Age | Commit message (Collapse) | Author |
|
According to document number 338846 and 336062 this should be set to 46 bits.
Change-Id: I0bbe6c962ffc7d5dc722f1cacf55bc0d0615db59
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Without skipping of DRHD generation for non-PCIe stack, the OS
kernel detects incorrect DMAR table with following messages:
[ 0.561817] Your BIOS is broken; DMAR reported at address 0
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I098605daf12a264f390613581427ec722afcddaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Implement mt_fmeter_get_freq_khz() in MT8192 to measure frequency of
some pre-defined clocks by frequency meter.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: I75df0b040ed7ea73d25724a3c80040f4e731118f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45402
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If Cr50 is running old firmware version and hence does not ensure long
interrupt pulses, override the GPIO PM configuration.
BUG=None
TEST=Build and boot waddledee to OS. Ensure that any chip override
happens before FSP silicon parameter initialization. Ensure that the
suspend/resume sequence works fine. Ensure that the reboot sequence
works fine for 50 iterations.
Change-Id: I455c51d4a63b1b5edadbf00c786ce61b0ba1ff00
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices.
BUG=b:169245831
BRANCH=octopus
TEST=Ensure that ALS devices are disabled in ACPI tables.
Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The BIOS log was looking in the spd data for the part name, but part
names are stripped from generic SPDs. For these cases, a mainboard
can override the dram part number string, so the spd logging code
needs to check for an override string when logging the dram part
number.
Change print_spd_info() to use an override string if declared.
BUG=b:168724473
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer2 and verify that the BIOS log shows a part name when
logging SPD information:
SPD: module part number is K4U6E3S4AA-MGCL
I also modified volteer to not override the part name and verified
that this change did as expected and printed a blank string.
Change-Id: I91971e07c450492dbb0588abd1c3c692ee0d3bb0
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45459
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify mrc_cache_load current to return the size of the mrc_cache
entry so that caller will know what the actual size of the data
returned is. This is needed for ARM devices like trogdor, which need
to know the size of the training data when populating the QcLib
interface table.
BUG=b:150502246
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a
Change-Id: Ia314717ad2a7d5232b37a19951c1aecd7f843c27
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot Berknip w/ eMMC to OS.
BRANCH=zork
Change-Id: I5d55f55b8208b4dc3fbdc9d1ec6333f9e211e3fd
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45931
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current Ram_Id: 0011 MT40A1G16KNR-075-E never be built before.
Remove it and change use micron-MT40A1G16KD-062E-E for ram_id:0011.
BRANCH=zork
BUG=b:159316110
TEST=run gen_part_id then check the generated files.
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: I28fc39f17e06ecd39f6567613e6ff5919becb2fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45810
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot Ezkinil w/ eMMC to OS.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ida0bbf9bd772ab7d384d5d097fa3b02b846a3efa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45852
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot on morphius with and without patch, confirm ~7ms improvement
BRANCH=zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I7f6efd3d5839f154f2487a07654be8e35634bbbc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45932
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't want unnecessary die() calls to spread throughout coreboot.
Chances are high that we'd add a NON_FATAL_DIE Kconfig eventually.
Change-Id: I01c7efdf23672bad3a195b7dc1565a3cc8a087bd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46046
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update TSR1 passive trip temperature
BUG=b:169691800
BRANCH=None
TEST=Built and tested on dedede system
Change-Id: I172391daca981d5591fa9cc5eacad92521dd0dc5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
BUG=b:167472333
TEST=Build and boot dedede and observe the slope and offset values
getting updated in the fsp debug log
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I3ea32218040263f0abef9b9dd4c52efb16289fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45825
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL fixes the CPU Throttling issue.
BUG=b:167472333
TEST=Build and boot dedede and observe the slope and offset values
getting updated in the fsp debug log
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I3fa32218040263f0abef8b9dd4c52efb31289fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit 69589294c205b616e80cafbbfb0b33e105a75386.
No reason was given why this should deviate from the other platforms
and the author can't explain it.
Change-Id: I2e8d6f9bd4ebba69b6f7cdd9a1c5d08aaf2e798f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib329648f77acecccb0ced1806f61be252d03f2f4
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45869
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Print chipset as hex value in order to make it more readable.
Change-Id: Ifafbe0a1161e9fe6e790692002375f45d813b723
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Implement mainboard_silicon_init_params() to allow for disabling of
TBT root ports if the device does not have usb4 hardware.
Add code to mainboard_memory_init_params() to disable memory-related
settings associated with TBT in cases where no usb4 is available.
BUG=b:167983038
TEST=none
Change-Id: Iab23c07e15f754ca807f128b9edad7fdc9a44b9d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Make boot state init run before the init_chips code. This allows for
correcting tbt settings at a stage earlier than devicetree parsing.
BUG=b:167983038
TEST=none
Change-Id: I8364746ba311575e7de93fa25241ffef7faf35b4
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45961
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Override smbios_fill_dimm_locator for type 17 Locator and Bank Locator.
Also remove CONFIG(GENERATE_SMBIOS_TABLES) compile option because SMBIOS
is always enabled and it makes the code cleaner.
One sample type 17 table displayed as below:
Handle 0x0010, DMI type 17, 40 bytes
Memory Device
...
Locator: DIMM F0
Bank Locator: _Node0_Channel5_Dimm0
Tested=On OCP Delta Lake, the Locator and Bank Locator strings
are expected.
Change-Id: I84531f9ee8bc76d9529aa983bc13e64f40c93138
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For now only implement for one socket and some of the fields
are hard-coded for DDR4 including memory device type, data width
and ECC support.
Change-Id: I3cb72d18027d972140828970206834ff55b72022
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The fields from SystemMemoryMapHob can be used to generate SMBIOS type 17.
Tested=On OCP Delta Lake, verify the values are expected.
Change-Id: I988e7341ddd3b701c698b41451a87890f21cc928
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45797
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With CPX-SP FSP, PCH IOAPIC handles the first 120(0x78) GSIs. Correct
the coreboot assignment of GSIs for IO APICs.
Without this patch, there are following target OS boot messages:
[ 1.098771] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119
[ 1.099159] GSI range [24-31] for new IOAPIC conflicts with GSI[0-119]
After this patch, the boot messages are:
[ 0.399498] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119
[ 0.399848] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 120-127
Also without this patch, there is boot stability issue. About one in
20 reboots, the target OS fails to boot with following failure:
[ 4.325795] mce: [Hardware Error]: Machine check events logged
[ 4.326597] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 9: ee2000000003110a
[ 4.327594] mce: [Hardware Error]: TSC 0 ADDR fe9e0000 MISC 228aa040101086
[ 4.328596] mce: [Hardware Error]: PROCESSOR 0:5065b TIME 1601443875 SOCKET 0 APIC 0 microcode 700001d
The MCE error happens in bank 9. The Model specific error code
shows it is about SAD_ERR_WB_TO_MMIO error (doc 604926), which means
something goes wrong when cache write back to mmio. It is a generic
transaction type error in level 2.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I45e941591300dad6d583a6dcb41f45e984753c07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45941
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel CPX-SP FSP ww40 release adds MeUmaEnable FSP-M parameter,
and adds some fields to HOBs.
Update FspmUpd.h and HOB header files.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I3d456be62a5feecdac267c1e8be52e2a25e8aac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45940
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename all mt_pll_raise_ca53_freq() into mt_pll_raise_little_cpu_freq().
Implement mt_pll_raise_little_cpu_freq() in MT8192.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: I97d9a61f39f2eb27f0c6f911a9199bf0eaae4fbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There's no need to make so much noise when writing IOBP registers.
Change-Id: I1fbb6e409375240544b9b5e810523f9471435f2f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Broadwell does this, so do it on Lynx Point too.
Change-Id: I309f0cbf93e3f75b20cdd049d9437841ef61c03a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I50a783424b0d244eb824db9cd73738108f800003
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Initial code block to select SOC_INTEL_ALDERLAKE Kconfig
2. Add minimum code to make ADL-P RVP build successfully
3. Mainly bootblock and verstage code added to reach till verstage
4. Add support for 2 mainboards as ADL-P board with default EC (Windows
SKU) and Chrome EC (Chrome SKU)
5. Add empty dsdt.asl to avoid compilation error
TEST=Able to build and boot ADL-P RVP till romstage early.
Change-Id: I2b551f48a4eb4d621d9a86c5d189c517d5610069
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=Able to build TGLRVP and JSLRVP.
Change-Id: Ie07df9f59015092a4c2a27b1451f0d556c70f0d8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add gfx.asl file for all IA SOCs to allow for graphics-related ACPI
devices and methods.
TEST=Able to build and boot TGL platform
Dump and disassemble DSDT, verify GFX0 device present as below
Device (GFX0)
{
Name (_ADR, 0x00020000) // _ADR: Address
}
Change-Id: I5560e900a77872552df1064dc3b7a8148e35d682
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch moves gfx.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot CML platform.
1) Dump and disassemble DSDT, verify GFX0 device present inside
common gfx.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ie34181a6783d348265cf4299dec5c41e7f4f736f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
To remove the xhci0_force_gen1 and use usb3_port_force_gen1 instead.
The xhci0_force_gen1 is used for force all port on xhci0 to USB3 GEN1.
Now variant can use the usb3_port_force_gen1 to customize which port
it needs to limit.
BUG=b:167651308
BRANCH=zork
TEST=Build, verify the USB3 speed in gen1
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: If5f0c1f22d8c98c4461f09d074bf082c340b14d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In morphius, the USB3 typeA port needs to set to gen1, and for ezkinil
all the USB3 ports should force to gen1. So set the corresponding
setting to usb3_port_force_gen1 to force USB3 to Gen1.
BUG=b:167651308
BRANCH=zork
TEST=Build, verify the USB3 speed in gen1
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I10419b91fe86fe3e06de36ddfe0d1769c1031f8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UPD usb3_port_force_gen1 for support USB3 port force to gen1.
BUG=b:167651308
BRANCH=zork
TEST=Build, verify the USB3 speed in gen1
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I896c185988c3ea5dbdd72957b363ebdaa2747cff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
VBOOT_STARTS_VEFORE_BOOTBLOCK indicates that verstage starts before
bootblock. However "cbmem -1" will first try to match "bootblock
starting" to find out the beginning of console for current boot.
Change ENV_STRING for verstage to "verstage-before-bootblock" in the
case and add regex in cbmem utility to grab it.
BUG=b:159220781
TEST=flash and boot, check `cbmem -1`
BRANCH=zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ica38f6bfeb05605caadac208e790fd072b352732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
The PSP will now pass us data on the PSP boot mode and the production
silicon level. Print these values out to save in the log.
These definitions are in a vendorcode include directory that was
previously only included in verstage. Add the include directory
to all stages.
BUG=b:170237834
TEST=Build & Boot - See values printed.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Iee87413d1473786cf0e148a8088d27f8d24a47a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
The transfer buffer check had gotten large enough to deserve a function
of its own, so break it out.
BUG=None
TEST=Build
Branch=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Idf46f8edb6b70c63f623522e2bcd2f22d6d4790b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46112
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:169199392
TEST=Corrupt vboot signature to force an error, see that the system
halts instead of rebooting forever.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I949f94e78d25720f6cd7e81de8d030084e267f29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45964
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id913fc4a89ad5eff6b3487354ff8be7661539fe5
Signed-off-by: Manideep Kurumella <mkurumel@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
LIMITS_CFG is not used/required by trogdor. Supporting this requires an FMAP
partition as well as code, removing this support saves space and maintenance
headaches.
Change-Id: I9f57f5b520599ba6d708c91df9851e0e86b4b6c0
Signed-off-by: Manideep Kurumella <mkurumel@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45704
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for trackpoint wakeup from S3 by adding device events to
mainboard and defining for morphius.
BUG=b:160345665
BRANCH=zork
TEST=tested trackpoint wake from S3 on morphius DVT
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I982f0f4b60fbaeb389774531e1dee83da77cb8a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
psp_verstage uses separate printk implementation, which does not include
code to add console output to cbmem.
Add cbmemc_init and cbmemc_tx_byte to add console output to cbmem.
BUG=b:159220781
TEST=build
BRANCH=zork
Change-Id: I63ba5814903565c372dbeb50004565a371dad730
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46059
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 4bb06cc1:
COIL: Change denylist to blocklist
to commit id 4c523ed1:
vboot2: Add support for modexp acceleration
This brings in 10 new commmits.
Change-Id: Iff6eb99c8ed3046b6fdb6c1e2892aab956f3b562
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The PSP bootloader version 0.08.0B.7B added support for the Mod Exp
svc call.
BUG=b:169157796
BRANCH=zork
TEST=build verstage for zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ifdbf20544b21b7fa90a49c5497ff4a5da61bebb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
The PSP bootloader version 0.08.0B.7B added support for the Mod Exp
svc call.
BUG=b:169157796
TEST=Build
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I1ce69c80cec77e1692cf9713a739cc4da4677da6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45942
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`pci_dev_init()` is used to load and run option ROM on VGA class
devices (PCI_CLASS_DISPLAY_VGA). WiFi device is not a VGA class device
and hence the call to `pci_dev_init()` is not required. This change
drops the call to `pci_dev_init()` from `wifi_pci_dev_init()` in Intel
WiFi driver.
BUG=b:169802515
BRANCH=zork
Change-Id: I6588ea0a5c848904088d05fd1cbdf677b2dc8ea9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
WiFi devices supported by the generic WiFi driver are PCIe devices
which need to be managed using the standard pci_dev_* operations to
read, set and enable resources. This change updates the
device_operations structure `wifi_generic_ops` to use the standard
pci_dev_* operations for these devices.
BUG=b:169802515
BRANCH=zork
Change-Id: I8b306259e205ecb963c0563000bd96ec6b978b8b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add an empty SPD in SPD_SOURCES when creating a new variant of
hatch, volteer, waddledee, or waddledoo, so that coreboot can build
successfully.
For variants that use spd_tools, add an empty mem_parts_used.txt so
that the developer can add the supported memory parts and regenerate
the Makefile.inc with the correct SPD references.
Add an empty SPD for LPDDR4x for waddledee and waddledoo to use.
BUG=b:169422833
TEST=create a new variant of hatch, volteer, waddledee, and waddledoo.
Observe that each one succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I06dfb6103701bf8949180595f1e98fac48bcc585
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Remove #include "chip.h", which is not needed and causes a build
problem in a later change. Alphabetise the #includes. Add <types.h>.
Change-Id: If19ccd144bd352a196adccd75f9f6f139eae4e4a
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45968
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prepare for common ACPI code.
Move get_srat_memory_entries() from soc_util.c to soc_acpi.c where
the other srat ACPI functions are located.
Change-Id: If26641497e1c16d5cf493490711aa08d6e1cb640
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45846
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Continue preparations for common ACPI code.
Add code from skx and common/acpi to check the SCI register
instead of using a define.
Change-Id: I6b638d28775320894a6ab24ef486e67c181591eb
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45844
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prepare for common ACPI code. Move skx soc ACPI functions to a
separate file.
Change-Id: I12526c17a0dcbc45494ae19c8abaf8bf9a1eab47
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Prepare for common ACPI code. Move cpx soc ACPI functions to a
separate file, soc_acpi.c
Change-Id: I4aaca660e2f94d856676681417ae6c5d8c28a1f1
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reorder the functions to make it easier to compare with
soc/intel/common/block/acpi/acpi.c and cpx/acpi.c.
Move the xeon_sp specific functions to the top.
Change-Id: I7bc147781261c2fc39374f5bfe3ba79047b4993a
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reorder the functions to make it easier to compare with
soc/intel/common/block/acpi/acpi.c.
Move the xeon_sp specific functions to the top.
Change-Id: I9034eb774a14ee1e2f9b16c7bd7673ebad69c113
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Continue separating the CPU from the PCH.
Move the PCH IRQ ASL from the uncore_irq.asl to a new file,
pch_irq.asl.
Change-Id: Iaf8ae87ecc9f8365cc093516f15d9c5a31c7d1d5
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move ACPI macros to a header file to be used in multiple
ASL files.
This could be moved to intel/common in the future to reduce
the amount of duplicate ASL code.
Tested by checking build/dsdt.asl doesn't change.
Change-Id: Id2441763fe335154048c9a584a227a18e8c5391c
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove the NumElements and allow the ASL compiler to fill them in.
This is safer than hard coding the NumElements.
For Package (NumElements) {PackageList}, "If NumElements is absent,
it is automatically set by the ASL compiler to match the number of
elements in the PackageList" ACPI v6.2 sec 19.6.101.
Change-Id: I73df9e31011ad0861d4755fdbcbbd93e4e0b5a51
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Refer to
commit 0359d9d (soc/intel: Make use of PMC low power program
from common block)
commit 1366e44 (soc/intel: Move pch_enable_ioapic() to common
code)
commit 78463a7 (soc/intel: Move soc_pch_pirq_init() to common code)
commit 8971ccd (soc/intel: Move pch_misc_init() to common code)
for details
Change-Id: Ic83d332cf2bfe8eded1667dd1503e718d854f10b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Select common ACPI Kconfig to include common ACPI code block
from IA-common code
2. Select ACPI Kconfig support for wake up from sleep states.
3. Add SoC ASL code in ASL 2.0 syntax for SoC IPs like IPU, ISH,
LAN, HDA etc.
Change-Id: I7509e8c46038b1edfc501db74e763f198efb56ab
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adjust Touchscreen delay off values to let suspend off timing match
power down specificatiion.
BRANCH=zork
BUG=b:163434386
TEST=Measuring scope timing
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: I58866122f441cc3c427e659b8a5fdb6643987882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
There is requirement to change PM flow for S0ix along with TBT firmware
update under device attached and no device attached scenarios. This
change invokes D3CE and D3CX in DMA _PS3 and _PS0 respectively.
BUG=b:158777291
TEST=Validated s0ix cycles for USB4 device attached and no device
attached test cases along with updated TBT firmware rev35.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Iebc8065fe4c8600960d089577608890ab12a95fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch makes Fleex EC wake up AP from s0ix when the state of
charge drops to 5%.
Demonstrated as follows:
1. Boot Fleex.
2. Run powerd_dbus_suspend.
3. On EC, run battfake 5.
4. System resumes.
BUG=b:163721887
BRANCH=Octopus
TEST=Verified on Fleex:
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I4a998ad0aef5a7cfc6fd18995bde5571e6127e77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Add case for LPDDR4x to spd_get_name().
BUG=b:169800932, b:168724473
TEST=none
Change-Id: I6bae373468b8ad5ae0a6b8dd6bbe14143afb85af
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45886
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable CHROMEOS_DRAM_PART_NUMBER_IN_CBI on hatch, dedede, and volteer
to use the common version of mainboard_get_dram_part_num().
Remove duplicate instances of mainboard_get_dram_part_num().
BUG=b:169789558, b:168724473
TEST="emerge-volteer coreboot && emerge-hatch coreboot &&
emerge-dedede coreboot" and verify it builds.
Change-Id: I4e29d3e7ef0f3370eab9a6996a5c4a21a636b40e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45883
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Consolidate all weak declarations of mainboard_get_dram_part_num() to
instead use the common definition in lib/spd_bin.c.
BUG=b:168724473
TEST="emerge-volteer coreboot && emerge-nocturne coreboot &&
emerge-dedede coreboot" and verify build succeeds without error.
Change-Id: I322899c080ab7ebcf1cdcad3ce3dfa1d022864d1
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add CHROMEOS_DRAM_PART_NUMBER_IN_CBI Kconfig option to declare whether
the SPD Module Part Number (memory part name) is stored in the CBI.
Move mainboard_get_dram_part_num() into src/vendor/google/chromeos
to allow mainboards to use it without having to duplicate that code
by enabling the CHROMEOS_DRAM_PART_NUMBER_IN_CBI config option.
BUG=b:169789558, b:168724473
TEST="emerge-volteer coreboot && emerge-hatch coreboot &&
emerge-dedede coreboot && emerge-nocturne coreboot" and verify it
builds.
Change-Id: I0d393efd0fc731daa70d3990e5b69865be99b78b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:169774661, b:168724473
TEST="emerge-volteer coreboot && emerge-nocturne coreboot &&
emerge-dedede coreboot" and verify they build successfully.
Change-Id: I8b228475621ca1035fe13f8311355fc3b926e897
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change mainboard_get_dram_part_num() to return a constant character
pointer to a null-terminated C string and to take no input
parameters. This also addresses the issue that different SOCs and
motherboards were using different definitions for
mainboard_get_dram_part_num by consolidating to a single definition.
BUG=b:169774661, b:168724473
TEST="emerge-volteer coreboot && emerge-dedede coreboot && emerge-hatch
coreboot" and verify build completes successfully.
Change-Id: Ie7664eab65a2b9e25b7853bf68baf2525b040487
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45873
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add missing __weak declaration to Elkhart Lake's definition of
mainboard_get_dram_part_num().
BUG=b:169774482, b:168724473
TEST=none
Change-Id: I883d662315a9ab91eb6183ebcdfd7e7cc8064c64
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45871
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The coreboot toolchain has been using a newer GCC version for a while
already. This code is build-tested from commit 13cd145e02e onwards.
Change-Id: Ic324b503878c73e4560d4d8f2e0d38ecb595b8fd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45822
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I8deaeb29abed097d536f1c3c44606a549c6af4e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch moves ish.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CML platform.
1) Dump and disassemble DSDT, verify ISHB device present inside
common ish.asl is still there with correct _ADR value.
2) Verify no ACPI error seen while running 'dmesg` from console.
CML platform:
Device (ISHB)
{
Name (_ADR, 0x00130000) // _ADR: Address
Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name
}
TGL/JSL platform:
Device (ISHB)
{
Name (_ADR, 0x00120000) // _ADR: Address
Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name
}
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I33c1649d7a632c7b147e1bf307cfb5c1dfd84c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I4c4b40b2b4f54b7756b8485dad80a1b4786270f7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Drop unused includes and add missing <types.h>.
Change-Id: Ifefe81d4727d67ea702c5e24527f80a0614aa396
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Every platform passes (and need to) the --flashsize to the command
parameter, so we remove the macro definition about a built-time
romsize defined in Makefile.
Change-Id: I894e833ed23a7da38b36986b624e7dcdf1f4090c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
New Jenkins complaint about the original code that return
value gets to nowhere. Fix that with a new variable.
Change-Id: I8099b856ccb751dc380d0e95f5fe319cc3e2c6cc
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45812
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Makefile.inc to compliant with other tools.
Makefile is kept for building amdfwtool by typing make
in the folder.
Change-Id: I3688d93de4459f5f838955892086b4b9bf30a9b8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Enable eMMC with HS200 mode for mc_apl6 mainboard.
TEST: Linux booted and checked with 'lspci'.
Change-Id: Ib760a1a26a92047e8916979ffb5001bcff0a6e45
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45898
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves platform.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify _PIC method present inside
common platform.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I3fcd971402e540d91a7392ca58175eb3ecc24cec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45981
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refer _WAK and _PTS ASL functions from common platform.asl
TEST=Dump and disassemble DSDT, verify all methods present inside
common platform.asl like _WAK, _PTS etc. are still there.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I625e42b3c49abbb3595a4307da5fc24850a98fbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45980
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves smbus.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify SBUS device present inside
common smbus.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ib1ae48f7ece3e521501d92c40cd551287ea2f1ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Delete SoC local copy of ipu.asl and refer from common block ipu.asl
TEST=Dump and disassemble DSDT on tglrvp, verify IPU0 device
present there.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I6a0f8a919092f7bbcd64d4791746d30fdee33894
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I8c7363d442ed40c36fc01dc3608bab864865f29d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45977
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IMGU->IPU0 to align with other SoC IPU entires.
TEST=Dump and disassemble DSDT on poppy, verify IPU0 device
present there.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I803c01f9156a56dbd903b6ba7897cc0f96b0a26a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch moves pch_glan.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify GLAN device present inside
common pch_glan.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I479678c864eba39e5ab04f658600e8cba48198ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit f23794cf04030bb8d1d7ebe0a3634dffd092e2f7.
Reason for revert: This change breaks compatibility if the changes
in CB:44775 are not also included. CB:44775 is still under discussion,
so revert this change to make spd_tools usable again.
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5840a1b895dcbc8b91c76d8b60df2f95b93a4370
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44999
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till ramstage
2. Include only required headers into include/soc
3. Add CPU, PCH and SA EDS document number and chapter number
4. Fill required FSP-S UPD to call FSP-S API
Change-Id: I3394f585d66b14ece67cde9e45ffa1177406f35f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Rename pci_irq.asl to pci_irqs.asl to match other intel soc file
names. This makes comparing differences much easier.
Change-Id: I622dfef675c3df2dff7a3024ccbe14c356a5cd86
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45834
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prepare for merging cpx and skx pci_devs.h.
Remove duplicate defines. Move defines so they match each other.
Checked TiogaPass and DeltaLake BUILD_TIMELESS.
Change-Id: I146dd9e3f7eba053977d48dcf34d927dea310059
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Select PMC_LOW_POWER_MODE_PROGRAM from applicable SoC directory
2. Remove redundant PMC programming from SoC and refer to common
code block
3. Remove unused 'reg8' and 'reg32' variable as applicable from SoC
function.
Change-Id: I18894c49cfc6e88675b5fb71bca0412e5639fb4b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45796
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Create Kconfig to select pmc low power program by SoC
2. Add API to make ACPI timer disable
3. Add API to ignore XTAL shutdown for SLP_S0# assertion
Change-Id: I017ddc772f02ccba889d316319ab3d5626b80ba5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45794
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Move pch_misc_init() into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
3. Create macros for IO port 0x61 and 0x70 as applicable.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: Ie36ee63869c076d251ccfa5409001d18f22600d7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Rename soc_pch_pirq_init() as pch_pirq_init() and
move into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: I856b5ca024e58fd14b4d1721f23d9516a283ebf8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Move pch_enable_ioapic() into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: I2a6afc1da50c8ee5bccda7f5671b516dc31fe023
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move duplicate .h files to top level xeon_sp/include/soc from
silicon specific cpx/include/soc and skx/include/soc.
Change-Id: I11d8a95a4b2f9451615b236798b3bd030c724858
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45221
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up acpi.h in preparation for merging with cpx/ acpi.* files
Change-Id: I2a0dc964eeb7f8da53676eb94c4385ff8668f6af
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45218
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|