Age | Commit message (Collapse) | Author |
|
According to the latest Tigerlake Platform FSP Integration Guide, the
minimum amount of stack needed for FSP-M is 256KiB. Change
DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined
empirically). JSL requires 192KiB.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic9be6446c4db7f62479deab06ebeba2c7326e681
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I385339761b3e1b5dcadb67b8ca29b1518c2db408
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I95964ac6b5939f66c40bd56939bdf532a72d75ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Northbridge IOAPIC was not being initialized which caused its APIC ID to
be set to 0 (the same APIC ID as BSP).
TEST=boot Debian Linux on PC Engines apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id06ad4c22a56eb3559e1d584fd0fcac1f95f13e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Now that we have it, we might as well pass it around.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: Ia5aa2f932321983f11d2f8869aa624832afe9347
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39721
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Native raminit asserts that the DIMMs haven't been replaced before
reusing the saved training data. However, it does not check if the CPU
is still the same, so it can end up happily reusing data from an Ivy
Bridge CPU onto a Sandy Bridge CPU, which runs the raminit_ivy.c code
path. This can make the CPU run in unsupported configurations, which may
result in an unstable system, or a failure to boot.
To prevent that, ensure that the stored CPUID matches the CPUID of the
installed CPU. If they differ, print a message and do not use the saved
data. As it does not pose a problem for a regular boot, but precludes
resuming from S3, use different loglevels depending on the bootpath.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, works well.
Change-Id: Ib0691f1f849b567579f6afa845c9460e14f8fa27
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of storing an int with a single bit of information taken from
the CPUID, we might as well store the actual CPUID. And since we are
changing the definition of the saved data, bump the version number.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: I6ac435fb83900a52890f823e7614055061299e23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39720
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When changing any of the structures that are cached in non-volatile
storage, it is necessary to bump MRC_CACHE_VERSION so that the old
information is not misinterpreted.
Change-Id: Idefbc38b3a8198b1b5909e775b3c289db689fc0c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39756
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If99fd6511fcea474a1398d2b680e0df4bb1a229b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39755
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Header files are supposed to not make allocations from .bss. Builds
fail if said file is included multiple times. To prevent this from
happening, move the definitions to a C file.
Also, rename raminit_patterns to raminit_tables. This is because more
tables that are not patterns will be added here in subsequent changes.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: If8e3a285ecdc4df9e978ae156be915ced6e1750b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39754
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make them fit in 96 characters, so that Jenkins does not complain.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: I4a763f6050593e9d4db9211bfeedb442724e1ace
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39719
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACPI Spec 2.0 states, that Processor declarations should be made
within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated
and is removed here for Intel CPUs only.
Tested on:
* X11SSH (Kabylake)
* CFL Platform
* Asus P8Z77-V LX2 and Windows 10
FWTS does not return FAIL anymore on ACPI tests
Tested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
According to BKDGs these northbridges should support the K10
compatible temperature sensors.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Icbdf44508085964452d74e084b133f1baa39e1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to BKDGs HTC temperature limit field indicates the threshold
where HTC becomes active. HTC active state means that processor is
limiting its power consumption and maximum P-State. Using this threshold
as _CRT is incorrect, since HTC active is designed to prevent
overheating, not causing immediate shutdown.
Change the behavior of temperature limit to act as a passive cooling
threshold. Make the passive cooling threshold a reference value for
critical and hot temperature with 5 degrees step.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ife64c3aab76f8e125493ecc8183a6e87fb012e3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fixes a blunder in commit 50db9c99be7e09aafb7cfd353bd0ac9878b76fca
(nb/intel/sandybridge: Use DIV_ROUND_UP macro to select timings).
Tested on Asus P8Z77-V LX2, still boots fine with an i7-2600.
Change-Id: I73436b9f7df9f3a065469fb89bcd0cc6183bb774
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
A certain somebody (that would be me) forgot how to count, it seems.
Change-Id: Iac0ac5827ca242c465a2e8be92a823c8fc9b2935
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39741
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Coalescing is not needed, as all PCIe ports are used.
Change-Id: Icf31f6672e0a54d119a6537da1b52c42f9cee823
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39740
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IRQ 0x70 was not declared for device 2e.7, and coreboot whined about it.
Change-Id: If40aa390722cf253169003129b31f20543fde5dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39739
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Linux does not handle either value in any special way, though.
Change-Id: I833cb94e65b9ddfb79edbcdd0216c70740aa4a16
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, Facebook FBG1701 remains unaffected.
Change-Id: I784a5ddc1a8dcbfb960ce970b28b850244a47773
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39663
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add camera ACPI configuration for Ripto/Volteer
BUG=None
BRANCH=None
TEST=Build and boot Ripto or Volteer. Start camera app and able to
capture images.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I2b47ccd989192273a29f09bf097e12e357929334
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This is required for PD notifications on the cros_ec driver.
BUG=b:150649744
TEST=Boot volteer with this patch and verify that PD notifier events are
being generated.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use information provided by AGESA to fill the SMBIOS memory tables.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id73de7c2b23c6eb71722f1c78dbf0d246f429c63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add 8-core desktop CPU support by adding the corresponding PCI IDs.
Tested using "Intel Core(TM) i7-9700E".
Change-Id: I7a2e2e5fd1796deff81b032450242fb58031526d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update Audio AIC UPD settings and gpio pad configs for Tiger Lake.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I45935b79f6fa4ad66238eead9258a4f15feec508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Camera ACPI had an incorrect board config flag for TGL-UP4.
BUG=None
BRANCH=None
TEST=Build and boot TGLRVP-UP3 or UP4. Start camera app and able to
capture images.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Ided0e146a9240169d3f1f27a86218ac1a942b899
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Micron memory part uses SPD Index 0.
BUG=b:152005386
TEST=Build the mainboard.
Change-Id: I990a95b13d636148f0f922fd5c6d4e489d35ed2c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I487fb53bb2b011d214f002fc200ade2f128a4cc6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a script generated list of vboot enabled devices to the
documentation. Add a entry to the release checklist.
Change-Id: Ibb57d26c5f0cb8efd27ca9a97fd762c25b566f93
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If one branch has braces all should have them.
Change-Id: I94e70c6c6188768d9b37a2d154f4d5b8af31f78c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39396
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a function to set the RTC to provided struct tm.
Change-Id: I17b4c1ee0dcc649738ac6a7400b087d07213eaf0
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/23585
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently cbfstool cherry-picks a few files from vboot and hopes these
files will work standalone without any dependencies. This is pretty
brittle (for example, CL:2084062 will break it), and could be improved
by building the whole vboot library and then linking against it.
Therefore, this patch creates a new target $(VBOOT_HOSTLIB) and includes
it as a dependency for cbfstool and ifittool.
To prevent building the vboot lib twice (one for cbfstool and the other
for futility) when building coreboot tools together, add the variable
'VBOOT_BUILD' in Makefile to define a shared build path among different
tools so that vboot files don't need to be recompiled.
Also ignore *.o.d and *.a for vboot library.
BRANCH=none
BUG=none
TEST=make -C util/cbfstool
TEST=make -C util/futility
TEST=Run 'make tools' and make sure common files such as 2sha1.c are
compiled only once
TEST=emerge-nami coreboot-utils
Change-Id: Ifc826896d895f53d69ea559a88f75672c2ec3146
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It does not make sense to disable an optimization that was not enabled
before, especially if that optimization only applies to Ivy Bridge.
Tested, still boots and can suspend correctly with:
- Asus P8Z77-V LX2 with i5-3330 and Windows 10
- Gigabyte GA-H61MA-D3V with i5-2400 and Arch Linux
Change-Id: I9f3eb545585824bbdf51e33f0592e7daa1c425af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It wasn't picked up by the builder due to wrong file name.
Change-Id: Ia31b5d304a0cabd0d578c5ac6181cb1c8ee1c246
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch converts inconsistent white space into tab.
Change-Id: Ibc9d614eabbeb819bfff075e66b2277df4c070dc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Switch to using read* macros instead of pointers.
Change-Id: I1fe54b496a5998597b79cdd7108f3a4075744a78
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch makes PCH_DEV_UART3 macro referring to _PCH_DEV()
rather calling _PCH_DEVFN().
Change-Id: I7bc060c3c5f1e0a0fed194704b4940db73f46985
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CIRTICAL -> CRITICAL
Change-Id: Ie2c1427b197dbfebdc7f0c6ffd85f768845ff1bd
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This patch replaces hard-coded PCI IDs with macros from pci_ids.h and
adds the related IDs to it.
The resulting binary doesn't differ from the one without this patch.
Used documents:
- Intel 322170
Change-Id: I3326f142d483f5008fb2ac878f30c1a3a72f500f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner
|
|
This adds the code required to dump config registers.
Change-Id: Ic78f847ba07240c112492229f9a23f9a88275ad9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the version from native raminit, as it takes the reference clock
into account.
Change-Id: I00e979bec236167d22561e3eb44b30b4a34ad663
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39622
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d67361286da04819def3227b2c6cb41a063fc5b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The single apostrophe confuses the shell that's calling the command.
Change-Id: I7d3183e9a612de0121b2d208c06a45645b8d67f6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
1. Configure Audio GPIOs.
2. Set i2c4 configuration.
3. Update PCH HDA configuration
TEST=Verify codecs gets listed with aplay -l command.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: Ic0516c7a8fee79ce17343a7f42895d6ef534fec9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add HID field in max98357a_config and allow mainboards to set it.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable GPIO functionality in verstage so platforms can read a
PCH GPIO in verstage to determine recovery mode.
BUG=b:151102807
TEST=make build successful
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I4e3b9da307dcf59ab251d8a6a5e09c2a3cfc59fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39501
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check that there are actually USB-PD ports for which to
add data to SSDT, before actually generating SSDT data.
This prevents an empty scope from being generated on
devices without any USB-PD ports, which was breaking
parsing/decompilation on some older platforms (eg,
Braswell).
Test: build/boot google/edgar, verify SSDT table able to
be parsed via iasl after dumping.
Change-Id: Ia213e5815e9160e9b36b2501eeccb6385abef47e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39665
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This register needs to be written to once to lock it down. Do so.
Change-Id: I04bd496d064940b51cb9aa1ded6f5b8853ea7334
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39624
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8896b6c92c3126cc611e47b39d596108b90c6bf2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I005bf205142d4d8c5e12378f33d2100d278fa174
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I78f06b54a6a03d565cf86f1d7bdf37965c3f6ad0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
They are already in AUTHORS.
Change-Id: I315c0c57babfa239e3d7c501a4183b8996999e6e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I6cf3484e46eebd3dc753d0903ea8555712b99b7e
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25440
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Steve Mooney
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating devicetree to enable ELAN touchpad and ELAN touchscreen on nightfury
BUG=none
BRANCH=firmware-hatch-12672.B
TEST=built and verified touchpad and touchscreen worked
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: Ieba6558ce3897ce2f95f51ed667465d84b4ab189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
PMC core driver in OS provides debug hooks to developers and end users
to quickly figure out why their platform is not entering a deeper idle
state such as S0ix. This patch adds INT33A1, a required ACPI device,
to support that PMC core driver in tigerlake platform.
BUG=b:146236297
BRANCH=none
TEST="Build and flash volteer and verify it boots to kernel.
Checked for valid files under /sys/kernel/debug/pmc_core."
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib7e583dc2943461a41d2a7ebde1f16a58a118975
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39587
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PMC core OS driver (intel_pmc_core.c in linux kernel) provides debug
hooks to developers and end users to quickly figure out why their
platform is not entering a deeper idle state such as S0ix.
This patch adds INT33A1 ACPI device to support PMC core OS
driver. Any SoC that supports this feature would include this asl file
to enable the support.
BUG=b:146236297
BRANCH=none
TEST="Build and flash volteer and verify it boots to kernel"
Change-Id: Ib4edc7b636725177d508b62d15633534e9f44236
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2362512
Reviewed-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.corp-partner.google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.corp-partner.google.com>
Commit-Queue: Alex Levin <levinale@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39370
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The VGA port has the DDC on port B.
Select the correct Kconfig and fix graphics init failing on VGA.
Tested on HP Z220, libgfxinit reports success and SeaBIOS is displayed
on the connected VGA monitor.
Change-Id: Ie5ec1a2d4606a21e1dc4217ff6fefe5ee35ac543
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Split common flags that are not specific to the C language out of
$CFLAGS_GCC into $FLAGS_GCC. This way, we can test for C specific
flags, too, without adding them to $ADAFLAGS_*. Currently this is
done for `-Wno-address-of-packed-member` which only applies to C.
Change-Id: Ib793c62656efb07b6e5b3385f1ed1c96a40efd1d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39633
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CACHE_ROM_BASE and CACHE_ROM_SIZE for code caching
parameters.
Tested on OCP Tioga Pass.
Change-Id: Ibba133d9f8fdfbdfae9a0e8e698356a3ca9ba424
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39625
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Andrey Petrov <anpetrov@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DMI link consists of four lanes, grouped in two bundles. Therefore,
some DMI registers may be organized as "per-lane" or "per-bundle". This
can be seen in the DMI initialization sequence as series of equidistant
offsets being programmed with the same value. Make this more obvious by
factoring out the register groups using loops.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: Iebf40b2a5b37ed9060a6660840ea6cdff7eb3fc3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Jasper Lake RVP has DDR4 variant which uses SMBus address to read SPD
data. So, add support to read SPD data from SMBUS.
BUG=None
BRANCH=None
TEST=Check compilation for Jasper Lake RVP and check memory training passes.
Change-Id: I94f8707c731c8afa1106e387a246c000bd53a654
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39401
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We were including stddefs.h and stdint.h but compilation fails when we
use 'bool' type in file.
Removing stddef.h and stdint.h and including 'types.h' which includes
all data types
BUG=None
BRANCH=None
TEST=Check if compilation passes when bool is used
Change-Id: I4c9001f729f3103deba9d1fd631a8942c23276ee
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
This is a µATX mainboard with a LGA1150 socket and four DDR3 DIMM slots.
Working:
- All four DIMM slots
- Serial port to emit spam
- Some USB ports
- Integrated graphics (libgfxinit)
- HDMI and DVI
- Intel GbE
- All PCIe ports
- Both PCI ports behind the ASM1083 PCI bridge
- At least one SATA port
- RAM initialization with MRC binary
- Flashing with flashrom
- S3 suspend/resume
- Rear audio output
- VBT
- SeaBIOS to boot Arch Linux
Not working:
- PS/2 keyboard (detected as mouse)
Untested:
- The other audio jacks
- S/PDIF
- VGA
- EHCI debug
- Front USB headers
- Non-Linux OSes
- TPM header
- Parallel port
Change-Id: I10a16dfc56f2aa88648c8aaaba4feab40c491504
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36770
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Additionally provide a simple script for decoding spd hex files using bincfg.
BUG=b:148561711
TEST=Decoded spd files in zork
BRANCH=None
Change-Id: Ic62868d59e075fd6816d7be55cc935e3e3f82499
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://chromium-review.googlesource.com/2067697
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
BUG=None
TEST=tested in following patches on Trembyle board
Change-Id: Ib30ccd41759e5a2a61d3182cc08ed5eb762eca98
Signed-off-by: Eric Peers <epeers@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1971443
Tested-by: Martin Roth <martinroth@chromium.org>
Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a new device (Family 17h Models 20h-2Fh) to the cpu driver.
Change-Id: Id792533e60813b7509bacd6806f78cd8bba56e37
Signed-off-by: Marshall Dawson <marshall.dawson@amd.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1950713
Reviewed-by: Martin Roth <martinroth@chromium.org>
Tested-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- Reformat some lines of code
- Move MCHBAR registers and documentation into a separate file
- Add a few missing macros
- Rename some registers
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
With BUILD_TIMELESS=1, this commit does not change the result of:
- Asus P8Z77-V LX2 with native raminit.
- Asus P8Z77-M PRO with MRC raminit.
Change-Id: I6e113e48afd685ca63cfcb11ff9fcf9df6e41e46
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39599
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Uppercase `AFE` is an acronym for `Analog Front-End`. As it is a valid
spelling, comment out its entry to prevent false positives.
Change-Id: Ib8612d970d33d4955c572838bda217cfdb49dfe6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
If they were removed instead, it would be too easy to end up adding them
back again. They are kept in a comment so that they can be tracked.
Also, explain why these two entries have been commented out.
Change-Id: I8225944b5e3d1e022af169dda33e0344d4c3bccd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove the list of converted trees now that all are in here. Removal can
be a separate step, but from now on the expectation is that new authors
add themselves to AUTHORS.
Change-Id: Ic0bd0f05a38547a139b90d17f3872f31392bd8a3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The existing Sunrise Point ids are assigned to the wrong implementation,
which would never work for these chipsets. Assign them to the right
dumping implementation, which works for both Sunrise Point PCH-H and
PCH-LP.
This also adds some missing device ids from doc#332691-003EN and
doc#334659-005.
Change-Id: Id102ef3809d675dc9a915d2cb3062e093487fa27
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Correct number of gpio pad group for Jasper Lake SoC.
BUG=None
BRANCH=None
Test=Code compilation for Jasper Lake RVP
Change-Id: I381d0e48430e933569a3b22b66b4e6077383e9e2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
FSP needs to know to allow the root ports for USB4/TBT to be enabled
This patch may need additional checks for each board as it might not
be the right thing to turn them all on for every Tiger Lake board.
BUG=b:141609883
BRANCH=NONE
TEST=Built image and verified that the root ports were visible with lspci
Change-Id: I3f020e20fa8e9fd1ac69d883f4dc1fcbb330a3bf
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update setting of DRS config.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Id38fc224b54c3947af8bbc5c1a4a8d70eb53d5fb
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Set more AC timing items to make the system more stable.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Ibd003582a3ffab1ae91f6378651c2c9e585c4676
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Adds GMM into the baseboard of Octopus
For GLK, PCI device 3 is GMM according to
Document#: 569262(Glk EDS Vol-1 rev2-7)
Related to Gerrit review 39579
BUG=b:151115705
BRANCH=None
TEST=Flashed final image on Chromebook
Change-Id: I75b4a835c18c5eeb542b7f7b89deea45a31e47bd
Signed-off-by: Franklin He <franklinh@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enables Gaussian Mixture Model (GMM) if the pci device is enabled in the
devicetree for Gemini Lake
This ports commit 03ddd190fd6a2e91b16e6fd8a101cf4e11d7cd7b
BUG=b:151115705
BRANCH=none
TEST=Flashed to Chromebook, PCI device enabled in cbmem, userspace app
that uses device still works
Change-Id: I72b1dd78705894f0462c7fbe89b76551950c2392
Signed-off-by: Franklin He <franklinh@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The integrated BT is routed via USB2 port 8, add USB configuration
to support integrated BT enumeration.
Change-Id: I46d8c92ba57cd72a91ee15ef4d11f07824c29e9a
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
There is no need to use hexadecimal values in azalia codec IDs, nor need
to print a redundant "LPC bridge PCI-LPC bridge" comment.
Change-Id: I6658051c7a3d5b65a86ccca8bab7834bf4628a16
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add src/arch to includes.
Change-Id: I157178a055a259e40c57f3915671d3b8966fbb96
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current implementation doesn't allow custom values for the LPC IO
decodes and IO enables.
Add the lpc_ioe and lpc_iod values. If they are not zero, they will be
used instead of the current handling for COMA and COMB.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: Iad7bb0e44739e8d656a542c79af7f98a4e9bde69
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38748
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I18e513cefc373b1cd70d31d1159928cc948a8476
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I57fc98788bb47df16d6aedd0f0701e9991801743
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Print out the name of the file that failed to open.
BUG=none
TEST=rerun build-board.sh with missing files
BRANCH=none
Signed-off-by: Eric Peers <epeers@google.com>
Change-Id: Id8543f25ea827fc8764e0315434b834e65bfa7fb
Reviewed-on: https://chromium-review.googlesource.com/2090667
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Picasso uses a 150MHz reference clock for the Designware I2C devices.
This update allows us to get the correct speeds out.
BUG=b:143885765
TEST=Trembyle has 400kHz I2C clock
Change-Id: Ia888a74e51201b6c911e0e810f0535403204cf60
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1970656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:143885765
TEST=I2C clock speed on trembyle is 400kHz
Change-Id: I50e904822823a6fc173d4d4b76f0882b4ce81ae8
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1970655
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I89b10076e0f4a4b3acd59160fb7abe349b228321
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39611
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is in preparation of replacing all license headers with a spdx
identifier, removal of copyright notices in individual files comes
later.
The missing authors were determined by "git grep Copyright src"
Change-Id: Id9942f9f9a26484bbc22584bba7b3af5846eefe8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I4ed3e7c82ef5808a0e96c07c16f4872f8ca3ec76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Multiple files can eventually take advantage of the static function in
i2c.c. Move get_soc_config() into a new common location for all to use.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: If5d9be2f74cde370979033365af2e355eb6d814e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
On newer kernels (> 4.9 LTS), the GPIO ACPI device's interrupt
resource causes an interrupt storm which prevents the CPU
from properly idling, significantly increasing power consumption.
This was fixed for soc/broadwell (which also supports lynxpoint-lp)
by removing the interrupt resource, so apply the same fix here.
Original fix: https://chromium-review.googlesource.com/203645
Test: build/boot google/wolf, verify CPU0 idles correctly and
power consumption drop via powertop in kernels 4.16.18 and 5.x.
Change-Id: Ic4963f2f0225b5f44a7604b0107911640345c855
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
* Change power sequence to make it closer to ov8856 sensor
data sheet version 2
* Handle different PWREN GPIO pins for up3 and up4
* Add link frequencies definitions to sensor side
* Clean up format
BUG=None
BRANCH=None
TEST=Build and boot TGLRVP U or Y. Start camera app and able to
capture images.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Ic11a36f1f82fe425c1a5796847ce020007064403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39529
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Method RAOW is assuming that the first argument is a Field object
and writing to it expecting the register to get updated. However,
the callers are passing in the value of the Field object instead.
This eventually is resulting the IMGCLK not getting enable/disabled on the
platform.
Fix this by sending the exact address of the register to be updated.
Also MCCT was setting the clock frequency in both case i.e, Clock Enable
and Disable. Split the MCCT method in two, MCON and MCOF to fix the sequencing
like below
MCON:
Set frequency
Enable clock
MCOF:
Disable clock
Also, make use of MCON and MCOF methods for camera clock control in tglrvp.
This is to avoid the buildbot marking the patch unstable.
BUG=None
BRANCH=None
TEST=Build and Boot waddledoo board and verified that IMGCLKOUT for
world facing camera is enabled/disabled and able to capture images.
Build and Boot Tiger Lake RVP board and verified that IMGCLKOUT for
world facing camera is enabled/disabled and able to capture images.
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I8b886255d5f38819502ae1f4af0851b5a0922b22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39498
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tiger Lake Thunderbolt(TBT) has 4 PCIe root ports. Add those TBT
root port devices Id from EDS #575683.
BUG=None
TEST=built image and booted to kernel successfully.
Change-Id: Ia117d63daa15dfb21db28fd76723e97ab030da92
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39526
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set FSP params PchSirqEnable/PchSirqMode based on board
setting of serirq_mode. Matches implementation on Skylake.
This is a no-change for existing boards since the default
remains SERIRQ_QUIET mode.
Tested on system76 galp3-c, out-of-tree WHL-U board
Change-Id: I9ad4f5a6c7391fc6e813ec1306c708f449a69f59
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Nathaniel L Desimone <nathaniel.l.desimone@intel.com>
|
|
On a device/option-rom ID mismatch, the option rom's IDs would get
shown twice instead of showing the actual device's IDs. This was
very confusing because the error showed matching IDs.
BUG=None
TEST=Shows mismatched IDs when option rom doesn't match the hardware
Change-Id: I5a06d6a7319aa653c8a5e32ec3c5afb651d83140
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2013180
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Foob360 would prefer to use different SAR values. Since Foob360
sku id is 9.
BUG=b:149362272
BRANCH=octopus
TEST=build
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|