summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-21soc/intel/xeon_sp: Enable PMC supportRocky Phagura
PMC support was not enabled on Xeon_sp platforms. This involves turning on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC specific code. This patch leverages code from the Skylake project and adds the bare minimum hooks to leverage PMC common code. Most importantly this enables power management registers located in the PMC device (under ACPI_BASE_ADDRESS). Access to this device is also needed for SMM setup and handling. TEST=build for Tiogapass and enable the following Kconfig options: select SOC_INTEL_COMMON_BLOCK_PMC select ACPI_INTEL_HARDWARE_SLEEP_VALUES select CPU_INTEL_COMMON_SMM Boot the system and ensure pmbase is programmed. (Look for pmbase in debug messages). Secondly check that SMIs are enabled by looking at the debug messages (search for "Enabling SMIs") and verifying in HW by reading IO port 0x530. Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21soc/intel/xeon_sp/cpx: search IIO_UDS HOB once when creating DMAR tableJonathan Zhang
IIO_UDS HOB was searched several times during the creation of DMAR table. Reduce it to only once to improve boot time. Both DRHD and ATSR subtable creations involve addition of PCIe bridge device entries, combine the functions with acpi_create_dmar_ds_pci_br_for_port(). When looping through ports to create PCIe bridge device entries, use MAX_PORTS intead of NUMBER_PORTS_PER_SOCKET to improve boot time. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I469cd8473c50e105daeda6c5607592ae7cef6032 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21soc/intel/xeon_sp/cpx: remove DMAR_X2APIC_OPT_OUT flagJonathan Zhang
CPX-SP processor supports X2APIC. Remove DMAR_X2APIC_OPT_OUT flag from DMAR table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I63c9feda74c7abb591eac991cb98cdcad8afc158 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/ironlake: Clean up cosmetics of early ME functionsAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: Ic766345b58c59f3d3c3570741c0eb0ad4e53ed79 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-21nb/intel/ironlake: Clean up `send_heci_uma_message` signatureAngel Pons
The only raminfo field it needs is `memory_reserved_for_heci_mb`. So, pass in that value directly. As it's read-only, make it const as well. Change-Id: Ib5d4604e6c1c9bc77df9adfead93b6028d536a3d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45365 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/ironlake: Reduce the scope of `heci_uma_addr`Angel Pons
There's no need to have it in raminfo. Also, bump MRC_CACHE_VERSION. Change-Id: Ida48ec4f50c880fe48d88d016acd3737a0650f80 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45364 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Drop unnecessary `gma.h`Angel Pons
It only contains prototypes for the long-gone native graphics init. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I9413abb8e49496ada60dcdf801a1f8a03be38d2e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45360 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I836df4675f4886635973c0c75f5981c9ef17d84b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45359 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: Ie525e755f32599db97af7969fc7fbb36a5d826b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45358 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Clean up DMIBAR/EPBAR registersAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Sandy Bridge. Moreover, other register definitions were missing. Use the newly-added definitions in existing code, in place of numerical offsets. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I9ad849f57bc68256a2a87ffdc856c4b521e35892 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45357 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I7f2ff2a5cee8bf12e5dca74ff9f0b1a44e26cded Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45356 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
Add newly defined fields for presence of keyboard backlight and number pad to the firmware configuration table. We don't have a need to use these in coreboot (yet) but this keeps the bit definitions in sync. BUG=b:166707536 TEST=abuild -t google/volteer Change-Id: I066e445f7d0be056e45737d2c538be1850ae85aa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-21soc/intel/jsl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: I8aba558082ff5bbe2c5b12e0e623c013548e6481 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45030 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21soc/intel/cnl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: Id418480bc779d56ff5586516d9bd99ca15133203 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45029 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21Documentation: Add ASan documentationHarshit Sharma
Change-Id: I710ea495798597189941620c7e48fd5aa7476781 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-20mb/system76/lemp9: move LPC options to the devicetreeMichael Niewöhner
Change-Id: I7b7acdc51c848541fb39926bc8de1115c026dd05 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45496 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: correct CBFS_SIZEMichael Niewöhner
The BIOS region size is 0xc00000, not 0xa00000. Correct this. Change-Id: I88cb0d4b9a590a32672054aa0db7f9a92070ff6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-20mb/system76/lemp9: enable SATA ALPM capabilityMichael Niewöhner
Enable SATA Link Power Management capability to be able to save power. TEST: /sys/class/scsi_host/host*/link_power_management_policy exists. Change-Id: I88de28cfb266af3fcd6e498a08a24b46c992cb9d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45492 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: drop disabled options from devicetreeMichael Niewöhner
Drop all options with zero-value, since they already default to 0. Change-Id: I2a1a91778e83dc49c6dcf2d518cd3591f7ec4cfa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45491 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/google/zork: update morphius dptc clamshell/tablet mode settingKevin Chiu
clamshell/tablet: Slow_ppt_limit(W) 20 Fast_ppt_limit(W) 24 Slow_ppt_time_constant 5 Stapm_time_constant 200 Sustained_power_limit(W) 12 clamshell: Temperature limit(C') 100 tablet: Temperature limit(C') 70 BUG=b:157943445 BRANCH=zork TEST=1. emerge-zork coreboot 2. change mode and check "thermctl_limit" will change Change-Id: I1eda1411766e446b673046236f7cc4015696521f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45520 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20soc/amd/picasso: Add THERMCTL_LIMIT DPTC parameter supportKevin Chiu
Add THERMCTL_LIMIT (die temperature limit) DPTC parameter for clamshell/tablet mode. BUG=b:157943445 BRANCH=zork TEST=build Change-Id: Id193a74210c92d1e45ed4824ee9c0fc9ceaa5e3a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-20lint: check for misuse of Kconfig SUBSYSTEM_*_IDMichael Niewöhner
Check that nobody misuses the Kconfigs SUBSYSTEM_*_ID. They are meant to be used for overriding the devicetree subsystem ids locally but shall not be added to a board's Kconfig. Instead, the devicetree option `subsystemid` should be used. Add a linter script for this that finds and warns about such misuse. Also add a note in the Kconfigs' description. TEST=CB:45513 Change-Id: I21c021c718154f1396f795a555af47a76d6efe03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-20soc/amd/picasso: Fix typo of Kconfig settingZheng Bao
USE_PSPSCUREOS -> USE_PSPSECUREOS. Change-Id: I5c89975cc317cb93e79509e885010d14a79dd7e1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-19mb/system76/lemp9: move subsystem id from Kconfig to devicetreeMichael Niewöhner
Change-Id: I21e7e53787b115f50093d7caa72285ce480cef52 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-19mb/up/squared: move subsystem id from Kconfig to devicetreeMichael Niewöhner
Change-Id: Icf62a73ee568d9369c53bd767bd4cfb736ea76f1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-19soc/intel/common/block/cse: Refactor cse_request_global_reset() functionSubrata Banik
List of changes: 1. Check if CSE is enabled from devicetree.cb 2. Create helper function cse_request_reset() 3. Modify caller function argument cse_request_global_reset() Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3668b473bec8d51f847908d11e2e25c485ec7a97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45341 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-19apollolake boards: Enable CSE in devicetreeSubrata Banik
Enable CSE PCI device Bus 0: Device 0x0f: Function 0x00 to let Intel common cse block code can use this device. Calling me_read_config32(offset) function from ramstage: Without this CL : HECI: Global Reset(Type:1) Command BUG: me_read_config32 requests hidden 00:0f.0 PCI: dev is NULL! With this CL : HECI: Global Reset(Type:1) Command HECI: Global Reset success! Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I97d221ae52b4b03ecd859d708847ad77fe4bf465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-19libpayload: free: Separate NULL check out for clarityHsuan Ting Chen
Separate the validity check of calling free(NULL) for clarity. BUG=b:168441735 TEST=emerge-puff libpayload Change-Id: I0dc355553410bbe59e658945fb40c05f5f709380 Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18sconfig: Add function for parse+override of treeDuncan Laurie
Extract the steps to parse and override a devicetree into a function so it can be used multiple times without copying the same logic. Change-Id: I4e496a223757beb22e3bd678eb6115968bd32529 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-18trogdor: Move EN_PP3300_DX_EDP for CoachzJulius Werner
This patch updates the display power enable GPIO which moved from 30 to 52 for Coachz. Veterans of this project know that there's no point trying to ask *why* this change was necessary -- the pins move in mysterious ways and all we can do is watch and wonder. Pin 30 is now used for a new camera reset GPIO... surely, there must have been some excellent reason why that pin couldn't just have become pin 52 instead. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I00ad6a6249df66006b4f2b953a0a2449bd478f6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-09-18sconfig: Switch to getoptDuncan Laurie
Instead of positional arguments switch sconfig to use getopt and pass the arguments as options in the build system. This will make it easier to add additional options. Change-Id: I431633781e80362e086c000b7108191b5b01aa9d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
GPIOs related to power sequence are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
GPP_A19 and GPP_A20 are already declared as NC in the baseboard. Change-Id: I02f5751a70b51a197320b865d18da3a4ffeb87f7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45485 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18drivers/genesyslogic/gl9755: Add driver for Genesys Logic GL9755Ben Chuang
The device is a PCIe Gen2 to SD 4.0 card reader controller to be used in the Chromebook. The datasheet name is GL9755S and the revision is 05. The patch sets LTR value. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I16048dde348be248c748d50ca4a8a62c8a781430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-18mb/google/volteer/eldrid: Add option to enable WiFi SAR configsMalik_Hsu
This change adds a user selectable option to enable all WiFi SAR configs that apply to volteer BUG=b:168169690 TEST=1. cros-workon-volteer start coreboot-private-files-baseboard-volteer 2. USE="project_eldrid" emerge-volteer chromeos-config coreboot-private-files-baseboard-volteer 3. check wifi_sar-eldrid.hex in coreboot-private/3rdparty/blobs/baseboard-volteer Change-Id: I6b74cd2b34ebb99cc59d456e28fd7ab2399d71d0 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45233 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18util/rockchip: Port make_idb.py to python3Yilin Yang
BUG=chromium:1023662 TEST=buildbot pass TEST=1. Use python2 script 2. Run `emerge-kevin coreboot` twice, so we get bootblock.bin.1 and bootblock.bin.2 3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex and bootblock.bin.2.hex 4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the difference. (at least, the time info changes) 5. Migrate to python3 6. Similar steps, we get bootblock.bin.py3.hex 7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference is similar. (time info, git hash changes) Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I04253084ec9b65310c52598b629390051cd2172b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45447 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18superio/nuvoton: Inline `nuvoton_hwm_select_bank`Angel Pons
There's no need to place a single-line function in its own compilation unit, and then guard it behind a Kconfig symbol. This also allows using this function in stages other than ramstage. Change-Id: I103a4ea4cef24844d382854c9358bbb37d229e04 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42130 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18src/include: Add PnP/HWM unset_and_set functionsAngel Pons
RMW (read/modify/write) ops on PnP devices has never been so simple. The semantics also allow the compiler to emit valid warnings if the input parameters would overflow, which are silenced when the cast is placed outside of the function. Change-Id: Ica01211af2a9a00aed98880844a836f6b7957b14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42134 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18util/exynos: Port *_cksum.py to python3Yilin Yang
BUG=chromium:1023662 TEST=1. Create a tiny file `in.txt` as input 2. Run `fixed_cksum.py in.txt out.txt 20` with py2 and py3 version, the output is the same 3. Run `variable_cksum.py in.txt out.txt` with py2 and py3 version, the output is the same Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I9428269dfb826a3a95fffef9ea3f7c1a7107ef84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18util/mtkheader: Port gen-bl-img.py to python3Yilin Yang
BUG=chromium:1023662 TEST=1. Use python2 script 2. Run `emerge-asurada coreboot` twice, so we get bootblock.bin.1 and bootblock.bin.2 3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex and bootblock.bin.2.hex 4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the difference. (at least, the time info changes) 5. Migrate to python3 6. Similar steps, we get bootblock.bin.py3.hex 7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference is similar. Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I788e7c9b09257142728a0f76df8c2ccc72bf6b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18libpayload: cbgfx: Fix 'equals' counter for Lanczos resamplingYu-Ping Wu
The current initialization of the 'equals' counter is incorrect, so that when 'equals >= SSZ * SSZ', the pixels in the sample array might not be all the same, leading to a wrong pixel value being set in the framebuffer. The 'equals' counter stores the number of latest pixels that were exactly equal. Within the for loop of 'ox', the sample array is updated in a column-based order, and the 'equals' counter is updated accordingly. However, the 'equals' counter is initialized in a row-based order, which causes it to be set too large than it should be. Consider the example where sample[sx][sy] are initially: [X X X A A A] // sy = 0 [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] // sy = SSZ Then, the correct implementation will initialize 'equals' to be 15, with last_equal being B. Suppose all of the remaining pixels are B. Then, at the end of the 'while (fpfloor(ixfp) > ix)' loop when ix = 4, or equivalently after 4 more columns of sample are updated, 'equals' will be 15 + 6 * 4 = 39, which is greater than SSZ * SSZ = 36, but we can see there are still 2 A's in the sample: [B B B B A A] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] Therefore, we must also initialize the 'equals' counter in a column-based order. BUG=b:167739127 TEST=emerge-puff libpayload TEST=Character 'k' is rendered correctly on puff BRANCH=zork Change-Id: Ibc91ad1af85adcf093eff40797cd54f32f57111d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-17soc/intel/cannonlake: add missing special function padsMichael Niewöhner
The following parameters do nothing else than configuring the corresponding pads to native mode: - DdiPortEdp - DdiPort*Hpd - DdiPort*Ddc - GpioDdp* - SpiGpioAssign - I2c*GpioAssign - SerialIoUartDebugEnable - Gp*GpioAssign - Uart*GpioAssign - GpioEnableHdaLink - AudioLinkDmic* - AudioLinkSsp* - GpioEnableHdaSspMasterClock - AudioLinkSndw* - SmbAlertEnable Add the missing special function gpio pad groups for CNL, to be able to configure them via gpio.h instead having to set various FSP parameters. The groups and names are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Ia3bc1df1a14dbca7c7213577cb2d5b98bb0acf64 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: update power limitsJeremy Soller
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle. This was determined by increasing the values and running the system at 100% CPU utilization until thermal throttling occured and the chassis temperature became uncomfortable. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43624 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: disable PCH DMIC, which is not wiredMichael Niewöhner
The microphone is wired to the audio codec, not to the PCH. Disable the DMIC interface. Change-Id: I4128a694c1a66d3c2c2d1cb831fcca3487160f8f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45133 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/cannonlake: rename "RSVD" GPIOs to their correct namesMichael Niewöhner
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I59df09c8fd464e75f918455aa1972765abc51459 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: skip FSP init of UART2Jeremy Soller
This UART is already initialized by coreboot for the console, it does not need to be initialized by the FSP. Tested on lemp9. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I7c299fd7cf6fe53d1f500a899a14e63e51ad6266 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-17nb/intel/haswell: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib68d8b88b0d79cb33d42f9e21cfb0e57abae75e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45355 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I143b3c829be44a39e14902255cd4bb13bf02f0c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45354 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/x4x: Clean up TPM-related codeAngel Pons
Perform the read to the TPM base address using <arch/mmio.h> functions. Remove dead variable assignment and rename TPM base address macro. Tested with BUILD_TIMELESS=1. Asus P5QL PRO remains identical. Change-Id: I11d737903c57fce768b760fe717564dae8879ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-17nb/intel/pineview: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical. Change-Id: I347466f56d3d5fb3793b3a25e4a825c844e50d42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/pineview/iomap.h: Rename to memmap.hAngel Pons
It primarily contains definitions for MMIO windows. Change-Id: I8cd639c8c7d400a5bfd73735113dd27dd6f948e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Do not re-read ME UMA sizeAngel Pons
It has been read twice already, so don't read it a third time. Change-Id: I56ec3a10246f6ebe8074e7b8c164bda6b90eee87 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop some unused function parametersAngel Pons
Some of the HECI functions do not need raminfo at all. Change-Id: If0720fa87e5e18820db77a1b61bcdb42ecc538fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop `heci_bar` field from raminitAngel Pons
This field is only written to, never read. Drop it from raminfo. Also, bump MRC_CACHE_VERSION as the saved data layout has changed. Change-Id: I83d6e69addff996e2f18472d3e1d4f7b9ba974fd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/haswell: Clean up register definitionsAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Haswell. Moreover, other register definitions were missing. Although most of them are unused, native platform init may eventually use them. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6b3a47b2af406da6b030d417f14a2f4d394aa9c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45353 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I5e1a02ba2ebf468f0d80b7f1838766280b6b7b22 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45352 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib275f9ad8ca9ff343604c9e8cbb130c74ddad54f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45351 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop `void *` cast in `MCHBAR32`Angel Pons
This changes the binary for the native raminit code path. Tested on Asus P8Z77-V LX2, still boots with native raminit. Change-Id: Ie8f1205a64e5264cb909d67c1dd402c18a6241ad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45350 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17Update amd_blobs submodule to upstream masterMatt Papageorge
Updating from commit id 3bd9078: 2020-08-12 17:03:38 -0600 - (picasso: Update PSP to 0.8.6.7B) to commit id e393a88: 2020-09-16 14:32:50 +0000 - (Update SMU firmware for Picasso, Pollock and Dali) This brings in 1 new commits. Change-Id: I1e317cf6ef4803577e9b353fb3313d001db228d7 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45455 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop casts from DEFAULT_{MCHBAR,DMIBAR}Angel Pons
This allows us to drop some casts to uintptr_t around the tree. The MCHBAR32 macro still needs a cast to preserve reproducibility. Only the native raminit path needs the cast, the MRC path does not. Tested with BUILD_TIMELESS=1, these boards remain identical: - Lenovo ThinkPad X230 - Dell OptiPlex 9010 - Roda RW11 (with MRC raminit) Change-Id: I8ca1c35e2c1f1b4f0d83bd7bb080b8667dbe3cb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45349 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
RCBA is located in the PCH. Replace all instances with the already-defined `DEFAULT_RCBA` macro, which is equivalent. Change-Id: I4b92737820b126d32da09b69e09675464aa22e31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45348 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/ironlake: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
This macro is unused, and RCBA is located in the PCH. Drop it. Change-Id: Id7c095496360bbe96dc2a36dcc557a1481c02c31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45347 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: move HDA options into devicetreeMichael Niewöhner
Change-Id: Id4fc12896f89739d0ee2a47a42173693921da14e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45132 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/volteer: Select USE_CAR_NEM_ENHANCED_V2 for Tigerlake QS basedShreesh Chhabbi
platforms BUG=b:145958015 TEST= Build Volteer coreboot and boot on Volteer Proto 2 and Delbin. Cq-Depend:chrome-internal-review:3249528 Change-Id: I0ff896424ab23dba43075c44eb9b2c2c480ccbfb Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-17mb/google/volteer/variants/eldrid: Configure DP_HPD as PAD_NCnick_xr_chen
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:165893624, b:168090618 Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I31b25be1c9248debf855435c7b688b358e2cd57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45246 Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17src: Remove redundant <device/pnp_type.h>Elyes HAOUAS
When <device/pnp.h> is needed, it is supposed to provide <device/pnp_type.h>. Change-Id: I0e479e2abdb6cfb8633840db2222ce5397fe7d55 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45403 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17src: Remove redundant <device/pnp_def.h>Elyes HAOUAS
When <device/pnp.h> is needed, it is supposed to provide <device/pnp_def.h>. So remove redundant <device/pnp_def.h> includes. I'll remove also <device/pnp_type.h> in a separate patch. Change-Id: Ib9903ae456c32db4ba346020659c17c27a939e89 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-17soc/amd/picasso: Clean up legacy UART configRob Barnes
Clean up configuration of the legacy UART and add Kconfig options for the mapping between UART and legacy I/O decode. BUG=b:143283592 BUG=b:153675918 TEST=Linux detects an additional legacy serial port for each active MMIO one if PICASSO_UART_LEGACY is selected. BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id08ff6428d4019303ebb6e44e13aba480cf1fde2 Reviewed-on: https://chromium-review.googlesource.com/2037891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-17soc/intel/cannonlake: fix GPIO community numbering in ACPIMichael Niewöhner
This corrects the GPIO community numbers in CNL-LP ACPI code. Change-Id: I9f13a28d3e8f427859570a4d209304ae8444efd9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45209 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/common/block/chip: Refactor chip_get_common_soc_structure()Subrata Banik
Found-by: Klocwork, Pointer soc_config is used uninitialized. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I7e2aa4ef23a68a2ec2ba9d55cf890a7f81e3e278 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-17soc/intel/common/block: Add NULL check for 'ctx' pointerSubrata Banik
Found-by: Klocwork, Avoid NULL pointer (ctx) dereference. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I16015b538112e0b125b4a5e145c26263c456953c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45411 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/mediatek/mt8192: Init PLL in bootblockCK Hu
Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: If16d244e07d9f369efd991132587a92e38200b45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-17soc/mediatek/mt8192: Add mtcmos init supportWeiyi Lu
Using common mtcmos code to power on audio and display modules in SOC. TEST=Boots correctly on MT8192EVB. Passes the status check at the end of mtcmos_power_on() Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ie7bff831eecfc2b4d315a577f6ff86befc483eab Reviewed-on: https://review.coreboot.org/c/coreboot/+/45394 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/google/zork: Add dptc interface support for morphiusChris Wang
Add dptc interface in devicetree for morphius. Set the STAPM parameters for tablet mode: dptc_enable = 1 dptc_fast_ppt_limit = 24000 dptc_slow_ppt_limit = 20000 dptc_sustained_power_limit = 6000 BUG=b:157943445 BRANCH=zork TEST=Build. check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4dac4b7e5157ad7ad407f42a6fc6b06eefbf3291 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-17ec/google/chromeec: Add dptc interface supportChris Wang
add the dptc interface support when system in tablet mode. In some FP5/FT5 platform, which will have different power or thermal parameters depends on different form factor. BUG=b:157943445 BRANCH=Zork TEST=Build. check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I2be7942132cea474237f531021ad4fd9856b5050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44265 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/amd/picasso: add dptc supportChris Wang
add dptc support for different power parameter on tablet/clamshell mode The BIOS may choose to adjust power and/or thermal parameters at its own discretion. The DPTC interface(DPTCi) ALIB Function adds flexibility by allowing the BIOS to request power state changes independently of specific events. BUG=b:157943445 BRANCH=none TEST=Build.Generated ASL code from SSDT by acipgen_dptci().check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Icae94103f254f8fdb84e6ee0f5404fb09fa97b2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16soc/intel/common/block: Do not die if PRMRR size unsupportedAngel Pons
If a given PRMRR size is not supported, do NOT brick people's devices. We don't do that when PRMRRs aren't even supported anyway. Change-Id: Ib917be873aedbc5e789bb0894fca335b5ee9e2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-09-16region_file_update_data_arr: Modify region_file with array of buffersShelley Chen
Add region_file_update_data_arr, which has the same functionality as region_file_update_data, but accepts mutliple data buffers. This is useful for when we have the mrc_metadata and data in non-contiguous addresses, which is the case when we bypass the storing of mrc_cache data into the cbmem. BUG=b:150502246 BRANCH=None TEST=reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Change-Id: Ia530f7d428b9b07ce3a73e348016038d9daf4c15 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45407 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16soc/amd/picasso/data_fabric: make register number parameter unsignedFelix Held
The register number is always non-negative, so it should be an unsigned type. Change-Id: I6b6df5a41fe58efc53eaa87c01b88426ea8daa6e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16soc/amd/picasso/data_fabric: include types.hFelix Held
data_fabric.c uses types from stdint.h, but doesn't include stdint.h directly, so replace the inclusion of stdbool.h with types.h which includes both stdbool.h and stdint.h. Change-Id: I4c1ea444e50218cf19fc8fff499929336265bd03 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
2020-09-16xeon_sp/skx: Reorder pci_devs.hMarc Jones
Reorder to be similar to cpx/include/soc/pci_devs.h. We may be able to merge the files in the future. Checked TiogaPass with BUILD_TIMELESS=1 Change-Id: I939707cc9e58e23f053156f40df4c21a6072570b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45220 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16xeon_sp/cpx/pci_devs.h: Remove duplicate definesMarc Jones
Change-Id: I8fc4e07269175eb2f40655b828e340697a9a892a Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45219 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16soc/mediatek: move power status bits under each chipWeiyi Lu
The power status bits of display and audio of MT8192 are different from the bits of MT8173 & MT8183, so move those under each chip. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Iaa211b8db733d8aa52d93af9e507042bf0984d55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-16mb/google/dedede: Replace static Camera ACPI by driver for WDooPandya, Varshit B
This change updates devicetree to enable SSDT generation for world facing camera and user facing camera of Waddledoo. Also reverts DSDT changes related to both the camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Ib7e875d297c04f35d4e980ff33d9a3767d2910ac Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-09-16drivers/intel/mipi_camera: Add compatible field for NVMPandya, Varshit B
Add compatible field for NVM Make PRP0001 as default HID if device type is INTEL_ACPI_CAMERA_NVM Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Iad7afa7b3170982eb5d6215e766f3e98f7a89213 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-09-16mb/google/dedede/var/madoo: Enable keyboard backlight featureIan Feng
This enables the keyboard backlight feature in ACPI for madoo. BUG=b:167943993 TEST=Verified 'kbd_backlight' shows up in the '/sys/class/leds '. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I11531699cb650b96becae5c1bec9f89c48b6bea0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-16drivers/spi/tpm: Improve error checkingCaveh Jalali
This adds error checking in paths that previously ignored TPM communication errors. We hit this case occasionally during "Checking cr50 for pending updates"; previously we would go down this path and eventually time out using MAX_STATUS_TIMEOUT, which is 2 minutes. Now, we detect the failure and return with an error indication instead of timing out after a long time. The root cause of the communication error is an open issue. BUG=b:168090038 TEST=booted on volteer, observed error handling when "Checking cr50 for pending updates" fails. Signed-off-by: Caveh Jalali <caveh@chromium.org> Change-Id: Ia8a1202000abce1857ee694b06b1478e6b045069 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jes Klinke <jbk@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-16drivers/aspeed/common: Reduce severity of `EDID not found` log messageAngel Pons
Servers often run headless, so a missing EDID isn't a problem. However, we still need to initialize a framebuffer for the BMC's KVM function. Reduce the log level to BIOS_INFO to avoid confusion. Change-Id: Ice17bf6fdda0ce34e686dbf8f3a1fa92ba869d7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-16soc/amd/picasso: Convert DDR4 MHz to MT/s correctlyRob Barnes
Memory speed is given as an integer in MHz. In some cases it has an implicit fractional speed, so simply multiplying by 2 is not sufficient. Use method from dram/ddr4.c instead. BUG=b:167155849 TEST=Boot ezkinil, check output of 'mosys memory spd print all' and dmidecode -t17 BRANCH=Zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Icc77c21932c68ee9f0ff0b8e35ae7b1a3732b322 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16device/dram: Add method for converting MHz to MT/sRob Barnes
Add method for converting DDR4 speed in MHz to MT/s. Checks that MHz is within a speed grade range. BUG=b:167155849 TEST=ddr4-test unit test BRANCH=Zork Change-Id: I1433f028afb794fe3e397b03f5bd0565494c8130 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16zork/var/ezkinil: Fix Touchscreen doesn't work on v3.6x rework boardLucas Chen
The gpio90 EN_PWR_TOUCHSCREEN had been set to PAD_GPO(GPIO_90, LOW), but addtional PAD_NC(GPIO_90) cause enable fail. remove it for issue fixed. BRANCH=zork BUG=b:168580357 TEST=Check Touchscreen function work Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Id94dd63ba51759cebaf17779a5e659dbe0f1807f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45415 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16trogdor: invoke new watchdog function before qclib runsRavi Kumar Bokka
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ia76323c749a9ba71cc752a91c968aeacc11e0093 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45212 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16sc7180: report hardware watchdog reset after rebootRavi Kumar Bokka
add WATCHDOG_TOMBSTONE in memlayout.ld Change-Id: I57ece39ff3d49f2bab259cbd92ab039a49323119 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-15soc/amd/stoneyridge/acpi/sb_pci0_fch: remove duplicate I/O rangeFelix Held
This I/O region is already covered by the range declared right above the deleted one. Change-Id: I8b8ff3385bbba8e69101ee2c5a5cb39c8f996b94 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15soc/amd/picasso/acpi/sb_pci0_fch: remove duplicate I/O range reservationFelix Held
This I/O region is already covered by the range declared right above the deleted one. TEST=Linux stops complaining about overlapping I/O regions. BRANCH=zork Change-Id: I149fb0dc85bfe721a6b0d81e4e9c197194718876 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45368 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15nb/intel/ironlake/raminit: Work around compiler bugPatrick Rudolph
This fixes commit e1d1fe454cf27d6b1c2ef5625f1cefc1a9c6ec9d initialize 'reply.command'. The compiler now optimized away the final condition, that checks the result of heci message, resulting in a binary that always calls die(). Fix that behaviour by using volatile. Tested on Lenovo T410: Boots again into Linux. Change-Id: I63cffc8812bd22695c01bf57283ca593b12e3d87 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-15soc/intel/alderlake/romstage: Do initial SoC commit till romstageSubrata Banik
List of changes: 1. Add required SoC programming till romstage 2. Include only required headers into include/soc 3. Add SA EDS document number and chapter number 4. Fill required FSP-M UPD to call FSP-M API Change-Id: I4473aed27363c22e92e66cc6770cb55aae83e75c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-15mb/intel/jasperlake_rvp: Fix wrong comments for ECTSubrata Banik
Disable -> Enable Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iccefb02fa9bf9507b9e679b3fba35c5c28d677a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-15acpi: Correct sizes for ACPI data fieldsJason Glenesk
Correct sizes of Count, Type, and Latency data field in _CST object to integer, byte, word, respectively. Correct size of NumEntries data field in _CSD object to integer. BUG=b:155307433 TEST=Boot Morphius and dump SSDT _CST and _CSD objects. Confirm that sizes written conform to ACPI_6_3_May16.pdf ACPI specification. BRANCH=Zork Change-Id: I356b46f2fa787e18442a66280b6545a3b525a08b Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45339 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15soc/intel/common/block/cpu: Fix boot failurePatrick Rudolph
This fixes commit 1b89f5e "Guard options with if-blocks". The code no longer returns if SGX is disabled, but as the PRMRR configuration is missing it runs into die(). Tested on Prodrive Hermes: Boots again into Linux. Change-Id: I6d32ca32b1b53767b2db91305103cd532823a5ca Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>