summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-10mainboard/google/coral: power off EN_PP3300_DX_LTE_SOC when entering S5Ben Chan
On Astronaunt, after the system enters the S5 power state, there is a 10-second timeout before the system transitions the power state from S5 to G3. The EN_PP3300_DX_LTE_SOC signal, which is controlled by GPIO_78 on the APL platform, remains on during that period. If the system is powered back on before going to G3, the built-in modem won't go through a power cycle as EN_PP3300_DX_LTE_SOC is never de-asserted. Keeping the modem, and indirectly the SIM, powered during a quick system power cycle may sometimes be undesirable. For instance, we would like a SIM with PIN lock enabled to require unlocking each time the system is powered on. After the SIM receives a PIN, it may remain unlocked until its next power cycle. Also, it is often desirable to power cycle the modem when the system goes through a power cycle. For instance, a user may power cycle the system to recover a wedged modem. BUG=b:68365029 TEST=Tested the following on an Astronaunt device: 1. Verify that the modem is powered on after the system boots from cold. 2. Suspend the system to S0ix. Verify that the modem remains powered on when the system is in S0ix. After the system goes back to S0, verify that the SIM with PIN lock enabled doesn't request unlocking, and the modem can quickly reconnect to a network. 3. Configure the system to suspend to S3 instead of S0ix, and then repeat (2). 4. Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: Ie60776d5d9ebc6a69aa9e360bd882f455265dfa2 Signed-off-by: Ben Chan <benchan@chromium.org> Reviewed-on: https://review.coreboot.org/22415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-10device: untangle device_t from struct device some moreAaron Durbin
This further allows compilation units to be re-used without having to add macro guards because of declarations not being around in the __SIMPLE_DEVICE__ case. These declarations are for functions that operate on struct device. struct device is a known type so just expose the functions using the correct type. Also, DEVTREE_CONST is empty while in ramstage so there's no reason to separate the declarations. They compile regardless of stage. Change-Id: Idd4180437d30e7dfaa9f735416c108841e43129f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-11-09soc/amd/stoneyridge: Fix and clean lpc.cRichard Spiegel
Rename set_lpc_resource to set_child_resource. Fix EC child resource not recognized as already set. Remove code that's not needed. BUG=b:62200877 Change-Id: I6e2bf9f8214b5f660084ccd622e3fe2c0cba7656 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-09mainboard/google/zoombini: add dptf.asl and gpio.hNick Vaccaro
Add dptf.asl (copied from reef) to baseboard variant includes, instruct zoombini variant to use the baseboard's dptf.asl, instruct zoombini variant to use the baseboard's gpio.h. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I9aa37f5afc35dab372917a4c84ff3121ec569546 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/22381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-09src/soc/amd/stoneyridge/southbridge.h: Remove unused prototypesRichard Spiegel
Remove unused s3_resume_init_data prototype from southbridge,h BUG=b:68007655 Change-Id: If022f873813070aac6cc9090c2212178a4e66354 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09drivers/i2c/tpm/cr50: Increase init delay to 30 secondsDuncan Laurie
In case the TPM is doing a long crypto operation the initial probe could be very delayed. Rather than end up in recovery make the delay long enough to accommodate the (current) long crypto times. BUG=b:65867313, b:68729265 TEST=Verified that Soraka no longer hangs during EC reboot test. Change-Id: I3bccff70e001dfc065c24be8ad34ef239a144db1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mainboard/google/zoombini: fix EC_SCI_GPI gpio defineNick Vaccaro
Change EC_SCI_GPI to GPE0_ESPI. BUG=b:69011806 BRANCH=master TEST=none Change-Id: I5d07bc0ef295d776635ff3a585c8de9028bd3f6a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/22380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mb/google/{poppy,nautilus,soraka}: Disable deep S3Furquan Shaikh
Poppy and variants won't be using deep S3. This change disables deep S3 option in devicetree. BUG=b:69053636 Change-Id: I5fb4a6a0e4216a3648b5ed888f6dc6618f1a9fc4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22378 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mb/google/fizz: Enable NIC ledsGaggery Tsai
This patch enables customized NIC leds as follows: Green Orange (Amber) 100M off blinking 1000M on blinking BUG=b:65437780, b:68284778 TEST=Make sure the registers are programmed as expected and observe the LEDs are behaving as expected. Perform suspend/resume test and the LEDs are still working as expected. Change-Id: I9bb1367a4c742c2755d620e14ee6dfe70ee7f34b Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-09mainboard/google/kahlee: Move usb_oc.asl into variant/acpiMartin Roth
This compares to the acpi directory in other variants. BUG=b:68293392 TEST=Build and boot kahlee Change-Id: I05d402995b280d6f020bc2575063dbffefa30670 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-09mainboard/google/kahlee: Define MEM_CONFIG3 for Kahlee variantMartin Roth
Even though this GPIO isn't used for Kahlee, it needs to be defined so that the weak version of the variant_board_id() function can compile. BUG=b:68293392 TEST=Build and boot kahlee Change-Id: Ia8daf70fbafe02ec37c6b5eb8421cdb11de3be8b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Add PSP definitions southbridge and iomapMarshall Dawson
Define the PSP's BAR3 and BAR3 enable bit. Define a default base address for BAR3. Change-Id: I59a0ec59b7c6bbc6468b3096ec8d025832349f44 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Add SMU firmware blobs to cbfsMarshall Dawson
Stoney Ridge supports two different sets of SMU firmware, one for either fanless OPNs and one for fanned. Add a Kconfig mechanism to select the proper set and add the blobs into cbfs. BUG=b:66339938 Change-Id: I8510823e2232b74ec6fe001cc28953f53b2aa520 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08soc/amd/common/psp: Add command to load fw blobsMarshall Dawson
An upcoming PSP firmware change will allow coreboot to load the two SMU firmware blobs (one runs in SRAM and the other in DRAM). The traditional method is for the PSP to control most of the process, e.g. loading the SRAM version prior to releasing the x86 reset. Add a new command that can instruct the PSP to load a firmware blob from a location in the flash. The definition for commands 19 and 1a differ from others in that they do not use a command/response buffer. Instead, the PSP will look in the command/response pointer registers directly for the blob's address. BUG=b:66339938 Change-Id: I8431af341930f45ac74f471628b4dc4ede7735f4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Remove fixme.cMarshall Dawson
Move the two functions in fixme.c to places where they make more sense. Coincidentally fix the todo in amd_initcpuio() and use bsp_topmem() instead of explicitely reading the MSR. BUG=b:62241048 Change-Id: Ica80b92f48788314ad290ccf72e6847fb6d039c3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Remove amdlib functions from fixme.cMarshall Dawson
Convert functionality to use coreboot-centric functions and defined values. This change should have no functional effect. BUG=b:62241048 Change-Id: I87b258f3187db4247b291c848b5f0366d3303c75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Add northbridge register macrosMarshall Dawson
Add helpers for determining the D18F1 offset for MMIO base and limit, and I/O base/limit registers. Change-Id: I3f61bff00b8f3ada3e1bbfb163e1f223708bd47d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08google/fizz: add VBOOT_PHYSICAL_REC_SWITCH configShelley Chen
Now that recovery button has been enabled through cr50, we can add VBOOT_PHYSICAL_REC_SWITCH config and treat the recovery button like on any other chromebox. BUG=b:37751915, b:63893483 BRANCH=None TEST=With DUT in normal mode, boot into recovery, press ctrl+d followed by pressing the recovery button. Should successfully boot into dev mode. CQ-DEPEND=CL:737477 Change-Id: I72fb42508083295e317dd06900796dc0cda753f6 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22368 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08payloads/seabios: Update stable from 1.10.2 to 1.10.3Martin Kepplinger
SeaBIOS 1.10.3 was tagged on October 12th, 2017 with the following changes. ``` $ git log --oneline rel-1.10.2..rel-1.10.3 b7661dd tcgbios: Fix use of unitialized variable 6055583 boot: Increase description size in boot menu 3551613 resume: Don't attempt to use generic reboot mechanisms on QEMU ``` Change-Id: I3a9ebf10a55118fc35aed688ea7ec794333c8227 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/22358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-08util/inteltool: Add Skylake definition to MCHBAR readingMaximilian Schander
Taken from * 6th Generation Intel Processor Families for S-Platform Volume 2 of 2 * Page 56 * 332688-003EN Change-Id: I46c8dd77823870b55cc040f7f6c557cb5a2562a1 Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-08util/inteltool: Add PCIEXBAR and PXPEPBAR reading for SkylakeMaximilian Schander
Both registers behave the same as on the previous generation Taken from * 6th Generation Intel Processor Families for S-Platform Volume 2 of 2 * Page 55 and 62 * 332688-003EN Change-Id: Id02a38a7ab51003c9d0f16ebb2300a16b66a15f9 Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-08util/inteltool: Add Skylake DMIBAR register dumpingMaximilian Schander
Register definitions were taken from * 6th Generation Intel Processor Families for S-Platform Volume 2 of 2 * Page 117 * 332688-003EN As well as * 6th Generation Intel Processor Families for H-Platform Volume 2 of 2 * Page 117 * 332987-002EN Tested on a 6th gen skylake mobile cpu and capability registers do match up with the default values. Change-Id: I636f6c3d045e297f1439d3e88e43f41e03db4c8e Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-08util/autoport: Fix VGA register warningMaximilian Schander
The warning is printed using Printf syntax but actually Println is used resulting in printing the format string first and the arguments second: "%s. (%s) Default:%s WARNING: [...]" Change-Id: I411fc47832dd7a82752f233c4909b98190340ccb Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-07mb/google/poppy/variants/nautilus: Enable Dialog DA7219 supportNaveen Manohar
Enable Dialog DA7219 codec i2c device and add required SSDT parameters BUG=b:68686020 TEST=With req'd driver support in kernel v4.4 verify audio on headset Change-Id: Ic815c929f29bec0d26a2981e9933b752c2d84c70 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Shruthi Sudhakar <shruthi.sudhakar@intel.com> Reviewed-on: https://review.coreboot.org/22264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-07mb/google/poppy/variants/nautilus: add nhlt supportNaveen Manohar
Nautilus board uses Dialog da7219 headset codec, Select the appropriate NHLT blob to be packaged in CBFS. Also generate the required ACPI NHLT table for codec and the supported topology in nautilus. Removes unwanted DMIC blob pick for nautilus BUG=b:68686020 TEST=With the required driver support in kernel verify that the Audio plays on headset and recording on headset mic Change-Id: I104889f54da1de38854bcb72aabbc88b739d6c09 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22325 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07soc/intel/kabylake: Add Dialog da7219 NHLT blob supportNaveen Manohar
Add APIs and required parameters for creating Dialog da7219 SSP endpoints in NHLT table. The use of a NHLT table is required to make audio work on the kabylake SoCs employing the internal DSP. The table describes the audio endpoints (render vs capture) along with their supported formats. BUG=b:68686020 TEST=check that NHLT table for da7219 is created properly Change-Id: I57b88873f1c59c8aadf8eec3c80a9d95165a2cc3 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/22324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-07intel/cannonlake_rvp: Clean up GPIO programmingLijian Zhao
Since we move from cannonlake U DDR 4 platform to cannonlake U LPDDR4 platform, it is also critical to revisit the GPIO settings as they are different. Remove unused GPIO setting for old platform, and clean up the native function definition. PAD_CFG_NF can only select NF1,NF2 ..., set to GPIO mode is illegal. TEST=Boot up in chromeos successfully. Change-Id: I0022b791bd8459ea2afdcd0241b603ce81408785 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2017-11-07src/mainboard/intel/glkrvp: Fix Lid switch supportShaunak Saha
SCI trigger logic had to be inverted. This patch enables the system to wake up from S3 when lid is opened when the system is in suspend state.We are trying to match what a external EC card running ChromeEC FW is sending on the signal. TEST = Verified that system wakes up from S3 on toggling lid switch back to open state. Change-Id: Ib42a38088ee028eddc6769921b0552c569da25a9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07util/release: Update genrelnotes script for 4.7 releaseMartin Roth
- Fix initial tool check. - Admit that the script is coreboot specfic. Remove coreboot check. - Fix some whitespace issues. - Get rid of pushd/popd. - Add keywords for section logging. - Move code for getting SLOC into a subroutine. - Find submodules to get patch count instead of having them hardcoded. - Update specific change areas for 4.7 release Change-Id: I115659a75604c24780c09605d7643e83e481f6a1 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/22343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07mainboard/google/kahlee: Add MAINBOARD_FAMILYLann Martin
BUG=b:68865273 Change-Id: Ia2e9b10035e9dd502a563cdf8324ea8ea1922db3 Signed-off-by: Lann Martin <lannm@chromium.org> Reviewed-on: https://review.coreboot.org/22359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READYMario Scheithauer
For internal measurements this mainboard needs a marking inside the NC FPGA when coreboot is ready and payload has been loaded. Change-Id: I37908b21e2a077dec7fa99b0db6d1fd9b6878341 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07src: Fix all Siemens copyrightsMario Scheithauer
Some Siemens copyright entries incorrectly contain a dot at the end of the line. This is fixed with this patch. Change-Id: I8d98f9a7caad65f7d14c3c2a0de67cb636340116 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07mainboard/intel/harcuvar: update to set the HSIO lines configurationJulien Viard de Galbert
Change-Id: Ifc3423ff983fb631edcab087d04742937b25ef86 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/22310 Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07soc/intel/denverton_ns: re-factor HSIO configurationJulien Viard de Galbert
The main goal is to allow configuring the HSIO lines from the mainboard code. Also share the code for both romstage and ramstage. Remove explicit dependency on the harcuvar mainboard. Change-Id: Iec65472207309eae878d14eef5bc644b80fdbb1d Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/22309 Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07device/device_util: Add string for DEVICE_PATH_NONEPatrick Rudolph
Add string for DEVICE_PATH_NONE in dev_path. The enum DEVICE_PATH_NONE can be translated to string and shouldn't be translated by "Unknown device path type: 0". Makes console output a lot prettier and readable. Note: DEVICE_PATH_NONE is used on dummy devices for hotpluggable slots. Change-Id: I08d471d8217f966e80daefe2d9971e357defde62 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-07autoport: Fix nil pointer deref when run without bd82x6xMaximilian Schander
When autoport is run on a system without supported southbridge it won't populate the coresponding data structure. By sanitiy checking after PCI detection autoport can exit cleanly and provide a sufficient error message. Error was: panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x30 pc=0x4be595] goroutine 1 [running]: main.FIXMEEC(0xc42014af80, 0x14, 0xc42014afe0, 0x1a, 0xc4200a914f, 0x4, 0xc4200a916f, 0xf, 0xc420149e60, 0x28, ...) /coreboot/util/autoport/ec_fixme.go:14 +0x105 Change-Id: I6b0fcda76d33b0d3a0379c279f492160ce5add84 Signed-off-by: Maximilian Schander <maxschander@googlemail.com> Reviewed-on: https://review.coreboot.org/22203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-11-07RISC-V boards: Stop using the config stringJonathan Neuschäfer
RISC-V is moving towards OpenFirmware-derived device trees, and the old functions to read the config string don't work anymore. Use dummy values for the memory base and size until we can query the device tree. Change-Id: Ice13feae4da2085ee56bac4ac2864268da18d8fe Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: Use a separate trap stackJonathan Neuschäfer
This is the lazy solution, as explained in the comment, but it works for now. Change-Id: I46e18b6d633280d6409e42462500fbe7c6823b4d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: gettimer: Don't use the config stringJonathan Neuschäfer
Accessing the config string doesn't work anymore on current versions of spike. Thus return dummy pointers until we have a better solution. Change-Id: I684fc51dc0916f2235e57e36b913d363e1cb02b1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: Drop mret workaroundJonathan Neuschäfer
Our toolchain can compile mret now, and once the encoding changes, we'll have to adjust the code anyway. Change-Id: Ic37a849f65195006fa15d74f651a8aa9a9da5b5c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: mprv_read_*: Mark result as earlyclobberJonathan Neuschäfer
This fixes a case of mstatus corruption, where GCC generated code that used the same register for the mprv bit and the result. GCC inline assembly register modifiers are documented here: https://gcc.gnu.org/onlinedocs/gcc/Modifiers.html Change-Id: I2c563d171892c2e22ac96b34663aa3965553ceb3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: Fix return type of mprv_read_u64Jonathan Neuschäfer
Change-Id: I3dc12feefe5f0762e27d2ad0234371e91313c847 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07lib/ramtest: Add commentPatrick Rudolph
Add a comment about the tested RAM region size. Change-Id: I29e99a06777bd21a65aa67049ceede4fd8adb603 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-11-07ec/lenovo/h8: Clear EC output queue before enablementBill XIE
Sometimes (observed on Thinkpad T400s during cold boot) a few (only one observed) garbage bytes may detained in the output queue of EC after power up, and they should be cleared otherwise later communications will be disrupted. Change-Id: Id1733f7350232d0b10ac0d1bc912b62e7fa4da75 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22181 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-07ec/acpi: add mechanisms to clear EC output queueBill XIE
EC's output could be considered as a queue, and sometimes (observed on Thinkpad T400s during cold boot) a few (only one observed) garbage bytes may detained in such queue after power up. Those garbage bytes should be checked and discarded first before real interactions, otherwise they may disrupt the interaction during EC's enablement, causing a locked rfkill. Change-Id: Iee031306c02f5211a4512c6b4ec90f7f0db196ae Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-07Microcode: add dependency to header filesJulien Viard de Galbert
When using microcode header and updating the header (due to a new release of microcode during early development) the build system doesn't detect the header change. This commit fixes this by adding the appropriate dependency. Change-Id: I4211a3e39f67da727ef7cddbbee6d8c4718dee4a Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/22307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07Makefile.inc: Cosmetics: Format blobtool commands similar to other toolsDenis 'GNUtoo' Carikli
Change-Id: Iddb09d0838da119bfccd5443652ca7a6baa95c7b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/22126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-07cpu/intel: Add Intel FCBGA1023 socket supportHal Martin
This socket is used by 2nd and 3rd generation mobile SKUs from 2011-2013. select SSE2 per review suggestion Change-Id: I9306a3364ae15530c99ca3379cfa2057c5879681 Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-06soc/amd/common/psp: Require PSP PCI definition in SOCMarshall Dawson
Remove the definition for the PSP PCI device from the common PSP code. Any APU using this source should have its own definitions, and this allows for the device to move within the config space. Change-Id: Ie41dfa348b04f655640b4259b1aa518376655251 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-06gru: Fix and export SPK_PA_EN GPIO for ScarletJulius Werner
On older Grus, GPIO0_A2 was an audio voltage rail enable line. On Scarlet, we instead moved the audio codec enable (previously on GPIO1_A2) there. Unfortunately the code still had some hardcoded leftovers that were overlooked in the initial port and make our speakers smell weird. This patch fixes the incorrect GPIO settings and adds the speaker enable pin to the GPIOs passed through the coreboot table, so that depthcharge doesn't have to keep its own definition of the pin which may go out of sync. Change-Id: I1ac70ee47ebf04b8b92ff17a46cbf5d839421a61 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-by: Alexandru Stan <amstan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-06endian: Fix bebitenc() to actually encode big-endianJulius Werner
bebitenc() just runs a downward loop over the same body as lebitenc(). That doesn't give you a byte-swapped result, it gives you the same final value, just starting from the other side to fill it in. (Also, it confused i++ and i--, so it really gives you a compiler error.) The correct code needs to have the array index inverted relative to the bit shift index to produce a big endian result. Change-Id: I5c2da3a196334844ce23468bd0124bbe2f378c46 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-06intel/cannonlake_rvp: enable CNVi bluetoothBora Guvendik
Enable USB2 port 10 for CNVi bluetooth. TEST=Boot to OS, verify bluetooth functionality. Change-Id: I5f2390c149bf0de911efac09f54ccd641f51bbcd Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-11-06soc/amd/stoneyridge: consolidate addresses in iomap.hAaron Durbin
Take the existing scattered around address space defines and put them in iomap.h. Change-Id: I78aa1370b05d3e2f90d43f754076b81734cccf7f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-06soc/amd/stoneyridge: start header file for iomapAaron Durbin
Create a new header file, iomap.h, which serves as a single place for providing the address space definitions. Remove the amd_defs.h file that had a single define in it. Change-Id: I1b1aaa8c5d60d670c272ac7131faeb6b3edc1968 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-06mainboard/google/coral: Override VBT selection for astronautren kuo
Current VBT setting for T8 is only 1ms which is under Innolux N116BCA-EA1 panel's spec. Modify T8 to 100ms. (Innolux's panel's spec requires T8 needs to be greater than 80ms) CQ-DEPEND=CL:*496012 BUG=b:67756548 BRANCH=master TEST=emerge-coral depthcharge coreboot chromeos-bootimage Run on DUT and check panel sequence meets spec. Change-Id: I580567decfccd78366c37181255015ac2cd76493 Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/22306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-05util/docker: add support for crossgcc building paramsPiotr Król
In some cases users may want to build just one toolchain not all. This patch introduces COREBOOT_CROSSGCC_PARAM, which by default is set to all_without_gdb so previous behavior is not changed. Users can pass different parameter eg. COREBOOT_CROSSGCC_PARAM=build-x64 to build just x64 SDK. Change-Id: I858ba09644b5b86a4b0e828e4f342aee5083be93 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/22276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-04ec/lenovo/h8/acpi/thermal: Add ACPI fan controlPatrick Rudolph
Disengage the fan 10 degree below passive threshold as the automatic EC fan control does not disengage the FAN even when CPU starts melting ... * Add EC registers FAND and FANA. * Add ACPI methods _AC0 and _AL0. * Add fan device and PowerResource for fan control. Tested on Lenovo T430: * The fan disengages at 80°C and keeps running at full speed until temperature drops below 80°C. * Fan can be disengaged using sysfs: /sys/devics/virtual/thermal/cooling_device0/cur_state Tested on Lenovo T500: * The fan disengages at 80°C and keeps running at full speed until temperature drops below 80°C. * Fan cannot be disengaged using sysfs, but the current state can be read: /sys/devics/virtual/thermal/cooling_device0/cur_state Change-Id: I075ff5c69676927db1c5e731294e18796884f97e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21227 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04ec/lenovo/h8/acpi/thermal: Add support for passive coolingPatrick Rudolph
The ACPI spec requires _TSP, _TC1, _TC2 and _PSL for passive cooling. _TSP already has been added in a previous commit. Copy the coefficients used on google devices to activate the feature. Tested on Lenovo T430: The CPU is throttled once the passive threshold has been reached. Tested on Lenovo T500: The CPU is throttled once the passive threshold has been reached. Change-Id: I922923a9029de77158988ac254bab4aad9536935 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-04cpu/intel/speedstep: Emit PPKG object for first packageNico Huber
Tested on Lenovo Thinkpad T500. Change-Id: I89f1ab4be338841463fb95ac75d794103380d16f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04arch/x86/acpigen: Add function to write a CPU packageNico Huber
Emits a list of CPU cores, e.g. Name (PPKG, Package (2) { \_PR.CP00, \_PR.CP01 }) Tested on Lenovo Thinkpad T500. Change-Id: I10e9ebad84343d1fb282b3fbb28f5f014f664f14 Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04mainboard/google/kahlee: remove unused FILECODE macroAaron Durbin
From what I can tell FILECODE isn't used at all in this file. Remove it. Change-Id: Ie88140e63a4917f470f42119c1fe4e8c7d2584ca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04soc/amd/stoneyridge: don't open code known literalsAaron Durbin
We have macros for register addresses. Use it for MMIO_CONF_BASE instead of duplicating a literal again. Change-Id: I2250ea990bafa234fd5fea48d2690edcfc4982b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04soc/amd/stoneyridge: fix incorrect constants in macrosAaron Durbin
Hex constants need '0x' prefix. Clearly these weren't being used, but they should be fixed properly. Change-Id: I43ab90500b6d5bc31db7ebd1c675d651c8971b87 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04soc/amd/stoneyridge: remove superfluous NULL field initializationAaron Durbin
By definition in C, fields that are not explicitly initialized will be zero'd out. Therefore, remove the redundant struture field initialization. Change-Id: I1b3b2ddf6d2a763e65861a7bcebc6b7cd96691c2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04soc/amd/common: remove superfluous NULL initializers on globalsAaron Durbin
Global variables that are unitialized in C programs reside in the .bss section. By definition, this section is cleared to 0. Therefore, remove the explicit NULL initialization because it's completely unnecessary. Change-Id: I9e7a5a1e2110aa48a5497ab7e2b06676dd557763 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04soc/amd/common: remove use of LibAmdMemFill()Aaron Durbin
memset() exists for a reason. There's 0 reason to duplicate the functionality but add extraneous parameters that do nothing. This is just poor coding practices. Remove LibAmdMemFill() usage. BUG=b:62240746 Change-Id: I18028b38421efa9c4c7c0412a04479638cc9218b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04soc/intel/cannonlake: Add DSP supportLijian Zhao
Add dsp driver support for cannonalake, especially the scan_bus function of Audio controller required. TEST=N/A Change-Id: I573fecedbd4d6619112765c3f2f8baccabeb5ac5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2017-11-04soc/intel/cannonlake: Install common i2cLijian Zhao
Add common i2c support for cannonlake. TEST=N/A Change-Id: I5c60b0579f9e6050308896dcb13dda0bbb724d2b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22238 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04src/mainboard/glkrvp: Fix ec_in_rw and wpShaunak Saha
Change-Id: I513b26d39973d9714b531d1ab0755c66d19eb332 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04soc/intel/apollolake: Fix nhlt blobs path for GLKHannah Williams
Change-Id: Iabea32654918575c952857145ee6edb165899baf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-04cpu: assume SSE if SSE2 is selectedAaron Durbin
If the SSE2 Kconfig option is selected also select SSE. Change-Id: I6ccba57d5ae13b8066f2f744cd739282ffd4fe73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-04sb and soc: Enforce correct offset of member "chromeos" in global_nvs_tJonathan Neuschäfer
The padding has recently been broken in commit 90ebf96df5 ("soc/intel/skylake: Add GNVS variables and include SGX ASL") and fixed again in commit af88398887 ("soc/intel/skylake: Fix broken GNVS offset for chromeos"). Avoid this bug in the future. Change-Id: I1bf3027bba239c8747ad26a3130a7e047d3b8c94 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-04commonlib/helpers.h: Include stddef.hJonathan Neuschäfer
The definition of offsetof() uses size_t, which is declared in stddef.h, according to POSIX. Include stddef.h directly to avoid relying on implicit inclusion. Change-Id: I221be02c332de55c9fcf7d86673709ed43dd5c3c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22230 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-04soc/intel/skylake: Update coding style for i2cLijian Zhao
From comment from https://review.coreboot.org/#/c/22238/, the coding style need to be update. TEST=N/A Change-Id: Id022648951c0f11216aa32f422b5095476f82f8c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-04include: Deactivate timestamp_get if kconfig option not setPhilipp Deppenwiese
If CONFIG_COLLECT_TIMESTAMPS not set all timestamp functions should be deactivated by using a pre-processor statement. Change-Id: I8ac63ba7e4485e26dc35fb5a68b1811f6df2f91d Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04asus/p2b: Move to EARLY_CBMEM_INITKeith Hui
Change-Id: I0bf4d6318ade6e931db4f8b1af08db1f9f93c313 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-11-04soc/intel/apollolake: Move to common dsp driverLijian Zhao
Move dsp driver implementation to common dsp driver. TEST=Boot up and check dsp driver loaded or not in OS. Change-Id: Ia2be1c9f18e0e110600bd56a0b6cb8d40ca5e01f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04soc/intel/common: Add common dsp driverLijian Zhao
Audio DSP pci driver can be common across different platforms. TEST=N/A. Change-Id: Ia9206657864b8795799dc71af54996017c1eec57 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22232 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2017-11-03mainboard/intel/cannonlake_rvp: enable SD cardBora Guvendik
Set SCS SD enable FSP parameter and set card detect gpio information. Change-Id: Ic99466c0d2d59070418d765442ff6d217023803b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03intelmetool: Print colored capabilitiesMaximilian Schander
In general more ME capabilities are considered harmfull, useless or unwanted. Therefore an easy overview can be obtained by coloring in red and green. Taken from Change with id: Ifeec8e20fa8efc35d7db4c6a84be1f118dccfc4a Add bootguard information dump support https://review.coreboot.org/#/c/16328/ Change-Id: Ia911cc935d512174399aaf93bba982e071942212 Signed-off-by: Maximilian Schander <maxschander@googlemail.com> Reviewed-on: https://review.coreboot.org/22217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-11-03intelmetool: Do small cosmetic changesMaximilian Schander
Refining some of the code indentations and cosmetics to build upon and import some in-review changes. Change-Id: I0038a146bd899f150518c4832258a42792abaabb Signed-off-by: Maximilian Schander <maxschander@googlemail.com> Reviewed-on: https://review.coreboot.org/22216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-11-03southbridge: Remove trailing space in `dump_south()` outputPaul Menzel
Change-Id: I4df9f8ce1058a2bb219508d0c8d04e153d37131c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/5179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-03soraka: update pad reset config of WLAN_PE_RST to RSMRSTDivya Chellap
In skylake based platforms, setting GPIO pad reset config to DEEP will reset the gpio configuration across warm reset, set it to RSMRST to preserve the configuration across warm resets. Also, moving the configuration from early to late as appropriate. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I38940b7c7d71e60bf0e51d6978a00be148ad61bc Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-03google/reks: override USB2 Phy settings on BSW D-Stepping SOCMatt DeVillier
Adapted from Chromium commit 12ad5b5: Reks : override USB2 Phy settings... Base on Intel recommendation, override following settings for USB2 port 1/2/3 on BSW D-stepping SOC. 1. Set USB[1] register for right side to 7321 2. Set USB[2] register for left side to 7021 3. Set USB[3] register for CCD to 7021 Original-Change-Id: I04240a010e875f29c47f4fea83ff918f180b0273 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Iabd6312576e9897315c4e4dbf19341380d9d1414 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03google/reks: override RX ODT limit, RAM geometry if neededMatt DeVillier
Adapted from Chromium commit 6ee6f3d: Reks: To set the RX ODT limit... Override RX ODT and DRAM geometry for Micron part MT52L256M32D1PF-107. Use get_ramid() to determine if override is necessary. Original-Change-Id: I41f3aba030a00152e1217533ef953338ac396605 Original-Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Original-Reviewed-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Iea8c3c67e5afb21285dc15ad665474ad5f192423 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03vendorcode/amd/pi/00670F00: remove unused headersMartin Roth
These header files are not used, so remove them. BUG=b:68812513 TEST=Build Change-Id: Ib43fc544186f7b46ecf9b318b9edcf008f2d08dc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03amd/stoneyridge: Clarify SPD structure in chip.hMarshall Dawson
Add #define values and clarify the spdAddrLookup array. Change-Id: I39b9913a2fd52f9105e4a771f651a8d9649202e6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21852 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-03siemens/nc_fpga: Set FW_DONE bit before jumping to payloadWerner Zeh
Once coreboot is ready and payload has been loaded a bit inside the NC FPGA needs to be set to notify this event. As there are NC FPGAs with different PCI device IDs save the BAR0 address in a global variable once the driver evaluates this address. It can then be used to access the register from the boot state machine callback without the need of searching for all possible PCI devices again. As this driver is only used at ramstage there is no need of using CAR_GLOBAL for the global variable. Use a Kconfig switch to make this feature selectable from mainboard as not every mainboard may have a FPGA with that capability. Change-Id: I9cd09e7051edde30d144a7e020b84bb549e9e8b9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03Documentation: add thinkpad/codenames.csvAlexander Couzens
Collect all known codenames for thinkpads. Change-Id: Iae44ceb29675511ec562c275e750087eca5d2f27 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com> Reviewed-on: https://review.coreboot.org/21364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-11-03nb/intel/gm45: Enable LAPIC monotonic timerNico Huber
Change-Id: I9f96561120d0feb44c5edd9e7241bc3456b31e5f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-11-03inteltool: Add southbridge and CPU definitions for SkylakeMaximilian Schander
Change-Id: Id9501f11a79cb314bc407760b22006a3375e669d Signed-off-by: Maximilian Schander <maxschander@googlemail.com> Reviewed-on: https://review.coreboot.org/22211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-03soc/mediatek/mt8173: Remove cast of `NULL*` to `void *`Paul Menzel
`NULL` already has that type in coreboot. ``` src/include/stddef.h:#define NULL ((void *)0) ``` Change-Id: I73aeaef178be8779020c436732952aa732e90c46 Reported-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-03Documentation/Intel/vboot: Fix spelling of *following*Paul Menzel
Change-Id: I26cf3cb049fb5520c59316ff7397b0bcfe6ee48d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-03sb/intel/i82371eb: Consolidate bootblock.c logicKeith Hui
The southbridge bootblock entry point bootblock_southbridge_init() just calls i82371eb_enable_rom() which does all the work. Move all that code into bootblock_southbridge_init() and drop the second function. Plus combine the 3 lines that set 3 bits in XBCS into one. Change-Id: I07a5a28c91da9586e3bdaaf4521cba3f53a5cc01 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-03google/kahlee/acpi: Serialize method _CRSPaul Menzel
ASL+ Optimizing Compiler/Disassembler version 20170831 shows the remark below. ``` dsdt.aml 87: Method (_CRS, 0x0, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized \ (due to creation of named objects within) ``` So, serialize the method. Fixes: commit 4a51ea8470 (google/kahlee: Add ASL for Elan touchpad) Change-Id: I664f493318cbfd80d91565c0d29ec918278c4906 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03drivers/intel/fsp2_0/hob_verify: Correct conversion specifierPaul Menzel
Use the correct conversion specifier for `size_t` to fix the error below. ``` src/drivers/intel/fsp2_0/hob_verify.c:31:4: error: format '%lx' expects \ argument of type 'long unsigned int', but argument 4 has type \ 'size_t {aka unsigned int}' [-Werror=format=] "FSP_BOOTLOADER_TOLUM_SIZE: 0x%08llx < 0x%08lx\n", ^ range_entry_size(&tolum), cbmem_overhead_size()); ~~~~~~~~~~~~~~~~~~~~~ ``` Found-by: gcc (Debian 7.2.0-8) 7.2.0 Change-Id: I4631672211095f9934925e9bd230ccbf63c736af Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03soc/intel/quark/spi: Correct conversion specifierPaul Menzel
Use the correct conversion specifier for `size_t` to fix the error below. ``` from src/soc/intel/quark/spi.c:18: src/soc/intel/quark/spi.c: In function 'xfer': src/soc/intel/quark/spi.c:107:20: error: format '%ld' expects argument \ of type 'long int', but argument 3 has type 'unsigned int' \ [-Werror=format=] printk(BIOS_ERR, "bytesin > %ld\n", sizeof(ctrlr->data)); ^ ``` Found-by: gcc (Debian 7.2.0-8) 7.2.0 Change-Id: I3974d116e85715086a2bd5533a80a20c4cc43303 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03.gitignore: Do not track `util/cbfstool/cbfs-compression-tool`Paul Menzel
Change-Id: I0d5ec1b90921d63fc5db089002f3e132c5549472 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03arch/x86/gdt: Move variable assignment downPaul Menzel
The Clang Static Analyzer warns about an unused assignment, when building the image for the Lenovo X60. ``` src/arch/x86/gdt.c:39:6: warning: Value stored to 'num_gdt_bytes' \ during its initialization is never read u16 num_gdt_bytes = (uintptr_t)&gdt_end - (uintptr_t)&gdt; ^~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ``` If `CONFIG_RELOCATABLE_RAMSTAGE` is selected, the function returns before the assignment is used. So, move the assignment below the if statement. Change-Id: Ibcb8bce743d8cb3625647804816fb97f937dc429 Found-by: clang version 4.0.1-6 (tags/RELEASE_401/final), Debian Sid/unstable Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03mainboard/google/kahlee: Prepare for variantsMartin Roth
Move files that are particularly specific to the mainboard into the variant directory. Files that only have small areas of mainboard specific pieces use #if to separate between the boards. Add memory.c to split out the variant board id into a weak function. Add baseboard/gpio.h to satisfy the build - this will be updated in the next commit. BUG=b:68293392 Change-Id: I7c1beb45f571f2547f3b5b0d7ec78923d0cec761 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 23:19:10 +0000