summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor lintsrc generationPatrick Georgi
We copied pretty much the same code for generating mptable entries for local interrupts (with some notable exceptions). This change moves these lines into a generic function "mptable_lintsrc" and makes use of it in many places. The remaining uses of smp_write_lintsrc should be reviewed and replaced by mptable_lintsrc calls where possible, and smp_write_lintsrc made static. This patch was generated using Coccinelle: @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @m@ identifier mc; expression BUS; @@ -#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin)); ... -IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); -IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, BUS); Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/244 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Make Asus A8V-E SE better ACPI citizen.Rudolf Marek
Use the SSDT autogen infrastructure to support the automatic reserved resources, automatic P-state generation and automatic _CRS PCI0 method. Change-Id: Ic56a92eeb70a0a2a2d6de2507009ec3a832c83b3 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/251 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-12w83627hf: ASL include containing virtual device tree of the SuperIOChristoph Grenz
Add a ACPI Source Language snippet to superio/w83627hf which maps the SuperIO and most of the logical devices to PnP devices, exposing configuration options and chip power management to the OS. Written using the Winbond W83627HF/F datasheet. Change-Id: I1108d29b341ef78fe7f1e574f98b680aada39daf Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/223 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12amdk8: ASL include for K8 temperature sensor support in ACPIChristoph Grenz
Add a ACPI Source Language snippet which if included as shown in the comments in the file, exposes the 4 possible temperature sensors in the CPU as ACPI thermal zones. Change-Id: I94dd773108e348a0fdb9d2f8d6cfe415d5fa0339 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/222 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800 RAID: add kconfig option RAID_MISC_ROM_POSITIONKerry Sheh
SB800 RAID ROM require to put the misc ROM to specific position, this patch enable user to put the RAID misc ROM to the right place in the coreboot image. Change-Id: I4fc64df8e091fb0cccd063826ab31a4f198942d1 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/249 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
In order to make sure AHCI/RAID ROM works correctly For SB800_SATA_AHCI or SB800_SATA_RAID mode, SATA should enable bus master and the ahci also should be enabled. Change-Id: I9d9c557816d364d8373fe343860ad5fe45988200 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/248 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12avalue/eax-785e: Get SATA Mode from Kconfig optionKerry Sheh
Change-Id: I67aab3ba7de85337e2cf83b6d1be63cb04bf0fcd Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/233 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12sb800: Add Kconfig option ENABLE_IDE_COMBINED_MODEKerry Sheh
Add this option to enable/disable SATA IDE Combined Mode feature Change-Id: I1ab8acd27947a71baf954f44d0741f81f48e5541 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/231 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12persimmon: complete the sb800 devicetreeKerry Sheh
sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. So the missing sb800 USB3 devicees was add to the mainboard devicetree. Because of no physical usb connector connected to USB3, the USB3 device setting was off. Change-Id: If060ccb43df7fbe88bafc61e9e600a9120575437 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/232 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11Don't do a call as the first instruction in libpayload.Marc Jones
Doing a call before the payload has set up its stack is risky. The stack may not be in a favorable location. Normally this is not an issue with coreboot or other well behaved callers. Change-Id: Ie6f6748a471324b29ebad045c807dfc9f4b92034 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/240 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-11Fixed broken MTRR for >4GB memory on AMD K8 fam 0fh rev <=EOskar Enoksson
AMD K8 rev F and later implements a bit SYSCFG_MSR_TOM2WB to mark dram memory above 4GB as WB. However, AMD K8 rev E and earlier don't implement this bit and therefore need MTRR spanning dram memory above 4GB. The current implementation of amd_setup_mtrrs never generate MTRR above 4GB. This caused memory > 4GB not to be recognized in e.g. Linux on those rev E or older platforms. This commit should fix that bug. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: Ie568a52a8eb355969c86964d5afc4692e60f69c1 Reviewed-on: http://review.coreboot.org/238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11mainboard: complete the sb800 devicetree even device is offKerry Sheh
sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. Change-Id: I76ebad842e90b0f740abbec031165d7c39a80abf Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/230 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11sb800: sata combine mode configure fixKerry Sheh
Using micro CIMX_OPTION_ENABLED/CIMX_OPTION_DISABLED to configure SataIdeCombinedMode is wrong. sbPowerOnInit() use SataIdeCombinedMode to determine whether hide the IDE controller 0: IDE controller is exposed and Combined Mode is enabled. SATA controller has control over Port0 through Port3, IDE controller has control over Port4 and Port5 1: IDE controller is hidden and Combined Mode is disabled, SATA controller has full control of all 6 Ports when operating in non-IDE mode Change-Id: I32e7101737f1dbfff49daa58670e6820b476b250 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/229 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11persimmon: sb800 sata mode configure updateKerry Sheh
persimmon configure sb800 sata mode according to the southbridge kconfig selection. Change-Id: I44a9c36ca68b4a0e1086f04c4338d3a5f536fdca Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/227 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11sb800: Add sata ahci/raid mode kconfig optionKerry Sheh
If sb800 sata was configured as ahci or raid mode, give the option to add ROM files. Change-Id: I87a7814930ce3a7c38cde1e235d151223eea2107 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/225 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03pci_ids: Add sb800 SATA device raid mode device idKerry Sheh
sb800 SATA device have different device id with different configure mode, 4392h for RAID mode, 4393h for RAID5 mode Change-Id: If54f7751f531c94ee725309a2a5c255390935ead Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/226 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03TINY_BOOTBLOCK problem-fix on amdk8+amd8111 platformsenok71
The hp/dl145_g1 motherboard did not work since commit 1f7d3c5672ec90f8d71907b1a07c8a87fa461047 (svn 6124). That commit added TINY_BOOTBLOCK for amd8111 southbridge. The result was that the boot process stopped very early (no console output whatsoever). The same symptom was reported on other AMDK8 based boards with amd8111 southbridge chips. This commit seems to fix the bug. It adds a bootblock.c under src/northbridge/amd/amdk8 that calls enumerate_ht_chains. Probably the problem was that enum_ht_chains needs to be called before the southbridge bootblock.c function, not after. Change-Id: I74fb892aa39048e2d0e76c081b713f825d67f2d4 Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/235 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-24Add AMD Family 10h PH-E0 supportQingPei Wang
the patch file comes from src/vendorcode/amd/agesa/f12/Proc/CPU/Family/0x10/RevE /F10MicrocodePatch010000bf.c Change-Id: If701c8a908edf1c486665d3ce4df65da0f65c802 Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/202 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-24mkelfImage: Use -fno-stack-protector if supported by gccRaymond Danks
Gcc 4.1 comes with an SSP https://wiki.ubuntu.com/GccSsp This is disabled to work around '__stack_chk_fail' symbol not found failures http://www.coreboot.org/FAQ/Obsolete#How_do_I_fix_stack_chk_fail_errors.3F The presence of -fno-stack-protector is tested for automatically by configure. Change-Id: I28ef158829f5935f985cfd5a5440733685cf479a Reported-by: Raymond Danks <raymonddanks@gmail.com> Signed-off-by: Raymond Danks <raymonddanks@gmail.com> Reviewed-on: http://review.coreboot.org/112 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
LXBIOS and LXB-DSDT are not used in other parts of the tree. Make names consistent across the tree. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I91caeac09fd2401a36e53bd061d249b236a48e43 Reviewed-on: http://review.coreboot.org/224 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-17Persimmon doesn't have HDMI so the GNB HD Audio should be disabled.Marc Jones
Change-Id: Ic960fe09fbed2c8a31c7c9ac2c54f6c88efebed3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/219 Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Tested-by: build bot (Jenkins)
2011-09-17Enable SATA AHCI for faster boot with SeaBIOS.Marc Jones
Change-Id: Ibd87422680350c112eabe1bb73b237031c3e9d6b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/220 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com>
2011-09-16Persimmon updates for AMD F14 rev C0efdesign98
These are the changes for the AMD Persimmon mainboard required to support the update of the AMD Family 14 cpu to rev C0. There are many warning fixes; the agesa- wrapper.c file has been changed to fix the amdinitlate and amdlaterunaptask routines, and more. Change-Id: I6de43379a2819cea5169db5f21d4841f9a4942a7 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/137 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15Build warning fix for AMD Family 12efdesign98
This trivial change adds a prototype to an existing header file to fix a build warning for the AMD family 12 cpus. Change-Id: Ic666bfbef867d17607eaa0f59570aea987a31f93 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/218 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Inagua platform updatesefdesign98
These changes update the Inagua platform. The changes include modifying the Kconfig to suggest video bios and ahci rom implementations, changing the dimm spd code to use the correct bus addresses, cleaning up the makefile a bit, and fixing a duplicate definition warning associated with the BIOS_SIZE value. Change-Id: Idab88dda48f08877dbbd2de3136bdf0e54e31247 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/136 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Torpedo platform updatesefdesign98
This update fixes warnings and supports as necessary the Agesa infrastructure changes required to support the AMD Family 14 cpu update to rev C0. Change-Id: Ib08b49695b925b81f796bf299141fe6f845fdef8 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/138 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Agesa macro expansion fixefdesign98
This change fixes the use of a macro that was previously modified to fix a warning. The macro was used in a manner that doubly incremented a pointer. The pointer increment was removed from the macro call and moved elsewhere. In addition, an unused macro was removed from both Family 12 and Family 14 code. Change-Id: I577794bbc55d18f21170dda1d0bbdc6d776ce392 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/217 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-15AMD SB800 early console use fixefdesign98
This change removes printk's that occur before console init is called. In the best case, these would cause an extremely slow boot, and in the worst case would cause a complete post failure. Change-Id: I50388e71225e95db602aa45835c39126c1c920a3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/216 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Agesa changes to fix F14 boot issuesefdesign98
This collection of changes fixes a buffer addressing issue by removing one level of indirection, fixes an Agesa HT mailbox retrieval bug, and fixes a buffer location-by-signature issue. Change-Id: Ic8a8cb3f9abddd9ad59343a85dbbee5aa7633be3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/215 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-09-14AMD F14 Northbridge updatesefdesign98
This change is warning and whitespace fixes in the northbridge code for AMD Family 14 rev C0 cpu update. This does not address warnings in the mainboard, Agesa, Cimx, or southbridge code. Change-Id: I7ee7018a292ebb2343c9b7986dd21227185879dc Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/134 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14Update to Asrock E350m1 for AMD F14 C0efdesign98
This updates the E350m1 Agesa wrapper code to fix an issue with AmdLateRunApTask. It now passes the function parameter through to the Agesa routine. There is also a change to the platform_cfg.h file that makes the definition of BIOS_SIZE dependent on whether or not it was defined earlier. Change-Id: I19942c7d3ecd229a13ef0a69fa7e5b1ea0b909bf Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/139 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14mainboard: add avalue/eax-785 ITX mainboardKerry She
It's AM3 Socket, 880M + SB850 chipset, similar with advansus/a785e-i. Onboard device UART, VGA, SATA, PCI Slot, 2 X16 PCIe slot, 4 X1 Pcie slot, Lan, audio, PS2 keyboard/mouse and USB are verified. Change-Id: I483363f5ff9fbfc5cda2f0521660751212f3e326 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/208 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14rs780: hide unused gfx ports and gpp portsKerry Sheh
Hide the unused gfx ports and gpp ports if they are not configured as hotplug. lspci -vvv will get more accurate information under Linux, tested on avalue/eax-785e. Change-Id: Iaabfd362a0a01f21d0f49aa2bd2d26f9259013fb Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-14Provide mechanism to local additions to the buildPatrick Georgi
site-local/ is an optional directory for local additions to the build. If site-local/Makefile.inc exists it will be parsed and used. Use it to define VGA option roms, splash screens, extra rules to the tree... Change-Id: I0c6ee43ffa40e6c3f193db081ab551ab75bc7478 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/212 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14superiotool: Don't compile with -WerrorMathias Krause
Older libpci version have headers using 'long long' which isn't allowed in ANSI C. Since we cannot control the libpci version installed in the system nor in generall have complete control over system headers, simply skip using -Werror in our makefile. Change-Id: Ibc1e57bef033bf4971f4108d078222dcf168d5e3 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/210 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14inteltool: fixed 64 bit buildMathias Krause
The inline assembly for cpuid() was 32 bit specific. Additionally a format string referencing a size_t argument wasn't using the %z length modifier. Change-Id: Iac4a4d5ca81f9bf67bb7b8772013bf6c289e4301 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/211 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14inteltool: Fixed building of position independent executablesMathias Krause
When building a position independent executable (PIE) EBX is used internally by the compiler to generate position independent address references so it cannot be used in the clobber list. Use the already existing code for the Darwin plattform for that case, too -- it'll preserve the EBX value. Change-Id: Ief6d4872b8cd990856a0e8227a88bb228782aced Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/209 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14libpayload: Add get_option_from()Patrick Georgi
This function allows reading the nvram configuration table from locations other than the cbtable. Change-Id: I56c9973a9ea45ad7bf0185b70d11c9ce5d0e0e1b Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/213 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14Add IT8721F supportQingPei Wang
only the serial port is tested, keyboard/mouse are gonna to be tested later, it may also need some more patches to make it work completely. Change-Id: Ie9464d01c5d5760ebc800b3cd15a4ab2bad2e09f Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/204 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14util/crossgcc: Update gdb to 7.3.1Peter Stuge
The previous version is no longer available. Change-Id: I8126617cfe9addeb4778f002398abbcb4c73d2c7 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/214 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-09-12inteltool: added more device IDsRuud Schramp
Change-Id: I6f2272ae4071025e671638e83bade6a96aac658b Signed-off-by: Ruud Schramp <schramp@holmes.nl> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/185 Tested-by: build bot (Jenkins)
2011-09-12Add acpi_get_sleep_type() to i82371eb and P2B _PTS/_WAK methodsTobias Diedrich
Build fix for src/arch/i386/boot/acpi.c if !CONFIG_SMP Also check for acpi_slp_type 2 in acpi_is_wakeup, since S2 uses the same acpi wakeup vector as S3. Add _PTS/_WAK methods to turn off/on the CPU/case fans and blink the power LED while sleeping. acpi_get_sleep_type() is in a seperate file i82371eb_wakeup.c because it is used in both romstage and ramstage after patch 3/3, whereas i82371eb_early_pm.c is used only in romstage. I used the name acpi_get_sleep_type instead of acpi_is_wakeup_early because I think acpi_is_wakeup_early is a bit misleading as a name since it doesn't return a boolean value. Other chipsets so far only ever set acpi_slp_type to 0 and 3, so the added check for acpi_slp_type == 2 (resume from S2) should not change behaviour of other boards: northbridge/intel/i945/northbridge.c:256:extern u8 acpi_slp_type; northbridge/intel/i945/northbridge.c:263: acpi_slp_type=0; northbridge/intel/i945/northbridge.c:267: acpi_slp_type=3; northbridge/intel/i945/northbridge.c:271: acpi_slp_type=0; southbridge/intel/i82801gx/i82801gx_lpc.c:171:extern u8 acpi_slp_type; southbridge/via/vt8237r/vt8237r_lpc.c:149:extern u8 acpi_slp_type; southbridge/via/vt8237r/vt8237r_lpc.c:238: acpi_slp_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0 ; southbridge/via/vt8237r/vt8237r_lpc.c:239: printk(BIOS_DEBUG, "SLP_TYP type was %x %x\n", tmp, acpi_slp_type); Change-Id: I13feff0b8f49aa988e5467cdbef02981f0a6be8a Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/188 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-12Miscellaneous AMD F14 warning fixesefdesign98
This commit adds in some more fixes to AMD F14 compile warnings. The change in the mtrr.c file is in prep- aration for changes yet to com, but it is currently innocuous. Change-Id: I6b204fe0af16a97d982f46f0dfeaccc4b8eb883e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/133 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-09Replace while with do; while to avoid repetitionNoe Rubinstein
Cosmetic only; replaces some 'while' loops with 'do; while' loops to avoid repetition. Replacement performed by the Ruby expression: t.gsub!(/^(\s*)([^\n\{]+)\n\1(while[^\n\{;]+)\n\s*\2/, "\\1do \\2\n\\1\\3;") Change-Id: Ie0a4fa622df881edeaab08f59bb888a903b864fd Signed-off-by: Noe Rubinstein <nrubinstein@proformatique.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/183 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Crank up CPU speed on Intel Core and Core2 CPUsPatrick Georgi
The CPUs start on their slowest speed, and were left that way by coreboot. This change will speed up coreboot a bit, as well as systems that don't change the clock for whatever reason. Change-Id: Ia6225eea97299a473cf50eccc6c5e7de830b1ddc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/176 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Report GSE chipset and warn if the code has been compiled for the wrong chipset.Stefan Reinauer
It would be nicer to unify the code so that it does all detection at runtime instead of compile time (but that would also significantly increase code size) so if someone else wants to give it a shot... Change-Id: Idc67bdf7a6ff2b78dc8fc67a0da5ae7a4c0a3bf0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/184 Tested-by: build bot (Jenkins)
2011-09-07Add support utils for tracingRudolf Marek
Following patch adds a userspace util genprof which is able to convert the console printed traces to gmon.out file used by gprof & friends. The log2dress will replace the adresses in logfile with a line numbers. Change-Id: I9f716f3ff2522a24fbc844a1dd5e32ef49b540c5 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/179 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07Add support for the tracing infastructure in coreboot.Rudolf Marek
The compiler is forced to emmit special functions on every entry/exit of the function. Add a compile time option to support it. Function entries will be printed in the console. The CONFIG_TRACE has more documentation. Patch for userspace tools will follow. Change-Id: I2cbeb3f104892b034c8756f86ed05bf71187c3f3 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/178 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 Rev C0 updateKerry She
Add AMD Family14 Rev C0 cpu id Change-Id: Iacd1c7b20e889da61a2085188766285f27e5c018 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/160 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD SB800 southbridge updateKerry She
This patch enables access to the registers of the hardware monitor logical device in the superio via isa ports 0x295/0x296. Previously this was not enabled in the SB8xx LPC device. This is required for initialisation in init_hwm() in src/superio/winbond/w83627hf/superio.c and also by OS-level sensor monitoring such as lm-sensors to access temperature, fan monitoring and control and voltage registers. asrock/e350m1 and advansus/a785e-i mainboard changes are included herein. Change-Id: I2176885549277b335c0c41b48457d09b9b76b703 Signed-off-by: Per Hansen <perh52@runbox.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/159 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-04Adjust some code/comment of sb700 sata initWang Qing Pei
The inline comment of sata_init function seems not placed correctly. Rearrange it. Change-Id: I63480da60e51cdc68e64c302ad2d8a6197e288f6 Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/186 Tested-by: build bot (Jenkins)
2011-09-04Disable dev3 on ma78gm-us2hWang Qing Pei
Disable bus 0 dev 3 PCI bridge, ma78gm-us2h does not have this slot. Change-Id: Ia355ee385fd0f37793b4bdf1815c033670823eaa Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/187 Tested-by: build bot (Jenkins)
2011-08-29buildgcc: Do not download GDB source code if run with --skip-gdbPeter Stuge
Change-Id: Ida3680418fdd3136752d51cc19f3e14111c12131 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/175 Tested-by: build bot (Jenkins)
2011-08-27Add a few more patterns to .gitignoreSven Schnelle
Change-Id: If7c1c6d9a96dd788bacee72b6e18a435069cad6e Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/172 Tested-by: build bot (Jenkins)
2011-08-27Add dirty flag to git describeSven Schnelle
git describe knows --dirty, which adds -dirty to the verion number if the tree contains uncommited changes. We should add this flag to make it obvious that the COREBOOT_VERSION might be misleading. This is especially important as this version number is now used in the SMBIOS data structures. Change-Id: If4c608c7455e1bbf0cc530c6299fa00eb0fe4d58 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/173 Tested-by: build bot (Jenkins)
2011-08-26X60/T60: remove obsolete dmi.hSven Schnelle
Change-Id: Id0e8bcc1b93a629f0620b84a060d7ff99a82de78 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/174 Tested-by: build bot (Jenkins)
2011-08-26Add automatic SMBIOS table generationSven Schnelle
Change-Id: I0ae16dda8969638a8f70fe1d2e29e992aef3a834 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/152 Tested-by: build bot (Jenkins)
2011-08-25Minor ma785gmt clean-upAlec Ari
Change-Id: I9e889a6c475fb3283fa11f8b3de5baaf54235589 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/167 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-25Fix up various dsdt.asl filesAlec Ari
Change-Id: I46eb27847deb3a903ac9af347992a9954e50ff6e Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/166 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-24Remove dead codeAlec Ari
Remove dead code, copy and pasted from tilapia's mainboard.c file into various asus mainboard.c files Change-Id: Ic715ccaad8ac0210401d4a99ecb11e943f6afe58 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/168 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-21buildgcc: Remove all bashisms, making the script run also on BSDPeter Stuge
Use sed instead of ${variable:start:length} and ${#variable} Use single = in string comparisons Use `eval echo '$'$variable` instead of ${!variable} Use > file 2>&1 instead of &> file Use readlink -f to expand the path of GCC configure Change-Id: Idc7dfcea3922f55630a6855acdb19e36582708bd Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/165 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2011-08-21Use git describe to set KERNELVERSIONPeter Stuge
Change-Id: Id579b19fc38c7ca2b98ad1e87aaec71c070a9178 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/163 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-21buildgcc: Fix typo in check for failed iasl buildPeter Stuge
Change-Id: I3e90b90e807ae775ac66af160a0f8547dcb3597a Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/164 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-19Lenovo H8: Always clear audio muteSven Schnelle
The mute bit is set by ACPI before poweroff/going to suspend. So clear it after resume, to have working volume control even if the ACPI doesn't clear it on resume. OSPM should control Audio mute with ec bit 0x30:6, so it is safe to clear this bit even if the user has audio muted. Change-Id: I18bebe532bf21cfb61b3d294a396bf15012f9f1a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/162 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2011-08-18libpayload: export get_cbfs_header()Patrick Georgi
Keep in sync with coreboot's version. Change-Id: I8a253446bd3b2ce9d05c6076a3f49f0260ecd5f9 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/158 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-18X60: use EC events 0x50/0x58 instead of GPIO GPE for Docking/UndockingSven Schnelle
Change-Id: I674e5166f5fb7ba299e6f1231f30434a5bf731c5 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/161 Tested-by: build bot (Jenkins)
2011-08-18export get_cbfs_header()Sven Schnelle
Change-Id: I4b6afcee3d0d169e03165a7fb48cfaef2e8253e2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/157 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-17libpayload: Some more compatibility (for flashrom)Patrick Georgi
libpci defines an arbitrary set of PCI vendor IDs, flashrom uses the Intel definition. Add it. flashrom also requires inttypes.h, so add the OpenBSD version Change-Id: I9bffd8193f635c375ac4d6b6eae8d3d876b95f5f Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/154 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-16libpayload: EHCI registers are volatilePatrick Georgi
Some gcc versions seem to honor volatile at different places in a struct declaration. Change-Id: I0df2a3fb2eff4cee8cc1b8ac15d9cd9b86178752 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/155 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-14crossgcc: invoke buildgcc with bash, instead of relying on #!/bin/bashJonathan A. Kollasch
Change-Id: I09192e57e2535b2f8f98cabeb755f10c5520c499 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/151 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2011-08-12buildgcc: improve portabilityJonathan A. Kollasch
`cp --remove-destination` isn't as portable as `rm -f` and `cp`. Change-Id: Ib05bfc121f7a0b467f8104920e14fbd02191585f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/150 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-10Add iasl to buldgcc and rev the version.Marc Jones
Change-Id: If9144cdf088f16bc3974a1784a442a1fd12ac75b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/147 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-09Do not compile nuvoton superio for all boardAlexandru Gagniuc
The nuvoton WPCM450 code is compiled for all boards regardless of whether or not they use it. Compile it only for boards needing it. Change-Id: Iaf4cf2c479eb3238863f0771be799f02a8cc3421 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/129 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-09AMD Family 14 Agesa warning fixefdesign98
This change fixes one Agesa warning. Originally this commit included some changes that I later deemed unnecessary. Change-Id: I31ad13bb92509228b89921561c340c95e5136370 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/132 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-06ms7135: add ACPI supportJonathan A. Kollasch
Change-Id: I64a74d3dc0ea2d006ed4b25657d531fb243c2993 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-06Update AMD F14 Agesa to support Rev C0 cpusefdesign98
This change updates the AMD Agesa code to support the Family 14 rev C0 cpus. It also fixes (again) a ton of warnings, although not all of them are gone. The warning fixes affect code in the Family 12 tree as well, so there are some small changes therein. This code has been tested on a Persimmon and passes Abuild. This is the first (and largest) of a number of commits to complete the upgrade. Change-Id: Id28d9bf7931f8baa2a602f6bb096a5a465ccd20d Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/131 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-04Add voltage control of southbridge and RAM on ms7135Jonathan A. Kollasch
Change-Id: I5d79b4838f69cad56d58363608b801f8b1d3ab43 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/126 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04northbridge/intel/i440bx: Registered SDRAM modules support and fixesKeith Hui
Adds support for initializing registered SDRAM modules on Intel 440BX northbridge. Drops unneeded romcc-inspired programming tricks. Only set nbxecc flags (see 440BX datasheet, page 3-16) when a non-ECC module has been detected in a row via SPD; also drops an unneeded intermediate variable used in setting them. Boot tested on ASUS P2B-LS with regular and registered ECC SDRAM under Linux and memtest86+. Change-Id: Idc99d49567cca55f819d6b0e98952b1c3256498a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04libpayload: Add liblzma, libcbfsPatrick Georgi
Add cbfs core from coreboot into libpayload, and to support lzma decode, add coreboot's lzma code, too. Carl-Daniel agreed to relicense the lzmadecode wrapper as BSD-l, solving licensing problems. Change-Id: Id28990fe7e951d99447e265a4880d70a8f208dd2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-04split CBFS support into shared core and extended functionsPatrick Georgi
The core is data structures and basic file finding capabilities, while option ROM handling, and loading stages and payloads is "extended". The core is rewritten to be BSD-l (its header already was), so can be copied to libpayload verbatim. It's also more robust in finding files in corrupted images, eg. after partial erase or update. Change-Id: Ic6923debf8bdf3c67c75746d3b31f3addab3dd74 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/114 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04libpayload: Add PDCurses and ncurses' libform/libmenuPatrick Georgi
PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-04cpu/intel/slot_1: Init L2 cache on SECC(2) CPUs.Keith Hui
Bring from coreboot v1 support for initializing L2 cache on Slot 1 Pentium II/III CPUs, code names Klamath, Deschutes and Katmai. Build tested on ASUS P2B-LS and P3B-F. Boot tested on P2B-LS with Pentium III 600MHz, Katmai core. Also add missing include of model_68x in slot_1, to address a similar problem fixed for model_6bx by r5945. Also change Deschutes CPU init sequence to match Katmai. Change-Id: I502e8481d1a20f0a2504685e7be16b57f59c8257 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-03Remove debugging code, or convert it to be selected by kconfigJonathan A. Kollasch
Change-Id: Ib6cd82badeb6401e065ee14c2a04c78f61a87dd4 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/130 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-03Use preferred style of fixed-width integer typesJonathan A. Kollasch
Change-Id: I1abaaa2af4de940584039f9b8c348bb57fb611e0 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/125 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-26crossgcc: update w32apiPatrick Georgi
crossgcc also needs lzma support as w32api is distributed in .tar.lzma Change-Id: Ia1938fa30262fe0c8bd655a08f9dc731a02e46ba Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/120 Tested-by: build bot (Jenkins)
2011-07-26buildgcc: Break if parts of the toolchain are missingPatrick Georgi
We test for the presence of a couple of tools and even print an error. But the tool didn't stop there. Change-Id: I40dcf7894408ea7b24d5f68c76df4b7541f469bd Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/111 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-22Add xhcbios and ahcibios rom handlingefdesign98
This change adds xhci and ahci bios rom handling that is similar to the vgabios rom handling in the arch/x86 Makefile.inc to the Persimmon and Torpedo mainboards. It also adds the basis for AHCI BIOS rom handling to the Persimmon Kconfig. Change-Id: I527a906323ae483cfa2ca0785f3adb43e88fd84b Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/109 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-22Add the SuperMicro H8QGI platformefdesign98
This set adds support for the SuperMicro H8QGI mainboard. It is a publicly available 4 socket board using AMD Family 10 cpus and AMD SR5650 and SB700 bridges. Change-Id: I196704f79db4c45382559c5ee0619dc8d96ff140 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/108 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-22Add SSE3 dependent codeefdesign98
This change separates out changes that were initially found in the commit for XHCI and AHCI changes to "arch/x86/Makefile. inc". It also corrects a comment. The SSE3 dependent code adds a pair of CR4 access functions and a blob of code that re-sets CR4.OSFXSR and CR4.OSXMMEXCPT. Change-Id: Id97256978da81589d97dcae97981a049101b5258 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/113 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-21Libpayload: default DESTDIR for 'make install'Tadas Slotkus
If you would try download FILO via svn, then you probably get error message about libpayload install. This enables manually installing libpayload in legacy style :) Change-Id: I9f52be939303c5913611f21477d681e11d286382 Signed-off-by: Tadas Slotkus <devtadas@gmail.com> Reviewed-on: http://review.coreboot.org/102 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-20libpayload: Provide dummy getenv()Patrick Georgi
Change-Id: I419fcb16e0b10dee9195072e0e6befa6c9e61a69 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/105 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-18Add AMD Family 10 support to cpu folderefdesign98
This change adds the AMD Family 10 cpu support to the cpu folder. It also updates the makefiles of the Families 12 and 14 to take advantage of a pair of shared files that are moved to the cpu/agesa folder. Change-Id: Ibd3a50ea7a3028bd6a2d2583f021506b73e2fce2 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/97 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-18Add AMD Family 10 cpu support to northbridge folderefdesign98
This change adds the AMD Family 10 cpu support to the northbridge folder. The northbridge/amd/agesa Kconfig and Makefile.inc are changed as well. Change-Id: Id76e9fa388c79ac469a673aaedaa4f1bfd7619d9 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/98 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-18Fix coreboot revision detectionPatrick Georgi
Neither do we publish coreboot via svn, nor is git-svn a useful indicator anymore. Instead, fetch a shortened commit id. Change-Id: I1b990384553209a7d39ecf7f5e8a2db7c7e34d0b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/110 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-17port_enable and port_reset must change atomically.Steven A. Falco
I have observed two separate EHCI host bridges that do not tolerate using C bit-fields to directly manipulate the portsc_t register. The reason for this is that the EHCI spec says that port_enable must go to 0 at the time that port_reset goes to 1. Naturally this cannot be done using direct bit-field manipulation. Instead, we use a temporary variable, change the bit-fields there, then atomically write the new value back to the hardware. Signed-off-by: Steven A. Falco <sfalco@coincident.com> Change-Id: If138faee43e0293efa203b86f7893fdf1e811269 Reviewed-on: http://review.coreboot.org/101 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-16Workaround the errata #181.Rudolf Marek
We use LDTSTOP# to trigger the FID/VID change on K8M890, because the FID/VID SMAF is blocked by not yet configured internal VGA. The memory controller is enabled later, nor the workaround makes any harm to non-affected CPUs. This update unbreaks compilation by declaring the tmp variable. Change-Id: Icf5d126b8c8cd9ece6af41d3129315a777c8cef2 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/69 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-16libpayload: Improve compatibilityPatrick Georgi
Define INT_MAX, EOF and make sure size_t is available. Change-Id: I1b4b717d2545ea8312ec52339300307a5bd68f8a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 23:16:16 +0000