aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-17rtc: Force negative edge on SET after battery replacementMarshall Dawson
After the RTC coin cell has been replaced, the Update Cycle Inhibit bit must see at least one low transition to ensure the RTC counts. The reset value for this bit is undefined. Examples have been observed where batteries are installed on a manufacturing line, the bit's state comes up low, but the RTC does not count. Change-Id: I05f61efdf941297fa9ec90136124b0c8fe0639c6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17rtc: Check update-in-progress bitMarshall Dawson
While the real-time clock updates its count, values may not be correctly read or written. On reads, ensure the UIP bit is clear which guarantees a minimum of 244 microseconds exists before the update begins. Writes already avoid the problem by disabling the RTC count via the SET bit. Change-Id: I39e34493113015d32582f1c280fafa9e97f43a40 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17369 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17arch/x86/acpigen: Implement acpigen functions to return integer & stringNaresh G Solanki
Add ACPI method to return integer & string. Change-Id: I2a668ccadecb71b71531e2eb53a52015fca96738 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17450 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17google/snappy: Update DPTF settingsWisley Chen
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU passive point:100, critical point:105 TSR1 passive point:48, critial point:65 TSR2 passive point:85, critial point:100 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 3W, and max to 6W Set PL2 min and max to 8W 3. Change thermal relationship table (TRT) setting. The TRT of TCHG is TSR1, but real sensor is TSR2. BRANCH=master BUG=none TEST= Compiled, verified by thermal team. Change-Id: Ib197c36eca88e3d05f632025cf3c238e1a2eae23 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17426 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
The following devices i2c6, i2c7, spi1, spi2, uart3 are not used. BUG=chrome-os-partner:59880 TEST=Boot to OS and lspci command should not list the above disabled devices. Change-Id: I819cdb34709703e6431b49446417ed9d6b3543cd Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/17441 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17mb/intel/kblrvp: Remove unused configs in KconfigNaresh G Solanki
Remove unused drivers & nhlt in Kconfig. Change-Id: Ic1e8a98a77a0061e749019665f955b921f85975e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17427 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
Provide the rise and fall times for the i2c buses and let the library perform the necessary calculations for the i2c controller registers instead of manually tuning the values. BUG=chrome-os-partner:58889,chrome-os-partner:59565 Change-Id: I0c84658471d90309cdbb850e3128ae01780633af Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17397 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-17google/gru: Move to one CA training patternDerek Basehore
This changes memory to only do CA training with one pattern, 0xfffff/0x00000 and to also make sure CA training waits for all of the captures during training. BRANCH=none BUG=chrome-os-partner:56940 TEST=boot kevin and run stressapptest -M 1500 -s 1000 Change-Id: I0982674b4f4415f4d7865923ced93fa09bdd877e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 75cdd911cea9c4e5744fd04505b260fa5755513c Original-Change-Id: I3b86e6d4662c6fbbf9ddef274fce191a367904e5 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/410320 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17383 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/gru: Add new CA training patternDerek Basehore
This adds a new CA training pattern for all of the supported frequencies. This pattern increases the hold time on CA. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run: while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: Ie5958cf67c16247ef90ee261da9faef4ffa5b339 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8babeafe75bffcb2dab17eb007b4f5bb0eb42606 Original-Change-Id: I7f7652f88e43dc9b2f6069e60514931bf7582ed1 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/403547 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17382 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/oak: Add more DRAM modules supportPH Hsu
Add support for following 3 modules. - Micro MT52L256M32D1PF / MT52L512M32D2PF - Hynix H9CCNNNBJTALAR Hana EVT was planed to add 4 DRAM modules but RAM_CODE=5 is not used in the end. This patch also unifies the naming of the RAM configurations. BUG=chrome-os-partner:58983 TEST=verified on Hana EVT. Change-Id: I7dd44525de8e9dde01f210f4730fa8ccd4baef21 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5dccd68149bcfd6fd0a83e310d43063bab645691 Original-Change-Id: I7c245c8c24be159e152f4f3cca25bf970b58425c Original-Signed-off-by: Milton Chiang <milton.chiang@mediatek.com> Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/402888 Original-Reviewed-by: Pin-Huan Hsu <ph.hsu@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Paris Yeh <pyeh@chromium.org> Reviewed-on: https://review.coreboot.org/17381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17arm64: arm_tf: Do not build raw bl31.bin binaryJulius Werner
coreboot's build system picks up the BL31 image as an ELF from the ARM Trusted Firmware submodule and inserts it into CBFS. However, the generic 'bl31' build target we run in the ARM Trusted Firmware build system also generates a raw bl31.bin binary file. We don't need that binary, and with the recently added support for multiple non-contiguous program segments in BL31 it can grow close to 4GB in size (by having one section mapped near the start and one near the end of the address space). To avoid clogging up people's hard drives with 4GB of zeroes, let's only build the target we actually need. BRANCH=gru BUG=chrome-os-partner:56314,chromium:661124 TEST=FEATURES=noclean emerge-kevin coreboot, confirm that there's no giant build/3rdparty/arm-trusted-firmware/bl31.bin file left in the build artifacts, and that we still generate .d prerequisite files. Change-Id: I8e7bd50632f7831cc7b8bec69025822aec5bad27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 31699820f4c36fd441a3e7271871af4e1474129f Original-Change-Id: Iaa073ec11dabed7265620d370fcd01ea8c0c2056 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/407110 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17380 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17rockchip/rk3399: Change 933 DPLL to low jitter rateDerek Basehore
This changes the 933 DPLL rate to 928 which has low jitter. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: I4d2a8871aaabe3b0a1a165c788af265c5f9e892c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 54ebf8763bb8193c4b36a5e86f0c625b176d31a6 Original-Change-Id: Iaa12bf67527b6d0e809657c513b8d1c66af25174 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/404550 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17379 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17rockchip/rk3399: Change PLL configuration to match Linux kernelJulius Werner
The Kevin project has been too smooth and boring for our tastes in the last last few weeks, so we've decided to stir the pot a little bit and reshuffle all our PLL settings at the last minute. The new settings match exactly what the Linux kernel expects on boot, so it doesn't need to reinitialize anything and risk a glitch. Naturally, changing PLL rates will affect child clocks, so this patch changes vop_aclk (192MHz -> 200MHz, 400MHz in the kernel), pmu_pclk (99MHz -> 96.57MHz) and i2c0_src (198MHz -> 338MHz, leading to an effective I2C0 change 399193Hz -> 398584Hz). BRANCH=gru BUG=chrome-os-partner:59139 TEST=Booted Kevin, sanity checking display and beep. Instrumented rockchip_rk3399_pll_set_params() in the kernel and confirmed that GPLL, PPLL and CPLL do not get reinitialized anymore (with additional kernel patch to ignore frac divider when it's not used). Also confirmed that /sys/kernel/debug/clk_summary now shows pclk_pmu_src 96571429 because the kernel doesn't even bother to reinitialize the divisor. Change-Id: Ib44d872a7b7f177fb2e60ccc6992f888835365eb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9b82056037be5a5aebf146784ffb246780013c96 Original-Change-Id: Ie112104035b01166217a8c5b5586972b4d7ca6ec Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/405785 Original-Commit-Ready: Xing Zheng <zhengxing@rock-chips.com> Original-Tested-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17378 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17crossgcc/buildgcc: Add package version to saved .success fileMartin Roth
Previously, the .success file for each target didn't save the version, of the package that was built. This created problems when someone wanted to update to a new version and could not rebuild. Change-Id: I9975b198ac4a7de8ff9323502e1cbd0379a1dbb8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17417 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17soc/broadcom/cygnus: Update DDR KconfigMartin Roth
The DDR speed Kconfig symbols needed to either be added to the Kconfig tree, or have the code associated with them removed. I chose to add the symbols. - Add symbols for DDR333 - DDR667 to cygnus Kconfig. These should be selected by the mainboard. - Rename symbols from DDRXXX to CYGNUS_DDRXXX to match the existing CYGNUS_DDR800 symbol. - Rename the non Kconfig #define CONFIG_DRAM_FREQ to CYGNUS_DRAM_FREQ because having other #defines look like Kconfig symbols is confusing. - Change #ifdef CONFIG_DDRXXX to use IS_ENABLED Change-Id: I3f5957a595072434c21af0002d57ac49b48b1e43 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17386 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2016-11-17soc/intel/apollolake: Enable and Lock AES feature registerNelson, Cole
Configure MPinit feature register during boot and s3 resume. Enable and Lock Advanced Encryption Standard (AES-NI) feature. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: Id16f62ec4e7463a466c43d67f2b03e07e324fa93 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17396 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17sio/ite/common: Add generic environment-controller driverNico Huber
The environment-controller entity is shared by many ITE super-i/o chips. There are some differences between the chips, though. To cover that, the super-i/o chip should select Kconfig options of this driver accordingly. The current implementation isn't exhaustive: It covers only those parts that are connected on boards I could test, plus those that are currently used by the IT8772F. The latter could be ported to use this driver if somebody minds to test it. Change-Id: I7a40f677f667d103ce1d09a3e468915729067803 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17284 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17arch/x86/acpigen: acpigen buffer size fixNaresh G Solanki
In function definition of acpigen_write_byte_buffer, buffer size written using acpigen_emit_byte gives wrong results in generated AML code for buffer size greater than one. Write buffer size using acpigen_write_integer as per ACPI spec 5.0 section 20.2.5.4 BufferOp. Change-Id: I0dcb25b24a1b4b592ad820c95f7c2df67a016594 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17444 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-16drivers/i2c/alps: Add support for ALPS Touchpad driverBarnali Sarkar
Add support for I2C ALPS Touchpad Device Driver. BUG=none BRANCH=none TEST=Build and booted successfully on KBL RVP and Touchpad is working Change-Id: I78b77bd7c4694ccf61260724f593bd59545c70e6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17390 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-16include/device/pci_ids.h: Correct Entertainment sub-classElyes HAOUAS
According to PCI LOCAL BUS SPECIFICATION, REV. 3.0 page 305, the sub-class for Entertainment en/decryption is 0x1010 Change-Id: Ia069e2ec328a8180fc1e2e70146c3710e703ee59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17436 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-16intel/fsp_baytrail: Fix assignment of PcdeMMCBootModeDavid Imhoff
Before the PcdeMMCBootMode in the Updatable Product Date was always assigned and didn't take into account the + 1 increment for the default define. Now if the configuration indicates that the device tree should be followed PcdeMMCBootMode is initially disabled. Else if configuration isn't the default, assign the value with the + 1 increment substracted. TEST=Intel/MinnowMax Change-Id: I6755eb585d1afe3a15f83347fba834766eb44ad2 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: https://review.coreboot.org/10165 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16intel/fsp_baytrail: Always log PcdEnableLpe and PcdeMMCBootModeDavid Imhoff
Log the values of PcdEnableLpe and PcdeMMCBootMode even if they are outside of the expected range. TEST=Intel/MinnowMax Change-Id: Ie0aea4287234b23d4e9852f3991dcc78ce8103d9 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: https://review.coreboot.org/10164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
Reef board uses GPIO_17 as DMIC config pin. This pin distinguishes board with Quad DMIC's or Mono DMIC. This patch adds necessary DMIC endpoints to support either of those configurations. CQ-DEPEND=CL:*304339,CL:409774 BUG=chrome-os-partner:56918 BRANCH=none TEST=Verify Mono and Quad Channel DMIC record Change-Id: I5b2825b5f39f8962985a129f8ec65265fb18f0b2 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17158 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-16mb/ga-945gcm-s2l: Clean up SuperioArthur Heymans
GPIO register at offset 0xfc (VID Input Register) is read-only but writing 1 to bit 0 will update initial VID input. Change-Id: Ie372e98f8e497eede382975262a63d58c16227b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17412 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-16google/eve: Fill out memory ID tableDuncan Laurie
Add the DIMM SPD data for memory types that are not used yet but are on the matrix and may be used in future builds. Also fix a typo in the part number string for one type. BUG=chrome-os-partner:58666 TEST=build and boot on eve p0 Change-Id: I20401d7afb69f1c3ae1a3b0d6e3ec9097f54ef96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17437 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-16vboot: make TPM factory init sequence more robust.Vadim Bendebury
Currently the code considers the absence of the NVRAM firmware rollback space a a trigger for invoking the TPM factory initialization sequence. Note that the kernel rollback and MRC cache hash spaces are created after the firmware rollback space. This opens an ever so narrow window of opportunity for bricking the device, in case a startup is interrupted after firmware space has been created, but before kernel and MRC hash spaces are created. The suggested solution is to create the firmware space last, and to allow for kernel and MRC cache spaces to exist during TPM factory initialization. BRANCH=none BUG=chrome-os-partner:59654 TEST=odified the code not to create the firmware space, wiped out the TPM NVRAM and booted the device. Observed it create kernel and MRC cache spaces on the first run, and then reporting return code 0x14c for already existing spaces on the following restarts. Verified that the device boots fine in normal and recovery modes and TPM NVRAM spaces are writeable in recovery mode. Change-Id: Id0e772448d6af1340e800ec3b78ec67913aa6289 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/17398 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-16vboot: TPM2 - report attempts to re-create NVRAM spacesVadim Bendebury
Currently the tlcl_define_space() function returns the same error value for any non-zero TPM response code. The thing is that the caller might want to allow attempts to re-create existing NVRAM spaces. This patch adds a new API return value to indicate this condition and uses it as appropriate. BRANCH=none BUG=chrome-os-partner:59654 TEST=for test purposes modified the code not to create the firmware space, wiped out the TPM NVRAM and booted the device. Observed it create kernel and MRC index spaces on the first boot and then reporting return code 0x14c for already existing spaces on the following restarts. Change-Id: Ic183eb45e73edfbccf11cc19fd2f64f64274bfb2 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/17422 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-16arch/x86/acpigen: Fix acpigen for If (Lequal (...))Furquan Shaikh
acpigen_write_if_lequal is used to generate ACPI code to check if two operands are equal, where operand1 is an ACPI op and operand2 is an integer. Update name of function to reflect this and fix code to write integer instead of emitting byte for operand2. TEST=Verified by disassembling SSDT on reef that ACPI code generated for If with operand2 greater than 1 is correct. If ((Local1 == 0x02)) { Return (0x01) } Else { Return (Buffer (One) { 0x00 /* . */ }) } Change-Id: If643c078b06d4e2e5a084b51c458dd612d565acc Reported-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17421 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-16Revert "ec/lenovo/h8: don't load configuration when booting from s3"Nico Huber
This reverts commit 83df672d2ce481686c5c4e04625bc1b97d7a4a8b. It's based on the assumption that the H8 keeps its configuration during a suspend/resume cycle. User reports indicate that this might not be true. Caching the settings in a cbtable entry might be a better approach. Change-Id: Ic4ba862ee7068ffe214c2aeaadecb4390a0e0529 Reviewed-on: https://review.coreboot.org/17411 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-11-15intel/apollolake: Ensure SPI operations do not cross 256-byte boundaryFurquan Shaikh
BIOS needs to ensure that SPI write does not cross 256-byte boundary. Else, if the write is across 256-byte boundary, then it corrupts the block by wrapping write to start of current block. Thus, ensure nuclear_spi_{read,write} operate within a single 256-byte block only at a time. BUG=chrome-os-partner:59813 BRANCH=None TEST=Verified that elog writes do not corrupt the event log when write is across 256-byte blocks. Change-Id: I854ca2979d65b9f1232f93182cb84d4dee4f4139 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17419 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-15northbridge/via/vx800: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/vx800. Change-Id: I14a2b4d847f8aeb327d90f385dea998779fae24f Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17316 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15northbridge/via/cx700: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/cx700. Change-Id: I6e25f898ab55ee959f1b3b8aba9616c3ba18986d Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17315 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15northbridge/intel/i855: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/intel/i855. Change-Id: Iae66d1ef838095a560868d9c9ff81f4208f814f1 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17314 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15northbridge/amd/agesa/family10: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/amd/agesa/family10. Change-Id: I5723e217fc739ab576cbe3a1ee6d92023190267c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17313 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/via/vt8454c: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/via/vt8454c. Change-Id: I94e22e1d814733c4049e78e5b3c23b9bb429f6fa Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17312 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/via/epia-m700: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/via/epia-m700. Change-Id: I7a16a9f396d50279cf2bd13de72bd78e8f53f7d8 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17311 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/via/epia-cn: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/via/epia-cn. Change-Id: I1b05abcedc427e4876e1fdab85298015308a3d17 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17310 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15mainboard/tyan/s8226: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/tyan/s8226. Change-Id: I41729fc03518a7804ae224c773967453a7ab60a7 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17309 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-15google/link/i915.c: Fix build error when native gfx init enabledIru Cai
- Move members of struct edid to struct edid_mode - Change `u32 pmmio` to `u8 *pmmio` in i915_lightup_sandy Change-Id: Id64daf5eae1d4d8265105067b2e6ae55786a5638 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/17332 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-15nb/gm45: Refactor IGD vram decodingArthur Heymans
This is more consistent with other Intel GMCH code. Change-Id: I7bfaa79b9031e2dcc5879a607cadacbdd22ebde7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17405 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-14google/chromeec: Add elog events for recovery mode switchesFurquan Shaikh
BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified eventlog on reef 0 | 2016-11-12 19:49:25 | Log area cleared | 4088 1 | 2016-11-12 19:49:25 | Kernel Event | Clean Shutdown 2 | 2016-11-12 19:49:25 | ACPI Enter | S5 3 | 2016-11-12 19:49:39 | System boot | 365 4 | 2016-11-12 19:49:39 | EC Event | Power Button 5 | 2016-11-12 19:49:45 | Chrome OS Recovery Mode | Recovery Button Pressed 6 | 2016-11-12 19:49:45 | Chrome OS Developer Mode 7 | 2016-11-12 19:49:45 | EC Event | Keyboard Recovery 8 | 2016-11-12 19:49:45 | Memory Cache Update | Recovery | Success 9 | 2016-11-12 19:50:46 | System boot | 366 10 | 2016-11-12 19:50:46 | EC Event | Power Button 11 | 2016-11-12 19:50:52 | Chrome OS Recovery Mode | Recovery Button Pressed 12 | 2016-11-12 19:50:52 | Chrome OS Developer Mode 13 | 2016-11-12 19:50:52 | EC Event | Keyboard Recovery Forced Hardware Reinit 14 | 2016-11-12 19:50:52 | Memory Cache Update | Recovery | Success 15 | 2016-11-12 19:51:24 | Power Button 16 | 2016-11-12 19:51:24 | ACPI Enter | S5 17 | 2016-11-12 19:51:27 | System boot | 367 18 | 2016-11-12 19:51:27 | EC Event | Power Button 19 | 2016-11-12 19:51:32 | Wake Source | Power Button | 0 20 | 2016-11-12 19:51:32 | ACPI Wake | S5 21 | 2016-11-12 19:51:32 | Chrome OS Developer Mode 22 | 2016-11-12 19:51:32 | Memory Cache Update | Normal | Success Change-Id: I45dda210cf9d4e5a75404792fcee15b2010787a7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17394 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14vboot: Add new function for logging recovery mode switchesFurquan Shaikh
BUG=chrome-os-partner:59352 BRANCH=None TEST=Compiles successfully Change-Id: I87cd675ea45a8b05a178cf64119bf5f9d8d218ca Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17408 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14elog: Update event log IDs for EC eventsFurquan Shaikh
BUG=chrome-os-partner:59352 BRANCH=None TEST=Compiles successfully Change-Id: Idf2d377bf4709ea25616adfbde55f39798c0cd39 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17393 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14commonlib: Add new cbmem id for EC_HOSTEVENTFurquan Shaikh
BUG=chrome-os-partner:59352 BRANCH=None TEST=Compiles successfully. Change-Id: Ife167bff484ef552bd6cd2e61fdc8291ad6a8acf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17392 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14lib/tpm2: do not create all NVRAM spaces with the same set of attributesVadim Bendebury
The TPM spaces created by the RO need to have different attributes depending on the space's use. The firmware rollback counter and MRC hash spaces are created by the RO code and need to be protected at the highest level: it should be impossible to delete or modify the space once the RO exits, and it is how it is done before this patch. The rest of the spaces should be possible to modify or recreate even after the RO exits. Let's use different set of NVRAM space attributes to achieve that, and set the 'pcr0 unchanged' policy only for the firmware counter and MRC cache spaces. The definitions of the attributes can be found in "Trusted Platform Module Library Part 2: Structures", Revision 01.16, section "13.2 TPMA_NV (NV Index Attributes)." CQ-DEPEND=CL:410127 BRANCH=none BUG=chrome-os-partner:59651 TEST=verified that the reef system boots fine in both normal and recovery modes; using tpmc confirmed that firmware, kernel and MRC cache NVRAM spaces are readable in both and writeable only in recovery mode. Change-Id: I1a1d2459f56ec929c9a92b39175888b8d1bcda55 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/17388 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Pronin <apronin@chromium.org>
2016-11-14soc/intel/apollolake: Increase HEAP_SIZESathyanarayana Nujella
Adding both 2-ch & 4-ch DMIC blob causes the below error: memalign(boundary=8, size=3048): failed: Tried to round up free_mem_ptr 7abc48b0 to 7abc5498 but free_mem_end_ptr is 7abc4d70 Error! memalign: Out of memory (free_mem_ptr >= free_mem_end_ptr) Increased heap size fixes the above issue. BUG=chrome-os-partner:56918 BRANCH=none TEST=Compiles successfully for reef Change-Id: Ic910f169f7ef4bb746cb273e276428713a884227 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17157 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14soc/intel/apollolake: Add support for DMIC 4ch & 1chSathyanarayana Nujella
Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14soc/nvidia/tegra210: Remove CONSOLE_SERIAL_TEGRA210_UART_CHOICESMartin Roth
The Kconfig symbol CONSOLE_SERIAL_TEGRA210_UART_CHOICES was attached to a choice, and isn't used anywhere. Remove it as unnecessary. Change-Id: I4efd2e43ac34b266db0d40d1bc8c123bd377b3a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17391 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-11-14intel/apollolake: Enable turboShaunak Saha
This patch adds punit initialization code after FspMemoryInit so that turbo can be initialized after that. BUG=chrome-os-partner:58158 BRANCH=None Change-Id: I4939da47da82b9a728cf1b5cf6d5ec54b4f5b31d Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/17203 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14soc/rockchip: split edp_enable() functionLin Huang
To avoid garbage display in firmware on warm reset, we need to enable eDP display in depthcharge instead when the framebuffer is cleared. Therefore limit edp_enable() in coreboot to just configure eDP, and leave enabling the display to depthcharge. CQ-DEPEND=CL:402071 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, and display work Change-Id: I9d937ead33ebba58e33e02fd73b80d6e11bb69aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38b0d18c3fae37dfccb18fe809f763b98703167c Original-Change-Id: Ibbc283a5892b98f4922f02fd67465fe2e1d01b71 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/402095 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17207 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-14google/chell : update DPTF policy settingsSumeet Pawnikar
Fine tuned DPTF policy values for chell device as below, 1. Increase Passive temperature value to 52 degree Celsius for TSR2. 2. Remove charger effect for TSR2. 3. Increase Minimum PowerLimit1 to 3W. 4. Reduce Maximum PowerLimit1 to 6W. BUG=chrome-os-partner:54718 BRANCH=None. TEST=Built for chell device. Change-Id: I46f69e3cd527ea3d28bdd7daa29d91f76770c277 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17376 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14skylake: Update the thermal time window for throttling actionSumeet Pawnikar
This patch reduces the thermal time window to 100 milliseconds for fast throttling action at prochot. BUG=chrome-os-partner:59397 BRANCH=None. TEST=Built for skylake platform and verified the thermal time window value. Change-Id: If79d213cb8e19277ffdb882267d2f8672df93446 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17384 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14drivers/pc80/tpm: Select TPM device name based on Kconfig optionSubrata Banik
Device ID remains same for SLB9670 Infineon TPM 1.1 and TPM 2.0 chip. Hence select based on TPM2 Kconfig option. BUG=none BRANCH=none TEST=Build and boot SKL RVP with SPI TPM 2.0 module Change-Id: I57e63f2f2899d25ed6b797930fd8bf1d1cdc1b1d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17374 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14intel/kblrvp: Enable TPMNaresh G Solanki
Add choice to build without TPM, TPM 1.2 support or TPM 2.0 support. Additionally configure lpc clock pad used with LPC TPM & update devicetree.cb. Change-Id: I1c24fdefa6e73637b3037ecf118559abe5fde300 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17367 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-14riscv: add a variable to control trap managementRonald G. Minnich
This variable can be set in a debugger (e.g. Spike) to finely control which traps go to coreboot and which go to the supervisor. Change-Id: I292264c15f002c41cf8d278354d8f4c0efbd0895 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17404 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-13Documentation: Add Kconfig documentMartin Roth
Change-Id: I99ca65343d52e99611644c0c65f4b7feb5c58436 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16947 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins)
2016-11-13riscv: change payload() to pass the config string pointer as arg0Ronald G. Minnich
The riscv 1.9 standard defines a textual config string to be passed to kernels and hypervisors. Change the payload function to pass this string in a0. Change-Id: I3be7f1712accf2d726704e4c970f22749d3c3f36 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17254 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-12MAINTAINERS: Add lowrisc files to RISC-VJonathan Neuschäfer
Change-Id: I8e9ff5821e15cd9a5966927a8cd8bd95f7021d58 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17402 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-12riscv: start to use the configstring functionsRonald G. Minnich
These functions will allow us to remove hardcodes, as long as we can verify the qemu and lowrisc targets implement the configstring correctly. Hence, for the most part, we'll start with mainboard changes first. Define a new config variable, CONFIG_RISCV_CONFIGSTRING, which has a default value that works on all existing systems but which can be changed as needed for a new SOC or mainboard. Change-Id: I7dd3f553d3e61f1c49752fb04402b134fdfdf979 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17256 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-12riscv: bring in the configstring parsing functions from UCBRonald G. Minnich
I've tested this with commits to come later. This is from the lowrisc bbl distribution, 87588c4, with fixes so it builds. Change-Id: I87893638872259c94d6972e1971578b633155e7e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17255 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-11-12drivers/intel/fsp2_0: track end of firmware notificationsAaron Durbin
The end of firmware notification is currently not being tracked so it's hard to get good data on how long it takes. Update the code to provide timestamp data as well as post codes. BUG=chrome-os-partner:56656 Change-Id: I74c1043f2e72d9d85b23a99b8253ac465f62a7f2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17373 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
2016-11-12soc/intel/apollolake: cache the MMIO BIOS regionAaron Durbin
If the boot media is memory mapped temporarily mark it as write protect MTRR type so that memory-mapped accesses are faster. Depthcharge payload loading was sped up by 75ms using this. BUG=chrome-os-partner:56656,chrome-os-partner:59682 Change-Id: Iba87a51a05559d81b8e00fa4f6824dacf7a661f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17372 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-12cpu/x86/mtrr: allow temporary MTRR range during corebootAaron Durbin
Certain platforms have a poorly performing SPI prefetcher so even if accessing MMIO BIOS once the fetch time can be impacted. Payload loading is one example where it can be impacted. Therefore, add the ability for a platform to reconfigure the currently running CPU's variable MTRR settings for the duration of coreboot's execution. The function mtrr_use_temp_range() is added which uses the previous MTRR solution as a basis along with a new range and type to use. A new solution is calculated with the updated settings and the original solution is put back prior to exiting coreboot into the OS or payload. Using this patch on apollolake reduced depthcharge payload loading by 75 ms. BUG=chrome-os-partner:56656,chrome-os-partner:59682 Change-Id: If87ee6f88e0ab0a463eafa35f89a5f7a7ad0fb85 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17371 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-12soc/intel/common/lpss_i2c: configure buses by rise/fall timesAaron Durbin
The default register count calculations are leading to higher frequencies than expected. Provide an alternative method for calculating the register counts by utilizing the rise and fall times of the bus. If the rise time is supplied the rise/fall time values are used, but the register overrides take precedence over the rise/fall time calculation. This allows platforms to choose whichever method works the best. BUG=chrome-os-partner:58889 Change-Id: I7747613ce51d8151848acd916c09ae97bfc4b86a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17350 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-11lib/tlcl: Ensure tlcl library is initialized only onceFurquan Shaikh
Since tlcl library is used other than just vboot driver, ensure that the library is initialized only once per stage. BUG=chrome-os-partner:59355 BRANCH=None TEST=Verified in recovery mode on reef, tlcl library is initialized only once in romstage. Change-Id: I6245fe9ed34f5c174341b7eea8db456b45113287 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17364 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11samsung/stumpy: fix power LED operationMatt DeVillier
commit 80EF7B7 [IT8772F: Clean up it8772f includes and add a LED API] broke power LED operation when it incorrectly transferred values from the old function (it8772f_gpio_setup) to the new one ( it8772f_gpio_led). Restore the correct values so power LED illuminates when powered on. Change-Id: I99a38351bb52063fafa7436e6397a8da7fc1e952 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17266 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: If2528632fe65c3ed1af19b2ce6f99e8be0cd1ad9 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11kblrvp: Add support for Hynix memoryNaresh G Solanki
Add support for hynix memory variant of RVP3. Change-Id: Ic1f8630b36eb131b70c5e3b620957d9602da11ee Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17339 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11mainboard/intel/kblrvp: Add support to read board ID from ECAamir Bohra
Add a function to identify an Intel RVP board by querying EC Change-Id: I21337000827639fb8f22c5ee9bc5d86f1ebe1e74 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/17283 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11src/vboot: mark factory_initialze_tpm() as staticVadim Bendebury
This function is not used anywhere else in the code. BRANCH=none BUG=none TEST=reef and kevin boards (using tpm1.2 and tpm2.0 respectively) build successfully. Change-Id: Ifcc345ae9c22b25fdcfc2e547e70766021d27e32 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/17387 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-11intel cache-as-ram: Unify stack setupKyösti Mälkki
No need to have %ebx reserved here. Change-Id: I9fe9292ddc610079b876019a71c69af5b1bcf2a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17357 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11intel post-car: Separate files for setup_stack_and_mtrrs()Kyösti Mälkki
Have a common romstage.c file to prepare CAR stack guards. MTRR setup around cbmem_top() is somewhat northbridge specific, place stubs under northbridge for platrform that will move to RELOCATABLE_RAMSTAGE. Change-Id: I3d4fe4145894e83e5980dc2a7bbb8a91acecb3c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15762 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11intel/sandybridge: Use common ACPI S3 recoveryKyösti Mälkki
Fix regression, S3 resume not working on sandy/ivy after commit 9d6f365 ACPI S3: Remove HIGH_MEMORY_SAVE where possible There is some 20ms delay with ACPI S3 wakeup time due to MTRR setup being done after the backup copy. Moving to RELOCATABLE_RAMSTAGE fixes this delay by removing need of this backup entirely. Change-Id: Ib72ff914f5dfef8611f5f6cf9687495779013b02 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15248 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Ic9095ae6812ba822c760229e69f5b27c6c244cdf Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17361 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
Snappy is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Idd702077cd05e2b43823542cb804b2d4b42f7116 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17362 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11soc/intel/common/lpss_i2c: simplify API and use common config structureAaron Durbin
The apollolake and skylake had duplicate stanzas of code for initializing the i2c buses. Additionally, they also had very similar structures for providing settings for the i2c speed control. Introduce a new struct lpss_i2c_bus_config and utilize it in both apollolake and skylake thereby removing the need for SoC-specific structres. The new structure is used for initializing a bus fully as the lpss i2c API is simplified in that lpss_i2c_init() is only required to be called. The struct lpss_i2c_bus_config structure is passed in for both initializing and filling in the SSDT information. The formerly exposed functions are made static to reduce the external API exposure. BUG=chrome-os-partner:58889 Change-Id: Ib4fa8a7a4de052da75c778a7658741a5a8e0e6b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17348 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
BUG=chrome-os-partner:56246 BRANCH=None TEST=Verified kernel is able to talk to the device. Even without the digitizer, no issues observed with the kernel. Change-Id: I894a5f4cd8f6a51e641a2c8f7b1f682ab76712ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17343 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
This brings the I2C frequency down to 400kHz which is spec for fast I2C. BUG=chrome-os-partner:56246 BRANCH=None TEST=Verified frequency in kernel. Change-Id: Ib83c57eec8644903cb9c4b2ab50c94038eb690c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17342 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
Wacom I2C driver can be used by devices other than touchscreen. e.g. digitizer. So there is no need to name the driver with touchscreen specific attributes. Only a separate descriptor name is required that needs to be set by mainboard correctly. BUG=chrome-os-partner:56246 BRANCH=None TEST=Compiles successfully. Change-Id: I0d32a4adae477373b3f4c5f3abbe188860701194 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17341 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10intel/kblrvp: Program I/O expanderNaresh G Solanki
Program I/O expander connected on I2C bus 4 Change-Id: I1a431f50e7b06446399a7d7cb9490615818147e7 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17338 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10drivers/intel/fsp2_0: Add support for recovery MRC hash space in TPMFurquan Shaikh
This space is read/updated only in recovery mode. 1. During read phase, verify if the hash of MRC data read from RECOVERY_MRC_CACHE matches the hash stored in TPM. 2. During update phase, calculate hash of training data returned by MRC and save it in TPM. BUG=chrome-os-partner:59355 BRANCH=None TEST=Verified MRC data hash comparison and update operation on reef. Change-Id: Ifcbbf1bd22033767625ec55b659e05fa7a7afc16 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10vboot: Add support for recovery hash space in TPMFurquan Shaikh
1. Add a new index for recovery hash space in TPM - 0x100b 2. Add helper functions to read/write/lock recovery hash space in TPM 3. Add Kconfig option that can be selected by mainboards that want to define this space. 4. Lock this new space while jumping from RO to RW. BUG=chrome-os-partner:59355 BRANCH=None TEST=Verified use of recovery hash space on reef. Change-Id: I1cacd54f0a896d0f2af32d4b7c9ae581a918f9bb Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17273 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10mainboard/thomson/ip1000: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/thomson/ip1000. Change-Id: Id7b979d2539d4a80609a60464527939c4d449822 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17308 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/supermicro/h8qme_fam10: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/supermicro/h8qme_fam10. Change-Id: Ia03c205ce498eadf8a34749a6a21fb2d0b29c840 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17306 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/supermicro/h8qgi: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/supermicro/h8qgi. Change-Id: I6cf123272283edbf89e854e4aa1a15a2d566133e Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17305 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/roda/rk9: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/roda/rk9. Change-Id: I56fec2a2814ee4b91b11f71dbdca1271792cd0e5 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17302 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/roda/rk886ex: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/roda/rk886ex. Change-Id: I2e88adc444dbbde7a4344829d7bd5a6c9e1f7531 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17301 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/rca/rm4100: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/rcs/rm4100. Change-Id: I8b242eefe796cd93337177fc694ea42c57c53f08 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17300 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
Pyro is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I6de22d7b2d107f3d26ecfadd4e0904e68318e656 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17335 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
tune i2c devices clk for pyro: I2C0: audio da7219 I2C2: TPM H1 I2C3: wacom touchscreen I2C4: elan touchpad BUG=chrome-os-partner:58881 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: If3c92ed260277c27a94d2fcf7883e9441519e40e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I5aee41957c9de7a05f962d3ede74efc6998a78fc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17336 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: Id760251a1b037feb62ec43199a145e407b074769 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/kontron/ktqm77: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/kontron/ktqm77. Change-Id: I47763d1e2bfeee6366ce24b20d874adf7c6f65be Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17299 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-103rdparty/vboot: update to latest masterFurquan Shaikh
Require new recovery reason for rec hash space lock failure in RO. Change-Id: I606d1a1f51a3a4c127b2933f6fb00ba2ec4885fc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17340 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10antirollback: Sync TPM space indices with vboot libraryFurquan Shaikh
BUG=chrome-os-partner:59355 BRANCH=None TEST=Compiles successfully for reef. Change-Id: I27f2e10556214598d479e4a84e8949465e7da7d6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10TPM: Add TPM driver files to romstageFurquan Shaikh
This driver is required for reading and updating TPM space for recovery MRC data hash in romstage. BUG=chrome-os-partner:59355 BRANCH=None TEST=Compiles successfully for reef. Change-Id: I8edb7af13285a7a192e3d55fc6a11cfe12654bf9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17270 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
1. Add RECOVERY_MRC_CACHE region to reef FMAP. 2. Implement helper function for getting event for recovery mode with memory retraining. 3. Select HAS_RECOVERY_MRC_CACHE. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified recovery mode behavior with and without memory training request on reef. Change-Id: I91abc9f8122f1aa3980c6372ab557e56a7a92730 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17243 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10mrc: Add support for separate training cache in recovery modeFurquan Shaikh
1. Re-factor MRC cache driver to properly select RW_MRC_CACHE or RECOVERY_MRC_CACHE based on the boot mode. - If normal mode boot, use RW_MRC_CACHE, if available. - If recovery mode boot: - Retrain memory if RECOVERY_MRC_CACHE not present, or recovery is requested explicity with retrain memory request. - Use RECOVERY_MRC_CACHE otherwise. 2. Protect RW and RECOVERY mrc caches in recovery and non-recovery boot modes. Check if both are present under one unified region and protect that region as a whole. Else try protecting individual regions. 3. Update training data in appropriate cache: - Use RW_MRC_CACHE if normal mode. - Use RECOVERY_MRC_CACHE if present in recovery mode. Else use RW_MRC_CACHE. 4. Add proper debug logs to indicate which training data cache is used at any point. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified that correct cache is used in both normal and recovery mode on reef. Change-Id: Ie79737a1450bd1ff71543e44a5a3e16950e70fb3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17242 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10vboot: Add support for recovery mode with forced memory retrainingFurquan Shaikh
1. Add new function vboot_recovery_mode_memory_retrain that indicates if recovery mode requires memory retraining to be performed. 2. Add helper function get_recovery_mode_retrain_switch to read memory retrain switch. This is provided as weak function which should be implemented by mainboard just like {get,clear}_recovery_mode_switch. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified behavior of recovery mode with forced memory retraining on reef Change-Id: I46c10fbf25bc100d9f562c36da3ac646c9dae7d1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 19:23:34 +0000