summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-31mainboard/google/kahlee: Add careena variantMartin Roth
Add Careena variant, based on the grunt board. BUG=b:80106042 TEST=Build Careena Change-Id: I87a24f6d8115aacf5b21181f3820cf2718ad252a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-31mb/google/poppy/variants/nocturne: configure the FPMCU interfaceVincent Palatin
The FPMCU is using the standard cros-ec-spi interface on GSPI1. Configure the GPIOs controlling the MCU too. We need to be able to wake from S3 on the MCU interrupt, re-configure GPE0 DW0 to point to GPP_C bank. BRANCH=poppy BUG=b:79666174 TEST=exercise the cros_ec interface, e.g. 'ectool --name=cros_fp version', verify the MKBP events by doing 'ectool --name=cros_fp fpmode fingerup' then 'ectool --name=cros_fp waitevent 5 10000', toggle the other GPIOs with the flash_fp_mcu script. Change-Id: Ib417dcf84cda8e354060785cd16a7b6b812148d5 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/26684 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31soc/{amd,intel}: Use CACHE_ROM_(BASE|SIZE)Nico Huber
Boards could choose a high ROM_SIZE that would result in an MTRR config that conflicts with other resources. Thus, always use the filtered CACHE_ROM_SIZE. Change-Id: I66d36b84ce49c1cb98cb36a4731977baaedf3225 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31{cpu,drivers,nb,soc}/intel: Use CACHE_ROM_BASE where appropriateNico Huber
Change-Id: Ibc2392cd2a00fde3e15dda4d44c8b6874d7ac8a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-31cpu/x86/mtrr: Prepare for ROM_SIZE > 16MiBNico Huber
Most, if not all, chipsets have MMIO between 0xfe000000 and 0xff000000. So don't try to cache more than 16MiB of the ROM. It's also common that at most 16MiB are memory mapped. Change-Id: I5dfa2744190a34c56c86e108a8c50dca9d428268 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26567 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
As far as I can see this Kconfig option was used wrong ever since it was added. According to the commit message of 107f72e (Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary to prevent overlapping with CAR. Let's handle the potential overlap in C macros instead and get rid of that option. Currently, it was only used by most FSP1.0 boards, and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?). Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-31soc/intel/skylake: Select common P2SB codeSubrata Banik
This patch select CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB to include common p2sb code block. BUG=b:78109109 BRANCH=none TEST=Build and boot EVE. Change-Id: I3f6aa6398e409a05a35766fb7aeb3aa221dd3970 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26165 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31Remove VIA vt8237r southbridge supportKyösti Mälkki
Change-Id: I2d0400212d32c4dee71163d2f5919c290b8c0616 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove VIA C7 CPU supportKyösti Mälkki
Change-Id: Ib8c943e01ac293bdbf37f43ff72dbb636b46a8af Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove VIA C3 CPU supportKyösti Mälkki
Change-Id: Ib33c05cec60238f17b68e3e729c1a9e125bfb179 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove VIA VX800 northbridge supportKyösti Mälkki
Change-Id: Id6026e9d7ff064d54b0dd93e80dabdcc4efd2b8e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove VIA CX700 northbridge supportKyösti Mälkki
Change-Id: Id46e3d40393598f6b03ae4fd3186182635f072ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove VIA CN700 northbridge supportKyösti Mälkki
Change-Id: I6c33d35718cc445ce67fc625d71420ded3828d8b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31mb/via/epia-m700: Remove boardKyösti Mälkki
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: I34f9bffcced5ccdd8691994b78fffed057021d0e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31mb/via/vt8454c: Remove boardKyösti Mälkki
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: Ic135c3f8eb18818d0ae3b63f53b542905815bbd0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove all VIA CN700 boardsKyösti Mälkki
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: I06840476ad187cbb6e6af554b5c8e8c4d66f6624 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-31Remove AMD K8 cpu and northbridge supportKyösti Mälkki
Change-Id: I9c53dfa93bf906334f5c80e4525a1c27153656a3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-31Remove southbridges after K8 board removalsKyösti Mälkki
Change-Id: Ib6935c026e2302b037fc82be64163f10bf775751 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-31Remove all AMD K8 boardsKyösti Mälkki
Platforms with LATE_CBMEM_INIT were agreed to be removed with 4.7 release late 2017. Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-31mb/msi/ms9652_fam10: Fix dependency on amdk8/util.aslKyösti Mälkki
Change-Id: I0bb515fbf7b1ae9b0dd1b61bad0c45a7f38d6767 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-31AGESA binaryPI: Remove dependency on K8 headersKyösti Mälkki
The included .c file also pulled in ancient files amdk8/pre_f.h and amdk8/raminit.h Do a dirty copy-paste to work around that. Change-Id: Ie89a5f91d5234f1ef334d30a43dd56e0b722b5ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-30util/docker: Fix file ownership when building with coreboot-sdkMartin Roth
Instead of requiring the user to enter their root password to set the created files to their user, create a new user inside the docker container with the correct UID & GID and build with that. Change-Id: Ibbeff00211e8cf653f48204d285e06bca39b5fd2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-30checkpatch: exclude util/crossgcc/patchesPatrick Georgi
These files are supposed to contain trailing whitespace due to the patch format. Also use the exclusion list in the pre-commit hook. Change-Id: I8816c05ea703964a332915a0675096836957b242 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/26695 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-30util/gitconfig: improve robustness of checkpatch in pre-commitPatrick Georgi
Users can have non-default configurations as to how git diff et al are presenting file names in diffs (default: a/ and b/ prefixes). checkpatch expects that and trims the first element, so enforce that configuration for the diff that's sent into it. Change-Id: I099795119456a73c900b31ce191c2d9e898a5c7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/26694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-30mainboard/google/kahlee: move grunt's chromeos.fmd to baseboardMartin Roth
The chrmoeos.fmd file will be common across variants, so move it out of of grunt directory and into the variants/baseboard directory. BUG=b:80106042 TEST=Build grunt Change-Id: I259d85f60c5e19e00f7d9149542bcfdcc6dfaf4f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-30mainboard/google/kahlee: move SPDs to variants/baseboard/spdMartin Roth
The SPD files will be common to many of the mainboards, so move them out of grunt and into the variants/baseboard directory. BUG=b:80106042 TEST=Build grunt, make sure spd.bin is the same. Change-Id: I53975a46a8c7d7e519bb6f7ef6ccd0b817ac4c92 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-30Documentation: Update index.md and move filesPhilipp Deppenwiese
* Add more subdirectories and index.mds. * Move "getting started" and "lessons" into sub-directories. * Move "NativeRaminit" into northbridge/intel/sandybridge folder. * Move "MultiProcessorInit" into soc/intel/icelake folder. * Reference new files Change-Id: I78c3ec0e8bcc342686277ae141a88d0486680978 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26262 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-30soc/intel/cannonlake: Enable IDT and expection handling support for all stagesAamir Bohra
Change-Id:I4146a040e5e43bed7ccc6cb0a7dc2271f1e7a8ea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/26661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-30libpayload-x86: i8042: fix i8042_data_ready_ps2 and i8042_data_ready_auxHannah Williams
keyboard_disconnect was called without keyboard_init being called and in this case keyboard_havechar returns true because i8042_data_ready_ps2 is dereferencing uninitialized variable ps2_fifo from within fifo_is_empty causing keyboard_disconnect to be stuck in this while loop. while (keyboard_havechar()) keyboard_getchar(); BUG=b:80299098 TEST=Check if the normal mode path in depthcharge is not causing a hang Change-Id: I944b4836005c887a2715717dff2df1b5a220818e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/26590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-29src/northbridge: Add and update license headersMartin Roth
This change adds and updates headers in all of the northbridge files that had missing or unrecognized headers. After this goes in, we can turn on lint checking for headers in all northbridge directories. Change-Id: I8cd7c04ddb8e58946dcdf9c7c125e23698647a73 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-29src/southbridge: Add and update license headersMartin Roth
This change adds and updates headers in all of the southbridge files that had missing or unrecognized headers. After this goes in, we can turn on lint checking for headers in all southbridge directories. Change-Id: I09614730bfd4db923dda103bd07bab02836a4c92 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-29src/soc: Add and update license headersMartin Roth
This change adds and updates headers in all of the soc files that had missing or unrecognized headers. After this goes in, we can turn on lint checking for headers in all soc directories. Change-Id: I8b34dcd10c692f1048bd8d6c0fe3bfce13d54967 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-29chromeec platforms: Update ACPI throttle handler callMartin Roth
Currently the throttle event handler method THRT is defined as an extern, then defined again in the platform with thermal event handling. In newer versions of IASL, this generates an error, as the method is defined in two places. Simply removing the extern causes the call to it to fail on platforms where it isn't actually defined, so add a preprocessor define where it's implemented, and only call the method on those platforms. Change-Id: I6337c52edaf9350843848b31c5d87bbfca403930 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-29mainboard/hp/dl145_g1: Remove empty WAK ACPI methodMartin Roth
Change-Id: I16cdf2781ce1bf9458300de70a87a3bb98d01636 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-29southbridge/intel/bd82x6x: Remove unused argument from ACPI methodMartin Roth
The method POSC was only using 2 of the 3 arguments passed in to it. Remove the unused argument. Change-Id: I6bbc2a034c79581fd338276eea56aac6d1affa58 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-29sb/intel/{bd82x6x,ibexpeak}: Fix out of bounds access in intel_me_status()Nicola Corna
On Ibex Peak (and maybe also on other platforms), when the AltMeDisable bit is set (-S or -s option of me_cleaner), the ME PCI device disappears from the bus and its configuration space is all ones. This causes a freeze in intel_me_status(), as coreboot tries to access an out of bounds array element. Change-Id: I957abebe1db15ec2c9a2b439f0103106bfa56b33 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/26601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-28arch/x86: Define HPET_ADDRESS_OVERRIDEKyösti Mälkki
Symbol defined in via/cx700 but also used elsewhere. Change-Id: I31d6043e71dea474de00f609b9609a628ecc6eb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-28fsp_broadwell_de: Select TSC_MONOTONIC_TIMER by defaultDavid Hendricks
This is currently selected by each derivative board's Kconfig even though it's really an SoC-specific option. Change-Id: Iad135261915a0857c53c18aaebde7e46c97a8f40 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/26344 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-28soc/intel/apollolake: Don't use pulldowns in standby state for 1.8/3.3V pins.Shamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIOTermination Configuration. Furthermore, some of these pins were configured with normal termination of None which would as per above mentioned document lead to a standby termination of None anyways. Instead of pull downs, use the IOSSTATE setting for driving low via the Tx mode. BUG=b:79874891, b:79494332, b:79982669 BRANCH=None TEST=Flashed image and booted to OS on Yorp. Touchscreen does not consume power in suspend state. Change-Id: I7dcf3691b969d018b3cfb6af3f7467c9b523fee5 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/26491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-28intel/skylake: nhlt: Update Max98373's capture formatSathyanarayana Nujella
Max98373's NHLT capture configuration is used for IV feedback for DSM algorithm. Feedback is 4-channel data. Without this configuration below error is seen in dmesg: [ 315.784250] snd_soc_skl 0000:00:1f.3: Blob NULL for id 0 type 3 dirn 1 [ 315.784263] snd_soc_skl 0000:00:1f.3: PCM: ch 4, freq 48000, fmt 32 So, update nhlt configuration accordingly. BUG=b:79362472 TEST=Audio playback works with IV feedback enabled Change-Id: I75434a63fe030ed9bb963c6d300d833a8e7d2d66 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26384 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-28drivers/i2c/max98373: update DT property namesSathyanarayana Nujella
Upstream Kernel side codec driver expect DT properties to have 'maxim' prefix. Update accordingly while filling SSDT entries. BUG=b:79362472 TEST=dump DT properties in kerenl side and cross checked TEST=Audio playback works with this change Change-Id: Iaa4b14492dbb5a0087242f1485493f3192336f60 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-28acpi: device: Walk up the tree to find identifierDuncan Laurie
Instead of just checking the immediate parent for an device name, walk up the tree to check if any parent can identify the device. This allows devices to be nested more than one level deep and still have them identified in one place by the SOC. The recursive method calling this function has been changed to handle a null return from acpi_device_name and abort instead of continuing and perhaps forming an invalid ACPI path. Change-Id: Ic17c5b6facdcb1a0ac696912867d62652b2bf18e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-28soc/intel/quark: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I102c9b9b1066064589149388d5ebbcd6d0d81fa7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-28soc/qualcomm: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ib7bcfefaecc053a1ed28d708a614acb81207bccf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-28soc/nvidia: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I065ed3a0deab2f59e510717f5d52beb2a62e900d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-28Documentation: More markdown fixes after switching to sphinxPatrick Rudolph
Fix markdown code to work with sphinx. Change-Id: I52014494dc2d09731fe14ab527073352ada860d1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26544 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-28Documentation: Add HP Compaq 8200 and NPCD378Patrick Rudolph
Change-Id: I56db0cc11cfa5a1a537091553393542312d4f212 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26543 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-27soc/intel/cannonlake: Select common XHCI codeSubrata Banik
This patch select CONFIG_SOC_INTEL_COMMON_BLOCK_XHCI to include common xhci code block. BUG=b:78109109 BRANCH=none TEST=Build and boot cnlrvp Change-Id: I7f1e59792159dae5835fbbe7fcb1604fc01893ba Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-27grunt: Wire up the EC SMI handlerRaul E Rangel
This won't actually get called yet since the GPIO pin has not been configured as SMI. BUG=b:80295434 TEST=grunt: Made sure events could be processed. Change-Id: I189e26196e4543b3e34bff5d9df8566eff07d585 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-27amd: Don't call halt() when in SMMRaul E Rangel
This copies what Intel does. BUG=b:80295434 TEST=grunt: Made sure that the S5 SMI interrupt gets fired. Change-Id: I7874824cad01054c6bdeff12d248e671f27be030 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
The default interrupt control for GPIO pins within stoneyridge is for edge triggered, high. However, sometimes these need to change, or maybe the interrupt needs to be reported or delivered. This was the case of platform grunt, where the interrupt related bits were being changed afterwards. Ideally all the bits should be programmed through the same procedure. Create several PAD_INT definitions (for general configuration, for trigger configuration and for interrupt type configuration) and change function sb_program_gpios() to accept the output from PAD_INT_XX and program all the necessary bits while keeping compatibility with other PAD_XX definitions. BUG=b:72875858 TEST=Add code to report GPIO and interrupt configuration, build grunt and record a baseline. Add new code, rebuild grunt and record a test output. Compare baseline against test, there should be no change in GPIO or interrupt programming. Remove code that reports GPIO/interrupt configuration. Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-26mainboard/intel/dg41wv: Fix lint check errorMaulik V Vaghela
Fix lint error due to non-ASCII characters BUG=none BRANCH=none TEST=check if no error in checkpatch.pl script. Change-Id: Iec7682e460c8e0d467a70349a23390554cc1de92 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26562 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-26mb/intel/dg41wv: Add mainboardArthur Heymans
This board was used a test target for the x4x DDR3 raminit patches and has an easy to access DIP8 socket. What is tested and works: * S3 resume * PEG, PCI, USB, SATA * Sound * Ethernet * Native graphic init (textmode and linear fb) on the VGA output * Passing memtest86+ with 2 2Rx8 4G dimms * PS2 Keyboard * Flashing coreboot internally from vendor BIOS. What does not work: * Running dram at 533 MHz (limited at 400MHz currently) Tested with two 4G dual rank DDR3 dimm, booted SeaBIOS and Linux 4.10. Change-Id: If01bf658e52d273c3c203d362f21c3cb9c623f40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20003 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/poppy/variants/nami: Perform PL2 setting in variant_devtree_udpateFurquan Shaikh
This change moves PL2 override to variant_devtree_update for two reasons: 1. This function was added to basically override devtree settings in variant specific code. So, it would be a good idea to perform all the overrides in a single place. 2. Adding a device for performing nami_enable would require changes to devicetree and special handling for calling this device enable. Thus, nami_enable was never getting called. BUG=b:80148703 Change-Id: Ifa24a7b6e99cad2368b3d656a757f26297373121 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25sb/intel/common/pirq_gen: Rework generating pin-route tablesArthur Heymans
This creates a pin-route matrix first and then generates the ACPI entries based on that. This approach has the advantage of being simpler (no need for checks on double entries) and requiring less access to the pci config space. A few thing that are also fixed: * Don't declare DEFAULT_RCBA redundantly. * Only loop over PCI devices on bus 0 * Add a license header to rcba_pirq.c * Remove inappropriate use of typedefs * Fix the pin field: needs to be a byte * Fix the source field: it should either be a byte or a path (according to Advanced Configuration and Power Interface Specification rev 2.0c) Change-Id: Ic68a91d0cb55942a4d928b30f73e1c779142420d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22979 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/reef: fix indention in memory.cAaron Durbin
In cbdbf018 (mb/google/reef/variants/: Add new memory ID) a new memory configuration entry was added. However, it was using spaces for indention. Correct that. Change-Id: Iaf788b0ad8a6ef3b001e7f29a6710e6e8f731ecf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/26513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-25elog: Only log POST code from previous boot on non-S3 resumeDaniel Kurtz
It doesn't make sense to log post codes from a previous (failed) boot if we are resuming from S3, since the previous boot has to have been successful in order to enter S3 in the first place. While we are at it, use a helper function to combine conditionals and improve readability. BUG=none TEST=boot, suspend & resume grunt Change-Id: I4f3bb8526a0c8c0ea1efd924628b33c147543b88 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26528 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Only print TYPE_BOOT on S3-resume if CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Previously, we were unconditionally adding a TYPE_BOOT message to the ELOG on every boot (even S3 resume) if CONFIG_ELOG_BOOT_COUNT was disabled. Now that boot_count_read() returns 0 for the !CONFIG_ELOG_BOOT_COUNT case, the code becomes a bit simpler. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I803fa4c3e03b6cc94751cf0ce34b78021ae2124e Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26527 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Allow calling boot_count_read() without CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Have boot_count_read() just return 0 if CONFIG_ELOG_BOOT_COUNT is not enabled. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I70f16226371324dea37b3f36f85c2037e324ef31 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26526 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25soc/amd/stoneyridge: Increment boot_count on non-S3 bootsDaniel Kurtz
Increment the boot_count from romstage when not resuming from S3. BUG=b:80266624 TEST=firmware_EventLog TEST=boot, then: mosys eventlog list | grep boot 1 | 2018-05-24 16:51:42 | System boot | 1 reboot mosys eventlog list | grep boot 1 | 2018-05-24 16:51:42 | System boot | 1 6 | 2018-05-24 16:52:34 | System boot | 2 Change-Id: Ideec9da809e494fb0ea073f648540285972f8238 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26525 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25soc/amd/stoneyridge: Record ACPI Wake events in ELOGDaniel Kurtz
We are already reporting the Wake source, but we must also report the ACPI wake itself. BUG=b:79865267 TEST=firmware_EventLog Change-Id: Id26dff46379800a63ab9b77f135d23c6382f77e6 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26522 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/poppy/variants/nami: Use GPP_E4 for BT_OFF#Frank Wu
The BT W_DISABLE2# pin is connected to GPP_E4 in the latest schematic. Update GPP_E4 as GPO and set 1 as default. BUG=b:79993692, b:72007632 BRANCH=None TEST=Enable/disable BT/WLAN by following command. Enable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000201 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000201 Disable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000200 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000200 Change-Id: I9ef1a5314652ab29172d246abd58ee4e1a8a6299 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26502 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/kahlee: Init APU_BIOS_FLASH_WP_L GPIO to reset stageDaniel Kurtz
GPIO APU_BIOS_FLASH_WP_L is first read in ROM stage to determine the state of the BIOS FLASH Write Protect signal at boot. The result of this read accumulated in the vboot state that's passed on to the upper layers of the stack. Therefore this GPIO must be configured as a "reset stage" GPIO, not a "RAM" stage GPIO. BUG=b:79866233 TEST=firmware_WriteProtect Change-Id: I1d96ab4bbfeaf9db9f74cf0c58cbab2104079bf7 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26498 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25device: Move find_dev_path() to device_const.cKyösti Mälkki
Change-Id: I8a27aa7157b5706623272ba9354ed8dff9b8184f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25device: Move dev_find_path() to device_const.cNico Huber
Make it available early and use it in dev_find_next_pci_device(). Change-Id: I1d0ad07f37ea79dae2b9a592fcccba5e03fd86d5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-25device: Rename device_simple.c --> device_const.cNico Huber
In early stages (pre ramstage), we have two notions of devices. To access the hardware, "simple device" handles are used. These are plain numbers. To access the static information of the device tree, we use `struct device` pointers. This is referred to as DEVTREE_EARLY in the code. This file is about the latter and its name reflects that the tree remains unmodified. Change-Id: I31aeb118615e86026f7111f83a7866d4e7426170 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25soc/intel/cannonlake: Reduce STACK_SIZE to 4KiBSubrata Banik
TEST=Build and boot cannonlake rvp till OS. Change-Id: I5369afd0d1d66e25d210416730a2c1c91ca8e94a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25drivers/intel/fsp2_0: Make use of xmalloc for FSP-S UPDSubrata Banik
Don't allocate FSP-S UPD over stack. This patch reduces stack usage for Cannonlake platform. TEST=On CNL platform stack usage reduces from ~3.6KiB to ~1KiB. Change-Id: I07ef0db6720d7e6865ac1641ce2661009332907c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26501 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24buildgcc: Do not try to install GCC if build failedNico Huber
We didn't bail out if configuring or building of GCC failed but run `make install` and later steps instead. This resulted in very confusing logs that concealed the actual error. Change-Id: Ia064e0bfd96f0cbad391da3bb19e4dc304d988ff Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26496 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24soc/intel/baytrail: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8b2cfe3e2090fb8eed755e40d337c6049d8dd96e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24nb/intel/fsp_sandybridge: Fix lost const qualifier on 'device_t'Elyes HAOUAS
Missing '*const' in Change #26195 added into function northbridge_get_tseg_base(void). Change-Id: Ideb9a9cb98d34f2ed1034b8ee20b3b06aa5ff1e2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26455 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24sb/intel/i82801ix: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iefef4e72f1012c8a6edbb9e5c94bdc162bed93d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/intel/i82801jx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I37be7672c88b28180d7d4b46928ebed8472ec020 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/intel/fsp_i89xx: Get rid of device_tElyes HAOUAS
Use of device_t is discouraged unless necessary. Change-Id: I89f9fe94c1e3e5c2b183572d7f603d016d0f0e1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24Remove leftover Intel CPU supportKyösti Mälkki
Change-Id: I6ac67137d5f5c63dbc4fc54eacb3e326ccf423d4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24mb/hp: Add new port compaq_8200_elite_sffPatrick Rudolph
Add new port based on autoport. The board uses a NPCD378 SuperIO, that is full of custom hardware. The 8MiB flash SOIC-8 can be accessed after cutting of a part of the DIMM slot holder. The flash IC has no diode, powering a part of the board while flashing externaly, including the Standby-LED. The following have been tested and is working: * Native raminit with up to four DIMMs * Libgfxinit on DisplayPort * USB * EHCI debug * Serial on RS232 * Ethernet * PCIe on x4 * PCIe on x16 * SATA * Booting GNU Linux 4.14 using SeaBIOS 1.11.1 as payload * Flashing internaly * PS/2 is working Untested: * PCI slot * LPT port * VBIOS * S3 resume Not working: * PSU fan managment (runs at 100%) * Half of SuperIO functionality is unknown TODO: * Reverse engineer remaining SuperIO registers * Reverse engineer SMM Fixes on follow-up commits: * Added PSU fan control * Reverse engineered some of Super IO's HWM registers * Added SMBIOS tables for IPMI Change-Id: I4ee8da6349222fda8b6c30a7210ffdd65c183439 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/25385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24AMD geode/lx: Remove generic_sdram.c includeKyösti Mälkki
The file under lib/ will be removed with K8 and Geode LX is the only other platform using it. Change-Id: Id49d72358ecfc4aae4980e3ae787952073e5c838 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24AMD: Remove some leftover includesKyösti Mälkki
Change-Id: I740d945693b4f16495488fb76ad6d1ee531185ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24mb/gigabyte/ga-h61m-s2pv: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux with latest kernel. This code is based on the output of autoport as well as existing ga-b75m-d3h and ga-b75m-d3v mainboards. Working: - Serial port I/O - S3 suspend/resume (broken with SeaBIOS 1.11.1) - USB ports and headers - Gigabit Ethernet - Integrated graphics (libgfxinit) - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit (4+4GB, 4+2GB, 2+2GB, DDR3-1333) - Native graphics init with libgfxinit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. - NVRAM settings. Only `gfx_uma_size` and `debug_level` have been tested with values different from the default. Untested: - VGA BIOS for integrated graphics init - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. - PS/2 ports - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - SATA devices with Tianocore (payload issue) - PCIe to PCI bridge. It seems to be poorly supported on Linux, it lacks a public datasheet and vendor BIOS behaves in the same way: The bridge and the devices behind it appear, but drivers fail to find devices attached to the bridge. Change-Id: I598a0b75093a0f1aef2ac615035d66786a8c22cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/25912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-24Remove leftover AMD CIMX RD890 northbridge supportKyösti Mälkki
Change-Id: I3f2cea79a11a52e94f479b25f22eb3726af38fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover AMD CIMX RD890 vendorcodeKyösti Mälkki
Change-Id: Ic7d80b25c0815f3816ae40646d024e0d9fe61f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover VIA vt82c686Kyösti Mälkki
Change-Id: Id215fb22c3cf1890fd001e2f7a9a7bd0105c1747 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover Intel i82801b supportKyösti Mälkki
Change-Id: If85d73745ec858155c501aa637fd27a62a41dd68 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover Intel i82801a supportKyösti Mälkki
Change-Id: Ibcecd34d552cd1a4d945c74996d47223a39dc5c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24nb/amd/amdfam10: Get rid of device_tKyösti Mälkki
Change-Id: Iac6be374842063cc383af20c73900e3699a72653 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/amb/rs780: Get rid of device_tKyösti Mälkki
By mistake this was forgotten from previous commit touching the same directory. Change-Id: I23e3e579ccbcb8a251cdde11215ec171b78b7159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26494 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/packardbell/ms2290: Get rid of device_tKyösti Mälkki
Change-Id: I42b19d660b681cca8fea7d2f52b43c8daceb5e35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24mb/emulation/qemu-q35: Get rid of device_tKyösti Mälkki
Change-Id: I74461e75abce6cdd0c7a16b3a6589de3486a1a3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24nb/intel/x4x: Adapt post JEDEC for DDR3Arthur Heymans
Change-Id: I708f98dc2f36af73bb5933d186b4984649e149a1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x/raminit: Add DDR3 enhanced mode and power settingsArthur Heymans
Change-Id: I9d34154d3ac1dd1e5400d692d4dcce70d95662c8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x/raminit: Add DDR3 specific dra/drb settingsArthur Heymans
When programming the final dram attribute and dram boundary settings, on DDR3 dram one also needs to enable ZQCAL in the CxREFRCTRL (DRAM Refresh Control) register as documented in "Intel ® 4 Series Chipset Family" documentation. Change-Id: I11a79f6800dbfe19c2bd33c0d6caca14b034e384 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-24nb/intel/x4x: Implement write levelingArthur Heymans
DDR3 adapted a fly-by topology which allows for better signal integrity but at the same time requires additional calibration. This is done by settings the targeted rank in write leveling mode while disabling output buffer on the other ranks. After that the DQS signal gets sampled over DQ until a transition from high to low is found. Change-Id: I695969868b4534f87dd1f37244fdfac891a417f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x: Add DDR3 JEDEC initArthur Heymans
Add DDR3 JEDEC init (Power up and Initialization by setting emrs regs) This also modifies the send_jedec_cmd function as DDR3 dimms can have ranks mirrored which needs to be accounted for. The ddr3_emrs1_config array is placed externally since it is also needed for write leveling. Change-Id: I510b8669aaa48ba99fb4dcf1ece716aef26741bb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24device: Always build device_simple.c for less code duplicationNico Huber
Change-Id: Iec0a11d67d7641996f26b3a01352be762006ebb6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24src: Add space after 'while'Elyes HAOUAS
Change-Id: I44cdb6578f9560cf4b8b52a4958b95b65e0cd57a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-24mb/intel/glkrvp: Remove unused DPTF_CPU_ACTIVE_ACx definesSumeet Pawnikar
GeminiLake platform is fan-less design. We do not need these DPTF_CPU_ACTIVE_ACx defines. Removing these for GeminiLake RVP board as these are not being used. Change-Id: I810809bf58198a028e6cfcdbd68887f5f154a0ad Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/26469 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/google/reef: Remove unused DPTF_CPU_ACTIVE_ACx definesSumeet Pawnikar
ApolloLake based reef platform is fan-less design. We do not need these DPTF_CPU_ACTIVE_ACx defines. Removing these from all reef variants as those are not being used. Change-Id: Id3cb7f7826a5e02cf447c70ab5cdc9b5d86982ca Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/26468 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24src: Remove space after `defined`Elyes HAOUAS
Change-Id: If450a68e98261ffba4afadbce47c156c7e89e7e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26460 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24nb/intel/sandybridge: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If36a879fbe7a93a214d74dbfa6fb3ee2d09a044a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24chromeec: Add support for controlling USB port powerEmil Lundmark
This maps a bit field to the EC (EC_ACPI_MEM_USB_PORT_POWER) that can be used to control the power state of up to 8 individual USB ports. Some Chromeboxes have their GPIO pins for controlling USB port power wired to the EC, so they cannot be accessed directly by coreboot. Change-Id: I6a362c2b868b296031a4170c15e7c0dedbb870b8 Signed-off-by: Emil Lundmark <lndmrk@chromium.org> Reviewed-on: https://review.coreboot.org/26471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:05:50 +0000