAVE_ACPI_RESUME cases, we may change the implementation to enable/disable S3 support runtime. Change-Id: I0e2d9f81e2ab87c2376a04fab38a7c951cac7a07 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6060 Tested-by: build bot (Jenkins)
2014-06-20util/cbmem: Workaround for IS_ENABLED()Kyösti Mälkki
Our include files reference CONFIG_xxx declarations, which we should ignore for utility build. We cannot include kconfig.h to get IS_ENABLED() as that file would require build/config.h and we do not want to enforce a build of the firmware to be able to build the utility. Since we do not include build/config.h each occurence of CONFIG_xxx in the included header files is undefined and will be treated as disabled. Change-Id: I74f1627fc3f294410db8ce486ab553dac9e967f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6066 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-20src/lib/clog2.c: Fix style and clarity, remove some cruftEdward O'Callaghan
Change-Id: I6b37cf945db12d2cf8096c9f49fff9e0bec139d6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6058 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-20drivers/intel/gma: Equality comparison with extraneous parenthesesEdward O'Callaghan
Spotted by Clang. Change-Id: I3e612c0fa050a09fa7e5b1cb643935b84eb2b957 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6053 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-19supermicro/h8scm: Fix KconfigKyösti Mälkki
Change-Id: I0ecc3c5a26251f248234244bf305d3e13e41b9e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6069 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-18intel/bayleybay_fsp: Drop redundant EARLY_CBMEM_INITKyösti Mälkki
This is implied from DYNAMIC_CBMEM from soc/. Change-Id: I8cd8c2dff723950377998750377a3168f1f5fc5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6029 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-18fsp_baytrail: Add the default FSP locationMartin Roth
The default FSP location needs to be in the chipset, not the mainboard. This was removed from the Bayley Bay mainboard in patch 41ea7230f7 reviewed at http://review.coreboot.org/#/c/5982/ Change-Id: Ia26ed34e1401cbd2303166628e7a4e357d79c874 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5985 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2014-06-18fsp_baytrail: Add Baytrail B0/B1 "Super SKU" microcodeMartin Roth
- Add the Bay Trail B0/B1 microcode. These versions of the SOC were released as a "Super SKU" which had features of all the different SKUS (M/D/T/I), and identified as a Bay Trail T as noted by the number 2 in the third character from the left in the microcode name. - Update the size of the microcode blob. We should be pushing a patch to eliminate the need for this shortly. Change-Id: I57ba51eabe9ea0609ab809f18b95e3bc9d5cb191 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5986 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-06-18mainboard: Clear up remaining SIO_PORT from KconfigEdward O'Callaghan
Push back any board specific values back into romstage.c #defines and drop any remaining fragments of CONFIG_SIO_PORT in-tree. Change-Id: Ieb63fb0c2ab1a82b53bafd86686de7b21ac226c3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6045 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-18mainboard/amd,lippert: Drop SIO_PORT from KconfigEdward O'Callaghan
CONFIG_SIO_PORT is not used anywhere and should not be here any way. Change-Id: I39eb2d668f1da9f89b7ff6eb219af1a48cb29232 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6044 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-18mainboard/jetway/nf81-t56n-lf: Drop SIO_PORT from KconfigEdward O'Callaghan
CONFIG_SIO_PORT is not used anywhere and should not be here any way. Change-Id: I2e7be4337f7f46298b9ca5bd613c58deec2cb01a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6043 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM. Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6032 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-18northbridge/intel: Drop use of set_top_of_ram()Kyösti Mälkki
We implement get_top_of_ram() on these chipset to resolve CBMEM location early in romstage. Call to set_top_ram() is not required. Change-Id: I492e436b0c32d2c24677265b35afd05f29dcd0f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6031 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-18intel/nehalem: Add get_top_top_ram() in ramstageKyösti Mälkki
Needed to resolve CBMEM location early in ramstage. With DYNAMIC_CBMEM set_top_of_ram() will no longer be available. Change-Id: If50f1c5455a587b096348ffedadbe1dd2350a714 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6030 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-18emulation/x86 : Drop HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume detection not implemented in romstage.c. Change-Id: I98277cb483825af2e6c5c8eefa4598b117613478 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6028 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-18mainboard/supermicro/h8dme: Drop unused codeKyösti Mälkki
Clang complains about a unused debug function, so remove dead code. We have copy of dump_smbus_registers() in amdk8/debug.c. Change-Id: Ibf46deb1de1589d81760841b1d4ba319707915aa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5942 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-18lenovo/x60: Fix build issue with DO_NATIVE_VGA_INITKyösti Mälkki
Use the value from hardware for uma_memory_base. Change-Id: I70351166db6634ef3bca2bf12051ccc3730cab8e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-17intel/model_2065x: Add 20652 microcode.Vladimir Serbinenko
Change-Id: I2a46806a3f0a57497edebd49e69b97f90948adb9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5117 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-16Persimmon: Change MPTable to use mainboard IRQ routingMike Loptien
With the addition of the mainboard PCI IRQ routing tables for AMD Persimmon, the MPTables can be set to use this information to accurately reflect the real hardware settings of the system. Additionally, the IOAPIC gets defined before the MPTable gets generated so the settings can be read directly from the IOAPIC registers instead of 'guessing' at them as was done before. Change-Id: I96ec046a2208eddf4b5e442214ff43d2a349ca4d Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5878 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-16MP Spec: Correct the Virtual Wire assignmentMike Loptien
Virtual Wire mode is set by writing 0 to the the MPTable Feature2 bit field 'IMCR'. The virtualwire variable was initially defined as writing a 1 to this bit field which would actually set PIC mode instead of Virtual Wire mode. However, nearly every mainboard called the MPTables with virtualwire = 0, which actually had the effect of setting Virtual Wire mode. I am correcting the definition but leaving the call to write the MPTables with virtualwire = 0, which is how most mainboards are already setting the tables up. See the MP Spec table 4-1 for more details: Bit 7: IMCRP. When the IMCR presence bit is set, the IMCR is present and PIC Mode is implemented; otherwise, Virtual Wire Mode is implemented. http://download.intel.com/design/archives/processors/pro/docs/24201606.pdf Change-Id: I039d88134aabd55166c2b68aa842bacbfcc0f42b Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5977 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-16MP Spec: Add copyright headerMike Loptien
Adding the copyright header to the MP Spec files because they were not included before. Change-Id: Ifcd217a53bf8df19b28e251a7cac8b92be68d1fc Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5981 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-14amd/agesa/f15tn: Invalid inline asm in gcc-intrin.hEdward O'Callaghan
Forward port commit: db0e0e2 amd/agesa/*/gcc-intrin.h: Invaild inline asm Change-Id: I87bf101b15bac7c06afa9cec10e2bd4e0cdfd6c7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5941 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-14mainboard/ibase/mb899: Break out superio hwm conf from mainboardEdward O'Callaghan
Break out the PNP Super I/O HWM configuration from mainboard.c Change-Id: Ib4c7f26c7fa2a9845250a61a23c75cb9e440ab93 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5797 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-14amd/agesa/f14: Backport f15tn fixes from DDR3 in mtspd3.cEdward O'Callaghan
Change-Id: I710efc3171e1653241f2dba1217a9560d2d99a16 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5802 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-14mainboard/amd: De-ASCIIartify reference boardsEdward O'Callaghan
For anyone who knows the difference between a header and a variable in C these depictions are rather useless. Thus, these lines wast essential screen real estate while working on coreboot. Change-Id: I7fe55d936c035ef83832716c45bfc57d73c0edc7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5979 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-13fsp_baytrail: remove version from default vbios pathMartin Roth
Intel requested that we remove the version number from the default vbios path. Change-Id: I2590fed0db157e3e430212336fc55eb099d28a72 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-13fsp_baytrail: Fix CONFIG_ENABLE_FSP_FAST_BOOTMartin Roth
While pushing the fsp_baytrail code, it was requested that we change CONFIG_ENABLE_FAST_BOOT to CONFIG_ENABLE_FSP_FAST_BOOT. These were missed in the change. Change-Id: If8af3f90b0f5cc9154ff1d3a387f442430f42dee Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5972 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-13mainboard.c: Fix typo in appro*p*riate in commentPaul Menzel
Use the following command to fix all occurences. $ git grep -l approriate | xargs sed -i 's/approriate/appropriate/g' Change-Id: I4cbba972bb445c2407ef2e63ffb3068fc948f1c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5987 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-12southbridge/amd: Change #if defined to #if IS_ENABLEDDave Frodin
The IMC functions were being called and timing out when the CONFIG_SB800_IMC_FWM/CONFIG_HUDSON_IMC_FWM were defined as 0. Changing to a IS_ENABLED will keep the IMC handshake from occuring if the IMC firmware isn't running. Tested on a Persimmon platform which makes three calls to spi_claim_bus() with each call timing out after 500ms. Change-Id: I5d4bbcecf003b93704553b495a16bcd15f66763b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5974 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-12bayleybay_fsp Kconfig: Remove unnecessary overridesMartin Roth
Use the default mmconf base address and fsp locations. Change-Id: Ia9116b0f0fc799592df2a10b10e086cfc88b394c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5982 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-12superio/smscsuperio: Fix chip detectionKyösti Mälkki
There was dereference of NULL dev->ops in pnp_enter/exit_conf_mode() as those calls were made before pnp_enable_devices() was run. Since hardware did not enter configuration mode, detection failed with ID and REV read as 0xff. Change-Id: If13086707cd86e392890ccf4f717e13a87f3317f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5949 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-06-12intel/bd82x6x: Skip unknown MBP.Vladimir Serbinenko
Allow skipping unknown MBP rather than bailing out. Change-Id: I9a54858c37d73e320de77aea5a05ab5dcf67cd69 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5976 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-11device/device_util.c: Fix wording in comment of `new_resource()`Paul Menzel
Change-Id: Ieb0d5de37870a359f3a7ea1543640e26f86c1684 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5952 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11amd/southbridge/lpc: SPI BAR has fixed size/locationDave Frodin
The CIMX sb700/sb800/sb900 and agesa/hudson code was treating the LPC SPI BAR as a normal PCI BAR. This will set the resources for a fixed size at a fixed address. This was tested on hp/abm, amd/persimmon, and gizmosphere/gizmo boards. Change-Id: I1367efe0bbb53b7727258585963f61f4bd02ea1d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5947 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11ibexpeak: Set number of USB ports.Vladimir Serbinenko
Change-Id: Ife3febcc88967386dfae624cd237562a34a68471 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5956 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11ibexpeak: Remove some dead code.Vladimir Serbinenko
Change-Id: I68ae49d20a2524f03c4503f2b3be93f07b9cb6e3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5955 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11AMD/CIMx: Add functions for AMD PCI IRQ routingMike Loptien
The PCI_INTR table is an Index/Data pair of I/O ports 0xC00 and 0xC01. This table is responsible for physically routing IRQs to the PIC and IOAPIC. The settings given in this table are chipset and mainboard dependent, so the table values will reside in the mainboard.c file. This allows for a system to uniquely set its IRQ routing. The function to write the PCI_INTR table resides in cimx_util.c because the indices into the table have the same definitions for all SBx00 FCH chipsets. The next piece is a function that will read the PCI_INTR table and program the INT_LINE and INT_PIN registers in PCI config space appropriately. This function will read a devices' INT_PIN register, which is always hardcoded to a value if it uses hardware interrupts. It then uses this value, along with the device and function numbers to determine an index into the PCI_INTR table. It will read the table and program the corresponding value into the PCI config space register 0x3C, INT_LINE. Finally, it will set this IRQ number to LEVEL_TRIGGERED on the PIC because it is a PCI device interrupt and the must be level triggered. For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN value hardcoded to 2. This corresponds to PIN B. On the Persimmon mainboard, I want the USB device to use IRQ 11. I will program the PCI_INTR table at index 0x31 (this USB device index) to 11. This function will then read the INT_PIN register, read the PCI_INTR table, and then program the INT_LINE register with the value it read. It will then set the IRQ on the PIC to LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4. Also, the SB700 has slightly different register definitions than the newer SB800 and SB900 so it needs its own set of #defines for the pci_intr registers. Only the Persimmon mainboard is adapted to this change as an example for other mainboards. Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5877 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11PIC i8259: Move #defines and functions to i8259.hMike Loptien
The PIC i8259.c file has a lot of #defines and function definitions in it. I am moving these to the i8259.h file and also adding a few functions to update the PIC IRQ mask register. The PIC default configuration has all of its interrupts masked off except for IRQ2. IRQ2 is where the Slave PIC is cascaded from the Master PIC. Change-Id: I78d505358c29fadbc184137a09120863ea1d5c13 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5950 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11lippert/toucan-af: Fix comment on HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume is expected to work now, however the 3s delay and flash wear is still there. Change-Id: I7edbce7bcf9c2160099fd5e371562b1ec63d45d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5971 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11lippert/frontrunner-af: Fix comment on HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume now works, however the 3s delay and flash wear is still there. Change-Id: I9d2eda5454baf7704807cf67f3aca94a67de3406 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5970 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
2014-06-11amd/hudson: Add the IOAPIC space to the fixed resources tableDave Frodin
Without this change the IOAPIC memory window would collide with PCI config space. This was tested on the hp/abm board. Change-Id: I5dd53463961f75bab80a41dc7beff8d0434b24ae Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5946 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11amd/family16kb: Move and resize the MMIO regionDave Frodin
The Kabini MMIO region was assigned a 256MB region at 0xA0000000. That location is below TOP_MEM and is getting carved out of useable system memory which is not being reclaimed above 4GB. This changes its size to 64MB and moves it to 0xF8000000. This was tested on the hp/abm and asrock/imb-a180 boards. Change-Id: Ib226bc954311a3a2a15f182ab4618f4924e95a5b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5945 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11util/inteltool: Add pci ids for 4 northbridge models instead of 1.Damien Zammit
This patch supports northbridges: 0x0150 0x0154 0x0158 0x015c as 3rd gen core. Tested on 0x0150 (0x0154 previously only model). Change-Id: I53a33d864494dd4ac1cb9e8330450f56001ed92c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/5873 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-09nuvoton/nct5104d: Update the #defined LDNsDave Frodin
Change-Id: I4e4bc09a8f8fabe68519a29dc421af82c76c9873 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5944 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06superio/nuvoton: factor out generic romstage componentsFelix Held
The romstage of Nuvoton Super I/O chips (but not Nuvoton BMC chips) is identical, so the early_serial.c file can be moved under nuvoton/common. The Nuvoton BMC chip WPCM450 is however left untouched. Change-Id: I4663176c1003b24a49a9fe5f9ebd27a1963b5565 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/5909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA: Use common GetBiosCallout()Kyösti Mälkki
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA fam15tn fam16kb: Use shared default calloutsKyösti Mälkki
Change-Id: Ibbb07ef308c7e92a8a8dfe066f5e3866d5f8aee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5687 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA fam15tn fam16kb: Use common handler for GNB_GFX_GET_VBIOS_IMAGEKyösti Mälkki
Change-Id: I158993bcb654ef27a9fc6b7e9dc3fc955fb740fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5686 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06Drop unused change_i2c_mux()Kyösti Mälkki
Change-Id: I3ac39441746d739ac19e831bb67c76405c24ba27 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5925 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-06superio/smsc/kbc1100: Virtually rewrite support and fix mainboardsEdward O'Callaghan
1. Remove #include .c in romstage. 2. Make romstage component symbols linker-time. 3. Provide header guards and prototypes in superio romstage support. 4. Correct function type-signatures to be static/non-static where appropriate, avoid 'pretend optimisations' by unnecessarily inlining functions. 5. Separate out UART enable from various other PNP hard coding Change-Id: I9b8dad7c02d802e97db73ddf2913d5c6bb33a419 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5916 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06build: Drop libgcc runtime wrapper in Clang buildsEdward O'Callaghan
This GCC specific workaround of wrapping of libgcc runtime symbols with gcc.c is not nessary with libcompiler-rt linkage. Change-Id: I50a2bc99d97f68a2ad2b51a92ea0e7086bab35fe Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5812 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/smsc/smscsuperio: Make romstage linkable with headerEdward O'Callaghan
Rewrite smsc/smscsuperio romstage component to be more consistent and provide header there-by removing #include's of early_serial.c's in mainboard's. Change-Id: I572e0c76422f09d4de88935a36c0a59e5350e6e0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5915 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8661f: Make early_serial into romstage symEdward O'Callaghan
Following similar reasoning as commit: d304331 superio/fintek/f81865f: Avoid .c includes Avoid any mistaken future inclusion of early_serial.c in mainboard.c code by providing symbols in romstage. Change-Id: I9e763a7ad9de090e35acdcf4d6a280d8227c6015 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5508 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03mainboard: Remove #include early_serial.c from w83977tf boardsEdward O'Callaghan
These non-ROMCC boards #include the model specific w83977tf Super I/O romstage component. The generic winbond_early_serial() function serves well here to further tighten integration into the new Super I/O framework and drop dependence on #include'ing .c files, leaving only ROMCC boards. Change-Id: Ib63c0f29f994c54e6112702506f288535799706c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5898 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8772f: Depreciate early wdt functionsEdward O'Callaghan
We have better written generic implementations of these functions introduced in commit: a7d14a1 ite/common: Introduce common watchdog and 3.3V VSB helpers Change-Id: Ic93d78fce18c68d1d1bf3b537e8985a2532a8fcf Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5901 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8772f: Move towards removing #include .cEdward O'Callaghan
Move samsung/stumpy board towards generic romstage component and away from poorly written hard-coded model specific Super I/O component. This is an incremental step towards getting obj-level abstraction between board and Super I/O. Change-Id: I358c5abef85c2ffa1b7178025cde8834a35b0a51 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5899 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03northbridge/intel/i945/gma.c: Add and use defines for `GMADR` and `GTTADR`Paul Menzel
Change-Id: I0f39b35fbf8e053ba21454a2847d6bb3ac5d2e1c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5923 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03northbridge/intel/i945/i945.h: Move define `BSM` to section D2F0Paul Menzel
The Base of Stolen Memory (BSM) register belongs to device 2, function 0. Change-Id: I2381f87ffaccb2f8034c160fc30c1d92f8b19402 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5922 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-02sandybridge: Pass chip info to i915lightup.Vladimir Serbinenko
Change-Id: I280441aadb0575dc0b99584cdcd48cc76a0289a2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5284 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-02i945: Fix TSEG size allocation for get_top_of_ram()Kyösti Mälkki
Seems boards with i945 had TSEG disabled so this had gone unnoticed. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I6a00ea9121847ce2fede22538e1b53a870d761f1 Reviewed-on: http://review.coreboot.org/5892 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-02i945: Fix resource bases for UMA and TSEGKyösti Mälkki
TSEG appears in memory below graphics UMA region. Seems boards with i945 had TSEG disabled, so the incorrect order did not make a difference. Change-Id: Ie293aab17b60b5f06a871a773cd42577c7dc7c7b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5891 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-01mainboard/ibase/mb899: Trivial, Non-local header treated as localEdward O'Callaghan
Change-Id: I5cb496d0d582d3dc5c0c0635f632561f8a3dd853 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5897 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01northbridge/intel/i945/i945.h: Trivial, fixup header guardsEdward O'Callaghan
Change-Id: Iff15ab436e5b7b4e189c7341e7c508faaef07a3a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5896 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01lenovo/x201: Fix order of SPI init.Vladimir Serbinenko
The lock bit for UVSVC/LVSVC was set before both registers were programmed. Change-Id: I000440db5c8dd2f260ebc1b69108b75621faf7b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5167 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01lenovo/t60: Implement intel VGA callbacks.Vladimir Serbinenko
Without it option ROM run results in just a black screen. Change-Id: Id203f55ca0f02c290a3f40ac1ec7c5f23c5580bf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5344 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01lenovo: Make version look like something thinkpad_acpi would acceptVladimir Serbinenko
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. Not cleaned up as the idea of this patch seems to be met with resistance. Can make it Thinkpad-specific if the idea is accepted. Change-Id: I15e33e87e7a7f42d6a06f12fb39b5172153af8a1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4650 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01i915_reg: Declare LVDS register values.Vladimir Serbinenko
Change-Id: If8b3578c4fa31bf9f09c0053a5cac7ebc993b634 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5319 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01acpigen: Add acpigen_emit_eisaid.Vladimir Serbinenko
Change-Id: Ib92142a133445018cd152dabe299792ba5f36548 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5240 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31util/board_status/board_status.sh: Move `cbfs.txt` to results directoryPaul Menzel
Commit 40e936a1 [1] util/board_status/board_status.sh: Save ROM contents in `cbfs.txt` creates `cbfs.txt` in `${tmpdir}` but does not move it to the results directory `${tmpdir}/${results}`. So move it to the correct place. [1] http://review.coreboot.org/5867 Change-Id: Ibca691ccf72b56b6271a611d92deaed7d377773b Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5883 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-05-31superio/nsc/pc87309: Avoid .c includes in mainboardEdward O'Callaghan
Make superio romstage component link-time symbols. Change-Id: Icde27465a05946498ff7b8f1aaa7a9e8ba074272 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5880 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/winbond/w83627hf: Avoid .c includes in mainboardsEdward O'Callaghan
Move towards the removal of the superio model specific xxx_serial_enable implementation. Make remaining superio romstage parts link-time symbols and fix corresponding mainboards to match. The following mainboards remain unconverted as they are ROMCC: - mainboard/supermicro/x6dai_g - mainboard/supermicro/x6dhe_g - mainboard/supermicro/x6dhr_ig - mainboard/supermicro/x6dhr_ig2 and so block the final removal of w83627hf_serial_enable(). Special cases: - mainboard/supermicro/h8qme_fam10: Provide local pnp_ sio func Provide local superio pnp_ programming entry/exit functions as to avoid making superio implementation global symbols. Although this is not the proper/final solution, it does mitigate possible symbol collisions and allow for continued superio refactorisation. Change-Id: Iaefb25d77512503050cb38313ca90855ebb538ad Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5601 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 03:43:52 +0000